From: Bhupinder Thakur <bhupinder.thakur@linaro.org>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>
Subject: [PATCH 02/11] xen/arm: vpl011: Add new hvm params in Xen for ring buffer/event setup
Date: Tue, 21 Feb 2017 16:55:59 +0530 [thread overview]
Message-ID: <1487676368-22356-3-git-send-email-bhupinder.thakur@linaro.org> (raw)
In-Reply-To: <1487676368-22356-1-git-send-email-bhupinder.thakur@linaro.org>
Three new HVM param handlers added for:
- allocating a new VIRQ and return to the toolstack
- allocating a new event channel for sending/receiving events from Xen and return
to the toolstack
- mapping the PFN allocted by the toolstack to be used as IN/OUT ring buffers
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
---
xen/arch/arm/hvm.c | 39 +++++++++++++++++++++++++++++++++++++++
xen/include/public/hvm/params.h | 10 +++++++++-
2 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/xen/arch/arm/hvm.c b/xen/arch/arm/hvm.c
index d999bde..f3b9eb1 100644
--- a/xen/arch/arm/hvm.c
+++ b/xen/arch/arm/hvm.c
@@ -23,6 +23,8 @@
#include <xen/guest_access.h>
#include <xen/sched.h>
#include <xen/monitor.h>
+#include <xen/event.h>
+#include <xen/vmap.h>
#include <xsm/xsm.h>
@@ -31,6 +33,7 @@
#include <public/hvm/hvm_op.h>
#include <asm/hypercall.h>
+#include "vpl011.h"
long do_hvm_op(unsigned long op, XEN_GUEST_HANDLE_PARAM(void) arg)
{
@@ -61,9 +64,45 @@ long do_hvm_op(unsigned long op, XEN_GUEST_HANDLE_PARAM(void) arg)
if ( op == HVMOP_set_param )
{
d->arch.hvm_domain.params[a.index] = a.value;
+
+#ifdef CONFIG_VPL011_CONSOLE
+ /*
+ * if it is a vpl011 console pfn then map it to its
+ * own address space
+ */
+ if ( a.index == HVM_PARAM_VPL011_CONSOLE_PFN )
+ {
+ vpl011_map_guest_page(d);
+ }
+#else
+ /*
+ * if VPL011 is not compiled in then disallow setting of any
+ * related HVM params
+ */
+ if ( a.index == HVM_PARAM_VPL011_CONSOLE_PFN ||
+ a.index == HVM_PARAM_VPL011_CONSOLE_EVTCHN ||
+ a.index == HVM_PARAM_VPL011_VIRQ )
+ {
+ rc = -1;
+ goto param_fail;
+ }
+#endif
}
else
{
+#ifndef CONFIG_VPL011_CONSOLE
+ /*
+ * if VPL011 is not compiled in then disallow setting of any
+ * related HVM params
+ */
+ if ( a.index == HVM_PARAM_VPL011_CONSOLE_PFN ||
+ a.index == HVM_PARAM_VPL011_CONSOLE_EVTCHN ||
+ a.index == HVM_PARAM_VPL011_VIRQ )
+ {
+ rc = -1;
+ goto param_fail;
+ }
+#endif
a.value = d->arch.hvm_domain.params[a.index];
rc = copy_to_guest(arg, &a, 1) ? -EFAULT : 0;
}
diff --git a/xen/include/public/hvm/params.h b/xen/include/public/hvm/params.h
index 3f54a49..13bf719 100644
--- a/xen/include/public/hvm/params.h
+++ b/xen/include/public/hvm/params.h
@@ -203,10 +203,17 @@
*/
#define HVM_PARAM_ACPI_IOPORTS_LOCATION 19
-/* Deprecated */
+#if defined(__arm__) || defined(__aarch64__)
+#define HVM_PARAM_VPL011_CONSOLE_PFN 20
+#define HVM_PARAM_VPL011_CONSOLE_EVTCHN 21
+#define HVM_PARAM_VPL011_VIRQ 22
+#else
#define HVM_PARAM_MEMORY_EVENT_CR0 20
#define HVM_PARAM_MEMORY_EVENT_CR3 21
#define HVM_PARAM_MEMORY_EVENT_CR4 22
+#endif
+
+/* Deprecated */
#define HVM_PARAM_MEMORY_EVENT_INT3 23
#define HVM_PARAM_MEMORY_EVENT_SINGLE_STEP 25
#define HVM_PARAM_MEMORY_EVENT_MSR 30
@@ -253,6 +260,7 @@
*/
#define HVM_PARAM_X87_FIP_WIDTH 36
+
#define HVM_NR_PARAMS 37
#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
--
2.7.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-02-21 11:26 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 11:25 [PATCH 00/11] pl011 emulation support in Xen Bhupinder Thakur
2017-02-21 11:25 ` [PATCH 01/11] xen/arm: vpl011: Add pl011 uart emulation " Bhupinder Thakur
2017-02-26 21:37 ` Julien Grall
2017-03-03 19:19 ` Julien Grall
2017-03-21 13:27 ` Bhupinder Thakur
2017-03-21 19:38 ` Julien Grall
2017-03-23 9:44 ` Bhupinder Thakur
2017-03-23 13:51 ` Julien Grall
2017-03-03 19:59 ` Konrad Rzeszutek Wilk
2017-03-05 1:04 ` Julien Grall
2017-03-06 14:22 ` Konrad Rzeszutek Wilk
2017-03-05 1:15 ` Julien Grall
2017-03-05 11:59 ` Julien Grall
2017-03-22 5:50 ` Bhupinder Thakur
2017-03-05 12:12 ` Julien Grall
2017-03-23 9:14 ` Bhupinder Thakur
2017-03-23 14:16 ` Julien Grall
2017-03-24 10:39 ` Bhupinder Thakur
2017-02-21 11:25 ` Bhupinder Thakur [this message]
2017-03-03 20:02 ` [PATCH 02/11] xen/arm: vpl011: Add new hvm params in Xen for ring buffer/event setup Konrad Rzeszutek Wilk
2017-03-24 6:58 ` Bhupinder Thakur
2017-03-05 12:35 ` Julien Grall
2017-03-06 8:06 ` Jan Beulich
2017-03-06 11:42 ` Julien Grall
2017-03-06 12:41 ` Jan Beulich
2017-03-06 13:21 ` Julien Grall
2017-03-06 13:48 ` Jan Beulich
2017-03-08 14:45 ` Julien Grall
2017-03-08 15:21 ` Jan Beulich
2017-03-08 18:22 ` Stefano Stabellini
2017-04-11 14:38 ` Bhupinder Thakur
2017-04-11 22:07 ` Stefano Stabellini
2017-04-14 7:12 ` Bhupinder Thakur
2017-04-19 18:43 ` Stefano Stabellini
2017-03-06 14:48 ` George Dunlap
2017-03-08 13:52 ` Julien Grall
2017-03-24 7:31 ` Bhupinder Thakur
2017-02-21 11:26 ` [PATCH 03/11] xen/arm: vpl011: Refactor evtchn_send in Xen to allow sending events from a xen bound channel Bhupinder Thakur
2017-03-03 21:13 ` Konrad Rzeszutek Wilk
2017-03-06 10:16 ` Bhupinder Thakur
2017-03-06 10:35 ` Jan Beulich
2017-03-05 12:39 ` Julien Grall
2017-03-06 8:15 ` Jan Beulich
2017-03-06 10:44 ` Bhupinder Thakur
2017-03-06 10:54 ` Jan Beulich
2017-03-06 11:12 ` Bhupinder Thakur
2017-03-28 9:43 ` Bhupinder Thakur
2017-02-21 11:26 ` [PATCH 04/11] xen/arm: vpl011: Enable vpl011 emulation for a domain in Xen Bhupinder Thakur
2017-03-03 21:47 ` Konrad Rzeszutek Wilk
2017-03-05 12:46 ` Julien Grall
2017-03-06 8:27 ` Jan Beulich
2017-02-21 11:26 ` [PATCH 05/11] xen/arm: vpl011: Initialize nr_spis in vgic_init in Xen to atleast 1 Bhupinder Thakur
2017-03-03 20:49 ` Konrad Rzeszutek Wilk
2017-03-05 12:51 ` Julien Grall
2017-03-16 6:50 ` Bhupinder Thakur
2017-03-16 8:24 ` Julien Grall
2017-03-16 10:31 ` Bhupinder Thakur
2017-03-16 13:24 ` Julien Grall
2017-03-20 16:29 ` Bhupinder Thakur
2017-02-21 11:26 ` [PATCH 06/11] xen/arm: vpl011: Add a new pl011 uart node in the guest DT in the toolstack Bhupinder Thakur
2017-03-03 20:15 ` Konrad Rzeszutek Wilk
2017-03-03 21:03 ` Konrad Rzeszutek Wilk
2017-03-05 12:59 ` Julien Grall
2017-03-05 13:04 ` Julien Grall
2017-03-14 13:00 ` Wei Liu
2017-02-21 11:26 ` [PATCH 07/11] xen/arm: vpl011: Add two new vpl011 parameters to xenstore Bhupinder Thakur
2017-03-03 20:58 ` Konrad Rzeszutek Wilk
2017-03-28 7:49 ` Bhupinder Thakur
2017-02-21 11:26 ` [PATCH 08/11] xen/arm: vpl011: Allocate a new PFN in the toolstack and pass to Xen using a hvm call Bhupinder Thakur
2017-03-03 20:51 ` Konrad Rzeszutek Wilk
2017-03-05 13:07 ` Julien Grall
2017-02-21 11:26 ` [PATCH 09/11] xen/arm: vpl011: Modify domain_create_ring in xenconsole to map the ring buffer and event channel Bhupinder Thakur
2017-03-03 21:46 ` Konrad Rzeszutek Wilk
2017-02-21 11:26 ` [PATCH 10/11] xen/arm: vpl011: Modify handle_ring_read and buffer_append to read/append vpl011 data Bhupinder Thakur
2017-03-03 21:06 ` Konrad Rzeszutek Wilk
2017-02-21 11:26 ` [PATCH 11/11] xen/arm: vpl011: Modify handle_tty_read in xenconsole to redirect user data to vpl011 IN ring buffer Bhupinder Thakur
2017-03-03 21:17 ` Konrad Rzeszutek Wilk
2017-03-03 20:23 ` [PATCH 00/11] pl011 emulation support in Xen Konrad Rzeszutek Wilk
2017-03-03 21:15 ` Konrad Rzeszutek Wilk
2017-03-14 7:44 ` Bhupinder Thakur
2017-03-05 11:46 ` Julien Grall
2017-03-14 7:47 ` Bhupinder Thakur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487676368-22356-3-git-send-email-bhupinder.thakur@linaro.org \
--to=bhupinder.thakur@linaro.org \
--cc=julien.grall@arm.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).