From: Chao Gao <chao.gao@intel.com>
To: xen-devel@lists.xen.org
Cc: yang.zhang.wz@gmail.com, "Xuquan (Quan Xu)" <xuquan8@huawei.com>,
quan.xu0@gmail.com, Jun Nakajima <jun.nakajima@intel.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Kevin Tian <kevin.tian@intel.com>,
Jan Beulich <jbeulich@suse.com>, Chao Gao <chao.gao@intel.com>
Subject: [PATCH v4] x86/apicv: Fix wrong IPI suppression during posted interrupt delivery
Date: Fri, 3 Mar 2017 10:35:43 +0800 [thread overview]
Message-ID: <1488508543-30295-1-git-send-email-chao.gao@intel.com> (raw)
__vmx_deliver_posted_interrupt() wrongly used a softirq bit to decide whether
to suppress an IPI. Its logic was: the first time an IPI was sent, we set
the softirq bit. Next time, we would check that softirq bit before sending
another IPI. If the 1st IPI arrived at the pCPU which was in
non-root mode, the hardware would consume the IPI and sync PIR to vIRR.
During the process, no one (both hardware and software) will clear the
softirq bit. As a result, the following IPI would be wrongly suppressed.
This patch discards the suppression check, always sending an IPI.
The softirq also need to be raised. But there is a little change.
This patch moves the place where we raise a softirq for
'cpu != smp_processor_id()' case to the IPI interrupt handler.
Namely, don't raise a softirq for this case and set the interrupt handler
to pi_notification_interrupt()(in which a softirq is raised) regardless of
VT-d PI enabled or not. The only difference is when an IPI arrives at the
pCPU which is happened in non-root mode, the code will not raise a useless
softirq since the IPI is consumed by hardware rather than raise a softirq
unconditionally.
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
---
v4:
- Replace patch v3 title "Enhance posted-interrupt processing" with the
current title.
- Desciption changes
- Fix a compiler error
---
xen/arch/x86/hvm/vmx/vmx.c | 50 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 43 insertions(+), 7 deletions(-)
diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c
index 5b1717d..1a0e130 100644
--- a/xen/arch/x86/hvm/vmx/vmx.c
+++ b/xen/arch/x86/hvm/vmx/vmx.c
@@ -1842,13 +1842,53 @@ static void __vmx_deliver_posted_interrupt(struct vcpu *v)
bool_t running = v->is_running;
vcpu_unblock(v);
+ /*
+ * Just like vcpu_kick(), nothing is needed for the following two cases:
+ * 1. The target vCPU is not running, meaning it is blocked or runnable.
+ * 2. The target vCPU is the current vCPU and we're in non-interrupt
+ * context.
+ */
if ( running && (in_irq() || (v != current)) )
{
+ /*
+ * Note: Only two cases will reach here:
+ * 1. The target vCPU is running on other pCPU.
+ * 2. The target vCPU is the current vCPU.
+ *
+ * Note2: Don't worry the v->processor may change. The vCPU being
+ * moved to another processor is guaranteed to sync PIR to vIRR,
+ * due to the involved scheduling cycle.
+ */
unsigned int cpu = v->processor;
- if ( !test_and_set_bit(VCPU_KICK_SOFTIRQ, &softirq_pending(cpu))
- && (cpu != smp_processor_id()) )
+ /*
+ * For case 1, we send an IPI to the pCPU. When an IPI arrives, the
+ * target vCPU maybe is running in non-root mode, running in root
+ * mode, runnable or blocked. If the target vCPU is running in
+ * non-root mode, the hardware will sync PIR to vIRR for
+ * 'posted_intr_vector' is special to the pCPU. If the target vCPU is
+ * running in root-mode, the interrupt handler starts to run.
+ * Considering an IPI may arrive in the window between the call to
+ * vmx_intr_assist() and interrupts getting disabled, the interrupt
+ * handler should raise a softirq to ensure events will be delivered
+ * in time. If the target vCPU is runnable, it will sync PIR to
+ * vIRR next time it is chose to run. In this case, a IPI and a
+ * softirq is sent to a wrong vCPU which will not have any adverse
+ * effect. If the target vCPU is blocked, since vcpu_block() checks
+ * whether there is an event to be delivered through
+ * local_events_need_delivery() just after blocking, the vCPU must
+ * have synced PIR to vIRR. Similarly, there is a IPI and a softirq
+ * sent to a wrong vCPU.
+ */
+ if ( cpu != smp_processor_id() )
send_IPI_mask(cpumask_of(cpu), posted_intr_vector);
+ /*
+ * For case 2, raising a softirq ensures PIR will be synced to vIRR.
+ * As any softirq will do, as an optimization we only raise one if
+ * none is pending already.
+ */
+ else if ( !softirq_pending(cpu) )
+ raise_softirq(VCPU_KICK_SOFTIRQ);
}
}
@@ -2281,13 +2321,9 @@ const struct hvm_function_table * __init start_vmx(void)
if ( cpu_has_vmx_posted_intr_processing )
{
+ alloc_direct_apic_vector(&posted_intr_vector, pi_notification_interrupt);
if ( iommu_intpost )
- {
- alloc_direct_apic_vector(&posted_intr_vector, pi_notification_interrupt);
alloc_direct_apic_vector(&pi_wakeup_vector, pi_wakeup_interrupt);
- }
- else
- alloc_direct_apic_vector(&posted_intr_vector, event_check_interrupt);
}
else
{
--
1.8.3.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next reply other threads:[~2017-03-03 2:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 2:35 Chao Gao [this message]
2017-03-06 3:53 ` [PATCH v4] x86/apicv: Fix wrong IPI suppression during posted interrupt delivery Xuquan (Quan Xu)
2017-03-05 22:49 ` Chao Gao
2017-03-06 6:13 ` Xuquan (Quan Xu)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488508543-30295-1-git-send-email-chao.gao@intel.com \
--to=chao.gao@intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=jun.nakajima@intel.com \
--cc=kevin.tian@intel.com \
--cc=quan.xu0@gmail.com \
--cc=xen-devel@lists.xen.org \
--cc=xuquan8@huawei.com \
--cc=yang.zhang.wz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).