From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: xen-devel@lists.xen.org
Cc: sstabellini@kernel.org, wei.liu2@citrix.com,
George.Dunlap@eu.citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com, tim@xen.org, jbeulich@suse.com,
Boris Ostrovsky <boris.ostrovsky@oracle.com>
Subject: [PATCH v1 3/9] mm: Scrub pages in alloc_heap_pages() if needed
Date: Fri, 24 Mar 2017 13:04:58 -0400 [thread overview]
Message-ID: <1490375104-15450-4-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1490375104-15450-1-git-send-email-boris.ostrovsky@oracle.com>
When allocating pages in alloc_heap_pages() first look for clean pages. If none
is found then retry, take pages marked as unscrubbed and scrub them.
Note that we shouldn't find unscrubbed pages in alloc_heap_pages() yet. However,
this will become possible when we stop scrubbing from free_heap_pages() and
instead do it from idle loop.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
xen/common/page_alloc.c | 93 +++++++++++++++++++++++++++++++++++------------
1 files changed, 69 insertions(+), 24 deletions(-)
diff --git a/xen/common/page_alloc.c b/xen/common/page_alloc.c
index a28eb38..61f873a 100644
--- a/xen/common/page_alloc.c
+++ b/xen/common/page_alloc.c
@@ -691,34 +691,17 @@ static struct page_info *alloc_heap_pages(
unsigned int order, unsigned int memflags,
struct domain *d)
{
- unsigned int i, j, zone = 0, nodemask_retry = 0;
- nodeid_t first_node, node = MEMF_get_node(memflags), req_node = node;
+ unsigned int i, j, zone, nodemask_retry;
+ nodeid_t first_node, node, req_node;
unsigned long request = 1UL << order;
struct page_info *pg;
- nodemask_t nodemask = (d != NULL ) ? d->node_affinity : node_online_map;
- bool_t need_tlbflush = 0;
+ nodemask_t nodemask;
+ bool_t need_scrub, need_tlbflush = 0, use_unscrubbed = 0;
uint32_t tlbflush_timestamp = 0;
/* Make sure there are enough bits in memflags for nodeID. */
BUILD_BUG_ON((_MEMF_bits - _MEMF_node) < (8 * sizeof(nodeid_t)));
- if ( node == NUMA_NO_NODE )
- {
- if ( d != NULL )
- {
- node = next_node(d->last_alloc_node, nodemask);
- if ( node >= MAX_NUMNODES )
- node = first_node(nodemask);
- }
- if ( node >= MAX_NUMNODES )
- node = cpu_to_node(smp_processor_id());
- }
- first_node = node;
-
- ASSERT(node < MAX_NUMNODES);
- ASSERT(zone_lo <= zone_hi);
- ASSERT(zone_hi < NR_ZONES);
-
if ( unlikely(order > MAX_ORDER) )
return NULL;
@@ -732,7 +715,10 @@ static struct page_info *alloc_heap_pages(
total_avail_pages + tmem_freeable_pages()) &&
((memflags & MEMF_no_refcount) ||
!d || d->outstanding_pages < request) )
- goto not_found;
+ {
+ spin_unlock(&heap_lock);
+ return NULL;
+ }
/*
* TMEM: When available memory is scarce due to tmem absorbing it, allow
@@ -745,6 +731,28 @@ static struct page_info *alloc_heap_pages(
tmem_freeable_pages() )
goto try_tmem;
+ again:
+
+ nodemask_retry = 0;
+ nodemask = (d != NULL ) ? d->node_affinity : node_online_map;
+ node = req_node = MEMF_get_node(memflags);
+ if ( node == NUMA_NO_NODE )
+ {
+ if ( d != NULL )
+ {
+ node = next_node(d->last_alloc_node, nodemask);
+ if ( node >= MAX_NUMNODES )
+ node = first_node(nodemask);
+ }
+ if ( node >= MAX_NUMNODES )
+ node = cpu_to_node(smp_processor_id());
+ }
+ first_node = node;
+
+ ASSERT(node < MAX_NUMNODES);
+ ASSERT(zone_lo <= zone_hi);
+ ASSERT(zone_hi < NR_ZONES);
+
/*
* Start with requested node, but exhaust all node memory in requested
* zone before failing, only calc new node value if we fail to find memory
@@ -760,8 +768,16 @@ static struct page_info *alloc_heap_pages(
/* Find smallest order which can satisfy the request. */
for ( j = order; j <= MAX_ORDER; j++ )
+ {
if ( (pg = page_list_remove_head(&heap(node, zone, j))) )
- goto found;
+ {
+ if ( (order == 0) || use_unscrubbed ||
+ !test_bit(_PGC_need_scrub, &pg->count_info) )
+ goto found;
+
+ page_list_add_tail(pg, &heap(node, zone, j));
+ }
+ }
} while ( zone-- > zone_lo ); /* careful: unsigned zone may wrap */
if ( (memflags & MEMF_exact_node) && req_node != NUMA_NO_NODE )
@@ -800,18 +816,38 @@ static struct page_info *alloc_heap_pages(
}
not_found:
+ /*
+ * If we couldn't find clean page let's search again and this time
+ * take unscrubbed pages if available.
+ */
+ if ( !use_unscrubbed )
+ {
+ use_unscrubbed = 1;
+ goto again;
+ }
+
/* No suitable memory blocks. Fail the request. */
spin_unlock(&heap_lock);
return NULL;
found:
+ need_scrub = !!test_bit(_PGC_need_scrub, &pg->count_info);
+
/* We may have to halve the chunk a number of times. */
while ( j != order )
{
PFN_ORDER(pg) = --j;
- page_list_add(pg, &heap(node, zone, j));
+ if ( need_scrub )
+ {
+ pg->count_info |= PGC_need_scrub;
+ page_list_add_tail(pg, &heap(node, zone, j));
+ }
+ else
+ page_list_add(pg, &heap(node, zone, j));
pg += 1 << j;
}
+ if ( need_scrub )
+ pg->count_info |= PGC_need_scrub;
ASSERT(avail[node][zone] >= request);
avail[node][zone] -= request;
@@ -823,6 +859,15 @@ static struct page_info *alloc_heap_pages(
if ( d != NULL )
d->last_alloc_node = node;
+ if ( need_scrub )
+ {
+ for ( i = 0; i < (1 << order); i++ )
+ scrub_one_page(&pg[i]);
+ pg->count_info &= ~PGC_need_scrub;
+ node_need_scrub[node] -= (1 << order);
+ }
+
+
for ( i = 0; i < (1 << order); i++ )
{
/* Reference count must continuously be zero for free pages. */
--
1.7.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-03-24 17:04 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-24 17:04 [PATCH v1 0/9] Memory scrubbing from idle loop Boris Ostrovsky
2017-03-24 17:04 ` [PATCH v1 1/9] mm: Separate free page chunk merging into its own routine Boris Ostrovsky
2017-03-27 15:16 ` Wei Liu
2017-03-27 16:03 ` Jan Beulich
2017-03-27 16:28 ` Boris Ostrovsky
2017-03-28 7:27 ` Jan Beulich
2017-03-28 19:20 ` Wei Liu
2017-03-28 19:41 ` Boris Ostrovsky
2017-03-28 19:44 ` Wei Liu
2017-03-28 19:57 ` Boris Ostrovsky
2017-03-24 17:04 ` [PATCH v1 2/9] mm: Place unscrubbed pages at the end of pagelist Boris Ostrovsky
2017-03-28 19:27 ` Wei Liu
2017-03-28 19:46 ` Boris Ostrovsky
2017-03-24 17:04 ` Boris Ostrovsky [this message]
2017-03-28 19:43 ` [PATCH v1 3/9] mm: Scrub pages in alloc_heap_pages() if needed Wei Liu
2017-03-24 17:04 ` [PATCH v1 4/9] mm: Scrub memory from idle loop Boris Ostrovsky
2017-03-28 20:01 ` Wei Liu
2017-03-28 20:14 ` Boris Ostrovsky
2017-03-24 17:05 ` [PATCH v1 5/9] mm: Do not discard already-scrubbed pages if softirqs are pending Boris Ostrovsky
2017-03-29 10:22 ` Wei Liu
2017-03-24 17:05 ` [PATCH v1 6/9] spinlock: Introduce spin_lock_cb() Boris Ostrovsky
2017-03-29 10:28 ` Wei Liu
2017-03-29 13:47 ` Boris Ostrovsky
2017-03-29 14:07 ` Boris Ostrovsky
2017-03-24 17:05 ` [PATCH v1 7/9] mm: Keep pages available for allocation while scrubbing Boris Ostrovsky
2017-03-24 17:05 ` [PATCH v1 8/9] mm: Print number of unscrubbed pages in 'H' debug handler Boris Ostrovsky
2017-03-28 20:11 ` Wei Liu
2017-03-24 17:05 ` [PATCH v1 9/9] mm: Make sure pages are scrubbed Boris Ostrovsky
2017-03-29 10:39 ` Wei Liu
2017-03-29 16:25 ` Wei Liu
2017-03-29 16:35 ` Boris Ostrovsky
2017-03-29 16:45 ` Wei Liu
2017-03-29 17:12 ` Andrew Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490375104-15450-4-git-send-email-boris.ostrovsky@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=George.Dunlap@eu.citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=sstabellini@kernel.org \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).