xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Wei Chen <Wei.Chen@arm.com>
To: xen-devel@lists.xen.org
Cc: sstabellini@kernel.org, wei.chen@arm.com, steve.capper@arm.com,
	Kaly.Xin@arm.com, julien.grall@arm.com, nd@arm.com
Subject: [PATCH v2 06/19] xen/arm: Save HCR_EL2 when a guest took the SError
Date: Thu, 30 Mar 2017 17:13:16 +0800	[thread overview]
Message-ID: <1490865209-18283-7-git-send-email-Wei.Chen@arm.com> (raw)
In-Reply-To: <1490865209-18283-1-git-send-email-Wei.Chen@arm.com>

The HCR_EL2.VSE (HCR.VA for aarch32) bit can be used to generate a
virtual abort to guest. The HCR_EL2.VSE bit has a peculiar feature
of getting cleared when the guest has taken the abort (this is the
only bit that behaves as such in HCR_EL2 register).

This means that if we set the HCR_EL2.VSE bit to signal such an abort,
we must preserve it in the guest context until it disappears from
HCR_EL2, and at which point it must be cleared from the context. This
is achieved by reading back from HCR_EL2 until the guest takes the
fault.

If we preserved a pending VSE in guest context, we have to restore
it to HCR_EL2 when context switch to this guest. This is achieved
by writing saved HCR_EL2 value in guest context back to HCR_EL2
register before return to guest. This had been done by the patch
of "Restore HCR_EL2 register".

Signed-off-by: Wei Chen <Wei.Chen@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
---
 xen/arch/arm/traps.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
index 48b3e3c..7762d18 100644
--- a/xen/arch/arm/traps.c
+++ b/xen/arch/arm/traps.c
@@ -2622,7 +2622,18 @@ static void do_trap_smc(struct cpu_user_regs *regs, const union hsr hsr)
 static void enter_hypervisor_head(struct cpu_user_regs *regs)
 {
     if ( guest_mode(regs) )
+    {
+        /*
+         * If we pended a virtual abort, preserve it until it gets cleared.
+         * See ARM ARM DDI 0487A.j D1.14.3 (Virtual Interrupts) for details,
+         * but the crucial bit is "On taking a vSError interrupt, HCR_EL2.VSE
+         * (alias of HCR.VA) is cleared to 0."
+         */
+        if ( current->arch.hcr_el2 & HCR_VA )
+            current->arch.hcr_el2 = READ_SYSREG(HCR_EL2);
+
         gic_clear_lrs(current);
+    }
 }
 
 asmlinkage void do_trap_hypervisor(struct cpu_user_regs *regs)
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

  parent reply	other threads:[~2017-03-30  9:13 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-30  9:13 [PATCH v2 00/19] Provide a command line option to choose how to handle SErrors Wei Chen
2017-03-30  9:13 ` [PATCH v2 01/19] xen/arm: Save ESR_EL2 to avoid using mismatched value in syndrome check Wei Chen
2017-03-30 13:31   ` Julien Grall
2017-03-31  3:26     ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 02/19] xen/arm: Remove vwfi while setting HCR_EL2 in init_traps Wei Chen
2017-03-30 17:05   ` Julien Grall
2017-03-30 22:29     ` Stefano Stabellini
2017-03-31  5:58       ` Wei Chen
2017-03-31  8:34       ` Julien Grall
2017-03-30  9:13 ` [PATCH v2 03/19] xen/arm: Move parse_vwfi from trap.c to domain.c Wei Chen
2017-03-30  9:13 ` [PATCH v2 04/19] xen/arm: Restore HCR_EL2 register Wei Chen
2017-03-30 17:07   ` Julien Grall
2017-03-30 22:03     ` Stefano Stabellini
2017-03-31  2:10       ` Wei Chen
2017-03-31  8:39         ` Julien Grall
2017-03-31  8:59           ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 05/19] xen/arm: Avoid setting/clearing HCR_RW at every context switch Wei Chen
2017-03-30 17:12   ` Julien Grall
2017-03-30 21:21   ` Stefano Stabellini
2017-03-30  9:13 ` Wei Chen [this message]
2017-03-30  9:13 ` [PATCH v2 07/19] xen/arm: Introduce a virtual abort injection helper Wei Chen
2017-03-30 17:20   ` Julien Grall
2017-03-30 21:24     ` Stefano Stabellini
2017-03-31  5:25     ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 08/19] xen/arm: Introduce a command line parameter for SErrors/Aborts Wei Chen
2017-03-30 17:39   ` Julien Grall
2017-03-31  5:28     ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 09/19] xen/arm: Introduce a initcall to update cpu_hwcaps by serror_op Wei Chen
2017-03-30 17:51   ` Julien Grall
2017-03-30 18:02   ` Julien Grall
2017-03-30 21:28     ` Stefano Stabellini
2017-03-31  8:50       ` Julien Grall
2017-03-30  9:13 ` [PATCH v2 10/19] xen/arm64: Use alternative to skip the check of pending serrors Wei Chen
2017-03-30  9:13 ` [PATCH v2 11/19] xen/arm32: " Wei Chen
2017-03-30 18:06   ` Julien Grall
2017-03-30 21:29     ` Stefano Stabellini
2017-03-31  5:33       ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 12/19] xen/arm: Move macro VABORT_GEN_BY_GUEST to common header Wei Chen
2017-03-30 21:36   ` Stefano Stabellini
2017-03-31  5:35     ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 13/19] xen/arm: Introduce new helpers to handle guest/hyp SErrors Wei Chen
2017-03-30  9:13 ` [PATCH v2 14/19] xen/arm: Replace do_trap_guest_serror with new helpers Wei Chen
2017-03-30  9:13 ` [PATCH v2 15/19] xen/arm: Unmask the Abort/SError bit in the exception entries Wei Chen
2017-03-30  9:13 ` [PATCH v2 16/19] xen/arm: Introduce a helper to synchronize SError Wei Chen
2017-03-30 18:28   ` Julien Grall
2017-03-30 18:32     ` Julien Grall
2017-03-30 18:37       ` Julien Grall
2017-03-31  5:51         ` Wei Chen
2017-03-31 10:55         ` Wei Chen
2017-03-31 11:06           ` Julien Grall
2017-03-31 11:09             ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 17/19] xen/arm: Isolate the SError between the context switch of 2 vCPUs Wei Chen
2017-03-30 21:49   ` Stefano Stabellini
2017-03-30 22:00     ` Julien Grall
2017-03-31  5:52       ` Wei Chen
2017-03-30  9:13 ` [PATCH v2 18/19] xen/arm: Prevent slipping hypervisor SError to guest Wei Chen
2017-03-30  9:13 ` [PATCH v2 19/19] xen/arm: Handle guest external abort as guest SError Wei Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490865209-18283-7-git-send-email-Wei.Chen@arm.com \
    --to=wei.chen@arm.com \
    --cc=Kaly.Xin@arm.com \
    --cc=julien.grall@arm.com \
    --cc=nd@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=steve.capper@arm.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).