From: Yi Sun <yi.y.sun@linux.intel.com>
To: xen-devel@lists.xenproject.org
Cc: kevin.tian@intel.com, wei.liu2@citrix.com,
andrew.cooper3@citrix.com, dario.faggioli@citrix.com,
he.chen@linux.intel.com, ian.jackson@eu.citrix.com,
Yi Sun <yi.y.sun@linux.intel.com>,
mengxu@cis.upenn.edu, jbeulich@suse.com,
chao.p.peng@linux.intel.com, roger.pau@citrix.com
Subject: [PATCH v10 07/25] x86: refactor psr: L3 CAT: implement get hw info flow.
Date: Sat, 1 Apr 2017 21:53:38 +0800 [thread overview]
Message-ID: <1491054836-30488-8-git-send-email-yi.y.sun@linux.intel.com> (raw)
In-Reply-To: <1491054836-30488-1-git-send-email-yi.y.sun@linux.intel.com>
This patch implements get HW info flow including L3 CAT callback
function.
It also changes sysctl interface to make it more general.
With this patch, 'psr-hwinfo' can work for L3 CAT.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
---
v10:
- remove 'PSR_SOCKET_UNKNOWN' and use 'ASSERT_UNREACHABLE()' to handle
this case.
(suggested by Jan Beulich)
- check 'feat_type'.
(suggested by Jan Beulich)
- adjust macros names and values to make them more appropriate.
(suggested by Jan Beulich)
- use 'feat_init_done'.
(suggested by Jan Beulich)
- changes about 'cbm_len'.
(suggested by Jan Beulich)
v9:
- replace feature list handling to feature array handling.
(suggested by Roger Pau)
- define 'PSR_INFO_SIZE'.
(suggested by Roger Pau)
- fix coding style issue.
(suggested by Roger Pau and Jan Beulich)
- use 'ARRAY_SIZE'.
(suggested by Roger Pau)
- rename 'l3_cat_get_feat_info' to 'cat_get_feat_info' to make it a common
function for both L3/L2 CAT.
(suggested by Roger Pau)
- move constant to the right of comparison.
(suggested by Wei Liu)
- remove wrong comment.
(suggested by Jan Beulich)
- rename macros used by psr_get_info to make them meaningful.
(suggested by Jan Beulich)
- remove assignment for 'PSR_SOCKET_UNKNOWN'.
(suggested by Jan Beulich)
- retain blank line after 'case XEN_SYSCTL_PSR_CAT_get_l3_info'.
(suggested by Jan Beulich)
- modify patch title to indicate 'L3 CAT'.
(suggested by Jan Beulich)
- move common data check into common function.
(suggested by Jan Beulich)
v6:
- fix coding style issue.
(suggested by Konrad Rzeszutek Wilk)
- define 'PSR_SOCKET_UNKNOWN' in 'psr_feat_type'.
(suggested by Konrad Rzeszutek Wilk)
- change '-ENOTSOCK' to 'ERANGE'.
(suggested by Konrad Rzeszutek Wilk)
- modify position of macros to remove odd spacing in psr.h.
(suggested by Konrad Rzeszutek Wilk)
v5:
- change 'dat[]' to 'data[]'.
(suggested by Jan Beulich)
- modify parameter type to avoid fixed width type when there is no such
intention.
(suggested by Jan Beulich)
- use 'const' when it is possible.
(suggested by Jan Beulich)
- check feature type outside callback function.
(suggested by Jan Beulich)
- modify macros names to add prefix 'PSR_' and change 'CDP_FLAG' to
'PSR_FLAG'.
(suggested by Jan Beulich)
v4:
- create this patch to make codes easier to understand.
(suggested by Jan Beulich)
---
xen/arch/x86/psr.c | 75 +++++++++++++++++++++++++++++++++++++++++++++--
xen/arch/x86/sysctl.c | 19 +++++++++---
xen/include/asm-x86/psr.h | 16 ++++++----
3 files changed, 98 insertions(+), 12 deletions(-)
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 3421219..36ade48 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -93,6 +93,10 @@ struct feat_node {
unsigned int cos_num;
unsigned int cos_max;
unsigned int cbm_len;
+
+ /* get_feat_info is used to get feature HW info. */
+ bool (*get_feat_info)(const struct feat_node *feat,
+ uint32_t data[], unsigned int array_len);
} *props;
uint32_t cos_reg_val[MAX_COS_REG_CNT];
@@ -183,6 +187,22 @@ static bool feat_init_done(const struct psr_socket_info *info)
return false;
}
+static enum psr_feat_type psr_cbm_type_to_feat_type(enum cbm_type type)
+{
+ enum psr_feat_type feat_type;
+
+ switch ( type )
+ {
+ case PSR_CBM_TYPE_L3:
+ feat_type = PSR_SOCKET_L3_CAT;
+ break;
+ default:
+ ASSERT_UNREACHABLE();
+ }
+
+ return feat_type;
+}
+
/* CAT common functions implementation. */
static void cat_init_feature(const struct cpuid_leaf *regs,
struct feat_node *feat,
@@ -232,9 +252,23 @@ static void cat_init_feature(const struct cpuid_leaf *regs,
socket, feat->props->cos_max, feat->props->cbm_len);
}
+static bool cat_get_feat_info(const struct feat_node *feat,
+ uint32_t data[], unsigned int array_len)
+{
+ if ( array_len != PSR_INFO_ARRAY_SIZE )
+ return false;
+
+ data[PSR_INFO_IDX_COS_MAX] = feat->props->cos_max;
+ data[PSR_INFO_IDX_CAT_CBM_LEN] = feat->props->cbm_len;
+ data[PSR_INFO_IDX_CAT_FLAG] = 0;
+
+ return true;
+}
+
/* L3 CAT ops */
static struct feat_props l3_cat_props = {
.cos_num = 1,
+ .get_feat_info = cat_get_feat_info,
};
static void __init parse_psr_bool(char *s, char *value, char *feature,
@@ -446,10 +480,45 @@ void psr_ctxt_switch_to(struct domain *d)
}
}
-int psr_get_cat_l3_info(unsigned int socket, uint32_t *cbm_len,
- uint32_t *cos_max, uint32_t *flags)
+static struct psr_socket_info *get_socket_info(unsigned int socket)
{
- return 0;
+ if ( !socket_info )
+ return ERR_PTR(-ENODEV);
+
+ if ( socket >= nr_sockets )
+ return ERR_PTR(-ERANGE);
+
+ if ( !feat_init_done(socket_info + socket) )
+ return ERR_PTR(-ENOENT);
+
+ return socket_info + socket;
+}
+
+int psr_get_info(unsigned int socket, enum cbm_type type,
+ uint32_t data[], unsigned int array_len)
+{
+ const struct psr_socket_info *info = get_socket_info(socket);
+ const struct feat_node *feat;
+ enum psr_feat_type feat_type;
+
+ if ( IS_ERR(info) )
+ return PTR_ERR(info);
+
+ if ( !data )
+ return -EINVAL;
+
+ feat_type = psr_cbm_type_to_feat_type(type);
+ if ( feat_type > ARRAY_SIZE(info->features) )
+ return -ENOENT;
+
+ feat = info->features[feat_type];
+ if ( !feat )
+ return -ENOENT;
+
+ if ( feat->props->get_feat_info(feat, data, array_len) )
+ return 0;
+
+ return -EINVAL;
}
int psr_get_l3_cbm(struct domain *d, unsigned int socket,
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 2f7056e..c23270d 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -175,14 +175,25 @@ long arch_do_sysctl(
switch ( sysctl->u.psr_cat_op.cmd )
{
case XEN_SYSCTL_PSR_CAT_get_l3_info:
- ret = psr_get_cat_l3_info(sysctl->u.psr_cat_op.target,
- &sysctl->u.psr_cat_op.u.l3_info.cbm_len,
- &sysctl->u.psr_cat_op.u.l3_info.cos_max,
- &sysctl->u.psr_cat_op.u.l3_info.flags);
+ {
+ uint32_t data[PSR_INFO_ARRAY_SIZE];
+
+ ret = psr_get_info(sysctl->u.psr_cat_op.target,
+ PSR_CBM_TYPE_L3, data, ARRAY_SIZE(data));
+ if ( ret )
+ break;
+
+ sysctl->u.psr_cat_op.u.l3_info.cos_max =
+ data[PSR_INFO_IDX_COS_MAX];
+ sysctl->u.psr_cat_op.u.l3_info.cbm_len =
+ data[PSR_INFO_IDX_CAT_CBM_LEN];
+ sysctl->u.psr_cat_op.u.l3_info.flags =
+ data[PSR_INFO_IDX_CAT_FLAG];
if ( !ret && __copy_field_to_guest(u_sysctl, sysctl, u.psr_cat_op) )
ret = -EFAULT;
break;
+ }
default:
ret = -EOPNOTSUPP;
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index 57f47e9..af3a465 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -19,20 +19,26 @@
#include <xen/types.h>
/* CAT cpuid level */
-#define PSR_CPUID_LEVEL_CAT 0x10
+#define PSR_CPUID_LEVEL_CAT 0x10
/* Resource Type Enumeration */
#define PSR_RESOURCE_TYPE_L3 0x2
/* L3 Monitoring Features */
-#define PSR_CMT_L3_OCCUPANCY 0x1
+#define PSR_CMT_L3_OCCUPANCY 0x1
/* CDP Capability */
-#define PSR_CAT_CDP_CAPABILITY (1u << 2)
+#define PSR_CAT_CDP_CAPABILITY (1u << 2)
/* L3 CDP Enable bit*/
#define PSR_L3_QOS_CDP_ENABLE_BIT 0x0
+/* Used by psr_get_info() */
+#define PSR_INFO_IDX_COS_MAX 0
+#define PSR_INFO_IDX_CAT_CBM_LEN 1
+#define PSR_INFO_IDX_CAT_FLAG 2
+#define PSR_INFO_ARRAY_SIZE 3
+
struct psr_cmt_l3 {
unsigned int features;
unsigned int upscaling_factor;
@@ -63,8 +69,8 @@ int psr_alloc_rmid(struct domain *d);
void psr_free_rmid(struct domain *d);
void psr_ctxt_switch_to(struct domain *d);
-int psr_get_cat_l3_info(unsigned int socket, uint32_t *cbm_len,
- uint32_t *cos_max, uint32_t *flags);
+int psr_get_info(unsigned int socket, enum cbm_type type,
+ uint32_t data[], unsigned int array_len);
int psr_get_l3_cbm(struct domain *d, unsigned int socket,
uint64_t *cbm, enum cbm_type type);
int psr_set_l3_cbm(struct domain *d, unsigned int socket,
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-04-01 13:53 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-01 13:53 [PATCH v10 00/25] Enable L2 Cache Allocation Technology & Refactor psr.c Yi Sun
2017-04-01 13:53 ` [PATCH v10 01/25] docs: create Cache Allocation Technology (CAT) and Code and Data Prioritization (CDP) feature document Yi Sun
2017-04-01 13:53 ` [PATCH v10 02/25] x86: refactor psr: remove L3 CAT/CDP codes Yi Sun
2017-04-01 13:53 ` [PATCH v10 03/25] x86: refactor psr: implement main data structures Yi Sun
2017-04-03 15:50 ` Jan Beulich
2017-04-05 3:12 ` Yi Sun
2017-04-05 8:20 ` Jan Beulich
2017-04-05 8:45 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 04/25] x86: move cpuid_count_leaf from cpuid.c to processor.h Yi Sun
2017-04-01 13:53 ` [PATCH v10 05/25] x86: refactor psr: L3 CAT: implement CPU init and free flow Yi Sun
2017-04-05 15:10 ` Jan Beulich
2017-04-06 5:49 ` Yi Sun
2017-04-06 8:32 ` Jan Beulich
2017-04-06 9:22 ` Yi Sun
2017-04-06 9:34 ` Jan Beulich
2017-04-06 10:02 ` Yi Sun
2017-04-06 14:02 ` Jan Beulich
2017-04-07 5:17 ` Yi Sun
2017-04-07 8:48 ` Jan Beulich
2017-04-07 9:08 ` Yi Sun
2017-04-07 9:46 ` Jan Beulich
2017-04-10 3:27 ` Yi Sun
2017-04-10 12:43 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 06/25] x86: refactor psr: L3 CAT: implement Domain init/free and schedule flows Yi Sun
2017-04-05 15:23 ` Jan Beulich
2017-04-06 6:01 ` Yi Sun
2017-04-06 8:34 ` Jan Beulich
2017-04-01 13:53 ` Yi Sun [this message]
2017-04-05 15:37 ` [PATCH v10 07/25] x86: refactor psr: L3 CAT: implement get hw info flow Jan Beulich
2017-04-06 6:05 ` Yi Sun
2017-04-06 8:36 ` Jan Beulich
2017-04-06 11:16 ` Yi Sun
2017-04-06 14:04 ` Jan Beulich
2017-04-07 5:39 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 08/25] x86: refactor psr: L3 CAT: implement get value flow Yi Sun
2017-04-05 15:51 ` Jan Beulich
2017-04-06 6:10 ` Yi Sun
2017-04-06 8:40 ` Jan Beulich
2017-04-06 11:13 ` Yi Sun
2017-04-06 14:08 ` Jan Beulich
2017-04-07 5:40 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 09/25] x86: refactor psr: L3 CAT: set value: implement framework Yi Sun
2017-04-11 15:01 ` Jan Beulich
2017-04-12 5:53 ` Yi Sun
2017-04-12 9:09 ` Jan Beulich
2017-04-12 12:23 ` Yi Sun
2017-04-12 12:42 ` Jan Beulich
2017-04-13 8:11 ` Yi Sun
2017-04-13 9:41 ` Jan Beulich
2017-04-13 10:49 ` Yi Sun
2017-04-13 10:58 ` Jan Beulich
2017-04-13 11:11 ` Yi Sun
2017-04-13 11:26 ` Yi Sun
2017-04-13 11:31 ` Jan Beulich
2017-04-13 11:44 ` Yi Sun
2017-04-13 11:50 ` Jan Beulich
2017-04-18 10:55 ` Yi Sun
2017-04-18 11:46 ` Jan Beulich
2017-04-19 8:22 ` Yi Sun
2017-04-19 9:00 ` Jan Beulich
2017-04-20 2:14 ` Yi Sun
2017-04-20 9:43 ` Jan Beulich
2017-04-20 13:02 ` Lars Kurth
2017-04-20 13:21 ` Jan Beulich
2017-04-20 16:52 ` Lars Kurth
2017-04-21 6:11 ` Jan Beulich
2017-04-21 1:13 ` Konrad Rzeszutek Wilk
2017-04-21 6:18 ` Jan Beulich
2017-04-24 6:40 ` Yi Sun
2017-04-24 6:55 ` Jan Beulich
2017-04-25 7:15 ` Yi Sun
2017-04-25 8:24 ` Jan Beulich
2017-04-25 8:40 ` Yi Sun
2017-04-20 5:38 ` [PATCH] dom_ids array implementation Yi Sun
2017-04-26 10:04 ` Jan Beulich
2017-04-27 2:38 ` Yi Sun
2017-04-27 6:48 ` Jan Beulich
2017-04-27 9:30 ` Yi Sun
2017-04-27 9:39 ` Jan Beulich
2017-04-27 12:03 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 10/25] x86: refactor psr: L3 CAT: set value: assemble features value array Yi Sun
2017-04-11 15:11 ` Jan Beulich
2017-04-12 5:55 ` Yi Sun
2017-04-12 9:13 ` Jan Beulich
2017-04-12 12:26 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 11/25] x86: refactor psr: L3 CAT: set value: implement cos finding flow Yi Sun
2017-04-11 15:17 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 12/25] x86: refactor psr: L3 CAT: set value: implement cos id picking flow Yi Sun
2017-04-11 15:20 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 13/25] x86: refactor psr: L3 CAT: set value: implement write msr flow Yi Sun
2017-04-11 15:25 ` Jan Beulich
2017-04-12 6:04 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 14/25] x86: refactor psr: CDP: implement CPU init and free flow Yi Sun
2017-04-01 13:53 ` [PATCH v10 15/25] x86: refactor psr: CDP: implement get hw info flow Yi Sun
2017-04-01 13:53 ` [PATCH v10 16/25] x86: refactor psr: CDP: implement get value flow Yi Sun
2017-04-11 15:39 ` Jan Beulich
2017-04-12 6:05 ` Yi Sun
2017-04-12 9:14 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 17/25] x86: refactor psr: CDP: implement set value callback functions Yi Sun
2017-04-11 16:03 ` Jan Beulich
2017-04-12 6:14 ` Yi Sun
2017-04-01 13:53 ` [PATCH v10 18/25] x86: L2 CAT: implement CPU init and free flow Yi Sun
2017-04-12 15:18 ` Jan Beulich
2017-04-13 8:12 ` Yi Sun
2017-04-13 8:16 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 19/25] x86: L2 CAT: implement get hw info flow Yi Sun
2017-04-01 13:53 ` [PATCH v10 20/25] x86: L2 CAT: implement get value flow Yi Sun
2017-04-01 13:53 ` [PATCH v10 21/25] x86: L2 CAT: implement set " Yi Sun
2017-04-12 15:23 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 22/25] tools: L2 CAT: support get HW info for L2 CAT Yi Sun
2017-04-12 15:24 ` Jan Beulich
2017-04-01 13:53 ` [PATCH v10 23/25] tools: L2 CAT: support show cbm " Yi Sun
2017-04-01 13:53 ` [PATCH v10 24/25] tools: L2 CAT: support set " Yi Sun
2017-04-01 13:53 ` [PATCH v10 25/25] docs: add L2 CAT description in docs Yi Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491054836-30488-8-git-send-email-yi.y.sun@linux.intel.com \
--to=yi.y.sun@linux.intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=chao.p.peng@linux.intel.com \
--cc=dario.faggioli@citrix.com \
--cc=he.chen@linux.intel.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=kevin.tian@intel.com \
--cc=mengxu@cis.upenn.edu \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).