From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
Jan Beulich <JBeulich@suse.com>
Subject: [PATCH 4/7] x86/traps: Rename compat_hypercall() to entry_int82()
Date: Tue, 2 May 2017 19:05:23 +0100 [thread overview]
Message-ID: <1493748326-9582-5-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1493748326-9582-1-git-send-email-andrew.cooper3@citrix.com>
This follows the Linux example of naming the entry point by how it is arrived
at, rather than its purpose.
Doing so highlights that the SAVE_VOLATILE instantiation sets up the wrong
entry_vector on the stack (although this is benign as we never sysret to a
32bit PV guest, and the iret path doesn't care).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Jan Beulich <JBeulich@suse.com>
---
xen/arch/x86/traps.c | 2 +-
xen/arch/x86/x86_64/compat/entry.S | 4 ++--
xen/include/asm-x86/processor.h | 3 ++-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index 1c90177..3ab70e5 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -3872,7 +3872,7 @@ void __init trap_init(void)
/* The 32-on-64 hypercall vector is only accessible from ring 1. */
_set_gate(idt_table + HYPERCALL_VECTOR,
- SYS_DESC_trap_gate, 1, &compat_hypercall);
+ SYS_DESC_trap_gate, 1, &entry_int82);
/* Fast trap for int80 (faster than taking the #GP-fixup path). */
_set_gate(idt_table + 0x80, SYS_DESC_trap_gate, 3, &int80_direct_trap);
diff --git a/xen/arch/x86/x86_64/compat/entry.S b/xen/arch/x86/x86_64/compat/entry.S
index fb72464..abf1094 100644
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -11,10 +11,10 @@
#include <public/xen.h>
#include <irq_vectors.h>
-ENTRY(compat_hypercall)
+ENTRY(entry_int82)
ASM_CLAC
pushq $0
- SAVE_VOLATILE type=TRAP_syscall compat=1
+ SAVE_VOLATILE type=HYPERCALL_VECTOR compat=1
CR4_PV32_RESTORE
cmpb $0,untrusted_msi(%rip)
diff --git a/xen/include/asm-x86/processor.h b/xen/include/asm-x86/processor.h
index f244e10..1d1a4ff 100644
--- a/xen/include/asm-x86/processor.h
+++ b/xen/include/asm-x86/processor.h
@@ -529,6 +529,8 @@ DECLARE_TRAP_HANDLER(simd_coprocessor_error);
DECLARE_TRAP_HANDLER_CONST(machine_check);
DECLARE_TRAP_HANDLER(alignment_check);
+DECLARE_TRAP_HANDLER(entry_int82);
+
#undef DECLARE_TRAP_HANDLER_CONST
#undef DECLARE_TRAP_HANDLER
@@ -538,7 +540,6 @@ void do_reserved_trap(struct cpu_user_regs *regs);
void sysenter_entry(void);
void sysenter_eflags_saved(void);
-void compat_hypercall(void);
void int80_direct_trap(void);
#define STUBS_PER_PAGE (PAGE_SIZE / STUB_BUF_SIZE)
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-05-02 18:05 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-02 18:05 [PATCH 0/7] XSAs 213-315 followups Andrew Cooper
2017-05-02 18:05 ` [PATCH 1/7] x86/traps: Drop 32bit fields out of tss_struct Andrew Cooper
2017-05-03 8:10 ` Jan Beulich
2017-05-03 12:33 ` Andrew Cooper
2017-05-03 9:48 ` Wei Liu
2017-05-02 18:05 ` [PATCH 2/7] x86/traps: Poison unused stack pointers in the TSS Andrew Cooper
2017-05-03 8:14 ` Jan Beulich
2017-05-03 12:47 ` Andrew Cooper
2017-05-03 13:29 ` [PATCH v2 " Andrew Cooper
2017-05-03 13:45 ` Jan Beulich
2017-05-02 18:05 ` [PATCH 3/7] x86/mm: Further restrict permissions on some virtual mappings Andrew Cooper
2017-05-03 8:49 ` Jan Beulich
2017-05-03 13:38 ` Andrew Cooper
2017-05-03 13:48 ` Jan Beulich
2017-05-03 9:48 ` Wei Liu
2017-05-03 10:11 ` Tim Deegan
2017-05-03 11:13 ` George Dunlap
2017-05-02 18:05 ` Andrew Cooper [this message]
2017-05-03 8:55 ` [PATCH 4/7] x86/traps: Rename compat_hypercall() to entry_int82() Jan Beulich
2017-05-03 13:41 ` Andrew Cooper
2017-05-02 18:05 ` [PATCH 5/7] x86/traps: Lift all non-entrypoint logic in entry_int82() up into C Andrew Cooper
2017-05-03 9:02 ` Jan Beulich
2017-05-03 11:26 ` Wei Liu
2017-05-03 11:38 ` Andrew Cooper
2017-05-03 11:43 ` Wei Liu
2017-05-03 12:02 ` Jan Beulich
2017-05-03 12:18 ` Andrew Cooper
2017-05-03 12:37 ` Jan Beulich
2017-05-03 18:29 ` Andrew Cooper
2017-05-04 7:27 ` Jan Beulich
2017-05-04 9:27 ` Andrew Cooper
2017-05-04 9:36 ` Jan Beulich
2017-05-04 9:57 ` Andrew Cooper
2017-05-03 12:00 ` Jan Beulich
2017-05-04 10:01 ` [PATCH v2 " Andrew Cooper
2017-05-04 10:16 ` Andrew Cooper
2017-05-04 10:28 ` Jan Beulich
2017-05-04 11:09 ` Andrew Cooper
2017-05-04 10:22 ` Jan Beulich
2017-05-02 18:05 ` [PATCH 6/7] x86/asm: Fold LOAD_C_CLOBBERED into RESTORE_ALL Andrew Cooper
2017-05-03 9:08 ` Jan Beulich
2017-05-03 9:48 ` Wei Liu
2017-05-02 18:05 ` [PATCH 7/7] x86/asm: Clobber %r{8..15} on exit to 32bit PV guests Andrew Cooper
2017-05-03 9:13 ` Jan Beulich
2017-05-03 17:51 ` [PATCH v2 " Andrew Cooper
2017-05-04 8:50 ` Jan Beulich
2017-05-04 11:11 ` [RFC for 4.9] [PATCH 0/7] XSAs 213-315 followups Andrew Cooper
2017-05-04 12:52 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493748326-9582-5-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=JBeulich@suse.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).