From: Sameer Goel <sgoel@codeaurora.org>
To: xen-devel@lists.xenproject.org, Julien Grall <julien.grall@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>,
Tomasz Nowicki <tn@semihalf.com>,
Punit Agrawal <punit.agrawal@arm.com>,
Sameer Goel <sgoel@codeaurora.org>,
Robin Murphy <robin.murphy@arm.com>,
Shanker Donthineni <shankerd@codeaurora.org>
Subject: [RFC 0/6] IORT support and introduce fwspec
Date: Thu, 8 Jun 2017 13:30:41 -0600 [thread overview]
Message-ID: <1496950247-8755-1-git-send-email-sgoel@codeaurora.org> (raw)
This changelist is in preparation for porting the latest SMMUv3 driver from
Linux kernel 4.11 release.
Scope of the changes:
- Introduce the iommu_fwspec implementation
* This implementation is a direct port from Linux. The code that is not
needed for Xen is removed.
- IORT port from Linux. The differences are as under:
* The DMA ops are removed.
* Modified the code for creating the SMMU devices. This also initializes
the discoverd SMMU devices.
* MSI code is commented out till the MSI framework API usage is clearer.
* IORT node data parsing is delegated to the driver. Looking for comments
on enabling the code in IORT driver. This will need a standard resource
object. (Direct port from Linux or a new define for Xen?)
* Assumptions on PCI IORT SMMU interaction. PCI assign device will call
iort_iommu_configure to setup the streamids.Then it will call SMMU
assign device with the right struct device argument.
Sameer Goel (6):
passthrough/arm: Modify SMMU driver to use generic device definition
arm64: Add definitions for fwnode_handle
Introduce _xrealloc
xen/passthrough/arm: Introduce iommu_fwspec
ACPI: arm: Support for IORT
acpi:arm64: Add support for parsing IORT table
xen/arch/arm/setup.c | 3 +
xen/common/xmalloc_tlsf.c | 13 +
xen/drivers/acpi/Makefile | 1 +
xen/drivers/acpi/arm/Makefile | 1 +
xen/drivers/acpi/arm/iort.c | 977 ++++++++++++++++++++++++++++++++++++
xen/drivers/passthrough/arm/iommu.c | 58 +++
xen/drivers/passthrough/arm/smmu.c | 12 +-
xen/include/acpi/acpi.h | 1 +
xen/include/acpi/acpi_iort.h | 65 +++
xen/include/asm-arm/device.h | 5 +
xen/include/xen/acpi.h | 21 +
xen/include/xen/fwnode.h | 35 ++
xen/include/xen/iommu.h | 28 ++
xen/include/xen/lib.h | 7 +-
xen/include/xen/pci.h | 1 +
xen/include/xen/xmalloc.h | 1 +
16 files changed, 1222 insertions(+), 7 deletions(-)
create mode 100644 xen/drivers/acpi/arm/Makefile
create mode 100644 xen/drivers/acpi/arm/iort.c
create mode 100644 xen/include/acpi/acpi_iort.h
create mode 100644 xen/include/xen/fwnode.h
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next reply other threads:[~2017-06-08 19:31 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 19:30 Sameer Goel [this message]
2017-06-08 19:30 ` [RFC 1/6] passthrough/arm: Modify SMMU driver to use generic device definition Sameer Goel
2017-06-12 12:34 ` Julien Grall
2017-06-08 19:30 ` [RFC 2/6] arm64: Add definitions for fwnode_handle Sameer Goel
2017-06-08 19:47 ` Julien Grall
2017-06-08 19:59 ` Julien Grall
2017-06-08 21:42 ` Goel, Sameer
2017-06-08 21:57 ` Stefano Stabellini
2017-06-12 12:40 ` Julien Grall
2017-08-28 21:42 ` Goel, Sameer
2017-06-12 12:51 ` Julien Grall
2017-08-28 21:41 ` Goel, Sameer
2017-06-08 19:30 ` [RFC 3/6] Introduce _xrealloc Sameer Goel
2017-06-08 19:49 ` Julien Grall
2017-06-09 9:44 ` Wei Liu
2017-08-28 21:39 ` Goel, Sameer
2017-10-12 13:33 ` Julien Grall
2017-10-12 14:45 ` Wei Liu
2017-06-08 21:51 ` Stefano Stabellini
2017-06-08 19:30 ` [RFC 4/6] xen/passthrough/arm: Introduce iommu_fwspec Sameer Goel
2017-06-08 20:02 ` Julien Grall
2017-06-08 19:30 ` [RFC 5/6] ACPI: arm: Support for IORT Sameer Goel
2017-07-14 15:36 ` Jan Beulich
2017-06-08 19:30 ` [RFC 6/6] acpi:arm64: Add support for parsing IORT table Sameer Goel
2017-06-08 22:22 ` Stefano Stabellini
2017-06-09 11:15 ` Robin Murphy
2017-06-12 13:36 ` Julien Grall
2017-06-12 13:44 ` Jan Beulich
2017-06-21 16:55 ` Robin Murphy
2017-08-28 21:48 ` Goel, Sameer
2017-06-12 13:24 ` Julien Grall
2017-08-28 22:21 ` Goel, Sameer
2017-09-12 11:25 ` Julien Grall
2017-09-21 0:37 ` Goel, Sameer
2017-09-21 10:54 ` Julien Grall
2017-07-14 15:41 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496950247-8755-1-git-send-email-sgoel@codeaurora.org \
--to=sgoel@codeaurora.org \
--cc=julien.grall@arm.com \
--cc=punit.agrawal@arm.com \
--cc=robin.murphy@arm.com \
--cc=shankerd@codeaurora.org \
--cc=sstabellini@kernel.org \
--cc=tn@semihalf.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).