[PATCH 2/2] xen:arm: earlyprintk configuration for R-Car Gen3 boards

[Andrii Anisov <andrii.anisov@gmail.com>]

From: Andrii Anisov <andrii_anisov@epam.com>

Introduce an earlyprintk configuration for R-Car Gen3 SoC based development
boards, like:
 - Salvator-X [http://elinux.org/R-Car/Boards/Salvator-X]
 - M3ULCB [http://elinux.org/R-Car/Boards/M3SK]
 - H3ULCB [http://elinux.org/R-Car/Boards/H3SK]

Signed-off-by: Iurii Konovalenko <iurii.konovalenko@globallogic.com>
Signed-off-by: Iurii Mykhalskyi <iurii.mykhalskyi@globallogic.com>
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
---
 docs/misc/arm/early-printk.txt | 1 +
 xen/arch/arm/Rules.mk          | 1 +
 2 files changed, 2 insertions(+)

diff --git a/docs/misc/arm/early-printk.txt b/docs/misc/arm/early-printk.txt
index 41b528b..a7a3d94 100644
--- a/docs/misc/arm/early-printk.txt
+++ b/docs/misc/arm/early-printk.txt
@@ -39,6 +39,7 @@ the name of the machine:
   - fastmodel: printk on ARM Fastmodel software emulators
   - juno: printk with pl011 on Juno platform
   - lager: printk with SCIF0 on Renesas R-Car H2 processors
+  - rcar3: printk with SCIF2 on Renesas R-Car H3 processors
   - midway: printk with the pl011 on Calxeda Midway processors
   - omap5432: printk with UART3 on TI OMAP5432 processors
   - seattle: printk with pl011 for AMD Seattle processor
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index 569a0ba..9c1cb74 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -34,6 +34,7 @@ EARLY_PRINTK_fastmodel      := pl011,0x1c090000,115200
 EARLY_PRINTK_exynos5250     := exynos4210,0x12c20000
 EARLY_PRINTK_juno           := pl011,0x7ff80000
 EARLY_PRINTK_lager          := scif,0xe6e60000
+EARLY_PRINTK_rcar3          := scif,0xe6e88000
 EARLY_PRINTK_midway         := pl011,0xfff36000
 EARLY_PRINTK_omap5432       := 8250,0x48020000,2
 EARLY_PRINTK_seattle        := pl011,0xe1010000
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel