xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Igor Druzhinin <igor.druzhinin@citrix.com>
To: xen-devel@lists.xen.org
Cc: Igor Druzhinin <igor.druzhinin@citrix.com>,
	ian.jackson@eu.citrix.com, wei.liu2@citrix.com,
	jbeulich@suse.com, andrew.cooper3@citrix.com
Subject: [PATCH] hvmloader, libxl: use the correct ACPI settings depending on device model
Date: Wed, 19 Jul 2017 22:19:35 +0100	[thread overview]
Message-ID: <1500499175-20541-1-git-send-email-igor.druzhinin@citrix.com> (raw)

We need to choose ACPI tables and ACPI IO port location
properly depending on the device model version we are running.
Previously, this decision was made by BIOS type specific
code in hvmloader, e.g. always load QEMU traditional specific
tables if it's ROMBIOS and always load QEMU Xen specific
tables if it's SeaBIOS.

This change saves this behavior but adds an additional way
(xenstore key) to specify the correct device model if we
happen to run a non-default one. Toolstack bit makes use of it.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
---
 tools/firmware/hvmloader/hvmloader.c |  2 --
 tools/firmware/hvmloader/ovmf.c      |  2 ++
 tools/firmware/hvmloader/rombios.c   |  2 ++
 tools/firmware/hvmloader/seabios.c   |  3 +++
 tools/firmware/hvmloader/util.c      | 24 ++++++++++++++++++++++++
 tools/libxl/libxl_create.c           |  2 ++
 6 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/tools/firmware/hvmloader/hvmloader.c b/tools/firmware/hvmloader/hvmloader.c
index f603f68..db11ab1 100644
--- a/tools/firmware/hvmloader/hvmloader.c
+++ b/tools/firmware/hvmloader/hvmloader.c
@@ -405,8 +405,6 @@ int main(void)
         }
 
         acpi_enable_sci();
-
-        hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1);
     }
 
     init_vm86_tss();
diff --git a/tools/firmware/hvmloader/ovmf.c b/tools/firmware/hvmloader/ovmf.c
index 4ff7f1d..ebadc64 100644
--- a/tools/firmware/hvmloader/ovmf.c
+++ b/tools/firmware/hvmloader/ovmf.c
@@ -127,6 +127,8 @@ static void ovmf_acpi_build_tables(void)
         .dsdt_15cpu_len = 0
     };
 
+    hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1);
+
     hvmloader_acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS);
 }
 
diff --git a/tools/firmware/hvmloader/rombios.c b/tools/firmware/hvmloader/rombios.c
index 56b39b7..31a7c65 100644
--- a/tools/firmware/hvmloader/rombios.c
+++ b/tools/firmware/hvmloader/rombios.c
@@ -181,6 +181,8 @@ static void rombios_acpi_build_tables(void)
         .dsdt_15cpu_len = dsdt_15cpu_len,
     };
 
+    hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 0);
+
     hvmloader_acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS);
 }
 
diff --git a/tools/firmware/hvmloader/seabios.c b/tools/firmware/hvmloader/seabios.c
index 870576a..5878eff 100644
--- a/tools/firmware/hvmloader/seabios.c
+++ b/tools/firmware/hvmloader/seabios.c
@@ -28,6 +28,7 @@
 
 #include <acpi2_0.h>
 #include <libacpi.h>
+#include <xen/hvm/params.h>
 
 extern unsigned char dsdt_anycpu_qemu_xen[];
 extern int dsdt_anycpu_qemu_xen_len;
@@ -99,6 +100,8 @@ static void seabios_acpi_build_tables(void)
         .dsdt_15cpu_len = 0,
     };
 
+    hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1);
+
     hvmloader_acpi_build_tables(&config, rsdp);
     add_table(rsdp);
 }
diff --git a/tools/firmware/hvmloader/util.c b/tools/firmware/hvmloader/util.c
index db5f240..45b777c 100644
--- a/tools/firmware/hvmloader/util.c
+++ b/tools/firmware/hvmloader/util.c
@@ -31,6 +31,9 @@
 #include <xen/hvm/hvm_xs_strings.h>
 #include <xen/hvm/params.h>
 
+extern unsigned char dsdt_anycpu_qemu_xen[], dsdt_anycpu[], dsdt_15cpu[];
+extern int dsdt_anycpu_qemu_xen_len, dsdt_anycpu_len, dsdt_15cpu_len;
+
 /*
  * Check whether there exists overlap in the specified memory range.
  * Returns true if exists, else returns false.
@@ -897,6 +900,27 @@ void hvmloader_acpi_build_tables(struct acpi_config *config,
     /* Allocate and initialise the acpi info area. */
     mem_hole_populate_ram(ACPI_INFO_PHYSICAL_ADDRESS >> PAGE_SHIFT, 1);
 
+    /* If the device model is specified switch to the corresponding tables */
+    s = xenstore_read("platform/device-model", "");
+    if ( !strncmp(s, "qemu_xen_traditional", 21) )
+    {
+        config->dsdt_anycpu = dsdt_anycpu;
+        config->dsdt_anycpu_len = dsdt_anycpu_len;
+        config->dsdt_15cpu = dsdt_15cpu;
+        config->dsdt_15cpu_len = dsdt_15cpu_len;
+
+        hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 0);
+    }
+    else if ( !strncmp(s, "qemu_xen", 10) )
+    {
+        config->dsdt_anycpu = dsdt_anycpu_qemu_xen;
+        config->dsdt_anycpu_len = dsdt_anycpu_qemu_xen_len;
+        config->dsdt_15cpu = NULL;
+        config->dsdt_15cpu_len = 0;
+
+        hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1);
+    }
+
     config->lapic_base_address = LAPIC_BASE_ADDRESS;
     config->lapic_id = acpi_lapic_id;
     config->ioapic_base_address = ioapic_base_address;
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 1158303..8dc8186 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -472,6 +472,8 @@ int libxl__domain_build(libxl__gc *gc,
                                    info->u.hvm.mmio_hole_memkb << 10);
             }
         }
+        localents[i++] = "platform/device-model";
+        localents[i++] = (char *) libxl_device_model_version_to_string(info->device_model_version);
 
         break;
     case LIBXL_DOMAIN_TYPE_PV:
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

             reply	other threads:[~2017-07-19 21:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-19 21:19 Igor Druzhinin [this message]
2017-07-20 10:46 ` [PATCH] hvmloader, libxl: use the correct ACPI settings depending on device model Paul Durrant
2017-07-25 14:33 ` Wei Liu
2017-07-25 14:53   ` Igor Druzhinin
2017-07-25 14:56     ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500499175-20541-1-git-send-email-igor.druzhinin@citrix.com \
    --to=igor.druzhinin@citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).