From: Stefano Stabellini <sstabellini@kernel.org>
To: xen-devel@lists.xen.org
Cc: jgross@suse.com, Stefano Stabellini <stefano@aporeto.com>,
boris.ostrovsky@oracle.com, sstabellini@kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 03/13] xen/pvcalls: implement socket command and handle events
Date: Fri, 21 Jul 2017 17:11:53 -0700 [thread overview]
Message-ID: <1500682323-25940-3-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <1500682323-25940-1-git-send-email-sstabellini@kernel.org>
Send a PVCALLS_SOCKET command to the backend, use the masked
req_prod_pvt as req_id. This way, req_id is guaranteed to be between 0
and PVCALLS_NR_REQ_PER_RING. We already have a slot in the rsp array
ready for the response, and there cannot be two outstanding responses
with the same req_id.
Wait for the response by waiting on the inflight_req waitqueue and
check for the req_id field in rsp[req_id]. Use atomic accesses to
read the field. Once a response is received, clear the corresponding rsp
slot by setting req_id to PVCALLS_INVALID_ID. Note that
PVCALLS_INVALID_ID is invalid only from the frontend point of view. It
is not part of the PVCalls protocol.
pvcalls_front_event_handler is in charge of copying responses from the
ring to the appropriate rsp slot. It is done by copying the body of the
response first, then by copying req_id atomically. After the copies,
wake up anybody waiting on waitqueue.
pvcallss_lock protects accesses to the ring.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
drivers/xen/pvcalls-front.c | 91 +++++++++++++++++++++++++++++++++++++++++++++
drivers/xen/pvcalls-front.h | 8 ++++
2 files changed, 99 insertions(+)
create mode 100644 drivers/xen/pvcalls-front.h
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index fb08ebf..7933c73 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -40,9 +40,100 @@ struct pvcalls_bedata {
static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
{
+ struct xenbus_device *dev = dev_id;
+ struct pvcalls_bedata *bedata;
+ struct xen_pvcalls_response *rsp;
+ uint8_t *src, *dst;
+ int req_id = 0, more = 0;
+
+ if (dev == NULL)
+ return IRQ_HANDLED;
+
+ bedata = dev_get_drvdata(&dev->dev);
+ if (bedata == NULL)
+ return IRQ_HANDLED;
+
+again:
+ while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
+ rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
+
+ req_id = rsp->req_id;
+ src = (uint8_t *)&bedata->rsp[req_id];
+ src += sizeof(rsp->req_id);
+ dst = (uint8_t *)rsp;
+ dst += sizeof(rsp->req_id);
+ memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
+ /*
+ * First copy the rest of the data, then req_id. It is
+ * paired with the barrier when accessing bedata->rsp.
+ */
+ smp_wmb();
+ WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
+
+ bedata->ring.rsp_cons++;
+ wake_up(&bedata->inflight_req);
+ }
+
+ RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
+ if (more)
+ goto again;
return IRQ_HANDLED;
}
+int pvcalls_front_socket(struct socket *sock)
+{
+ struct pvcalls_bedata *bedata;
+ struct xen_pvcalls_request *req;
+ int notify, req_id, ret;
+
+ if (!pvcalls_front_dev)
+ return -EACCES;
+ /*
+ * PVCalls only supports domain AF_INET,
+ * type SOCK_STREAM and protocol 0 sockets for now.
+ *
+ * Check socket type here, AF_INET and protocol checks are done
+ * by the caller.
+ */
+ if (sock->type != SOCK_STREAM)
+ return -ENOTSUPP;
+
+ bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+ spin_lock(&bedata->pvcallss_lock);
+ req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
+ BUG_ON(req_id >= PVCALLS_NR_REQ_PER_RING);
+ if (RING_FULL(&bedata->ring) ||
+ READ_ONCE(bedata->rsp[req_id].req_id) != PVCALLS_INVALID_ID) {
+ spin_unlock(&bedata->pvcallss_lock);
+ return -EAGAIN;
+ }
+ req = RING_GET_REQUEST(&bedata->ring, req_id);
+ req->req_id = req_id;
+ req->cmd = PVCALLS_SOCKET;
+ req->u.socket.id = (uint64_t) sock;
+ req->u.socket.domain = AF_INET;
+ req->u.socket.type = SOCK_STREAM;
+ req->u.socket.protocol = 0;
+
+ bedata->ring.req_prod_pvt++;
+ RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+ spin_unlock(&bedata->pvcallss_lock);
+ if (notify)
+ notify_remote_via_irq(bedata->irq);
+
+ if (wait_event_interruptible(bedata->inflight_req,
+ READ_ONCE(bedata->rsp[req_id].req_id) == req_id) != 0)
+ return -EINTR;
+
+ ret = bedata->rsp[req_id].ret;
+ /* read ret, then set this rsp slot to be reused */
+ smp_mb();
+ WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+
+ return ret;
+}
+
static const struct xenbus_device_id pvcalls_front_ids[] = {
{ "pvcalls" },
{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
new file mode 100644
index 0000000..b7dabed
--- /dev/null
+++ b/drivers/xen/pvcalls-front.h
@@ -0,0 +1,8 @@
+#ifndef __PVCALLS_FRONT_H__
+#define __PVCALLS_FRONT_H__
+
+#include <linux/net.h>
+
+int pvcalls_front_socket(struct socket *sock);
+
+#endif
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-07-22 0:11 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <alpine.DEB.2.10.1707201553090.22381@sstabellini-ThinkPad-X260>
2017-07-22 0:11 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
[not found] ` <1500682323-25940-1-git-send-email-sstabellini@kernel.org>
2017-07-22 0:11 ` [PATCH v1 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-24 19:23 ` Juergen Gross
[not found] ` <a8d4bf5c-e509-c673-8892-fe6a6bc83aad@suse.com>
2017-07-25 20:10 ` Stefano Stabellini
2017-07-22 0:11 ` Stefano Stabellini [this message]
2017-07-24 19:29 ` [PATCH v1 03/13] xen/pvcalls: implement socket command and handle events Juergen Gross
[not found] ` <ca977dd3-e3f6-c2bd-14b4-45262e5bc585@suse.com>
2017-07-25 20:43 ` Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-24 19:40 ` Juergen Gross
[not found] ` <7da9743d-61fd-9f1d-a8c4-ea65b953f878@suse.com>
2017-07-24 22:45 ` Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-24 19:47 ` Juergen Gross
[not found] ` <fbb5c673-203f-c262-186a-dba9785a3074@suse.com>
2017-07-24 22:53 ` Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-24 19:51 ` Juergen Gross
[not found] ` <f66b2a87-2e02-6210-6ce4-a0ca63177887@suse.com>
2017-07-24 22:38 ` Stefano Stabellini
2017-07-22 0:11 ` [PATCH v1 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-22 0:12 ` [PATCH v1 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-22 0:12 ` [PATCH v1 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-22 0:12 ` [PATCH v1 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-22 0:12 ` [PATCH v1 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
2017-07-24 19:06 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Juergen Gross
[not found] ` <1500682323-25940-5-git-send-email-sstabellini@kernel.org>
2017-07-24 19:43 ` [PATCH v1 05/13] xen/pvcalls: implement bind command Juergen Gross
[not found] ` <c6a3d016-9a06-3daf-ac00-41ccbef47a32@suse.com>
2017-07-24 22:51 ` Stefano Stabellini
[not found] ` <1500682323-25940-6-git-send-email-sstabellini@kernel.org>
2017-07-24 19:44 ` [PATCH v1 06/13] xen/pvcalls: implement listen command Juergen Gross
[not found] ` <43f1eb35-ae03-a21c-87a8-9a28bc0a7262@suse.com>
2017-07-24 22:51 ` Stefano Stabellini
[not found] ` <1500682323-25940-9-git-send-email-sstabellini@kernel.org>
2017-07-24 19:56 ` [PATCH v1 09/13] xen/pvcalls: implement recvmsg Juergen Gross
[not found] ` <aaeaa565-19fb-0b2b-8a85-729a0e69d81b@suse.com>
2017-07-24 22:37 ` Stefano Stabellini
[not found] ` <1500682323-25940-10-git-send-email-sstabellini@kernel.org>
2017-07-24 20:08 ` [PATCH v1 10/13] xen/pvcalls: implement poll command Juergen Gross
2017-07-25 20:59 ` Stefano Stabellini
[not found] ` <1500682323-25940-11-git-send-email-sstabellini@kernel.org>
2017-07-24 20:14 ` [PATCH v1 11/13] xen/pvcalls: implement release command Juergen Gross
[not found] ` <2a019876-416b-785d-02ee-244d15240a34@suse.com>
2017-07-25 21:07 ` Stefano Stabellini
[not found] ` <1500682323-25940-12-git-send-email-sstabellini@kernel.org>
2017-07-24 20:16 ` [PATCH v1 12/13] xen/pvcalls: implement frontend disconnect Juergen Gross
[not found] ` <1500682323-25940-13-git-send-email-sstabellini@kernel.org>
2017-07-24 20:17 ` [PATCH v1 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Juergen Gross
[not found] ` <06a28b65-19ff-6c92-500c-0b20d8ee5c19@suse.com>
2017-07-24 22:36 ` Stefano Stabellini
[not found] ` <7905bebe-39a0-380f-139d-66ee48c7e853@suse.com>
2017-07-24 22:32 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500682323-25940-3-git-send-email-sstabellini@kernel.org \
--to=sstabellini@kernel.org \
--cc=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stefano@aporeto.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).