[PATCH v4 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend

[PATCH v4 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend

[Stefano Stabellini]

Introduce a xenbus frontend for the pvcalls protocol, as defined by
https://xenbits.xen.org/docs/unstable/misc/pvcalls.html.

This patch only adds the stubs, the code will be added by the following
patches.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 drivers/xen/pvcalls-front.c

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
new file mode 100644
index 0000000..a8d38c2
--- /dev/null
+++ b/drivers/xen/pvcalls-front.c
@@ -0,0 +1,61 @@
+/*
+ * (c) 2017 Stefano Stabellini <stefano@aporeto.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+
+#include <xen/events.h>
+#include <xen/grant_table.h>
+#include <xen/xen.h>
+#include <xen/xenbus.h>
+#include <xen/interface/io/pvcalls.h>
+
+static const struct xenbus_device_id pvcalls_front_ids[] = {
+	{ "pvcalls" },
+	{ "" }
+};
+
+static int pvcalls_front_remove(struct xenbus_device *dev)
+{
+	return 0;
+}
+
+static int pvcalls_front_probe(struct xenbus_device *dev,
+			  const struct xenbus_device_id *id)
+{
+	return 0;
+}
+
+static void pvcalls_front_changed(struct xenbus_device *dev,
+			    enum xenbus_state backend_state)
+{
+}
+
+static struct xenbus_driver pvcalls_front_driver = {
+	.ids = pvcalls_front_ids,
+	.probe = pvcalls_front_probe,
+	.remove = pvcalls_front_remove,
+	.otherend_changed = pvcalls_front_changed,
+};
+
+static int __init pvcalls_frontend_init(void)
+{
+	if (!xen_domain())
+		return -ENODEV;
+
+	pr_info("Initialising Xen pvcalls frontend driver\n");
+
+	return xenbus_register_frontend(&pvcalls_front_driver);
+}
+
+module_init(pvcalls_frontend_init);
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Stefano Stabellini]

Introduce a data structure named pvcalls_bedata. It contains pointers to
the command ring, the event channel, a list of active sockets and a list
of passive sockets. Lists accesses are protected by a spin_lock.

Introduce a waitqueue to allow waiting for a response on commands sent
to the backend.

Introduce an array of struct xen_pvcalls_response to store commands
responses.

pvcalls_refcount is used to keep count of the outstanding pvcalls users.
Only remove connections once the refcount is zero.

Implement pvcalls frontend removal function. Go through the list of
active and passive sockets and free them all, one at a time.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 63 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index a8d38c2..67c8337 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -20,6 +20,42 @@
 #include <xen/xenbus.h>
 #include <xen/interface/io/pvcalls.h>
 
+#define PVCALLS_INVALID_ID UINT_MAX
+#define PVCALLS_RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
+#define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
+
+struct pvcalls_bedata {
+	struct xen_pvcalls_front_ring ring;
+	grant_ref_t ref;
+	int irq;
+
+	struct list_head socket_mappings;
+	struct list_head socketpass_mappings;
+	spinlock_t socket_lock;
+
+	wait_queue_head_t inflight_req;
+	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
+};
+static struct xenbus_device *pvcalls_front_dev;
+static atomic_t pvcalls_refcount;
+
+/* first increment refcount, then proceed */
+#define pvcalls_enter {                     \
+	atomic_inc(&pvcalls_refcount);      \
+	smp_mb();                           \
+}
+
+/* first complete other operations, then decrement refcount */
+#define pvcalls_exit {                      \
+	smp_mb();                           \
+	atomic_dec(&pvcalls_refcount);      \
+}
+
+static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
@@ -27,6 +63,33 @@
 
 static int pvcalls_front_remove(struct xenbus_device *dev)
 {
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map = NULL, *n;
+
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+	dev_set_drvdata(&dev->dev, NULL);
+	pvcalls_front_dev = NULL;
+	if (bedata->irq >= 0)
+		unbind_from_irqhandler(bedata->irq, dev);
+
+	smp_mb();
+	while (atomic_read(&pvcalls_refcount) > 0)
+		cpu_relax();
+	list_for_each_entry_safe(map, n, &bedata->socket_mappings, list) {
+		pvcalls_front_free_map(bedata, map);
+		kfree(map);
+	}
+	list_for_each_entry_safe(map, n, &bedata->socketpass_mappings, list) {
+		spin_lock(&bedata->socket_lock);
+		list_del_init(&map->list);
+		spin_unlock(&bedata->socket_lock);
+		kfree(map);
+	}
+	if (bedata->ref >= 0)
+		gnttab_end_foreign_access(bedata->ref, 0, 0);
+	kfree(bedata->ring.sring);
+	kfree(bedata);
+	xenbus_switch_state(dev, XenbusStateClosed);
 	return 0;
 }
 
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 03/13] xen/pvcalls: connect to the backend

[Stefano Stabellini]

Implement the probe function for the pvcalls frontend. Read the
supported versions, max-page-order and function-calls nodes from
xenstore.

Only one frontend<->backend connection is supported at any given time
for a guest. Store the active frontend device to a static pointer.

Introduce a stub functions for the event handler.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 133 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 67c8337..ffbbcd1 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -96,12 +96,145 @@ static int pvcalls_front_remove(struct xenbus_device *dev)
 static int pvcalls_front_probe(struct xenbus_device *dev,
 			  const struct xenbus_device_id *id)
 {
+	int ret = -ENOMEM, evtchn, i;
+	unsigned int max_page_order, function_calls, len;
+	char *versions;
+	grant_ref_t gref_head = 0;
+	struct xenbus_transaction xbt;
+	struct pvcalls_bedata *bedata = NULL;
+	struct xen_pvcalls_sring *sring;
+
+	if (pvcalls_front_dev != NULL) {
+		dev_err(&dev->dev, "only one PV Calls connection supported\n");
+		return -EINVAL;
+	}
+
+	versions = xenbus_read(XBT_NIL, dev->otherend, "versions", &len);
+	if (!len)
+		return -EINVAL;
+	if (strcmp(versions, "1")) {
+		kfree(versions);
+		return -EINVAL;
+	}
+	kfree(versions);
+	max_page_order = xenbus_read_unsigned(dev->otherend,
+					      "max-page-order", 0);
+	if (max_page_order < PVCALLS_RING_ORDER)
+		return -ENODEV;
+	function_calls = xenbus_read_unsigned(dev->otherend,
+					      "function-calls", 0);
+	/* See XENBUS_FUNCTIONS_CALLS in pvcalls.h */
+	if (function_calls != 1)
+		return -ENODEV;
+	pr_info("%s max-page-order is %u\n", __func__, max_page_order);
+
+	bedata = kzalloc(sizeof(struct pvcalls_bedata), GFP_KERNEL);
+	if (!bedata)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dev->dev, bedata);
+	pvcalls_front_dev = dev;
+	init_waitqueue_head(&bedata->inflight_req);
+	INIT_LIST_HEAD(&bedata->socket_mappings);
+	INIT_LIST_HEAD(&bedata->socketpass_mappings);
+	spin_lock_init(&bedata->socket_lock);
+	bedata->irq = -1;
+	bedata->ref = -1;
+
+	for (i = 0; i < PVCALLS_NR_REQ_PER_RING; i++)
+		bedata->rsp[i].req_id = PVCALLS_INVALID_ID;
+
+	sring = (struct xen_pvcalls_sring *) __get_free_page(GFP_KERNEL |
+							     __GFP_ZERO);
+	if (!sring)
+		goto error;
+	SHARED_RING_INIT(sring);
+	FRONT_RING_INIT(&bedata->ring, sring, XEN_PAGE_SIZE);
+
+	ret = xenbus_alloc_evtchn(dev, &evtchn);
+	if (ret)
+		goto error;
+
+	bedata->irq = bind_evtchn_to_irqhandler(evtchn,
+						pvcalls_front_event_handler,
+						0, "pvcalls-frontend", dev);
+	if (bedata->irq < 0) {
+		ret = bedata->irq;
+		goto error;
+	}
+
+	ret = gnttab_alloc_grant_references(1, &gref_head);
+	if (ret < 0)
+		goto error;
+	bedata->ref = gnttab_claim_grant_reference(&gref_head);
+	if (bedata->ref < 0) {
+		ret = bedata->ref;
+		goto error;
+	}
+	gnttab_grant_foreign_access_ref(bedata->ref, dev->otherend_id,
+					virt_to_gfn((void *)sring), 0);
+
+ again:
+	ret = xenbus_transaction_start(&xbt);
+	if (ret) {
+		xenbus_dev_fatal(dev, ret, "starting transaction");
+		goto error;
+	}
+	ret = xenbus_printf(xbt, dev->nodename, "version", "%u", 1);
+	if (ret)
+		goto error_xenbus;
+	ret = xenbus_printf(xbt, dev->nodename, "ring-ref", "%d", bedata->ref);
+	if (ret)
+		goto error_xenbus;
+	ret = xenbus_printf(xbt, dev->nodename, "port", "%u",
+			    evtchn);
+	if (ret)
+		goto error_xenbus;
+	ret = xenbus_transaction_end(xbt, 0);
+	if (ret) {
+		if (ret == -EAGAIN)
+			goto again;
+		xenbus_dev_fatal(dev, ret, "completing transaction");
+		goto error;
+	}
+	xenbus_switch_state(dev, XenbusStateInitialised);
+
 	return 0;
+
+ error_xenbus:
+	xenbus_transaction_end(xbt, 1);
+	xenbus_dev_fatal(dev, ret, "writing xenstore");
+ error:
+	pvcalls_front_remove(dev);
+	return ret;
 }
 
 static void pvcalls_front_changed(struct xenbus_device *dev,
 			    enum xenbus_state backend_state)
 {
+	switch (backend_state) {
+	case XenbusStateReconfiguring:
+	case XenbusStateReconfigured:
+	case XenbusStateInitialising:
+	case XenbusStateInitialised:
+	case XenbusStateUnknown:
+		break;
+
+	case XenbusStateInitWait:
+		break;
+
+	case XenbusStateConnected:
+		xenbus_switch_state(dev, XenbusStateConnected);
+		break;
+
+	case XenbusStateClosed:
+		if (dev->state == XenbusStateClosed)
+			break;
+		/* Missed the backend's CLOSING state -- fallthrough */
+	case XenbusStateClosing:
+		xenbus_frontend_closed(dev);
+		break;
+	}
 }
 
 static struct xenbus_driver pvcalls_front_driver = {
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 03/13] xen/pvcalls: connect to the backend

[Boris Ostrovsky]

On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> Implement the probe function for the pvcalls frontend. Read the
> supported versions, max-page-order and function-calls nodes from
> xenstore.
>
> Only one frontend<->backend connection is supported at any given time
> for a guest. Store the active frontend device to a static pointer.
>
> Introduce a stub functions for the event handler.
>
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com

Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 04/13] xen/pvcalls: implement socket command and handle events

[Stefano Stabellini]

Send a PVCALLS_SOCKET command to the backend, use the masked
req_prod_pvt as req_id. This way, req_id is guaranteed to be between 0
and PVCALLS_NR_REQ_PER_RING. We already have a slot in the rsp array
ready for the response, and there cannot be two outstanding responses
with the same req_id.

Wait for the response by waiting on the inflight_req waitqueue and
check for the req_id field in rsp[req_id]. Use atomic accesses and
barriers to read the field. Note that the barriers are simple smp
barriers (as opposed to virt barriers) because they are for internal
frontend synchronization, not frontend<->backend communication.

Once a response is received, clear the corresponding rsp slot by setting
req_id to PVCALLS_INVALID_ID. Note that PVCALLS_INVALID_ID is invalid
only from the frontend point of view. It is not part of the PVCalls
protocol.

pvcalls_front_event_handler is in charge of copying responses from the
ring to the appropriate rsp slot. It is done by copying the body of the
response first, then by copying req_id atomically. After the copies,
wake up anybody waiting on waitqueue.

socket_lock protects accesses to the ring.

Create a new struct sock_mapping and convert the pointer into an
uint64_t and use it as id for the new socket to pass to the backend. The
struct will be fully initialized later on connect or bind. In this patch
the struct sock_mapping is empty, the fields will be added by the next
patch.

sock->sk->sk_send_head is not used for ip sockets: reuse the field to
store a pointer to the struct sock_mapping corresponding to the socket.
This way, we can easily get the struct sock_mapping from the struct
socket.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 135 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   8 +++
 2 files changed, 143 insertions(+)
 create mode 100644 drivers/xen/pvcalls-front.h

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index ffbbcd1..1bad1b1 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -20,6 +20,8 @@
 #include <xen/xenbus.h>
 #include <xen/interface/io/pvcalls.h>
 
+#include "pvcalls-front.h"
+
 #define PVCALLS_INVALID_ID UINT_MAX
 #define PVCALLS_RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
 #define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
@@ -51,11 +53,144 @@ struct pvcalls_bedata {
 	atomic_dec(&pvcalls_refcount);      \
 }
 
+struct sock_mapping {
+	bool active_socket;
+	struct list_head list;
+	struct socket *sock;
+};
+
+static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
+{
+	*req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
+	if (RING_FULL(&bedata->ring) ||
+	    READ_ONCE(bedata->rsp[*req_id].req_id) != PVCALLS_INVALID_ID)
+		return -EAGAIN;
+	return 0;
+}
+
 static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
 {
+	struct xenbus_device *dev = dev_id;
+	struct pvcalls_bedata *bedata;
+	struct xen_pvcalls_response *rsp;
+	uint8_t *src, *dst;
+	int req_id = 0, more = 0, done = 0;
+
+	if (dev == NULL)
+		return IRQ_HANDLED;
+
+	pvcalls_enter;
+	bedata = dev_get_drvdata(&dev->dev);
+	if (bedata == NULL) {
+		pvcalls_exit;
+		return IRQ_HANDLED;
+	}
+
+again:
+	while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
+		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
+
+		req_id = rsp->req_id;
+		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
+		src = (uint8_t *)rsp + sizeof(rsp->req_id);
+		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
+		/*
+		 * First copy the rest of the data, then req_id. It is
+		 * paired with the barrier when accessing bedata->rsp.
+		 */
+		smp_wmb();
+		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
+
+		done = 1;
+		bedata->ring.rsp_cons++;
+	}
+
+	RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
+	if (more)
+		goto again;
+	if (done)
+		wake_up(&bedata->inflight_req);
+	pvcalls_exit;
 	return IRQ_HANDLED;
 }
 
+int pvcalls_front_socket(struct socket *sock)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map = NULL;
+	struct xen_pvcalls_request *req;
+	int notify, req_id, ret;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -EACCES;
+	}
+	/*
+	 * PVCalls only supports domain AF_INET,
+	 * type SOCK_STREAM and protocol 0 sockets for now.
+	 *
+	 * Check socket type here, AF_INET and protocol checks are done
+	 * by the caller.
+	 */
+	if (sock->type != SOCK_STREAM) {
+		pvcalls_exit;
+		return -ENOTSUPP;
+	}
+
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (map == NULL) {
+		pvcalls_exit;
+		return -ENOMEM;
+	}
+
+	spin_lock(&bedata->socket_lock);
+
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		kfree(map);
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+
+	/*
+	 * sock->sk->sk_send_head is not used for ip sockets: reuse the
+	 * field to store a pointer to the struct sock_mapping
+	 * corresponding to the socket. This way, we can easily get the
+	 * struct sock_mapping from the struct socket.
+	 */
+	sock->sk->sk_send_head = (void *)map;
+	list_add_tail(&map->list, &bedata->socket_mappings);
+
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_SOCKET;
+	req->u.socket.id = (uint64_t) map;
+	req->u.socket.domain = AF_INET;
+	req->u.socket.type = SOCK_STREAM;
+	req->u.socket.protocol = IPPROTO_IP;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	wait_event(bedata->inflight_req,
+		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
+
+	ret = bedata->rsp[req_id].ret;
+	/* read ret, then set this rsp slot to be reused */
+	smp_mb();
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+
+	pvcalls_exit;
+	return ret;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
new file mode 100644
index 0000000..b7dabed
--- /dev/null
+++ b/drivers/xen/pvcalls-front.h
@@ -0,0 +1,8 @@
+#ifndef __PVCALLS_FRONT_H__
+#define __PVCALLS_FRONT_H__
+
+#include <linux/net.h>
+
+int pvcalls_front_socket(struct socket *sock);
+
+#endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 04/13] xen/pvcalls: implement socket command and handle events

[Boris Ostrovsky]

> +
> +static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
> +{
> +	*req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
> +	if (RING_FULL(&bedata->ring) ||
> +	    READ_ONCE(bedata->rsp[*req_id].req_id) != PVCALLS_INVALID_ID)
> +		return -EAGAIN;
> +	return 0;
> +}
> +
>   static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>   {
> +	struct xenbus_device *dev = dev_id;
> +	struct pvcalls_bedata *bedata;
> +	struct xen_pvcalls_response *rsp;
> +	uint8_t *src, *dst;
> +	int req_id = 0, more = 0, done = 0;
> +
> +	if (dev == NULL)
> +		return IRQ_HANDLED;
> +
> +	pvcalls_enter;
> +	bedata = dev_get_drvdata(&dev->dev);
> +	if (bedata == NULL) {
> +		pvcalls_exit;
> +		return IRQ_HANDLED;
> +	}
> +
> +again:
> +	while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
> +		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
> +
> +		req_id = rsp->req_id;
> +		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
> +		src = (uint8_t *)rsp + sizeof(rsp->req_id);
> +		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> +		/*
> +		 * First copy the rest of the data, then req_id. It is
> +		 * paired with the barrier when accessing bedata->rsp.
> +		 */
> +		smp_wmb();
> +		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> +
> +		done = 1;
> +		bedata->ring.rsp_cons++;
> +	}
> +
> +	RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
> +	if (more)
> +		goto again;
> +	if (done)
> +		wake_up(&bedata->inflight_req);
> +	pvcalls_exit;
>   	return IRQ_HANDLED;
>   }
>   
> +int pvcalls_front_socket(struct socket *sock)
> +{
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map = NULL;
> +	struct xen_pvcalls_request *req;
> +	int notify, req_id, ret;
> +
> +	pvcalls_enter;


Can you define enter/exit macros with parentheses (i.e. 
"pvcalls_enter/exit()')?


> +	if (!pvcalls_front_dev) {
> +		pvcalls_exit;
> +		return -EACCES;
> +	}
> +	/*
> +	 * PVCalls only supports domain AF_INET,
> +	 * type SOCK_STREAM and protocol 0 sockets for now.
> +	 *
> +	 * Check socket type here, AF_INET and protocol checks are done
> +	 * by the caller.
> +	 */
> +	if (sock->type != SOCK_STREAM) {
> +		pvcalls_exit;
> +		return -ENOTSUPP;
> +	}


This can be done without entering pvcalls. I think you can enter pvcalls 
at least right before grabbing socket lock (you may need to move 
dev_get_drvdata() lower).

(possibly in later patches too)


> +
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = kzalloc(sizeof(*map), GFP_KERNEL);
> +	if (map == NULL) {
> +		pvcalls_exit;
> +		return -ENOMEM;
> +	}
> +
> +	spin_lock(&bedata->socket_lock);
> +
> +	ret = get_request(bedata, &req_id);
> +	if (ret < 0) {
> +		kfree(map);
> +		spin_unlock(&bedata->socket_lock);
> +		pvcalls_exit;
> +		return ret;
> +	}
> +
> +	/*
> +	 * sock->sk->sk_send_head is not used for ip sockets: reuse the
> +	 * field to store a pointer to the struct sock_mapping
> +	 * corresponding to the socket. This way, we can easily get the
> +	 * struct sock_mapping from the struct socket.
> +	 */
> +	sock->sk->sk_send_head = (void *)map;
> +	list_add_tail(&map->list, &bedata->socket_mappings);
> +
> +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> +	req->req_id = req_id;
> +	req->cmd = PVCALLS_SOCKET;
> +	req->u.socket.id = (uint64_t) map;
> +	req->u.socket.domain = AF_INET;
> +	req->u.socket.type = SOCK_STREAM;
> +	req->u.socket.protocol = IPPROTO_IP;
> +
> +	bedata->ring.req_prod_pvt++;
> +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> +	spin_unlock(&bedata->socket_lock);
> +	if (notify)
> +		notify_remote_via_irq(bedata->irq);
> +
> +	wait_event(bedata->inflight_req,
> +		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
> +
> +	ret = bedata->rsp[req_id].ret;
> +	/* read ret, then set this rsp slot to be reused */
> +	smp_mb();
> +	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);

Now that I looked at what *_ONCE macros do I am not sure this is needed, 
given the smp_mb() above. In pvcalls_front_event_handler() too. And, in 
fact, in get_request() as well.

(Again, this will probably be also applicable to subsequent patches)

-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 04/13] xen/pvcalls: implement socket command and handle events

[Stefano Stabellini]

On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
> > +
> > +static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
> > +{
> > +	*req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
> > +	if (RING_FULL(&bedata->ring) ||
> > +	    READ_ONCE(bedata->rsp[*req_id].req_id) != PVCALLS_INVALID_ID)
> > +		return -EAGAIN;
> > +	return 0;
> > +}
> > +
> >   static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
> >   {
> > +	struct xenbus_device *dev = dev_id;
> > +	struct pvcalls_bedata *bedata;
> > +	struct xen_pvcalls_response *rsp;
> > +	uint8_t *src, *dst;
> > +	int req_id = 0, more = 0, done = 0;
> > +
> > +	if (dev == NULL)
> > +		return IRQ_HANDLED;
> > +
> > +	pvcalls_enter;
> > +	bedata = dev_get_drvdata(&dev->dev);
> > +	if (bedata == NULL) {
> > +		pvcalls_exit;
> > +		return IRQ_HANDLED;
> > +	}
> > +
> > +again:
> > +	while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
> > +		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
> > +
> > +		req_id = rsp->req_id;
> > +		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
> > +		src = (uint8_t *)rsp + sizeof(rsp->req_id);
> > +		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> > +		/*
> > +		 * First copy the rest of the data, then req_id. It is
> > +		 * paired with the barrier when accessing bedata->rsp.
> > +		 */
> > +		smp_wmb();
> > +		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> > +
> > +		done = 1;
> > +		bedata->ring.rsp_cons++;
> > +	}
> > +
> > +	RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
> > +	if (more)
> > +		goto again;
> > +	if (done)
> > +		wake_up(&bedata->inflight_req);
> > +	pvcalls_exit;
> >   	return IRQ_HANDLED;
> >   }
> >   +int pvcalls_front_socket(struct socket *sock)
> > +{
> > +	struct pvcalls_bedata *bedata;
> > +	struct sock_mapping *map = NULL;
> > +	struct xen_pvcalls_request *req;
> > +	int notify, req_id, ret;
> > +
> > +	pvcalls_enter;
> 
> 
> Can you define enter/exit macros with parentheses (i.e.
> "pvcalls_enter/exit()')?

Sure


> > +	if (!pvcalls_front_dev) {
> > +		pvcalls_exit;
> > +		return -EACCES;
> > +	}
> > +	/*
> > +	 * PVCalls only supports domain AF_INET,
> > +	 * type SOCK_STREAM and protocol 0 sockets for now.
> > +	 *
> > +	 * Check socket type here, AF_INET and protocol checks are done
> > +	 * by the caller.
> > +	 */
> > +	if (sock->type != SOCK_STREAM) {
> > +		pvcalls_exit;
> > +		return -ENOTSUPP;
> > +	}
> 
> 
> This can be done without entering pvcalls. I think you can enter pvcalls at
> least right before grabbing socket lock (you may need to move
> dev_get_drvdata() lower).
> 
> (possibly in later patches too)

OK


> > +
> > +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> > +
> > +	map = kzalloc(sizeof(*map), GFP_KERNEL);
> > +	if (map == NULL) {
> > +		pvcalls_exit;
> > +		return -ENOMEM;
> > +	}
> > +
> > +	spin_lock(&bedata->socket_lock);
> > +
> > +	ret = get_request(bedata, &req_id);
> > +	if (ret < 0) {
> > +		kfree(map);
> > +		spin_unlock(&bedata->socket_lock);
> > +		pvcalls_exit;
> > +		return ret;
> > +	}
> > +
> > +	/*
> > +	 * sock->sk->sk_send_head is not used for ip sockets: reuse the
> > +	 * field to store a pointer to the struct sock_mapping
> > +	 * corresponding to the socket. This way, we can easily get the
> > +	 * struct sock_mapping from the struct socket.
> > +	 */
> > +	sock->sk->sk_send_head = (void *)map;
> > +	list_add_tail(&map->list, &bedata->socket_mappings);
> > +
> > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> > +	req->req_id = req_id;
> > +	req->cmd = PVCALLS_SOCKET;
> > +	req->u.socket.id = (uint64_t) map;
> > +	req->u.socket.domain = AF_INET;
> > +	req->u.socket.type = SOCK_STREAM;
> > +	req->u.socket.protocol = IPPROTO_IP;
> > +
> > +	bedata->ring.req_prod_pvt++;
> > +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> > +	spin_unlock(&bedata->socket_lock);
> > +	if (notify)
> > +		notify_remote_via_irq(bedata->irq);
> > +
> > +	wait_event(bedata->inflight_req,
> > +		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
> > +
> > +	ret = bedata->rsp[req_id].ret;
> > +	/* read ret, then set this rsp slot to be reused */
> > +	smp_mb();
> > +	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> 
> Now that I looked at what *_ONCE macros do I am not sure this is needed, given
> the smp_mb() above. In pvcalls_front_event_handler() too. And, in fact, in
> get_request() as well.
> 
> (Again, this will probably be also applicable to subsequent patches)

Yes, I think you are right, although I think is much easier to use
*_ONCE everywhere we don't want reads/writes to be mangled. Nonetheless,
I removed WRITE_ONCE from places where the write is done immediately
after a barrier. I kept *_ONCE elsewhere.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 04/13] xen/pvcalls: implement socket command and handle events

[Boris Ostrovsky]

On 10/06/2017 02:38 PM, Stefano Stabellini wrote:
> On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
>>> +
>>> +static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
>>> +{
>>> +	*req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
>>> +	if (RING_FULL(&bedata->ring) ||
>>> +	    READ_ONCE(bedata->rsp[*req_id].req_id) != PVCALLS_INVALID_ID)
>>> +		return -EAGAIN;
>>> +	return 0;
>>> +}
>>> +
>>>   static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>>>   {
>>> +	struct xenbus_device *dev = dev_id;
>>> +	struct pvcalls_bedata *bedata;
>>> +	struct xen_pvcalls_response *rsp;
>>> +	uint8_t *src, *dst;
>>> +	int req_id = 0, more = 0, done = 0;
>>> +
>>> +	if (dev == NULL)
>>> +		return IRQ_HANDLED;
>>> +
>>> +	pvcalls_enter;
>>> +	bedata = dev_get_drvdata(&dev->dev);
>>> +	if (bedata == NULL) {
>>> +		pvcalls_exit;
>>> +		return IRQ_HANDLED;
>>> +	}
>>> +
>>> +again:
>>> +	while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
>>> +		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
>>> +
>>> +		req_id = rsp->req_id;
>>> +		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
>>> +		src = (uint8_t *)rsp + sizeof(rsp->req_id);
>>> +		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
>>> +		/*
>>> +		 * First copy the rest of the data, then req_id. It is
>>> +		 * paired with the barrier when accessing bedata->rsp.
>>> +		 */
>>> +		smp_wmb();
>>> +		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
>>> +
>>> +		done = 1;
>>> +		bedata->ring.rsp_cons++;
>>> +	}
>>> +
>>> +	RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
>>> +	if (more)
>>> +		goto again;
>>> +	if (done)
>>> +		wake_up(&bedata->inflight_req);
>>> +	pvcalls_exit;
>>>   	return IRQ_HANDLED;
>>>   }



>>>
>>> +
>>> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
>>> +
>>> +	map = kzalloc(sizeof(*map), GFP_KERNEL);
>>> +	if (map == NULL) {
>>> +		pvcalls_exit;
>>> +		return -ENOMEM;
>>> +	}
>>> +
>>> +	spin_lock(&bedata->socket_lock);
>>> +
>>> +	ret = get_request(bedata, &req_id);
>>> +	if (ret < 0) {
>>> +		kfree(map);
>>> +		spin_unlock(&bedata->socket_lock);
>>> +		pvcalls_exit;
>>> +		return ret;
>>> +	}
>>> +
>>> +	/*
>>> +	 * sock->sk->sk_send_head is not used for ip sockets: reuse the
>>> +	 * field to store a pointer to the struct sock_mapping
>>> +	 * corresponding to the socket. This way, we can easily get the
>>> +	 * struct sock_mapping from the struct socket.
>>> +	 */
>>> +	sock->sk->sk_send_head = (void *)map;
>>> +	list_add_tail(&map->list, &bedata->socket_mappings);
>>> +
>>> +	req = RING_GET_REQUEST(&bedata->ring, req_id);
>>> +	req->req_id = req_id;
>>> +	req->cmd = PVCALLS_SOCKET;
>>> +	req->u.socket.id = (uint64_t) map;
>>> +	req->u.socket.domain = AF_INET;
>>> +	req->u.socket.type = SOCK_STREAM;
>>> +	req->u.socket.protocol = IPPROTO_IP;
>>> +
>>> +	bedata->ring.req_prod_pvt++;
>>> +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
>>> +	spin_unlock(&bedata->socket_lock);
>>> +	if (notify)
>>> +		notify_remote_via_irq(bedata->irq);
>>> +
>>> +	wait_event(bedata->inflight_req,
>>> +		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
>>> +
>>> +	ret = bedata->rsp[req_id].ret;
>>> +	/* read ret, then set this rsp slot to be reused */
>>> +	smp_mb();
>>> +	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
>> Now that I looked at what *_ONCE macros do I am not sure this is needed, given
>> the smp_mb() above. In pvcalls_front_event_handler() too. And, in fact, in
>> get_request() as well.
>>
>> (Again, this will probably be also applicable to subsequent patches)
> Yes, I think you are right, although I think is much easier to use
> *_ONCE everywhere we don't want reads/writes to be mangled. Nonetheless,
> I removed WRITE_ONCE from places where the write is done immediately
> after a barrier. I kept *_ONCE elsewhere.

Adding them when not necessary makes code more difficult to read (and
possibly larger).

Juergen is out now but it would be good to hear what he thinks when he
gets back.

-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 05/13] xen/pvcalls: implement connect command

[Stefano Stabellini]

Send PVCALLS_CONNECT to the backend. Allocate a new ring and evtchn for
the active socket.

Introduce fields in struct sock_mapping to keep track of active sockets.
Introduce a waitqueue to allow the frontend to wait on data coming from
the backend on the active socket (recvmsg command).

Two mutexes (one of reads and one for writes) will be used to protect
the active socket in and out rings from concurrent accesses.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 163 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   2 +
 2 files changed, 165 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 1bad1b1..ef511b6 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -13,6 +13,10 @@
  */
 
 #include <linux/module.h>
+#include <linux/net.h>
+#include <linux/socket.h>
+
+#include <net/sock.h>
 
 #include <xen/events.h>
 #include <xen/grant_table.h>
@@ -57,6 +61,18 @@ struct sock_mapping {
 	bool active_socket;
 	struct list_head list;
 	struct socket *sock;
+	union {
+		struct {
+			int irq;
+			grant_ref_t ref;
+			struct pvcalls_data_intf *ring;
+			struct pvcalls_data data;
+			struct mutex in_mutex;
+			struct mutex out_mutex;
+
+			wait_queue_head_t inflight_conn_req;
+		} active;
+	};
 };
 
 static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
@@ -114,6 +130,18 @@ static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t pvcalls_front_conn_handler(int irq, void *sock_map)
+{
+	struct sock_mapping *map = sock_map;
+
+	if (map == NULL)
+		return IRQ_HANDLED;
+
+	wake_up_interruptible(&map->active.inflight_conn_req);
+
+	return IRQ_HANDLED;
+}
+
 int pvcalls_front_socket(struct socket *sock)
 {
 	struct pvcalls_bedata *bedata;
@@ -191,6 +219,133 @@ int pvcalls_front_socket(struct socket *sock)
 	return ret;
 }
 
+static int create_active(struct sock_mapping *map, int *evtchn)
+{
+	void *bytes;
+	int ret = -ENOMEM, irq = -1, i;
+
+	*evtchn = -1;
+	init_waitqueue_head(&map->active.inflight_conn_req);
+
+	map->active.ring = (struct pvcalls_data_intf *)
+		__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	if (map->active.ring == NULL)
+		goto out_error;
+	map->active.ring->ring_order = PVCALLS_RING_ORDER;
+	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					PVCALLS_RING_ORDER);
+	if (bytes == NULL)
+		goto out_error;
+	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
+		map->active.ring->ref[i] = gnttab_grant_foreign_access(
+			pvcalls_front_dev->otherend_id,
+			pfn_to_gfn(virt_to_pfn(bytes) + i), 0);
+
+	map->active.ref = gnttab_grant_foreign_access(
+		pvcalls_front_dev->otherend_id,
+		pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0);
+
+	map->active.data.in = bytes;
+	map->active.data.out = bytes +
+		XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+
+	ret = xenbus_alloc_evtchn(pvcalls_front_dev, evtchn);
+	if (ret)
+		goto out_error;
+	irq = bind_evtchn_to_irqhandler(*evtchn, pvcalls_front_conn_handler,
+					0, "pvcalls-frontend", map);
+	if (irq < 0) {
+		ret = irq;
+		goto out_error;
+	}
+
+	map->active.irq = irq;
+	map->active_socket = true;
+	mutex_init(&map->active.in_mutex);
+	mutex_init(&map->active.out_mutex);
+
+	return 0;
+
+out_error:
+	if (irq >= 0)
+		unbind_from_irqhandler(irq, map);
+	else if (*evtchn >= 0)
+		xenbus_free_evtchn(pvcalls_front_dev, *evtchn);
+	kfree(map->active.data.in);
+	kfree(map->active.ring);
+	return ret;
+}
+
+int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
+				int addr_len, int flags)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map = NULL;
+	struct xen_pvcalls_request *req;
+	int notify, req_id, ret, evtchn;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENETUNREACH;
+	}
+	if (addr->sa_family != AF_INET || sock->type != SOCK_STREAM) {
+		pvcalls_exit;
+		return -ENOTSUPP;
+	}
+
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+	ret = create_active(map, &evtchn);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_CONNECT;
+	req->u.connect.id = (uint64_t)map;
+	memcpy(req->u.connect.addr, addr, sizeof(*addr));
+	req->u.connect.len = addr_len;
+	req->u.connect.flags = flags;
+	req->u.connect.ref = map->active.ref;
+	req->u.connect.evtchn = evtchn;
+
+	map->sock = sock;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	wait_event(bedata->inflight_req,
+		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
+
+	ret = bedata->rsp[req_id].ret;
+	/* read ret, then set this rsp slot to be reused */
+	smp_mb();
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+	pvcalls_exit;
+	return ret;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
@@ -207,6 +362,14 @@ static int pvcalls_front_remove(struct xenbus_device *dev)
 	if (bedata->irq >= 0)
 		unbind_from_irqhandler(bedata->irq, dev);
 
+	list_for_each_entry_safe(map, n, &bedata->socket_mappings, list) {
+		map->sock->sk->sk_send_head = NULL;
+		if (map->active_socket) {
+			map->active.ring->in_error = -EBADF;
+			wake_up_interruptible(&map->active.inflight_conn_req);
+		}
+	}
+
 	smp_mb();
 	while (atomic_read(&pvcalls_refcount) > 0)
 		cpu_relax();
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index b7dabed..63b0417 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -4,5 +4,7 @@
 #include <linux/net.h>
 
 int pvcalls_front_socket(struct socket *sock);
+int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
+			  int addr_len, int flags);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 05/13] xen/pvcalls: implement connect command

[Boris Ostrovsky]

On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> Send PVCALLS_CONNECT to the backend. Allocate a new ring and evtchn for
> the active socket.
> 
> Introduce fields in struct sock_mapping to keep track of active sockets.
> Introduce a waitqueue to allow the frontend to wait on data coming from
> the backend on the active socket (recvmsg command).
> 
> Two mutexes (one of reads and one for writes) will be used to protect
> the active socket in and out rings from concurrent accesses.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>

Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

with a couple of nits below and comments from previous patch applicable 
here.


> +	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
> +					PVCALLS_RING_ORDER);

I don't think the cast is needed.


> +	map = (struct sock_mapping *) sock->sk->sk_send_head;

Space between cast and variable.

 > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
 > +	req->req_id = req_id;
 > +	req->cmd = PVCALLS_CONNECT;
 > +	req->u.connect.id = (uint64_t)map;
 > +	memcpy(req->u.connect.addr, addr, sizeof(*addr));

Move this down (I don't think there are any dependencies)

 > +	req->u.connect.len = addr_len;
 > +	req->u.connect.flags = flags;
 > +	req->u.connect.ref = map->active.ref;
 > +	req->u.connect.evtchn = evtchn;
 > +


-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 05/13] xen/pvcalls: implement connect command

[Stefano Stabellini]

On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
> On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> > Send PVCALLS_CONNECT to the backend. Allocate a new ring and evtchn for
> > the active socket.
> > 
> > Introduce fields in struct sock_mapping to keep track of active sockets.
> > Introduce a waitqueue to allow the frontend to wait on data coming from
> > the backend on the active socket (recvmsg command).
> > 
> > Two mutexes (one of reads and one for writes) will be used to protect
> > the active socket in and out rings from concurrent accesses.
> > 
> > Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> 
> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> 
> with a couple of nits below and comments from previous patch applicable here.
> 
> 
> > +	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
> > +					PVCALLS_RING_ORDER);
> 
> I don't think the cast is needed.
> 
> 
> > +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> 
> Space between cast and variable.
> 
> > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> > +	req->req_id = req_id;
> > +	req->cmd = PVCALLS_CONNECT;
> > +	req->u.connect.id = (uint64_t)map;
> > +	memcpy(req->u.connect.addr, addr, sizeof(*addr));
> 
> Move this down (I don't think there are any dependencies)

All done, thanks!


> > +	req->u.connect.len = addr_len;
> > +	req->u.connect.flags = flags;
> > +	req->u.connect.ref = map->active.ref;
> > +	req->u.connect.evtchn = evtchn;
> > +


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 05/13] xen/pvcalls: implement connect command

[Stefano Stabellini]

On Fri, 6 Oct 2017, Stefano Stabellini wrote:
> On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
> > On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> > > Send PVCALLS_CONNECT to the backend. Allocate a new ring and evtchn for
> > > the active socket.
> > > 
> > > Introduce fields in struct sock_mapping to keep track of active sockets.
> > > Introduce a waitqueue to allow the frontend to wait on data coming from
> > > the backend on the active socket (recvmsg command).
> > > 
> > > Two mutexes (one of reads and one for writes) will be used to protect
> > > the active socket in and out rings from concurrent accesses.
> > > 
> > > Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> > 
> > Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> > 
> > with a couple of nits below and comments from previous patch applicable here.
> > 
> > 
> > > +	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
> > > +					PVCALLS_RING_ORDER);
> > 
> > I don't think the cast is needed.

actually this cast is needed, I'll keep it

 
> > > +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> > 
> > Space between cast and variable.
> > 
> > > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> > > +	req->req_id = req_id;
> > > +	req->cmd = PVCALLS_CONNECT;
> > > +	req->u.connect.id = (uint64_t)map;
> > > +	memcpy(req->u.connect.addr, addr, sizeof(*addr));
> > 
> > Move this down (I don't think there are any dependencies)
> 
> All done, thanks!
> 
> 
> > > +	req->u.connect.len = addr_len;
> > > +	req->u.connect.flags = flags;
> > > +	req->u.connect.ref = map->active.ref;
> > > +	req->u.connect.evtchn = evtchn;
> > > +
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 06/13] xen/pvcalls: implement bind command

[Stefano Stabellini]

Send PVCALLS_BIND to the backend. Introduce a new structure, part of
struct sock_mapping, to store information specific to passive sockets.

Introduce a status field to keep track of the status of the passive
socket.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |  3 ++
 2 files changed, 71 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index ef511b6..50b6588 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -72,6 +72,13 @@ struct sock_mapping {
 
 			wait_queue_head_t inflight_conn_req;
 		} active;
+		struct {
+		/* Socket status */
+#define PVCALLS_STATUS_UNINITALIZED  0
+#define PVCALLS_STATUS_BIND          1
+#define PVCALLS_STATUS_LISTEN        2
+			uint8_t status;
+		} passive;
 	};
 };
 
@@ -346,6 +353,67 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 	return ret;
 }
 
+int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map = NULL;
+	struct xen_pvcalls_request *req;
+	int notify, req_id, ret;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENOTCONN;
+	}
+	if (addr->sa_family != AF_INET || sock->type != SOCK_STREAM) {
+		pvcalls_exit;
+		return -ENOTSUPP;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (map == NULL) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	map->sock = sock;
+	req->cmd = PVCALLS_BIND;
+	req->u.bind.id = (uint64_t) map;
+	memcpy(req->u.bind.addr, addr, sizeof(*addr));
+	req->u.bind.len = addr_len;
+
+	init_waitqueue_head(&map->passive.inflight_accept_req);
+
+	map->active_socket = false;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	wait_event(bedata->inflight_req,
+		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
+
+	map->passive.status = PVCALLS_STATUS_BIND;
+	ret = bedata->rsp[req_id].ret;
+	/* read ret, then set this rsp slot to be reused */
+	smp_mb();
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+	pvcalls_exit;
+	return 0;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index 63b0417..8b0a274 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -6,5 +6,8 @@
 int pvcalls_front_socket(struct socket *sock);
 int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 			  int addr_len, int flags);
+int pvcalls_front_bind(struct socket *sock,
+		       struct sockaddr *addr,
+		       int addr_len);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 06/13] xen/pvcalls: implement bind command

[Boris Ostrovsky]

On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> Send PVCALLS_BIND to the backend. Introduce a new structure, part of
> struct sock_mapping, to store information specific to passive sockets.
> 
> Introduce a status field to keep track of the status of the passive
> socket.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>   drivers/xen/pvcalls-front.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
>   drivers/xen/pvcalls-front.h |  3 ++
>   2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index ef511b6..50b6588 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -72,6 +72,13 @@ struct sock_mapping {
>   
>   			wait_queue_head_t inflight_conn_req;
>   		} active;
> +		struct {
> +		/* Socket status */
> +#define PVCALLS_STATUS_UNINITALIZED  0
> +#define PVCALLS_STATUS_BIND          1
> +#define PVCALLS_STATUS_LISTEN        2
> +			uint8_t status;
> +		} passive;
>   	};
>   };
>   





> +	req->u.bind.id = (uint64_t) map;

Space between cast and variable (this happens in quite a few places)

> +	memcpy(req->u.bind.addr, addr, sizeof(*addr));
> +	req->u.bind.len = addr_len;
> +
> +	init_waitqueue_head(&map->passive.inflight_accept_req);

This queue is not introduced until patch 8.

-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 06/13] xen/pvcalls: implement bind command

[Stefano Stabellini]

On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
> On 09/15/2017 07:00 PM, Stefano Stabellini wrote:
> > Send PVCALLS_BIND to the backend. Introduce a new structure, part of
> > struct sock_mapping, to store information specific to passive sockets.
> > 
> > Introduce a status field to keep track of the status of the passive
> > socket.
> > 
> > Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> > CC: boris.ostrovsky@oracle.com
> > CC: jgross@suse.com
> > ---
> >   drivers/xen/pvcalls-front.c | 68
> > +++++++++++++++++++++++++++++++++++++++++++++
> >   drivers/xen/pvcalls-front.h |  3 ++
> >   2 files changed, 71 insertions(+)
> > 
> > diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> > index ef511b6..50b6588 100644
> > --- a/drivers/xen/pvcalls-front.c
> > +++ b/drivers/xen/pvcalls-front.c
> > @@ -72,6 +72,13 @@ struct sock_mapping {
> >     			wait_queue_head_t inflight_conn_req;
> >   		} active;
> > +		struct {
> > +		/* Socket status */
> > +#define PVCALLS_STATUS_UNINITALIZED  0
> > +#define PVCALLS_STATUS_BIND          1
> > +#define PVCALLS_STATUS_LISTEN        2
> > +			uint8_t status;
> > +		} passive;
> >   	};
> >   };
> >   
> 
> 
> 
> 
> 
> > +	req->u.bind.id = (uint64_t) map;
> 
> Space between cast and variable (this happens in quite a few places)

OK


> > +	memcpy(req->u.bind.addr, addr, sizeof(*addr));
> > +	req->u.bind.len = addr_len;
> > +
> > +	init_waitqueue_head(&map->passive.inflight_accept_req);
> 
> This queue is not introduced until patch 8.

I'll move it to patch 8

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 07/13] xen/pvcalls: implement listen command

[Stefano Stabellini]

Send PVCALLS_LISTEN to the backend.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 56 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |  1 +
 2 files changed, 57 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 50b6588..4ecc1e5 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -414,6 +414,62 @@ int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
 	return 0;
 }
 
+int pvcalls_front_listen(struct socket *sock, int backlog)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map;
+	struct xen_pvcalls_request *req;
+	int notify, req_id, ret;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENOTCONN;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	if (map->passive.status != PVCALLS_STATUS_BIND) {
+		pvcalls_exit;
+		return -EOPNOTSUPP;
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_LISTEN;
+	req->u.listen.id = (uint64_t) map;
+	req->u.listen.backlog = backlog;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	wait_event(bedata->inflight_req,
+		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
+
+	map->passive.status = PVCALLS_STATUS_LISTEN;
+	ret = bedata->rsp[req_id].ret;
+	/* read ret, then set this rsp slot to be reused */
+	smp_mb();
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+	pvcalls_exit;
+	return ret;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index 8b0a274..aa8fe10 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -9,5 +9,6 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 int pvcalls_front_bind(struct socket *sock,
 		       struct sockaddr *addr,
 		       int addr_len);
+int pvcalls_front_listen(struct socket *sock, int backlog);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 08/13] xen/pvcalls: implement accept command

[Stefano Stabellini]

Introduce a waitqueue to allow only one outstanding accept command at
any given time and to implement polling on the passive socket. Introduce
a flags field to keep track of in-flight accept and poll commands.

Send PVCALLS_ACCEPT to the backend. Allocate a new active socket. Make
sure that only one accept command is executed at any given time by
setting PVCALLS_FLAG_ACCEPT_INFLIGHT and waiting on the
inflight_accept_req waitqueue.

Convert the new struct sock_mapping pointer into an uint64_t and use it
as id for the new socket to pass to the backend.

Check if the accept call is non-blocking: in that case after sending the
ACCEPT command to the backend store the sock_mapping pointer of the new
struct and the inflight req_id then return -EAGAIN (which will respond
only when there is something to accept). Next time accept is called,
we'll check if the ACCEPT command has been answered, if so we'll pick up
where we left off, otherwise we return -EAGAIN again.

Note that, differently from the other commands, we can use
wait_event_interruptible (instead of wait_event) in the case of accept
as we are able to track the req_id of the ACCEPT response that we are
waiting.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 135 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   3 +
 2 files changed, 138 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 4ecc1e5..414eafd 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -78,6 +78,16 @@ struct sock_mapping {
 #define PVCALLS_STATUS_BIND          1
 #define PVCALLS_STATUS_LISTEN        2
 			uint8_t status;
+		/*
+		 * Internal state-machine flags.
+		 * Only one accept operation can be inflight for a socket.
+		 * Only one poll operation can be inflight for a given socket.
+		 */
+#define PVCALLS_FLAG_ACCEPT_INFLIGHT 0
+			uint8_t flags;
+			uint32_t inflight_req_id;
+			struct sock_mapping *accept_map;
+			wait_queue_head_t inflight_accept_req;
 		} passive;
 	};
 };
@@ -470,6 +480,131 @@ int pvcalls_front_listen(struct socket *sock, int backlog)
 	return ret;
 }
 
+int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map;
+	struct sock_mapping *map2 = NULL;
+	struct xen_pvcalls_request *req;
+	int notify, req_id, ret, evtchn, nonblock;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENOTCONN;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	if (map->passive.status != PVCALLS_STATUS_LISTEN) {
+		pvcalls_exit;
+		return -EINVAL;
+	}
+
+	nonblock = flags & SOCK_NONBLOCK;
+	/*
+	 * Backend only supports 1 inflight accept request, will return
+	 * errors for the others
+	 */
+	if (test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
+			     (void *)&map->passive.flags)) {
+		req_id = READ_ONCE(map->passive.inflight_req_id);
+		if (req_id != PVCALLS_INVALID_ID &&
+		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id) {
+			map2 = map->passive.accept_map;
+			goto received;
+		}
+		if (nonblock) {
+			pvcalls_exit;
+			return -EAGAIN;
+		}
+		if (wait_event_interruptible(map->passive.inflight_accept_req,
+			!test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
+					  (void *)&map->passive.flags))) {
+			pvcalls_exit;
+			return -EINTR;
+		}
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+	map2 = kzalloc(sizeof(*map2), GFP_KERNEL);
+	if (map2 == NULL) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return -ENOMEM;
+	}
+	ret =  create_active(map2, &evtchn);
+	if (ret < 0) {
+		kfree(map2);
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return -ENOMEM;
+	}
+	list_add_tail(&map2->list, &bedata->socket_mappings);
+
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_ACCEPT;
+	req->u.accept.id = (uint64_t) map;
+	req->u.accept.ref = map2->active.ref;
+	req->u.accept.id_new = (uint64_t) map2;
+	req->u.accept.evtchn = evtchn;
+	map->passive.accept_map = map2;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+	/* We could check if we have received a response before returning. */
+	if (nonblock) {
+		WRITE_ONCE(map->passive.inflight_req_id, req_id);
+		pvcalls_exit;
+		return -EAGAIN;
+	}
+
+	if (wait_event_interruptible(bedata->inflight_req,
+		READ_ONCE(bedata->rsp[req_id].req_id) == req_id)) {
+		pvcalls_exit;
+		return -EINTR;
+	}
+
+received:
+	map2->sock = newsock;
+	newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
+	if (!newsock->sk) {
+		WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+		WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);
+		pvcalls_front_free_map(bedata, map2);
+		kfree(map2);
+		pvcalls_exit;
+		return -ENOMEM;
+	}
+	newsock->sk->sk_send_head = (void *)map2;
+
+	clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags);
+	wake_up(&map->passive.inflight_accept_req);
+
+	ret = bedata->rsp[req_id].ret;
+	/* read ret, then set this rsp slot to be reused */
+	smp_mb();
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+	WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);
+	pvcalls_exit;
+	return ret;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index aa8fe10..ab4f1da 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -10,5 +10,8 @@ int pvcalls_front_bind(struct socket *sock,
 		       struct sockaddr *addr,
 		       int addr_len);
 int pvcalls_front_listen(struct socket *sock, int backlog);
+int pvcalls_front_accept(struct socket *sock,
+			 struct socket *newsock,
+			 int flags);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 08/13] xen/pvcalls: implement accept command

[Boris Ostrovsky]

> +int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
> +{
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map;
> +	struct sock_mapping *map2 = NULL;
> +	struct xen_pvcalls_request *req;
> +	int notify, req_id, ret, evtchn, nonblock;
> +
> +	pvcalls_enter;
> +	if (!pvcalls_front_dev) {
> +		pvcalls_exit;
> +		return -ENOTCONN;
> +	}
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> +	if (!map) {
> +		pvcalls_exit;
> +		return -ENOTSOCK;
> +	}
> +
> +	if (map->passive.status != PVCALLS_STATUS_LISTEN) {
> +		pvcalls_exit;
> +		return -EINVAL;
> +	}
> +
> +	nonblock = flags & SOCK_NONBLOCK;
> +	/*
> +	 * Backend only supports 1 inflight accept request, will return
> +	 * errors for the others
> +	 */
> +	if (test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> +			     (void *)&map->passive.flags)) {
> +		req_id = READ_ONCE(map->passive.inflight_req_id);
> +		if (req_id != PVCALLS_INVALID_ID &&
> +		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id) {
> +			map2 = map->passive.accept_map;
> +			goto received;
> +		}
> +		if (nonblock) {
> +			pvcalls_exit;
> +			return -EAGAIN;
> +		}
> +		if (wait_event_interruptible(map->passive.inflight_accept_req,
> +			!test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> +					  (void *)&map->passive.flags))) {
> +			pvcalls_exit;
> +			return -EINTR;
> +		}
> +	}
> +
> +	spin_lock(&bedata->socket_lock);
> +	ret = get_request(bedata, &req_id);
> +	if (ret < 0) {
> +		spin_unlock(&bedata->socket_lock);
> +		pvcalls_exit;
> +		return ret;
> +	}
> +	map2 = kzalloc(sizeof(*map2), GFP_KERNEL);
> +	if (map2 == NULL) {
> +		spin_unlock(&bedata->socket_lock);
> +		pvcalls_exit;
> +		return -ENOMEM;
> +	}
> +	ret =  create_active(map2, &evtchn);
> +	if (ret < 0) {
> +		kfree(map2);
> +		spin_unlock(&bedata->socket_lock);
> +		pvcalls_exit;
> +		return -ENOMEM;
> +	}

Do you need to clear PVCALLS_FLAG_ACCEPT_INFLIGHT bit on errors (except 
for EAGAIN/EINTR)?

> +	list_add_tail(&map2->list, &bedata->socket_mappings);
> +
> +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> +	req->req_id = req_id;
> +	req->cmd = PVCALLS_ACCEPT;
> +	req->u.accept.id = (uint64_t) map;
> +	req->u.accept.ref = map2->active.ref;
> +	req->u.accept.id_new = (uint64_t) map2;
> +	req->u.accept.evtchn = evtchn;
> +	map->passive.accept_map = map2;
> +
> +	bedata->ring.req_prod_pvt++;
> +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> +	spin_unlock(&bedata->socket_lock);
> +	if (notify)
> +		notify_remote_via_irq(bedata->irq);
> +	/* We could check if we have received a response before returning. */
> +	if (nonblock) {
> +		WRITE_ONCE(map->passive.inflight_req_id, req_id);
> +		pvcalls_exit;
> +		return -EAGAIN;
> +	}
> +
> +	if (wait_event_interruptible(bedata->inflight_req,
> +		READ_ONCE(bedata->rsp[req_id].req_id) == req_id)) {
> +		pvcalls_exit;
> +		return -EINTR;
> +	}
> +
> +received:
> +	map2->sock = newsock;
> +	newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
> +	if (!newsock->sk) {
> +		WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> +		WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);
> +		pvcalls_front_free_map(bedata, map2);
> +		kfree(map2);
> +		pvcalls_exit;
> +		return -ENOMEM;
> +	}
> +	newsock->sk->sk_send_head = (void *)map2;
> +
> +	clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags);
> +	wake_up(&map->passive.inflight_accept_req);
> +
> +	ret = bedata->rsp[req_id].ret;
> +	/* read ret, then set this rsp slot to be reused */
> +	smp_mb();
> +	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> +	WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);

Should inflight_req_id be cleared at the same time as 
PVCALLS_FLAG_ACCEPT_INFLIGHT? They kind of belong together, don't they?

And I wonder whether you actually need the flag --- can you just key off 
map->passive.inflight_req_id not being PVCALLS_INVALID_ID?

(and again, I am not sure about all READ/WRITE_ONCE() macros here).


-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 08/13] xen/pvcalls: implement accept command

[Stefano Stabellini]

On Thu, 21 Sep 2017, Boris Ostrovsky wrote:
> > +int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int
> > flags)
> > +{
> > +	struct pvcalls_bedata *bedata;
> > +	struct sock_mapping *map;
> > +	struct sock_mapping *map2 = NULL;
> > +	struct xen_pvcalls_request *req;
> > +	int notify, req_id, ret, evtchn, nonblock;
> > +
> > +	pvcalls_enter;
> > +	if (!pvcalls_front_dev) {
> > +		pvcalls_exit;
> > +		return -ENOTCONN;
> > +	}
> > +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> > +
> > +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> > +	if (!map) {
> > +		pvcalls_exit;
> > +		return -ENOTSOCK;
> > +	}
> > +
> > +	if (map->passive.status != PVCALLS_STATUS_LISTEN) {
> > +		pvcalls_exit;
> > +		return -EINVAL;
> > +	}
> > +
> > +	nonblock = flags & SOCK_NONBLOCK;
> > +	/*
> > +	 * Backend only supports 1 inflight accept request, will return
> > +	 * errors for the others
> > +	 */
> > +	if (test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> > +			     (void *)&map->passive.flags)) {
> > +		req_id = READ_ONCE(map->passive.inflight_req_id);
> > +		if (req_id != PVCALLS_INVALID_ID &&
> > +		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id) {
> > +			map2 = map->passive.accept_map;
> > +			goto received;
> > +		}
> > +		if (nonblock) {
> > +			pvcalls_exit;
> > +			return -EAGAIN;
> > +		}
> > +		if (wait_event_interruptible(map->passive.inflight_accept_req,
> > +			!test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> > +					  (void *)&map->passive.flags))) {
> > +			pvcalls_exit;
> > +			return -EINTR;
> > +		}
> > +	}
> > +
> > +	spin_lock(&bedata->socket_lock);
> > +	ret = get_request(bedata, &req_id);
> > +	if (ret < 0) {
> > +		spin_unlock(&bedata->socket_lock);
> > +		pvcalls_exit;
> > +		return ret;
> > +	}
> > +	map2 = kzalloc(sizeof(*map2), GFP_KERNEL);
> > +	if (map2 == NULL) {
> > +		spin_unlock(&bedata->socket_lock);
> > +		pvcalls_exit;
> > +		return -ENOMEM;
> > +	}
> > +	ret =  create_active(map2, &evtchn);
> > +	if (ret < 0) {
> > +		kfree(map2);
> > +		spin_unlock(&bedata->socket_lock);
> > +		pvcalls_exit;
> > +		return -ENOMEM;
> > +	}
> 
> Do you need to clear PVCALLS_FLAG_ACCEPT_INFLIGHT bit on errors (except for
> EAGAIN/EINTR)?

Yes, you are right, I'll do that. Well spotted!


> > +	list_add_tail(&map2->list, &bedata->socket_mappings);
> > +
> > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> > +	req->req_id = req_id;
> > +	req->cmd = PVCALLS_ACCEPT;
> > +	req->u.accept.id = (uint64_t) map;
> > +	req->u.accept.ref = map2->active.ref;
> > +	req->u.accept.id_new = (uint64_t) map2;
> > +	req->u.accept.evtchn = evtchn;
> > +	map->passive.accept_map = map2;
> > +
> > +	bedata->ring.req_prod_pvt++;
> > +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> > +	spin_unlock(&bedata->socket_lock);
> > +	if (notify)
> > +		notify_remote_via_irq(bedata->irq);
> > +	/* We could check if we have received a response before returning. */
> > +	if (nonblock) {
> > +		WRITE_ONCE(map->passive.inflight_req_id, req_id);
> > +		pvcalls_exit;
> > +		return -EAGAIN;
> > +	}
> > +
> > +	if (wait_event_interruptible(bedata->inflight_req,
> > +		READ_ONCE(bedata->rsp[req_id].req_id) == req_id)) {
> > +		pvcalls_exit;
> > +		return -EINTR;
> > +	}
> > +
> > +received:
> > +	map2->sock = newsock;
> > +	newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
> > +	if (!newsock->sk) {
> > +		WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> > +		WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);
> > +		pvcalls_front_free_map(bedata, map2);
> > +		kfree(map2);
> > +		pvcalls_exit;
> > +		return -ENOMEM;
> > +	}
> > +	newsock->sk->sk_send_head = (void *)map2;
> > +
> > +	clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags);
> > +	wake_up(&map->passive.inflight_accept_req);
> > +
> > +	ret = bedata->rsp[req_id].ret;
> > +	/* read ret, then set this rsp slot to be reused */
> > +	smp_mb();
> > +	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> > +	WRITE_ONCE(map->passive.inflight_req_id, PVCALLS_INVALID_ID);
> 
> Should inflight_req_id be cleared at the same time as
> PVCALLS_FLAG_ACCEPT_INFLIGHT? They kind of belong together, don't they?

It is not necessary that they are cleared exactly at the same time but
it makes sense from a code readability point of view, so I'll do that.


> And I wonder whether you actually need the flag --- can you just key off
> map->passive.inflight_req_id not being PVCALLS_INVALID_ID?

We need the flag because we don't have the req_id at the beginning of
the accept function.


> (and again, I am not sure about all READ/WRITE_ONCE() macros here).

Yes, they are not needed

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 09/13] xen/pvcalls: implement sendmsg

[Stefano Stabellini]

Send data to an active socket by copying data to the "out" ring. Take
the active socket out_mutex so that only one function can access the
ring at any given time.

If not enough room is available on the ring, rather than returning
immediately or sleep-waiting, spin for up to 5000 cycles. This small
optimization turns out to improve performance significantly.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 119 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   3 ++
 2 files changed, 122 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 414eafd..2907e85 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -29,6 +29,7 @@
 #define PVCALLS_INVALID_ID UINT_MAX
 #define PVCALLS_RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
 #define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
+#define PVCALLS_FRONT_MAX_SPIN 5000
 
 struct pvcalls_bedata {
 	struct xen_pvcalls_front_ring ring;
@@ -101,6 +102,22 @@ static inline int get_request(struct pvcalls_bedata *bedata, int *req_id)
 	return 0;
 }
 
+static bool pvcalls_front_write_todo(struct sock_mapping *map)
+{
+	struct pvcalls_data_intf *intf = map->active.ring;
+	RING_IDX cons, prod, size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+	int32_t error;
+
+	cons = intf->out_cons;
+	prod = intf->out_prod;
+	error = intf->out_error;
+	if (error == -ENOTCONN)
+		return false;
+	if (error != 0)
+		return true;
+	return !!(size - pvcalls_queued(prod, cons, size));
+}
+
 static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
 {
 	struct xenbus_device *dev = dev_id;
@@ -363,6 +380,108 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 	return ret;
 }
 
+static int __write_ring(struct pvcalls_data_intf *intf,
+			struct pvcalls_data *data,
+			struct iov_iter *msg_iter,
+			int len)
+{
+	RING_IDX cons, prod, size, masked_prod, masked_cons;
+	RING_IDX array_size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+	int32_t error;
+
+	error = intf->out_error;
+	if (error < 0)
+		return error;
+	cons = intf->out_cons;
+	prod = intf->out_prod;
+	/* read indexes before continuing */
+	virt_mb();
+
+	size = pvcalls_queued(prod, cons, array_size);
+	if (size >= array_size)
+		return 0;
+	if (len > array_size - size)
+		len = array_size - size;
+
+	masked_prod = pvcalls_mask(prod, array_size);
+	masked_cons = pvcalls_mask(cons, array_size);
+
+	if (masked_prod < masked_cons) {
+		copy_from_iter(data->out + masked_prod, len, msg_iter);
+	} else {
+		if (len > array_size - masked_prod) {
+			copy_from_iter(data->out + masked_prod,
+				       array_size - masked_prod, msg_iter);
+			copy_from_iter(data->out,
+				       len - (array_size - masked_prod),
+				       msg_iter);
+		} else {
+			copy_from_iter(data->out + masked_prod, len, msg_iter);
+		}
+	}
+	/* write to ring before updating pointer */
+	virt_wmb();
+	intf->out_prod += len;
+
+	return len;
+}
+
+int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
+			  size_t len)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map;
+	int sent, tot_sent = 0;
+	int count = 0, flags;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENOTCONN;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	flags = msg->msg_flags;
+	if (flags & (MSG_CONFIRM|MSG_DONTROUTE|MSG_EOR|MSG_OOB)) {
+		pvcalls_exit;
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&map->active.out_mutex);
+	if ((flags & MSG_DONTWAIT) && !pvcalls_front_write_todo(map)) {
+		mutex_unlock(&map->active.out_mutex);
+		pvcalls_exit;
+		return -EAGAIN;
+	}
+	if (len > INT_MAX)
+		len = INT_MAX;
+
+again:
+	count++;
+	sent = __write_ring(map->active.ring,
+			    &map->active.data, &msg->msg_iter,
+			    len);
+	if (sent > 0) {
+		len -= sent;
+		tot_sent += sent;
+		notify_remote_via_irq(map->active.irq);
+	}
+	if (sent >= 0 && len > 0 && count < PVCALLS_FRONT_MAX_SPIN)
+		goto again;
+	if (sent < 0)
+		tot_sent = sent;
+
+	mutex_unlock(&map->active.out_mutex);
+	pvcalls_exit;
+	return tot_sent;
+}
+
 int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
 {
 	struct pvcalls_bedata *bedata;
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index ab4f1da..d937c24 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -13,5 +13,8 @@ int pvcalls_front_bind(struct socket *sock,
 int pvcalls_front_accept(struct socket *sock,
 			 struct socket *newsock,
 			 int flags);
+int pvcalls_front_sendmsg(struct socket *sock,
+			  struct msghdr *msg,
+			  size_t len);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 10/13] xen/pvcalls: implement recvmsg

[Stefano Stabellini]

Implement recvmsg by copying data from the "in" ring. If not enough data
is available and the recvmsg call is blocking, then wait on the
inflight_conn_req waitqueue. Take the active socket in_mutex so that
only one function can access the ring at any given time.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 110 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   4 ++
 2 files changed, 114 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 2907e85..01a5a69 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -118,6 +118,20 @@ static bool pvcalls_front_write_todo(struct sock_mapping *map)
 	return !!(size - pvcalls_queued(prod, cons, size));
 }
 
+static bool pvcalls_front_read_todo(struct sock_mapping *map)
+{
+	struct pvcalls_data_intf *intf = map->active.ring;
+	RING_IDX cons, prod;
+	int32_t error;
+
+	cons = intf->in_cons;
+	prod = intf->in_prod;
+	error = intf->in_error;
+	return (error != 0 ||
+		pvcalls_queued(prod, cons,
+			       XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER)) != 0);
+}
+
 static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
 {
 	struct xenbus_device *dev = dev_id;
@@ -482,6 +496,102 @@ int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
 	return tot_sent;
 }
 
+static int __read_ring(struct pvcalls_data_intf *intf,
+		       struct pvcalls_data *data,
+		       struct iov_iter *msg_iter,
+		       size_t len, int flags)
+{
+	RING_IDX cons, prod, size, masked_prod, masked_cons;
+	RING_IDX array_size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+	int32_t error;
+
+	cons = intf->in_cons;
+	prod = intf->in_prod;
+	error = intf->in_error;
+	/* get pointers before reading from the ring */
+	virt_rmb();
+	if (error < 0)
+		return error;
+
+	size = pvcalls_queued(prod, cons, array_size);
+	masked_prod = pvcalls_mask(prod, array_size);
+	masked_cons = pvcalls_mask(cons, array_size);
+
+	if (size == 0)
+		return 0;
+
+	if (len > size)
+		len = size;
+
+	if (masked_prod > masked_cons) {
+		copy_to_iter(data->in + masked_cons, len, msg_iter);
+	} else {
+		if (len > (array_size - masked_cons)) {
+			copy_to_iter(data->in + masked_cons,
+				     array_size - masked_cons, msg_iter);
+			copy_to_iter(data->in,
+				     len - (array_size - masked_cons),
+				     msg_iter);
+		} else {
+			copy_to_iter(data->in + masked_cons, len, msg_iter);
+		}
+	}
+	/* read data from the ring before increasing the index */
+	virt_mb();
+	if (!(flags & MSG_PEEK))
+		intf->in_cons += len;
+
+	return len;
+}
+
+int pvcalls_front_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
+		     int flags)
+{
+	struct pvcalls_bedata *bedata;
+	int ret;
+	struct sock_mapping *map;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -ENOTCONN;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return -ENOTSOCK;
+	}
+
+	if (flags & (MSG_CMSG_CLOEXEC|MSG_ERRQUEUE|MSG_OOB|MSG_TRUNC)) {
+		pvcalls_exit;
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&map->active.in_mutex);
+	if (len > XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER))
+		len = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+
+	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
+		wait_event_interruptible(map->active.inflight_conn_req,
+					 pvcalls_front_read_todo(map));
+	}
+	ret = __read_ring(map->active.ring, &map->active.data,
+			  &msg->msg_iter, len, flags);
+
+	if (ret > 0)
+		notify_remote_via_irq(map->active.irq);
+	if (ret == 0)
+		ret = -EAGAIN;
+	if (ret == -ENOTCONN)
+		ret = 0;
+
+	mutex_unlock(&map->active.in_mutex);
+	pvcalls_exit;
+	return ret;
+}
+
 int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
 {
 	struct pvcalls_bedata *bedata;
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index d937c24..de24041 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -16,5 +16,9 @@ int pvcalls_front_accept(struct socket *sock,
 int pvcalls_front_sendmsg(struct socket *sock,
 			  struct msghdr *msg,
 			  size_t len);
+int pvcalls_front_recvmsg(struct socket *sock,
+			  struct msghdr *msg,
+			  size_t len,
+			  int flags);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 11/13] xen/pvcalls: implement poll command

[Stefano Stabellini]

For active sockets, check the indexes and use the inflight_conn_req
waitqueue to wait.

For passive sockets if an accept is outstanding
(PVCALLS_FLAG_ACCEPT_INFLIGHT), check if it has been answered by looking
at bedata->rsp[req_id]. If so, return POLLIN.  Otherwise use the
inflight_accept_req waitqueue.

If no accepts are inflight, send PVCALLS_POLL to the backend. If we have
outstanding POLL requests awaiting for a response use the inflight_req
waitqueue: inflight_req is awaken when a new response is received; on
wakeup we check whether the POLL response is arrived by looking at the
PVCALLS_FLAG_POLL_RET flag. We set the flag from
pvcalls_front_event_handler, if the response was for a POLL command.

In pvcalls_front_event_handler, get the struct sock_mapping from the
poll id (we previously converted struct sock_mapping* to uint64_t and
used it as id).

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 144 +++++++++++++++++++++++++++++++++++++++++---
 drivers/xen/pvcalls-front.h |   3 +
 2 files changed, 138 insertions(+), 9 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 01a5a69..8a90213 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -85,6 +85,8 @@ struct sock_mapping {
 		 * Only one poll operation can be inflight for a given socket.
 		 */
 #define PVCALLS_FLAG_ACCEPT_INFLIGHT 0
+#define PVCALLS_FLAG_POLL_INFLIGHT   1
+#define PVCALLS_FLAG_POLL_RET        2
 			uint8_t flags;
 			uint32_t inflight_req_id;
 			struct sock_mapping *accept_map;
@@ -155,15 +157,32 @@ static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
 		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
 
 		req_id = rsp->req_id;
-		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
-		src = (uint8_t *)rsp + sizeof(rsp->req_id);
-		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
-		/*
-		 * First copy the rest of the data, then req_id. It is
-		 * paired with the barrier when accessing bedata->rsp.
-		 */
-		smp_wmb();
-		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
+		if (rsp->cmd == PVCALLS_POLL) {
+			struct sock_mapping *map = (struct sock_mapping *)
+						   rsp->u.poll.id;
+
+			set_bit(PVCALLS_FLAG_POLL_RET,
+				(void *)&map->passive.flags);
+			/*
+			 * Set RET, then clear INFLIGHT. It pairs with
+			 * the checks at the beginning of
+			 * pvcalls_front_poll_passive.
+			 */
+			smp_wmb();
+			clear_bit(PVCALLS_FLAG_POLL_INFLIGHT,
+				  (void *)&map->passive.flags);
+		} else {
+			dst = (uint8_t *)&bedata->rsp[req_id] +
+			      sizeof(rsp->req_id);
+			src = (uint8_t *)rsp + sizeof(rsp->req_id);
+			memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
+			/*
+			 * First copy the rest of the data, then req_id. It is
+			 * paired with the barrier when accessing bedata->rsp.
+			 */
+			smp_wmb();
+			WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
+		}
 
 		done = 1;
 		bedata->ring.rsp_cons++;
@@ -834,6 +853,113 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 	return ret;
 }
 
+static unsigned int pvcalls_front_poll_passive(struct file *file,
+					       struct pvcalls_bedata *bedata,
+					       struct sock_mapping *map,
+					       poll_table *wait)
+{
+	int notify, req_id, ret;
+	struct xen_pvcalls_request *req;
+
+	if (test_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
+		     (void *)&map->passive.flags)) {
+		uint32_t req_id = READ_ONCE(map->passive.inflight_req_id);
+
+		if (req_id != PVCALLS_INVALID_ID &&
+		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id)
+			return POLLIN | POLLRDNORM;
+
+		poll_wait(file, &map->passive.inflight_accept_req, wait);
+		return 0;
+	}
+
+	if (test_and_clear_bit(PVCALLS_FLAG_POLL_RET,
+			       (void *)&map->passive.flags))
+		return POLLIN | POLLRDNORM;
+
+	/*
+	 * First check RET, then INFLIGHT. No barriers necessary to
+	 * ensure execution ordering because of the conditional
+	 * instructions creating control dependencies.
+	 */
+
+	if (test_and_set_bit(PVCALLS_FLAG_POLL_INFLIGHT,
+			     (void *)&map->passive.flags)) {
+		poll_wait(file, &bedata->inflight_req, wait);
+		return 0;
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		return ret;
+	}
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_POLL;
+	req->u.poll.id = (uint64_t) map;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	poll_wait(file, &bedata->inflight_req, wait);
+	return 0;
+}
+
+static unsigned int pvcalls_front_poll_active(struct file *file,
+					      struct pvcalls_bedata *bedata,
+					      struct sock_mapping *map,
+					      poll_table *wait)
+{
+	unsigned int mask = 0;
+	int32_t in_error, out_error;
+	struct pvcalls_data_intf *intf = map->active.ring;
+
+	out_error = intf->out_error;
+	in_error = intf->in_error;
+
+	poll_wait(file, &map->active.inflight_conn_req, wait);
+	if (pvcalls_front_write_todo(map))
+		mask |= POLLOUT | POLLWRNORM;
+	if (pvcalls_front_read_todo(map))
+		mask |= POLLIN | POLLRDNORM;
+	if (in_error != 0 || out_error != 0)
+		mask |= POLLERR;
+
+	return mask;
+}
+
+unsigned int pvcalls_front_poll(struct file *file, struct socket *sock,
+			       poll_table *wait)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map;
+	int ret;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return POLLNVAL;
+	}
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (!map) {
+		pvcalls_exit;
+		return POLLNVAL;
+	}
+	if (map->active_socket)
+		ret = pvcalls_front_poll_active(file, bedata, map, wait);
+	else
+		ret = pvcalls_front_poll_passive(file, bedata, map, wait);
+	pvcalls_exit;
+	return ret;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index de24041..25e05b8 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -20,5 +20,8 @@ int pvcalls_front_recvmsg(struct socket *sock,
 			  struct msghdr *msg,
 			  size_t len,
 			  int flags);
+unsigned int pvcalls_front_poll(struct file *file,
+				struct socket *sock,
+				poll_table *wait);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 12/13] xen/pvcalls: implement release command

[Stefano Stabellini]

Send PVCALLS_RELEASE to the backend and wait for a reply. Take both
in_mutex and out_mutex to avoid concurrent accesses. Then, free the
socket.

For passive sockets, check whether we have already pre-allocated an
active socket for the purpose of being accepted. If so, free that as
well.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/pvcalls-front.c | 104 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/xen/pvcalls-front.h |   1 +
 2 files changed, 105 insertions(+)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 8a90213..5f8e94a 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -209,6 +209,24 @@ static irqreturn_t pvcalls_front_conn_handler(int irq, void *sock_map)
 	return IRQ_HANDLED;
 }
 
+static void pvcalls_front_free_map(struct pvcalls_bedata *bedata,
+				   struct sock_mapping *map)
+{
+	int i;
+
+	unbind_from_irqhandler(map->active.irq, map);
+
+	spin_lock(&bedata->socket_lock);
+	if (!list_empty(&map->list))
+		list_del_init(&map->list);
+	spin_unlock(&bedata->socket_lock);
+
+	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
+		gnttab_end_foreign_access(map->active.ring->ref[i], 0, 0);
+	gnttab_end_foreign_access(map->active.ref, 0, 0);
+	free_page((unsigned long)map->active.ring);
+}
+
 int pvcalls_front_socket(struct socket *sock)
 {
 	struct pvcalls_bedata *bedata;
@@ -960,6 +978,92 @@ unsigned int pvcalls_front_poll(struct file *file, struct socket *sock,
 	return ret;
 }
 
+int pvcalls_front_release(struct socket *sock)
+{
+	struct pvcalls_bedata *bedata;
+	struct sock_mapping *map;
+	int req_id, notify, ret;
+	struct xen_pvcalls_request *req;
+
+	pvcalls_enter;
+	if (!pvcalls_front_dev) {
+		pvcalls_exit;
+		return -EIO;
+	}
+	if (sock->sk == NULL) {
+		pvcalls_exit;
+		return 0;
+	}
+
+	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+
+	map = (struct sock_mapping *) sock->sk->sk_send_head;
+	if (map == NULL) {
+		pvcalls_exit;
+		return 0;
+	}
+
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
+		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit;
+		return ret;
+	}
+	sock->sk->sk_send_head = NULL;
+
+	req = RING_GET_REQUEST(&bedata->ring, req_id);
+	req->req_id = req_id;
+	req->cmd = PVCALLS_RELEASE;
+	req->u.release.id = (uint64_t)map;
+
+	bedata->ring.req_prod_pvt++;
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
+	spin_unlock(&bedata->socket_lock);
+	if (notify)
+		notify_remote_via_irq(bedata->irq);
+
+	wait_event(bedata->inflight_req,
+		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
+
+	if (map->active_socket) {
+		/*
+		 * Set in_error and wake up inflight_conn_req to force
+		 * recvmsg waiters to exit.
+		 */
+		map->active.ring->in_error = -EBADF;
+		wake_up_interruptible(&map->active.inflight_conn_req);
+
+		/*
+		 * Wait until there are no more waiters on the mutexes.
+		 * We know that no new waiters can be added because sk_send_head
+		 * is set to NULL -- we only need to wait for the existing
+		 * waiters to return.
+		 */
+		while (!mutex_trylock(&map->active.in_mutex) ||
+			   !mutex_trylock(&map->active.out_mutex))
+			cpu_relax();
+
+		pvcalls_front_free_map(bedata, map);
+		kfree(map);
+	} else {
+		spin_lock(&bedata->socket_lock);
+		if (READ_ONCE(map->passive.inflight_req_id) !=
+		    PVCALLS_INVALID_ID) {
+			pvcalls_front_free_map(bedata,
+					       map->passive.accept_map);
+			kfree(map->passive.accept_map);
+		}
+		list_del_init(&map->list);
+		kfree(map);
+		spin_unlock(&bedata->socket_lock);
+	}
+	WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
+
+	pvcalls_exit;
+	return 0;
+}
+
 static const struct xenbus_device_id pvcalls_front_ids[] = {
 	{ "pvcalls" },
 	{ "" }
diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
index 25e05b8..3332978 100644
--- a/drivers/xen/pvcalls-front.h
+++ b/drivers/xen/pvcalls-front.h
@@ -23,5 +23,6 @@ int pvcalls_front_recvmsg(struct socket *sock,
 unsigned int pvcalls_front_poll(struct file *file,
 				struct socket *sock,
 				poll_table *wait);
+int pvcalls_front_release(struct socket *sock);
 
 #endif
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v4 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend

[Stefano Stabellini]

Also add pvcalls-front to the Makefile.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
---
 drivers/xen/Kconfig  | 9 +++++++++
 drivers/xen/Makefile | 1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 4545561..0b2c828 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -196,6 +196,15 @@ config XEN_PCIDEV_BACKEND
 
 	  If in doubt, say m.
 
+config XEN_PVCALLS_FRONTEND
+	tristate "XEN PV Calls frontend driver"
+	depends on INET && XEN
+	help
+	  Experimental frontend for the Xen PV Calls protocol
+	  (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It
+	  sends a small set of POSIX calls to the backend, which
+	  implements them.
+
 config XEN_PVCALLS_BACKEND
 	bool "XEN PV Calls backend driver"
 	depends on INET && XEN && XEN_BACKEND
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 480b928..afb9e03 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_XEN_EFI)			+= efi.o
 obj-$(CONFIG_XEN_SCSI_BACKEND)		+= xen-scsiback.o
 obj-$(CONFIG_XEN_AUTO_XLATE)		+= xlate_mmu.o
 obj-$(CONFIG_XEN_PVCALLS_BACKEND)	+= pvcalls-back.o
+obj-$(CONFIG_XEN_PVCALLS_FRONTEND)	+= pvcalls-front.o
 xen-evtchn-y				:= evtchn.o
 xen-gntdev-y				:= gntdev.o
 xen-gntalloc-y				:= gntalloc.o
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 11/13] xen/pvcalls: implement poll command

[Andrea Parri]

Hi Stefano,

On Fri, Sep 15, 2017 at 04:00:38PM -0700, Stefano Stabellini wrote:
> For active sockets, check the indexes and use the inflight_conn_req
> waitqueue to wait.
> 
> For passive sockets if an accept is outstanding
> (PVCALLS_FLAG_ACCEPT_INFLIGHT), check if it has been answered by looking
> at bedata->rsp[req_id]. If so, return POLLIN.  Otherwise use the
> inflight_accept_req waitqueue.
> 
> If no accepts are inflight, send PVCALLS_POLL to the backend. If we have
> outstanding POLL requests awaiting for a response use the inflight_req
> waitqueue: inflight_req is awaken when a new response is received; on
> wakeup we check whether the POLL response is arrived by looking at the
> PVCALLS_FLAG_POLL_RET flag. We set the flag from
> pvcalls_front_event_handler, if the response was for a POLL command.
> 
> In pvcalls_front_event_handler, get the struct sock_mapping from the
> poll id (we previously converted struct sock_mapping* to uint64_t and
> used it as id).
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>  drivers/xen/pvcalls-front.c | 144 +++++++++++++++++++++++++++++++++++++++++---
>  drivers/xen/pvcalls-front.h |   3 +
>  2 files changed, 138 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index 01a5a69..8a90213 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -85,6 +85,8 @@ struct sock_mapping {
>  		 * Only one poll operation can be inflight for a given socket.
>  		 */
>  #define PVCALLS_FLAG_ACCEPT_INFLIGHT 0
> +#define PVCALLS_FLAG_POLL_INFLIGHT   1
> +#define PVCALLS_FLAG_POLL_RET        2
>  			uint8_t flags;
>  			uint32_t inflight_req_id;
>  			struct sock_mapping *accept_map;
> @@ -155,15 +157,32 @@ static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>  		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
>  
>  		req_id = rsp->req_id;
> -		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
> -		src = (uint8_t *)rsp + sizeof(rsp->req_id);
> -		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> -		/*
> -		 * First copy the rest of the data, then req_id. It is
> -		 * paired with the barrier when accessing bedata->rsp.
> -		 */
> -		smp_wmb();
> -		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> +		if (rsp->cmd == PVCALLS_POLL) {
> +			struct sock_mapping *map = (struct sock_mapping *)
> +						   rsp->u.poll.id;
> +
> +			set_bit(PVCALLS_FLAG_POLL_RET,
> +				(void *)&map->passive.flags);
> +			/*
> +			 * Set RET, then clear INFLIGHT. It pairs with
> +			 * the checks at the beginning of
> +			 * pvcalls_front_poll_passive.
> +			 */
> +			smp_wmb();

pvcalls_front_poll_passive() seems to first check RET, then INFLIGHT
(no "crossing of mem. locations"): can you elaborate here?


> +			clear_bit(PVCALLS_FLAG_POLL_INFLIGHT,
> +				  (void *)&map->passive.flags);
> +		} else {
> +			dst = (uint8_t *)&bedata->rsp[req_id] +
> +			      sizeof(rsp->req_id);
> +			src = (uint8_t *)rsp + sizeof(rsp->req_id);
> +			memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> +			/*
> +			 * First copy the rest of the data, then req_id. It is
> +			 * paired with the barrier when accessing bedata->rsp.
> +			 */
> +			smp_wmb();

Would you point me to the "pairing barrier"? (not sure I understand
the logic here...)


> +			WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);

Could this be rewritten as

   WRITE_ONCE(bedata->rsp[req_id].req_id, req_id);


> +		}
>  
>  		done = 1;
>  		bedata->ring.rsp_cons++;
> @@ -834,6 +853,113 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
>  	return ret;
>  }
>  
> +static unsigned int pvcalls_front_poll_passive(struct file *file,
> +					       struct pvcalls_bedata *bedata,
> +					       struct sock_mapping *map,
> +					       poll_table *wait)
> +{
> +	int notify, req_id, ret;
> +	struct xen_pvcalls_request *req;
> +
> +	if (test_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> +		     (void *)&map->passive.flags)) {
> +		uint32_t req_id = READ_ONCE(map->passive.inflight_req_id);
> +
> +		if (req_id != PVCALLS_INVALID_ID &&
> +		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id)
> +			return POLLIN | POLLRDNORM;
> +
> +		poll_wait(file, &map->passive.inflight_accept_req, wait);
> +		return 0;
> +	}
> +
> +	if (test_and_clear_bit(PVCALLS_FLAG_POLL_RET,
> +			       (void *)&map->passive.flags))
> +		return POLLIN | POLLRDNORM;
> +
> +	/*
> +	 * First check RET, then INFLIGHT. No barriers necessary to
> +	 * ensure execution ordering because of the conditional
> +	 * instructions creating control dependencies.
> +	 */

IAC, these test_and_{clear,set}_bit() are "fully ordered".

  Andrea


> +
> +	if (test_and_set_bit(PVCALLS_FLAG_POLL_INFLIGHT,
> +			     (void *)&map->passive.flags)) {
> +		poll_wait(file, &bedata->inflight_req, wait);
> +		return 0;
> +	}
> +
> +	spin_lock(&bedata->socket_lock);
> +	ret = get_request(bedata, &req_id);
> +	if (ret < 0) {
> +		spin_unlock(&bedata->socket_lock);
> +		return ret;
> +	}
> +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> +	req->req_id = req_id;
> +	req->cmd = PVCALLS_POLL;
> +	req->u.poll.id = (uint64_t) map;
> +
> +	bedata->ring.req_prod_pvt++;
> +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> +	spin_unlock(&bedata->socket_lock);
> +	if (notify)
> +		notify_remote_via_irq(bedata->irq);
> +
> +	poll_wait(file, &bedata->inflight_req, wait);
> +	return 0;
> +}
> +
> +static unsigned int pvcalls_front_poll_active(struct file *file,
> +					      struct pvcalls_bedata *bedata,
> +					      struct sock_mapping *map,
> +					      poll_table *wait)
> +{
> +	unsigned int mask = 0;
> +	int32_t in_error, out_error;
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +
> +	out_error = intf->out_error;
> +	in_error = intf->in_error;
> +
> +	poll_wait(file, &map->active.inflight_conn_req, wait);
> +	if (pvcalls_front_write_todo(map))
> +		mask |= POLLOUT | POLLWRNORM;
> +	if (pvcalls_front_read_todo(map))
> +		mask |= POLLIN | POLLRDNORM;
> +	if (in_error != 0 || out_error != 0)
> +		mask |= POLLERR;
> +
> +	return mask;
> +}
> +
> +unsigned int pvcalls_front_poll(struct file *file, struct socket *sock,
> +			       poll_table *wait)
> +{
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map;
> +	int ret;
> +
> +	pvcalls_enter;
> +	if (!pvcalls_front_dev) {
> +		pvcalls_exit;
> +		return POLLNVAL;
> +	}
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> +	if (!map) {
> +		pvcalls_exit;
> +		return POLLNVAL;
> +	}
> +	if (map->active_socket)
> +		ret = pvcalls_front_poll_active(file, bedata, map, wait);
> +	else
> +		ret = pvcalls_front_poll_passive(file, bedata, map, wait);
> +	pvcalls_exit;
> +	return ret;
> +}
> +
>  static const struct xenbus_device_id pvcalls_front_ids[] = {
>  	{ "pvcalls" },
>  	{ "" }
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> index de24041..25e05b8 100644
> --- a/drivers/xen/pvcalls-front.h
> +++ b/drivers/xen/pvcalls-front.h
> @@ -20,5 +20,8 @@ int pvcalls_front_recvmsg(struct socket *sock,
>  			  struct msghdr *msg,
>  			  size_t len,
>  			  int flags);
> +unsigned int pvcalls_front_poll(struct file *file,
> +				struct socket *sock,
> +				poll_table *wait);
>  
>  #endif
> -- 
> 1.9.1
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 11/13] xen/pvcalls: implement poll command

[Boris Ostrovsky]

>  
> +static unsigned int pvcalls_front_poll_passive(struct file *file,
> +					       struct pvcalls_bedata *bedata,
> +					       struct sock_mapping *map,
> +					       poll_table *wait)
> +{
> +	int notify, req_id, ret;
> +	struct xen_pvcalls_request *req;
> +
> +	if (test_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> +		     (void *)&map->passive.flags)) {
> +		uint32_t req_id = READ_ONCE(map->passive.inflight_req_id);
> +
> +		if (req_id != PVCALLS_INVALID_ID &&
> +		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id)
> +			return POLLIN | POLLRDNORM;


Do we need to clear PVCALLS_FLAG_ACCEPT_INFLIGHT? Or do we expect a
(subsequent?) accept() to do that?

-boris



> +
> +		poll_wait(file, &map->passive.inflight_accept_req, wait);
> +		return 0;
> +	}
> +


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 11/13] xen/pvcalls: implement poll command

[Stefano Stabellini]

On Tue, 19 Sep 2017, Andrea Parri wrote:
> Hi Stefano,
> 
> On Fri, Sep 15, 2017 at 04:00:38PM -0700, Stefano Stabellini wrote:
> > For active sockets, check the indexes and use the inflight_conn_req
> > waitqueue to wait.
> > 
> > For passive sockets if an accept is outstanding
> > (PVCALLS_FLAG_ACCEPT_INFLIGHT), check if it has been answered by looking
> > at bedata->rsp[req_id]. If so, return POLLIN.  Otherwise use the
> > inflight_accept_req waitqueue.
> > 
> > If no accepts are inflight, send PVCALLS_POLL to the backend. If we have
> > outstanding POLL requests awaiting for a response use the inflight_req
> > waitqueue: inflight_req is awaken when a new response is received; on
> > wakeup we check whether the POLL response is arrived by looking at the
> > PVCALLS_FLAG_POLL_RET flag. We set the flag from
> > pvcalls_front_event_handler, if the response was for a POLL command.
> > 
> > In pvcalls_front_event_handler, get the struct sock_mapping from the
> > poll id (we previously converted struct sock_mapping* to uint64_t and
> > used it as id).
> > 
> > Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> > CC: boris.ostrovsky@oracle.com
> > CC: jgross@suse.com
> > ---
> >  drivers/xen/pvcalls-front.c | 144 +++++++++++++++++++++++++++++++++++++++++---
> >  drivers/xen/pvcalls-front.h |   3 +
> >  2 files changed, 138 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> > index 01a5a69..8a90213 100644
> > --- a/drivers/xen/pvcalls-front.c
> > +++ b/drivers/xen/pvcalls-front.c
> > @@ -85,6 +85,8 @@ struct sock_mapping {
> >  		 * Only one poll operation can be inflight for a given socket.
> >  		 */
> >  #define PVCALLS_FLAG_ACCEPT_INFLIGHT 0
> > +#define PVCALLS_FLAG_POLL_INFLIGHT   1
> > +#define PVCALLS_FLAG_POLL_RET        2
> >  			uint8_t flags;
> >  			uint32_t inflight_req_id;
> >  			struct sock_mapping *accept_map;
> > @@ -155,15 +157,32 @@ static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
> >  		rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
> >  
> >  		req_id = rsp->req_id;
> > -		dst = (uint8_t *)&bedata->rsp[req_id] + sizeof(rsp->req_id);
> > -		src = (uint8_t *)rsp + sizeof(rsp->req_id);
> > -		memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> > -		/*
> > -		 * First copy the rest of the data, then req_id. It is
> > -		 * paired with the barrier when accessing bedata->rsp.
> > -		 */
> > -		smp_wmb();
> > -		WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> > +		if (rsp->cmd == PVCALLS_POLL) {
> > +			struct sock_mapping *map = (struct sock_mapping *)
> > +						   rsp->u.poll.id;
> > +
> > +			set_bit(PVCALLS_FLAG_POLL_RET,
> > +				(void *)&map->passive.flags);
> > +			/*
> > +			 * Set RET, then clear INFLIGHT. It pairs with
> > +			 * the checks at the beginning of
> > +			 * pvcalls_front_poll_passive.
> > +			 */
> > +			smp_wmb();
> 
> pvcalls_front_poll_passive() seems to first check RET, then INFLIGHT
> (no "crossing of mem. locations"): can you elaborate here?

Thank you for the review! It looks like you spotted to errors. I think
heree should be

  clear INFLIGHT
  smp_wmb()
  set RET

to pair properly.


> > +			clear_bit(PVCALLS_FLAG_POLL_INFLIGHT,
> > +				  (void *)&map->passive.flags);
> > +		} else {
> > +			dst = (uint8_t *)&bedata->rsp[req_id] +
> > +			      sizeof(rsp->req_id);
> > +			src = (uint8_t *)rsp + sizeof(rsp->req_id);
> > +			memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> > +			/*
> > +			 * First copy the rest of the data, then req_id. It is
> > +			 * paired with the barrier when accessing bedata->rsp.
> > +			 */
> > +			smp_wmb();
> 
> Would you point me to the "pairing barrier"? (not sure I understand
> the logic here...)

On this side (pvcalls_front_event_handler):
    write content
    smp_wmb
    write id

On the other side (all command functions, for example pvcalls_front_socket)
    read id (passed to wait_event)
    smp_rmb() <--- this is missing and should pair with the above smp_wmb
    read content
    smp_mb() (*)
    clear id
 
(*) this is unnecessary and has no pairing, it was supposed to protect
against the content being overwritten before the read is complete,
because after clearing the id the slot could be reused. get_request
returns an id, but the content is not overwritten immediately. The id is
passed to the backend, and only upon receiving an answer the content
gets overwritten. I think it is unnecessary and I could remove it or
turn it into a compiler barrier.


> > +			WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> 
> Could this be rewritten as
> 
>    WRITE_ONCE(bedata->rsp[req_id].req_id, req_id);
 
Yes, I'll change it

 
> > +		}
> >  
> >  		done = 1;
> >  		bedata->ring.rsp_cons++;

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 11/13] xen/pvcalls: implement poll command

[Stefano Stabellini]

On Fri, 22 Sep 2017, Boris Ostrovsky wrote:
> > +static unsigned int pvcalls_front_poll_passive(struct file *file,
> > +					       struct pvcalls_bedata *bedata,
> > +					       struct sock_mapping *map,
> > +					       poll_table *wait)
> > +{
> > +	int notify, req_id, ret;
> > +	struct xen_pvcalls_request *req;
> > +
> > +	if (test_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> > +		     (void *)&map->passive.flags)) {
> > +		uint32_t req_id = READ_ONCE(map->passive.inflight_req_id);
> > +
> > +		if (req_id != PVCALLS_INVALID_ID &&
> > +		    READ_ONCE(bedata->rsp[req_id].req_id) == req_id)
> > +			return POLLIN | POLLRDNORM;
> 
> 
> Do we need to clear PVCALLS_FLAG_ACCEPT_INFLIGHT? Or do we expect a
> (subsequent?) accept() to do that?

No need to clear, here we only need to say whether there is data to read
or not. Subsequent accept calls will clear PVCALLS_FLAG_ACCEPT_INFLIGHT.

 
> > +
> > +		poll_wait(file, &map->passive.inflight_accept_req, wait);
> > +		return 0;
> > +	}
> > +
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Boris Ostrovsky]

> +
> +struct pvcalls_bedata {
> +	struct xen_pvcalls_front_ring ring;
> +	grant_ref_t ref;
> +	int irq;
> +
> +	struct list_head socket_mappings;
> +	struct list_head socketpass_mappings;
> +	spinlock_t socket_lock;
> +
> +	wait_queue_head_t inflight_req;
> +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
> +};
> +static struct xenbus_device *pvcalls_front_dev;
> +static atomic_t pvcalls_refcount;

Should the refcount be per back/frontend?

> +
> +/* first increment refcount, then proceed */
> +#define pvcalls_enter {                     \
> +	atomic_inc(&pvcalls_refcount);      \
> +	smp_mb();                           \
> +}
> +
> +/* first complete other operations, then decrement refcount */
> +#define pvcalls_exit {                      \
> +	smp_mb();                           \
> +	atomic_dec(&pvcalls_refcount);      \
> +}

I think atomic increment/decrement imply a barrier.


-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Boris Ostrovsky]

>  
>  static int pvcalls_front_remove(struct xenbus_device *dev)
>  {
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map = NULL, *n;
> +
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +	dev_set_drvdata(&dev->dev, NULL);
> +	pvcalls_front_dev = NULL;

One more comment on this patch: should this be the last thing to do?
pvcalls_front_dev is what prevents pvcalls_front_probe() from proceeding
and even though I am not sure a probe can be initiated while we are here
perhaps moving this to the end would make things slightly safer.

-boris


> +	if (bedata->irq >= 0)
> +		unbind_from_irqhandler(bedata->irq, dev);
> +
> +	smp_mb();
> +	while (atomic_read(&pvcalls_refcount) > 0)
> +		cpu_relax();
> +	list_for_each_entry_safe(map, n, &bedata->socket_mappings, list) {
> +		pvcalls_front_free_map(bedata, map);
> +		kfree(map);
> +	}
> +	list_for_each_entry_safe(map, n, &bedata->socketpass_mappings, list) {
> +		spin_lock(&bedata->socket_lock);
> +		list_del_init(&map->list);
> +		spin_unlock(&bedata->socket_lock);
> +		kfree(map);
> +	}
> +	if (bedata->ref >= 0)
> +		gnttab_end_foreign_access(bedata->ref, 0, 0);
> +	kfree(bedata->ring.sring);
> +	kfree(bedata);
> +	xenbus_switch_state(dev, XenbusStateClosed);
>  	return 0;
>  }
>  


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Stefano Stabellini]

On Wed, 20 Sep 2017, Boris Ostrovsky wrote:
> > +
> > +struct pvcalls_bedata {
> > +	struct xen_pvcalls_front_ring ring;
> > +	grant_ref_t ref;
> > +	int irq;
> > +
> > +	struct list_head socket_mappings;
> > +	struct list_head socketpass_mappings;
> > +	spinlock_t socket_lock;
> > +
> > +	wait_queue_head_t inflight_req;
> > +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
> > +};
> > +static struct xenbus_device *pvcalls_front_dev;
> > +static atomic_t pvcalls_refcount;
> 
> Should the refcount be per back/frontend?

Yes it is, but only one back/frontend connection is supported by the
frontend. I can add a comment.


> > +
> > +/* first increment refcount, then proceed */
> > +#define pvcalls_enter {                     \
> > +	atomic_inc(&pvcalls_refcount);      \
> > +	smp_mb();                           \
> > +}
> > +
> > +/* first complete other operations, then decrement refcount */
> > +#define pvcalls_exit {                      \
> > +	smp_mb();                           \
> > +	atomic_dec(&pvcalls_refcount);      \
> > +}
> 
> I think atomic increment/decrement imply a barrier.

You are right. From Documentation/core-api/atomic_ops.rst:

One very important aspect of these two routines is that they DO NOT
require any explicit memory barriers.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Boris Ostrovsky]

On 10/06/2017 01:51 PM, Stefano Stabellini wrote:
> On Wed, 20 Sep 2017, Boris Ostrovsky wrote:
>>> +
>>> +struct pvcalls_bedata {
>>> +	struct xen_pvcalls_front_ring ring;
>>> +	grant_ref_t ref;
>>> +	int irq;
>>> +
>>> +	struct list_head socket_mappings;
>>> +	struct list_head socketpass_mappings;
>>> +	spinlock_t socket_lock;
>>> +
>>> +	wait_queue_head_t inflight_req;
>>> +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
>>> +};
>>> +static struct xenbus_device *pvcalls_front_dev;
>>> +static atomic_t pvcalls_refcount;
>> Should the refcount be per back/frontend?
> Yes it is, but only one back/frontend connection is supported by the
> frontend. I can add a comment.

Since it's per backend connection --- shouldn't it be part of struct
pvcalls_bedata?

-boris



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Stefano Stabellini]

On Fri, 6 Oct 2017, Boris Ostrovsky wrote:
> On 10/06/2017 01:51 PM, Stefano Stabellini wrote:
> > On Wed, 20 Sep 2017, Boris Ostrovsky wrote:
> >>> +
> >>> +struct pvcalls_bedata {
> >>> +	struct xen_pvcalls_front_ring ring;
> >>> +	grant_ref_t ref;
> >>> +	int irq;
> >>> +
> >>> +	struct list_head socket_mappings;
> >>> +	struct list_head socketpass_mappings;
> >>> +	spinlock_t socket_lock;
> >>> +
> >>> +	wait_queue_head_t inflight_req;
> >>> +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
> >>> +};
> >>> +static struct xenbus_device *pvcalls_front_dev;
> >>> +static atomic_t pvcalls_refcount;
> >> Should the refcount be per back/frontend?
> > Yes it is, but only one back/frontend connection is supported by the
> > frontend. I can add a comment.
> 
> Since it's per backend connection --- shouldn't it be part of struct
> pvcalls_bedata?

struct pvcalls_bedata is allocated with kzalloc. To protect accesses to
it, pvcalls_refcount needs to be outside of it.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Boris Ostrovsky]

On 10/06/2017 04:29 PM, Stefano Stabellini wrote:
> On Fri, 6 Oct 2017, Boris Ostrovsky wrote:
>> On 10/06/2017 01:51 PM, Stefano Stabellini wrote:
>>> On Wed, 20 Sep 2017, Boris Ostrovsky wrote:
>>>>> +
>>>>> +struct pvcalls_bedata {
>>>>> +	struct xen_pvcalls_front_ring ring;
>>>>> +	grant_ref_t ref;
>>>>> +	int irq;
>>>>> +
>>>>> +	struct list_head socket_mappings;
>>>>> +	struct list_head socketpass_mappings;
>>>>> +	spinlock_t socket_lock;
>>>>> +
>>>>> +	wait_queue_head_t inflight_req;
>>>>> +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
>>>>> +};
>>>>> +static struct xenbus_device *pvcalls_front_dev;
>>>>> +static atomic_t pvcalls_refcount;
>>>> Should the refcount be per back/frontend?
>>> Yes it is, but only one back/frontend connection is supported by the
>>> frontend. I can add a comment.
>> Since it's per backend connection --- shouldn't it be part of struct
>> pvcalls_bedata?
> struct pvcalls_bedata is allocated with kzalloc. To protect accesses to
> it, pvcalls_refcount needs to be outside of it.

Oh, yes, of course. I think you also might be accessing it after the
struct is freed. Nevermind then.

-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 02/13] xen/pvcalls: implement frontend disconnect

[Stefano Stabellini]

On Wed, 20 Sep 2017, Boris Ostrovsky wrote:
> >  static int pvcalls_front_remove(struct xenbus_device *dev)
> >  {
> > +	struct pvcalls_bedata *bedata;
> > +	struct sock_mapping *map = NULL, *n;
> > +
> > +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> > +	dev_set_drvdata(&dev->dev, NULL);
> > +	pvcalls_front_dev = NULL;
> 
> One more comment on this patch: should this be the last thing to do?
> pvcalls_front_dev is what prevents pvcalls_front_probe() from proceeding
> and even though I am not sure a probe can be initiated while we are here
> perhaps moving this to the end would make things slightly safer.

pvcalls_front_dev = NULL is set early to prevent most other functions
(connect, listen, etc) from proceeding.

On the other end, pvcalls_front_probe can continue safely in parallel
with pvcalls_front_remove to add a new frontend-backend connection
(which is not supported today anyway). pvcalls_front_probe would be
called with a different xenbus_device parameter.


> > +	if (bedata->irq >= 0)
> > +		unbind_from_irqhandler(bedata->irq, dev);
> > +
> > +	smp_mb();
> > +	while (atomic_read(&pvcalls_refcount) > 0)
> > +		cpu_relax();
> > +	list_for_each_entry_safe(map, n, &bedata->socket_mappings, list) {
> > +		pvcalls_front_free_map(bedata, map);
> > +		kfree(map);
> > +	}
> > +	list_for_each_entry_safe(map, n, &bedata->socketpass_mappings, list) {
> > +		spin_lock(&bedata->socket_lock);
> > +		list_del_init(&map->list);
> > +		spin_unlock(&bedata->socket_lock);
> > +		kfree(map);
> > +	}
> > +	if (bedata->ref >= 0)
> > +		gnttab_end_foreign_access(bedata->ref, 0, 0);
> > +	kfree(bedata->ring.sring);
> > +	kfree(bedata);
> > +	xenbus_switch_state(dev, XenbusStateClosed);
> >  	return 0;
> >  }
> >  
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 09/13] xen/pvcalls: implement sendmsg

[Boris Ostrovsky]

> +static bool pvcalls_front_write_todo(struct sock_mapping *map)
> +{
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +	RING_IDX cons, prod, size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
> +	int32_t error;
> +
> +	cons = intf->out_cons;
> +	prod = intf->out_prod;
> +	error = intf->out_error;
> +	if (error == -ENOTCONN)
> +		return false;
> +	if (error != 0)
> +		return true;

Just like below, error processing can be moved up.

> +	return !!(size - pvcalls_queued(prod, cons, size));
> +}
> +
>  static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>  {
>  	struct xenbus_device *dev = dev_id;
> @@ -363,6 +380,108 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
>  	return ret;
>  }
>  
> +static int __write_ring(struct pvcalls_data_intf *intf,
> +			struct pvcalls_data *data,
> +			struct iov_iter *msg_iter,
> +			int len)
> +{
> +	RING_IDX cons, prod, size, masked_prod, masked_cons;
> +	RING_IDX array_size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
> +	int32_t error;
> +
> +	error = intf->out_error;
> +	if (error < 0)
> +		return error;
> +	cons = intf->out_cons;
> +	prod = intf->out_prod;
> +	/* read indexes before continuing */
> +	virt_mb();
> +
> +	size = pvcalls_queued(prod, cons, array_size);
> +	if (size >= array_size)
> +		return 0;


Is it possible to have size > array_size?


> +	if (len > array_size - size)
> +		len = array_size - size;
> +
> +	masked_prod = pvcalls_mask(prod, array_size);
> +	masked_cons = pvcalls_mask(cons, array_size);
> +
> +	if (masked_prod < masked_cons) {
> +		copy_from_iter(data->out + masked_prod, len, msg_iter);
> +	} else {
> +		if (len > array_size - masked_prod) {
> +			copy_from_iter(data->out + masked_prod,
> +				       array_size - masked_prod, msg_iter);
> +			copy_from_iter(data->out,
> +				       len - (array_size - masked_prod),
> +				       msg_iter);
> +		} else {
> +			copy_from_iter(data->out + masked_prod, len, msg_iter);
> +		}
> +	}
> +	/* write to ring before updating pointer */
> +	virt_wmb();
> +	intf->out_prod += len;
> +
> +	return len;


I know that you said you'd be changing len's type to int but now that I
am looking at it I wonder whether you could pass len as a 'size_t *' and
have this routine return error code (i.e. <=0).

OTOH, we'd be mixing up types again since RING_IDX is an unsigned int.

So I'll leave it to you (or anyone else reviewing this) to decide which
way is better.


> +}
> +
> +int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
> +			  size_t len)

Also, the signature here looks suspicious --- you are trying to send
'size_t len' bytes but returning an int, which is how many bytes you've
actually sent. Right?


-boris


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 09/13] xen/pvcalls: implement sendmsg

[Stefano Stabellini]

On Fri, 22 Sep 2017, Boris Ostrovsky wrote:
> > +static bool pvcalls_front_write_todo(struct sock_mapping *map)
> > +{
> > +	struct pvcalls_data_intf *intf = map->active.ring;
> > +	RING_IDX cons, prod, size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
> > +	int32_t error;
> > +
> > +	cons = intf->out_cons;
> > +	prod = intf->out_prod;
> > +	error = intf->out_error;
> > +	if (error == -ENOTCONN)
> > +		return false;
> > +	if (error != 0)
> > +		return true;
> 
> Just like below, error processing can be moved up.

OK


> > +	return !!(size - pvcalls_queued(prod, cons, size));
> > +}
> > +
> >  static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
> >  {
> >  	struct xenbus_device *dev = dev_id;
> > @@ -363,6 +380,108 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
> >  	return ret;
> >  }
> >  
> > +static int __write_ring(struct pvcalls_data_intf *intf,
> > +			struct pvcalls_data *data,
> > +			struct iov_iter *msg_iter,
> > +			int len)
> > +{
> > +	RING_IDX cons, prod, size, masked_prod, masked_cons;
> > +	RING_IDX array_size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
> > +	int32_t error;
> > +
> > +	error = intf->out_error;
> > +	if (error < 0)
> > +		return error;
> > +	cons = intf->out_cons;
> > +	prod = intf->out_prod;
> > +	/* read indexes before continuing */
> > +	virt_mb();
> > +
> > +	size = pvcalls_queued(prod, cons, array_size);
> > +	if (size >= array_size)
> > +		return 0;
> 
> 
> Is it possible to have size > array_size?

Yes, if somebody makes a mistake in writing to prod. Of course, it is
not valid. I guess I could return error instead of 0.


> > +	if (len > array_size - size)
> > +		len = array_size - size;
> > +
> > +	masked_prod = pvcalls_mask(prod, array_size);
> > +	masked_cons = pvcalls_mask(cons, array_size);
> > +
> > +	if (masked_prod < masked_cons) {
> > +		copy_from_iter(data->out + masked_prod, len, msg_iter);
> > +	} else {
> > +		if (len > array_size - masked_prod) {
> > +			copy_from_iter(data->out + masked_prod,
> > +				       array_size - masked_prod, msg_iter);
> > +			copy_from_iter(data->out,
> > +				       len - (array_size - masked_prod),
> > +				       msg_iter);
> > +		} else {
> > +			copy_from_iter(data->out + masked_prod, len, msg_iter);
> > +		}
> > +	}
> > +	/* write to ring before updating pointer */
> > +	virt_wmb();
> > +	intf->out_prod += len;
> > +
> > +	return len;
> 
> 
> I know that you said you'd be changing len's type to int but now that I
> am looking at it I wonder whether you could pass len as a 'size_t *' and
> have this routine return error code (i.e. <=0).
> 
> OTOH, we'd be mixing up types again since RING_IDX is an unsigned int.
> 
> So I'll leave it to you (or anyone else reviewing this) to decide which
> way is better.

see below

> > +}
> > +
> > +int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
> > +			  size_t len)
> 
> Also, the signature here looks suspicious --- you are trying to send
> 'size_t len' bytes but returning an int, which is how many bytes you've
> actually sent. Right?

Yes, but it is OK because it is limited by the size of the array which
is far smaller than INT_MAX (the array size is 262144). This is also why
I would just keep len as int.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 10/13] xen/pvcalls: implement recvmsg

[Boris Ostrovsky]

>  
> +static bool pvcalls_front_read_todo(struct sock_mapping *map)
> +{
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +	RING_IDX cons, prod;
> +	int32_t error;
> +
> +	cons = intf->in_cons;
> +	prod = intf->in_prod;
> +	error = intf->in_error;
> +	return (error != 0 ||
> +		pvcalls_queued(prod, cons,
> +			       XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER)) != 0);


Does this routine have to be different from pvcalls_front_write_todo()?
They look pretty similar. Can they be merged?

(and you don't really need 'error' variable)

-boris

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 10/13] xen/pvcalls: implement recvmsg

[Stefano Stabellini]

On Fri, 22 Sep 2017, Boris Ostrovsky wrote:
> > +static bool pvcalls_front_read_todo(struct sock_mapping *map)
> > +{
> > +	struct pvcalls_data_intf *intf = map->active.ring;
> > +	RING_IDX cons, prod;
> > +	int32_t error;
> > +
> > +	cons = intf->in_cons;
> > +	prod = intf->in_prod;
> > +	error = intf->in_error;
> > +	return (error != 0 ||
> > +		pvcalls_queued(prod, cons,
> > +			       XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER)) != 0);
> 
> 
> Does this routine have to be different from pvcalls_front_write_todo()?
> They look pretty similar. Can they be merged?
> 
> (and you don't really need 'error' variable)

pvcalls_front_write_todo and pvcalls_front_read_todo are both small
wrappers around pvcalls_queued. However, they check different indexes.
A single function would look like this:

  static bool pvcalls_front_todo(struct sock_mapping *map, bool write)
  {
  	struct pvcalls_data_intf *intf = map->active.ring;
  	RING_IDX cons, prod, size = XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
  	int32_t error;
  	RING_IDX q;
  	bool ret;
  
  	if (write) {
  		cons = intf->out_cons;
  		prod = intf->out_prod;
  		error = intf->out_error;
  	} else {
  		cons = intf->in_cons;
  		prod = intf->in_prod;
  		error = intf->in_error;
  	}
  	if (error == -ENOTCONN)
  		return false;
  	if (error != 0)
  		return true;
  
  	q = pvcalls_queued(prod, cons, size);
  	if (write)
  		ret = !!(size - q);
  	else
  		ret = q != 0;
  	return ret;
  }

I don't think is much of an improvement?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 12/13] xen/pvcalls: implement release command

[Boris Ostrovsky]

>  
> +static void pvcalls_front_free_map(struct pvcalls_bedata *bedata,
> +				   struct sock_mapping *map)

I just noticed: pvcalls_front_free_map() is referenced by patches 2 and 8.

> +{
> +	int i;
> +
> +	unbind_from_irqhandler(map->active.irq, map);
> +
> +	spin_lock(&bedata->socket_lock);
> +	if (!list_empty(&map->list))
> +		list_del_init(&map->list);
> +	spin_unlock(&bedata->socket_lock);
> +
> +	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
> +		gnttab_end_foreign_access(map->active.ring->ref[i], 0, 0);
> +	gnttab_end_foreign_access(map->active.ref, 0, 0);
> +	free_page((unsigned long)map->active.ring);
> +}
> +
>  int pvcalls_front_socket(struct socket *sock)
>  {
>  	struct pvcalls_bedata *bedata;
> @@ -960,6 +978,92 @@ unsigned int pvcalls_front_poll(struct file *file, struct socket *sock,
>  	return ret;
>  }
>  
> +int pvcalls_front_release(struct socket *sock)
> +{
> +	struct pvcalls_bedata *bedata;
> +	struct sock_mapping *map;
> +	int req_id, notify, ret;
> +	struct xen_pvcalls_request *req;
> +
> +	pvcalls_enter;
> +	if (!pvcalls_front_dev) {
> +		pvcalls_exit;
> +		return -EIO;
> +	}
> +	if (sock->sk == NULL) {
> +		pvcalls_exit;
> +		return 0;
> +	}
> +
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> +	if (map == NULL) {
> +		pvcalls_exit;
> +		return 0;
> +	}
> +
> +	spin_lock(&bedata->socket_lock);
> +	ret = get_request(bedata, &req_id);
> +	if (ret < 0) {
> +		spin_unlock(&bedata->socket_lock);
> +		pvcalls_exit;
> +		return ret;
> +	}
> +	sock->sk->sk_send_head = NULL;
> +
> +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> +	req->req_id = req_id;
> +	req->cmd = PVCALLS_RELEASE;
> +	req->u.release.id = (uint64_t)map;
> +
> +	bedata->ring.req_prod_pvt++;
> +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> +	spin_unlock(&bedata->socket_lock);
> +	if (notify)
> +		notify_remote_via_irq(bedata->irq);
> +
> +	wait_event(bedata->inflight_req,
> +		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
> +
> +	if (map->active_socket) {
> +		/*
> +		 * Set in_error and wake up inflight_conn_req to force
> +		 * recvmsg waiters to exit.
> +		 */
> +		map->active.ring->in_error = -EBADF;
> +		wake_up_interruptible(&map->active.inflight_conn_req);
> +
> +		/*
> +		 * Wait until there are no more waiters on the mutexes.
> +		 * We know that no new waiters can be added because sk_send_head
> +		 * is set to NULL -- we only need to wait for the existing
> +		 * waiters to return.
> +		 */
> +		while (!mutex_trylock(&map->active.in_mutex) ||
> +			   !mutex_trylock(&map->active.out_mutex))
> +			cpu_relax();


What if you manage to grab the locks before waiters get to run? for
example, in recvmsg:

	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
		wait_event_interruptible(map->active.inflight_conn_req,
					 pvcalls_front_read_todo(map));
	}
	ret = __read_ring(map->active.ring, &map->active.data,
			  &msg->msg_iter, len, flags);

map will be freed (by pvcalls_front_free_map() below) before __read_ring
is passed the just-freed ring.


> +
> +		pvcalls_front_free_map(bedata, map);
> +		kfree(map);


-boris



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 12/13] xen/pvcalls: implement release command

[Boris Ostrovsky]

>> +		 */
>> +		map->active.ring->in_error = -EBADF;
>> +		wake_up_interruptible(&map->active.inflight_conn_req);
>> +
>> +		/*
>> +		 * Wait until there are no more waiters on the mutexes.
>> +		 * We know that no new waiters can be added because sk_send_head
>> +		 * is set to NULL -- we only need to wait for the existing
>> +		 * waiters to return.
>> +		 */
>> +		while (!mutex_trylock(&map->active.in_mutex) ||
>> +			   !mutex_trylock(&map->active.out_mutex))
>> +			cpu_relax();
>
> What if you manage to grab the locks before waiters get to run? for
> example, in recvmsg:
>
> 	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
> 		wait_event_interruptible(map->active.inflight_conn_req,
> 					 pvcalls_front_read_todo(map));
> 	}
> 	ret = __read_ring(map->active.ring, &map->active.data,
> 			  &msg->msg_iter, len, flags);
>
> map will be freed (by pvcalls_front_free_map() below) before __read_ring
> is passed the just-freed ring.

Actually, since you don't drop the locks I am not sure recvmsg side will
even get there.

-boris

>
>
>> +
>> +		pvcalls_front_free_map(bedata, map);
>> +		kfree(map);
>
> -boris
>
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v4 12/13] xen/pvcalls: implement release command

[Stefano Stabellini]

On Fri, 22 Sep 2017, Boris Ostrovsky wrote:
> > +static void pvcalls_front_free_map(struct pvcalls_bedata *bedata,
> > +				   struct sock_mapping *map)
> 
> I just noticed: pvcalls_front_free_map() is referenced by patches 2 and 8.

I'll create an empty stub earlier.


> > +{
> > +	int i;
> > +
> > +	unbind_from_irqhandler(map->active.irq, map);
> > +
> > +	spin_lock(&bedata->socket_lock);
> > +	if (!list_empty(&map->list))
> > +		list_del_init(&map->list);
> > +	spin_unlock(&bedata->socket_lock);
> > +
> > +	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
> > +		gnttab_end_foreign_access(map->active.ring->ref[i], 0, 0);
> > +	gnttab_end_foreign_access(map->active.ref, 0, 0);
> > +	free_page((unsigned long)map->active.ring);
> > +}
> > +
> >  int pvcalls_front_socket(struct socket *sock)
> >  {
> >  	struct pvcalls_bedata *bedata;
> > @@ -960,6 +978,92 @@ unsigned int pvcalls_front_poll(struct file *file, struct socket *sock,
> >  	return ret;
> >  }
> >  
> > +int pvcalls_front_release(struct socket *sock)
> > +{
> > +	struct pvcalls_bedata *bedata;
> > +	struct sock_mapping *map;
> > +	int req_id, notify, ret;
> > +	struct xen_pvcalls_request *req;
> > +
> > +	pvcalls_enter;
> > +	if (!pvcalls_front_dev) {
> > +		pvcalls_exit;
> > +		return -EIO;
> > +	}
> > +	if (sock->sk == NULL) {
> > +		pvcalls_exit;
> > +		return 0;
> > +	}
> > +
> > +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> > +
> > +	map = (struct sock_mapping *) sock->sk->sk_send_head;
> > +	if (map == NULL) {
> > +		pvcalls_exit;
> > +		return 0;
> > +	}
> > +
> > +	spin_lock(&bedata->socket_lock);
> > +	ret = get_request(bedata, &req_id);
> > +	if (ret < 0) {
> > +		spin_unlock(&bedata->socket_lock);
> > +		pvcalls_exit;
> > +		return ret;
> > +	}
> > +	sock->sk->sk_send_head = NULL;
> > +
> > +	req = RING_GET_REQUEST(&bedata->ring, req_id);
> > +	req->req_id = req_id;
> > +	req->cmd = PVCALLS_RELEASE;
> > +	req->u.release.id = (uint64_t)map;
> > +
> > +	bedata->ring.req_prod_pvt++;
> > +	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> > +	spin_unlock(&bedata->socket_lock);
> > +	if (notify)
> > +		notify_remote_via_irq(bedata->irq);
> > +
> > +	wait_event(bedata->inflight_req,
> > +		   READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
> > +
> > +	if (map->active_socket) {
> > +		/*
> > +		 * Set in_error and wake up inflight_conn_req to force
> > +		 * recvmsg waiters to exit.
> > +		 */
> > +		map->active.ring->in_error = -EBADF;
> > +		wake_up_interruptible(&map->active.inflight_conn_req);
> > +
> > +		/*
> > +		 * Wait until there are no more waiters on the mutexes.
> > +		 * We know that no new waiters can be added because sk_send_head
> > +		 * is set to NULL -- we only need to wait for the existing
> > +		 * waiters to return.
> > +		 */
> > +		while (!mutex_trylock(&map->active.in_mutex) ||
> > +			   !mutex_trylock(&map->active.out_mutex))
> > +			cpu_relax();
> 
> 
> What if you manage to grab the locks before waiters get to run? for
> example, in recvmsg:
> 
> 	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
> 		wait_event_interruptible(map->active.inflight_conn_req,
> 					 pvcalls_front_read_todo(map));
> 	}
> 	ret = __read_ring(map->active.ring, &map->active.data,
> 			  &msg->msg_iter, len, flags);
> 
> map will be freed (by pvcalls_front_free_map() below) before __read_ring
> is passed the just-freed ring.

I don't think that is possible: mutex_trylock should return 0 on
contention. I don't think is possible for mutex_trylock to return 1 when
there are waiters waiting for their chance to run.



 
> > +
> > +		pvcalls_front_free_map(bedata, map);
> > +		kfree(map);
> 
> 
> -boris
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel