* [PATCH v9 01/16] docs: create Memory Bandwidth Allocation (MBA) feature document
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general Yi Sun
` (15 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Yi Sun, Konrad Rzeszutek Wilk, Andrew Cooper, Ian Jackson,
Julien Grall, Jan Beulich, Chao Peng, Wei Liu, Daniel De Graaf,
Roger Pau Monné
This patch creates MBA feature document in doc/features/. It describes
key points to implement MBA which is described in details in Intel SDM
"Introduction to Memory Bandwidth Allocation".
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Daniel De Graaf <dgdegra@tycho.nsa.gov>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
CC: Julien Grall <julien.grall@arm.com>
v6:
- fix some words.
(suggested by Roger Pau Monné)
v5:
- correct some words.
(suggested by Roger Pau Monné)
- change 'xl psr-mba-set 1 0xa' to 'xl psr-mba-set 1 10'.
(suggested by Roger Pau Monné)
v4:
- add 'domain-name' as parameter of 'psr-mba-show/psr-mba-set'.
(suggested by Roger Pau Monné)
- fix some wordings.
(suggested by Roger Pau Monné)
- explain how user can know the MBA_MAX.
(suggested by Roger Pau Monné)
- move the description of 'Linear mode/Non-linear mode' into section
of 'psr-mba-show'.
(suggested by Roger Pau Monné)
- change 'per-thread' to 'per-hyper-thread' to make it clearer.
(suggested by Roger Pau Monné)
- upgrade revision number.
v3:
- remove 'closed-loop' related description.
(suggested by Roger Pau Monné)
- explain 'linear' and 'non-linear' before mentioning them.
(suggested by Roger Pau Monné)
- adjust desription of 'psr-mba-set'.
(suggested by Roger Pau Monné)
- explain 'MBA_MAX'.
(suggested by Roger Pau Monné)
- remove 'n<64'.
(suggested by Roger Pau Monné)
- fix some wordings.
(suggested by Roger Pau Monné)
- add context in 'Testing' part to make things more clear.
(suggested by Roger Pau Monné)
v2:
- declare 'HW' in Terminology.
(suggested by Chao Peng)
- replace 'COS ID of VCPU' to 'COS ID of domain'.
(suggested by Chao Peng)
- replace 'COS register' to 'Thrtl MSR'.
(suggested by Chao Peng)
- add description for 'psr-mba-show' to state that the decimal value is
shown for linear mode but hexadecimal value is shown for non-linear mode.
(suggested by Chao Peng)
- remove content in 'Areas for improvement'.
(suggested by Chao Peng)
- use '<>' to specify mandatory argument to a command.
(suggested by Wei Liu)
v1:
- remove a special character to avoid the error when building pandoc.
---
docs/features/intel_psr_mba.pandoc | 297 +++++++++++++++++++++++++++++++++++++
1 file changed, 297 insertions(+)
create mode 100644 docs/features/intel_psr_mba.pandoc
diff --git a/docs/features/intel_psr_mba.pandoc b/docs/features/intel_psr_mba.pandoc
new file mode 100644
index 0000000..86df661
--- /dev/null
+++ b/docs/features/intel_psr_mba.pandoc
@@ -0,0 +1,297 @@
+% Intel Memory Bandwidth Allocation (MBA) Feature
+% Revision 1.8
+
+\clearpage
+
+# Basics
+
+---------------- ----------------------------------------------------
+ Status: **Tech Preview**
+
+Architecture(s): Intel x86
+
+ Component(s): Hypervisor, toolstack
+
+ Hardware: MBA is supported on Skylake Server and beyond
+---------------- ----------------------------------------------------
+
+# Terminology
+
+* CAT Cache Allocation Technology
+* CBM Capacity BitMasks
+* CDP Code and Data Prioritization
+* COS/CLOS Class of Service
+* HW Hardware
+* MBA Memory Bandwidth Allocation
+* MSRs Machine Specific Registers
+* PSR Intel Platform Shared Resource
+* THRTL Throttle value or delay value
+
+# Overview
+
+The Memory Bandwidth Allocation (MBA) feature provides indirect and approximate
+control over memory bandwidth available per-core. This feature provides OS/
+hypervisor the ability to slow misbehaving apps/domains by using a credit-based
+throttling mechanism.
+
+# User details
+
+* Feature Enabling:
+
+ Add "psr=mba" to boot line parameter to enable MBA feature.
+
+* xl interfaces:
+
+ 1. `psr-mba-show [domain-id|domain-name]`:
+
+ Show memory bandwidth throttling for domain. Under different modes, it
+ shows different type of data.
+
+ There are two modes:
+ Linear mode: the input precision is defined as 100-(MBA_MAX). For instance,
+ if the MBA_MAX value is 90, the input precision is 10%. Values not an even
+ multiple of the precision (e.g., 12%) will be rounded down (e.g., to 10%
+ delay applied) by HW automatically. The response of throttling value is
+ linear.
+
+ Non-linear mode: input delay values are powers-of-two from zero to the
+ MBA_MAX value from CPUID. In this case any values not a power of two will
+ be rounded down the next nearest power of two by HW automatically. The
+ response of throttling value is non-linear.
+
+ For linear mode, it shows the decimal value. For non-linear mode, it shows
+ hexadecimal value.
+
+ 2. `psr-mba-set [OPTIONS] <domain-id|domain-name> <throttling>`:
+
+ Set memory bandwidth throttling for domain.
+
+ Options:
+ '-s': Specify the socket to process, otherwise all sockets are processed.
+
+ Throttling value set in register implies the approximate amount of delaying
+ the traffic between core and memory. Higher throttling value result in
+ lower bandwidth. The max throttling value (MBA_MAX) supported can be
+ obtained through CPUID inside hypervisor. Users can fetch the MBA_MAX value
+ using the `psr-hwinfo` xl command.
+
+# Technical details
+
+MBA is a member of Intel PSR features, it shares the base PSR infrastructure
+in Xen.
+
+## Hardware perspective
+
+ MBA defines a range of MSRs to support specifying a delay value (Thrtl) per
+ COS, with details below.
+
+ ```
+ +----------------------------+----------------+
+ | MSR (per socket) | Address |
+ +----------------------------+----------------+
+ | IA32_L2_QOS_Ext_BW_Thrtl_0 | 0xD50 |
+ +----------------------------+----------------+
+ | ... | ... |
+ +----------------------------+----------------+
+ | IA32_L2_QOS_Ext_BW_Thrtl_n | 0xD50+n |
+ +----------------------------+----------------+
+ ```
+
+ When context switch happens, the COS ID of domain is written to per-hyper-
+ thread MSR `IA32_PQR_ASSOC`, and then hardware enforces bandwidth allocation
+ according to the throttling value stored in the Thrtl MSR register.
+
+## The relationship between MBA and CAT/CDP
+
+ Generally speaking, MBA is completely independent of CAT/CDP, and any
+ combination may be applied at any time, e.g. enabling MBA with CAT
+ disabled.
+
+ But it needs to be noticed that MBA shares COS infrastructure with CAT,
+ although MBA is enumerated by different CPUID leaf from CAT (which
+ indicates that the max COS of MBA may be different from CAT). In some
+ cases, a domain is permitted to have a COS that is beyond one (or more)
+ of PSR features but within the others. For instance, let's assume the max
+ COS of MBA is 8 but the max COS of L3 CAT is 16, when a domain is assigned
+ 9 as COS, the L3 CAT CBM associated to COS 9 would be enforced, but for MBA,
+ the HW works as default value is set since COS 9 is beyond the max COS (8)
+ of MBA.
+
+## Design Overview
+
+* Core COS/Thrtl association
+
+ When enforcing Memory Bandwidth Allocation, all cores of domains have
+ the same default Thrtl MSR (COS0) which stores the same Thrtl (0). The
+ default Thrtl MSR is used only in hypervisor and is transparent to tool stack
+ and user.
+
+ System administrators can change PSR allocation policy at runtime by
+ using the tool stack. Since MBA shares COS ID with CAT/CDP, a COS ID
+ corresponds to a 2-tuple, like [CBM, Thrtl] with only-CAT enabled, when CDP
+ is enabled, the COS ID corresponds to a 3-tuple, like [Code_CBM, Data_CBM,
+ Thrtl]. If neither CAT nor CDP is enabled, things are easier, since one COS
+ ID corresponds to one Thrtl.
+
+* VCPU schedule
+
+ This part reuses CAT COS infrastructure.
+
+* Multi-sockets
+
+ Different sockets may have different MBA capabilities (like max COS)
+ although it is consistent on the same socket. So the capability
+ of per-socket MBA is specified.
+
+ This part reuses CAT COS infrastructure.
+
+## Implementation Description
+
+* Hypervisor interfaces:
+
+ 1. Boot line param: "psr=mba" to enable the feature.
+
+ 2. SYSCTL:
+ - XEN_SYSCTL_PSR_MBA_get_info: Get system MBA information.
+
+ 3. DOMCTL:
+ - XEN_DOMCTL_PSR_MBA_OP_GET_THRTL: Get throttling for a domain.
+ - XEN_DOMCTL_PSR_MBA_OP_SET_THRTL: Set throttling for a domain.
+
+* xl interfaces:
+
+ 1. psr-mba-show [domain-id]
+ Show system/domain runtime MBA throttling value. For linear mode,
+ it shows the decimal value. For non-linear mode, it shows hexadecimal
+ value.
+ => XEN_SYSCTL_PSR_MBA_get_info/XEN_DOMCTL_PSR_MBA_OP_GET_THRTL
+
+ 2. psr-mba-set [OPTIONS] <domain-id> <throttling>
+ Set bandwidth throttling for a domain.
+ => XEN_DOMCTL_PSR_MBA_OP_SET_THRTL
+
+ 3. psr-hwinfo
+ Show PSR HW information, including L3 CAT/CDP/L2 CAT/MBA.
+ => XEN_SYSCTL_PSR_MBA_get_info
+
+* Key data structure:
+
+ 1. Feature HW info
+
+ ```
+ struct {
+ unsigned int thrtl_max;
+ bool linear;
+ } mba;
+
+ - Member `thrtl_max`
+
+ `thrtl_max` is the max throttling value to be set, i.e. MBA_MAX.
+
+ - Member `linear`
+
+ `linear` means the response of delay value is linear or not.
+
+ As mentioned above, MBA is a member of Intel PSR features, it shares the
+ base PSR infrastructure in Xen. For example, the 'cos_max' is a common HW
+ property for all features. So, for other data structure details, please
+ refer to 'intel_psr_cat_cdp.pandoc'.
+
+# Limitations
+
+MBA can only work on HW which supports it (check CPUID).
+
+# Testing
+
+We can execute these commands to verify MBA on different HWs supporting them.
+
+For example:
+ 1. User can get the MBA hardware info through 'psr-hwinfo' command. From
+ result, user can know if this hardware works under linear mode or non-
+ linear mode, the max throttling value (MBA_MAX) and so on.
+
+ root@:~$ xl psr-hwinfo --mba
+ Memory Bandwidth Allocation (MBA):
+ Socket ID : 0
+ Linear Mode : Enabled
+ Maximum COS : 7
+ Maximum Throttling Value: 90
+ Default Throttling Value: 0
+
+ 2. Then, user can set a throttling value to a domain. For example, set '10',
+ i.e 10% delay.
+
+ root@:~$ xl psr-mba-set 1 10
+
+ 3. User can check the current configuration of the domain through
+ 'psr-mab-show'. For linear mode, the decimal value is shown.
+
+ root@:~$ xl psr-mba-show 1
+ Socket ID : 0
+ Default THRTL : 0
+ ID NAME THRTL
+ 1 ubuntu14 10
+
+# Areas for improvement
+
+N/A
+
+# Known issues
+
+N/A
+
+# References
+
+"INTEL RESOURCE DIRECTOR TECHNOLOGY (INTEL RDT) ALLOCATION FEATURES" [Intel 64 and IA-32 Architectures Software Developer Manuals, vol3](http://www.intel.com/content/www/us/en/processors/architectures-software-developer-manuals.html)
+
+# History
+
+------------------------------------------------------------------------
+Date Revision Version Notes
+---------- -------- -------- -------------------------------------------
+2017-01-10 1.0 Xen 4.9 Design document written
+2017-07-10 1.1 Xen 4.10 Changes:
+ 1. Modify data structure according to latest
+ codes;
+ 2. Add content for 'Areas for improvement';
+ 3. Other minor changes.
+2017-08-09 1.2 Xen 4.10 Changes:
+ 1. Remove a special character to avoid error when
+ building pandoc.
+2017-08-15 1.3 Xen 4.10 Changes:
+ 1. Add terminology 'HW'.
+ 2. Change 'COS ID of VCPU' to 'COS ID of domain'.
+ 3. Change 'COS register' to 'Thrtl MSR'.
+ 4. Explain the value shown for 'psr-mba-show' under
+ different modes.
+ 5. Remove content in 'Areas for improvement'.
+2017-08-16 1.4 Xen 4.10 Changes:
+ 1. Add '<>' for mandatory argument.
+2017-08-30 1.5 Xen 4.10 Changes:
+ 1. Modify words in 'Overview' to make it easier to
+ understand.
+ 2. Explain 'linear/non-linear' modes before mention
+ them.
+ 3. Explain throttling value more accurate.
+ 4. Explain 'MBA_MAX'.
+ 5. Correct some words in 'Design Overview'.
+ 6. Change 'mba_info' to 'mba' according to code
+ changes. Also, modify contents of it.
+ 7. Add context in 'Testing' part to make things
+ more clear.
+ 8. Remove 'n<64' to avoid out-of-sync.
+2017-09-21 1.6 Xen 4.10 Changes:
+ 1. Add 'domain-name' as parameter of 'psr-mba-show/
+ psr-mba-set'.
+ 2. Fix some wordings.
+ 3. Explain how user can know the MBA_MAX.
+ 4. Move the description of 'Linear mode/Non-linear
+ mode' into section of 'psr-mba-show'.
+ 5. Change 'per-thread' to 'per-hyper-thread'.
+2017-09-29 1.7 Xen 4.10 Changes:
+ 1. Correct some words.
+ 2. Change 'xl psr-mba-set 1 0xa' to
+ 'xl psr-mba-set 1 10'
+2017-10-08 1.8 Xen 4.10 Changes:
+ 1. Correct some words.
+---------- -------- -------- -------------------------------------------
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
2017-10-20 8:28 ` [PATCH v9 01/16] docs: create Memory Bandwidth Allocation (MBA) feature document Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-24 9:10 ` [PATCH v9.1 " Yi Sun
2017-10-20 8:28 ` [PATCH v9 03/16] x86: rename 'cbm_type' to 'psr_type' to make it general Yi Sun
` (14 subsequent siblings)
16 siblings, 1 reply; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Yi Sun, Andrew Cooper, Ian Jackson, Jan Beulich, Chao Peng,
Wei Liu, Daniel De Graaf, Roger Pau Monné
This patch renames PSR sysctl/domctl interfaces and related xsm policy to
make them be general for all resource allocation features but not only
for CAT. Then, we can resuse the interfaces for all allocation features.
Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
macros. E.g.:
1. psr_cat_op -> psr_alloc
2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Daniel De Graaf <dgdegra@tycho.nsa.gov>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v7:
- add single trailing underscore for internal variabled in macro.
(suggested by Jan Beulich)
- add parentheses for input parameters of marcro.
(suggested by Jan Beulich)
- adjust the postion of macro.
(suggested by Jan Beulich)
v6:
- move macro definition into the function and undefine it after use.
(suggested by Roger Pau Monné)
- do not bump sysctl version because it has been bumped for 4.10.
(suggested by Roger Pau Monné)
v5:
- remove domctl version number upgrade.
(suggested by Jan Beulich)
- restore 'XEN_SYSCTL_PSR_CAT_L3_CDP'.
(suggested by Jan Beulich)
- define a local macro to complete psr get value flow.
(suggested by Roger Pau Monné)
- remove 'Reviewed-by' and 'Acked-by'.
(suggested by Wei Liu)
v4:
- remove 'ALLOC_' from names.
(suggested by Roger Pau Monné)
- fix comments.
(suggested by Roger Pau Monné)
v3:
- remove 'op/OP' from names and modify some names from 'PSR_CAT' to
'PSR_ALLOC'.
(suggested by Roger Pau Monné)
v1:
- add description about what to be changed in commit message.
(suggested by Wei Liu)
- bump sysctl/domctl version numbers.
(suggested by Wei Liu)
---
tools/flask/policy/modules/dom0.te | 4 +--
tools/libxc/xc_psr.c | 50 +++++++++++++-------------
xen/arch/x86/domctl.c | 71 ++++++++++++++++++-------------------
xen/arch/x86/sysctl.c | 28 +++++++--------
xen/include/public/domctl.h | 24 ++++++-------
xen/include/public/sysctl.h | 12 +++----
xen/xsm/flask/hooks.c | 8 ++---
xen/xsm/flask/policy/access_vectors | 8 ++---
8 files changed, 102 insertions(+), 103 deletions(-)
diff --git a/tools/flask/policy/modules/dom0.te b/tools/flask/policy/modules/dom0.te
index 1643b40..07de3d5 100644
--- a/tools/flask/policy/modules/dom0.te
+++ b/tools/flask/policy/modules/dom0.te
@@ -14,7 +14,7 @@ allow dom0_t xen_t:xen {
tmem_control getscheduler setscheduler
};
allow dom0_t xen_t:xen2 {
- resource_op psr_cmt_op psr_cat_op pmu_ctrl get_symbol
+ resource_op psr_cmt_op psr_alloc pmu_ctrl get_symbol
get_cpu_levelling_caps get_cpu_featureset livepatch_op
gcov_op set_parameter
};
@@ -39,7 +39,7 @@ allow dom0_t dom0_t:domain {
};
allow dom0_t dom0_t:domain2 {
set_cpuid gettsc settsc setscheduler set_max_evtchn set_vnumainfo
- get_vnumainfo psr_cmt_op psr_cat_op set_gnttab_limits
+ get_vnumainfo psr_cmt_op psr_alloc set_gnttab_limits
};
allow dom0_t dom0_t:resource { add remove };
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index edec4d1..78deba0 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -258,27 +258,27 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
switch ( type )
{
case XC_PSR_CAT_L3_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM;
+ cmd = XEN_DOMCTL_PSR_SET_L3_CBM;
break;
case XC_PSR_CAT_L3_CBM_CODE:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE;
+ cmd = XEN_DOMCTL_PSR_SET_L3_CODE;
break;
case XC_PSR_CAT_L3_CBM_DATA:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA;
+ cmd = XEN_DOMCTL_PSR_SET_L3_DATA;
break;
case XC_PSR_CAT_L2_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM;
+ cmd = XEN_DOMCTL_PSR_SET_L2_CBM;
break;
default:
errno = EINVAL;
return -1;
}
- domctl.cmd = XEN_DOMCTL_psr_cat_op;
+ domctl.cmd = XEN_DOMCTL_psr_alloc;
domctl.domain = domid;
- domctl.u.psr_cat_op.cmd = cmd;
- domctl.u.psr_cat_op.target = target;
- domctl.u.psr_cat_op.data = data;
+ domctl.u.psr_alloc.cmd = cmd;
+ domctl.u.psr_alloc.target = target;
+ domctl.u.psr_alloc.data = data;
return do_domctl(xch, &domctl);
}
@@ -294,31 +294,31 @@ int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
switch ( type )
{
case XC_PSR_CAT_L3_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM;
+ cmd = XEN_DOMCTL_PSR_GET_L3_CBM;
break;
case XC_PSR_CAT_L3_CBM_CODE:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE;
+ cmd = XEN_DOMCTL_PSR_GET_L3_CODE;
break;
case XC_PSR_CAT_L3_CBM_DATA:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA;
+ cmd = XEN_DOMCTL_PSR_GET_L3_DATA;
break;
case XC_PSR_CAT_L2_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM;
+ cmd = XEN_DOMCTL_PSR_GET_L2_CBM;
break;
default:
errno = EINVAL;
return -1;
}
- domctl.cmd = XEN_DOMCTL_psr_cat_op;
+ domctl.cmd = XEN_DOMCTL_psr_alloc;
domctl.domain = domid;
- domctl.u.psr_cat_op.cmd = cmd;
- domctl.u.psr_cat_op.target = target;
+ domctl.u.psr_alloc.cmd = cmd;
+ domctl.u.psr_alloc.target = target;
rc = do_domctl(xch, &domctl);
if ( !rc )
- *data = domctl.u.psr_cat_op.data;
+ *data = domctl.u.psr_alloc.data;
return rc;
}
@@ -329,29 +329,29 @@ int xc_psr_cat_get_info(xc_interface *xch, uint32_t socket, unsigned int lvl,
int rc = -1;
DECLARE_SYSCTL;
- sysctl.cmd = XEN_SYSCTL_psr_cat_op;
- sysctl.u.psr_cat_op.target = socket;
+ sysctl.cmd = XEN_SYSCTL_psr_alloc;
+ sysctl.u.psr_alloc.target = socket;
switch ( lvl )
{
case 2:
- sysctl.u.psr_cat_op.cmd = XEN_SYSCTL_PSR_CAT_get_l2_info;
+ sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l2_info;
rc = xc_sysctl(xch, &sysctl);
if ( !rc )
{
- *cos_max = sysctl.u.psr_cat_op.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_cat_op.u.cat_info.cbm_len;
+ *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
+ *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
*cdp_enabled = false;
}
break;
case 3:
- sysctl.u.psr_cat_op.cmd = XEN_SYSCTL_PSR_CAT_get_l3_info;
+ sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l3_info;
rc = xc_sysctl(xch, &sysctl);
if ( !rc )
{
- *cos_max = sysctl.u.psr_cat_op.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_cat_op.u.cat_info.cbm_len;
- *cdp_enabled = sysctl.u.psr_cat_op.u.cat_info.flags &
+ *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
+ *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
+ *cdp_enabled = sysctl.u.psr_alloc.u.cat_info.flags &
XEN_SYSCTL_PSR_CAT_L3_CDP;
}
break;
diff --git a/xen/arch/x86/domctl.c b/xen/arch/x86/domctl.c
index 80b4df9..64bb79c 100644
--- a/xen/arch/x86/domctl.c
+++ b/xen/arch/x86/domctl.c
@@ -1438,67 +1438,66 @@ long arch_do_domctl(
}
break;
- case XEN_DOMCTL_psr_cat_op:
- switch ( domctl->u.psr_cat_op.cmd )
+ case XEN_DOMCTL_psr_alloc:
+ switch ( domctl->u.psr_alloc.cmd )
{
- uint32_t val32;
-
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_CBM:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_CODE:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3_CODE);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_DATA:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3_DATA);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L2_CBM:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L2);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+#define domctl_psr_get_val(d, domctl, type, copyback) ({ \
+ uint32_t v_; \
+ int r_ = psr_get_val((d), (domctl)->u.psr_alloc.target, \
+ &v_, (type)); \
+ \
+ (domctl)->u.psr_alloc.data = v_; \
+ (copyback) = true; \
+ r_; \
+})
+
+ case XEN_DOMCTL_PSR_GET_L3_CBM:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3_CODE);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L3_CODE:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_CODE, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3_DATA);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L3_DATA:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_DATA, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L2);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L2_CBM:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L2, copyback);
break;
+#undef domctl_psr_get_val
+
default:
ret = -EOPNOTSUPP;
break;
}
+
break;
case XEN_DOMCTL_disable_migrate:
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 6ba823c..8ae6747 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -171,45 +171,45 @@ long arch_do_sysctl(
break;
- case XEN_SYSCTL_psr_cat_op:
- switch ( sysctl->u.psr_cat_op.cmd )
+ case XEN_SYSCTL_psr_alloc:
+ switch ( sysctl->u.psr_alloc.cmd )
{
uint32_t data[PSR_INFO_ARRAY_SIZE];
- case XEN_SYSCTL_PSR_CAT_get_l3_info:
+ case XEN_SYSCTL_PSR_get_l3_info:
{
- ret = psr_get_info(sysctl->u.psr_cat_op.target,
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_CBM_TYPE_L3, data, ARRAY_SIZE(data));
if ( ret )
break;
- sysctl->u.psr_cat_op.u.cat_info.cos_max =
+ sysctl->u.psr_alloc.u.cat_info.cos_max =
data[PSR_INFO_IDX_COS_MAX];
- sysctl->u.psr_cat_op.u.cat_info.cbm_len =
+ sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
- sysctl->u.psr_cat_op.u.cat_info.flags =
+ sysctl->u.psr_alloc.u.cat_info.flags =
data[PSR_INFO_IDX_CAT_FLAG];
- if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_cat_op) )
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
break;
}
- case XEN_SYSCTL_PSR_CAT_get_l2_info:
+ case XEN_SYSCTL_PSR_get_l2_info:
{
- ret = psr_get_info(sysctl->u.psr_cat_op.target,
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_CBM_TYPE_L2, data, ARRAY_SIZE(data));
if ( ret )
break;
- sysctl->u.psr_cat_op.u.cat_info.cos_max =
+ sysctl->u.psr_alloc.u.cat_info.cos_max =
data[PSR_INFO_IDX_COS_MAX];
- sysctl->u.psr_cat_op.u.cat_info.cbm_len =
+ sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
- sysctl->u.psr_cat_op.u.cat_info.flags =
+ sysctl->u.psr_alloc.u.cat_info.flags =
data[PSR_INFO_IDX_CAT_FLAG];
- if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_cat_op) )
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
break;
}
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 70027ab..eaff9b3 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -1065,16 +1065,16 @@ struct xen_domctl_monitor_op {
} u;
};
-struct xen_domctl_psr_cat_op {
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM 0
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM 1
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE 2
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA 3
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE 4
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA 5
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM 6
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM 7
- uint32_t cmd; /* IN: XEN_DOMCTL_PSR_CAT_OP_* */
+struct xen_domctl_psr_alloc {
+#define XEN_DOMCTL_PSR_SET_L3_CBM 0
+#define XEN_DOMCTL_PSR_GET_L3_CBM 1
+#define XEN_DOMCTL_PSR_SET_L3_CODE 2
+#define XEN_DOMCTL_PSR_SET_L3_DATA 3
+#define XEN_DOMCTL_PSR_GET_L3_CODE 4
+#define XEN_DOMCTL_PSR_GET_L3_DATA 5
+#define XEN_DOMCTL_PSR_SET_L2_CBM 6
+#define XEN_DOMCTL_PSR_GET_L2_CBM 7
+ uint32_t cmd; /* IN: XEN_DOMCTL_PSR_* */
uint32_t target; /* IN */
uint64_t data; /* IN/OUT */
};
@@ -1180,7 +1180,7 @@ struct xen_domctl {
#define XEN_DOMCTL_setvnumainfo 74
#define XEN_DOMCTL_psr_cmt_op 75
#define XEN_DOMCTL_monitor_op 77
-#define XEN_DOMCTL_psr_cat_op 78
+#define XEN_DOMCTL_psr_alloc 78
#define XEN_DOMCTL_soft_reset 79
#define XEN_DOMCTL_set_gnttab_limits 80
#define XEN_DOMCTL_vuart_op 81
@@ -1245,7 +1245,7 @@ struct xen_domctl {
struct xen_domctl_vnuma vnuma;
struct xen_domctl_psr_cmt_op psr_cmt_op;
struct xen_domctl_monitor_op monitor_op;
- struct xen_domctl_psr_cat_op psr_cat_op;
+ struct xen_domctl_psr_alloc psr_alloc;
struct xen_domctl_set_gnttab_limits set_gnttab_limits;
struct xen_domctl_vuart_op vuart_op;
uint8_t pad[128];
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 6140f1a..a50e345 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -696,10 +696,10 @@ struct xen_sysctl_pcitopoinfo {
XEN_GUEST_HANDLE_64(uint32) nodes;
};
-#define XEN_SYSCTL_PSR_CAT_get_l3_info 0
-#define XEN_SYSCTL_PSR_CAT_get_l2_info 1
-struct xen_sysctl_psr_cat_op {
- uint32_t cmd; /* IN: XEN_SYSCTL_PSR_CAT_* */
+#define XEN_SYSCTL_PSR_get_l3_info 0
+#define XEN_SYSCTL_PSR_get_l2_info 1
+struct xen_sysctl_psr_alloc {
+ uint32_t cmd; /* IN: XEN_SYSCTL_PSR_* */
uint32_t target; /* IN */
union {
struct {
@@ -1068,7 +1068,7 @@ struct xen_sysctl {
#define XEN_SYSCTL_gcov_op 20
#define XEN_SYSCTL_psr_cmt_op 21
#define XEN_SYSCTL_pcitopoinfo 22
-#define XEN_SYSCTL_psr_cat_op 23
+#define XEN_SYSCTL_psr_alloc 23
#define XEN_SYSCTL_tmem_op 24
#define XEN_SYSCTL_get_cpu_levelling_caps 25
#define XEN_SYSCTL_get_cpu_featureset 26
@@ -1097,7 +1097,7 @@ struct xen_sysctl {
struct xen_sysctl_scheduler_op scheduler_op;
struct xen_sysctl_gcov_op gcov_op;
struct xen_sysctl_psr_cmt_op psr_cmt_op;
- struct xen_sysctl_psr_cat_op psr_cat_op;
+ struct xen_sysctl_psr_alloc psr_alloc;
struct xen_sysctl_tmem_op tmem_op;
struct xen_sysctl_cpu_levelling_caps cpu_levelling_caps;
struct xen_sysctl_cpu_featureset cpu_featureset;
diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
index f01b4cf..d725e56 100644
--- a/xen/xsm/flask/hooks.c
+++ b/xen/xsm/flask/hooks.c
@@ -743,8 +743,8 @@ static int flask_domctl(struct domain *d, int cmd)
case XEN_DOMCTL_psr_cmt_op:
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_CMT_OP);
- case XEN_DOMCTL_psr_cat_op:
- return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_CAT_OP);
+ case XEN_DOMCTL_psr_alloc:
+ return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_ALLOC);
case XEN_DOMCTL_soft_reset:
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__SOFT_RESET);
@@ -810,9 +810,9 @@ static int flask_sysctl(int cmd)
case XEN_SYSCTL_psr_cmt_op:
return avc_current_has_perm(SECINITSID_XEN, SECCLASS_XEN2,
XEN2__PSR_CMT_OP, NULL);
- case XEN_SYSCTL_psr_cat_op:
+ case XEN_SYSCTL_psr_alloc:
return avc_current_has_perm(SECINITSID_XEN, SECCLASS_XEN2,
- XEN2__PSR_CAT_OP, NULL);
+ XEN2__PSR_ALLOC, NULL);
case XEN_SYSCTL_tmem_op:
return domain_has_xen(current->domain, XEN__TMEM_CONTROL);
diff --git a/xen/xsm/flask/policy/access_vectors b/xen/xsm/flask/policy/access_vectors
index 3a2d863..d0a1ec5 100644
--- a/xen/xsm/flask/policy/access_vectors
+++ b/xen/xsm/flask/policy/access_vectors
@@ -85,8 +85,8 @@ class xen2
resource_op
# XEN_SYSCTL_psr_cmt_op
psr_cmt_op
-# XEN_SYSCTL_psr_cat_op
- psr_cat_op
+# XEN_SYSCTL_psr_alloc
+ psr_alloc
# XENPF_get_symbol
get_symbol
# PMU control
@@ -246,8 +246,8 @@ class domain2
mem_paging
# XENMEM_sharing_op
mem_sharing
-# XEN_DOMCTL_psr_cat_op
- psr_cat_op
+# XEN_DOMCTL_psr_alloc
+ psr_alloc
# XEN_DOMCTL_set_gnttab_limits
set_gnttab_limits
}
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9.1 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
2017-10-20 8:28 ` [PATCH v9 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general Yi Sun
@ 2017-10-24 9:10 ` Yi Sun
2017-10-24 12:27 ` Jan Beulich
2017-10-30 17:22 ` Daniel De Graaf
0 siblings, 2 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-24 9:10 UTC (permalink / raw)
To: xen-devel
Cc: Yi Sun, Andrew Cooper, Ian Jackson, Jan Beulich, Chao Peng,
Wei Liu, Daniel De Graaf, Roger Pau Monné
This patch renames PSR sysctl/domctl interfaces and related xsm policy to
make them be general for all resource allocation features but not only
for CAT. Then, we can resuse the interfaces for all allocation features.
Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
macros. E.g.:
1. psr_cat_op -> psr_alloc
2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Daniel De Graaf <dgdegra@tycho.nsa.gov>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v9:
- rename 'psr_cat_op' to 'psr_alloc' in xen.if.
v7:
- add single trailing underscore for internal variabled in macro.
(suggested by Jan Beulich)
- add parentheses for input parameters of marcro.
(suggested by Jan Beulich)
- adjust the postion of macro.
(suggested by Jan Beulich)
v6:
- move macro definition into the function and undefine it after use.
(suggested by Roger Pau Monné)
- do not bump sysctl version because it has been bumped for 4.10.
(suggested by Roger Pau Monné)
v5:
- remove domctl version number upgrade.
(suggested by Jan Beulich)
- restore 'XEN_SYSCTL_PSR_CAT_L3_CDP'.
(suggested by Jan Beulich)
- define a local macro to complete psr get value flow.
(suggested by Roger Pau Monné)
- remove 'Reviewed-by' and 'Acked-by'.
(suggested by Wei Liu)
v4:
- remove 'ALLOC_' from names.
(suggested by Roger Pau Monné)
- fix comments.
(suggested by Roger Pau Monné)
v3:
- remove 'op/OP' from names and modify some names from 'PSR_CAT' to
'PSR_ALLOC'.
(suggested by Roger Pau Monné)
v1:
- add description about what to be changed in commit message.
(suggested by Wei Liu)
- bump sysctl/domctl version numbers.
(suggested by Wei Liu)
---
tools/flask/policy/modules/dom0.te | 4 +--
tools/flask/policy/modules/xen.if | 2 +-
tools/libxc/xc_psr.c | 50 +++++++++++++-------------
xen/arch/x86/domctl.c | 71 ++++++++++++++++++-------------------
xen/arch/x86/sysctl.c | 28 +++++++--------
xen/include/public/domctl.h | 24 ++++++-------
xen/include/public/sysctl.h | 12 +++----
xen/xsm/flask/hooks.c | 8 ++---
xen/xsm/flask/policy/access_vectors | 8 ++---
9 files changed, 103 insertions(+), 104 deletions(-)
diff --git a/tools/flask/policy/modules/dom0.te b/tools/flask/policy/modules/dom0.te
index 1643b40..07de3d5 100644
--- a/tools/flask/policy/modules/dom0.te
+++ b/tools/flask/policy/modules/dom0.te
@@ -14,7 +14,7 @@ allow dom0_t xen_t:xen {
tmem_control getscheduler setscheduler
};
allow dom0_t xen_t:xen2 {
- resource_op psr_cmt_op psr_cat_op pmu_ctrl get_symbol
+ resource_op psr_cmt_op psr_alloc pmu_ctrl get_symbol
get_cpu_levelling_caps get_cpu_featureset livepatch_op
gcov_op set_parameter
};
@@ -39,7 +39,7 @@ allow dom0_t dom0_t:domain {
};
allow dom0_t dom0_t:domain2 {
set_cpuid gettsc settsc setscheduler set_max_evtchn set_vnumainfo
- get_vnumainfo psr_cmt_op psr_cat_op set_gnttab_limits
+ get_vnumainfo psr_cmt_op psr_alloc set_gnttab_limits
};
allow dom0_t dom0_t:resource { add remove };
diff --git a/tools/flask/policy/modules/xen.if b/tools/flask/policy/modules/xen.if
index 5543749..cb48a6c 100644
--- a/tools/flask/policy/modules/xen.if
+++ b/tools/flask/policy/modules/xen.if
@@ -52,7 +52,7 @@ define(`create_domain_common', `
settime setdomainhandle getvcpucontext set_misc_info };
allow $1 $2:domain2 { set_cpuid settsc setscheduler setclaim
set_max_evtchn set_vnumainfo get_vnumainfo cacheflush
- psr_cmt_op psr_cat_op soft_reset set_gnttab_limits };
+ psr_cmt_op psr_alloc soft_reset set_gnttab_limits };
allow $1 $2:security check_context;
allow $1 $2:shadow enable;
allow $1 $2:mmu { map_read map_write adjust memorymap physmap pinpage mmuext_op updatemp };
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index edec4d1..78deba0 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -258,27 +258,27 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
switch ( type )
{
case XC_PSR_CAT_L3_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM;
+ cmd = XEN_DOMCTL_PSR_SET_L3_CBM;
break;
case XC_PSR_CAT_L3_CBM_CODE:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE;
+ cmd = XEN_DOMCTL_PSR_SET_L3_CODE;
break;
case XC_PSR_CAT_L3_CBM_DATA:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA;
+ cmd = XEN_DOMCTL_PSR_SET_L3_DATA;
break;
case XC_PSR_CAT_L2_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM;
+ cmd = XEN_DOMCTL_PSR_SET_L2_CBM;
break;
default:
errno = EINVAL;
return -1;
}
- domctl.cmd = XEN_DOMCTL_psr_cat_op;
+ domctl.cmd = XEN_DOMCTL_psr_alloc;
domctl.domain = domid;
- domctl.u.psr_cat_op.cmd = cmd;
- domctl.u.psr_cat_op.target = target;
- domctl.u.psr_cat_op.data = data;
+ domctl.u.psr_alloc.cmd = cmd;
+ domctl.u.psr_alloc.target = target;
+ domctl.u.psr_alloc.data = data;
return do_domctl(xch, &domctl);
}
@@ -294,31 +294,31 @@ int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
switch ( type )
{
case XC_PSR_CAT_L3_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM;
+ cmd = XEN_DOMCTL_PSR_GET_L3_CBM;
break;
case XC_PSR_CAT_L3_CBM_CODE:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE;
+ cmd = XEN_DOMCTL_PSR_GET_L3_CODE;
break;
case XC_PSR_CAT_L3_CBM_DATA:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA;
+ cmd = XEN_DOMCTL_PSR_GET_L3_DATA;
break;
case XC_PSR_CAT_L2_CBM:
- cmd = XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM;
+ cmd = XEN_DOMCTL_PSR_GET_L2_CBM;
break;
default:
errno = EINVAL;
return -1;
}
- domctl.cmd = XEN_DOMCTL_psr_cat_op;
+ domctl.cmd = XEN_DOMCTL_psr_alloc;
domctl.domain = domid;
- domctl.u.psr_cat_op.cmd = cmd;
- domctl.u.psr_cat_op.target = target;
+ domctl.u.psr_alloc.cmd = cmd;
+ domctl.u.psr_alloc.target = target;
rc = do_domctl(xch, &domctl);
if ( !rc )
- *data = domctl.u.psr_cat_op.data;
+ *data = domctl.u.psr_alloc.data;
return rc;
}
@@ -329,29 +329,29 @@ int xc_psr_cat_get_info(xc_interface *xch, uint32_t socket, unsigned int lvl,
int rc = -1;
DECLARE_SYSCTL;
- sysctl.cmd = XEN_SYSCTL_psr_cat_op;
- sysctl.u.psr_cat_op.target = socket;
+ sysctl.cmd = XEN_SYSCTL_psr_alloc;
+ sysctl.u.psr_alloc.target = socket;
switch ( lvl )
{
case 2:
- sysctl.u.psr_cat_op.cmd = XEN_SYSCTL_PSR_CAT_get_l2_info;
+ sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l2_info;
rc = xc_sysctl(xch, &sysctl);
if ( !rc )
{
- *cos_max = sysctl.u.psr_cat_op.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_cat_op.u.cat_info.cbm_len;
+ *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
+ *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
*cdp_enabled = false;
}
break;
case 3:
- sysctl.u.psr_cat_op.cmd = XEN_SYSCTL_PSR_CAT_get_l3_info;
+ sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l3_info;
rc = xc_sysctl(xch, &sysctl);
if ( !rc )
{
- *cos_max = sysctl.u.psr_cat_op.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_cat_op.u.cat_info.cbm_len;
- *cdp_enabled = sysctl.u.psr_cat_op.u.cat_info.flags &
+ *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
+ *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
+ *cdp_enabled = sysctl.u.psr_alloc.u.cat_info.flags &
XEN_SYSCTL_PSR_CAT_L3_CDP;
}
break;
diff --git a/xen/arch/x86/domctl.c b/xen/arch/x86/domctl.c
index 80b4df9..64bb79c 100644
--- a/xen/arch/x86/domctl.c
+++ b/xen/arch/x86/domctl.c
@@ -1438,67 +1438,66 @@ long arch_do_domctl(
}
break;
- case XEN_DOMCTL_psr_cat_op:
- switch ( domctl->u.psr_cat_op.cmd )
+ case XEN_DOMCTL_psr_alloc:
+ switch ( domctl->u.psr_alloc.cmd )
{
- uint32_t val32;
-
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_CBM:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_CODE:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3_CODE);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L3_DATA:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L3_DATA);
break;
- case XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM:
- ret = psr_set_val(d, domctl->u.psr_cat_op.target,
- domctl->u.psr_cat_op.data,
+ case XEN_DOMCTL_PSR_SET_L2_CBM:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
PSR_CBM_TYPE_L2);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+#define domctl_psr_get_val(d, domctl, type, copyback) ({ \
+ uint32_t v_; \
+ int r_ = psr_get_val((d), (domctl)->u.psr_alloc.target, \
+ &v_, (type)); \
+ \
+ (domctl)->u.psr_alloc.data = v_; \
+ (copyback) = true; \
+ r_; \
+})
+
+ case XEN_DOMCTL_PSR_GET_L3_CBM:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3_CODE);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L3_CODE:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_CODE, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L3_DATA);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L3_DATA:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_DATA, copyback);
break;
- case XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM:
- ret = psr_get_val(d, domctl->u.psr_cat_op.target,
- &val32, PSR_CBM_TYPE_L2);
- domctl->u.psr_cat_op.data = val32;
- copyback = true;
+ case XEN_DOMCTL_PSR_GET_L2_CBM:
+ ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L2, copyback);
break;
+#undef domctl_psr_get_val
+
default:
ret = -EOPNOTSUPP;
break;
}
+
break;
case XEN_DOMCTL_disable_migrate:
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 6ba823c..8ae6747 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -171,45 +171,45 @@ long arch_do_sysctl(
break;
- case XEN_SYSCTL_psr_cat_op:
- switch ( sysctl->u.psr_cat_op.cmd )
+ case XEN_SYSCTL_psr_alloc:
+ switch ( sysctl->u.psr_alloc.cmd )
{
uint32_t data[PSR_INFO_ARRAY_SIZE];
- case XEN_SYSCTL_PSR_CAT_get_l3_info:
+ case XEN_SYSCTL_PSR_get_l3_info:
{
- ret = psr_get_info(sysctl->u.psr_cat_op.target,
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_CBM_TYPE_L3, data, ARRAY_SIZE(data));
if ( ret )
break;
- sysctl->u.psr_cat_op.u.cat_info.cos_max =
+ sysctl->u.psr_alloc.u.cat_info.cos_max =
data[PSR_INFO_IDX_COS_MAX];
- sysctl->u.psr_cat_op.u.cat_info.cbm_len =
+ sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
- sysctl->u.psr_cat_op.u.cat_info.flags =
+ sysctl->u.psr_alloc.u.cat_info.flags =
data[PSR_INFO_IDX_CAT_FLAG];
- if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_cat_op) )
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
break;
}
- case XEN_SYSCTL_PSR_CAT_get_l2_info:
+ case XEN_SYSCTL_PSR_get_l2_info:
{
- ret = psr_get_info(sysctl->u.psr_cat_op.target,
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_CBM_TYPE_L2, data, ARRAY_SIZE(data));
if ( ret )
break;
- sysctl->u.psr_cat_op.u.cat_info.cos_max =
+ sysctl->u.psr_alloc.u.cat_info.cos_max =
data[PSR_INFO_IDX_COS_MAX];
- sysctl->u.psr_cat_op.u.cat_info.cbm_len =
+ sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
- sysctl->u.psr_cat_op.u.cat_info.flags =
+ sysctl->u.psr_alloc.u.cat_info.flags =
data[PSR_INFO_IDX_CAT_FLAG];
- if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_cat_op) )
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
break;
}
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 70027ab..eaff9b3 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -1065,16 +1065,16 @@ struct xen_domctl_monitor_op {
} u;
};
-struct xen_domctl_psr_cat_op {
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM 0
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM 1
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE 2
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA 3
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE 4
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA 5
-#define XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM 6
-#define XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM 7
- uint32_t cmd; /* IN: XEN_DOMCTL_PSR_CAT_OP_* */
+struct xen_domctl_psr_alloc {
+#define XEN_DOMCTL_PSR_SET_L3_CBM 0
+#define XEN_DOMCTL_PSR_GET_L3_CBM 1
+#define XEN_DOMCTL_PSR_SET_L3_CODE 2
+#define XEN_DOMCTL_PSR_SET_L3_DATA 3
+#define XEN_DOMCTL_PSR_GET_L3_CODE 4
+#define XEN_DOMCTL_PSR_GET_L3_DATA 5
+#define XEN_DOMCTL_PSR_SET_L2_CBM 6
+#define XEN_DOMCTL_PSR_GET_L2_CBM 7
+ uint32_t cmd; /* IN: XEN_DOMCTL_PSR_* */
uint32_t target; /* IN */
uint64_t data; /* IN/OUT */
};
@@ -1180,7 +1180,7 @@ struct xen_domctl {
#define XEN_DOMCTL_setvnumainfo 74
#define XEN_DOMCTL_psr_cmt_op 75
#define XEN_DOMCTL_monitor_op 77
-#define XEN_DOMCTL_psr_cat_op 78
+#define XEN_DOMCTL_psr_alloc 78
#define XEN_DOMCTL_soft_reset 79
#define XEN_DOMCTL_set_gnttab_limits 80
#define XEN_DOMCTL_vuart_op 81
@@ -1245,7 +1245,7 @@ struct xen_domctl {
struct xen_domctl_vnuma vnuma;
struct xen_domctl_psr_cmt_op psr_cmt_op;
struct xen_domctl_monitor_op monitor_op;
- struct xen_domctl_psr_cat_op psr_cat_op;
+ struct xen_domctl_psr_alloc psr_alloc;
struct xen_domctl_set_gnttab_limits set_gnttab_limits;
struct xen_domctl_vuart_op vuart_op;
uint8_t pad[128];
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 6140f1a..a50e345 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -696,10 +696,10 @@ struct xen_sysctl_pcitopoinfo {
XEN_GUEST_HANDLE_64(uint32) nodes;
};
-#define XEN_SYSCTL_PSR_CAT_get_l3_info 0
-#define XEN_SYSCTL_PSR_CAT_get_l2_info 1
-struct xen_sysctl_psr_cat_op {
- uint32_t cmd; /* IN: XEN_SYSCTL_PSR_CAT_* */
+#define XEN_SYSCTL_PSR_get_l3_info 0
+#define XEN_SYSCTL_PSR_get_l2_info 1
+struct xen_sysctl_psr_alloc {
+ uint32_t cmd; /* IN: XEN_SYSCTL_PSR_* */
uint32_t target; /* IN */
union {
struct {
@@ -1068,7 +1068,7 @@ struct xen_sysctl {
#define XEN_SYSCTL_gcov_op 20
#define XEN_SYSCTL_psr_cmt_op 21
#define XEN_SYSCTL_pcitopoinfo 22
-#define XEN_SYSCTL_psr_cat_op 23
+#define XEN_SYSCTL_psr_alloc 23
#define XEN_SYSCTL_tmem_op 24
#define XEN_SYSCTL_get_cpu_levelling_caps 25
#define XEN_SYSCTL_get_cpu_featureset 26
@@ -1097,7 +1097,7 @@ struct xen_sysctl {
struct xen_sysctl_scheduler_op scheduler_op;
struct xen_sysctl_gcov_op gcov_op;
struct xen_sysctl_psr_cmt_op psr_cmt_op;
- struct xen_sysctl_psr_cat_op psr_cat_op;
+ struct xen_sysctl_psr_alloc psr_alloc;
struct xen_sysctl_tmem_op tmem_op;
struct xen_sysctl_cpu_levelling_caps cpu_levelling_caps;
struct xen_sysctl_cpu_featureset cpu_featureset;
diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
index f01b4cf..d725e56 100644
--- a/xen/xsm/flask/hooks.c
+++ b/xen/xsm/flask/hooks.c
@@ -743,8 +743,8 @@ static int flask_domctl(struct domain *d, int cmd)
case XEN_DOMCTL_psr_cmt_op:
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_CMT_OP);
- case XEN_DOMCTL_psr_cat_op:
- return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_CAT_OP);
+ case XEN_DOMCTL_psr_alloc:
+ return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__PSR_ALLOC);
case XEN_DOMCTL_soft_reset:
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__SOFT_RESET);
@@ -810,9 +810,9 @@ static int flask_sysctl(int cmd)
case XEN_SYSCTL_psr_cmt_op:
return avc_current_has_perm(SECINITSID_XEN, SECCLASS_XEN2,
XEN2__PSR_CMT_OP, NULL);
- case XEN_SYSCTL_psr_cat_op:
+ case XEN_SYSCTL_psr_alloc:
return avc_current_has_perm(SECINITSID_XEN, SECCLASS_XEN2,
- XEN2__PSR_CAT_OP, NULL);
+ XEN2__PSR_ALLOC, NULL);
case XEN_SYSCTL_tmem_op:
return domain_has_xen(current->domain, XEN__TMEM_CONTROL);
diff --git a/xen/xsm/flask/policy/access_vectors b/xen/xsm/flask/policy/access_vectors
index 3a2d863..d0a1ec5 100644
--- a/xen/xsm/flask/policy/access_vectors
+++ b/xen/xsm/flask/policy/access_vectors
@@ -85,8 +85,8 @@ class xen2
resource_op
# XEN_SYSCTL_psr_cmt_op
psr_cmt_op
-# XEN_SYSCTL_psr_cat_op
- psr_cat_op
+# XEN_SYSCTL_psr_alloc
+ psr_alloc
# XENPF_get_symbol
get_symbol
# PMU control
@@ -246,8 +246,8 @@ class domain2
mem_paging
# XENMEM_sharing_op
mem_sharing
-# XEN_DOMCTL_psr_cat_op
- psr_cat_op
+# XEN_DOMCTL_psr_alloc
+ psr_alloc
# XEN_DOMCTL_set_gnttab_limits
set_gnttab_limits
}
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v9.1 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
2017-10-24 9:10 ` [PATCH v9.1 " Yi Sun
@ 2017-10-24 12:27 ` Jan Beulich
2017-10-30 7:59 ` Yi Sun
2017-10-30 17:22 ` Daniel De Graaf
1 sibling, 1 reply; 31+ messages in thread
From: Jan Beulich @ 2017-10-24 12:27 UTC (permalink / raw)
To: Yi Sun
Cc: Wei Liu, Andrew Cooper, Ian Jackson, xen-devel, Chao Peng,
Daniel De Graaf, Roger Pau Monné
>>> On 24.10.17 at 11:10, <yi.y.sun@linux.intel.com> wrote:
> This patch renames PSR sysctl/domctl interfaces and related xsm policy to
> make them be general for all resource allocation features but not only
> for CAT. Then, we can resuse the interfaces for all allocation features.
>
> Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
> macros. E.g.:
> 1. psr_cat_op -> psr_alloc
> 2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
> 3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
> 4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
> 5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
>
> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
> Reviewed-by: Wei Liu <wei.liu2@citrix.com>
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
> Acked-by: Jan Beulich <jbeulich@suse.com>
> Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
> ---
> CC: Jan Beulich <jbeulich@suse.com>
> CC: Andrew Cooper <andrew.cooper3@citrix.com>
> CC: Wei Liu <wei.liu2@citrix.com>
> CC: Ian Jackson <ian.jackson@eu.citrix.com>
> CC: Daniel De Graaf <dgdegra@tycho.nsa.gov>
> CC: Roger Pau Monné <roger.pau@citrix.com>
> CC: Chao Peng <chao.p.peng@linux.intel.com>
>
> v9:
> - rename 'psr_cat_op' to 'psr_alloc' in xen.if.
Even if this was just a simple oversight and an easy rename, I think
strictly speaking it invalidates Daniel's ack.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v9.1 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
2017-10-24 12:27 ` Jan Beulich
@ 2017-10-30 7:59 ` Yi Sun
0 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-30 7:59 UTC (permalink / raw)
To: Jan Beulich
Cc: Wei Liu, Andrew Cooper, Ian Jackson, xen-devel, Chao Peng,
Daniel De Graaf, Roger Pau Monné
On 17-10-24 06:27:26, Jan Beulich wrote:
> >>> On 24.10.17 at 11:10, <yi.y.sun@linux.intel.com> wrote:
> > This patch renames PSR sysctl/domctl interfaces and related xsm policy to
> > make them be general for all resource allocation features but not only
> > for CAT. Then, we can resuse the interfaces for all allocation features.
> >
> > Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
> > macros. E.g.:
> > 1. psr_cat_op -> psr_alloc
> > 2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
> > 3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
> > 4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
> > 5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
> >
> > Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
> > Reviewed-by: Wei Liu <wei.liu2@citrix.com>
> > Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
> > Acked-by: Jan Beulich <jbeulich@suse.com>
> > Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
> > ---
> > CC: Jan Beulich <jbeulich@suse.com>
> > CC: Andrew Cooper <andrew.cooper3@citrix.com>
> > CC: Wei Liu <wei.liu2@citrix.com>
> > CC: Ian Jackson <ian.jackson@eu.citrix.com>
> > CC: Daniel De Graaf <dgdegra@tycho.nsa.gov>
> > CC: Roger Pau Monné <roger.pau@citrix.com>
> > CC: Chao Peng <chao.p.peng@linux.intel.com>
> >
> > v9:
> > - rename 'psr_cat_op' to 'psr_alloc' in xen.if.
>
> Even if this was just a simple oversight and an easy rename, I think
> strictly speaking it invalidates Daniel's ack.
>
> Jan
Sorry for that.
Hi, Daniel,
Could you please review the change again? Thank you!
BRs,
Sun Yi
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v9.1 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
2017-10-24 9:10 ` [PATCH v9.1 " Yi Sun
2017-10-24 12:27 ` Jan Beulich
@ 2017-10-30 17:22 ` Daniel De Graaf
1 sibling, 0 replies; 31+ messages in thread
From: Daniel De Graaf @ 2017-10-30 17:22 UTC (permalink / raw)
To: Yi Sun, xen-devel
Cc: Wei Liu, Andrew Cooper, Ian Jackson, Jan Beulich, Chao Peng,
Roger Pau Monné
On 10/24/2017 05:10 AM, Yi Sun wrote:
> This patch renames PSR sysctl/domctl interfaces and related xsm policy to
> make them be general for all resource allocation features but not only
> for CAT. Then, we can resuse the interfaces for all allocation features.
>
> Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
> macros. E.g.:
> 1. psr_cat_op -> psr_alloc
> 2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
> 3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
> 4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
> 5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v9 03/16] x86: rename 'cbm_type' to 'psr_type' to make it general
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
2017-10-20 8:28 ` [PATCH v9 01/16] docs: create Memory Bandwidth Allocation (MBA) feature document Yi Sun
2017-10-20 8:28 ` [PATCH v9 02/16] Rename PSR sysctl/domctl interfaces and xsm policy to make them be general Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 04/16] x86: a few optimizations to psr codes Yi Sun
` (13 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch renames 'cbm_type' to 'psr_type' to generalize it.
Then, we can reuse this for all psr allocation features.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- correct character of reviewer's name.
(suggested by Jan Beulich)
v4:
- fix words in commit message.
(suggested by Roger Pau Monné)
v3:
- replace 'psr_val_type' to 'psr_type' and remove '_VAL' from the enum
items.
(suggested by Roger Pau Monné)
v2:
- replace 'PSR_VAL_TYPE_{L3, L2}' to 'PSR_VAL_TYPE_{L3, L2}_CBM'.
(suggested by Chao Peng)
---
xen/arch/x86/domctl.c | 16 ++++++------
xen/arch/x86/psr.c | 62 +++++++++++++++++++++++++----------------------
xen/arch/x86/sysctl.c | 4 +--
xen/include/asm-x86/psr.h | 18 +++++++-------
4 files changed, 52 insertions(+), 48 deletions(-)
diff --git a/xen/arch/x86/domctl.c b/xen/arch/x86/domctl.c
index 64bb79c..ddd3b6d 100644
--- a/xen/arch/x86/domctl.c
+++ b/xen/arch/x86/domctl.c
@@ -1444,25 +1444,25 @@ long arch_do_domctl(
case XEN_DOMCTL_PSR_SET_L3_CBM:
ret = psr_set_val(d, domctl->u.psr_alloc.target,
domctl->u.psr_alloc.data,
- PSR_CBM_TYPE_L3);
+ PSR_TYPE_L3_CBM);
break;
case XEN_DOMCTL_PSR_SET_L3_CODE:
ret = psr_set_val(d, domctl->u.psr_alloc.target,
domctl->u.psr_alloc.data,
- PSR_CBM_TYPE_L3_CODE);
+ PSR_TYPE_L3_CODE);
break;
case XEN_DOMCTL_PSR_SET_L3_DATA:
ret = psr_set_val(d, domctl->u.psr_alloc.target,
domctl->u.psr_alloc.data,
- PSR_CBM_TYPE_L3_DATA);
+ PSR_TYPE_L3_DATA);
break;
case XEN_DOMCTL_PSR_SET_L2_CBM:
ret = psr_set_val(d, domctl->u.psr_alloc.target,
domctl->u.psr_alloc.data,
- PSR_CBM_TYPE_L2);
+ PSR_TYPE_L2_CBM);
break;
#define domctl_psr_get_val(d, domctl, type, copyback) ({ \
@@ -1476,19 +1476,19 @@ long arch_do_domctl(
})
case XEN_DOMCTL_PSR_GET_L3_CBM:
- ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3, copyback);
+ ret = domctl_psr_get_val(d, domctl, PSR_TYPE_L3_CBM, copyback);
break;
case XEN_DOMCTL_PSR_GET_L3_CODE:
- ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_CODE, copyback);
+ ret = domctl_psr_get_val(d, domctl, PSR_TYPE_L3_CODE, copyback);
break;
case XEN_DOMCTL_PSR_GET_L3_DATA:
- ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L3_DATA, copyback);
+ ret = domctl_psr_get_val(d, domctl, PSR_TYPE_L3_DATA, copyback);
break;
case XEN_DOMCTL_PSR_GET_L2_CBM:
- ret = domctl_psr_get_val(d, domctl, PSR_CBM_TYPE_L2, copyback);
+ ret = domctl_psr_get_val(d, domctl, PSR_TYPE_L2_CBM, copyback);
break;
#undef domctl_psr_get_val
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 1abb9b4..7d8295e 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -100,24 +100,24 @@ static const struct feat_props {
unsigned int cos_num;
/*
- * An array to save all 'enum cbm_type' values of the feature. It is
+ * An array to save all 'enum psr_type' values of the feature. It is
* used with cos_num together to get/write a feature's COS registers
* values one by one.
*/
- enum cbm_type type[MAX_COS_NUM];
+ enum psr_type type[MAX_COS_NUM];
/*
* alt_type is 'alternative type'. When this 'alt_type' is input, the
* feature does some special operations.
*/
- enum cbm_type alt_type;
+ enum psr_type alt_type;
/* get_feat_info is used to return feature HW info through sysctl. */
bool (*get_feat_info)(const struct feat_node *feat,
uint32_t data[], unsigned int array_len);
/* write_msr is used to write out feature MSR register. */
- void (*write_msr)(unsigned int cos, uint32_t val, enum cbm_type type);
+ void (*write_msr)(unsigned int cos, uint32_t val, enum psr_type type);
} *feat_props[FEAT_TYPE_NUM];
/*
@@ -215,13 +215,13 @@ static void free_socket_resources(unsigned int socket)
bitmap_zero(info->dom_set, DOMID_IDLE + 1);
}
-static enum psr_feat_type psr_cbm_type_to_feat_type(enum cbm_type type)
+static enum psr_feat_type psr_type_to_feat_type(enum psr_type type)
{
enum psr_feat_type feat_type = FEAT_TYPE_UNKNOWN;
switch ( type )
{
- case PSR_CBM_TYPE_L3:
+ case PSR_TYPE_L3_CBM:
feat_type = FEAT_TYPE_L3_CAT;
/*
@@ -233,12 +233,12 @@ static enum psr_feat_type psr_cbm_type_to_feat_type(enum cbm_type type)
break;
- case PSR_CBM_TYPE_L3_DATA:
- case PSR_CBM_TYPE_L3_CODE:
+ case PSR_TYPE_L3_DATA:
+ case PSR_TYPE_L3_CODE:
feat_type = FEAT_TYPE_L3_CDP;
break;
- case PSR_CBM_TYPE_L2:
+ case PSR_TYPE_L2_CBM:
feat_type = FEAT_TYPE_L2_CAT;
break;
@@ -362,15 +362,16 @@ static bool cat_get_feat_info(const struct feat_node *feat,
}
/* L3 CAT props */
-static void l3_cat_write_msr(unsigned int cos, uint32_t val, enum cbm_type type)
+static void l3_cat_write_msr(unsigned int cos, uint32_t val,
+ enum psr_type type)
{
wrmsrl(MSR_IA32_PSR_L3_MASK(cos), val);
}
static const struct feat_props l3_cat_props = {
.cos_num = 1,
- .type[0] = PSR_CBM_TYPE_L3,
- .alt_type = PSR_CBM_TYPE_UNKNOWN,
+ .type[0] = PSR_TYPE_L3_CBM,
+ .alt_type = PSR_TYPE_UNKNOWN,
.get_feat_info = cat_get_feat_info,
.write_msr = l3_cat_write_msr,
};
@@ -387,9 +388,10 @@ static bool l3_cdp_get_feat_info(const struct feat_node *feat,
return true;
}
-static void l3_cdp_write_msr(unsigned int cos, uint32_t val, enum cbm_type type)
+static void l3_cdp_write_msr(unsigned int cos, uint32_t val,
+ enum psr_type type)
{
- wrmsrl(((type == PSR_CBM_TYPE_L3_DATA) ?
+ wrmsrl(((type == PSR_TYPE_L3_DATA) ?
MSR_IA32_PSR_L3_MASK_DATA(cos) :
MSR_IA32_PSR_L3_MASK_CODE(cos)),
val);
@@ -397,23 +399,24 @@ static void l3_cdp_write_msr(unsigned int cos, uint32_t val, enum cbm_type type)
static const struct feat_props l3_cdp_props = {
.cos_num = 2,
- .type[0] = PSR_CBM_TYPE_L3_DATA,
- .type[1] = PSR_CBM_TYPE_L3_CODE,
- .alt_type = PSR_CBM_TYPE_L3,
+ .type[0] = PSR_TYPE_L3_DATA,
+ .type[1] = PSR_TYPE_L3_CODE,
+ .alt_type = PSR_TYPE_L3_CBM,
.get_feat_info = l3_cdp_get_feat_info,
.write_msr = l3_cdp_write_msr,
};
/* L2 CAT props */
-static void l2_cat_write_msr(unsigned int cos, uint32_t val, enum cbm_type type)
+static void l2_cat_write_msr(unsigned int cos, uint32_t val,
+ enum psr_type type)
{
wrmsrl(MSR_IA32_PSR_L2_MASK(cos), val);
}
static const struct feat_props l2_cat_props = {
.cos_num = 1,
- .type[0] = PSR_CBM_TYPE_L2,
- .alt_type = PSR_CBM_TYPE_UNKNOWN,
+ .type[0] = PSR_TYPE_L2_CBM,
+ .alt_type = PSR_TYPE_UNKNOWN,
.get_feat_info = cat_get_feat_info,
.write_msr = l2_cat_write_msr,
};
@@ -675,7 +678,7 @@ static struct psr_socket_info *get_socket_info(unsigned int socket)
return socket_info + socket;
}
-int psr_get_info(unsigned int socket, enum cbm_type type,
+int psr_get_info(unsigned int socket, enum psr_type type,
uint32_t data[], unsigned int array_len)
{
const struct psr_socket_info *info = get_socket_info(socket);
@@ -687,7 +690,7 @@ int psr_get_info(unsigned int socket, enum cbm_type type,
if ( IS_ERR(info) )
return PTR_ERR(info);
- feat_type = psr_cbm_type_to_feat_type(type);
+ feat_type = psr_type_to_feat_type(type);
if ( feat_type >= ARRAY_SIZE(info->features) )
return -ENOENT;
@@ -708,7 +711,7 @@ int psr_get_info(unsigned int socket, enum cbm_type type,
}
int psr_get_val(struct domain *d, unsigned int socket,
- uint32_t *val, enum cbm_type type)
+ uint32_t *val, enum psr_type type)
{
const struct psr_socket_info *info = get_socket_info(socket);
const struct feat_node *feat;
@@ -720,7 +723,7 @@ int psr_get_val(struct domain *d, unsigned int socket,
if ( IS_ERR(info) )
return PTR_ERR(info);
- feat_type = psr_cbm_type_to_feat_type(type);
+ feat_type = psr_type_to_feat_type(type);
if ( feat_type >= ARRAY_SIZE(info->features) )
return -ENOENT;
@@ -850,7 +853,7 @@ static int insert_val_into_array(uint32_t val[],
unsigned int array_len,
const struct psr_socket_info *info,
enum psr_feat_type feat_type,
- enum cbm_type type,
+ enum psr_type type,
uint32_t new_val)
{
const struct feat_node *feat;
@@ -886,8 +889,9 @@ static int insert_val_into_array(uint32_t val[],
/*
* Value setting position is same as feature array.
* For CDP, user may set both DATA and CODE to same value. For such case,
- * user input 'PSR_CBM_TYPE_L3' as type. The alternative type of CDP is same
- * as it. So we should set new_val to both of DATA and CODE under such case.
+ * user input 'PSR_TYPE_L3_CBM' as type. The alternative type of CDP is
+ * same as it. So we should set new_val to both of DATA and CODE under such
+ * case.
*/
for ( i = 0; i < props->cos_num; i++ )
{
@@ -1179,7 +1183,7 @@ static int write_psr_msrs(unsigned int socket, unsigned int cos,
}
int psr_set_val(struct domain *d, unsigned int socket,
- uint64_t new_val, enum cbm_type type)
+ uint64_t new_val, enum psr_type type)
{
unsigned int old_cos, array_len;
int cos, ret;
@@ -1195,7 +1199,7 @@ int psr_set_val(struct domain *d, unsigned int socket,
if ( new_val != val )
return -EINVAL;
- feat_type = psr_cbm_type_to_feat_type(type);
+ feat_type = psr_type_to_feat_type(type);
if ( feat_type >= ARRAY_SIZE(info->features) ||
!info->features[feat_type] )
return -ENOENT;
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 8ae6747..6867ee1 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -179,7 +179,7 @@ long arch_do_sysctl(
case XEN_SYSCTL_PSR_get_l3_info:
{
ret = psr_get_info(sysctl->u.psr_alloc.target,
- PSR_CBM_TYPE_L3, data, ARRAY_SIZE(data));
+ PSR_TYPE_L3_CBM, data, ARRAY_SIZE(data));
if ( ret )
break;
@@ -198,7 +198,7 @@ long arch_do_sysctl(
case XEN_SYSCTL_PSR_get_l2_info:
{
ret = psr_get_info(sysctl->u.psr_alloc.target,
- PSR_CBM_TYPE_L2, data, ARRAY_SIZE(data));
+ PSR_TYPE_L2_CBM, data, ARRAY_SIZE(data));
if ( ret )
break;
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index 18a42f3..cb3f067 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -53,12 +53,12 @@ struct psr_cmt {
struct psr_cmt_l3 l3;
};
-enum cbm_type {
- PSR_CBM_TYPE_L3,
- PSR_CBM_TYPE_L3_CODE,
- PSR_CBM_TYPE_L3_DATA,
- PSR_CBM_TYPE_L2,
- PSR_CBM_TYPE_UNKNOWN,
+enum psr_type {
+ PSR_TYPE_L3_CBM,
+ PSR_TYPE_L3_CODE,
+ PSR_TYPE_L3_DATA,
+ PSR_TYPE_L2_CBM,
+ PSR_TYPE_UNKNOWN,
};
extern struct psr_cmt *psr_cmt;
@@ -72,12 +72,12 @@ int psr_alloc_rmid(struct domain *d);
void psr_free_rmid(struct domain *d);
void psr_ctxt_switch_to(struct domain *d);
-int psr_get_info(unsigned int socket, enum cbm_type type,
+int psr_get_info(unsigned int socket, enum psr_type type,
uint32_t data[], unsigned int array_len);
int psr_get_val(struct domain *d, unsigned int socket,
- uint32_t *val, enum cbm_type type);
+ uint32_t *val, enum psr_type type);
int psr_set_val(struct domain *d, unsigned int socket,
- uint64_t val, enum cbm_type type);
+ uint64_t val, enum psr_type type);
void psr_domain_init(struct domain *d);
void psr_domain_free(struct domain *d);
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 04/16] x86: a few optimizations to psr codes
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (2 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 03/16] x86: rename 'cbm_type' to 'psr_type' to make it general Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 05/16] x86: implement data structure and CPU init flow for MBA Yi Sun
` (12 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch refines psr codes:
1. Change type of 'cat_init_feature' to 'bool' to remove the pointless
returning of error code.
2. Move printk in 'cat_init_feature' to reduce a return path.
3. Define a local variable 'feat_mask' in 'psr_cpu_init' to reduce calling of
'cpuid_count_leaf()'.
4. Change 'PSR_INFO_IDX_CAT_FLAG' to 'PSR_INFO_IDX_CAT_FLAGS'.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v7:
- adjust the check to 'cat_init_feature' in 'psr_cpu_init'.
(suggested by Jan Beulich)
- change 'PSR_INFO_IDX_CAT_FLAG' to 'PSR_INFO_IDX_CAT_FLAGS'.
(suggested by Jan Beulich)
v6:
- restore 'write_msr()' type to 'void'.
(suggested by Jan Beulich and Roger Pau Monné)
- change 'ebx' in 'psr_cpu_init' to 'feat_mask'.
(suggested by Jan Beulich and Roger Pau Monné)
v5:
- create this patch to make codes clearer.
(suggested by Jan Beulich and Roger Pau Monné)
---
xen/arch/x86/psr.c | 45 ++++++++++++++++++++++-----------------------
xen/arch/x86/sysctl.c | 4 ++--
xen/include/asm-x86/psr.h | 2 +-
3 files changed, 25 insertions(+), 26 deletions(-)
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 7d8295e..58d203f 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -273,10 +273,10 @@ static bool psr_check_cbm(unsigned int cbm_len, unsigned long cbm)
}
/* CAT common functions implementation. */
-static int cat_init_feature(const struct cpuid_leaf *regs,
- struct feat_node *feat,
- struct psr_socket_info *info,
- enum psr_feat_type type)
+static bool cat_init_feature(const struct cpuid_leaf *regs,
+ struct feat_node *feat,
+ struct psr_socket_info *info,
+ enum psr_feat_type type)
{
const char *const cat_feat_name[FEAT_TYPE_NUM] = {
[FEAT_TYPE_L3_CAT] = "L3 CAT",
@@ -286,7 +286,7 @@ static int cat_init_feature(const struct cpuid_leaf *regs,
/* No valid value so do not enable feature. */
if ( !regs->a || !regs->d )
- return -ENOENT;
+ return false;
feat->cbm_len = (regs->a & CAT_CBM_LEN_MASK) + 1;
feat->cos_max = min(opt_cos_max, regs->d & CAT_COS_MAX_MASK);
@@ -296,7 +296,7 @@ static int cat_init_feature(const struct cpuid_leaf *regs,
case FEAT_TYPE_L3_CAT:
case FEAT_TYPE_L2_CAT:
if ( feat->cos_max < 1 )
- return -ENOENT;
+ return false;
/* We reserve cos=0 as default cbm (all bits within cbm_len are 1). */
feat->cos_reg_val[0] = cat_default_val(feat->cbm_len);
@@ -313,7 +313,7 @@ static int cat_init_feature(const struct cpuid_leaf *regs,
uint64_t val;
if ( feat->cos_max < 3 )
- return -ENOENT;
+ return false;
/* Cut half of cos_max when CDP is enabled. */
feat->cos_max = (feat->cos_max - 1) >> 1;
@@ -332,20 +332,18 @@ static int cat_init_feature(const struct cpuid_leaf *regs,
}
default:
- return -ENOENT;
+ return false;
}
/* Add this feature into array. */
info->features[type] = feat;
- if ( !opt_cpu_info )
- return 0;
-
- printk(XENLOG_INFO "%s: enabled on socket %u, cos_max:%u, cbm_len:%u\n",
- cat_feat_name[type], cpu_to_socket(smp_processor_id()),
- feat->cos_max, feat->cbm_len);
+ if ( opt_cpu_info )
+ printk(XENLOG_INFO "%s: enabled on socket %u, cos_max:%u, cbm_len:%u\n",
+ cat_feat_name[type], cpu_to_socket(smp_processor_id()),
+ feat->cos_max, feat->cbm_len);
- return 0;
+ return true;
}
static bool cat_get_feat_info(const struct feat_node *feat,
@@ -356,7 +354,7 @@ static bool cat_get_feat_info(const struct feat_node *feat,
data[PSR_INFO_IDX_COS_MAX] = feat->cos_max;
data[PSR_INFO_IDX_CAT_CBM_LEN] = feat->cbm_len;
- data[PSR_INFO_IDX_CAT_FLAG] = 0;
+ data[PSR_INFO_IDX_CAT_FLAGS] = 0;
return true;
}
@@ -383,7 +381,7 @@ static bool l3_cdp_get_feat_info(const struct feat_node *feat,
if ( !cat_get_feat_info(feat, data, array_len) )
return false;
- data[PSR_INFO_IDX_CAT_FLAG] |= XEN_SYSCTL_PSR_CAT_L3_CDP;
+ data[PSR_INFO_IDX_CAT_FLAGS] |= XEN_SYSCTL_PSR_CAT_L3_CDP;
return true;
}
@@ -1413,6 +1411,7 @@ static void psr_cpu_init(void)
unsigned int socket, cpu = smp_processor_id();
struct feat_node *feat;
struct cpuid_leaf regs;
+ uint32_t feat_mask;
if ( !psr_alloc_feat_enabled() || !boot_cpu_has(X86_FEATURE_PQE) )
goto assoc_init;
@@ -1431,7 +1430,8 @@ static void psr_cpu_init(void)
spin_lock_init(&info->ref_lock);
cpuid_count_leaf(PSR_CPUID_LEVEL_CAT, 0, ®s);
- if ( regs.b & PSR_RESOURCE_TYPE_L3 )
+ feat_mask = regs.b;
+ if ( feat_mask & PSR_RESOURCE_TYPE_L3 )
{
cpuid_count_leaf(PSR_CPUID_LEVEL_CAT, 1, ®s);
@@ -1439,27 +1439,26 @@ static void psr_cpu_init(void)
feat_l3 = NULL;
if ( (regs.c & PSR_CAT_CDP_CAPABILITY) && (opt_psr & PSR_CDP) &&
- !cat_init_feature(®s, feat, info, FEAT_TYPE_L3_CDP) )
+ cat_init_feature(®s, feat, info, FEAT_TYPE_L3_CDP) )
feat_props[FEAT_TYPE_L3_CDP] = &l3_cdp_props;
/* If CDP init fails, try to work as L3 CAT. */
if ( !feat_props[FEAT_TYPE_L3_CDP] )
{
- if ( !cat_init_feature(®s, feat, info, FEAT_TYPE_L3_CAT) )
+ if ( cat_init_feature(®s, feat, info, FEAT_TYPE_L3_CAT) )
feat_props[FEAT_TYPE_L3_CAT] = &l3_cat_props;
else
feat_l3 = feat;
}
}
- cpuid_count_leaf(PSR_CPUID_LEVEL_CAT, 0, ®s);
- if ( regs.b & PSR_RESOURCE_TYPE_L2 )
+ if ( feat_mask & PSR_RESOURCE_TYPE_L2 )
{
cpuid_count_leaf(PSR_CPUID_LEVEL_CAT, 2, ®s);
feat = feat_l2_cat;
feat_l2_cat = NULL;
- if ( !cat_init_feature(®s, feat, info, FEAT_TYPE_L2_CAT) )
+ if ( cat_init_feature(®s, feat, info, FEAT_TYPE_L2_CAT) )
feat_props[FEAT_TYPE_L2_CAT] = &l2_cat_props;
else
feat_l2_cat = feat;
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 6867ee1..6d48cac 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -188,7 +188,7 @@ long arch_do_sysctl(
sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
sysctl->u.psr_alloc.u.cat_info.flags =
- data[PSR_INFO_IDX_CAT_FLAG];
+ data[PSR_INFO_IDX_CAT_FLAGS];
if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
@@ -207,7 +207,7 @@ long arch_do_sysctl(
sysctl->u.psr_alloc.u.cat_info.cbm_len =
data[PSR_INFO_IDX_CAT_CBM_LEN];
sysctl->u.psr_alloc.u.cat_info.flags =
- data[PSR_INFO_IDX_CAT_FLAG];
+ data[PSR_INFO_IDX_CAT_FLAGS];
if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
ret = -EFAULT;
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index cb3f067..f151fa7 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -37,7 +37,7 @@
/* Used by psr_get_info() */
#define PSR_INFO_IDX_COS_MAX 0
#define PSR_INFO_IDX_CAT_CBM_LEN 1
-#define PSR_INFO_IDX_CAT_FLAG 2
+#define PSR_INFO_IDX_CAT_FLAGS 2
#define PSR_INFO_ARRAY_SIZE 3
struct psr_cmt_l3 {
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 05/16] x86: implement data structure and CPU init flow for MBA
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (3 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 04/16] x86: a few optimizations to psr codes Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 06/16] x86: implement get hw info " Yi Sun
` (11 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch implements main data structures of MBA.
Like CAT features, MBA HW info has cos_max which means the max thrtl
register number, and thrtl_max which means the max throttle value
(delay value). It also has a flag to represent if the throttle
value is linear or non-linear.
One thrtl register of MBA stores a throttle value for one or more
domains. The throttle value means the delay applied to traffic between
L2 cache and next cache level.
This patch also implements init flow for MBA and register stub
callback functions.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v8:
- remove unnecessary line split.
(suggested by Jan Beulich)
- use MASK_EXTR().
(suggested by Jan Beulich)
v7:
- modify commit message.
(suggested by Jan Beulich)
- move the changes about check of 'cat_init_feature' in 'psr_cpu_init'
into previous patch.
(suggested by Jan Beulich)
v6:
- restore type of 'mba_write_msr' to 'void'.
v5:
- move out some CAT codes optimization to a new patch.
(suggested by Jan Beulich)
- modify commit message.
(suggested by Jan Beulich)
- change print type of 'linear' to be %d.
(suggested by Jan Beulich)
- change type of 'mba_write_msr' to uint32_t.
- move printk in 'mba_init_feature' to reduce one return path.
(suggested by Roger Pau Monné)
- move the MBA format string in printk to a new line.
(suggested by Roger Pau Monné)
v4:
- modify commit message.
(suggested by Roger Pau Monné)
- fix a comment.
(suggested by Roger Pau Monné)
- join two checks in a single if.
(suggested by Roger Pau Monné)
- remove redundant initialization of 'feat->cos_reg_val[0]'.
(suggested by Roger Pau Monné)
- change 'reg_b' to 'ebx'.
(suggested by Jan Beulich)
- change type of 'mba_init_feature' from 'int' to 'bool'.
(suggested by Roger Pau Monné)
- change type of 'cat_init_feature' from 'int' to 'bool'.
v3:
- replace 'psr_val_type' to 'psr_type'. Also, change 'PSR_VAL_TYPE_MBA' to
'PSR_TYPE_MBA_THRTL'.
(suggested by Roger Pau Monné)
- replace 'MBA_LINEAR' to 'MBA_LINEAR_MASK' to make the name more clear.
(suggested by Roger Pau Monné)
- replase 'cat_info'/'mba_info' to 'cat'/'mba' to make the names shorter.
(suggested by Roger Pau Monné)
- change type of 'linear' to 'bool'.
(suggested by Roger Pau Monné)
- make format string of printf in one line.
(suggested by Roger Pau Monné)
v2:
- modify commit message to replace 'cos register' to 'thrtl register' to
make it accurate.
(suggested by Chao Peng)
- restore the place of the sentence to assign value to 'feat->cbm_len'
because the MBA init flow is splitted out as a separate function in v1.
(suggested by Chao Peng)
- add comment to explain what the MBA thrtl defaul value '0' stands for.
(suggested by Chao Peng)
- check 'thrtl_max' under linear mode. It could not be euqal or larger than
100.
(suggested by Chao Peng)
v1:
- rebase codes onto L2 CAT v15.
- move comment to appropriate place.
(suggested by Chao Peng)
- implement 'mba_init_feature' and keep 'cat_init_feature'.
(suggested by Chao Peng)
- keep 'regs.b' into a local variable to avoid reading CPUID every time.
(suggested by Chao Peng)
---
xen/arch/x86/psr.c | 127 +++++++++++++++++++++++++++++++++++-----
xen/include/asm-x86/msr-index.h | 1 +
xen/include/asm-x86/psr.h | 2 +
3 files changed, 114 insertions(+), 16 deletions(-)
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 58d203f..872bade 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -27,13 +27,16 @@
* - CMT Cache Monitoring Technology
* - COS/CLOS Class of Service. Also mean COS registers.
* - COS_MAX Max number of COS for the feature (minus 1)
+ * - MBA Memory Bandwidth Allocation
* - MSRs Machine Specific Registers
* - PSR Intel Platform Shared Resource
+ * - THRTL_MAX Max throttle value (delay value) of MBA
*/
#define PSR_CMT (1u << 0)
#define PSR_CAT (1u << 1)
#define PSR_CDP (1u << 2)
+#define PSR_MBA (1u << 3)
#define CAT_CBM_LEN_MASK 0x1f
#define CAT_COS_MAX_MASK 0xffff
@@ -60,10 +63,14 @@
*/
#define MAX_COS_NUM 2
+#define MBA_LINEAR_MASK (1u << 2)
+#define MBA_THRTL_MAX_MASK 0xfff
+
enum psr_feat_type {
FEAT_TYPE_L3_CAT,
FEAT_TYPE_L3_CDP,
FEAT_TYPE_L2_CAT,
+ FEAT_TYPE_MBA,
FEAT_TYPE_NUM,
FEAT_TYPE_UNKNOWN,
};
@@ -71,7 +78,6 @@ enum psr_feat_type {
/*
* This structure represents one feature.
* cos_max - The max COS registers number got through CPUID.
- * cbm_len - The length of CBM got through CPUID.
* cos_reg_val - Array to store the values of COS registers. One entry stores
* the value of one COS register.
* For L3 CAT and L2 CAT, one entry corresponds to one COS_ID.
@@ -80,9 +86,23 @@ enum psr_feat_type {
* cos_reg_val[1] (Code).
*/
struct feat_node {
- /* cos_max and cbm_len are common values for all features so far. */
+ /* cos_max is common among all features so far. */
unsigned int cos_max;
- unsigned int cbm_len;
+
+ /* Feature specific HW info. */
+ union {
+ struct {
+ /* The length of CBM got through CPUID. */
+ unsigned int cbm_len;
+ } cat;
+
+ struct {
+ /* The max throttling value got through CPUID. */
+ unsigned int thrtl_max;
+ bool linear;
+ } mba;
+ };
+
uint32_t cos_reg_val[MAX_COS_REG_CNT];
};
@@ -161,6 +181,7 @@ static DEFINE_PER_CPU(struct psr_assoc, psr_assoc);
*/
static struct feat_node *feat_l3;
static struct feat_node *feat_l2_cat;
+static struct feat_node *feat_mba;
/* Common functions */
#define cat_default_val(len) (0xffffffff >> (32 - (len)))
@@ -272,7 +293,7 @@ static bool psr_check_cbm(unsigned int cbm_len, unsigned long cbm)
return true;
}
-/* CAT common functions implementation. */
+/* Implementation of allocation features' functions. */
static bool cat_init_feature(const struct cpuid_leaf *regs,
struct feat_node *feat,
struct psr_socket_info *info,
@@ -288,8 +309,8 @@ static bool cat_init_feature(const struct cpuid_leaf *regs,
if ( !regs->a || !regs->d )
return false;
- feat->cbm_len = (regs->a & CAT_CBM_LEN_MASK) + 1;
feat->cos_max = min(opt_cos_max, regs->d & CAT_COS_MAX_MASK);
+ feat->cat.cbm_len = (regs->a & CAT_CBM_LEN_MASK) + 1;
switch ( type )
{
@@ -299,12 +320,12 @@ static bool cat_init_feature(const struct cpuid_leaf *regs,
return false;
/* We reserve cos=0 as default cbm (all bits within cbm_len are 1). */
- feat->cos_reg_val[0] = cat_default_val(feat->cbm_len);
+ feat->cos_reg_val[0] = cat_default_val(feat->cat.cbm_len);
wrmsrl((type == FEAT_TYPE_L3_CAT ?
MSR_IA32_PSR_L3_MASK(0) :
MSR_IA32_PSR_L2_MASK(0)),
- cat_default_val(feat->cbm_len));
+ cat_default_val(feat->cat.cbm_len));
break;
@@ -319,11 +340,11 @@ static bool cat_init_feature(const struct cpuid_leaf *regs,
feat->cos_max = (feat->cos_max - 1) >> 1;
/* We reserve cos=0 as default cbm (all bits within cbm_len are 1). */
- get_cdp_code(feat, 0) = cat_default_val(feat->cbm_len);
- get_cdp_data(feat, 0) = cat_default_val(feat->cbm_len);
+ get_cdp_code(feat, 0) = cat_default_val(feat->cat.cbm_len);
+ get_cdp_data(feat, 0) = cat_default_val(feat->cat.cbm_len);
- wrmsrl(MSR_IA32_PSR_L3_MASK(0), cat_default_val(feat->cbm_len));
- wrmsrl(MSR_IA32_PSR_L3_MASK(1), cat_default_val(feat->cbm_len));
+ wrmsrl(MSR_IA32_PSR_L3_MASK(0), cat_default_val(feat->cat.cbm_len));
+ wrmsrl(MSR_IA32_PSR_L3_MASK(1), cat_default_val(feat->cat.cbm_len));
rdmsrl(MSR_IA32_PSR_L3_QOS_CFG, val);
wrmsrl(MSR_IA32_PSR_L3_QOS_CFG,
val | (1ull << PSR_L3_QOS_CDP_ENABLE_BIT));
@@ -341,7 +362,44 @@ static bool cat_init_feature(const struct cpuid_leaf *regs,
if ( opt_cpu_info )
printk(XENLOG_INFO "%s: enabled on socket %u, cos_max:%u, cbm_len:%u\n",
cat_feat_name[type], cpu_to_socket(smp_processor_id()),
- feat->cos_max, feat->cbm_len);
+ feat->cos_max, feat->cat.cbm_len);
+
+ return true;
+}
+
+static bool mba_init_feature(const struct cpuid_leaf *regs,
+ struct feat_node *feat,
+ struct psr_socket_info *info,
+ enum psr_feat_type type)
+{
+ /* No valid value so do not enable feature. */
+ if ( !regs->a || !regs->d || type != FEAT_TYPE_MBA )
+ return false;
+
+ feat->cos_max = min(opt_cos_max, MASK_EXTR(regs->d, CAT_COS_MAX_MASK));
+ if ( feat->cos_max < 1 )
+ return false;
+
+ feat->mba.thrtl_max = MASK_EXTR(regs->a, MBA_THRTL_MAX_MASK) + 1;
+
+ if ( regs->c & MBA_LINEAR_MASK )
+ {
+ feat->mba.linear = true;
+
+ if ( feat->mba.thrtl_max >= 100 )
+ return false;
+ }
+
+ wrmsrl(MSR_IA32_PSR_MBA_MASK(0), 0);
+
+ /* Add this feature into array. */
+ info->features[type] = feat;
+
+ if ( opt_cpu_info )
+ printk(XENLOG_INFO
+ "MBA: enabled on socket %u, cos_max:%u, thrtl_max:%u, linear:%d\n",
+ cpu_to_socket(smp_processor_id()),
+ feat->cos_max, feat->mba.thrtl_max, feat->mba.linear);
return true;
}
@@ -353,7 +411,7 @@ static bool cat_get_feat_info(const struct feat_node *feat,
return false;
data[PSR_INFO_IDX_COS_MAX] = feat->cos_max;
- data[PSR_INFO_IDX_CAT_CBM_LEN] = feat->cbm_len;
+ data[PSR_INFO_IDX_CAT_CBM_LEN] = feat->cat.cbm_len;
data[PSR_INFO_IDX_CAT_FLAGS] = 0;
return true;
@@ -419,6 +477,26 @@ static const struct feat_props l2_cat_props = {
.write_msr = l2_cat_write_msr,
};
+/* MBA props */
+static bool mba_get_feat_info(const struct feat_node *feat,
+ uint32_t data[], unsigned int array_len)
+{
+ return false;
+}
+
+static void mba_write_msr(unsigned int cos, uint32_t val,
+ enum psr_type type)
+{
+}
+
+static const struct feat_props mba_props = {
+ .cos_num = 1,
+ .type[0] = PSR_TYPE_MBA_THRTL,
+ .alt_type = PSR_TYPE_UNKNOWN,
+ .get_feat_info = mba_get_feat_info,
+ .write_msr = mba_write_msr,
+};
+
static bool __init parse_psr_bool(const char *s, const char *delim,
const char *ss, const char *feature,
unsigned int mask)
@@ -477,7 +555,8 @@ static int __init parse_psr_param(const char *s)
}
else if ( !parse_psr_bool(s, val_delim, ss, "cmt", PSR_CMT) &&
!parse_psr_bool(s, val_delim, ss, "cat", PSR_CAT) &&
- !parse_psr_bool(s, val_delim, ss, "cdp", PSR_CDP) )
+ !parse_psr_bool(s, val_delim, ss, "cdp", PSR_CDP) &&
+ !parse_psr_bool(s, val_delim, ss, "mba", PSR_MBA) )
rc = -EINVAL;
s = ss + 1;
@@ -881,7 +960,7 @@ static int insert_val_into_array(uint32_t val[],
if ( array_len < props->cos_num )
return -ENOSPC;
- if ( !psr_check_cbm(feat->cbm_len, new_val) )
+ if ( !psr_check_cbm(feat->cat.cbm_len, new_val) )
return -EINVAL;
/*
@@ -1402,6 +1481,10 @@ static int psr_cpu_prepare(void)
(feat_l2_cat = xzalloc(struct feat_node)) == NULL )
return -ENOMEM;
+ if ( feat_mba == NULL &&
+ (feat_mba = xzalloc(struct feat_node)) == NULL )
+ return -ENOMEM;
+
return 0;
}
@@ -1464,6 +1547,18 @@ static void psr_cpu_init(void)
feat_l2_cat = feat;
}
+ if ( feat_mask & PSR_RESOURCE_TYPE_MBA )
+ {
+ cpuid_count_leaf(PSR_CPUID_LEVEL_CAT, 3, ®s);
+
+ feat = feat_mba;
+ feat_mba = NULL;
+ if ( mba_init_feature(®s, feat, info, FEAT_TYPE_MBA) )
+ feat_props[FEAT_TYPE_MBA] = &mba_props;
+ else
+ feat_mba = feat;
+ }
+
info->feat_init = true;
assoc_init:
@@ -1523,7 +1618,7 @@ static int __init psr_presmp_init(void)
if ( (opt_psr & PSR_CMT) && opt_rmid_max )
init_psr_cmt(opt_rmid_max);
- if ( opt_psr & (PSR_CAT | PSR_CDP) )
+ if ( opt_psr & (PSR_CAT | PSR_CDP | PSR_MBA) )
init_psr();
if ( psr_cpu_prepare() )
diff --git a/xen/include/asm-x86/msr-index.h b/xen/include/asm-x86/msr-index.h
index b99c623..a834f3b 100644
--- a/xen/include/asm-x86/msr-index.h
+++ b/xen/include/asm-x86/msr-index.h
@@ -348,6 +348,7 @@
#define MSR_IA32_PSR_L3_MASK_CODE(n) (0x00000c90 + (n) * 2 + 1)
#define MSR_IA32_PSR_L3_MASK_DATA(n) (0x00000c90 + (n) * 2)
#define MSR_IA32_PSR_L2_MASK(n) (0x00000d10 + (n))
+#define MSR_IA32_PSR_MBA_MASK(n) (0x00000d50 + (n))
/* Intel Model 6 */
#define MSR_P6_PERFCTR(n) (0x000000c1 + (n))
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index f151fa7..3cf544a 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -24,6 +24,7 @@
/* Resource Type Enumeration */
#define PSR_RESOURCE_TYPE_L3 0x2
#define PSR_RESOURCE_TYPE_L2 0x4
+#define PSR_RESOURCE_TYPE_MBA 0x8
/* L3 Monitoring Features */
#define PSR_CMT_L3_OCCUPANCY 0x1
@@ -58,6 +59,7 @@ enum psr_type {
PSR_TYPE_L3_CODE,
PSR_TYPE_L3_DATA,
PSR_TYPE_L2_CBM,
+ PSR_TYPE_MBA_THRTL,
PSR_TYPE_UNKNOWN,
};
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 06/16] x86: implement get hw info flow for MBA
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (4 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 05/16] x86: implement data structure and CPU init flow for MBA Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-12-15 10:09 ` Jan Beulich
2017-12-18 8:30 ` [PATCH v9.1 " Yi Sun
2017-10-20 8:28 ` [PATCH v9 07/16] x86: implement get value interface " Yi Sun
` (10 subsequent siblings)
16 siblings, 2 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch implements get HW info flow for MBA including its callback
function and sysctl interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v7:
- change 'PSR_INFO_IDX_MBA_FLAG' to 'PSR_INFO_IDX_MBA_FLAGS'.
(suggested by Jan Beulich)
v5:
- use ASSERT in 'mba_get_feat_info'.
(suggested by Roger Pau Monné)
- correct initialization format of 'data[PSR_INFO_ARRAY_SIZE]'.
(suggested by Roger Pau Monné and Jan Beulich)
v4:
- remove 'ALLOC_' from macro names.
(suggested by Roger Pau Monné)
- initialize 'data[PSR_INFO_ARRAY_SIZE]' to 0 to prevent to leak stack data.
(suggested by Roger Pau Monné)
v3:
- replace 'PSR_VAL_TYPE_MBA' to 'PSR_TYPE_MBA_THRTL'.
(suggested by Roger Pau Monné)
v2:
- use 'XEN_SYSCTL_PSR_MBA_LINEAR' to set MBA feature HW info.
(suggested by Chao Peng)
v1:
- sort 'PSR_INFO_IDX_' macros as feature.
(suggested by Chao Peng)
- rename 'PSR_INFO_IDX_MBA_LINEAR' to 'PSR_INFO_IDX_MBA_FLAG'.
- rename 'linear' in 'struct mba_info' to 'flags' for future extension.
---
xen/arch/x86/psr.c | 14 +++++++++++++-
xen/arch/x86/sysctl.c | 21 ++++++++++++++++++++-
xen/include/asm-x86/psr.h | 2 ++
xen/include/public/sysctl.h | 8 ++++++++
4 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 872bade..a4901d8 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -263,6 +263,10 @@ static enum psr_feat_type psr_type_to_feat_type(enum psr_type type)
feat_type = FEAT_TYPE_L2_CAT;
break;
+ case PSR_TYPE_MBA_THRTL:
+ feat_type = FEAT_TYPE_MBA;
+ break;
+
default:
ASSERT_UNREACHABLE();
}
@@ -481,7 +485,15 @@ static const struct feat_props l2_cat_props = {
static bool mba_get_feat_info(const struct feat_node *feat,
uint32_t data[], unsigned int array_len)
{
- return false;
+ ASSERT(array_len == PSR_INFO_ARRAY_SIZE);
+
+ data[PSR_INFO_IDX_COS_MAX] = feat->cos_max;
+ data[PSR_INFO_IDX_MBA_THRTL_MAX] = feat->mba.thrtl_max;
+
+ if ( feat->mba.linear )
+ data[PSR_INFO_IDX_MBA_FLAGS] |= XEN_SYSCTL_PSR_MBA_LINEAR;
+
+ return true;
}
static void mba_write_msr(unsigned int cos, uint32_t val,
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 6d48cac..ffad585 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -174,7 +174,7 @@ long arch_do_sysctl(
case XEN_SYSCTL_psr_alloc:
switch ( sysctl->u.psr_alloc.cmd )
{
- uint32_t data[PSR_INFO_ARRAY_SIZE];
+ uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
case XEN_SYSCTL_PSR_get_l3_info:
{
@@ -214,6 +214,25 @@ long arch_do_sysctl(
break;
}
+ case XEN_SYSCTL_PSR_get_mba_info:
+ {
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
+ PSR_TYPE_MBA_THRTL, data, ARRAY_SIZE(data));
+ if ( ret )
+ break;
+
+ sysctl->u.psr_alloc.u.mba_info.cos_max =
+ data[PSR_INFO_IDX_COS_MAX];
+ sysctl->u.psr_alloc.u.mba_info.thrtl_max =
+ data[PSR_INFO_IDX_MBA_THRTL_MAX];
+ sysctl->u.psr_alloc.u.mba_info.flags =
+ data[PSR_INFO_IDX_MBA_FLAGS];
+
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
+ ret = -EFAULT;
+ break;
+ }
+
default:
ret = -EOPNOTSUPP;
break;
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index 3cf544a..c2257da 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -39,6 +39,8 @@
#define PSR_INFO_IDX_COS_MAX 0
#define PSR_INFO_IDX_CAT_CBM_LEN 1
#define PSR_INFO_IDX_CAT_FLAGS 2
+#define PSR_INFO_IDX_MBA_THRTL_MAX 1
+#define PSR_INFO_IDX_MBA_FLAGS 2
#define PSR_INFO_ARRAY_SIZE 3
struct psr_cmt_l3 {
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index a50e345..f7f26c3 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -698,6 +698,7 @@ struct xen_sysctl_pcitopoinfo {
#define XEN_SYSCTL_PSR_get_l3_info 0
#define XEN_SYSCTL_PSR_get_l2_info 1
+#define XEN_SYSCTL_PSR_get_mba_info 2
struct xen_sysctl_psr_alloc {
uint32_t cmd; /* IN: XEN_SYSCTL_PSR_* */
uint32_t target; /* IN */
@@ -708,6 +709,13 @@ struct xen_sysctl_psr_alloc {
#define XEN_SYSCTL_PSR_CAT_L3_CDP (1u << 0)
uint32_t flags; /* OUT: CAT flags */
} cat_info;
+
+ struct {
+ uint32_t thrtl_max; /* OUT: Maximum throttle */
+ uint32_t cos_max; /* OUT: Maximum COS */
+#define XEN_SYSCTL_PSR_MBA_LINEAR (1u << 0)
+ uint32_t flags; /* OUT: MBA flags */
+ } mba_info;
} u;
};
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v9 06/16] x86: implement get hw info flow for MBA
2017-10-20 8:28 ` [PATCH v9 06/16] x86: implement get hw info " Yi Sun
@ 2017-12-15 10:09 ` Jan Beulich
2017-12-18 9:38 ` Yi Sun
2017-12-18 8:30 ` [PATCH v9.1 " Yi Sun
1 sibling, 1 reply; 31+ messages in thread
From: Jan Beulich @ 2017-12-15 10:09 UTC (permalink / raw)
To: Yi Sun; +Cc: Andrew Cooper, xen-devel, Wei Liu, Chao Peng,
Roger Pau Monné
>>> On 20.10.17 at 10:28, <yi.y.sun@linux.intel.com> wrote:
> --- a/xen/arch/x86/sysctl.c
> +++ b/xen/arch/x86/sysctl.c
> @@ -174,7 +174,7 @@ long arch_do_sysctl(
> case XEN_SYSCTL_psr_alloc:
> switch ( sysctl->u.psr_alloc.cmd )
> {
> - uint32_t data[PSR_INFO_ARRAY_SIZE];
> + uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
>
> case XEN_SYSCTL_PSR_get_l3_info:
> {
This validly failed my commit time build check: gcc 7.2 warns about
the code which would be generated would never be executed. I'm
therefore going to push only the first five patches of this series.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v9 06/16] x86: implement get hw info flow for MBA
2017-12-15 10:09 ` Jan Beulich
@ 2017-12-18 9:38 ` Yi Sun
0 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-12-18 9:38 UTC (permalink / raw)
To: Jan Beulich
Cc: Andrew Cooper, xen-devel, Wei Liu, Chao Peng,
Roger Pau Monné
On 17-12-15 03:09:26, Jan Beulich wrote:
> >>> On 20.10.17 at 10:28, <yi.y.sun@linux.intel.com> wrote:
> > --- a/xen/arch/x86/sysctl.c
> > +++ b/xen/arch/x86/sysctl.c
> > @@ -174,7 +174,7 @@ long arch_do_sysctl(
> > case XEN_SYSCTL_psr_alloc:
> > switch ( sysctl->u.psr_alloc.cmd )
> > {
> > - uint32_t data[PSR_INFO_ARRAY_SIZE];
> > + uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
> >
> > case XEN_SYSCTL_PSR_get_l3_info:
> > {
>
> This validly failed my commit time build check: gcc 7.2 warns about
> the code which would be generated would never be executed. I'm
> therefore going to push only the first five patches of this series.
>
Thank you! I have upgraded my gcc to 7.2 and fixed this issue. The new
patch has been sent. All later patches have been compiled successfully
with gcc 7.2. So please go on merging them. Thanks!
> Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v9.1 06/16] x86: implement get hw info flow for MBA
2017-10-20 8:28 ` [PATCH v9 06/16] x86: implement get hw info " Yi Sun
2017-12-15 10:09 ` Jan Beulich
@ 2017-12-18 8:30 ` Yi Sun
2017-12-18 10:21 ` Jan Beulich
1 sibling, 1 reply; 31+ messages in thread
From: Yi Sun @ 2017-12-18 8:30 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch implements get HW info flow for MBA including its callback
function and sysctl interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v9.1:
- declare data array in every case to avoid gcc 7.2 warning.
(found by Jan Beulich)
v7:
- change 'PSR_INFO_IDX_MBA_FLAG' to 'PSR_INFO_IDX_MBA_FLAGS'.
(suggested by Jan Beulich)
v5:
- use ASSERT in 'mba_get_feat_info'.
(suggested by Roger Pau Monné)
- correct initialization format of 'data[PSR_INFO_ARRAY_SIZE]'.
(suggested by Roger Pau Monné and Jan Beulich)
v4:
- remove 'ALLOC_' from macro names.
(suggested by Roger Pau Monné)
- initialize 'data[PSR_INFO_ARRAY_SIZE]' to 0 to prevent to leak stack data.
(suggested by Roger Pau Monné)
v3:
- replace 'PSR_VAL_TYPE_MBA' to 'PSR_TYPE_MBA_THRTL'.
(suggested by Roger Pau Monné)
v2:
- use 'XEN_SYSCTL_PSR_MBA_LINEAR' to set MBA feature HW info.
(suggested by Chao Peng)
v1:
- sort 'PSR_INFO_IDX_' macros as feature.
(suggested by Chao Peng)
- rename 'PSR_INFO_IDX_MBA_LINEAR' to 'PSR_INFO_IDX_MBA_FLAG'.
- rename 'linear' in 'struct mba_info' to 'flags' for future extension.
---
Config.mk | 20 ++++++++++----------
xen/arch/x86/psr.c | 14 +++++++++++++-
xen/arch/x86/sysctl.c | 27 +++++++++++++++++++++++++--
xen/include/asm-x86/psr.h | 2 ++
xen/include/public/sysctl.h | 8 ++++++++
5 files changed, 58 insertions(+), 13 deletions(-)
diff --git a/Config.mk b/Config.mk
index 51adc27..18f5c34 100644
--- a/Config.mk
+++ b/Config.mk
@@ -260,17 +260,17 @@ QEMU_TRADITIONAL_REVISION ?= $(QEMU_TAG)
endif
ifeq ($(GIT_HTTP),y)
-OVMF_UPSTREAM_URL ?= http://xenbits.xen.org/git-http/ovmf.git
-QEMU_UPSTREAM_URL ?= http://xenbits.xen.org/git-http/qemu-xen.git
-QEMU_TRADITIONAL_URL ?= http://xenbits.xen.org/git-http/qemu-xen-traditional.git
-SEABIOS_UPSTREAM_URL ?= http://xenbits.xen.org/git-http/seabios.git
-MINIOS_UPSTREAM_URL ?= http://xenbits.xen.org/git-http/mini-os.git
+OVMF_UPSTREAM_URL ?= http://vt-sync.sh.intel.com/git-http/ovmf.git
+QEMU_UPSTREAM_URL ?= http://vt-sync.sh.intel.com/git-http/qemu-xen.git
+QEMU_TRADITIONAL_URL ?= http://vt-sync.sh.intel.com/git-http/qemu-xen-traditional.git
+SEABIOS_UPSTREAM_URL ?= http://vt-sync.sh.intel.com/git-http/seabios.git
+MINIOS_UPSTREAM_URL ?= http://vt-sync.sh.intel.com/git-http/mini-os.git
else
-OVMF_UPSTREAM_URL ?= git://xenbits.xen.org/ovmf.git
-QEMU_UPSTREAM_URL ?= git://xenbits.xen.org/qemu-xen.git
-QEMU_TRADITIONAL_URL ?= git://xenbits.xen.org/qemu-xen-traditional.git
-SEABIOS_UPSTREAM_URL ?= git://xenbits.xen.org/seabios.git
-MINIOS_UPSTREAM_URL ?= git://xenbits.xen.org/mini-os.git
+OVMF_UPSTREAM_URL ?= git://vt-sync.sh.intel.com/ovmf.git
+QEMU_UPSTREAM_URL ?= git://vt-sync.sh.intel.com/qemu-xen.git
+QEMU_TRADITIONAL_URL ?= git://vt-sync.sh.intel.com/qemu-xen-traditional.git
+SEABIOS_UPSTREAM_URL ?= git://vt-sync.sh.intel.com/seabios.git
+MINIOS_UPSTREAM_URL ?= git://vt-sync.sh.intel.com/mini-os.git
endif
OVMF_UPSTREAM_REVISION ?= 947f3737abf65fda63f3ffd97fddfa6986986868
QEMU_UPSTREAM_REVISION ?= master
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index 872bade..a4901d8 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -263,6 +263,10 @@ static enum psr_feat_type psr_type_to_feat_type(enum psr_type type)
feat_type = FEAT_TYPE_L2_CAT;
break;
+ case PSR_TYPE_MBA_THRTL:
+ feat_type = FEAT_TYPE_MBA;
+ break;
+
default:
ASSERT_UNREACHABLE();
}
@@ -481,7 +485,15 @@ static const struct feat_props l2_cat_props = {
static bool mba_get_feat_info(const struct feat_node *feat,
uint32_t data[], unsigned int array_len)
{
- return false;
+ ASSERT(array_len == PSR_INFO_ARRAY_SIZE);
+
+ data[PSR_INFO_IDX_COS_MAX] = feat->cos_max;
+ data[PSR_INFO_IDX_MBA_THRTL_MAX] = feat->mba.thrtl_max;
+
+ if ( feat->mba.linear )
+ data[PSR_INFO_IDX_MBA_FLAGS] |= XEN_SYSCTL_PSR_MBA_LINEAR;
+
+ return true;
}
static void mba_write_msr(unsigned int cos, uint32_t val,
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index 6d48cac..22f8d76 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -174,10 +174,10 @@ long arch_do_sysctl(
case XEN_SYSCTL_psr_alloc:
switch ( sysctl->u.psr_alloc.cmd )
{
- uint32_t data[PSR_INFO_ARRAY_SIZE];
-
case XEN_SYSCTL_PSR_get_l3_info:
{
+ uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
+
ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_TYPE_L3_CBM, data, ARRAY_SIZE(data));
if ( ret )
@@ -197,6 +197,8 @@ long arch_do_sysctl(
case XEN_SYSCTL_PSR_get_l2_info:
{
+ uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
+
ret = psr_get_info(sysctl->u.psr_alloc.target,
PSR_TYPE_L2_CBM, data, ARRAY_SIZE(data));
if ( ret )
@@ -214,6 +216,27 @@ long arch_do_sysctl(
break;
}
+ case XEN_SYSCTL_PSR_get_mba_info:
+ {
+ uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
+
+ ret = psr_get_info(sysctl->u.psr_alloc.target,
+ PSR_TYPE_MBA_THRTL, data, ARRAY_SIZE(data));
+ if ( ret )
+ break;
+
+ sysctl->u.psr_alloc.u.mba_info.cos_max =
+ data[PSR_INFO_IDX_COS_MAX];
+ sysctl->u.psr_alloc.u.mba_info.thrtl_max =
+ data[PSR_INFO_IDX_MBA_THRTL_MAX];
+ sysctl->u.psr_alloc.u.mba_info.flags =
+ data[PSR_INFO_IDX_MBA_FLAGS];
+
+ if ( __copy_field_to_guest(u_sysctl, sysctl, u.psr_alloc) )
+ ret = -EFAULT;
+ break;
+ }
+
default:
ret = -EOPNOTSUPP;
break;
diff --git a/xen/include/asm-x86/psr.h b/xen/include/asm-x86/psr.h
index 3cf544a..c2257da 100644
--- a/xen/include/asm-x86/psr.h
+++ b/xen/include/asm-x86/psr.h
@@ -39,6 +39,8 @@
#define PSR_INFO_IDX_COS_MAX 0
#define PSR_INFO_IDX_CAT_CBM_LEN 1
#define PSR_INFO_IDX_CAT_FLAGS 2
+#define PSR_INFO_IDX_MBA_THRTL_MAX 1
+#define PSR_INFO_IDX_MBA_FLAGS 2
#define PSR_INFO_ARRAY_SIZE 3
struct psr_cmt_l3 {
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index a50e345..f7f26c3 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -698,6 +698,7 @@ struct xen_sysctl_pcitopoinfo {
#define XEN_SYSCTL_PSR_get_l3_info 0
#define XEN_SYSCTL_PSR_get_l2_info 1
+#define XEN_SYSCTL_PSR_get_mba_info 2
struct xen_sysctl_psr_alloc {
uint32_t cmd; /* IN: XEN_SYSCTL_PSR_* */
uint32_t target; /* IN */
@@ -708,6 +709,13 @@ struct xen_sysctl_psr_alloc {
#define XEN_SYSCTL_PSR_CAT_L3_CDP (1u << 0)
uint32_t flags; /* OUT: CAT flags */
} cat_info;
+
+ struct {
+ uint32_t thrtl_max; /* OUT: Maximum throttle */
+ uint32_t cos_max; /* OUT: Maximum COS */
+#define XEN_SYSCTL_PSR_MBA_LINEAR (1u << 0)
+ uint32_t flags; /* OUT: MBA flags */
+ } mba_info;
} u;
};
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v9.1 06/16] x86: implement get hw info flow for MBA
2017-12-18 8:30 ` [PATCH v9.1 " Yi Sun
@ 2017-12-18 10:21 ` Jan Beulich
0 siblings, 0 replies; 31+ messages in thread
From: Jan Beulich @ 2017-12-18 10:21 UTC (permalink / raw)
To: Yi Sun; +Cc: Andrew Cooper, xen-devel, Wei Liu, Chao Peng,
Roger Pau Monné
>>> On 18.12.17 at 09:30, <yi.y.sun@linux.intel.com> wrote:
> This patch implements get HW info flow for MBA including its callback
> function and sysctl interface.
>
> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
> Acked-by: Jan Beulich <jbeulich@suse.com>
As said before (a number of times I think), tags need to be dropped
when you fix bugs. This imo similarly applies to the 9.1 tools patch.
> --- a/xen/arch/x86/sysctl.c
> +++ b/xen/arch/x86/sysctl.c
> @@ -174,10 +174,10 @@ long arch_do_sysctl(
> case XEN_SYSCTL_psr_alloc:
> switch ( sysctl->u.psr_alloc.cmd )
> {
> - uint32_t data[PSR_INFO_ARRAY_SIZE];
> -
> case XEN_SYSCTL_PSR_get_l3_info:
> {
> + uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
> +
> ret = psr_get_info(sysctl->u.psr_alloc.target,
> PSR_TYPE_L3_CBM, data, ARRAY_SIZE(data));
> if ( ret )
> @@ -197,6 +197,8 @@ long arch_do_sysctl(
>
> case XEN_SYSCTL_PSR_get_l2_info:
> {
> + uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
> +
> ret = psr_get_info(sysctl->u.psr_alloc.target,
> PSR_TYPE_L2_CBM, data, ARRAY_SIZE(data));
> if ( ret )
> @@ -214,6 +216,27 @@ long arch_do_sysctl(
> break;
> }
>
> + case XEN_SYSCTL_PSR_get_mba_info:
> + {
> + uint32_t data[PSR_INFO_ARRAY_SIZE] = { };
Please avoid such redundancy - move the declaration _out_ by one
scope (into one to be introduced at the case XEN_SYSCTL_psr_alloc
level) instead. I'd also appreciate if you cleaned up the pointless
braces which patch context above shows.
Also please re-send the whole remaining part of the series.
Together with there already having been a 9.1 for some other
patch in the series, I'd really like to see a clean v10 instead.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v9 07/16] x86: implement get value interface for MBA
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (5 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 06/16] x86: implement get hw info " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 08/16] x86: implement set value flow " Yi Sun
` (9 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch implements get value domctl interface for MBA.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Jan Beulich <jbeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- use newly defined macro to get MBA thrtl.
(suggested by Roger Pau Monné)
v4:
- remove 'ALLOC_' from macro names.
(suggested by Roger Pau Monné)
v3:
- change 'PSR_VAL_TYPE_MBA' to 'PSR_TYPE_MBA_THRTL'.
(suggested by Roger Pau Monné)
---
xen/arch/x86/domctl.c | 4 ++++
xen/include/public/domctl.h | 1 +
2 files changed, 5 insertions(+)
diff --git a/xen/arch/x86/domctl.c b/xen/arch/x86/domctl.c
index ddd3b6d..f7d299d 100644
--- a/xen/arch/x86/domctl.c
+++ b/xen/arch/x86/domctl.c
@@ -1491,6 +1491,10 @@ long arch_do_domctl(
ret = domctl_psr_get_val(d, domctl, PSR_TYPE_L2_CBM, copyback);
break;
+ case XEN_DOMCTL_PSR_GET_MBA_THRTL:
+ ret = domctl_psr_get_val(d, domctl, PSR_TYPE_MBA_THRTL, copyback);
+ break;
+
#undef domctl_psr_get_val
default:
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index eaff9b3..44cf0b5 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -1074,6 +1074,7 @@ struct xen_domctl_psr_alloc {
#define XEN_DOMCTL_PSR_GET_L3_DATA 5
#define XEN_DOMCTL_PSR_SET_L2_CBM 6
#define XEN_DOMCTL_PSR_GET_L2_CBM 7
+#define XEN_DOMCTL_PSR_GET_MBA_THRTL 9
uint32_t cmd; /* IN: XEN_DOMCTL_PSR_* */
uint32_t target; /* IN */
uint64_t data; /* IN/OUT */
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 08/16] x86: implement set value flow for MBA
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (6 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 07/16] x86: implement get value interface " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 09/16] tools: create general interfaces to support psr allocation features Yi Sun
` (8 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Yi Sun, Andrew Cooper, Jan Beulich, Chao Peng,
Roger Pau Monné
This patch implements set value flow for MBA including its callback
function and domctl interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <jbeulich@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v9:
- adjust codes in 'mba_sanitize_thrtl'.
(suggested by Jan Beulich)
v8:
- restore some old codes in 'cat_check_cbm'.
(suggested by Jan Beulich)
- use 'fls()' but not 'flsl()'.
(suggested by Jan Beulich)
- use plain '=' to assign value for thrtl in 'mba_sanitize_thrtl'.
(suggested by Jan Beulich)
v7:
- change name of 'check_val' to 'sanitize'.
(suggested by Jan Beulich)
- fix comments.
(suggested by Jan Beulich)
- add parentheses and change '== 0' to '!'.
(suggested by Jan Beulich)
- remove unnecessary check of 'mba.thrtl_max'.
(suggested by Jan Beulich)
- remove unnecessary intermediate variable 'mod'.
(suggested by Jan Beulich)
- refine an assignement sentence to use '&='.
(suggested by Jan Beulich)
- change type of last parameter of 'sanitize' to 'uint32_t' and
apply same change to 'cat_check_cbm'.
(suggested by Jan Beulich)
v6:
- split co-exist features' values setting flow to a new patch.
(suggested by Jan Beulich)
- restore codes related to 'mba_check_thrtl' and 'check_value'.
(suggested by Jan Beulich)
v5:
- adjust position of 'cat_check_cbm' to not to make changes so big.
(suggested by Roger Pau Monné)
- remove 'props' from 'struct cos_write_info'.
(suggested by Roger Pau Monné)
- make a single return statement in 'mba_check_thrtl'.
(suggested by Jan Beulich)
v4:
- remove 'ALLOC_' from macro names.
(suggested by Roger Pau Monné)
- join two checks into a single if.
(suggested by Roger Pau Monné)
- remove redundant local variable 'array_len'.
(suggested by Roger Pau Monné)
v3:
- modify commit message to make it clear.
(suggested by Roger Pau Monné)
- modify functionality of 'check_val' to make it simple to only check value.
Change the last parameter type from 'unsigned long *' to 'unsigned long'.
(suggested by Roger Pau Monné)
- call rdmsrl to get value just written into MSR for MBA. Because HW can
automatically change input value to what it wants.
(suggested by Roger Pau Monné)
- change type of 'write_msr' to 'uint32_t' to return the value actually
written into MSR. Then, change 'do_write_psr_msrs' to set the returned
value into 'cos_reg_val[]'
- move the declaration of 'j' into loop in 'do_write_psr_msrs'.
(suggested by Roger Pau Monné)
- change 'mba_info' to 'mba'.
(suggested by Roger Pau Monné)
- change 'cat_info' to 'cat'.
(suggested by Roger Pau Monné)
- rename 'psr_cat/PSR_CAT' to 'psr_alloc/PSR_ALLOC' and remove 'op/OP'
from name.
(suggested by Roger Pau Monné)
- change 'PSR_VAL_TYPE_MBA' to 'PSR_TYPE_MBA_THRTL'.
(suggested by Roger Pau Monné)
v2:
- remove linear mode 'thrtl_max' check in 'mba_check_thrtl' because it has
been checked in 'mba_init_feature'.
(suggested by Chao Peng)
- for non-linear mode, check if '*thrtl' is not 0 in 'mba_check_thrtl'. If
it is 0, we do not need to change it.
(suggested by Chao Peng)
- move comments to explain changes of 'cos_write_info' from psr.c to commit
message.
(suggested by Chao Peng)
---
xen/arch/x86/domctl.c | 6 ++++++
xen/arch/x86/psr.c | 46 +++++++++++++++++++++++++++++++++++++++++----
xen/include/public/domctl.h | 1 +
3 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/xen/arch/x86/domctl.c b/xen/arch/x86/domctl.c
index f7d299d..2ae436b 100644
--- a/xen/arch/x86/domctl.c
+++ b/xen/arch/x86/domctl.c
@@ -1465,6 +1465,12 @@ long arch_do_domctl(
PSR_TYPE_L2_CBM);
break;
+ case XEN_DOMCTL_PSR_SET_MBA_THRTL:
+ ret = psr_set_val(d, domctl->u.psr_alloc.target,
+ domctl->u.psr_alloc.data,
+ PSR_TYPE_MBA_THRTL);
+ break;
+
#define domctl_psr_get_val(d, domctl, type, copyback) ({ \
uint32_t v_; \
int r_ = psr_get_val((d), (domctl)->u.psr_alloc.target, \
diff --git a/xen/arch/x86/psr.c b/xen/arch/x86/psr.c
index a4901d8..0ba8ef8 100644
--- a/xen/arch/x86/psr.c
+++ b/xen/arch/x86/psr.c
@@ -138,6 +138,12 @@ static const struct feat_props {
/* write_msr is used to write out feature MSR register. */
void (*write_msr)(unsigned int cos, uint32_t val, enum psr_type type);
+
+ /*
+ * sanitize is used to check if input val fulfills SDM requirement.
+ * And change it to valid value if SDM allows.
+ */
+ bool (*sanitize)(const struct feat_node *feat, uint32_t *val);
} *feat_props[FEAT_TYPE_NUM];
/*
@@ -274,11 +280,14 @@ static enum psr_feat_type psr_type_to_feat_type(enum psr_type type)
return feat_type;
}
-static bool psr_check_cbm(unsigned int cbm_len, unsigned long cbm)
+/* Implementation of allocation features' functions. */
+static bool cat_check_cbm(const struct feat_node *feat, uint32_t *val)
{
unsigned int first_bit, zero_bit;
+ unsigned int cbm_len = feat->cat.cbm_len;
+ unsigned long cbm = *val;
- /* Set bits should only in the range of [0, cbm_len]. */
+ /* Set bits should only in the range of [0, cbm_len). */
if ( cbm & (~0ul << cbm_len) )
return false;
@@ -297,7 +306,6 @@ static bool psr_check_cbm(unsigned int cbm_len, unsigned long cbm)
return true;
}
-/* Implementation of allocation features' functions. */
static bool cat_init_feature(const struct cpuid_leaf *regs,
struct feat_node *feat,
struct psr_socket_info *info,
@@ -434,6 +442,7 @@ static const struct feat_props l3_cat_props = {
.alt_type = PSR_TYPE_UNKNOWN,
.get_feat_info = cat_get_feat_info,
.write_msr = l3_cat_write_msr,
+ .sanitize = cat_check_cbm,
};
/* L3 CDP props */
@@ -464,6 +473,7 @@ static const struct feat_props l3_cdp_props = {
.alt_type = PSR_TYPE_L3_CBM,
.get_feat_info = l3_cdp_get_feat_info,
.write_msr = l3_cdp_write_msr,
+ .sanitize = cat_check_cbm,
};
/* L2 CAT props */
@@ -479,6 +489,7 @@ static const struct feat_props l2_cat_props = {
.alt_type = PSR_TYPE_UNKNOWN,
.get_feat_info = cat_get_feat_info,
.write_msr = l2_cat_write_msr,
+ .sanitize = cat_check_cbm,
};
/* MBA props */
@@ -499,6 +510,32 @@ static bool mba_get_feat_info(const struct feat_node *feat,
static void mba_write_msr(unsigned int cos, uint32_t val,
enum psr_type type)
{
+ wrmsrl(MSR_IA32_PSR_MBA_MASK(cos), val);
+}
+
+static bool mba_sanitize_thrtl(const struct feat_node *feat, uint32_t *thrtl)
+{
+ /*
+ * Per SDM (chapter "Memory Bandwidth Allocation Configuration"):
+ * 1. Linear mode: In the linear mode the input precision is defined
+ * as 100-(MBA_MAX). For instance, if the MBA_MAX value is 90, the
+ * input precision is 10%. Values not an even multiple of the
+ * precision (e.g., 12%) will be rounded down (e.g., to 10% delay
+ * applied).
+ * 2. Non-linear mode: Input delay values are powers-of-two from zero
+ * to the MBA_MAX value from CPUID. In this case any values not a
+ * power of two will be rounded down the next nearest power of two.
+ */
+ if ( feat->mba.linear )
+ *thrtl -= *thrtl % (100 - feat->mba.thrtl_max);
+ else
+ {
+ /* Not power of 2. */
+ if ( *thrtl & (*thrtl - 1) )
+ *thrtl = 1 << (fls(*thrtl) - 1);
+ }
+
+ return *thrtl <= feat->mba.thrtl_max;
}
static const struct feat_props mba_props = {
@@ -507,6 +544,7 @@ static const struct feat_props mba_props = {
.alt_type = PSR_TYPE_UNKNOWN,
.get_feat_info = mba_get_feat_info,
.write_msr = mba_write_msr,
+ .sanitize = mba_sanitize_thrtl,
};
static bool __init parse_psr_bool(const char *s, const char *delim,
@@ -972,7 +1010,7 @@ static int insert_val_into_array(uint32_t val[],
if ( array_len < props->cos_num )
return -ENOSPC;
- if ( !psr_check_cbm(feat->cat.cbm_len, new_val) )
+ if ( !props->sanitize(feat, &new_val) )
return -EINVAL;
/*
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 44cf0b5..6d5396f 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -1074,6 +1074,7 @@ struct xen_domctl_psr_alloc {
#define XEN_DOMCTL_PSR_GET_L3_DATA 5
#define XEN_DOMCTL_PSR_SET_L2_CBM 6
#define XEN_DOMCTL_PSR_GET_L2_CBM 7
+#define XEN_DOMCTL_PSR_SET_MBA_THRTL 8
#define XEN_DOMCTL_PSR_GET_MBA_THRTL 9
uint32_t cmd; /* IN: XEN_DOMCTL_PSR_* */
uint32_t target; /* IN */
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 09/16] tools: create general interfaces to support psr allocation features
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (7 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 08/16] x86: implement set value flow " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 10/16] tools: implement the new libxc get hw info interface Yi Sun
` (7 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch creates general interfaces in libxl to support all psr
allocation features.
Add 'LIBXL_HAVE_PSR_GENERIC' to indicate interface change.
Please note, the functionality cannot work until later patches
are applied.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- adjust parameters position in 'libxl_psr_get_hw_info'.
(suggested by Roger Pau Monné)
v4:
- add description for LIBXL_HAVE_PSR_GENERIC to mention newly added
public functions.
(suggested by Roger Pau Monné)
v3:
- change 'LIBXL_HAVE_PSR_MBA' to 'LIBXL_HAVE_PSR_GENERIC'.
(suggested by Roger Pau Monné)
- 'typedef enum libxl_psr_cbm_type libxl_psr_type;' in libxl.h.
(suggested by Roger Pau Monné and Wei Liu)
- change 'libxl_psr_cbm_type' to 'libxl_psr_type' in newly defined
interfaces.
(suggested by Roger Pau Monné)
v2:
- remove '_INFO' in 'libxl_psr_feat_type' and make corresponding
changes in 'libxl_psr_hw_info'.
(suggested by Chao Peng)
---
tools/libxl/libxl.h | 37 +++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_psr.c | 25 +++++++++++++++++++++++++
tools/libxl/libxl_types.idl | 22 ++++++++++++++++++++++
3 files changed, 84 insertions(+)
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 5e9aed7..da8af81 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -982,6 +982,17 @@ void libxl_mac_copy(libxl_ctx *ctx, libxl_mac *dst, const libxl_mac *src);
#define LIBXL_HAVE_PSR_L2_CAT 1
/*
+ * LIBXL_HAVE_PSR_GENERIC
+ *
+ * If this is defined, the Memory Bandwidth Allocation feature is supported.
+ * The following public functions are available:
+ * libxl_psr_{set/get}_val
+ * libxl_psr_get_hw_info
+ * libxl_psr_hw_info_list_free
+ */
+#define LIBXL_HAVE_PSR_GENERIC 1
+
+/*
* LIBXL_HAVE_MCA_CAPS
*
* If this is defined, setting MCA capabilities for HVM domain is supported.
@@ -2302,6 +2313,32 @@ int libxl_psr_cat_get_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
int libxl_psr_cat_get_l3_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
int *nr);
void libxl_psr_cat_info_list_free(libxl_psr_cat_info *list, int nr);
+
+typedef enum libxl_psr_cbm_type libxl_psr_type;
+
+/*
+ * Function to set a domain's value. It operates on a single or multiple
+ * target(s) defined in 'target_map'. 'target_map' specifies all the sockets
+ * to be operated on.
+ */
+int libxl_psr_set_val(libxl_ctx *ctx, uint32_t domid,
+ libxl_psr_type type, libxl_bitmap *target_map,
+ uint64_t val);
+/*
+ * Function to get a domain's cbm. It operates on a single 'target'.
+ * 'target' specifies which socket to be operated on.
+ */
+int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
+ libxl_psr_type type, unsigned int target,
+ uint64_t *val);
+/*
+ * On success, the function returns an array of elements in 'info',
+ * and the length in 'nr'.
+ */
+int libxl_psr_get_hw_info(libxl_ctx *ctx, libxl_psr_feat_type type,
+ unsigned int lvl, unsigned int *nr,
+ libxl_psr_hw_info **info);
+void libxl_psr_hw_info_list_free(libxl_psr_hw_info *list, unsigned int nr);
#endif
/* misc */
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index 197505a..d4f5f67 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -428,6 +428,31 @@ void libxl_psr_cat_info_list_free(libxl_psr_cat_info *list, int nr)
free(list);
}
+int libxl_psr_set_val(libxl_ctx *ctx, uint32_t domid,
+ libxl_psr_type type, libxl_bitmap *target_map,
+ uint64_t val)
+{
+ return ERROR_FAIL;
+}
+
+int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
+ libxl_psr_type type, unsigned int target,
+ uint64_t *val)
+{
+ return ERROR_FAIL;
+}
+
+int libxl_psr_get_hw_info(libxl_ctx *ctx, libxl_psr_feat_type type,
+ unsigned int lvl, unsigned int *nr,
+ libxl_psr_hw_info **info)
+{
+ return ERROR_FAIL;
+}
+
+void libxl_psr_hw_info_list_free(libxl_psr_hw_info *list, unsigned int nr)
+{
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index a239324..ff75a8f 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -1033,6 +1033,7 @@ libxl_psr_cbm_type = Enumeration("psr_cbm_type", [
(2, "L3_CBM_CODE"),
(3, "L3_CBM_DATA"),
(4, "L2_CBM"),
+ (5, "MBA_THRTL"),
])
libxl_psr_cat_info = Struct("psr_cat_info", [
@@ -1041,3 +1042,24 @@ libxl_psr_cat_info = Struct("psr_cat_info", [
("cbm_len", uint32),
("cdp_enabled", bool),
])
+
+libxl_psr_feat_type = Enumeration("psr_feat_type", [
+ (1, "CAT"),
+ (2, "MBA"),
+ ])
+
+libxl_psr_hw_info = Struct("psr_hw_info", [
+ ("id", uint32),
+ ("u", KeyedUnion(None, libxl_psr_feat_type, "type",
+ [("cat", Struct(None, [
+ ("cos_max", uint32),
+ ("cbm_len", uint32),
+ ("cdp_enabled", bool),
+ ])),
+ ("mba", Struct(None, [
+ ("cos_max", uint32),
+ ("thrtl_max", uint32),
+ ("linear", bool),
+ ])),
+ ]))
+ ], dir=DIR_OUT)
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 10/16] tools: implement the new libxc get hw info interface
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (8 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 09/16] tools: create general interfaces to support psr allocation features Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 11/16] tools: implement the new libxl " Yi Sun
` (6 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch implements a new libxc get hw info interface and corresponding
data structures. It also changes libxl_psr.c to call this new interface.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v6:
- remove unnecessary spaces in brackets.
(suggested by Wei Liu)
- use assert to check input lvl.
(suggested by Roger Pau Monné)
v5:
- directly define 'xc_psr_hw_info' as union type.
(suggested by Roger Pau Monné)
- converge L2 and L3 cases in 'xc_psr_get_hw_info'.
(suggested by Roger Pau Monné)
v4:
- remove 'ALLOC_' from macro names.
(suggested by Roger Pau Monné)
- remove 'XC_PSR_FEAT_UNKNOWN' which is not necessary.
(suggested by Roger Pau Monné)
- remove 'FEAT_' from enum item names.
(suggested by Roger Pau Monné)
- remove 'xc_' from struct name.
(suggested by Roger Pau Monné)
- adjust codes to reduce indentation.
(suggested by Roger Pau Monné)
- assert for not happened case.
(suggested by Roger Pau Monné)
- add LOGE to show errno.
(suggested by Roger Pau Monné)
v3:
- rename 'psr_cat/PSR_CAT' to 'psr_alloc/PSR_ALLOC' and remove 'op/OP'
from name.
(suggested by Roger Pau Monné)
- remove 'info' from 'xc_cat_info' and 'xc_mba_info'.
(suggested by Roger Pau Monné)
- set errno in 'xc_psr_get_hw_info'.
(suggested by Roger Pau Monné)
- remove 'inline'.
(suggested by Roger Pau Monné)
- remove 'psr' from 'libxl__psr_feat_type_to_libxc_psr_feat_type' to make
function name shorter.
(suggested by Roger Pau Monné)
- check 'xc_type' in 'libxl_psr_cat_get_info'.
(suggested by Roger Pau Monné)
v2:
- split this patch out from a big patch in v1.
(suggested by Wei Liu)
- change 'CAT_INFO' and 'MBA_INFO' to 'CAT' and 'MBA'.
(suggested by Chao Peng)
---
tools/libxc/include/xenctrl.h | 27 ++++++++++++++++++---
tools/libxc/xc_psr.c | 55 +++++++++++++++++++++++++++----------------
tools/libxl/libxl_psr.c | 38 ++++++++++++++++++++++++++++--
3 files changed, 95 insertions(+), 25 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 666db0b..9fc3348 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2494,6 +2494,28 @@ enum xc_psr_cat_type {
};
typedef enum xc_psr_cat_type xc_psr_cat_type;
+enum xc_psr_feat_type {
+ XC_PSR_CAT_L3,
+ XC_PSR_CAT_L2,
+ XC_PSR_MBA,
+};
+typedef enum xc_psr_feat_type xc_psr_feat_type;
+
+union xc_psr_hw_info {
+ struct {
+ uint32_t cos_max;
+ uint32_t cbm_len;
+ bool cdp_enabled;
+ } cat;
+
+ struct {
+ uint32_t cos_max;
+ uint32_t thrtl_max;
+ bool linear;
+ } mba;
+};
+typedef union xc_psr_hw_info xc_psr_hw_info;
+
int xc_psr_cmt_attach(xc_interface *xch, uint32_t domid);
int xc_psr_cmt_detach(xc_interface *xch, uint32_t domid);
int xc_psr_cmt_get_domain_rmid(xc_interface *xch, uint32_t domid,
@@ -2515,9 +2537,8 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
xc_psr_cat_type type, uint32_t target,
uint64_t *data);
-int xc_psr_cat_get_info(xc_interface *xch, uint32_t socket, unsigned int lvl,
- uint32_t *cos_max, uint32_t *cbm_len,
- bool *cdp_enabled);
+int xc_psr_get_hw_info(xc_interface *xch, uint32_t socket,
+ xc_psr_feat_type type, xc_psr_hw_info *hw_info);
int xc_get_cpu_levelling_caps(xc_interface *xch, uint32_t *caps);
int xc_get_cpu_featureset(xc_interface *xch, uint32_t index,
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index 78deba0..2335842 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -323,37 +323,52 @@ int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
return rc;
}
-int xc_psr_cat_get_info(xc_interface *xch, uint32_t socket, unsigned int lvl,
- uint32_t *cos_max, uint32_t *cbm_len, bool *cdp_enabled)
+int xc_psr_get_hw_info(xc_interface *xch, uint32_t socket,
+ xc_psr_feat_type type, xc_psr_hw_info *hw_info)
{
int rc = -1;
DECLARE_SYSCTL;
+ if ( !hw_info )
+ {
+ errno = EINVAL;
+ return rc;
+ }
+
sysctl.cmd = XEN_SYSCTL_psr_alloc;
sysctl.u.psr_alloc.target = socket;
- switch ( lvl )
+ switch ( type )
{
- case 2:
- sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l2_info;
+ case XC_PSR_CAT_L2:
+ case XC_PSR_CAT_L3:
+ sysctl.u.psr_alloc.cmd = (type == XC_PSR_CAT_L2) ?
+ XEN_SYSCTL_PSR_get_l2_info :
+ XEN_SYSCTL_PSR_get_l3_info;
+
rc = xc_sysctl(xch, &sysctl);
- if ( !rc )
- {
- *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
- *cdp_enabled = false;
- }
+ if ( rc )
+ break;
+
+ hw_info->cat.cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
+ hw_info->cat.cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
+ hw_info->cat.cdp_enabled = (type == XC_PSR_CAT_L2) ?
+ false :
+ (sysctl.u.psr_alloc.u.cat_info.flags &
+ XEN_SYSCTL_PSR_CAT_L3_CDP);
+
break;
- case 3:
- sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_l3_info;
+ case XC_PSR_MBA:
+ sysctl.u.psr_alloc.cmd = XEN_SYSCTL_PSR_get_mba_info;
rc = xc_sysctl(xch, &sysctl);
- if ( !rc )
- {
- *cos_max = sysctl.u.psr_alloc.u.cat_info.cos_max;
- *cbm_len = sysctl.u.psr_alloc.u.cat_info.cbm_len;
- *cdp_enabled = sysctl.u.psr_alloc.u.cat_info.flags &
- XEN_SYSCTL_PSR_CAT_L3_CDP;
- }
+ if ( rc )
+ break;
+
+ hw_info->mba.cos_max = sysctl.u.psr_alloc.u.mba_info.cos_max;
+ hw_info->mba.thrtl_max = sysctl.u.psr_alloc.u.mba_info.thrtl_max;
+ hw_info->mba.linear = sysctl.u.psr_alloc.u.mba_info.flags &
+ XEN_SYSCTL_PSR_MBA_LINEAR;
+
break;
default:
errno = EOPNOTSUPP;
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index d4f5f67..e1cc250 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -361,6 +361,31 @@ int libxl_psr_cat_get_cbm(libxl_ctx *ctx, uint32_t domid,
return rc;
}
+static xc_psr_feat_type libxl__feat_type_to_libxc_feat_type(
+ libxl_psr_feat_type type, unsigned int lvl)
+{
+ xc_psr_feat_type xc_type;
+
+ switch (type) {
+ case LIBXL_PSR_FEAT_TYPE_CAT:
+ assert(lvl == 3 || lvl == 2);
+
+ if (lvl == 3)
+ xc_type = XC_PSR_CAT_L3;
+ if (lvl == 2)
+ xc_type = XC_PSR_CAT_L2;
+ break;
+ case LIBXL_PSR_FEAT_TYPE_MBA:
+ xc_type = XC_PSR_MBA;
+ break;
+ default:
+ /* Could not happen */
+ assert(0);
+ }
+
+ return xc_type;
+}
+
int libxl_psr_cat_get_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
unsigned int *nr, unsigned int lvl)
{
@@ -369,6 +394,8 @@ int libxl_psr_cat_get_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
int i = 0, socketid, nr_sockets;
libxl_bitmap socketmap;
libxl_psr_cat_info *ptr;
+ xc_psr_hw_info hw_info;
+ xc_psr_feat_type xc_type;
libxl_bitmap_init(&socketmap);
@@ -385,16 +412,23 @@ int libxl_psr_cat_get_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
goto out;
}
+ xc_type = libxl__feat_type_to_libxc_feat_type(LIBXL_PSR_FEAT_TYPE_CAT, lvl);
+
ptr = libxl__malloc(NOGC, nr_sockets * sizeof(libxl_psr_cat_info));
libxl_for_each_set_bit(socketid, socketmap) {
ptr[i].id = socketid;
- if (xc_psr_cat_get_info(ctx->xch, socketid, lvl, &ptr[i].cos_max,
- &ptr[i].cbm_len, &ptr[i].cdp_enabled)) {
+ if (xc_psr_get_hw_info(ctx->xch, socketid, xc_type, &hw_info)) {
+ LOGE(ERROR, "failed to get hw info");
rc = ERROR_FAIL;
free(ptr);
goto out;
}
+
+ ptr[i].cos_max = hw_info.cat.cos_max;
+ ptr[i].cbm_len = hw_info.cat.cbm_len;
+ ptr[i].cdp_enabled = hw_info.cat.cdp_enabled;
+
i++;
}
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 11/16] tools: implement the new libxl get hw info interface
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (9 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 10/16] tools: implement the new libxc get hw info interface Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 12/16] tools: implement the new xl " Yi Sun
` (5 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch implements the new libxl get hw info interface,
'libxl_psr_get_hw_info', which is suitable to all psr allocation
features. It also implements corresponding list free function,
'libxl_psr_hw_info_list_free' and makes 'libxl_psr_cat_get_info' call
'libxl_psr_get_hw_info' to avoid redundant code in libxl_psr.c.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- change 'if (rc < 0)' to 'if (rc)'.
(suggested by Roger Pau Monné)
v4:
- remove 'xc_' from struct name.
(suggested by Roger Pau Monné)
- fix words in commit message.
(suggested by Roger Pau Monné)
- change type of 'libxl__hw_info_to_libxl_cat_info' to void and use
assert to check invalid type. Then, remove check for
'libxl__hw_info_to_libxl_cat_info'.
(suggested by Roger Pau Monné)
- change type of 'libxl__xc_hw_info_to_libxl_hw_info' to void and use
assert to check invalid type. Then, remove check for
'libxl__xc_hw_info_to_libxl_hw_info'.
(suggested by Roger Pau Monné)
v3:
- remove casting.
(suggested by Roger Pau Monné)
- remove inline.
(suggested by Roger Pau Monné)
- change 'libxc__psr_hw_info_to_libxl_psr_hw_info' to
'libxl__xc_hw_info_to_libxl_hw_info'.
(suggested by Roger Pau Monné)
- remove '_hw' from parameter names.
(suggested by Roger Pau Monné)
- change some 'LOGE' to 'LOG'.
(suggested by Roger Pau Monné)
- check returned 'xc_type' and remove redundant 'lvl' check.
(suggested by Roger Pau Monné)
v2:
- split this patch out from a big patch in v1.
(suggested by Wei Liu)
- change 'CAT_INFO'/'MBA_INFO' to 'CAT' and 'MBA. Also the libxl structure
name 'cat_info'/'mba_info' is changed to 'cat'/'mba'.
(suggested by Chao Peng)
- call 'libxl_psr_hw_info_list_free' in 'libxl_psr_cat_get_info' to free
allocated resources.
(suggested by Chao Peng)
---
tools/libxl/libxl_psr.c | 131 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 93 insertions(+), 38 deletions(-)
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index e1cc250..b053abd 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -386,56 +386,41 @@ static xc_psr_feat_type libxl__feat_type_to_libxc_feat_type(
return xc_type;
}
+static void libxl__hw_info_to_libxl_cat_info(
+ libxl_psr_feat_type type, libxl_psr_hw_info *hw_info,
+ libxl_psr_cat_info *cat_info)
+{
+ assert(type == LIBXL_PSR_FEAT_TYPE_CAT);
+
+ cat_info->id = hw_info->id;
+ cat_info->cos_max = hw_info->u.cat.cos_max;
+ cat_info->cbm_len = hw_info->u.cat.cbm_len;
+ cat_info->cdp_enabled = hw_info->u.cat.cdp_enabled;
+}
+
int libxl_psr_cat_get_info(libxl_ctx *ctx, libxl_psr_cat_info **info,
unsigned int *nr, unsigned int lvl)
{
GC_INIT(ctx);
int rc;
- int i = 0, socketid, nr_sockets;
- libxl_bitmap socketmap;
+ unsigned int i;
+ libxl_psr_hw_info *hw_info;
libxl_psr_cat_info *ptr;
- xc_psr_hw_info hw_info;
- xc_psr_feat_type xc_type;
-
- libxl_bitmap_init(&socketmap);
-
- rc = libxl__count_physical_sockets(gc, &nr_sockets);
- if (rc) {
- LOGE(ERROR, "failed to get system socket count");
- goto out;
- }
- libxl_socket_bitmap_alloc(ctx, &socketmap, nr_sockets);
- rc = libxl_get_online_socketmap(ctx, &socketmap);
- if (rc < 0) {
- LOGE(ERROR, "failed to get available sockets");
+ rc = libxl_psr_get_hw_info(ctx, LIBXL_PSR_FEAT_TYPE_CAT, lvl, nr, &hw_info);
+ if (rc)
goto out;
- }
-
- xc_type = libxl__feat_type_to_libxc_feat_type(LIBXL_PSR_FEAT_TYPE_CAT, lvl);
-
- ptr = libxl__malloc(NOGC, nr_sockets * sizeof(libxl_psr_cat_info));
-
- libxl_for_each_set_bit(socketid, socketmap) {
- ptr[i].id = socketid;
- if (xc_psr_get_hw_info(ctx->xch, socketid, xc_type, &hw_info)) {
- LOGE(ERROR, "failed to get hw info");
- rc = ERROR_FAIL;
- free(ptr);
- goto out;
- }
- ptr[i].cos_max = hw_info.cat.cos_max;
- ptr[i].cbm_len = hw_info.cat.cbm_len;
- ptr[i].cdp_enabled = hw_info.cat.cdp_enabled;
+ ptr = libxl__malloc(NOGC, *nr * sizeof(libxl_psr_cat_info));
- i++;
- }
+ for (i = 0; i < *nr; i++)
+ libxl__hw_info_to_libxl_cat_info(LIBXL_PSR_FEAT_TYPE_CAT,
+ &hw_info[i],
+ &ptr[i]);
*info = ptr;
- *nr = i;
+ libxl_psr_hw_info_list_free(hw_info, *nr);
out:
- libxl_bitmap_dispose(&socketmap);
GC_FREE;
return rc;
}
@@ -476,15 +461,85 @@ int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
return ERROR_FAIL;
}
+static void libxl__xc_hw_info_to_libxl_hw_info(
+ libxl_psr_feat_type type, xc_psr_hw_info *xc_info,
+ libxl_psr_hw_info *xl_info)
+{
+ switch (type) {
+ case LIBXL_PSR_FEAT_TYPE_CAT:
+ xl_info->u.cat.cos_max = xc_info->cat.cos_max;
+ xl_info->u.cat.cbm_len = xc_info->cat.cbm_len;
+ xl_info->u.cat.cdp_enabled = xc_info->cat.cdp_enabled;
+ break;
+ case LIBXL_PSR_FEAT_TYPE_MBA:
+ xl_info->u.mba.cos_max = xc_info->mba.cos_max;
+ xl_info->u.mba.thrtl_max = xc_info->mba.thrtl_max;
+ xl_info->u.mba.linear = xc_info->mba.linear;
+ break;
+ default:
+ assert(0);
+ }
+}
+
int libxl_psr_get_hw_info(libxl_ctx *ctx, libxl_psr_feat_type type,
unsigned int lvl, unsigned int *nr,
libxl_psr_hw_info **info)
{
- return ERROR_FAIL;
+ GC_INIT(ctx);
+ int rc, nr_sockets;
+ unsigned int i = 0, socketid;
+ libxl_bitmap socketmap;
+ libxl_psr_hw_info *ptr;
+ xc_psr_feat_type xc_type;
+ xc_psr_hw_info hw_info;
+
+ libxl_bitmap_init(&socketmap);
+
+ xc_type = libxl__feat_type_to_libxc_feat_type(type, lvl);
+
+ rc = libxl__count_physical_sockets(gc, &nr_sockets);
+ if (rc) {
+ LOG(ERROR, "failed to get system socket count");
+ goto out;
+ }
+
+ libxl_socket_bitmap_alloc(ctx, &socketmap, nr_sockets);
+ rc = libxl_get_online_socketmap(ctx, &socketmap);
+ if (rc) {
+ LOGE(ERROR, "failed to get available sockets");
+ goto out;
+ }
+
+ ptr = libxl__malloc(NOGC, nr_sockets * sizeof(libxl_psr_hw_info));
+
+ libxl_for_each_set_bit(socketid, socketmap) {
+ ptr[i].id = socketid;
+ if (xc_psr_get_hw_info(ctx->xch, socketid, xc_type, &hw_info)) {
+ rc = ERROR_FAIL;
+ free(ptr);
+ goto out;
+ }
+
+ libxl__xc_hw_info_to_libxl_hw_info(type, &hw_info, &ptr[i]);
+
+ i++;
+ }
+
+ *info = ptr;
+ *nr = i;
+out:
+ libxl_bitmap_dispose(&socketmap);
+ GC_FREE;
+ return rc;
}
void libxl_psr_hw_info_list_free(libxl_psr_hw_info *list, unsigned int nr)
{
+ unsigned int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_psr_hw_info_dispose(&list[i]);
+ free(list);
}
/*
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 12/16] tools: implement the new xl get hw info interface
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (10 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 11/16] tools: implement the new libxl " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 13/16] tools: rename 'xc_psr_cat_type' to 'xc_psr_type' Yi Sun
` (4 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch implements a new xl get HW info interface. A new argument
is added for psr-hwinfo command to get and show MBA HW info.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v3:
- change the format string of printf in 'psr_mba_hwinfo'.
(suggested by Roger Pau Monné)
- add 'const' for 'opts[]' in 'main_psr_hwinfo'.
(suggested by Roger Pau Monné)
v2:
- split out this patch from a big patch in v1.
(suggested by Wei Liu)
- change 'MBA_INFO' to 'MBA'. Also, change 'mba_info' to 'mba'.
(suggested by Chao Peng)
---
tools/xl/xl_cmdtable.c | 1 +
tools/xl/xl_psr.c | 39 ++++++++++++++++++++++++++++++++++++---
2 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index 5546cf6..249eb92 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -550,6 +550,7 @@ struct cmd_spec cmd_table[] = {
"[options]",
"-m, --cmt Show Cache Monitoring Technology (CMT) hardware info\n"
"-a, --cat Show Cache Allocation Technology (CAT) hardware info\n"
+ "-b, --mba Show Memory Bandwidth Allocation (MBA) hardware info\n"
},
{ "psr-cmt-attach",
&main_psr_cmt_attach, 0, 1,
diff --git a/tools/xl/xl_psr.c b/tools/xl/xl_psr.c
index ef00048..ab47d96 100644
--- a/tools/xl/xl_psr.c
+++ b/tools/xl/xl_psr.c
@@ -475,6 +475,31 @@ static int psr_l2_cat_hwinfo(void)
return rc;
}
+static int psr_mba_hwinfo(void)
+{
+ int rc;
+ unsigned int i, nr;
+ libxl_psr_hw_info *info;
+
+ rc = libxl_psr_get_hw_info(ctx, LIBXL_PSR_FEAT_TYPE_MBA, 0, &nr, &info);
+ if (rc)
+ return rc;
+
+ printf("Memory Bandwidth Allocation (MBA):\n");
+
+ for (i = 0; i < nr; i++) {
+ printf("Socket ID : %u\n", info[i].id);
+ printf("Linear Mode : %s\n",
+ info[i].u.mba.linear ? "Enabled" : "Disabled");
+ printf("Maximum COS : %u\n", info[i].u.mba.cos_max);
+ printf("Maximum Throttling Value: %u\n", info[i].u.mba.thrtl_max);
+ printf("Default Throttling Value: %u\n", 0);
+ }
+
+ libxl_psr_hw_info_list_free(info, nr);
+ return rc;
+}
+
int main_psr_cat_cbm_set(int argc, char **argv)
{
uint32_t domid;
@@ -593,20 +618,24 @@ int main_psr_cat_show(int argc, char **argv)
int main_psr_hwinfo(int argc, char **argv)
{
int opt, ret = 0;
- bool all = true, cmt = false, cat = false;
- static struct option opts[] = {
+ bool all = true, cmt = false, cat = false, mba = false;
+ static const struct option opts[] = {
{"cmt", 0, 0, 'm'},
{"cat", 0, 0, 'a'},
+ {"mba", 0, 0, 'b'},
COMMON_LONG_OPTS
};
- SWITCH_FOREACH_OPT(opt, "ma", opts, "psr-hwinfo", 0) {
+ SWITCH_FOREACH_OPT(opt, "mab", opts, "psr-hwinfo", 0) {
case 'm':
all = false; cmt = true;
break;
case 'a':
all = false; cat = true;
break;
+ case 'b':
+ all = false; mba = true;
+ break;
}
if (!ret && (all || cmt))
@@ -619,6 +648,10 @@ int main_psr_hwinfo(int argc, char **argv)
if (all || cat)
ret = psr_l2_cat_hwinfo();
+ /* MBA is independent of CMT and CAT */
+ if (all || mba)
+ ret = psr_mba_hwinfo();
+
return ret;
}
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 13/16] tools: rename 'xc_psr_cat_type' to 'xc_psr_type'
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (11 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 12/16] tools: implement the new xl " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 14/16] tools: implement new generic get value interface and MBA get value command Yi Sun
` (3 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson, Chao Peng, Yi Sun, Wei Liu, Roger Pau Monné
This patch renames 'xc_psr_cat_type' to 'xc_psr_type' so that
the structure name is common for all allocation features.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- remove a duplicated ';'.
(suggested by Roger Pau Monné)
v4:
- move assignment of xc_type to its declaration place.
(suggested by Roger Pau Monné)
v3:
- change 'xc_psr_val_type' to 'xc_psr_type'.
(suggested by Roger Pau Monné)
---
tools/libxc/include/xenctrl.h | 8 ++++----
tools/libxc/xc_psr.c | 4 ++--
tools/libxl/libxl_psr.c | 11 +++++------
3 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 9fc3348..8451f6d 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2486,13 +2486,13 @@ enum xc_psr_cmt_type {
};
typedef enum xc_psr_cmt_type xc_psr_cmt_type;
-enum xc_psr_cat_type {
+enum xc_psr_type {
XC_PSR_CAT_L3_CBM = 1,
XC_PSR_CAT_L3_CBM_CODE = 2,
XC_PSR_CAT_L3_CBM_DATA = 3,
XC_PSR_CAT_L2_CBM = 4,
};
-typedef enum xc_psr_cat_type xc_psr_cat_type;
+typedef enum xc_psr_type xc_psr_type;
enum xc_psr_feat_type {
XC_PSR_CAT_L3,
@@ -2532,10 +2532,10 @@ int xc_psr_cmt_get_data(xc_interface *xch, uint32_t rmid, uint32_t cpu,
int xc_psr_cmt_enabled(xc_interface *xch);
int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_cat_type type, uint32_t target,
+ xc_psr_type type, uint32_t target,
uint64_t data);
int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_cat_type type, uint32_t target,
+ xc_psr_type type, uint32_t target,
uint64_t *data);
int xc_psr_get_hw_info(xc_interface *xch, uint32_t socket,
xc_psr_feat_type type, xc_psr_hw_info *hw_info);
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index 2335842..aa07fe0 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -249,7 +249,7 @@ int xc_psr_cmt_enabled(xc_interface *xch)
return 0;
}
int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_cat_type type, uint32_t target,
+ xc_psr_type type, uint32_t target,
uint64_t data)
{
DECLARE_DOMCTL;
@@ -284,7 +284,7 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
}
int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_cat_type type, uint32_t target,
+ xc_psr_type type, uint32_t target,
uint64_t *data)
{
int rc;
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index b053abd..c54cb6f 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -303,11 +303,11 @@ out:
return rc;
}
-static inline xc_psr_cat_type libxl__psr_cbm_type_to_libxc_psr_cat_type(
+static inline xc_psr_type libxl__psr_cbm_type_to_libxc_psr_type(
libxl_psr_cbm_type type)
{
- BUILD_BUG_ON(sizeof(libxl_psr_cbm_type) != sizeof(xc_psr_cat_type));
- return (xc_psr_cat_type)type;
+ BUILD_BUG_ON(sizeof(libxl_psr_cbm_type) != sizeof(xc_psr_type));
+ return (xc_psr_type)type;
}
int libxl_psr_cat_set_cbm(libxl_ctx *ctx, uint32_t domid,
@@ -325,12 +325,11 @@ int libxl_psr_cat_set_cbm(libxl_ctx *ctx, uint32_t domid,
}
libxl_for_each_set_bit(socketid, *target_map) {
- xc_psr_cat_type xc_type;
+ xc_psr_type xc_type = libxl__psr_cbm_type_to_libxc_psr_type(type);
if (socketid >= nr_sockets)
break;
- xc_type = libxl__psr_cbm_type_to_libxc_psr_cat_type(type);
if (xc_psr_cat_set_domain_data(ctx->xch, domid, xc_type,
socketid, cbm)) {
libxl__psr_cat_log_err_msg(gc, errno);
@@ -349,7 +348,7 @@ int libxl_psr_cat_get_cbm(libxl_ctx *ctx, uint32_t domid,
{
GC_INIT(ctx);
int rc = 0;
- xc_psr_cat_type xc_type = libxl__psr_cbm_type_to_libxc_psr_cat_type(type);
+ xc_psr_type xc_type = libxl__psr_cbm_type_to_libxc_psr_type(type);
if (xc_psr_cat_get_domain_data(ctx->xch, domid, xc_type,
target, cbm_r)) {
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 14/16] tools: implement new generic get value interface and MBA get value command
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (12 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 13/16] tools: rename 'xc_psr_cat_type' to 'xc_psr_type' Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-10-20 8:28 ` [PATCH v9 15/16] tools: implement new generic set value interface and MBA set " Yi Sun
` (2 subsequent siblings)
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson, Chao Peng, Yi Sun, Wei Liu, Roger Pau Monné
This patch implements generic get value interfaces in libxc and libxl.
It also refactors the get value flow in xl to make it be suitable for all
allocation features. Based on that, a new MBA get value command is added in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v6:
- fix one coding style issue.
(suggested by Roger Pau Monné)
v5:
- start a newline for "CDP" because it exceeds 80 characters.
(suggested by Roger Pau Monné)
- remove a duplicated ';'.
(suggested by Roger Pau Monné)
- remove a extra newline.
(suggested by Roger Pau Monné)
- correct words in log message.
(suggested by Roger Pau Monné)
v4:
- use designated initializers for 'feat_name[]'.
(suggested by Roger Pau Monné)
- use LOG in 'libxl__psr_alloc_log_err_msg'.
(suggested by Roger Pau Monné)
v3:
- replace 'libxl_psr_cbm_type' to 'libxl_psr_type' in newly defined
interfaces.
(suggested by Roger Pau Monné)
v2:
- change 'CAT_INFO'/'MBA_INFO' to 'CAT'/'MBA'. The related structure names
are changed too.
(suggested by Chao Peng)
---
tools/libxc/include/xenctrl.h | 7 +-
tools/libxc/xc_psr.c | 9 +-
tools/libxl/libxl_psr.c | 58 ++++++++-----
tools/xl/xl.h | 1 +
tools/xl/xl_cmdtable.c | 5 ++
tools/xl/xl_psr.c | 185 ++++++++++++++++++++++++++++++------------
6 files changed, 183 insertions(+), 82 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 8451f6d..fc0d4d2 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2491,6 +2491,7 @@ enum xc_psr_type {
XC_PSR_CAT_L3_CBM_CODE = 2,
XC_PSR_CAT_L3_CBM_DATA = 3,
XC_PSR_CAT_L2_CBM = 4,
+ XC_PSR_MBA_THRTL = 5,
};
typedef enum xc_psr_type xc_psr_type;
@@ -2534,9 +2535,9 @@ int xc_psr_cmt_enabled(xc_interface *xch);
int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
xc_psr_type type, uint32_t target,
uint64_t data);
-int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t *data);
+int xc_psr_get_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t *data);
int xc_psr_get_hw_info(xc_interface *xch, uint32_t socket,
xc_psr_feat_type type, xc_psr_hw_info *hw_info);
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index aa07fe0..37a6feb 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -283,9 +283,9 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
return do_domctl(xch, &domctl);
}
-int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t *data)
+int xc_psr_get_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t *data)
{
int rc;
DECLARE_DOMCTL;
@@ -305,6 +305,9 @@ int xc_psr_cat_get_domain_data(xc_interface *xch, uint32_t domid,
case XC_PSR_CAT_L2_CBM:
cmd = XEN_DOMCTL_PSR_GET_L2_CBM;
break;
+ case XC_PSR_MBA_THRTL:
+ cmd = XEN_DOMCTL_PSR_GET_MBA_THRTL;
+ break;
default:
errno = EINVAL;
return -1;
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index c54cb6f..7c560bc 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -71,16 +71,30 @@ static void libxl__psr_cmt_log_err_msg(libxl__gc *gc, int err)
LOGE(ERROR, "%s", msg);
}
-static void libxl__psr_cat_log_err_msg(libxl__gc *gc, int err)
+static void libxl__psr_alloc_log_err_msg(libxl__gc *gc,
+ int err,
+ libxl_psr_type type)
{
+ /*
+ * Index is 'libxl_psr_type' so we set two 'CDP' to correspond to
+ * DATA and CODE.
+ */
+ const char * const feat_name[] = {
+ [LIBXL_PSR_CBM_TYPE_UNKNOWN] = "UNKNOWN",
+ [LIBXL_PSR_CBM_TYPE_L3_CBM] = "L3 CAT",
+ [LIBXL_PSR_CBM_TYPE_L3_CBM_CODE...LIBXL_PSR_CBM_TYPE_L3_CBM_DATA] =
+ "CDP",
+ [LIBXL_PSR_CBM_TYPE_L2_CBM] = "L2 CAT",
+ [LIBXL_PSR_CBM_TYPE_MBA_THRTL] = "MBA",
+ };
char *msg;
switch (err) {
case ENODEV:
- msg = "CAT is not supported in this system";
+ msg = "is not supported in this system";
break;
case ENOENT:
- msg = "CAT is not enabled on the socket";
+ msg = "is not enabled on the socket";
break;
case EOVERFLOW:
msg = "no free COS available";
@@ -106,7 +120,7 @@ static void libxl__psr_cat_log_err_msg(libxl__gc *gc, int err)
return;
}
- LOGE(ERROR, "%s", msg);
+ LOG(ERROR, "%s: %s", feat_name[type], msg);
}
static int libxl__pick_socket_cpu(libxl__gc *gc, uint32_t socketid)
@@ -303,10 +317,10 @@ out:
return rc;
}
-static inline xc_psr_type libxl__psr_cbm_type_to_libxc_psr_type(
- libxl_psr_cbm_type type)
+static inline xc_psr_type libxl__psr_type_to_libxc_psr_type(
+ libxl_psr_type type)
{
- BUILD_BUG_ON(sizeof(libxl_psr_cbm_type) != sizeof(xc_psr_type));
+ BUILD_BUG_ON(sizeof(libxl_psr_type) != sizeof(xc_psr_type));
return (xc_psr_type)type;
}
@@ -325,14 +339,14 @@ int libxl_psr_cat_set_cbm(libxl_ctx *ctx, uint32_t domid,
}
libxl_for_each_set_bit(socketid, *target_map) {
- xc_psr_type xc_type = libxl__psr_cbm_type_to_libxc_psr_type(type);
+ xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
if (socketid >= nr_sockets)
break;
if (xc_psr_cat_set_domain_data(ctx->xch, domid, xc_type,
socketid, cbm)) {
- libxl__psr_cat_log_err_msg(gc, errno);
+ libxl__psr_alloc_log_err_msg(gc, errno, type);
rc = ERROR_FAIL;
}
}
@@ -346,18 +360,7 @@ int libxl_psr_cat_get_cbm(libxl_ctx *ctx, uint32_t domid,
libxl_psr_cbm_type type, uint32_t target,
uint64_t *cbm_r)
{
- GC_INIT(ctx);
- int rc = 0;
- xc_psr_type xc_type = libxl__psr_cbm_type_to_libxc_psr_type(type);
-
- if (xc_psr_cat_get_domain_data(ctx->xch, domid, xc_type,
- target, cbm_r)) {
- libxl__psr_cat_log_err_msg(gc, errno);
- rc = ERROR_FAIL;
- }
-
- GC_FREE;
- return rc;
+ return libxl_psr_get_val(ctx, domid, type, target, cbm_r);
}
static xc_psr_feat_type libxl__feat_type_to_libxc_feat_type(
@@ -457,7 +460,18 @@ int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
libxl_psr_type type, unsigned int target,
uint64_t *val)
{
- return ERROR_FAIL;
+ GC_INIT(ctx);
+ int rc = 0;
+ xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
+
+ if (xc_psr_get_domain_data(ctx->xch, domid, xc_type,
+ target, val)) {
+ libxl__psr_alloc_log_err_msg(gc, errno, type);
+ rc = ERROR_FAIL;
+ }
+
+ GC_FREE;
+ return rc;
}
static void libxl__xc_hw_info_to_libxl_hw_info(
diff --git a/tools/xl/xl.h b/tools/xl/xl.h
index 6b60d1d..a72458b 100644
--- a/tools/xl/xl.h
+++ b/tools/xl/xl.h
@@ -208,6 +208,7 @@ int main_psr_cmt_detach(int argc, char **argv);
int main_psr_cmt_show(int argc, char **argv);
int main_psr_cat_cbm_set(int argc, char **argv);
int main_psr_cat_show(int argc, char **argv);
+int main_psr_mba_show(int argc, char **argv);
#endif
int main_qemu_monitor_command(int argc, char **argv);
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index 249eb92..fb9e918 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -586,6 +586,11 @@ struct cmd_spec cmd_table[] = {
"[options] <Domain>",
"-l <level> Specify the cache level to process, otherwise L3 cache is processed\n"
},
+ { "psr-mba-show",
+ &main_psr_mba_show, 0, 1,
+ "Show Memory Bandwidth Allocation information",
+ "<Domain>",
+ },
#endif
{ "usbctrl-attach",
&main_usbctrl_attach, 0, 1,
diff --git a/tools/xl/xl_psr.c b/tools/xl/xl_psr.c
index ab47d96..0eedbc7 100644
--- a/tools/xl/xl_psr.c
+++ b/tools/xl/xl_psr.c
@@ -327,19 +327,26 @@ out:
return rc;
}
-static void psr_cat_print_one_domain_cbm_type(uint32_t domid, uint32_t socketid,
- libxl_psr_cbm_type type)
+static void psr_print_one_domain_val_type(uint32_t domid,
+ libxl_psr_hw_info *info,
+ libxl_psr_type type)
{
- uint64_t cbm;
+ uint64_t val;
- if (!libxl_psr_cat_get_cbm(ctx, domid, type, socketid, &cbm))
- printf("%#16"PRIx64, cbm);
+ if (!libxl_psr_get_val(ctx, domid, type, info->id, &val)) {
+ if (type == LIBXL_PSR_CBM_TYPE_MBA_THRTL && info->u.mba.linear)
+ printf("%16"PRIu64, val);
+ else
+ printf("%#16"PRIx64, val);
+ }
else
printf("%16s", "error");
}
-static void psr_cat_print_one_domain_cbm(uint32_t domid, uint32_t socketid,
- bool cdp_enabled, unsigned int lvl)
+static void psr_print_one_domain_val(uint32_t domid,
+ libxl_psr_hw_info *info,
+ libxl_psr_feat_type type,
+ unsigned int lvl)
{
char *domain_name;
@@ -347,106 +354,155 @@ static void psr_cat_print_one_domain_cbm(uint32_t domid, uint32_t socketid,
printf("%5d%25s", domid, domain_name);
free(domain_name);
- switch (lvl) {
- case 3:
- if (!cdp_enabled) {
- psr_cat_print_one_domain_cbm_type(domid, socketid,
+ switch (type) {
+ case LIBXL_PSR_FEAT_TYPE_CAT:
+ switch (lvl) {
+ case 3:
+ if (!info->u.cat.cdp_enabled) {
+ psr_print_one_domain_val_type(domid, info,
LIBXL_PSR_CBM_TYPE_L3_CBM);
- } else {
- psr_cat_print_one_domain_cbm_type(domid, socketid,
+ } else {
+ psr_print_one_domain_val_type(domid, info,
LIBXL_PSR_CBM_TYPE_L3_CBM_CODE);
- psr_cat_print_one_domain_cbm_type(domid, socketid,
+ psr_print_one_domain_val_type(domid, info,
LIBXL_PSR_CBM_TYPE_L3_CBM_DATA);
- }
- break;
- case 2:
- psr_cat_print_one_domain_cbm_type(domid, socketid,
+ }
+ break;
+
+ case 2:
+ psr_print_one_domain_val_type(domid, info,
LIBXL_PSR_CBM_TYPE_L2_CBM);
+ break;
+
+ default:
+ printf("Input lvl %d is wrong!", lvl);
+ }
break;
- default:
- printf("Input lvl %d is wrong!", lvl);
+
+ case LIBXL_PSR_FEAT_TYPE_MBA:
+ psr_print_one_domain_val_type(domid, info,
+ LIBXL_PSR_CBM_TYPE_MBA_THRTL);
break;
}
printf("\n");
}
-static int psr_cat_print_domain_cbm(uint32_t domid, uint32_t socketid,
- bool cdp_enabled, unsigned int lvl)
+static int psr_print_domain_val(uint32_t domid,
+ libxl_psr_hw_info *info,
+ libxl_psr_feat_type type,
+ unsigned int lvl)
{
int i, nr_domains;
libxl_dominfo *list;
if (domid != INVALID_DOMID) {
- psr_cat_print_one_domain_cbm(domid, socketid, cdp_enabled, lvl);
+ psr_print_one_domain_val(domid, info, type, lvl);
return 0;
}
if (!(list = libxl_list_domain(ctx, &nr_domains))) {
- fprintf(stderr, "Failed to get domain list for cbm display\n");
- return -1;
+ fprintf(stderr, "Failed to get domain list for value display\n");
+ return EXIT_FAILURE;
}
for (i = 0; i < nr_domains; i++)
- psr_cat_print_one_domain_cbm(list[i].domid, socketid, cdp_enabled, lvl);
+ psr_print_one_domain_val(list[i].domid, info, type, lvl);
libxl_dominfo_list_free(list, nr_domains);
return 0;
}
-static int psr_cat_print_socket(uint32_t domid, libxl_psr_cat_info *info,
- unsigned int lvl)
+static int psr_print_socket(uint32_t domid,
+ libxl_psr_hw_info *info,
+ libxl_psr_feat_type type,
+ unsigned int lvl)
{
- int rc;
- uint32_t l3_cache_size;
-
printf("%-16s: %u\n", "Socket ID", info->id);
- /* So far, CMT only supports L3 cache. */
- if (lvl == 3) {
- rc = libxl_psr_cmt_get_l3_cache_size(ctx, info->id, &l3_cache_size);
- if (rc) {
- fprintf(stderr, "Failed to get l3 cache size for socket:%d\n",
- info->id);
- return -1;
+ switch (type) {
+ case LIBXL_PSR_FEAT_TYPE_CAT:
+ {
+ int rc;
+ uint32_t l3_cache_size;
+
+ /* So far, CMT only supports L3 cache. */
+ if (lvl == 3) {
+ rc = libxl_psr_cmt_get_l3_cache_size(ctx, info->id, &l3_cache_size);
+ if (rc) {
+ fprintf(stderr, "Failed to get l3 cache size for socket:%d\n",
+ info->id);
+ return -1;
+ }
+ printf("%-16s: %uKB\n", "L3 Cache", l3_cache_size);
}
- printf("%-16s: %uKB\n", "L3 Cache", l3_cache_size);
+
+ printf("%-16s: %#llx\n", "Default CBM",
+ (1ull << info->u.cat.cbm_len) - 1);
+ if (info->u.cat.cdp_enabled)
+ printf("%5s%25s%16s%16s\n", "ID", "NAME", "CBM (code)", "CBM (data)");
+ else
+ printf("%5s%25s%16s\n", "ID", "NAME", "CBM");
+
+ break;
}
- printf("%-16s: %#llx\n", "Default CBM", (1ull << info->cbm_len) - 1);
- if (info->cdp_enabled)
- printf("%5s%25s%16s%16s\n", "ID", "NAME", "CBM (code)", "CBM (data)");
- else
- printf("%5s%25s%16s\n", "ID", "NAME", "CBM");
+ case LIBXL_PSR_FEAT_TYPE_MBA:
+ printf("%-16s: %u\n", "Default THRTL", 0);
+ printf("%5s%25s%16s\n", "ID", "NAME", "THRTL");
+ break;
- return psr_cat_print_domain_cbm(domid, info->id, info->cdp_enabled, lvl);
+ default:
+ fprintf(stderr, "Input feature type %d is wrong\n", type);
+ return EXIT_FAILURE;
+ }
+
+ return psr_print_domain_val(domid, info, type, lvl);
}
-static int psr_cat_show(uint32_t domid, unsigned int lvl)
+static int psr_val_show(uint32_t domid,
+ libxl_psr_feat_type type,
+ unsigned int lvl)
{
unsigned int i, nr;
int rc;
- libxl_psr_cat_info *info;
+ libxl_psr_hw_info *info;
- if (lvl != 2 && lvl != 3) {
- fprintf(stderr, "Input lvl %d is wrong\n", lvl);
+ switch (type) {
+ case LIBXL_PSR_FEAT_TYPE_CAT:
+ if (lvl != 2 && lvl != 3) {
+ fprintf(stderr, "Input lvl %d is wrong\n", lvl);
+ return EXIT_FAILURE;
+ }
+ break;
+
+ case LIBXL_PSR_FEAT_TYPE_MBA:
+ if (lvl) {
+ fprintf(stderr,
+ "Unexpected lvl parameter %d for MBA feature\n", lvl);
+ return EXIT_FAILURE;
+ }
+ break;
+
+ default:
+ fprintf(stderr, "Input feature type %d is wrong\n", type);
return EXIT_FAILURE;
}
- rc = libxl_psr_cat_get_info(ctx, &info, &nr, lvl);
+ rc = libxl_psr_get_hw_info(ctx, type, lvl, &nr, &info);
if (rc) {
- fprintf(stderr, "Failed to get %s cat info\n", (lvl == 3)?"L3":"L2");
+ fprintf(stderr, "Failed to get info\n");
return rc;
}
for (i = 0; i < nr; i++) {
- rc = psr_cat_print_socket(domid, info + i, lvl);
+ rc = psr_print_socket(domid, info + i, type, lvl);
if (rc)
goto out;
}
out:
- libxl_psr_cat_info_list_free(info, nr);
+ libxl_psr_hw_info_list_free(info, nr);
return rc;
}
@@ -475,6 +531,27 @@ static int psr_l2_cat_hwinfo(void)
return rc;
}
+int main_psr_mba_show(int argc, char **argv)
+{
+ int opt;
+ uint32_t domid;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "psr-mba-show", 0) {
+ /* No options */
+ }
+
+ if (optind >= argc)
+ domid = INVALID_DOMID;
+ else if (optind == argc - 1)
+ domid = find_domain(argv[optind]);
+ else {
+ help("psr-mba-show");
+ return 2;
+ }
+
+ return psr_val_show(domid, LIBXL_PSR_FEAT_TYPE_MBA, 0);
+}
+
static int psr_mba_hwinfo(void)
{
int rc;
@@ -612,7 +689,7 @@ int main_psr_cat_show(int argc, char **argv)
return 2;
}
- return psr_cat_show(domid, lvl);
+ return psr_val_show(domid, LIBXL_PSR_FEAT_TYPE_CAT, lvl);
}
int main_psr_hwinfo(int argc, char **argv)
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9 15/16] tools: implement new generic set value interface and MBA set value command
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (13 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 14/16] tools: implement new generic get value interface and MBA get value command Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-12-18 8:31 ` [PATCH v9.1 " Yi Sun
2017-10-20 8:28 ` [PATCH v9 16/16] docs: add MBA description in docs Yi Sun
2017-12-05 2:53 ` [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
16 siblings, 1 reply; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch implements new generic set value interfaces in libxc and libxl.
These interfaces are suitable for all allocation features. It also adds a
new MBA set value command in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- move xc_type definition and value get out of the loop.
(suggested by Roger Pau Monné)
v4:
- remove 'ALLOC_' from macro name.
(suggested by Roger Pau Monné)
- adjust place of argc check and return EXIT_FAILURE.
(suggested by Roger Pau Monné)
- fix indentation issue.
(suggested by Roger Pau Monné)
- move same type local variables declaration to a single line.
(suggested by Roger Pau Monné)
v3:
- add 'const' for 'opts[]' in 'main_psr_mba_set'.
(suggested by Roger Pau Monné)
- replace 'libxl_psr_cbm_type' to 'libxl_psr_type' for newly defined
interfaces.
(suggested by Roger Pau Monné)
---
tools/libxc/include/xenctrl.h | 6 ++---
tools/libxc/xc_psr.c | 9 ++++---
tools/libxl/libxl_psr.c | 52 ++++++++++++++++++++--------------------
tools/xl/xl.h | 1 +
tools/xl/xl_cmdtable.c | 6 +++++
tools/xl/xl_psr.c | 55 +++++++++++++++++++++++++++++++++++++++++++
6 files changed, 96 insertions(+), 33 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index fc0d4d2..90bee20 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2532,9 +2532,9 @@ int xc_psr_cmt_get_data(xc_interface *xch, uint32_t rmid, uint32_t cpu,
uint64_t *tsc);
int xc_psr_cmt_enabled(xc_interface *xch);
-int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t data);
+int xc_psr_set_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t data);
int xc_psr_get_domain_data(xc_interface *xch, uint32_t domid,
xc_psr_type type, uint32_t target,
uint64_t *data);
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index 37a6feb..1a0ab63 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -248,9 +248,9 @@ int xc_psr_cmt_enabled(xc_interface *xch)
return 0;
}
-int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t data)
+int xc_psr_set_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t data)
{
DECLARE_DOMCTL;
uint32_t cmd;
@@ -269,6 +269,9 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
case XC_PSR_CAT_L2_CBM:
cmd = XEN_DOMCTL_PSR_SET_L2_CBM;
break;
+ case XC_PSR_MBA_THRTL:
+ cmd = XEN_DOMCTL_PSR_SET_MBA_THRTL;
+ break;
default:
errno = EINVAL;
return -1;
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index 7c560bc..9ced7d1 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -328,32 +328,7 @@ int libxl_psr_cat_set_cbm(libxl_ctx *ctx, uint32_t domid,
libxl_psr_cbm_type type, libxl_bitmap *target_map,
uint64_t cbm)
{
- GC_INIT(ctx);
- int rc;
- int socketid, nr_sockets;
-
- rc = libxl__count_physical_sockets(gc, &nr_sockets);
- if (rc) {
- LOGED(ERROR, domid, "failed to get system socket count");
- goto out;
- }
-
- libxl_for_each_set_bit(socketid, *target_map) {
- xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
-
- if (socketid >= nr_sockets)
- break;
-
- if (xc_psr_cat_set_domain_data(ctx->xch, domid, xc_type,
- socketid, cbm)) {
- libxl__psr_alloc_log_err_msg(gc, errno, type);
- rc = ERROR_FAIL;
- }
- }
-
-out:
- GC_FREE;
- return rc;
+ return libxl_psr_set_val(ctx, domid, type, target_map, cbm);
}
int libxl_psr_cat_get_cbm(libxl_ctx *ctx, uint32_t domid,
@@ -453,7 +428,30 @@ int libxl_psr_set_val(libxl_ctx *ctx, uint32_t domid,
libxl_psr_type type, libxl_bitmap *target_map,
uint64_t val)
{
- return ERROR_FAIL;
+ GC_INIT(ctx);
+ int rc, socketid, nr_sockets;
+ xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
+
+ rc = libxl__count_physical_sockets(gc, &nr_sockets);
+ if (rc) {
+ LOG(ERROR, "failed to get system socket count");
+ goto out;
+ }
+
+ libxl_for_each_set_bit(socketid, *target_map) {
+ if (socketid >= nr_sockets)
+ break;
+
+ if (xc_psr_set_domain_data(ctx->xch, domid, xc_type,
+ socketid, val)) {
+ libxl__psr_alloc_log_err_msg(gc, errno, type);
+ rc = ERROR_FAIL;
+ }
+ }
+
+out:
+ GC_FREE;
+ return rc;
}
int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
diff --git a/tools/xl/xl.h b/tools/xl/xl.h
index a72458b..4e784ff 100644
--- a/tools/xl/xl.h
+++ b/tools/xl/xl.h
@@ -208,6 +208,7 @@ int main_psr_cmt_detach(int argc, char **argv);
int main_psr_cmt_show(int argc, char **argv);
int main_psr_cat_cbm_set(int argc, char **argv);
int main_psr_cat_show(int argc, char **argv);
+int main_psr_mba_set(int argc, char **argv);
int main_psr_mba_show(int argc, char **argv);
#endif
int main_qemu_monitor_command(int argc, char **argv);
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index fb9e918..6d89439 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -586,6 +586,12 @@ struct cmd_spec cmd_table[] = {
"[options] <Domain>",
"-l <level> Specify the cache level to process, otherwise L3 cache is processed\n"
},
+ { "psr-mba-set",
+ &main_psr_mba_set, 0, 1,
+ "Set throttling value (THRTL) for a domain",
+ "[options] <Domain> <THRTL>",
+ "-s <socket> Specify the socket to process, otherwise all sockets are processed\n"
+ },
{ "psr-mba-show",
&main_psr_mba_show, 0, 1,
"Show Memory Bandwidth Allocation information",
diff --git a/tools/xl/xl_psr.c b/tools/xl/xl_psr.c
index 0eedbc7..181d300 100644
--- a/tools/xl/xl_psr.c
+++ b/tools/xl/xl_psr.c
@@ -552,6 +552,61 @@ int main_psr_mba_show(int argc, char **argv)
return psr_val_show(domid, LIBXL_PSR_FEAT_TYPE_MBA, 0);
}
+int main_psr_mba_set(int argc, char **argv)
+{
+ uint32_t domid;
+ libxl_psr_type type;
+ uint64_t thrtl;
+ int ret, opt = 0;
+ libxl_bitmap target_map;
+ char *value;
+ libxl_string_list socket_list;
+ unsigned long start, end;
+ unsigned int i, j, len;
+
+ static const struct option opts[] = {
+ {"socket", 1, 0, 's'},
+ COMMON_LONG_OPTS
+ };
+
+ if (argc != optind + 2) {
+ help("psr-mba-set");
+ return EXIT_FAILURE;
+ }
+
+ libxl_socket_bitmap_alloc(ctx, &target_map, 0);
+ libxl_bitmap_set_none(&target_map);
+
+ SWITCH_FOREACH_OPT(opt, "s:", opts, "psr-mba-set", 0) {
+ case 's':
+ trim(isspace, optarg, &value);
+ split_string_into_string_list(value, ",", &socket_list);
+ len = libxl_string_list_length(&socket_list);
+ for (i = 0; i < len; i++) {
+ parse_range(socket_list[i], &start, &end);
+ for (j = start; j <= end; j++)
+ libxl_bitmap_set(&target_map, j);
+ }
+
+ libxl_string_list_dispose(&socket_list);
+ free(value);
+ break;
+ }
+
+ type = LIBXL_PSR_CBM_TYPE_MBA_THRTL;
+
+ if (libxl_bitmap_is_empty(&target_map))
+ libxl_bitmap_set_any(&target_map);
+
+ domid = find_domain(argv[optind]);
+ thrtl = strtoll(argv[optind + 1], NULL , 0);
+
+ ret = libxl_psr_set_val(ctx, domid, type, &target_map, thrtl);
+
+ libxl_bitmap_dispose(&target_map);
+ return ret;
+}
+
static int psr_mba_hwinfo(void)
{
int rc;
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v9.1 15/16] tools: implement new generic set value interface and MBA set value command
2017-10-20 8:28 ` [PATCH v9 15/16] tools: implement new generic set value interface and MBA set " Yi Sun
@ 2017-12-18 8:31 ` Yi Sun
0 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-12-18 8:31 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Chao Peng, Yi Sun, Ian Jackson, Roger Pau Monné
This patch implements new generic set value interfaces in libxc and libxl.
These interfaces are suitable for all allocation features. It also adds a
new MBA set value command in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
CC: Wei Liu <wei.liu2@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v9.1:
- move argc check to original place to make per socket setting work.
v5:
- move xc_type definition and value get out of the loop.
(suggested by Roger Pau Monné)
v4:
- remove 'ALLOC_' from macro name.
(suggested by Roger Pau Monné)
- adjust place of argc check and return EXIT_FAILURE.
(suggested by Roger Pau Monné)
- fix indentation issue.
(suggested by Roger Pau Monné)
- move same type local variables declaration to a single line.
(suggested by Roger Pau Monné)
v3:
- add 'const' for 'opts[]' in 'main_psr_mba_set'.
(suggested by Roger Pau Monné)
- replace 'libxl_psr_cbm_type' to 'libxl_psr_type' for newly defined
interfaces.
(suggested by Roger Pau Monné)
---
tools/libxc/include/xenctrl.h | 6 ++---
tools/libxc/xc_psr.c | 9 ++++---
tools/libxl/libxl_psr.c | 52 ++++++++++++++++++++--------------------
tools/xl/xl.h | 1 +
tools/xl/xl_cmdtable.c | 6 +++++
tools/xl/xl_psr.c | 55 +++++++++++++++++++++++++++++++++++++++++++
6 files changed, 96 insertions(+), 33 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index fc0d4d2..90bee20 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2532,9 +2532,9 @@ int xc_psr_cmt_get_data(xc_interface *xch, uint32_t rmid, uint32_t cpu,
uint64_t *tsc);
int xc_psr_cmt_enabled(xc_interface *xch);
-int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t data);
+int xc_psr_set_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t data);
int xc_psr_get_domain_data(xc_interface *xch, uint32_t domid,
xc_psr_type type, uint32_t target,
uint64_t *data);
diff --git a/tools/libxc/xc_psr.c b/tools/libxc/xc_psr.c
index 37a6feb..1a0ab63 100644
--- a/tools/libxc/xc_psr.c
+++ b/tools/libxc/xc_psr.c
@@ -248,9 +248,9 @@ int xc_psr_cmt_enabled(xc_interface *xch)
return 0;
}
-int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
- xc_psr_type type, uint32_t target,
- uint64_t data)
+int xc_psr_set_domain_data(xc_interface *xch, uint32_t domid,
+ xc_psr_type type, uint32_t target,
+ uint64_t data)
{
DECLARE_DOMCTL;
uint32_t cmd;
@@ -269,6 +269,9 @@ int xc_psr_cat_set_domain_data(xc_interface *xch, uint32_t domid,
case XC_PSR_CAT_L2_CBM:
cmd = XEN_DOMCTL_PSR_SET_L2_CBM;
break;
+ case XC_PSR_MBA_THRTL:
+ cmd = XEN_DOMCTL_PSR_SET_MBA_THRTL;
+ break;
default:
errno = EINVAL;
return -1;
diff --git a/tools/libxl/libxl_psr.c b/tools/libxl/libxl_psr.c
index 7c560bc..9ced7d1 100644
--- a/tools/libxl/libxl_psr.c
+++ b/tools/libxl/libxl_psr.c
@@ -328,32 +328,7 @@ int libxl_psr_cat_set_cbm(libxl_ctx *ctx, uint32_t domid,
libxl_psr_cbm_type type, libxl_bitmap *target_map,
uint64_t cbm)
{
- GC_INIT(ctx);
- int rc;
- int socketid, nr_sockets;
-
- rc = libxl__count_physical_sockets(gc, &nr_sockets);
- if (rc) {
- LOGED(ERROR, domid, "failed to get system socket count");
- goto out;
- }
-
- libxl_for_each_set_bit(socketid, *target_map) {
- xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
-
- if (socketid >= nr_sockets)
- break;
-
- if (xc_psr_cat_set_domain_data(ctx->xch, domid, xc_type,
- socketid, cbm)) {
- libxl__psr_alloc_log_err_msg(gc, errno, type);
- rc = ERROR_FAIL;
- }
- }
-
-out:
- GC_FREE;
- return rc;
+ return libxl_psr_set_val(ctx, domid, type, target_map, cbm);
}
int libxl_psr_cat_get_cbm(libxl_ctx *ctx, uint32_t domid,
@@ -453,7 +428,30 @@ int libxl_psr_set_val(libxl_ctx *ctx, uint32_t domid,
libxl_psr_type type, libxl_bitmap *target_map,
uint64_t val)
{
- return ERROR_FAIL;
+ GC_INIT(ctx);
+ int rc, socketid, nr_sockets;
+ xc_psr_type xc_type = libxl__psr_type_to_libxc_psr_type(type);
+
+ rc = libxl__count_physical_sockets(gc, &nr_sockets);
+ if (rc) {
+ LOG(ERROR, "failed to get system socket count");
+ goto out;
+ }
+
+ libxl_for_each_set_bit(socketid, *target_map) {
+ if (socketid >= nr_sockets)
+ break;
+
+ if (xc_psr_set_domain_data(ctx->xch, domid, xc_type,
+ socketid, val)) {
+ libxl__psr_alloc_log_err_msg(gc, errno, type);
+ rc = ERROR_FAIL;
+ }
+ }
+
+out:
+ GC_FREE;
+ return rc;
}
int libxl_psr_get_val(libxl_ctx *ctx, uint32_t domid,
diff --git a/tools/xl/xl.h b/tools/xl/xl.h
index a72458b..4e784ff 100644
--- a/tools/xl/xl.h
+++ b/tools/xl/xl.h
@@ -208,6 +208,7 @@ int main_psr_cmt_detach(int argc, char **argv);
int main_psr_cmt_show(int argc, char **argv);
int main_psr_cat_cbm_set(int argc, char **argv);
int main_psr_cat_show(int argc, char **argv);
+int main_psr_mba_set(int argc, char **argv);
int main_psr_mba_show(int argc, char **argv);
#endif
int main_qemu_monitor_command(int argc, char **argv);
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index fb9e918..6d89439 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -586,6 +586,12 @@ struct cmd_spec cmd_table[] = {
"[options] <Domain>",
"-l <level> Specify the cache level to process, otherwise L3 cache is processed\n"
},
+ { "psr-mba-set",
+ &main_psr_mba_set, 0, 1,
+ "Set throttling value (THRTL) for a domain",
+ "[options] <Domain> <THRTL>",
+ "-s <socket> Specify the socket to process, otherwise all sockets are processed\n"
+ },
{ "psr-mba-show",
&main_psr_mba_show, 0, 1,
"Show Memory Bandwidth Allocation information",
diff --git a/tools/xl/xl_psr.c b/tools/xl/xl_psr.c
index 0eedbc7..7aff474 100644
--- a/tools/xl/xl_psr.c
+++ b/tools/xl/xl_psr.c
@@ -552,6 +552,61 @@ int main_psr_mba_show(int argc, char **argv)
return psr_val_show(domid, LIBXL_PSR_FEAT_TYPE_MBA, 0);
}
+int main_psr_mba_set(int argc, char **argv)
+{
+ uint32_t domid;
+ libxl_psr_type type;
+ uint64_t thrtl;
+ int ret, opt = 0;
+ libxl_bitmap target_map;
+ char *value;
+ libxl_string_list socket_list;
+ unsigned long start, end;
+ unsigned int i, j, len;
+
+ static const struct option opts[] = {
+ {"socket", 1, 0, 's'},
+ COMMON_LONG_OPTS
+ };
+
+ libxl_socket_bitmap_alloc(ctx, &target_map, 0);
+ libxl_bitmap_set_none(&target_map);
+
+ SWITCH_FOREACH_OPT(opt, "s:", opts, "psr-mba-set", 0) {
+ case 's':
+ trim(isspace, optarg, &value);
+ split_string_into_string_list(value, ",", &socket_list);
+ len = libxl_string_list_length(&socket_list);
+ for (i = 0; i < len; i++) {
+ parse_range(socket_list[i], &start, &end);
+ for (j = start; j <= end; j++)
+ libxl_bitmap_set(&target_map, j);
+ }
+
+ libxl_string_list_dispose(&socket_list);
+ free(value);
+ break;
+ }
+
+ type = LIBXL_PSR_CBM_TYPE_MBA_THRTL;
+
+ if (libxl_bitmap_is_empty(&target_map))
+ libxl_bitmap_set_any(&target_map);
+
+ if (argc != optind + 2) {
+ help("psr-mba-set");
+ return EXIT_FAILURE;
+ }
+
+ domid = find_domain(argv[optind]);
+ thrtl = strtoll(argv[optind + 1], NULL , 0);
+
+ ret = libxl_psr_set_val(ctx, domid, type, &target_map, thrtl);
+
+ libxl_bitmap_dispose(&target_map);
+ return ret;
+}
+
static int psr_mba_hwinfo(void)
{
int rc;
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH v9 16/16] docs: add MBA description in docs
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (14 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 15/16] tools: implement new generic set value interface and MBA set " Yi Sun
@ 2017-10-20 8:28 ` Yi Sun
2017-12-05 2:53 ` [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
16 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-10-20 8:28 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson, Chao Peng, Yi Sun, Wei Liu, Roger Pau Monné
This patch adds MBA description in related documents.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
v5:
- remove 'closed-loop' in 'xl-psr.markdown'
(suggested by Roger Pau Monné)
v4:
- modify description of MBA in 'xl.pod.1.in' to be same as feature doc.
(suggested by Roger Pau Monné)
- fix words issue.
(suggested by Roger Pau Monné)
v2:
- state the value type shown by 'psr-mba-show'. For linear mode,
it shows decimal value. For non-linear mode, it shows hexadecimal
value.
(suggested by Chao Peng)
---
docs/man/xl.pod.1.in | 33 +++++++++++++++++++++++++
docs/misc/xl-psr.markdown | 62 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+)
diff --git a/docs/man/xl.pod.1.in b/docs/man/xl.pod.1.in
index 486a24f..7fd35c9 100644
--- a/docs/man/xl.pod.1.in
+++ b/docs/man/xl.pod.1.in
@@ -1850,6 +1850,39 @@ processed.
=back
+=head2 Memory Bandwidth Allocation
+
+Intel Skylake and later server platforms offer capabilities to configure and
+make use of the Memory Bandwidth Allocation (MBA) mechanisms, which provides
+OS/VMMs the ability to slow misbehaving apps/VMs by using a credit-based
+throttling mechanism. In the Xen implementation, MBA is used to control memory
+bandwidth on VM basis. To enforce bandwidth on a specific domain, just set
+throttling value (THRTL) for the domain.
+
+=over 4
+
+=item B<psr-mba-set> [I<OPTIONS>] I<domain-id> I<thrtl>
+
+Set throttling value (THRTL) for a domain. For how to specify I<thrtl>
+please refer to L<http://xenbits.xen.org/docs/unstable/misc/xl-psr.html>.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-s SOCKET>, B<--socket=SOCKET>
+
+Specify the socket to process, otherwise all sockets are processed.
+
+=back
+
+=item B<psr-mba-show> [I<domain-id>]
+
+Show MBA settings for a certain domain or all domains. For linear mode, it
+shows the decimal value. For non-linear mode, it shows hexadecimal value.
+
+=back
+
=head1 IGNORED FOR COMPATIBILITY WITH XM
xl is mostly command-line compatible with the old xm utility used with
diff --git a/docs/misc/xl-psr.markdown b/docs/misc/xl-psr.markdown
index 04dd957..3d196ed 100644
--- a/docs/misc/xl-psr.markdown
+++ b/docs/misc/xl-psr.markdown
@@ -186,6 +186,68 @@ Setting data CBM for a domain:
Setting the same code and data CBM for a domain:
`xl psr-cat-set <domid> <cbm>`
+## Memory Bandwidth Allocation (MBA)
+
+Memory Bandwidth Allocation (MBA) is a new feature available on Intel
+Skylake and later server platforms that allows an OS or Hypervisor/VMM to
+slow misbehaving apps/VMs by using a credit-based throttling mechanism. To
+enforce bandwidth on a specific domain, just set throttling value (THRTL)
+into Class of Service (COS). MBA provides two THRTL mode. One is linear mode
+and the other is non-linear mode.
+
+In the linear mode the input precision is defined as 100-(THRTL_MAX). Values
+not an even multiple of the precision (e.g., 12%) will be rounded down (e.g.,
+to 10% delay by the hardware).
+
+If linear values are not supported then input delay values are powers-of-two
+from zero to the THRTL_MAX value from CPUID. In this case any values not a power
+of two will be rounded down the next nearest power of two.
+
+For example, assuming a system with 2 domains:
+
+ * A THRTL of 0x0 for every domain means each domain can access the whole cache
+ without any delay. This is the default.
+
+ * Linear mode: Giving one domain a THRTL of 0xC and the other domain's 0 means
+ that the first domain gets 10% delay to access the cache and the other one
+ without any delay.
+
+ * Non-linear mode: Giving one domain a THRTL of 0xC and the other domain's 0
+ means that the first domain gets 8% delay to access the cache and the other
+ one without any delay.
+
+For more detailed information please refer to Intel SDM chapter
+"Introduction to Memory Bandwidth Allocation".
+
+In Xen's implementation, THRTL can be configured with libxl/xl interfaces but
+COS is maintained in hypervisor only. The cache partition granularity is per
+domain, each domain has COS=0 assigned by default, the corresponding THRTL is
+0, which means all the cache resource can be accessed without delay.
+
+### xl interfaces
+
+System MBA information such as maximum COS and maximum THRTL can be obtained by:
+
+`xl psr-hwinfo --mba`
+
+The simplest way to change a domain's THRTL from its default is running:
+
+`xl psr-mba-set [OPTIONS] <domid> <thrtl>`
+
+In a multi-socket system, the same thrtl will be set on each socket by default.
+Per socket thrtl can be specified with the `--socket SOCKET` option.
+
+Setting the THRTL may not be successful if insufficient COS is available. In
+such case unused COS(es) may be freed by setting THRTL of all related domains to
+its default value(0).
+
+Per domain THRTL settings can be shown by:
+
+`xl psr-mba-show [OPTIONS] <domid>`
+
+For linear mode, it shows the decimal value. For non-linear mode, it shows
+hexadecimal value.
+
## Reference
[1] Intel SDM
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen
2017-10-20 8:28 [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
` (15 preceding siblings ...)
2017-10-20 8:28 ` [PATCH v9 16/16] docs: add MBA description in docs Yi Sun
@ 2017-12-05 2:53 ` Yi Sun
2017-12-05 9:09 ` Jan Beulich
16 siblings, 1 reply; 31+ messages in thread
From: Yi Sun @ 2017-12-05 2:53 UTC (permalink / raw)
To: xen-devel
Cc: Wei Liu, Andrew Cooper, Ian Jackson, Julien Grall, Jan Beulich,
Chao Peng, Daniel De Graaf, Roger Pau Monné
Hi,
This patch set has got all Acked-by/Reviewed-by months ago. So, I am
wondering when it can be integrated? Any plan? Thanks!
BRs,
Sun Yi
> ---
> Acked and Reviewed list before V9:
>
> a - Acked-by
> r - Reviewed-by
>
> r patch 1 - docs: create Memory Bandwidth Allocation (MBA) feature document
> ar patch 2 - Rename PSR sysctl/domctl interfaces and xsm policy to make them be general
> ar patch 3 - x86: rename 'cbm_type' to 'psr_type' to make it general
> ar patch 4 - x86: a few optimizations to psr codes
> r patch 5 - x86: implement data structure and CPU init flow for MBA
> ar patch 6 - x86: implement get hw info flow for MBA
> ar patch 7 - x86: implement get value interface for MBA
> r patch 8 - x86: implement set value flow for MBA
> ar patch 9 - tools: create general interfaces to support psr allocation features
> ar patch 10 - tools: implement the new libxc get hw info interface
> ar patch 11 - tools: implement the new libxl get hw info interface
> ar patch 12 - tools: implement the new xl get hw info interface
> ar patch 13 - tools: rename 'xc_psr_cat_type' to 'xc_psr_type'
> ar patch 14 - tools: implement new generic get value interface and MBA get value command
> ar patch 15 - tools: implement new generic set value interface and MBA set value command
> ar patch 16 - docs: add MBA description in docs
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen
2017-12-05 2:53 ` [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen Yi Sun
@ 2017-12-05 9:09 ` Jan Beulich
2017-12-05 9:21 ` Yi Sun
0 siblings, 1 reply; 31+ messages in thread
From: Jan Beulich @ 2017-12-05 9:09 UTC (permalink / raw)
To: Yi Sun
Cc: Wei Liu, Andrew Cooper, Ian Jackson, Julien Grall, xen-devel,
Chao Peng, Daniel De Graaf, Roger Pau Monné
>>> On 05.12.17 at 03:53, <yi.y.sun@linux.intel.com> wrote:
> This patch set has got all Acked-by/Reviewed-by months ago. So, I am
> wondering when it can be integrated? Any plan? Thanks!
It is not being forgotten. But the tree is not fully open yet, so it is
subject to the judgment of committers whether any patch (or
series) is suitable of committing at this point. A 16-patch series imo
clearly isn't. Please be a little more patient - even once the tree is
fully open, a few working days should be allowed for everyone
to deal with backlog, before sending pings merely related to
patches (not) going in right away.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v9 00/16] Enable Memory Bandwidth Allocation in Xen
2017-12-05 9:09 ` Jan Beulich
@ 2017-12-05 9:21 ` Yi Sun
0 siblings, 0 replies; 31+ messages in thread
From: Yi Sun @ 2017-12-05 9:21 UTC (permalink / raw)
To: Jan Beulich
Cc: Wei Liu, Andrew Cooper, Ian Jackson, Julien Grall, xen-devel,
Chao Peng, Daniel De Graaf, Roger Pau Monné
On 17-12-05 02:09:14, Jan Beulich wrote:
> >>> On 05.12.17 at 03:53, <yi.y.sun@linux.intel.com> wrote:
> > This patch set has got all Acked-by/Reviewed-by months ago. So, I am
> > wondering when it can be integrated? Any plan? Thanks!
>
> It is not being forgotten. But the tree is not fully open yet, so it is
> subject to the judgment of committers whether any patch (or
> series) is suitable of committing at this point. A 16-patch series imo
> clearly isn't. Please be a little more patient - even once the tree is
> fully open, a few working days should be allowed for everyone
> to deal with backlog, before sending pings merely related to
> patches (not) going in right away.
>
Got it, thanks! Just want to know the plan or flow.
> Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 31+ messages in thread