From: Chao Gao <chao.gao@intel.com>
To: xen-devel@lists.xen.org
Cc: "Lan Tianyu" <tianyu.lan@intel.com>,
"Kevin Tian" <kevin.tian@intel.com>,
"Stefano Stabellini" <sstabellini@kernel.org>,
"Wei Liu" <wei.liu2@citrix.com>,
"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
"George Dunlap" <george.dunlap@eu.citrix.com>,
"Ian Jackson" <ian.jackson@eu.citrix.com>,
"Tim Deegan" <tim@xen.org>, "Jan Beulich" <jbeulich@suse.com>,
"Andrew Cooper" <andrew.cooper3@citrix.com>,
"Chao Gao" <chao.gao@intel.com>,
"Roger Pau Monné" <roger.pau@citrix.com>
Subject: [PATCH v4 11/28] x86/vvtd: Process interrupt remapping request
Date: Fri, 17 Nov 2017 14:22:18 +0800 [thread overview]
Message-ID: <1510899755-40237-12-git-send-email-chao.gao@intel.com> (raw)
In-Reply-To: <1510899755-40237-1-git-send-email-chao.gao@intel.com>
When a remapping interrupt request arrives, remapping hardware computes the
interrupt_index per the algorithm described in VTD spec
"Interrupt Remapping Table", interprets the IRTE and generates a remapped
interrupt request.
This patch introduces viommu_handle_irq_request() to emulate the process how
remapping hardware handles a remapping interrupt request. This patch
also introduces a counter inflight_intr, which is used to count the number
of interrupt are being handled. The reason why we should have this
counter is VT-d hardware should drain in-flight interrups before setting
flags to show that some operations are completed. These operations
include enabling interrupt remapping and performing a kind of invalidation
requests. In vvtd, we also try to drain in-flight interrupts by waiting
the inflight_intr is decreased to 0.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
---
v4:
- use "#define" to define interrupt remapping transition faults
rather than using an enum
- use switch-case rather than if-else in irq_remapping_request_index()
and vvtd_irq_request_sanity_check()
- introduce a counter inflight_intr
v3:
- Encode map_guest_page()'s error into void* to avoid using another parameter
---
xen/drivers/passthrough/vtd/iommu.h | 15 +++
xen/drivers/passthrough/vtd/vvtd.c | 219 ++++++++++++++++++++++++++++++++++++
2 files changed, 234 insertions(+)
diff --git a/xen/drivers/passthrough/vtd/iommu.h b/xen/drivers/passthrough/vtd/iommu.h
index 9c59aeb..82edd2a 100644
--- a/xen/drivers/passthrough/vtd/iommu.h
+++ b/xen/drivers/passthrough/vtd/iommu.h
@@ -216,6 +216,15 @@
#define dma_frcd_source_id(c) (c & 0xffff)
#define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */
+/* Interrupt remapping transition faults */
+#define VTD_FR_IR_REQ_RSVD 0x20
+#define VTD_FR_IR_INDEX_OVER 0x21
+#define VTD_FR_IR_ENTRY_P 0x22
+#define VTD_FR_IR_ROOT_INVAL 0x23
+#define VTD_FR_IR_IRTE_RSVD 0x24
+#define VTD_FR_IR_REQ_COMPAT 0x25
+#define VTD_FR_IR_SID_ERR 0x26
+
/*
* 0: Present
* 1-11: Reserved
@@ -356,6 +365,12 @@ struct iremap_entry {
};
/*
+ * When VT-d doesn't enable extended interrupt mode, hardware interprets
+ * 8-bits ([15:8]) of Destination-ID field in the IRTEs.
+ */
+#define IRTE_xAPIC_DEST_MASK 0xff00
+
+/*
* Posted-interrupt descriptor address is 64 bits with 64-byte aligned, only
* the upper 26 bits of lest significiant 32 bits is available.
*/
diff --git a/xen/drivers/passthrough/vtd/vvtd.c b/xen/drivers/passthrough/vtd/vvtd.c
index 06e522a..927e715 100644
--- a/xen/drivers/passthrough/vtd/vvtd.c
+++ b/xen/drivers/passthrough/vtd/vvtd.c
@@ -22,11 +22,15 @@
#include <xen/types.h>
#include <xen/viommu.h>
#include <xen/xmalloc.h>
+#include <asm/apic.h>
#include <asm/current.h>
+#include <asm/event.h>
+#include <asm/io_apic.h>
#include <asm/hvm/domain.h>
#include <asm/p2m.h>
#include "iommu.h"
+#include "vtd.h"
/* Supported capabilities by vvtd */
#define VVTD_MAX_CAPS VIOMMU_CAP_IRQ_REMAPPING
@@ -52,6 +56,8 @@ struct vvtd {
uint64_t base_addr;
/* Point back to the owner domain */
struct domain *domain;
+ /* # of in-flight interrupts */
+ atomic_t inflight_intr;
struct hvm_hw_vvtd hw;
void *irt_base;
@@ -181,6 +187,109 @@ static void unmap_guest_pages(void *va, uint32_t nr)
put_page_and_type(mfn_to_page(mfn[i]));
}
+static int vvtd_delivery(struct domain *d, uint8_t vector,
+ uint32_t dest, bool dest_mode,
+ uint8_t delivery_mode, uint8_t trig_mode)
+{
+ struct vlapic *target;
+ struct vcpu *v;
+
+ switch ( delivery_mode )
+ {
+ case dest_LowestPrio:
+ target = vlapic_lowest_prio(d, NULL, 0, dest, dest_mode);
+ if ( target != NULL )
+ {
+ vvtd_debug("d%d: dest=v%d dlm=%x vector=%d trig_mode=%d\n",
+ vlapic_domain(target)->domain_id,
+ vlapic_vcpu(target)->vcpu_id,
+ delivery_mode, vector, trig_mode);
+ vlapic_set_irq(target, vector, trig_mode);
+ break;
+ }
+ vvtd_debug("d%d: null round robin: vector=%02x\n",
+ d->domain_id, vector);
+ break;
+
+ case dest_Fixed:
+ for_each_vcpu ( d, v )
+ if ( vlapic_match_dest(vcpu_vlapic(v), NULL, 0, dest, dest_mode) )
+ {
+ vvtd_debug("d%d: dest=v%d dlm=%x vector=%d trig_mode=%d\n",
+ v->domain->domain_id, v->vcpu_id,
+ delivery_mode, vector, trig_mode);
+ vlapic_set_irq(vcpu_vlapic(v), vector, trig_mode);
+ }
+ break;
+
+ case dest_NMI:
+ for_each_vcpu ( d, v )
+ if ( vlapic_match_dest(vcpu_vlapic(v), NULL, 0, dest, dest_mode) &&
+ !test_and_set_bool(v->nmi_pending) )
+ vcpu_kick(v);
+ break;
+
+ default:
+ gdprintk(XENLOG_WARNING, "Unsupported VTD delivery mode %d\n",
+ delivery_mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Computing the IRTE index for a given interrupt request. When success, return
+ * 0 and set index to reference the corresponding IRTE. Otherwise, return < 0,
+ * i.e. -1 when the irq request isn't an remapping format.
+ */
+static int irq_remapping_request_index(
+ const struct arch_irq_remapping_request *irq, uint32_t *index)
+{
+ switch ( irq->type )
+ {
+ case VIOMMU_REQUEST_IRQ_MSI:
+ {
+ struct msi_msg_remap_entry msi_msg =
+ {
+ .address_lo = { .val = irq->msg.msi.addr },
+ .data = irq->msg.msi.data,
+ };
+
+ if ( !msi_msg.address_lo.format )
+ return -1;
+
+ *index = (msi_msg.address_lo.index_15 << 15) +
+ msi_msg.address_lo.index_0_14;
+ if ( msi_msg.address_lo.SHV )
+ *index += (uint16_t)msi_msg.data;
+ break;
+ }
+
+ case VIOMMU_REQUEST_IRQ_APIC:
+ {
+ struct IO_APIC_route_remap_entry remap_rte = { .val = irq->msg.rte };
+
+ if ( !remap_rte.format )
+ return -1;
+
+ *index = (remap_rte.index_15 << 15) + remap_rte.index_0_14;
+ break;
+ }
+
+ default:
+ ASSERT_UNREACHABLE();
+ }
+
+ return 0;
+}
+
+static inline uint32_t irte_dest(struct vvtd *vvtd, uint32_t dest)
+{
+ /* In xAPIC mode, only 8-bits([15:8]) are valid */
+ return vvtd->hw.eim_enabled ? dest
+ : MASK_EXTR(dest, IRTE_xAPIC_DEST_MASK);
+}
+
static void write_gcmd_ire(struct vvtd *vvtd, uint32_t val)
{
bool set = val & DMA_GCMD_IRE;
@@ -323,6 +432,115 @@ static const struct hvm_mmio_ops vvtd_mmio_ops = {
.write = vvtd_write
};
+static void vvtd_handle_fault(struct vvtd *vvtd,
+ const struct arch_irq_remapping_request *irq,
+ struct iremap_entry *irte,
+ unsigned int fault)
+{
+ switch ( fault )
+ {
+ case VTD_FR_IR_SID_ERR:
+ case VTD_FR_IR_IRTE_RSVD:
+ case VTD_FR_IR_ENTRY_P:
+ if ( qinval_fault_disable(*irte) )
+ break;
+ /* fall through */
+ case VTD_FR_IR_REQ_RSVD:
+ case VTD_FR_IR_INDEX_OVER:
+ case VTD_FR_IR_ROOT_INVAL:
+ /* TODO: handle fault (e.g. record and report this fault to VM */
+ break;
+
+ default:
+ vvtd_debug("d%d can't handle VT-d fault %x\n", vvtd->domain->domain_id,
+ fault);
+ }
+ return;
+}
+
+static bool vvtd_irq_request_sanity_check(const struct vvtd *vvtd,
+ const struct arch_irq_remapping_request *irq)
+{
+ switch ( irq->type )
+ {
+ case VIOMMU_REQUEST_IRQ_APIC:
+ {
+ struct IO_APIC_route_remap_entry rte = { .val = irq->msg.rte };
+
+ return !rte.reserved;
+ }
+
+ case VIOMMU_REQUEST_IRQ_MSI:
+ return true;
+ }
+
+ ASSERT_UNREACHABLE();
+ return false;
+}
+
+static int vvtd_get_entry(struct vvtd *vvtd,
+ const struct arch_irq_remapping_request *irq,
+ struct iremap_entry *dest)
+{
+ uint32_t entry;
+ struct iremap_entry irte;
+ int ret = irq_remapping_request_index(irq, &entry);
+
+ ASSERT(!ret);
+
+ vvtd_debug("d%d: interpret a request with index %x\n",
+ vvtd->domain->domain_id, entry);
+
+ if ( !vvtd_irq_request_sanity_check(vvtd, irq) )
+ return VTD_FR_IR_REQ_RSVD;
+ else if ( entry > vvtd->hw.irt_max_entry )
+ return VTD_FR_IR_INDEX_OVER;
+ else if ( !vvtd->irt_base )
+ return VTD_FR_IR_ROOT_INVAL;
+
+ irte = ((struct iremap_entry*)vvtd->irt_base)[entry];
+
+ if ( !qinval_present(irte) )
+ ret = VTD_FR_IR_ENTRY_P;
+ else if ( (irte.remap.res_1 || irte.remap.res_2 || irte.remap.res_3 ||
+ irte.remap.res_4) )
+ ret = VTD_FR_IR_IRTE_RSVD;
+
+ /* FIXME: We don't check against the source ID */
+
+ dest->val = irte.val;
+
+ return ret;
+}
+
+static int vvtd_handle_irq_request(const struct domain *d,
+ const struct arch_irq_remapping_request *irq)
+{
+ struct iremap_entry irte;
+ int ret;
+ struct vvtd *vvtd = domain_vvtd(d);
+
+ if ( !vvtd || !vvtd->hw.intremap_enabled )
+ return -ENODEV;
+
+ atomic_inc(&vvtd->inflight_intr);
+ ret = vvtd_get_entry(vvtd, irq, &irte);
+ if ( ret )
+ {
+ vvtd_handle_fault(vvtd, irq, &irte, ret);
+ goto out;
+ }
+
+ ret = vvtd_delivery(vvtd->domain, irte.remap.vector,
+ irte_dest(vvtd, irte.remap.dst),
+ irte.remap.dm, irte.remap.dlm,
+ irte.remap.tm);
+
+ out:
+ atomic_dec(&vvtd->inflight_intr);
+ return ret;
+}
+
static void vvtd_reset(struct vvtd *vvtd)
{
uint64_t cap = cap_set_num_fault_regs(VVTD_FRCD_NUM)
@@ -384,6 +602,7 @@ static int vvtd_destroy(struct viommu *viommu)
static const struct viommu_ops vvtd_hvm_vmx_ops = {
.create = vvtd_create,
.destroy = vvtd_destroy,
+ .handle_irq_request = vvtd_handle_irq_request,
};
REGISTER_VIOMMU(vvtd_hvm_vmx_ops);
--
1.8.3.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-11-17 6:22 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-17 6:22 [PATCH v4 00/28] add vIOMMU support with irq remapping function of virtual VT-d Chao Gao
2017-11-17 6:22 ` [PATCH v4 01/28] Xen/doc: Add Xen virtual IOMMU doc Chao Gao
2018-02-09 12:54 ` Roger Pau Monné
2018-02-09 15:53 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 02/28] VIOMMU: Add vIOMMU framework and vIOMMU domctl Chao Gao
2018-02-09 14:33 ` Roger Pau Monné
2018-02-09 16:13 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 03/28] VIOMMU: Add irq request callback to deal with irq remapping Chao Gao
2018-02-09 15:02 ` Roger Pau Monné
2018-02-09 16:21 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 04/28] VIOMMU: Add get irq info callback to convert irq remapping request Chao Gao
2018-02-09 15:06 ` Roger Pau Monné
2018-02-09 16:34 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 05/28] VIOMMU: Introduce callback of checking irq remapping mode Chao Gao
2018-02-09 15:11 ` Roger Pau Monné
2018-02-09 16:47 ` Chao Gao
2018-02-12 10:21 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 06/28] vtd: clean-up and preparation for vvtd Chao Gao
2018-02-09 15:17 ` Roger Pau Monné
2018-02-09 16:51 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 07/28] x86/hvm: Introduce a emulated VTD for HVM Chao Gao
2018-02-09 16:27 ` Roger Pau Monné
2018-02-09 17:12 ` Chao Gao
2018-02-12 10:35 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 08/28] x86/vvtd: Add MMIO handler for VVTD Chao Gao
2018-02-09 16:39 ` Roger Pau Monné
2018-02-09 17:21 ` Chao Gao
2018-02-09 17:51 ` Roger Pau Monné
2018-02-22 6:20 ` Chao Gao
2018-02-23 17:07 ` Roger Pau Monné
2018-02-23 17:37 ` Wei Liu
2017-11-17 6:22 ` [PATCH v4 09/28] x86/vvtd: Set Interrupt Remapping Table Pointer through GCMD Chao Gao
2018-02-09 16:59 ` Roger Pau Monné
2018-02-11 4:34 ` Chao Gao
2018-02-11 5:09 ` Chao Gao
2018-02-12 11:25 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 10/28] x86/vvtd: Enable Interrupt Remapping " Chao Gao
2018-02-09 17:15 ` Roger Pau Monné
2018-02-11 5:05 ` Chao Gao
2018-02-12 11:30 ` Roger Pau Monné
2018-02-22 6:25 ` Chao Gao
2017-11-17 6:22 ` Chao Gao [this message]
2018-02-09 17:44 ` [PATCH v4 11/28] x86/vvtd: Process interrupt remapping request Roger Pau Monné
2018-02-11 5:31 ` Chao Gao
2018-02-23 17:04 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 12/28] x86/vvtd: decode interrupt attribute from IRTE Chao Gao
2018-02-12 11:55 ` Roger Pau Monné
2018-02-22 6:33 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 13/28] x86/vvtd: add a helper function to decide the interrupt format Chao Gao
2018-02-12 12:14 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 14/28] x86/vvtd: Handle interrupt translation faults Chao Gao
2018-02-12 12:55 ` Roger Pau Monné
2018-02-22 8:23 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 15/28] x86/vvtd: Enable Queued Invalidation through GCMD Chao Gao
2018-02-12 14:04 ` Roger Pau Monné
2018-02-22 10:33 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 16/28] x86/vvtd: Add queued invalidation (QI) support Chao Gao
2018-02-12 14:36 ` Roger Pau Monné
2018-02-23 4:38 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 17/28] x86/vvtd: save and restore emulated VT-d Chao Gao
2018-02-12 14:49 ` Roger Pau Monné
2018-02-23 5:22 ` Chao Gao
2018-02-23 17:19 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 18/28] x86/vioapic: Hook interrupt delivery of vIOAPIC Chao Gao
2018-02-12 14:54 ` Roger Pau Monné
2018-02-24 1:51 ` Chao Gao
2018-02-24 3:17 ` Tian, Kevin
2017-11-17 6:22 ` [PATCH v4 19/28] x86/vioapic: extend vioapic_get_vector() to support remapping format RTE Chao Gao
2018-02-12 15:01 ` Roger Pau Monné
2017-11-17 6:22 ` [PATCH v4 20/28] xen/pt: when binding guest msi, accept the whole msi message Chao Gao
2018-02-12 15:16 ` Roger Pau Monné
2018-02-24 2:20 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 21/28] vvtd: update hvm_gmsi_info when binding guest msi with pirq or Chao Gao
2018-02-12 15:38 ` Roger Pau Monné
2018-02-24 5:05 ` Chao Gao
2017-11-17 6:22 ` [PATCH v4 22/28] x86/vmsi: Hook delivering remapping format msi to guest and handling eoi Chao Gao
2017-11-17 6:22 ` [PATCH v4 23/28] tools/libacpi: Add DMA remapping reporting (DMAR) ACPI table structures Chao Gao
2017-11-17 6:22 ` [PATCH v4 24/28] tools/libacpi: Add new fields in acpi_config for DMAR table Chao Gao
2017-11-17 6:22 ` [PATCH v4 25/28] tools/libxl: Add an user configurable parameter to control vIOMMU attributes Chao Gao
2017-11-17 6:22 ` [PATCH v4 26/28] tools/libxl: build DMAR table for a guest with one virtual VTD Chao Gao
2017-11-17 6:22 ` [PATCH v4 27/28] tools/libxl: create vIOMMU during domain construction Chao Gao
2017-11-17 6:22 ` [PATCH v4 28/28] tools/libxc: Add viommu operations in libxc Chao Gao
2018-10-04 15:51 ` [PATCH v4 00/28] add vIOMMU support with irq remapping function of virtual VT-d Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510899755-40237-12-git-send-email-chao.gao@intel.com \
--to=chao.gao@intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@eu.citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=kevin.tian@intel.com \
--cc=konrad.wilk@oracle.com \
--cc=roger.pau@citrix.com \
--cc=sstabellini@kernel.org \
--cc=tianyu.lan@intel.com \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).