From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Subject: [PATCH RFC 21/44] x86/smp: Switch to using the percpu IDT mappings
Date: Thu, 4 Jan 2018 20:21:46 +0000 [thread overview]
Message-ID: <1515097329-31902-22-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1515097329-31902-1-git-send-email-andrew.cooper3@citrix.com>
The loading of IDTR is moved out of load_system_tables() and into
early_switch_to_idle().
One complication for the BSP is that IST references still need to remain
uninitalised until reinit_bsp_stack(). Therefore, early_switch_to_idle() is
extended to take a bsp boolean.
For VT-x guests, HOST_IDTR_BASE needs altering, so a #VMExit doesn't change
the mappings we use. As this is now a compile-time constant, it moves from
vmx_set_host_env() to construct_vmcs() to avoid rewriting it on every context
switch.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
xen/arch/x86/cpu/common.c | 8 --------
xen/arch/x86/hvm/vmx/vmcs.c | 4 +++-
xen/arch/x86/setup.c | 24 ++++++++++++++++++++++--
xen/arch/x86/smpboot.c | 2 +-
xen/include/asm-x86/system.h | 2 +-
5 files changed, 27 insertions(+), 13 deletions(-)
diff --git a/xen/arch/x86/cpu/common.c b/xen/arch/x86/cpu/common.c
index b18e0f4..14743b6 100644
--- a/xen/arch/x86/cpu/common.c
+++ b/xen/arch/x86/cpu/common.c
@@ -644,7 +644,6 @@ void __init early_cpu_init(void)
*/
void load_system_tables(void)
{
- unsigned int cpu = smp_processor_id();
unsigned long stack_bottom = get_stack_bottom(),
stack_top = stack_bottom & ~(STACK_SIZE - 1);
@@ -658,10 +657,6 @@ void load_system_tables(void)
.base = (unsigned long)gdt,
.limit = LAST_RESERVED_GDT_BYTE,
};
- const struct desc_ptr idtr = {
- .base = (unsigned long)idt_tables[cpu],
- .limit = (IDT_ENTRIES * sizeof(idt_entry_t)) - 1,
- };
*tss = (struct tss_struct){
/* Main stack for interrupts/exceptions. */
@@ -699,12 +694,9 @@ void load_system_tables(void)
SYS_DESC_tss_busy);
lgdt(&gdtr);
- lidt(&idtr);
ltr(TSS_ENTRY << 3);
lldt(0);
- enable_each_ist(idt_tables[cpu]);
-
/*
* Bottom-of-stack must be 16-byte aligned!
*
diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c
index e7818ca..f99f1bb 100644
--- a/xen/arch/x86/hvm/vmx/vmcs.c
+++ b/xen/arch/x86/hvm/vmx/vmcs.c
@@ -804,7 +804,6 @@ static void vmx_set_host_env(struct vcpu *v)
__vmwrite(HOST_GDTR_BASE,
(unsigned long)(this_cpu(gdt_table) - FIRST_RESERVED_GDT_ENTRY));
- __vmwrite(HOST_IDTR_BASE, (unsigned long)idt_tables[cpu]);
__vmwrite(HOST_TR_BASE, (unsigned long)&per_cpu(init_tss, cpu));
@@ -1133,6 +1132,9 @@ static int construct_vmcs(struct vcpu *v)
/* Disable PML anyway here as it will only be enabled in log dirty mode */
v->arch.hvm_vmx.secondary_exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
+ /* Host system tables. */
+ __vmwrite(HOST_IDTR_BASE, PERCPU_IDT_MAPPING);
+
/* Host data selectors. */
__vmwrite(HOST_SS_SELECTOR, __HYPERVISOR_DS);
__vmwrite(HOST_DS_SELECTOR, __HYPERVISOR_DS);
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 5fa70bd..662c383 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -237,12 +237,25 @@ void __init discard_initial_images(void)
extern char __init_begin[], __init_end[], __bss_start[], __bss_end[];
-void early_switch_to_idle(void)
+void early_switch_to_idle(bool bsp)
{
unsigned int cpu = smp_processor_id();
struct vcpu *v = idle_vcpu[cpu];
unsigned long cr4 = read_cr4();
+ /*
+ * VT-x hardwires the IDT limit at 0xffff on VMExit.
+ *
+ * We don't wish to reload on vcpu context switch, so have arranged for
+ * nothing else to live within 64k of the base. Unilaterally setting the
+ * limit to 0xffff avoids leaking whether HVM vcpus are running to PV
+ * guests via SIDT.
+ */
+ const struct desc_ptr idtr = {
+ .base = PERCPU_IDT_MAPPING,
+ .limit = 0xffff,
+ };
+
set_current(v);
per_cpu(curr_vcpu, cpu) = v;
@@ -257,12 +270,17 @@ void early_switch_to_idle(void)
: "memory" );
per_cpu(curr_ptbase, cpu) = v->arch.cr3;
+
+ lidt(&idtr);
+
+ if ( likely(!bsp) ) /* BSP IST setup deferred. */
+ enable_each_ist(idt_tables[cpu]);
}
static void __init init_idle_domain(void)
{
scheduler_init();
- early_switch_to_idle();
+ early_switch_to_idle(true);
}
void srat_detect_node(int cpu)
@@ -631,6 +649,8 @@ static void __init noreturn reinit_bsp_stack(void)
/* Update TSS and ISTs */
load_system_tables();
+ enable_each_ist(idt_tables[0]);
+
/* Update SYSCALL trampolines */
percpu_traps_init();
diff --git a/xen/arch/x86/smpboot.c b/xen/arch/x86/smpboot.c
index 4df7775..7f02dd8 100644
--- a/xen/arch/x86/smpboot.c
+++ b/xen/arch/x86/smpboot.c
@@ -311,7 +311,7 @@ void start_secondary(void *unused)
set_processor_id(cpu);
get_cpu_info()->cr4 = XEN_MINIMAL_CR4;
- early_switch_to_idle();
+ early_switch_to_idle(false);
rdmsrl(MSR_EFER, this_cpu(efer));
diff --git a/xen/include/asm-x86/system.h b/xen/include/asm-x86/system.h
index ee57631..5cf8827 100644
--- a/xen/include/asm-x86/system.h
+++ b/xen/include/asm-x86/system.h
@@ -230,7 +230,7 @@ static inline int local_irq_is_enabled(void)
void trap_init(void);
void init_idt_traps(void);
-void early_switch_to_idle(void);
+void early_switch_to_idle(bool bsp);
void load_system_tables(void);
void percpu_traps_init(void);
void subarch_percpu_traps_init(void);
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-01-04 20:21 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 20:21 [PATCH FAIRLY-RFC 00/44] x86: Prerequisite work for a Xen KAISER solution Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 01/44] passthrough/vtd: Don't DMA to the stack in queue_invalidate_wait() Andrew Cooper
2018-01-05 9:21 ` Jan Beulich
2018-01-05 9:33 ` Andrew Cooper
2018-01-16 6:41 ` Tian, Kevin
2018-01-04 20:21 ` [PATCH RFC 02/44] x86/idt: Factor out enabling and disabling of ISTs Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 03/44] x86/pv: Rename invalidate_shadow_ldt() to pv_destroy_ldt() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 04/44] x86/boot: Introduce cpu_smpboot_bsp() to dynamically allocate BSP state Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 05/44] x86/boot: Move arch_init_memory() earlier in the boot sequence Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 06/44] x86/boot: Allocate percpu pagetables for the idle vcpus Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 07/44] x86/boot: Use " Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 08/44] x86/pv: Avoid an opencoded mov to %cr3 in toggle_guest_mode() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 09/44] x86/mm: Track the current %cr3 in a per_cpu variable Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 10/44] x86/pt-shadow: Initial infrastructure for L4 PV pagetable shadowing Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 11/44] x86/pt-shadow: Always set _PAGE_ACCESSED on L4e updates Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 12/44] x86/fixmap: Temporarily add a percpu fixmap range Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 13/44] x86/pt-shadow: Shadow L4 tables from 64bit PV guests Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 14/44] x86/mm: Added safety checks that pagetables aren't shared Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 15/44] x86: Rearrange the virtual layout to introduce a PERCPU linear slot Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 16/44] xen/ipi: Introduce arch_ipi_param_ok() to check IPI parameters Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 17/44] x86/smp: Infrastructure for allocating and freeing percpu pagetables Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 18/44] x86/mm: Maintain the correct percpu mappings on context switch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 19/44] x86/boot: Defer TSS/IST setup until later during boot on the BSP Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 20/44] x86/smp: Allocate a percpu linear range for the IDT Andrew Cooper
2018-01-04 20:21 ` Andrew Cooper [this message]
2018-01-04 20:21 ` [PATCH RFC 22/44] x86/mm: Track whether the current cr3 has a short or extended directmap Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 23/44] x86/smp: Allocate percpu resources for map_domain_page() to use Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 24/44] x86/mapcache: Reimplement map_domain_page() from scratch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 25/44] x86/fixmap: Drop percpu fixmap range Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 26/44] x86/pt-shadow: Maintain a small cache of shadowed frames Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 27/44] x86/smp: Allocate a percpu linear range for the compat translation area Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 28/44] x86/xlat: Use the percpu " Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 29/44] x86/smp: Allocate percpu resources for the GDT and LDT Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 30/44] x86/pv: Break handle_ldt_mapping_fault() out of handle_gdt_ldt_mapping_fault() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 31/44] x86/pv: Drop support for paging out the LDT Andrew Cooper
2018-01-24 11:04 ` Jan Beulich
2018-01-04 20:21 ` [PATCH RFC 32/44] x86: Always reload the LDT on vcpu context switch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 33/44] x86/smp: Use the percpu GDT/LDT mappings Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 34/44] x86: Drop the PERDOMAIN mappings Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 35/44] x86/smp: Allocate the stack in the percpu range Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 36/44] x86/monitor: Capture Xen's intent to use monitor at boot time Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 37/44] x86/misc: Move some IPI parameters off the stack Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 38/44] x86/mca: Move __HYPERVISOR_mca " Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 39/44] x86/smp: Introduce get_smp_ipi_buf() and take more " Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 40/44] x86/boot: Switch the APs to the percpu pagetables before entering C Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 41/44] x86/smp: Switch to using the percpu stacks Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 42/44] x86/smp: Allocate a percpu linear range for the TSS Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 43/44] x86/smp: Use the percpu TSS mapping Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 44/44] misc debugging Andrew Cooper
2018-01-05 7:48 ` [PATCH FAIRLY-RFC 00/44] x86: Prerequisite work for a Xen KAISER solution Juergen Gross
2018-01-05 9:26 ` Andrew Cooper
2018-01-05 9:39 ` Juergen Gross
2018-01-05 9:56 ` Andrew Cooper
2018-01-05 14:11 ` George Dunlap
2018-01-05 14:17 ` Juergen Gross
2018-01-05 14:21 ` George Dunlap
2018-01-05 14:28 ` Jan Beulich
2018-01-05 14:27 ` Jan Beulich
2018-01-05 14:35 ` Andrew Cooper
2018-01-08 11:41 ` George Dunlap
2018-01-09 23:14 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515097329-31902-22-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).