xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Subject: [PATCH RFC 05/44] x86/boot: Move arch_init_memory() earlier in the boot sequence
Date: Thu, 4 Jan 2018 20:21:30 +0000	[thread overview]
Message-ID: <1515097329-31902-6-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1515097329-31902-1-git-send-email-andrew.cooper3@citrix.com>

idle_pg_table[] needs all slots populated before it is copied to create the
vcpu idle pagetables.  One missing slot is for MMCFG, which is now allocated
early.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
 xen/arch/x86/setup.c     |  4 ++--
 xen/arch/x86/x86_64/mm.c | 15 +++++++++++++++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 64286f7..4aff5bd 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -1502,6 +1502,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
     if ( cpu_has_fsgsbase )
         set_in_cr4(X86_CR4_FSGSBASE);
 
+    arch_init_memory();
+
     cpu_smpboot_bsp();
 
     init_idle_domain();
@@ -1512,8 +1514,6 @@ void __init noreturn __start_xen(unsigned long mbi_p)
 
     early_time_init();
 
-    arch_init_memory();
-
     alternative_instructions();
 
     local_irq_enable();
diff --git a/xen/arch/x86/x86_64/mm.c b/xen/arch/x86/x86_64/mm.c
index 9b37da6..68eee30 100644
--- a/xen/arch/x86/x86_64/mm.c
+++ b/xen/arch/x86/x86_64/mm.c
@@ -831,6 +831,7 @@ static int extend_frame_table(struct mem_hotadd_info *info)
 void __init subarch_init_memory(void)
 {
     unsigned long i, n, v, m2p_start_mfn;
+    l4_pgentry_t *pl4e;
     l3_pgentry_t l3e;
     l2_pgentry_t l2e;
 
@@ -886,6 +887,20 @@ void __init subarch_init_memory(void)
         }
     }
 
+    /* Create an L3 table for the MMCFG region, or remap it NX. */
+    pl4e = &idle_pg_table[l4_table_offset(PCI_MCFG_VIRT_START)];
+    if ( !(l4e_get_flags(*pl4e) & _PAGE_PRESENT) )
+    {
+        l3_pgentry_t *l3t = alloc_xen_pagetable();
+
+        BUG_ON(!l3t);
+
+        clear_page(l3t);
+        *pl4e = l4e_from_paddr(virt_to_maddr(l3t), __PAGE_HYPERVISOR_RW);
+    }
+    else
+        l4e_add_flags(*pl4e, _PAGE_NX_BIT);
+
     /* Mark all of direct map NX if hardware supports it. */
     if ( !cpu_has_nx )
         return;
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2018-01-04 20:21 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-04 20:21 [PATCH FAIRLY-RFC 00/44] x86: Prerequisite work for a Xen KAISER solution Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 01/44] passthrough/vtd: Don't DMA to the stack in queue_invalidate_wait() Andrew Cooper
2018-01-05  9:21   ` Jan Beulich
2018-01-05  9:33     ` Andrew Cooper
2018-01-16  6:41   ` Tian, Kevin
2018-01-04 20:21 ` [PATCH RFC 02/44] x86/idt: Factor out enabling and disabling of ISTs Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 03/44] x86/pv: Rename invalidate_shadow_ldt() to pv_destroy_ldt() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 04/44] x86/boot: Introduce cpu_smpboot_bsp() to dynamically allocate BSP state Andrew Cooper
2018-01-04 20:21 ` Andrew Cooper [this message]
2018-01-04 20:21 ` [PATCH RFC 06/44] x86/boot: Allocate percpu pagetables for the idle vcpus Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 07/44] x86/boot: Use " Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 08/44] x86/pv: Avoid an opencoded mov to %cr3 in toggle_guest_mode() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 09/44] x86/mm: Track the current %cr3 in a per_cpu variable Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 10/44] x86/pt-shadow: Initial infrastructure for L4 PV pagetable shadowing Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 11/44] x86/pt-shadow: Always set _PAGE_ACCESSED on L4e updates Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 12/44] x86/fixmap: Temporarily add a percpu fixmap range Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 13/44] x86/pt-shadow: Shadow L4 tables from 64bit PV guests Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 14/44] x86/mm: Added safety checks that pagetables aren't shared Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 15/44] x86: Rearrange the virtual layout to introduce a PERCPU linear slot Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 16/44] xen/ipi: Introduce arch_ipi_param_ok() to check IPI parameters Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 17/44] x86/smp: Infrastructure for allocating and freeing percpu pagetables Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 18/44] x86/mm: Maintain the correct percpu mappings on context switch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 19/44] x86/boot: Defer TSS/IST setup until later during boot on the BSP Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 20/44] x86/smp: Allocate a percpu linear range for the IDT Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 21/44] x86/smp: Switch to using the percpu IDT mappings Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 22/44] x86/mm: Track whether the current cr3 has a short or extended directmap Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 23/44] x86/smp: Allocate percpu resources for map_domain_page() to use Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 24/44] x86/mapcache: Reimplement map_domain_page() from scratch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 25/44] x86/fixmap: Drop percpu fixmap range Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 26/44] x86/pt-shadow: Maintain a small cache of shadowed frames Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 27/44] x86/smp: Allocate a percpu linear range for the compat translation area Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 28/44] x86/xlat: Use the percpu " Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 29/44] x86/smp: Allocate percpu resources for the GDT and LDT Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 30/44] x86/pv: Break handle_ldt_mapping_fault() out of handle_gdt_ldt_mapping_fault() Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 31/44] x86/pv: Drop support for paging out the LDT Andrew Cooper
2018-01-24 11:04   ` Jan Beulich
2018-01-04 20:21 ` [PATCH RFC 32/44] x86: Always reload the LDT on vcpu context switch Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 33/44] x86/smp: Use the percpu GDT/LDT mappings Andrew Cooper
2018-01-04 20:21 ` [PATCH RFC 34/44] x86: Drop the PERDOMAIN mappings Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 35/44] x86/smp: Allocate the stack in the percpu range Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 36/44] x86/monitor: Capture Xen's intent to use monitor at boot time Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 37/44] x86/misc: Move some IPI parameters off the stack Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 38/44] x86/mca: Move __HYPERVISOR_mca " Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 39/44] x86/smp: Introduce get_smp_ipi_buf() and take more " Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 40/44] x86/boot: Switch the APs to the percpu pagetables before entering C Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 41/44] x86/smp: Switch to using the percpu stacks Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 42/44] x86/smp: Allocate a percpu linear range for the TSS Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 43/44] x86/smp: Use the percpu TSS mapping Andrew Cooper
2018-01-04 20:22 ` [PATCH RFC 44/44] misc debugging Andrew Cooper
2018-01-05  7:48 ` [PATCH FAIRLY-RFC 00/44] x86: Prerequisite work for a Xen KAISER solution Juergen Gross
2018-01-05  9:26   ` Andrew Cooper
2018-01-05  9:39     ` Juergen Gross
2018-01-05  9:56       ` Andrew Cooper
2018-01-05 14:11       ` George Dunlap
2018-01-05 14:17         ` Juergen Gross
2018-01-05 14:21           ` George Dunlap
2018-01-05 14:28             ` Jan Beulich
2018-01-05 14:27         ` Jan Beulich
2018-01-05 14:35           ` Andrew Cooper
2018-01-08 11:41             ` George Dunlap
2018-01-09 23:14   ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515097329-31902-6-git-send-email-andrew.cooper3@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).