From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: Stefano Stabellini <stefanos@xilinx.com>,
sstabellini@kernel.org, andrii_anisov@epam.com,
xen-devel@lists.xen.org
Subject: [PATCH v2 17/21] xen/arm: refactor vpl011_data_avail
Date: Fri, 6 Jul 2018 16:12:12 -0700 [thread overview]
Message-ID: <1530918736-13965-17-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1807061523160.13502@sstabellini-ThinkPad-X260>
Move the code to calculate in_fifo_level and out_fifo_level out of
vpl011_data_avail, to the caller.
This change will make it possible to reuse vpl011_data_avail with
different ring structures in a later patch.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
---
Changes in v2:
- new patch
---
xen/arch/arm/vpl011.c | 70 ++++++++++++++++++++++++++++++---------------------
1 file changed, 42 insertions(+), 28 deletions(-)
diff --git a/xen/arch/arm/vpl011.c b/xen/arch/arm/vpl011.c
index 33fcaa0..e75957f 100644
--- a/xen/arch/arm/vpl011.c
+++ b/xen/arch/arm/vpl011.c
@@ -34,6 +34,12 @@
#include <asm/vgic-emul.h>
#include <asm/vpl011.h>
+static void vpl011_data_avail(struct domain *d,
+ XENCONS_RING_IDX in_fifo_level,
+ XENCONS_RING_IDX in_size,
+ XENCONS_RING_IDX out_fifo_level,
+ XENCONS_RING_IDX out_size);
+
/*
* Since pl011 registers are 32-bit registers, all registers
* are handled similarly allowing 8-bit, 16-bit and 32-bit
@@ -378,30 +384,13 @@ static const struct mmio_handler_ops vpl011_mmio_handler = {
.write = vpl011_mmio_write,
};
-static void vpl011_data_avail(struct domain *d)
+static void vpl011_data_avail(struct domain *d,
+ XENCONS_RING_IDX in_fifo_level,
+ XENCONS_RING_IDX in_size,
+ XENCONS_RING_IDX out_fifo_level,
+ XENCONS_RING_IDX out_size)
{
- unsigned long flags;
struct vpl011 *vpl011 = &d->arch.vpl011;
- struct xencons_interface *intf = vpl011->ring.ring_buf;
- XENCONS_RING_IDX in_cons, in_prod, out_cons, out_prod;
- XENCONS_RING_IDX in_fifo_level, out_fifo_level;
-
- VPL011_LOCK(d, flags);
-
- in_cons = intf->in_cons;
- in_prod = intf->in_prod;
- out_cons = intf->out_cons;
- out_prod = intf->out_prod;
-
- smp_rmb();
-
- in_fifo_level = xencons_queued(in_prod,
- in_cons,
- sizeof(intf->in));
-
- out_fifo_level = xencons_queued(out_prod,
- out_cons,
- sizeof(intf->out));
/**** Update the UART RX state ****/
@@ -410,11 +399,11 @@ static void vpl011_data_avail(struct domain *d)
vpl011->uartfr &= ~RXFE;
/* Set the FIFO_FULL bit if the Xen buffer is full. */
- if ( in_fifo_level == sizeof(intf->in) )
+ if ( in_fifo_level == in_size )
vpl011->uartfr |= RXFF;
/* Assert the RX interrupt if the FIFO is more than half way filled. */
- if ( in_fifo_level >= sizeof(intf->in) - SBSA_UART_FIFO_LEVEL )
+ if ( in_fifo_level >= in_size - SBSA_UART_FIFO_LEVEL )
vpl011->uartris |= RXI;
/*
@@ -427,7 +416,7 @@ static void vpl011_data_avail(struct domain *d)
/**** Update the UART TX state ****/
- if ( out_fifo_level != sizeof(intf->out) )
+ if ( out_fifo_level != out_size )
{
vpl011->uartfr &= ~TXFF;
@@ -445,13 +434,38 @@ static void vpl011_data_avail(struct domain *d)
if ( out_fifo_level == 0 )
vpl011->uartfr |= TXFE;
-
- VPL011_UNLOCK(d, flags);
}
static void vpl011_notification(struct vcpu *v, unsigned int port)
{
- vpl011_data_avail(v->domain);
+ unsigned long flags;
+ struct domain *d = v->domain;
+ struct vpl011 *vpl011 = &d->arch.vpl011;
+ struct xencons_interface *intf = vpl011->ring.ring_buf;
+ XENCONS_RING_IDX in_cons, in_prod, out_cons, out_prod;
+ XENCONS_RING_IDX in_fifo_level, out_fifo_level;
+
+ VPL011_LOCK(d, flags);
+
+ in_cons = intf->in_cons;
+ in_prod = intf->in_prod;
+ out_cons = intf->out_cons;
+ out_prod = intf->out_prod;
+
+ smp_rmb();
+
+ in_fifo_level = xencons_queued(in_prod,
+ in_cons,
+ sizeof(intf->in));
+
+ out_fifo_level = xencons_queued(out_prod,
+ out_cons,
+ sizeof(intf->out));
+
+ vpl011_data_avail(v->domain, in_fifo_level, sizeof(intf->in),
+ out_fifo_level, sizeof(intf->out));
+
+ VPL011_UNLOCK(d, flags);
}
int domain_vpl011_init(struct domain *d, struct vpl011_init_info *info)
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-07-06 23:12 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 23:11 [PATCH v2 00/21] dom0less step1: boot multiple domains from device tree Stefano Stabellini
2018-07-06 23:11 ` [PATCH v2 01/21] xen/arm: rename get_11_allocation_size to get_allocation_size Stefano Stabellini
2018-07-09 12:55 ` Julien Grall
2018-07-11 20:09 ` Stefano Stabellini
2018-07-06 23:11 ` [PATCH v2 02/21] xen/arm: make allocate_memory work for non 1:1 mapped guests Stefano Stabellini
2018-07-09 13:43 ` Julien Grall
2018-07-09 23:02 ` Stefano Stabellini
2018-07-10 17:57 ` Julien Grall
2018-07-11 21:42 ` Stefano Stabellini
2018-07-09 13:58 ` Julien Grall
2018-07-09 23:10 ` Stefano Stabellini
2018-07-23 18:01 ` Andrii Anisov
2018-07-23 18:32 ` Stefano Stabellini
2018-07-24 12:09 ` Andrii Anisov
2018-07-06 23:11 ` [PATCH v2 03/21] xen: allow console_io hypercalls from certain DomUs Stefano Stabellini
2018-07-09 13:48 ` Julien Grall
2018-07-17 20:05 ` Stefano Stabellini
2018-07-17 20:26 ` Julien Grall
2018-07-18 17:10 ` Stefano Stabellini
2018-07-19 9:19 ` Julien Grall
2018-08-17 19:41 ` Daniel De Graaf
2018-07-06 23:11 ` [PATCH v2 04/21] xen/arm: move a few DT related defines to public/device_tree_defs.h Stefano Stabellini
2018-07-09 13:59 ` Julien Grall
2018-07-06 23:12 ` [PATCH v2 05/21] xen/arm: extend device tree based multiboot protocol Stefano Stabellini
2018-07-09 14:07 ` Julien Grall
2018-07-13 22:41 ` Stefano Stabellini
2018-07-16 14:14 ` Julien Grall
2018-07-16 22:02 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 06/21] xen/arm: do not pass dt_host to make_memory_node and make_hypervisor_node Stefano Stabellini
2018-07-09 14:11 ` Julien Grall
2018-07-09 21:51 ` Stefano Stabellini
2018-07-10 17:28 ` Julien Grall
2018-07-11 20:33 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 07/21] xen/arm: rename acpi_make_chosen_node to make_chosen_node Stefano Stabellini
2018-07-09 14:12 ` Julien Grall
2018-07-06 23:12 ` [PATCH v2 08/21] xen/arm: increase MAX_MODULES Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 09/21] xen/arm: move cmdline out of boot_modules Stefano Stabellini
2018-07-09 14:53 ` Julien Grall
2018-07-10 0:00 ` Stefano Stabellini
2018-07-10 21:11 ` Julien Grall
2018-07-13 0:04 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 10/21] xen/arm: don't add duplicate boot modules Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 11/21] xen/arm: probe domU kernels and initrds Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 12/21] xen/arm: refactor construct_dom0 Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 13/21] xen/arm: introduce construct_domU Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 14/21] xen/arm: generate a simple device tree for domUs Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 15/21] xen/arm: generate vpl011 node on device tree for domU Stefano Stabellini
2018-07-12 18:14 ` Julien Grall
2018-07-13 21:24 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 16/21] xen/arm: introduce a union in vpl011 Stefano Stabellini
2018-07-06 23:12 ` Stefano Stabellini [this message]
2018-07-24 9:58 ` [PATCH v2 17/21] xen/arm: refactor vpl011_data_avail Julien Grall
2018-07-27 22:37 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 18/21] xen/arm: Allow vpl011 to be used by DomU Stefano Stabellini
2018-07-24 11:00 ` Julien Grall
2018-07-27 0:10 ` Stefano Stabellini
2018-07-27 11:00 ` Julien Grall
2018-07-27 21:42 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 19/21] xen/arm: introduce create_domUs Stefano Stabellini
2018-07-16 16:10 ` Jan Beulich
2018-07-16 21:44 ` Stefano Stabellini
2018-07-24 13:53 ` Julien Grall
2018-07-28 2:42 ` Stefano Stabellini
2018-07-30 10:26 ` Julien Grall
2018-07-30 18:15 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 20/21] xen: support console_switching between Dom0 and DomUs on ARM Stefano Stabellini
2018-07-16 16:19 ` Jan Beulich
2018-07-16 21:55 ` Stefano Stabellini
2018-07-17 6:37 ` Jan Beulich
2018-07-17 16:43 ` Stefano Stabellini
2018-07-18 6:41 ` Jan Beulich
2018-07-18 16:51 ` Stefano Stabellini
2018-07-17 8:40 ` Jan Beulich
2018-07-17 16:33 ` Stefano Stabellini
2018-07-17 20:29 ` Julien Grall
2018-07-18 7:12 ` Jan Beulich
2018-07-18 16:59 ` Julien Grall
2018-07-19 6:10 ` Jan Beulich
2018-07-19 17:18 ` Stefano Stabellini
2018-07-18 17:01 ` Stefano Stabellini
2018-07-18 20:37 ` George Dunlap
2018-07-17 20:34 ` Julien Grall
2018-07-18 17:31 ` Stefano Stabellini
2018-07-06 23:12 ` [PATCH v2 21/21] xen/arm: split domain_build.c Stefano Stabellini
2018-07-12 18:18 ` [PATCH v2 00/21] dom0less step1: boot multiple domains from device tree Julien Grall
2018-07-13 20:54 ` Stefano Stabellini
2018-07-18 16:48 ` Julien Grall
2018-07-18 17:48 ` Stefano Stabellini
2018-07-23 17:13 ` Julien Grall
2018-07-23 17:52 ` Stefano Stabellini
2018-07-23 17:14 ` Andrii Anisov
2018-07-23 17:55 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530918736-13965-17-git-send-email-sstabellini@kernel.org \
--to=sstabellini@kernel.org \
--cc=andrii_anisov@epam.com \
--cc=julien.grall@arm.com \
--cc=stefanos@xilinx.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).