* [PATCH v8 01/11] arm: remove the ARM HDLCD driver
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3 Stefano Stabellini
` (10 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall; +Cc: sstabellini, andrii_anisov, xen-devel
The ARM HDLCD driver is unused. The device itself can only be found on
Virtual Express boards that are for early development only. Remove the
driver.
Also remove vexpress_syscfg, now unused, and "select VIDEO" that is not
useful anymore.
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
---
Changes in v3:
- remove "select VIDEO"
- remove vexpress_syscfg
Changes in v2:
- patch added
---
xen/arch/arm/Kconfig | 2 -
xen/arch/arm/platforms/vexpress.c | 35 ----
xen/drivers/video/Kconfig | 3 -
xen/drivers/video/Makefile | 1 -
xen/drivers/video/arm_hdlcd.c | 281 -------------------------------
xen/include/asm-arm/platforms/vexpress.h | 6 -
6 files changed, 328 deletions(-)
delete mode 100644 xen/drivers/video/arm_hdlcd.c
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 8174c0c..4dc7ef5 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -17,12 +17,10 @@ config ARM_64
config ARM
def_bool y
select HAS_ALTERNATIVE
- select HAS_ARM_HDLCD
select HAS_DEVICE_TREE
select HAS_MEM_ACCESS
select HAS_PASSTHROUGH
select HAS_PDX
- select VIDEO
config ARCH_DEFCONFIG
string
diff --git a/xen/arch/arm/platforms/vexpress.c b/xen/arch/arm/platforms/vexpress.c
index 70839d6..b6193f7 100644
--- a/xen/arch/arm/platforms/vexpress.c
+++ b/xen/arch/arm/platforms/vexpress.c
@@ -59,41 +59,6 @@ static inline int vexpress_ctrl_start(uint32_t *syscfg, int write,
return 0;
}
-int vexpress_syscfg(int write, int function, int device, uint32_t *data)
-{
- uint32_t *syscfg = (uint32_t *) FIXMAP_ADDR(FIXMAP_MISC);
- int ret = -1;
-
- set_fixmap(FIXMAP_MISC, maddr_to_mfn(V2M_SYS_MMIO_BASE),
- PAGE_HYPERVISOR_NOCACHE);
-
- if ( syscfg[V2M_SYS_CFGCTRL/4] & V2M_SYS_CFG_START )
- goto out;
-
- /* clear the complete bit in the V2M_SYS_CFGSTAT status register */
- syscfg[V2M_SYS_CFGSTAT/4] = 0;
-
- if ( write )
- {
- /* write data */
- syscfg[V2M_SYS_CFGDATA/4] = *data;
-
- if ( vexpress_ctrl_start(syscfg, write, function, device) < 0 )
- goto out;
- } else {
- if ( vexpress_ctrl_start(syscfg, write, function, device) < 0 )
- goto out;
- else
- /* read data */
- *data = syscfg[V2M_SYS_CFGDATA/4];
- }
-
- ret = 0;
-out:
- clear_fixmap(FIXMAP_MISC);
- return ret;
-}
-
/*
* TODO: Get base address from the device tree
* See arm,vexpress-reset node
diff --git a/xen/drivers/video/Kconfig b/xen/drivers/video/Kconfig
index 52e8ce6..41ca503 100644
--- a/xen/drivers/video/Kconfig
+++ b/xen/drivers/video/Kconfig
@@ -11,6 +11,3 @@ config VGA
Enable VGA output for the Xen hypervisor.
If unsure, say Y.
-
-config HAS_ARM_HDLCD
- bool
diff --git a/xen/drivers/video/Makefile b/xen/drivers/video/Makefile
index 2bb91d6..2b3fc76 100644
--- a/xen/drivers/video/Makefile
+++ b/xen/drivers/video/Makefile
@@ -4,4 +4,3 @@ obj-$(CONFIG_VIDEO) += font_8x16.o
obj-$(CONFIG_VIDEO) += font_8x8.o
obj-$(CONFIG_VIDEO) += lfb.o
obj-$(CONFIG_VGA) += vesa.o
-obj-$(CONFIG_HAS_ARM_HDLCD) += arm_hdlcd.o
diff --git a/xen/drivers/video/arm_hdlcd.c b/xen/drivers/video/arm_hdlcd.c
deleted file mode 100644
index e1174b2..0000000
--- a/xen/drivers/video/arm_hdlcd.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * xen/drivers/video/arm_hdlcd.c
- *
- * Driver for ARM HDLCD Controller
- *
- * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
- * Copyright (c) 2013 Citrix Systems.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/delay.h>
-#include <asm/types.h>
-#include <asm/platforms/vexpress.h>
-#include <xen/device_tree.h>
-#include <xen/libfdt/libfdt.h>
-#include <xen/init.h>
-#include <xen/mm.h>
-#include "font.h"
-#include "lfb.h"
-#include "modelines.h"
-
-#define HDLCD ((volatile uint32_t *) FIXMAP_ADDR(FIXMAP_MISC))
-
-#define HDLCD_INTMASK (0x18/4)
-#define HDLCD_FBBASE (0x100/4)
-#define HDLCD_LINELENGTH (0x104/4)
-#define HDLCD_LINECOUNT (0x108/4)
-#define HDLCD_LINEPITCH (0x10C/4)
-#define HDLCD_BUS (0x110/4)
-#define HDLCD_VSYNC (0x200/4)
-#define HDLCD_VBACK (0x204/4)
-#define HDLCD_VDATA (0x208/4)
-#define HDLCD_VFRONT (0x20C/4)
-#define HDLCD_HSYNC (0x210/4)
-#define HDLCD_HBACK (0x214/4)
-#define HDLCD_HDATA (0x218/4)
-#define HDLCD_HFRONT (0x21C/4)
-#define HDLCD_POLARITIES (0x220/4)
-#define HDLCD_COMMAND (0x230/4)
-#define HDLCD_PF (0x240/4)
-#define HDLCD_RED (0x244/4)
-#define HDLCD_GREEN (0x248/4)
-#define HDLCD_BLUE (0x24C/4)
-
-struct color_masks {
- int red_shift;
- int red_size;
- int green_shift;
- int green_size;
- int blue_shift;
- int blue_size;
-};
-
-struct pixel_colors {
- const char* bpp;
- struct color_masks colors;
-};
-
-struct pixel_colors __initdata colors[] = {
- { "16", { 0, 5, 11, 5, 6, 5 } },
- { "24", { 0, 8, 16, 8, 8, 8 } },
- { "32", { 0, 8, 16, 8, 8, 8 } },
-};
-
-static void vga_noop_puts(const char *s) {}
-void (*video_puts)(const char *) = vga_noop_puts;
-
-static void hdlcd_flush(void)
-{
- dsb(sy);
-}
-
-static int __init get_color_masks(const char* bpp, struct color_masks **masks)
-{
- int i;
- for ( i = 0; i < ARRAY_SIZE(colors); i++ )
- {
- if ( !strncmp(colors[i].bpp, bpp, 2) )
- {
- *masks = &colors[i].colors;
- return 0;
- }
- }
- return -1;
-}
-
-static void __init set_pixclock(uint32_t pixclock)
-{
- if ( dt_find_compatible_node(NULL, NULL, "arm,vexpress") )
- vexpress_syscfg(1, V2M_SYS_CFG_OSC_FUNC,
- V2M_SYS_CFG_OSC5, &pixclock);
-}
-
-void __init video_init(void)
-{
- struct lfb_prop lfbp;
- unsigned char *lfb;
- paddr_t hdlcd_start, hdlcd_size;
- paddr_t framebuffer_start, framebuffer_size;
- const char *mode_string;
- char _mode_string[16];
- int bytes_per_pixel = 4;
- struct color_masks *c = NULL;
- struct modeline *videomode = NULL;
- int i;
- const struct dt_device_node *dev;
- const __be32 *cells;
- u32 lenp;
- int res;
-
- dev = dt_find_compatible_node(NULL, NULL, "arm,hdlcd");
-
- if ( !dev )
- {
- printk("HDLCD: Cannot find node compatible with \"arm,hdcld\"\n");
- return;
- }
-
- res = dt_device_get_address(dev, 0, &hdlcd_start, &hdlcd_size);
- if ( !res )
- {
- printk("HDLCD: Unable to retrieve MMIO base address\n");
- return;
- }
-
- cells = dt_get_property(dev, "framebuffer", &lenp);
- if ( !cells )
- {
- printk("HDLCD: Unable to retrieve framebuffer property\n");
- return;
- }
-
- framebuffer_start = dt_next_cell(dt_n_addr_cells(dev), &cells);
- framebuffer_size = dt_next_cell(dt_n_size_cells(dev), &cells);
-
- if ( !hdlcd_start )
- {
- printk(KERN_ERR "HDLCD: address missing from device tree, disabling driver\n");
- return;
- }
-
- if ( !framebuffer_start )
- {
- printk(KERN_ERR "HDLCD: framebuffer address missing from device tree, disabling driver\n");
- return;
- }
-
- res = dt_property_read_string(dev, "mode", &mode_string);
- if ( res )
- {
- get_color_masks("32", &c);
- memcpy(_mode_string, "1280x1024@60", strlen("1280x1024@60") + 1);
- bytes_per_pixel = 4;
- }
- else if ( strlen(mode_string) < strlen("800x600@60") ||
- strlen(mode_string) > sizeof(_mode_string) - 1 )
- {
- printk(KERN_ERR "HDLCD: invalid modeline=%s\n", mode_string);
- return;
- } else {
- char *s = strchr(mode_string, '-');
- if ( !s )
- {
- printk(KERN_INFO "HDLCD: bpp not found in modeline %s, assume 32 bpp\n",
- mode_string);
- get_color_masks("32", &c);
- memcpy(_mode_string, mode_string, strlen(mode_string) + 1);
- bytes_per_pixel = 4;
- } else {
- if ( strlen(s) < 6 )
- {
- printk(KERN_ERR "HDLCD: invalid mode %s\n", mode_string);
- return;
- }
- s++;
- if ( get_color_masks(s, &c) < 0 )
- {
- printk(KERN_WARNING "HDLCD: unsupported bpp %s\n", s);
- return;
- }
- bytes_per_pixel = simple_strtoll(s, NULL, 10) / 8;
- }
- i = s - mode_string - 1;
- memcpy(_mode_string, mode_string, i);
- memcpy(_mode_string + i, mode_string + i + 3, 4);
- }
-
- for ( i = 0; i < ARRAY_SIZE(videomodes); i++ ) {
- if ( !strcmp(_mode_string, videomodes[i].mode) )
- {
- videomode = &videomodes[i];
- break;
- }
- }
- if ( !videomode )
- {
- printk(KERN_WARNING "HDLCD: unsupported videomode %s\n",
- _mode_string);
- return;
- }
-
- if ( framebuffer_size < bytes_per_pixel * videomode->xres * videomode->yres )
- {
- printk(KERN_ERR "HDLCD: the framebuffer is too small, disabling the HDLCD driver\n");
- return;
- }
-
- printk(KERN_INFO "Initializing HDLCD driver\n");
-
- lfb = ioremap_wc(framebuffer_start, framebuffer_size);
- if ( !lfb )
- {
- printk(KERN_ERR "Couldn't map the framebuffer\n");
- return;
- }
- memset(lfb, 0x00, bytes_per_pixel * videomode->xres * videomode->yres);
-
- /* uses FIXMAP_MISC */
- set_pixclock(videomode->pixclock);
-
- set_fixmap(FIXMAP_MISC, maddr_to_mfn(hdlcd_start), PAGE_HYPERVISOR_NOCACHE);
- HDLCD[HDLCD_COMMAND] = 0;
-
- HDLCD[HDLCD_LINELENGTH] = videomode->xres * bytes_per_pixel;
- HDLCD[HDLCD_LINECOUNT] = videomode->yres - 1;
- HDLCD[HDLCD_LINEPITCH] = videomode->xres * bytes_per_pixel;
- HDLCD[HDLCD_PF] = ((bytes_per_pixel - 1) << 3);
- HDLCD[HDLCD_INTMASK] = 0;
- HDLCD[HDLCD_FBBASE] = framebuffer_start;
- HDLCD[HDLCD_BUS] = 0xf00 | (1 << 4);
- HDLCD[HDLCD_VBACK] = videomode->vback - 1;
- HDLCD[HDLCD_VSYNC] = videomode->vsync - 1;
- HDLCD[HDLCD_VDATA] = videomode->yres - 1;
- HDLCD[HDLCD_VFRONT] = videomode->vfront - 1;
- HDLCD[HDLCD_HBACK] = videomode->hback - 1;
- HDLCD[HDLCD_HSYNC] = videomode->hsync - 1;
- HDLCD[HDLCD_HDATA] = videomode->xres - 1;
- HDLCD[HDLCD_HFRONT] = videomode->hfront - 1;
- HDLCD[HDLCD_POLARITIES] = (1 << 2) | (1 << 3);
- HDLCD[HDLCD_RED] = (c->red_size << 8) | c->red_shift;
- HDLCD[HDLCD_GREEN] = (c->green_size << 8) | c->green_shift;
- HDLCD[HDLCD_BLUE] = (c->blue_size << 8) | c->blue_shift;
- HDLCD[HDLCD_COMMAND] = 1;
- clear_fixmap(FIXMAP_MISC);
-
- lfbp.pixel_on = (((1 << c->red_size) - 1) << c->red_shift) |
- (((1 << c->green_size) - 1) << c->green_shift) |
- (((1 << c->blue_size) - 1) << c->blue_shift);
- lfbp.lfb = lfb;
- lfbp.font = &font_vga_8x16;
- lfbp.bits_per_pixel = bytes_per_pixel*8;
- lfbp.bytes_per_line = bytes_per_pixel*videomode->xres;
- lfbp.width = videomode->xres;
- lfbp.height = videomode->yres;
- lfbp.flush = hdlcd_flush;
- lfbp.text_columns = videomode->xres / 8;
- lfbp.text_rows = videomode->yres / 16;
- if ( lfb_init(&lfbp) < 0 )
- return;
- video_puts = lfb_scroll_puts;
-}
-
-void __init video_endboot(void) { }
-
-/*
- * Local variables:
- * mode: C
- * c-file-style: "BSD"
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */
diff --git a/xen/include/asm-arm/platforms/vexpress.h b/xen/include/asm-arm/platforms/vexpress.h
index 5cf3aba..8b45d3a 100644
--- a/xen/include/asm-arm/platforms/vexpress.h
+++ b/xen/include/asm-arm/platforms/vexpress.h
@@ -26,12 +26,6 @@
/* Board-specific: base address of system controller */
#define SP810_ADDRESS 0x1C020000
-#ifndef __ASSEMBLY__
-#include <xen/inttypes.h>
-
-int vexpress_syscfg(int write, int function, int device, uint32_t *data);
-#endif
-
#endif /* __ASM_ARM_PLATFORMS_VEXPRESS_H */
/*
* Local variables:
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 01/11] arm: remove the ARM HDLCD driver Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-31 8:04 ` Jan Beulich
2018-07-30 17:48 ` [PATCH v8 03/11] arm: rename HAS_GICV3 to GICV3 Stefano Stabellini
` (9 subsequent siblings)
11 siblings, 1 reply; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: sstabellini, andrii_anisov, George.Dunlap, andrew.cooper3,
Ian.Jackson, xen-devel, jbeulich
Today it is a silent option. This patch adds a one line description and
makes it optional.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
CC: George.Dunlap@eu.citrix.com
CC: Ian.Jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: andrew.cooper3@citrix.com
---
Changes in v3:
- remove any changes to MEM_ACCESS
- update commit message
Changes in v2:
- make HAS_GICv3 depend on ARM_64
- remove modifications to ARM_HDLCD kconfig, it has been removed
---
xen/arch/arm/Kconfig | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 4dc7ef5..fb69a66 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -12,7 +12,6 @@ config ARM_32
config ARM_64
def_bool y
depends on 64BIT
- select HAS_GICV3
config ARM
def_bool y
@@ -42,6 +41,13 @@ config ACPI
config HAS_GICV3
bool
+ prompt "GICv3 driver"
+ depends on ARM_64
+ default y
+ ---help---
+
+ Driver for the ARM Generic Interrupt Controller v3.
+ If unsure, say Y
config HAS_ITS
bool
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3
2018-07-30 17:48 ` [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3 Stefano Stabellini
@ 2018-07-31 8:04 ` Jan Beulich
2018-07-31 11:07 ` Julien Grall
0 siblings, 1 reply; 21+ messages in thread
From: Jan Beulich @ 2018-07-31 8:04 UTC (permalink / raw)
To: Stefano Stabellini
Cc: andrii_anisov@epam.com, George Dunlap, Andrew Cooper, Ian Jackson,
xen-devel, Julien Grall
>>> On 30.07.18 at 19:48, <sstabellini@kernel.org> wrote:
> Today it is a silent option. This patch adds a one line description and
> makes it optional.
>
> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
> Acked-by: Julien Grall <julien.grall@arm.com>
> CC: George.Dunlap@eu.citrix.com
> CC: Ian.Jackson@eu.citrix.com
> CC: jbeulich@suse.com
> CC: andrew.cooper3@citrix.com
I continue to not understand why I'm being Cc-ed here. Now since I
am, ...
> --- a/xen/arch/arm/Kconfig
> +++ b/xen/arch/arm/Kconfig
> @@ -12,7 +12,6 @@ config ARM_32
> config ARM_64
> def_bool y
> depends on 64BIT
> - select HAS_GICV3
>
> config ARM
> def_bool y
> @@ -42,6 +41,13 @@ config ACPI
>
> config HAS_GICV3
> bool
> + prompt "GICv3 driver"
... why is this not simply
config HAS_GICV3
bool "GICv3 driver"
?
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3
2018-07-31 8:04 ` Jan Beulich
@ 2018-07-31 11:07 ` Julien Grall
0 siblings, 0 replies; 21+ messages in thread
From: Julien Grall @ 2018-07-31 11:07 UTC (permalink / raw)
To: Jan Beulich, Stefano Stabellini
Cc: George Dunlap, Andrew Cooper, andrii_anisov@epam.com, Ian Jackson,
xen-devel
Hi Jan,
On 31/07/18 09:04, Jan Beulich wrote:
>>>> On 30.07.18 at 19:48, <sstabellini@kernel.org> wrote:
>> Today it is a silent option. This patch adds a one line description and
>> makes it optional.
>>
>> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
>> Acked-by: Julien Grall <julien.grall@arm.com>
>> CC: George.Dunlap@eu.citrix.com
>> CC: Ian.Jackson@eu.citrix.com
>> CC: jbeulich@suse.com
>> CC: andrew.cooper3@citrix.com
>
> I continue to not understand why I'm being Cc-ed here. Now since I
> am, ...
>
>> --- a/xen/arch/arm/Kconfig
>> +++ b/xen/arch/arm/Kconfig
>> @@ -12,7 +12,6 @@ config ARM_32
>> config ARM_64
>> def_bool y
>> depends on 64BIT
>> - select HAS_GICV3
>>
>> config ARM
>> def_bool y
>> @@ -42,6 +41,13 @@ config ACPI
>>
>> config HAS_GICV3
>> bool
>> + prompt "GICv3 driver"
>
> ... why is this not simply
>
> config HAS_GICV3
> bool "GICv3 driver"
>
> ?
I can fix that on commit.
Cheers,
>
> Jan
>
>
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v8 03/11] arm: rename HAS_GICV3 to GICV3
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 01/11] arm: remove the ARM HDLCD driver Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3 Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 04/11] Make MEM_ACCESS configurable Stefano Stabellini
` (8 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall; +Cc: sstabellini, andrii_anisov, xen-devel
HAS_GICV3 has become selectable by the user. To mark the change, rename
the option from HAS_GICV3 to GICV3.
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Changes in v3:
- no changes
Changes in v2:
- patch added
---
xen/arch/arm/Kconfig | 4 ++--
xen/arch/arm/Makefile | 4 ++--
xen/arch/arm/vgic.c | 2 +-
xen/arch/arm/vgic/vgic.c | 2 +-
xen/include/asm-arm/gic.h | 4 ++--
xen/include/asm-arm/vgic.h | 4 ++--
6 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index fb69a66..66adce4 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -39,7 +39,7 @@ config ACPI
Advanced Configuration and Power Interface (ACPI) support for Xen is
an alternative to device tree on ARM64.
-config HAS_GICV3
+config GICV3
bool
prompt "GICv3 driver"
depends on ARM_64
@@ -52,7 +52,7 @@ config HAS_GICV3
config HAS_ITS
bool
prompt "GICv3 ITS MSI controller support" if EXPERT = "y"
- depends on HAS_GICV3 && !NEW_VGIC
+ depends on GICV3 && !NEW_VGIC
config NEW_VGIC
bool
diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index a9533b1..b9c2fb7 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -17,7 +17,7 @@ obj-y += domctl.o
obj-$(EARLY_PRINTK) += early_printk.o
obj-y += gic.o
obj-y += gic-v2.o
-obj-$(CONFIG_HAS_GICV3) += gic-v3.o
+obj-$(CONFIG_GICV3) += gic-v3.o
obj-$(CONFIG_HAS_ITS) += gic-v3-its.o
obj-$(CONFIG_HAS_ITS) += gic-v3-lpi.o
obj-y += guestcopy.o
@@ -51,7 +51,7 @@ ifneq ($(CONFIG_NEW_VGIC),y)
obj-y += gic-vgic.o
obj-y += vgic.o
obj-y += vgic-v2.o
-obj-$(CONFIG_HAS_GICV3) += vgic-v3.o
+obj-$(CONFIG_GICV3) += vgic-v3.o
obj-$(CONFIG_HAS_ITS) += vgic-v3-its.o
endif
obj-y += vm_event.o
diff --git a/xen/arch/arm/vgic.c b/xen/arch/arm/vgic.c
index 3fafdd0..7a2c455 100644
--- a/xen/arch/arm/vgic.c
+++ b/xen/arch/arm/vgic.c
@@ -98,7 +98,7 @@ int domain_vgic_register(struct domain *d, int *mmio_count)
{
switch ( d->arch.vgic.version )
{
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
case GIC_V3:
if ( vgic_v3_init(d, mmio_count) )
return -ENODEV;
diff --git a/xen/arch/arm/vgic/vgic.c b/xen/arch/arm/vgic/vgic.c
index a35449b..832632a 100644
--- a/xen/arch/arm/vgic/vgic.c
+++ b/xen/arch/arm/vgic/vgic.c
@@ -974,7 +974,7 @@ unsigned int vgic_max_vcpus(const struct domain *d)
return min_t(unsigned int, MAX_VIRT_CPUS, vgic_vcpu_limit);
}
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
/* Dummy implementation to allow building without actual vGICv3 support. */
void vgic_v3_setup_hw(paddr_t dbase,
unsigned int nr_rdist_regions,
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 58b910f..22fa122 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -166,7 +166,7 @@
#define DT_MATCH_GIC_V3 DT_MATCH_COMPATIBLE("arm,gic-v3")
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
/*
* GICv3 registers that needs to be saved/restored
*/
@@ -194,7 +194,7 @@ struct gic_v2 {
*/
union gic_state_data {
struct gic_v2 v2;
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
struct gic_v3 v3;
#endif
};
diff --git a/xen/include/asm-arm/vgic.h b/xen/include/asm-arm/vgic.h
index 2a58ea3..374fdaa 100644
--- a/xen/include/asm-arm/vgic.h
+++ b/xen/include/asm-arm/vgic.h
@@ -156,7 +156,7 @@ struct vgic_dist {
struct pending_irq *pending_irqs;
/* Base address for guest GIC */
paddr_t dbase; /* Distributor base address */
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
/* GIC V3 addressing */
/* List of contiguous occupied by the redistributors */
struct vgic_rdist_region {
@@ -359,7 +359,7 @@ unsigned int vgic_max_vcpus(const struct domain *d);
void vgic_v2_setup_hw(paddr_t dbase, paddr_t cbase, paddr_t csize,
paddr_t vbase, uint32_t aliased_offset);
-#ifdef CONFIG_HAS_GICV3
+#ifdef CONFIG_GICV3
struct rdist_region;
void vgic_v3_setup_hw(paddr_t dbase,
unsigned int nr_rdist_regions,
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 04/11] Make MEM_ACCESS configurable
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (2 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 03/11] arm: rename HAS_GICV3 to GICV3 Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 05/11] make it possible to enable/disable UART drivers Stefano Stabellini
` (7 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: tim, sstabellini, andrii_anisov, George.Dunlap, andrew.cooper3,
ian.jackson, xen-devel, jbeulich, wei.liu2, dgdegra
Select MEM_ACCESS_ALWAYS_ON on x86 to mark that MEM_ACCESS is not
configurable on x86. Avoid selecting it on ARM.
Rename HAS_MEM_ACCESS to MEM_ACCESS everywhere. Add a prompt and a
description to MEM_ACCESS in xen/common/Kconfig.
The result is that the user-visible option is MEM_ACCESS, and it is
configurable only on ARM (disabled by default). At the moment the
arch-specific mem_access code remains enabled on ARM, even with
MEM_ACCESS=y.
The purpose is to reduce code size. The option doesn't depend on EXPERT
because it would be nice to ecurity-support configurations without
MEM_ACCESS and a non-expert should be able to disable it.
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
CC: dgdegra@tycho.nsa.gov
CC: andrew.cooper3@citrix.com
CC: George.Dunlap@eu.citrix.com
CC: ian.jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: julien.grall@arm.com
CC: konrad.wilk@oracle.com
CC: sstabellini@kernel.org
CC: tim@xen.org
CC: wei.liu2@citrix.com
---
Changes in v5:
- change MEM_ACCESS_ALWAYS_ON to bool
- change default for MEM_ACCESS, default y if MEM_ACCESS_ALWAYS_ON
Changes in v4:
- remove HAS_MEM_ACCESS
- move MEM_ACCESS_ALWAYS_ON to common
- combile default and bool to def_bool
Changes in v3:
- keep HAS_MEM_ACCESS to mark that an arch can do MEM_ACCESS
- introduce MEM_ACCESS_ALWAYS_ON
- the main MEM_ACCESS option is in xen/common/Kconfig
Changes in v2:
- patch added
---
tools/firmware/xen-dir/shim.config | 2 +-
xen/arch/arm/Kconfig | 1 -
xen/arch/x86/Kconfig | 2 +-
xen/common/Kconfig | 10 +++++++++-
xen/common/Makefile | 2 +-
xen/common/domctl.c | 2 +-
xen/include/xen/mem_access.h | 4 ++--
xen/include/xsm/dummy.h | 2 +-
xen/include/xsm/xsm.h | 4 ++--
xen/xsm/dummy.c | 2 +-
xen/xsm/flask/hooks.c | 4 ++--
11 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/tools/firmware/xen-dir/shim.config b/tools/firmware/xen-dir/shim.config
index 4d5630f..21d7075 100644
--- a/tools/firmware/xen-dir/shim.config
+++ b/tools/firmware/xen-dir/shim.config
@@ -29,7 +29,7 @@ CONFIG_COMPAT=y
CONFIG_CORE_PARKING=y
CONFIG_HAS_ALTERNATIVE=y
CONFIG_HAS_EX_TABLE=y
-CONFIG_HAS_MEM_ACCESS=y
+CONFIG_MEM_ACCESS=y
CONFIG_HAS_MEM_PAGING=y
CONFIG_HAS_MEM_SHARING=y
CONFIG_HAS_PDX=y
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 66adce4..2b87111 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -17,7 +17,6 @@ config ARM
def_bool y
select HAS_ALTERNATIVE
select HAS_DEVICE_TREE
- select HAS_MEM_ACCESS
select HAS_PASSTHROUGH
select HAS_PDX
diff --git a/xen/arch/x86/Kconfig b/xen/arch/x86/Kconfig
index f64fc56..9a85fe9 100644
--- a/xen/arch/x86/Kconfig
+++ b/xen/arch/x86/Kconfig
@@ -15,7 +15,7 @@ config X86
select HAS_GDBSX
select HAS_IOPORTS
select HAS_KEXEC
- select HAS_MEM_ACCESS
+ select MEM_ACCESS_ALWAYS_ON
select HAS_MEM_PAGING
select HAS_MEM_SHARING
select HAS_NS16550
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index 9043dce..db6bb2d 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -20,9 +20,17 @@ config HAS_DEVICE_TREE
config HAS_EX_TABLE
bool
-config HAS_MEM_ACCESS
+config MEM_ACCESS_ALWAYS_ON
bool
+config MEM_ACCESS
+ def_bool MEM_ACCESS_ALWAYS_ON
+ prompt "Memory Access and VM events" if !MEM_ACCESS_ALWAYS_ON
+ ---help---
+
+ Framework to configure memory access types for guests and receive
+ related events in userspace.
+
config HAS_MEM_PAGING
bool
diff --git a/xen/common/Makefile b/xen/common/Makefile
index 24d4752..6f2b3fc 100644
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -22,7 +22,7 @@ obj-y += lib.o
obj-$(CONFIG_NEEDS_LIST_SORT) += list_sort.o
obj-$(CONFIG_LIVEPATCH) += livepatch.o livepatch_elf.o
obj-y += lzo.o
-obj-$(CONFIG_HAS_MEM_ACCESS) += mem_access.o
+obj-$(CONFIG_MEM_ACCESS) += mem_access.o
obj-y += memory.o
obj-y += monitor.o
obj-y += multicall.o
diff --git a/xen/common/domctl.c b/xen/common/domctl.c
index 9b7bc08..891ad58 100644
--- a/xen/common/domctl.c
+++ b/xen/common/domctl.c
@@ -1085,7 +1085,7 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
copyback = 1;
break;
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
case XEN_DOMCTL_set_access_required:
if ( unlikely(current->domain == d) ) /* no domain_pause() */
ret = -EPERM;
diff --git a/xen/include/xen/mem_access.h b/xen/include/xen/mem_access.h
index 5ab34c1..7e95eab 100644
--- a/xen/include/xen/mem_access.h
+++ b/xen/include/xen/mem_access.h
@@ -78,7 +78,7 @@ long p2m_set_mem_access_multi(struct domain *d,
*/
int p2m_get_mem_access(struct domain *d, gfn_t gfn, xenmem_access_t *access);
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
int mem_access_memop(unsigned long cmd,
XEN_GUEST_HANDLE_PARAM(xen_mem_access_op_t) arg);
#else
@@ -88,7 +88,7 @@ int mem_access_memop(unsigned long cmd,
{
return -ENOSYS;
}
-#endif /* CONFIG_HAS_MEM_ACCESS */
+#endif /* CONFIG_MEM_ACCESS */
#endif /* _XEN_MEM_ACCESS_H */
diff --git a/xen/include/xsm/dummy.h b/xen/include/xsm/dummy.h
index ff6b2db..b0ac1f6 100644
--- a/xen/include/xsm/dummy.h
+++ b/xen/include/xsm/dummy.h
@@ -584,7 +584,7 @@ static XSM_INLINE int xsm_vm_event_control(XSM_DEFAULT_ARG struct domain *d, int
return xsm_default_action(action, current->domain, d);
}
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
static XSM_INLINE int xsm_mem_access(XSM_DEFAULT_ARG struct domain *d)
{
XSM_ASSERT_ACTION(XSM_DM_PRIV);
diff --git a/xen/include/xsm/xsm.h b/xen/include/xsm/xsm.h
index f0c6fc7..7636bcb 100644
--- a/xen/include/xsm/xsm.h
+++ b/xen/include/xsm/xsm.h
@@ -143,7 +143,7 @@ struct xsm_operations {
int (*vm_event_control) (struct domain *d, int mode, int op);
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
int (*mem_access) (struct domain *d);
#endif
@@ -582,7 +582,7 @@ static inline int xsm_vm_event_control (xsm_default_t def, struct domain *d, int
return xsm_ops->vm_event_control(d, mode, op);
}
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
static inline int xsm_mem_access (xsm_default_t def, struct domain *d)
{
return xsm_ops->mem_access(d);
diff --git a/xen/xsm/dummy.c b/xen/xsm/dummy.c
index 6e75119..3290d04 100644
--- a/xen/xsm/dummy.c
+++ b/xen/xsm/dummy.c
@@ -127,7 +127,7 @@ void __init xsm_fixup_ops (struct xsm_operations *ops)
set_to_dummy_if_null(ops, vm_event_control);
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
set_to_dummy_if_null(ops, mem_access);
#endif
diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
index 78bc326..7a3ccfa 100644
--- a/xen/xsm/flask/hooks.c
+++ b/xen/xsm/flask/hooks.c
@@ -1256,7 +1256,7 @@ static int flask_vm_event_control(struct domain *d, int mode, int op)
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__VM_EVENT);
}
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
static int flask_mem_access(struct domain *d)
{
return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__MEM_ACCESS);
@@ -1803,7 +1803,7 @@ static struct xsm_operations flask_ops = {
.vm_event_control = flask_vm_event_control,
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
.mem_access = flask_mem_access,
#endif
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 05/11] make it possible to enable/disable UART drivers
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (3 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 04/11] Make MEM_ACCESS configurable Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 06/11] arm: make it possible to disable the SMMU driver Stefano Stabellini
` (6 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall; +Cc: sstabellini, andrii_anisov, xen-devel
All the UART drivers are silent options. Add one line descriptions so
that can be de/selected via menuconfig.
Add an x86 dependency to HAS_EHCI: EHCI PCI has not been used on ARM. In
fact, it depends on PCI, and moreover we have drivers for several
embedded UARTs for various ARM boards.
NS16550 remains not selectable on x86.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Changes in v4:
- improve commit message
- remove prompt for HAS_EHCI
Changes in v3:
- NS16550 prompt if ARM
Changes in v2:
- make HAS_EHCI depend on x86
---
xen/drivers/char/Kconfig | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig
index cc78ec3..b1f07f8 100644
--- a/xen/drivers/char/Kconfig
+++ b/xen/drivers/char/Kconfig
@@ -1,11 +1,11 @@
config HAS_NS16550
- bool
+ bool "NS16550 UART driver" if ARM
default y
help
This selects the 16550-series UART support. For most systems, say Y.
config HAS_CADENCE_UART
- bool
+ bool "Xilinx Cadence UART driver"
default y
depends on ARM_64
help
@@ -13,7 +13,7 @@ config HAS_CADENCE_UART
based board, say Y.
config HAS_MVEBU
- bool
+ bool "Marvell MVEBU UART driver"
default y
depends on ARM_64
help
@@ -21,7 +21,7 @@ config HAS_MVEBU
based board, say Y.
config HAS_PL011
- bool
+ bool "ARM PL011 UART driver"
default y
depends on ARM
help
@@ -29,7 +29,7 @@ config HAS_PL011
an Integrator/PP2, Integrator/CP or Versatile platform, say Y.
config HAS_EXYNOS4210
- bool
+ bool "Samsung Exynos 4210 UART driver"
default y
depends on ARM_32
help
@@ -37,7 +37,7 @@ config HAS_EXYNOS4210
Exynos based board, say Y.
config HAS_OMAP
- bool
+ bool "Texas Instruments OMAP UART driver"
default y
depends on ARM_32
help
@@ -45,7 +45,7 @@ config HAS_OMAP
Instruments based CPU, say Y.
config HAS_SCIF
- bool
+ bool "SuperH SCI(F) UART driver"
default y
depends on ARM
help
@@ -54,6 +54,7 @@ config HAS_SCIF
config HAS_EHCI
bool
+ depends on X86
help
This selects the USB based EHCI debug port to be used as a UART. If
you have an x86 based system with USB, say Y.
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 06/11] arm: make it possible to disable the SMMU driver
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (4 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 05/11] make it possible to enable/disable UART drivers Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 07/11] arm: add a tiny kconfig configuration Stefano Stabellini
` (5 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall; +Cc: sstabellini, andrii_anisov, jbeulich, xen-devel
Introduce a Kconfig option for the ARM SMMUv1 and SMMUv2 driver.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
CC: jbeulich@suse.com
---
Changes in v3:
- rename SMMUv2 to ARM_SMMU
- improve help message
- use if ARM
Changes in v2:
- rename HAS_SMMUv2 to SMMUv2
- move SMMUv2 to xen/drivers/passthrough/Kconfig
---
xen/drivers/passthrough/Kconfig | 12 ++++++++++++
xen/drivers/passthrough/arm/Makefile | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/xen/drivers/passthrough/Kconfig b/xen/drivers/passthrough/Kconfig
index 8d90b67..a3c0649 100644
--- a/xen/drivers/passthrough/Kconfig
+++ b/xen/drivers/passthrough/Kconfig
@@ -1,3 +1,15 @@
config HAS_PASSTHROUGH
bool
+
+if ARM
+config ARM_SMMU
+ bool "ARM SMMUv1 and v2 driver"
+ default y
+ ---help---
+ Support for implementations of the ARM System MMU architecture
+ versions 1 and 2.
+
+ Say Y here if your SoC includes an IOMMU device implementing the
+ ARM SMMU architecture.
+endif
diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
index f4cd26e..0156431 100644
--- a/xen/drivers/passthrough/arm/Makefile
+++ b/xen/drivers/passthrough/arm/Makefile
@@ -1,2 +1,2 @@
obj-y += iommu.o
-obj-y += smmu.o
+obj-$(ARM_SMMU) += smmu.o
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 07/11] arm: add a tiny kconfig configuration
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (5 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 06/11] arm: make it possible to disable the SMMU driver Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs Stefano Stabellini
` (4 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall; +Cc: sstabellini, andrii_anisov, xen-devel
Add a tiny kconfig configuration. Enabled only the credit scheduler.
It only carries non-default options (use make menuconfig or make
olddefconfig to produce a complete .config file).
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Changes in v7:
- remove NULL because it is still experimental
---
xen/arch/arm/configs/tiny64.conf | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 xen/arch/arm/configs/tiny64.conf
diff --git a/xen/arch/arm/configs/tiny64.conf b/xen/arch/arm/configs/tiny64.conf
new file mode 100644
index 0000000..aecc55c
--- /dev/null
+++ b/xen/arch/arm/configs/tiny64.conf
@@ -0,0 +1,38 @@
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+
+#
+# Architecture Features
+#
+# CONFIG_GICV3 is not set
+# CONFIG_MEM_ACCESS is not set
+# CONFIG_SBSA_VUART_CONSOLE is not set
+
+#
+# Common Features
+#
+# CONFIG_TMEM is not set
+CONFIG_SCHED_CREDIT=y
+# CONFIG_SCHED_CREDIT2 is not set
+# CONFIG_SCHED_RTDS is not set
+# CONFIG_SCHED_ARINC653 is not set
+# CONFIG_SCHED_NULL is not set
+# CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS is not set
+
+#
+# Device Drivers
+#
+# CONFIG_HAS_NS16550 is not set
+# CONFIG_HAS_CADENCE_UART is not set
+# CONFIG_HAS_MVEBU is not set
+# CONFIG_HAS_PL011 is not set
+# CONFIG_HAS_SCIF is not set
+# CONFIG_ARM_SMMU is not set
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_VERBOSE_DEBUG is not set
+# CONFIG_SCRUB_DEBUG is not set
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (6 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 07/11] arm: add a tiny kconfig configuration Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-31 11:17 ` Julien Grall
2018-08-01 7:25 ` Andrii Anisov
2018-07-30 17:48 ` [PATCH v8 09/11] xen: add per-platform defaults for NR_CPUS Stefano Stabellini
` (3 subsequent siblings)
11 siblings, 2 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: artem_mygaiev, volodymyr_babchuk, sstabellini, andrii_anisov,
xen-devel
Add a "Platform Support" choice with four kconfig options: QEMU, RCAR3,
MPSOC and ALL_PLAT. They enable the required options for their hardware
platform. ALL_PLAT enables all available platforms and it's the default.
It doesn't automatically select any of the related drivers, otherwise
they cannot be disabled. ALL_PLAT is implemented by using hidden options
with default values depending on ALL_PLAT.
In the case of the MPSOC that has a platform file under
arch/arm/platforms/, build the file if MPSOC.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: artem_mygaiev@epam.com
CC: volodymyr_babchuk@epam.com
---
Changes in v8:
- remove QEMU_PLATFORM and RCAR3_PLATFORM that are currently unused
- remove selects from ALL
- rename ALL to ALL_PLAT
- introduce ALL64_PLAT and ALL32_PLAT
Changes in v5:
- turn platform support into a choice
- add ALL
Changes in v4:
- fix GICv3/GICV3
- default y to all options
- build xilinx-zynqmp if MPSOC
---
xen/arch/arm/Kconfig | 2 ++
xen/arch/arm/platforms/Kconfig | 52 +++++++++++++++++++++++++++++++++++++++++
xen/arch/arm/platforms/Makefile | 2 +-
3 files changed, 55 insertions(+), 1 deletion(-)
create mode 100644 xen/arch/arm/platforms/Kconfig
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 2b87111..75cacfb 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -213,6 +213,8 @@ config ARM64_HARDEN_BRANCH_PREDICTOR
config ARM32_HARDEN_BRANCH_PREDICTOR
def_bool y if ARM_32 && HARDEN_BRANCH_PREDICTOR
+source "arch/arm/platforms/Kconfig"
+
source "common/Kconfig"
source "drivers/Kconfig"
diff --git a/xen/arch/arm/platforms/Kconfig b/xen/arch/arm/platforms/Kconfig
new file mode 100644
index 0000000..409d3f8
--- /dev/null
+++ b/xen/arch/arm/platforms/Kconfig
@@ -0,0 +1,52 @@
+choice
+ prompt "Platform Support"
+ default ALL_PLAT
+ ---help---
+ Choose which hardware platform to enable in Xen.
+
+ If unsure, choose ALL_PLAT.
+
+config ALL_PLAT
+ bool "All Platforms"
+ ---help---
+ Enable support for all available hardware platforms. It doesn't
+ automatically select any of the related drivers.
+
+config QEMU
+ bool "QEMU aarch virt machine support"
+ depends on ARM_64
+ select GICV3
+ select HAS_PL011
+ ---help---
+ Enable all the required drivers for QEMU aarch64 virt emulated
+ machine.
+
+config RCAR3
+ bool "Renesas RCar3 support"
+ depends on ARM_64
+ select HAS_SCIF
+ ---help---
+ Enable all the required drivers for Renesas RCar3
+
+config MPSOC
+ bool "Xilinx Ultrascale+ MPSoC support"
+ depends on ARM_64
+ select HAS_CADENCE_UART
+ select ARM_SMMU
+ ---help---
+ Enable all the required drivers for Xilinx Ultrascale+ MPSoC
+
+endchoice
+
+config ALL64_PLAT
+ bool
+ default (ALL_PLAT && ARM_64)
+
+config ALL32_PLAT
+ bool
+ default (ALL_PLAT && ARM_32)
+
+config MPSOC_PLATFORM
+ bool
+ default (ALL64_PLAT || MPSOC)
+
diff --git a/xen/arch/arm/platforms/Makefile b/xen/arch/arm/platforms/Makefile
index 80e555c..a79bdb9 100644
--- a/xen/arch/arm/platforms/Makefile
+++ b/xen/arch/arm/platforms/Makefile
@@ -8,4 +8,4 @@ obj-$(CONFIG_ARM_64) += seattle.o
obj-y += sunxi.o
obj-$(CONFIG_ARM_64) += thunderx.o
obj-$(CONFIG_ARM_64) += xgene-storm.o
-obj-$(CONFIG_ARM_64) += xilinx-zynqmp.o
+obj-$(CONFIG_MPSOC_PLATFORM) += xilinx-zynqmp.o
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
2018-07-30 17:48 ` [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs Stefano Stabellini
@ 2018-07-31 11:17 ` Julien Grall
2018-08-01 7:25 ` Andrii Anisov
1 sibling, 0 replies; 21+ messages in thread
From: Julien Grall @ 2018-07-31 11:17 UTC (permalink / raw)
To: Stefano Stabellini
Cc: artem_mygaiev, volodymyr_babchuk, andrii_anisov, xen-devel
Hi Stefano,
On 30/07/18 18:48, Stefano Stabellini wrote:
> Add a "Platform Support" choice with four kconfig options: QEMU, RCAR3,
> MPSOC and ALL_PLAT. They enable the required options for their hardware
> platform. ALL_PLAT enables all available platforms and it's the default.
> It doesn't automatically select any of the related drivers, otherwise
> they cannot be disabled. ALL_PLAT is implemented by using hidden options
> with default values depending on ALL_PLAT.
>
> In the case of the MPSOC that has a platform file under
> arch/arm/platforms/, build the file if MPSOC.
>
> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
2018-07-30 17:48 ` [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs Stefano Stabellini
2018-07-31 11:17 ` Julien Grall
@ 2018-08-01 7:25 ` Andrii Anisov
2018-08-01 22:43 ` Stefano Stabellini
1 sibling, 1 reply; 21+ messages in thread
From: Andrii Anisov @ 2018-08-01 7:25 UTC (permalink / raw)
To: Stefano Stabellini, julien.grall
Cc: artem_mygaiev, volodymyr_babchuk, xen-devel
Hello Stefano,
On 30.07.18 20:48, Stefano Stabellini wrote:
> Add a "Platform Support" choice with four kconfig options: QEMU, RCAR3,
> MPSOC and ALL_PLAT. They enable the required options for their hardware
> platform. ALL_PLAT enables all available platforms and it's the default.
> It doesn't automatically select any of the related drivers, otherwise
> they cannot be disabled. ALL_PLAT is implemented by using hidden options
> with default values depending on ALL_PLAT.
>
> In the case of the MPSOC that has a platform file under
> arch/arm/platforms/, build the file if MPSOC.
>
> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
--
*Andrii Anisov*
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
2018-08-01 7:25 ` Andrii Anisov
@ 2018-08-01 22:43 ` Stefano Stabellini
0 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-08-01 22:43 UTC (permalink / raw)
To: Andrii Anisov
Cc: artem_mygaiev, julien.grall, Stefano Stabellini,
volodymyr_babchuk, xen-devel
On Wed, 1 Aug 2018, Andrii Anisov wrote:
> Hello Stefano,
>
>
> On 30.07.18 20:48, Stefano Stabellini wrote:
> > Add a "Platform Support" choice with four kconfig options: QEMU, RCAR3,
> > MPSOC and ALL_PLAT. They enable the required options for their hardware
> > platform. ALL_PLAT enables all available platforms and it's the default.
> > It doesn't automatically select any of the related drivers, otherwise
> > they cannot be disabled. ALL_PLAT is implemented by using hidden options
> > with default values depending on ALL_PLAT.
> >
> > In the case of the MPSOC that has a platform file under
> > arch/arm/platforms/, build the file if MPSOC.
> >
> > Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
> Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
Thank you!
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v8 09/11] xen: add per-platform defaults for NR_CPUS
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (7 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 10/11] xen: add cloc target Stefano Stabellini
` (2 subsequent siblings)
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: andrew.cooper3, sstabellini, andrii_anisov, JBeulich, xen-devel
Add specific per-platform defaults for NR_CPUS. Note that the order of
the defaults matter: they need to go first, otherwise the generic
defaults will be applied.
This is done so that Xen builds customized for a specific hardware
platform can have the right NR_CPUS number.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
CC: JBeulich@suse.com
CC: andrew.cooper3@citrix.com
---
Changes in v6:
- remove useless additional default for ALL
---
xen/arch/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/xen/arch/Kconfig b/xen/arch/Kconfig
index cf0acb7..1954d1c 100644
--- a/xen/arch/Kconfig
+++ b/xen/arch/Kconfig
@@ -3,6 +3,9 @@ config NR_CPUS
int "Maximum number of physical CPUs"
range 1 4095
default "256" if X86
+ default "8" if ARM && RCAR3
+ default "4" if ARM && QEMU
+ default "4" if ARM && MPSOC
default "128" if ARM
---help---
Specifies the maximum number of physical CPUs which Xen will support.
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 10/11] xen: add cloc target
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (8 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 09/11] xen: add per-platform defaults for NR_CPUS Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 11/11] xen: specify support for EXPERT and DEBUG Kconfig options Stefano Stabellini
2018-07-31 11:28 ` [PATCH v8 00/11] arm: more kconfig configurability and small default configs Julien Grall
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: andrew.cooper3, sstabellini, andrii_anisov, jbeulich, xen-devel
Add a Xen build target to count the lines of code of the source files
built. Uses `cloc' to do the job.
With Xen on ARM taking off in embedded, IoT, and automotive, we are
seeing more and more uses of Xen in constrained environments. Users and
system integrators want the smallest Xen and Dom0 configurations. Some
of these deployments require certifications, where you definitely want
the smallest lines of code count. I provided this patch to give us the
lines of code count for that purpose.
Use the .o.d files to account for all the built source files. Generate a
list for the `cloc' utility and invoke `cloc'.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
CC: jbeulich@suse.com
CC: andrew.cooper3@citrix.com
---
Changes in v4:
- use grep regex to get multiple source files from .d files
Changes in v3:
- remove build as dependecy for the cloc target
Changes in v2:
- change implementation to use .o.d to find built source files
---
xen/Makefile | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/xen/Makefile b/xen/Makefile
index 62d479c..338d5a3 100644
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -267,3 +267,15 @@ $(KCONFIG_CONFIG):
include/config/auto.conf.cmd: ;
-include $(BASEDIR)/include/config/auto.conf.cmd
+
+.PHONY: cloc
+cloc:
+ $(eval tmpfile := $(shell mktemp))
+ $(foreach f, $(shell find $(BASEDIR) -name *.o.d), \
+ $(eval path := $(dir $(f))) \
+ $(eval names := $(shell grep -o "[a-zA-Z0-9_/-]*\.[cS]" $(f))) \
+ $(foreach sf, $(names), \
+ $(shell if test -f $(path)/$(sf) ; then echo $(path)/$(sf) >> $(tmpfile); fi;)))
+ cloc --list-file=$(tmpfile)
+ rm $(tmpfile)
+
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v8 11/11] xen: specify support for EXPERT and DEBUG Kconfig options
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (9 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 10/11] xen: add cloc target Stefano Stabellini
@ 2018-07-30 17:48 ` Stefano Stabellini
2018-07-31 11:28 ` [PATCH v8 00/11] arm: more kconfig configurability and small default configs Julien Grall
11 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-30 17:48 UTC (permalink / raw)
To: julien.grall
Cc: Tim Deegan, sstabellini, andrii_anisov, George.Dunlap,
andrew.cooper3, Ian.Jackson, xen-devel, jbeulich, Wei Liu
Add a clear statement about them, reflecting the current security
support status of Kconfig options (no changes to current policies).
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
CC: George.Dunlap@eu.citrix.com
CC: Ian.Jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: andrew.cooper3@citrix.com
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Tim Deegan <tim@xen.org>
CC: Wei Liu <wei.liu2@citrix.com>
---
Changes in v7:
- talk about EXPERT and DEBUG rather than CONFIG_EXPERT and CONFIG_DEBUG
---
SUPPORT.md | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/SUPPORT.md b/SUPPORT.md
index 264b23f..e3e49e2 100644
--- a/SUPPORT.md
+++ b/SUPPORT.md
@@ -16,6 +16,12 @@ for the definitions of the support status levels etc.
# Feature Support
+## Kconfig
+
+EXPERT and DEBUG Kconfig options are not security supported. Other
+Kconfig options are supported, if the related features are marked as
+supported in this document.
+
## Host Architecture
### x86-64
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v8 00/11] arm: more kconfig configurability and small default configs
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
` (10 preceding siblings ...)
2018-07-30 17:48 ` [PATCH v8 11/11] xen: specify support for EXPERT and DEBUG Kconfig options Stefano Stabellini
@ 2018-07-31 11:28 ` Julien Grall
2018-07-31 16:10 ` Stefano Stabellini
11 siblings, 1 reply; 21+ messages in thread
From: Julien Grall @ 2018-07-31 11:28 UTC (permalink / raw)
To: Stefano Stabellini
Cc: andrew.cooper3, dfaggioli, andrii_anisov, George.Dunlap,
xen-devel
On 30/07/18 18:48, Stefano Stabellini wrote:
> Hi all,
Hi Stefano,
>
> This patch series is the first step toward building a small certifiable
> Xen hypervisor for ARM boards.
>
> The series makes a few changes to allow disabling more kconfig options:
> most of them already exist but cannot be disabled. It also introduces a
> reference kconfig for Renesas RCar (due to popular demand, candidate for
> certifications), Xilinx MPSoC, and for QEMU aarch64 (not for
> certifications, but useful for debugging).
>
> The last patch clarifies the security support status of kconfig options
> in Xen.
>
> All patches are already acked, except for patch #8: "arm: add ALL_PLAT,
> QEMU, Rcar3 and MPSoC configs".
>
> Cheers,
>
> Stefano
>
>
> The following changes since commit 16fb4b5a9a79f95df17f10ba62e9f44d21cf89b5:
>
> docs/gen-html-index: Make HTML::TreeBuilder::XPath optional again (2018-04-13 17:04:36 +0100)
This is nearly 4 months old... Please resend the series rebased on the
latest staging.
>
> are available in the git repository at:
>
> http://xenbits.xenproject.org/git-http/people/sstabellini/xen-unstable.git small-kconfig-v8
>
> for you to fetch changes up to 0a32269da030bf379a17b5203faa00578de9c919:
>
> xen: specify support for EXPERT and DEBUG Kconfig options (2018-07-30 10:41:41 -0700)
>
> ----------------------------------------------------------------
> Stefano Stabellini (11):
> arm: remove the ARM HDLCD driver
For instance, this patch has been committed a while ago.
> arm: make it possible to disable HAS_GICV3
> arm: rename HAS_GICV3 to GICV3
> Make MEM_ACCESS configurable
> make it possible to enable/disable UART drivers
> arm: make it possible to disable the SMMU driver
> arm: add a tiny kconfig configuration
> arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
> xen: add per-platform defaults for NR_CPUS
> xen: add cloc target
> xen: specify support for EXPERT and DEBUG Kconfig options
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v8 00/11] arm: more kconfig configurability and small default configs
2018-07-31 11:28 ` [PATCH v8 00/11] arm: more kconfig configurability and small default configs Julien Grall
@ 2018-07-31 16:10 ` Stefano Stabellini
2018-08-02 12:07 ` Julien Grall
0 siblings, 1 reply; 21+ messages in thread
From: Stefano Stabellini @ 2018-07-31 16:10 UTC (permalink / raw)
To: Julien Grall
Cc: Stefano Stabellini, andrii_anisov, andrew.cooper3, George.Dunlap,
dfaggioli, xen-devel
On Tue, 31 Jul 2018, Julien Grall wrote:
> On 30/07/18 18:48, Stefano Stabellini wrote:
> > Hi all,
>
> Hi Stefano,
>
> >
> > This patch series is the first step toward building a small certifiable
> > Xen hypervisor for ARM boards.
> >
> > The series makes a few changes to allow disabling more kconfig options:
> > most of them already exist but cannot be disabled. It also introduces a
> > reference kconfig for Renesas RCar (due to popular demand, candidate for
> > certifications), Xilinx MPSoC, and for QEMU aarch64 (not for
> > certifications, but useful for debugging).
> >
> > The last patch clarifies the security support status of kconfig options
> > in Xen.
> >
> > All patches are already acked, except for patch #8: "arm: add ALL_PLAT,
> > QEMU, Rcar3 and MPSoC configs".
> >
> > Cheers,
> >
> > Stefano
> >
> >
> > The following changes since commit 16fb4b5a9a79f95df17f10ba62e9f44d21cf89b5:
> >
> > docs/gen-html-index: Make HTML::TreeBuilder::XPath optional again
> > (2018-04-13 17:04:36 +0100)
>
> This is nearly 4 months old... Please resend the series rebased on the latest
> staging.
This is the rebase on staging, let me know if you would also like me to
send it to the list. This branch is exactly identical to v8 (aside from
the first patch being dropped): I haven't done Jan's small request for
change. Let me know if you prefer that I do.
The following changes since commit 6aaa9fb308171ec58ddf4cf058ad5341f81a65cf:
hvm/altp2m: Clarify the proper way to extend the altp2m interface (2018-07-31 16:14:01 +0100)
are available in the git repository at:
http://xenbits.xenproject.org/git-http/people/sstabellini/xen-unstable.git small-kconfig-v8-2
for you to fetch changes up to ca306f0f0e25a520fa1c4abd225fc9125327423e:
xen: specify support for EXPERT and DEBUG Kconfig options (2018-07-31 08:24:01 -0700)
----------------------------------------------------------------
Stefano Stabellini (10):
arm: make it possible to disable HAS_GICV3
arm: rename HAS_GICV3 to GICV3
Make MEM_ACCESS configurable
make it possible to enable/disable UART drivers
arm: make it possible to disable the SMMU driver
arm: add a tiny kconfig configuration
arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs
xen: add per-platform defaults for NR_CPUS
xen: add cloc target
xen: specify support for EXPERT and DEBUG Kconfig options
SUPPORT.md | 6 +++++
tools/firmware/xen-dir/shim.config | 2 +-
xen/Makefile | 12 +++++++++
xen/arch/Kconfig | 3 +++
xen/arch/arm/Kconfig | 15 ++++++++---
xen/arch/arm/Makefile | 4 +--
xen/arch/arm/configs/tiny64.conf | 38 ++++++++++++++++++++++++++
xen/arch/arm/platforms/Kconfig | 52 ++++++++++++++++++++++++++++++++++++
xen/arch/arm/platforms/Makefile | 2 +-
xen/arch/arm/vgic.c | 2 +-
xen/arch/arm/vgic/vgic.c | 2 +-
xen/arch/x86/Kconfig | 2 +-
xen/common/Kconfig | 10 ++++++-
xen/common/Makefile | 2 +-
xen/common/domctl.c | 2 +-
xen/drivers/char/Kconfig | 15 ++++++-----
xen/drivers/passthrough/Kconfig | 12 +++++++++
xen/drivers/passthrough/arm/Makefile | 2 +-
xen/include/asm-arm/gic.h | 4 +--
xen/include/asm-arm/vgic.h | 4 +--
xen/include/xen/mem_access.h | 4 +--
xen/include/xsm/dummy.h | 2 +-
xen/include/xsm/xsm.h | 4 +--
xen/xsm/dummy.c | 2 +-
xen/xsm/flask/hooks.c | 4 +--
25 files changed, 173 insertions(+), 34 deletions(-)
create mode 100644 xen/arch/arm/configs/tiny64.conf
create mode 100644 xen/arch/arm/platforms/Kconfig
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v8 00/11] arm: more kconfig configurability and small default configs
2018-07-31 16:10 ` Stefano Stabellini
@ 2018-08-02 12:07 ` Julien Grall
2018-08-02 20:25 ` Stefano Stabellini
0 siblings, 1 reply; 21+ messages in thread
From: Julien Grall @ 2018-08-02 12:07 UTC (permalink / raw)
To: Stefano Stabellini
Cc: andrew.cooper3, dfaggioli, andrii_anisov, George.Dunlap,
xen-devel
Hi Stefano,
On 31/07/18 17:10, Stefano Stabellini wrote:
> On Tue, 31 Jul 2018, Julien Grall wrote:
>> On 30/07/18 18:48, Stefano Stabellini wrote:
>>> Hi all,
>>
>> Hi Stefano,
>>
>>>
>>> This patch series is the first step toward building a small certifiable
>>> Xen hypervisor for ARM boards.
>>>
>>> The series makes a few changes to allow disabling more kconfig options:
>>> most of them already exist but cannot be disabled. It also introduces a
>>> reference kconfig for Renesas RCar (due to popular demand, candidate for
>>> certifications), Xilinx MPSoC, and for QEMU aarch64 (not for
>>> certifications, but useful for debugging).
>>>
>>> The last patch clarifies the security support status of kconfig options
>>> in Xen.
>>>
>>> All patches are already acked, except for patch #8: "arm: add ALL_PLAT,
>>> QEMU, Rcar3 and MPSoC configs".
>>>
>>> Cheers,
>>>
>>> Stefano
>>>
>>>
>>> The following changes since commit 16fb4b5a9a79f95df17f10ba62e9f44d21cf89b5:
>>>
>>> docs/gen-html-index: Make HTML::TreeBuilder::XPath optional again
>>> (2018-04-13 17:04:36 +0100)
>>
>> This is nearly 4 months old... Please resend the series rebased on the latest
>> staging.
>
> This is the rebase on staging, let me know if you would also like me to
> send it to the list. This branch is exactly identical to v8 (aside from
> the first patch being dropped): I haven't done Jan's small request for
> change. Let me know if you prefer that I do.
I addressed Jan's small request and committed.
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v8 00/11] arm: more kconfig configurability and small default configs
2018-08-02 12:07 ` Julien Grall
@ 2018-08-02 20:25 ` Stefano Stabellini
0 siblings, 0 replies; 21+ messages in thread
From: Stefano Stabellini @ 2018-08-02 20:25 UTC (permalink / raw)
To: Julien Grall
Cc: Stefano Stabellini, andrii_anisov, andrew.cooper3, George.Dunlap,
dfaggioli, xen-devel
On Thu, 2 Aug 2018, Julien Grall wrote:
> Hi Stefano,
>
> On 31/07/18 17:10, Stefano Stabellini wrote:
> > On Tue, 31 Jul 2018, Julien Grall wrote:
> > > On 30/07/18 18:48, Stefano Stabellini wrote:
> > > > Hi all,
> > >
> > > Hi Stefano,
> > >
> > > >
> > > > This patch series is the first step toward building a small certifiable
> > > > Xen hypervisor for ARM boards.
> > > >
> > > > The series makes a few changes to allow disabling more kconfig options:
> > > > most of them already exist but cannot be disabled. It also introduces a
> > > > reference kconfig for Renesas RCar (due to popular demand, candidate for
> > > > certifications), Xilinx MPSoC, and for QEMU aarch64 (not for
> > > > certifications, but useful for debugging).
> > > >
> > > > The last patch clarifies the security support status of kconfig options
> > > > in Xen.
> > > >
> > > > All patches are already acked, except for patch #8: "arm: add ALL_PLAT,
> > > > QEMU, Rcar3 and MPSoC configs".
> > > >
> > > > Cheers,
> > > >
> > > > Stefano
> > > >
> > > >
> > > > The following changes since commit
> > > > 16fb4b5a9a79f95df17f10ba62e9f44d21cf89b5:
> > > >
> > > > docs/gen-html-index: Make HTML::TreeBuilder::XPath optional again
> > > > (2018-04-13 17:04:36 +0100)
> > >
> > > This is nearly 4 months old... Please resend the series rebased on the
> > > latest
> > > staging.
> >
> > This is the rebase on staging, let me know if you would also like me to
> > send it to the list. This branch is exactly identical to v8 (aside from
> > the first patch being dropped): I haven't done Jan's small request for
> > change. Let me know if you prefer that I do.
>
> I addressed Jan's small request and committed.
Thank you!
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 21+ messages in thread