xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: tim@xen.org, sstabellini@kernel.org, andrii_anisov@epam.com,
	George.Dunlap@eu.citrix.com, andrew.cooper3@citrix.com,
	ian.jackson@eu.citrix.com, xen-devel@lists.xen.org,
	jbeulich@suse.com, wei.liu2@citrix.com, dgdegra@tycho.nsa.gov
Subject: [PATCH v8 04/11] Make MEM_ACCESS configurable
Date: Mon, 30 Jul 2018 10:48:25 -0700	[thread overview]
Message-ID: <1532972912-12439-4-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1807301042060.20701@sstabellini-ThinkPad-X260>

Select MEM_ACCESS_ALWAYS_ON on x86 to mark that MEM_ACCESS is not
configurable on x86. Avoid selecting it on ARM.
Rename HAS_MEM_ACCESS to MEM_ACCESS everywhere. Add a prompt and a
description to MEM_ACCESS in xen/common/Kconfig.

The result is that the user-visible option is MEM_ACCESS, and it is
configurable only on ARM (disabled by default). At the moment the
arch-specific mem_access code remains enabled on ARM, even with
MEM_ACCESS=y.

The purpose is to reduce code size. The option doesn't depend on EXPERT
because it would be nice to ecurity-support configurations without
MEM_ACCESS and a non-expert should be able to disable it.

Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>

CC: dgdegra@tycho.nsa.gov
CC: andrew.cooper3@citrix.com
CC: George.Dunlap@eu.citrix.com
CC: ian.jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: julien.grall@arm.com
CC: konrad.wilk@oracle.com
CC: sstabellini@kernel.org
CC: tim@xen.org
CC: wei.liu2@citrix.com

---
Changes in v5:
- change MEM_ACCESS_ALWAYS_ON to bool
- change default for MEM_ACCESS, default y if MEM_ACCESS_ALWAYS_ON

Changes in v4:
- remove HAS_MEM_ACCESS
- move MEM_ACCESS_ALWAYS_ON to common
- combile default and bool to def_bool

Changes in v3:
- keep HAS_MEM_ACCESS to mark that an arch can do MEM_ACCESS
- introduce MEM_ACCESS_ALWAYS_ON
- the main MEM_ACCESS option is in xen/common/Kconfig

Changes in v2:
- patch added
---
 tools/firmware/xen-dir/shim.config |  2 +-
 xen/arch/arm/Kconfig               |  1 -
 xen/arch/x86/Kconfig               |  2 +-
 xen/common/Kconfig                 | 10 +++++++++-
 xen/common/Makefile                |  2 +-
 xen/common/domctl.c                |  2 +-
 xen/include/xen/mem_access.h       |  4 ++--
 xen/include/xsm/dummy.h            |  2 +-
 xen/include/xsm/xsm.h              |  4 ++--
 xen/xsm/dummy.c                    |  2 +-
 xen/xsm/flask/hooks.c              |  4 ++--
 11 files changed, 21 insertions(+), 14 deletions(-)

diff --git a/tools/firmware/xen-dir/shim.config b/tools/firmware/xen-dir/shim.config
index 4d5630f..21d7075 100644
--- a/tools/firmware/xen-dir/shim.config
+++ b/tools/firmware/xen-dir/shim.config
@@ -29,7 +29,7 @@ CONFIG_COMPAT=y
 CONFIG_CORE_PARKING=y
 CONFIG_HAS_ALTERNATIVE=y
 CONFIG_HAS_EX_TABLE=y
-CONFIG_HAS_MEM_ACCESS=y
+CONFIG_MEM_ACCESS=y
 CONFIG_HAS_MEM_PAGING=y
 CONFIG_HAS_MEM_SHARING=y
 CONFIG_HAS_PDX=y
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 66adce4..2b87111 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -17,7 +17,6 @@ config ARM
 	def_bool y
 	select HAS_ALTERNATIVE
 	select HAS_DEVICE_TREE
-	select HAS_MEM_ACCESS
 	select HAS_PASSTHROUGH
 	select HAS_PDX
 
diff --git a/xen/arch/x86/Kconfig b/xen/arch/x86/Kconfig
index f64fc56..9a85fe9 100644
--- a/xen/arch/x86/Kconfig
+++ b/xen/arch/x86/Kconfig
@@ -15,7 +15,7 @@ config X86
 	select HAS_GDBSX
 	select HAS_IOPORTS
 	select HAS_KEXEC
-	select HAS_MEM_ACCESS
+	select MEM_ACCESS_ALWAYS_ON
 	select HAS_MEM_PAGING
 	select HAS_MEM_SHARING
 	select HAS_NS16550
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index 9043dce..db6bb2d 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -20,9 +20,17 @@ config HAS_DEVICE_TREE
 config HAS_EX_TABLE
 	bool
 
-config HAS_MEM_ACCESS
+config MEM_ACCESS_ALWAYS_ON
 	bool
 
+config MEM_ACCESS
+	def_bool MEM_ACCESS_ALWAYS_ON
+	prompt "Memory Access and VM events" if !MEM_ACCESS_ALWAYS_ON
+	---help---
+
+	  Framework to configure memory access types for guests and receive
+	  related events in userspace.
+
 config HAS_MEM_PAGING
 	bool
 
diff --git a/xen/common/Makefile b/xen/common/Makefile
index 24d4752..6f2b3fc 100644
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -22,7 +22,7 @@ obj-y += lib.o
 obj-$(CONFIG_NEEDS_LIST_SORT) += list_sort.o
 obj-$(CONFIG_LIVEPATCH) += livepatch.o livepatch_elf.o
 obj-y += lzo.o
-obj-$(CONFIG_HAS_MEM_ACCESS) += mem_access.o
+obj-$(CONFIG_MEM_ACCESS) += mem_access.o
 obj-y += memory.o
 obj-y += monitor.o
 obj-y += multicall.o
diff --git a/xen/common/domctl.c b/xen/common/domctl.c
index 9b7bc08..891ad58 100644
--- a/xen/common/domctl.c
+++ b/xen/common/domctl.c
@@ -1085,7 +1085,7 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
         copyback = 1;
         break;
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
     case XEN_DOMCTL_set_access_required:
         if ( unlikely(current->domain == d) ) /* no domain_pause() */
             ret = -EPERM;
diff --git a/xen/include/xen/mem_access.h b/xen/include/xen/mem_access.h
index 5ab34c1..7e95eab 100644
--- a/xen/include/xen/mem_access.h
+++ b/xen/include/xen/mem_access.h
@@ -78,7 +78,7 @@ long p2m_set_mem_access_multi(struct domain *d,
  */
 int p2m_get_mem_access(struct domain *d, gfn_t gfn, xenmem_access_t *access);
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
 int mem_access_memop(unsigned long cmd,
                      XEN_GUEST_HANDLE_PARAM(xen_mem_access_op_t) arg);
 #else
@@ -88,7 +88,7 @@ int mem_access_memop(unsigned long cmd,
 {
     return -ENOSYS;
 }
-#endif /* CONFIG_HAS_MEM_ACCESS */
+#endif /* CONFIG_MEM_ACCESS */
 
 #endif /* _XEN_MEM_ACCESS_H */
 
diff --git a/xen/include/xsm/dummy.h b/xen/include/xsm/dummy.h
index ff6b2db..b0ac1f6 100644
--- a/xen/include/xsm/dummy.h
+++ b/xen/include/xsm/dummy.h
@@ -584,7 +584,7 @@ static XSM_INLINE int xsm_vm_event_control(XSM_DEFAULT_ARG struct domain *d, int
     return xsm_default_action(action, current->domain, d);
 }
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
 static XSM_INLINE int xsm_mem_access(XSM_DEFAULT_ARG struct domain *d)
 {
     XSM_ASSERT_ACTION(XSM_DM_PRIV);
diff --git a/xen/include/xsm/xsm.h b/xen/include/xsm/xsm.h
index f0c6fc7..7636bcb 100644
--- a/xen/include/xsm/xsm.h
+++ b/xen/include/xsm/xsm.h
@@ -143,7 +143,7 @@ struct xsm_operations {
 
     int (*vm_event_control) (struct domain *d, int mode, int op);
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
     int (*mem_access) (struct domain *d);
 #endif
 
@@ -582,7 +582,7 @@ static inline int xsm_vm_event_control (xsm_default_t def, struct domain *d, int
     return xsm_ops->vm_event_control(d, mode, op);
 }
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
 static inline int xsm_mem_access (xsm_default_t def, struct domain *d)
 {
     return xsm_ops->mem_access(d);
diff --git a/xen/xsm/dummy.c b/xen/xsm/dummy.c
index 6e75119..3290d04 100644
--- a/xen/xsm/dummy.c
+++ b/xen/xsm/dummy.c
@@ -127,7 +127,7 @@ void __init xsm_fixup_ops (struct xsm_operations *ops)
 
     set_to_dummy_if_null(ops, vm_event_control);
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
     set_to_dummy_if_null(ops, mem_access);
 #endif
 
diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
index 78bc326..7a3ccfa 100644
--- a/xen/xsm/flask/hooks.c
+++ b/xen/xsm/flask/hooks.c
@@ -1256,7 +1256,7 @@ static int flask_vm_event_control(struct domain *d, int mode, int op)
     return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__VM_EVENT);
 }
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
 static int flask_mem_access(struct domain *d)
 {
     return current_has_perm(d, SECCLASS_DOMAIN2, DOMAIN2__MEM_ACCESS);
@@ -1803,7 +1803,7 @@ static struct xsm_operations flask_ops = {
 
     .vm_event_control = flask_vm_event_control,
 
-#ifdef CONFIG_HAS_MEM_ACCESS
+#ifdef CONFIG_MEM_ACCESS
     .mem_access = flask_mem_access,
 #endif
 
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2018-07-30 17:48 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-30 17:48 [PATCH v8 00/11] arm: more kconfig configurability and small default configs Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 01/11] arm: remove the ARM HDLCD driver Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 02/11] arm: make it possible to disable HAS_GICV3 Stefano Stabellini
2018-07-31  8:04   ` Jan Beulich
2018-07-31 11:07     ` Julien Grall
2018-07-30 17:48 ` [PATCH v8 03/11] arm: rename HAS_GICV3 to GICV3 Stefano Stabellini
2018-07-30 17:48 ` Stefano Stabellini [this message]
2018-07-30 17:48 ` [PATCH v8 05/11] make it possible to enable/disable UART drivers Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 06/11] arm: make it possible to disable the SMMU driver Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 07/11] arm: add a tiny kconfig configuration Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 08/11] arm: add ALL_PLAT, QEMU, Rcar3 and MPSoC configs Stefano Stabellini
2018-07-31 11:17   ` Julien Grall
2018-08-01  7:25   ` Andrii Anisov
2018-08-01 22:43     ` Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 09/11] xen: add per-platform defaults for NR_CPUS Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 10/11] xen: add cloc target Stefano Stabellini
2018-07-30 17:48 ` [PATCH v8 11/11] xen: specify support for EXPERT and DEBUG Kconfig options Stefano Stabellini
2018-07-31 11:28 ` [PATCH v8 00/11] arm: more kconfig configurability and small default configs Julien Grall
2018-07-31 16:10   ` Stefano Stabellini
2018-08-02 12:07     ` Julien Grall
2018-08-02 20:25       ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1532972912-12439-4-git-send-email-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=George.Dunlap@eu.citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=andrii_anisov@epam.com \
    --cc=dgdegra@tycho.nsa.gov \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=julien.grall@arm.com \
    --cc=tim@xen.org \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).