xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: Stefano Stabellini <stefanos@xilinx.com>,
	sstabellini@kernel.org, andrii_anisov@epam.com,
	xen-devel@lists.xen.org
Subject: [PATCH v3 18/25] xen/arm: generate a simple device tree for domUs
Date: Tue, 31 Jul 2018 16:28:01 -0700	[thread overview]
Message-ID: <1533079688-9541-18-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1807311623060.5781@sstabellini-ThinkPad-X260>

Introduce functions to generate a basic domU device tree, similar to the
existing functions in tools/libxl/libxl_arm.c.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
---
Changes in v3:
- remove CONFIG_ACPI for make_chosen_node
- remove make_hypervisor_node until all Xen related functionalities
  (evtchns, grant table, etc.) work correctly

Changes in v2:
- move prepare_dtb rename to previous patch
- use switch for the gic version
- use arm,gic-400 instead of arm,cortex-a15-gic
- add @unit-address in the gic node name
- add comment on DOMU_DTB_SIZE
---
 xen/arch/arm/domain_build.c | 211 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 209 insertions(+), 2 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index dfa74e4..167a56e 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -1057,7 +1057,6 @@ static int __init make_timer_node(const struct domain *d, void *fdt,
     return res;
 }
 
-#ifdef CONFIG_ACPI
 /*
  * This function is used as part of the device tree generation for Dom0
  * on ACPI systems, and DomUs started directly from Xen based on device
@@ -1103,7 +1102,6 @@ static int __init make_chosen_node(const struct kernel_info *kinfo)
 
     return res;
 }
-#endif
 
 static int __init map_irq_to_domain(struct domain *d, unsigned int irq,
                                     bool need_mapping, const char *devname)
@@ -1496,6 +1494,211 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo,
     return res;
 }
 
+static int __init make_gic_domU_node(const struct domain *d, void *fdt, int addrcells, int sizecells)
+{
+    int res = 0;
+    int reg_size = addrcells + sizecells;
+    int nr_cells = reg_size * 2;
+    __be32 reg[nr_cells];
+    __be32 *cells;
+
+    switch ( gic_hw_version() )
+    {
+    case GIC_V3:
+        res = fdt_begin_node(fdt, "interrupt-controller@"__stringify(GUEST_GICV3_GICD_BASE));
+        break;
+    case GIC_V2:
+        res = fdt_begin_node(fdt, "interrupt-controller@"__stringify(GUEST_GICD_BASE));
+        break;
+    default:
+        panic("Unsupported GIC version");
+    }
+
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "#address-cells", 0);
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "#interrupt-cells", 3);
+    if ( res )
+        return res;
+
+    res = fdt_property(fdt, "interrupt-controller", NULL, 0);
+    if ( res )
+        return res;
+
+    switch ( gic_hw_version() )
+    {
+    case GIC_V3:
+    {
+        const uint64_t gicd_base = GUEST_GICV3_GICD_BASE;
+        const uint64_t gicd_size = GUEST_GICV3_GICD_SIZE;
+        const uint64_t gicr0_base = GUEST_GICV3_GICR0_BASE;
+        const uint64_t gicr0_size = GUEST_GICV3_GICR0_SIZE;
+
+        res = fdt_property_string(fdt, "compatible", "arm,gic-v3");
+        if ( res )
+            return res;
+
+        cells = &reg[0];
+        dt_child_set_range(&cells, addrcells, sizecells, gicd_base, gicd_size);
+        dt_child_set_range(&cells, addrcells, sizecells, gicr0_base, gicr0_size);
+        res = fdt_property(fdt, "reg", reg, sizeof(reg));
+        break;
+    }
+    case GIC_V2:
+    {
+        const uint64_t gicd_base = GUEST_GICD_BASE;
+        const uint64_t gicd_size = GUEST_GICD_SIZE;
+        const uint64_t gicc_base = GUEST_GICC_BASE;
+        const uint64_t gicc_size = GUEST_GICC_SIZE;
+
+        res = fdt_property_string(fdt, "compatible", "arm,gic-400");
+        if ( res )
+            return res;
+
+        cells = &reg[0];
+        dt_child_set_range(&cells, addrcells, sizecells, gicd_base, gicd_size);
+        dt_child_set_range(&cells, addrcells, sizecells, gicc_base, gicc_size);
+        break;
+    }
+    default:
+        break;
+    }
+
+    res = fdt_property(fdt, "reg", reg, sizeof(reg));
+    if (res)
+        return res;
+
+    res = fdt_property_cell(fdt, "linux,phandle", GUEST_PHANDLE_GIC);
+    if (res)
+        return res;
+
+    res = fdt_property_cell(fdt, "phandle", GUEST_PHANDLE_GIC);
+    if (res)
+        return res;
+
+    res = fdt_end_node(fdt);
+
+    return res;
+}
+
+static int __init make_timer_domU_node(const struct domain *d, void *fdt)
+{
+    int res;
+    gic_interrupt_t intrs[3];
+
+    res = fdt_begin_node(fdt, "timer");
+    if ( res )
+        return res;
+
+    if (!is_64bit_domain(d))
+    {
+        res = fdt_property_string(fdt, "compatible", "arm,armv7-timer");
+        if ( res )
+            return res;
+    } else {
+        res = fdt_property_string(fdt, "compatible", "arm,armv8-timer");
+        if ( res )
+            return res;
+    }
+
+    set_interrupt_ppi(intrs[0], GUEST_TIMER_PHYS_S_PPI, 0xf, DT_IRQ_TYPE_LEVEL_LOW);
+    set_interrupt_ppi(intrs[1], GUEST_TIMER_PHYS_NS_PPI, 0xf, DT_IRQ_TYPE_LEVEL_LOW);
+    set_interrupt_ppi(intrs[2], GUEST_TIMER_VIRT_PPI, 0xf, DT_IRQ_TYPE_LEVEL_LOW);
+
+    res = fdt_property(fdt, "interrupts", intrs, sizeof (intrs[0]) * 3);
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "interrupt-parent",
+                            GUEST_PHANDLE_GIC);
+    if (res)
+        return res;
+
+    res = fdt_end_node(fdt);
+    return res;
+}
+
+/*
+ * The max size for DT is 2MB. However, the generated DT is small, 4KB
+ * are enough for now, but we might have to increase it in the feature.
+ */
+#define DOMU_DTB_SIZE 4096
+static int __init prepare_dtb_domU(struct domain *d, struct kernel_info *kinfo)
+{
+    int addrcells, sizecells;
+    int ret;
+
+    addrcells = dt_child_n_addr_cells(dt_host);
+    sizecells = dt_child_n_size_cells(dt_host);
+
+    kinfo->fdt = xmalloc_bytes(DOMU_DTB_SIZE);
+    if ( kinfo->fdt == NULL )
+        return -ENOMEM;
+
+    ret = fdt_create(kinfo->fdt, DOMU_DTB_SIZE);
+    if ( ret < 0 )
+        goto err;
+
+    ret = fdt_finish_reservemap(kinfo->fdt);
+    if ( ret < 0 )
+        goto err;
+
+    ret = fdt_begin_node(kinfo->fdt, "/");
+    if ( ret < 0 )
+        goto err;
+
+    ret = fdt_property_cell(kinfo->fdt, "#address-cells", addrcells);
+    if ( ret )
+        goto err;
+
+    ret = fdt_property_cell(kinfo->fdt, "#size-cells", sizecells);
+    if ( ret )
+        goto err;
+
+    ret = make_chosen_node(kinfo);
+    if ( ret )
+        goto err;
+
+    ret = make_psci_node(kinfo->fdt, NULL);
+    if ( ret )
+        goto err;
+
+    ret = make_cpus_node(d, kinfo->fdt, NULL);
+    if ( ret )
+        goto err;
+
+    ret = make_memory_node(d, kinfo->fdt, addrcells, sizecells, kinfo);
+    if ( ret )
+        goto err;
+
+    ret = make_gic_domU_node(d, kinfo->fdt, addrcells, sizecells);
+    if ( ret )
+        goto err;
+
+    ret = make_timer_domU_node(d, kinfo->fdt);
+    if ( ret )
+        goto err;
+
+    ret = fdt_end_node(kinfo->fdt);
+    if ( ret < 0 )
+        goto err;
+
+    ret = fdt_finish(kinfo->fdt);
+    if ( ret < 0 )
+        goto err;
+
+    return 0;
+
+  err:
+    printk("Device tree generation failed (%d).\n", ret);
+    xfree(kinfo->fdt);
+    return -EINVAL;
+}
+
 static int __init prepare_dtb_hwdom(struct domain *d, struct kernel_info *kinfo)
 {
     const p2m_type_t default_p2mt = p2m_mmio_direct_c;
@@ -2366,6 +2569,10 @@ static int __init construct_domU(struct domain *d, struct dt_device_node *node)
 #endif
     allocate_memory(d, &kinfo);
 
+    rc = prepare_dtb_domU(d, &kinfo);
+    if ( rc < 0 )
+        return rc;
+
     return __construct_domain(d, &kinfo);
 }
 
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2018-07-31 23:28 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-31 23:27 [PATCH v3 00/25] dom0less step1: boot multiple domains from device tree Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 01/25] xen: allow console_io hypercalls from certain DomUs Stefano Stabellini
2018-08-17 19:33   ` Daniel De Graaf
2018-07-31 23:27 ` [PATCH v3 02/25] xen/arm: move a few DT related defines to public/device_tree_defs.h Stefano Stabellini
2018-08-01  9:31   ` Julien Grall
2018-08-22 15:25     ` Wei Liu
2018-07-31 23:27 ` [PATCH v3 03/25] xen/arm: extend device tree based multiboot protocol Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 04/25] xen/arm: document dom0less Stefano Stabellini
2018-08-01  9:46   ` Julien Grall
2018-10-03 16:47     ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 05/25] xen/arm: do not pass dt_host to make_memory_node and make_hypervisor_node Stefano Stabellini
2018-08-01  9:50   ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 06/25] xen/arm: move evtchn_allocate call out of make_hypervisor_node Stefano Stabellini
2018-08-01  9:51   ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 07/25] xen/arm: rename acpi_make_chosen_node to make_chosen_node Stefano Stabellini
2018-08-01  9:53   ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 08/25] xen/arm: increase MAX_MODULES Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 09/25] xen/arm: introduce bootcmdlines Stefano Stabellini
2018-08-01 10:51   ` Julien Grall
2018-10-03 23:11     ` Stefano Stabellini
2018-10-04 17:23       ` Julien Grall
2018-10-04 21:08         ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 10/25] xen/arm: don't add duplicate boot modules Stefano Stabellini
2018-08-01 11:06   ` Julien Grall
2018-10-04 21:05     ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 11/25] xen/arm: probe domU kernels and initrds Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 12/25] xen/arm: refactor construct_dom0 Stefano Stabellini
2018-08-13 10:15   ` Julien Grall
2018-08-15 19:27     ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 13/25] xen/arm: introduce create_domUs Stefano Stabellini
2018-08-01  8:48   ` Jan Beulich
2018-08-13 10:23   ` Julien Grall
2018-08-15 19:37     ` Stefano Stabellini
2018-08-13 10:55   ` Julien Grall
2018-08-15 20:04     ` Stefano Stabellini
2018-08-16  9:03       ` Julien Grall
2018-08-16 18:20         ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 14/25] xen/arm: introduce construct_domU Stefano Stabellini
2018-08-13 10:55   ` Julien Grall
2018-08-15 20:21     ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 15/25] xen/arm: rename get_11_allocation_size to get_allocation_size Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 16/25] xen/arm: rename allocate_memory to allocate_memory_11 Stefano Stabellini
2018-08-13 10:57   ` Julien Grall
2018-08-15 20:26     ` Stefano Stabellini
2018-08-16  9:08       ` Julien Grall
2018-08-16 18:27         ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 17/25] xen/arm: introduce allocate_memory Stefano Stabellini
2018-08-01 11:28   ` Julien Grall
2018-10-03 17:46     ` Stefano Stabellini
2018-07-31 23:28 ` Stefano Stabellini [this message]
2018-08-13 11:07   ` [PATCH v3 18/25] xen/arm: generate a simple device tree for domUs Julien Grall
2018-08-15 20:47     ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 19/25] xen/arm: generate vpl011 node on device tree for domU Stefano Stabellini
2018-08-13 11:20   ` Julien Grall
2018-08-15 23:23     ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 20/25] xen/arm: introduce a union in vpl011 Stefano Stabellini
2018-08-13 11:24   ` Julien Grall
2018-08-15 23:36     ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 21/25] xen/arm: refactor vpl011_data_avail Stefano Stabellini
2018-08-13 13:23   ` Julien Grall
2018-07-31 23:28 ` [PATCH v3 22/25] xen/arm: Allow vpl011 to be used by DomU Stefano Stabellini
2018-08-13 13:42   ` Julien Grall
2018-08-15 23:41     ` Stefano Stabellini
2018-08-13 14:10   ` Julien Grall
2018-08-16 19:21     ` Stefano Stabellini
2018-08-22 10:19       ` Julien Grall
2018-10-03 21:21         ` Stefano Stabellini
2018-10-04 17:17           ` Julien Grall
2018-07-31 23:28 ` [PATCH v3 23/25] xen: support console_switching between Dom0 and DomUs on ARM Stefano Stabellini
2018-08-01  9:03   ` Jan Beulich
2018-10-04 21:52     ` Stefano Stabellini
2018-10-05  9:25       ` Julien Grall
2018-10-05  9:48         ` Julien Grall
2018-10-05 18:39           ` Stefano Stabellini
2018-10-05 18:39         ` Stefano Stabellini
2018-08-13 13:58   ` Julien Grall
2018-08-16 21:48     ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 24/25] xen/vpl011: buffer out chars when the backend is xen Stefano Stabellini
2018-08-13 14:21   ` Julien Grall
2018-08-16 19:41     ` Stefano Stabellini
2018-08-22 10:35       ` Julien Grall
2018-10-04 21:29         ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 25/25] xen/arm: split domain_build.c Stefano Stabellini
2018-08-13 14:29   ` Julien Grall
2018-08-16  0:25     ` Stefano Stabellini
2018-08-16  9:20       ` Julien Grall
2018-08-16 18:12         ` Stefano Stabellini
2018-08-22 15:44 ` [PATCH v3 00/25] dom0less step1: boot multiple domains from device tree Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533079688-9541-18-git-send-email-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=andrii_anisov@epam.com \
    --cc=julien.grall@arm.com \
    --cc=stefanos@xilinx.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).