From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: Stefano Stabellini <stefanos@xilinx.com>,
sstabellini@kernel.org, andrii_anisov@epam.com,
xen-devel@lists.xen.org
Subject: [PATCH v3 21/25] xen/arm: refactor vpl011_data_avail
Date: Tue, 31 Jul 2018 16:28:04 -0700 [thread overview]
Message-ID: <1533079688-9541-21-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1807311623060.5781@sstabellini-ThinkPad-X260>
Move the code to calculate in_fifo_level and out_fifo_level out of
vpl011_data_avail, to the caller.
This change will make it possible to reuse vpl011_data_avail with
different ring structures in a later patch.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
---
Changes in v3:
- remove forward declaration of vpl011_data_avail
Changes in v2:
- new patch
---
xen/arch/arm/vpl011.c | 64 +++++++++++++++++++++++++++++----------------------
1 file changed, 36 insertions(+), 28 deletions(-)
diff --git a/xen/arch/arm/vpl011.c b/xen/arch/arm/vpl011.c
index e70c5ec..725a203 100644
--- a/xen/arch/arm/vpl011.c
+++ b/xen/arch/arm/vpl011.c
@@ -378,30 +378,13 @@ static const struct mmio_handler_ops vpl011_mmio_handler = {
.write = vpl011_mmio_write,
};
-static void vpl011_data_avail(struct domain *d)
+static void vpl011_data_avail(struct domain *d,
+ XENCONS_RING_IDX in_fifo_level,
+ XENCONS_RING_IDX in_size,
+ XENCONS_RING_IDX out_fifo_level,
+ XENCONS_RING_IDX out_size)
{
- unsigned long flags;
struct vpl011 *vpl011 = &d->arch.vpl011;
- struct xencons_interface *intf = vpl011->dom.ring_buf;
- XENCONS_RING_IDX in_cons, in_prod, out_cons, out_prod;
- XENCONS_RING_IDX in_fifo_level, out_fifo_level;
-
- VPL011_LOCK(d, flags);
-
- in_cons = intf->in_cons;
- in_prod = intf->in_prod;
- out_cons = intf->out_cons;
- out_prod = intf->out_prod;
-
- smp_rmb();
-
- in_fifo_level = xencons_queued(in_prod,
- in_cons,
- sizeof(intf->in));
-
- out_fifo_level = xencons_queued(out_prod,
- out_cons,
- sizeof(intf->out));
/**** Update the UART RX state ****/
@@ -410,11 +393,11 @@ static void vpl011_data_avail(struct domain *d)
vpl011->uartfr &= ~RXFE;
/* Set the FIFO_FULL bit if the Xen buffer is full. */
- if ( in_fifo_level == sizeof(intf->in) )
+ if ( in_fifo_level == in_size )
vpl011->uartfr |= RXFF;
/* Assert the RX interrupt if the FIFO is more than half way filled. */
- if ( in_fifo_level >= sizeof(intf->in) - SBSA_UART_FIFO_LEVEL )
+ if ( in_fifo_level >= in_size - SBSA_UART_FIFO_LEVEL )
vpl011->uartris |= RXI;
/*
@@ -427,7 +410,7 @@ static void vpl011_data_avail(struct domain *d)
/**** Update the UART TX state ****/
- if ( out_fifo_level != sizeof(intf->out) )
+ if ( out_fifo_level != out_size )
{
vpl011->uartfr &= ~TXFF;
@@ -445,13 +428,38 @@ static void vpl011_data_avail(struct domain *d)
if ( out_fifo_level == 0 )
vpl011->uartfr |= TXFE;
-
- VPL011_UNLOCK(d, flags);
}
static void vpl011_notification(struct vcpu *v, unsigned int port)
{
- vpl011_data_avail(v->domain);
+ unsigned long flags;
+ struct domain *d = v->domain;
+ struct vpl011 *vpl011 = &d->arch.vpl011;
+ struct xencons_interface *intf = vpl011->dom.ring_buf;
+ XENCONS_RING_IDX in_cons, in_prod, out_cons, out_prod;
+ XENCONS_RING_IDX in_fifo_level, out_fifo_level;
+
+ VPL011_LOCK(d, flags);
+
+ in_cons = intf->in_cons;
+ in_prod = intf->in_prod;
+ out_cons = intf->out_cons;
+ out_prod = intf->out_prod;
+
+ smp_rmb();
+
+ in_fifo_level = xencons_queued(in_prod,
+ in_cons,
+ sizeof(intf->in));
+
+ out_fifo_level = xencons_queued(out_prod,
+ out_cons,
+ sizeof(intf->out));
+
+ vpl011_data_avail(v->domain, in_fifo_level, sizeof(intf->in),
+ out_fifo_level, sizeof(intf->out));
+
+ VPL011_UNLOCK(d, flags);
}
int domain_vpl011_init(struct domain *d, struct vpl011_init_info *info)
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-07-31 23:28 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-31 23:27 [PATCH v3 00/25] dom0less step1: boot multiple domains from device tree Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 01/25] xen: allow console_io hypercalls from certain DomUs Stefano Stabellini
2018-08-17 19:33 ` Daniel De Graaf
2018-07-31 23:27 ` [PATCH v3 02/25] xen/arm: move a few DT related defines to public/device_tree_defs.h Stefano Stabellini
2018-08-01 9:31 ` Julien Grall
2018-08-22 15:25 ` Wei Liu
2018-07-31 23:27 ` [PATCH v3 03/25] xen/arm: extend device tree based multiboot protocol Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 04/25] xen/arm: document dom0less Stefano Stabellini
2018-08-01 9:46 ` Julien Grall
2018-10-03 16:47 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 05/25] xen/arm: do not pass dt_host to make_memory_node and make_hypervisor_node Stefano Stabellini
2018-08-01 9:50 ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 06/25] xen/arm: move evtchn_allocate call out of make_hypervisor_node Stefano Stabellini
2018-08-01 9:51 ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 07/25] xen/arm: rename acpi_make_chosen_node to make_chosen_node Stefano Stabellini
2018-08-01 9:53 ` Julien Grall
2018-07-31 23:27 ` [PATCH v3 08/25] xen/arm: increase MAX_MODULES Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 09/25] xen/arm: introduce bootcmdlines Stefano Stabellini
2018-08-01 10:51 ` Julien Grall
2018-10-03 23:11 ` Stefano Stabellini
2018-10-04 17:23 ` Julien Grall
2018-10-04 21:08 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 10/25] xen/arm: don't add duplicate boot modules Stefano Stabellini
2018-08-01 11:06 ` Julien Grall
2018-10-04 21:05 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 11/25] xen/arm: probe domU kernels and initrds Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 12/25] xen/arm: refactor construct_dom0 Stefano Stabellini
2018-08-13 10:15 ` Julien Grall
2018-08-15 19:27 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 13/25] xen/arm: introduce create_domUs Stefano Stabellini
2018-08-01 8:48 ` Jan Beulich
2018-08-13 10:23 ` Julien Grall
2018-08-15 19:37 ` Stefano Stabellini
2018-08-13 10:55 ` Julien Grall
2018-08-15 20:04 ` Stefano Stabellini
2018-08-16 9:03 ` Julien Grall
2018-08-16 18:20 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 14/25] xen/arm: introduce construct_domU Stefano Stabellini
2018-08-13 10:55 ` Julien Grall
2018-08-15 20:21 ` Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 15/25] xen/arm: rename get_11_allocation_size to get_allocation_size Stefano Stabellini
2018-07-31 23:27 ` [PATCH v3 16/25] xen/arm: rename allocate_memory to allocate_memory_11 Stefano Stabellini
2018-08-13 10:57 ` Julien Grall
2018-08-15 20:26 ` Stefano Stabellini
2018-08-16 9:08 ` Julien Grall
2018-08-16 18:27 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 17/25] xen/arm: introduce allocate_memory Stefano Stabellini
2018-08-01 11:28 ` Julien Grall
2018-10-03 17:46 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 18/25] xen/arm: generate a simple device tree for domUs Stefano Stabellini
2018-08-13 11:07 ` Julien Grall
2018-08-15 20:47 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 19/25] xen/arm: generate vpl011 node on device tree for domU Stefano Stabellini
2018-08-13 11:20 ` Julien Grall
2018-08-15 23:23 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 20/25] xen/arm: introduce a union in vpl011 Stefano Stabellini
2018-08-13 11:24 ` Julien Grall
2018-08-15 23:36 ` Stefano Stabellini
2018-07-31 23:28 ` Stefano Stabellini [this message]
2018-08-13 13:23 ` [PATCH v3 21/25] xen/arm: refactor vpl011_data_avail Julien Grall
2018-07-31 23:28 ` [PATCH v3 22/25] xen/arm: Allow vpl011 to be used by DomU Stefano Stabellini
2018-08-13 13:42 ` Julien Grall
2018-08-15 23:41 ` Stefano Stabellini
2018-08-13 14:10 ` Julien Grall
2018-08-16 19:21 ` Stefano Stabellini
2018-08-22 10:19 ` Julien Grall
2018-10-03 21:21 ` Stefano Stabellini
2018-10-04 17:17 ` Julien Grall
2018-07-31 23:28 ` [PATCH v3 23/25] xen: support console_switching between Dom0 and DomUs on ARM Stefano Stabellini
2018-08-01 9:03 ` Jan Beulich
2018-10-04 21:52 ` Stefano Stabellini
2018-10-05 9:25 ` Julien Grall
2018-10-05 9:48 ` Julien Grall
2018-10-05 18:39 ` Stefano Stabellini
2018-10-05 18:39 ` Stefano Stabellini
2018-08-13 13:58 ` Julien Grall
2018-08-16 21:48 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 24/25] xen/vpl011: buffer out chars when the backend is xen Stefano Stabellini
2018-08-13 14:21 ` Julien Grall
2018-08-16 19:41 ` Stefano Stabellini
2018-08-22 10:35 ` Julien Grall
2018-10-04 21:29 ` Stefano Stabellini
2018-07-31 23:28 ` [PATCH v3 25/25] xen/arm: split domain_build.c Stefano Stabellini
2018-08-13 14:29 ` Julien Grall
2018-08-16 0:25 ` Stefano Stabellini
2018-08-16 9:20 ` Julien Grall
2018-08-16 18:12 ` Stefano Stabellini
2018-08-22 15:44 ` [PATCH v3 00/25] dom0less step1: boot multiple domains from device tree Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533079688-9541-21-git-send-email-sstabellini@kernel.org \
--to=sstabellini@kernel.org \
--cc=andrii_anisov@epam.com \
--cc=julien.grall@arm.com \
--cc=stefanos@xilinx.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).