From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: Stefano Stabellini <stefanos@xilinx.com>,
Achin.Gupta@arm.com, sstabellini@kernel.org,
andrii_anisov@epam.com, xen-devel@lists.xen.org
Subject: [PATCH v6 20/26] xen/arm: introduce a union in vpl011
Date: Fri, 2 Nov 2018 16:45:12 -0700 [thread overview]
Message-ID: <1541202318-9840-20-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1811021527250.18518@sstabellini-ThinkPad-X260>
Introduce a union in struct vpl011 to contain the console ring members.
A later patch will add another member of the union for the case where
the backend is in Xen.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Changes in v4:
- name union "backend"
Changes in v3:
- rename ring field to dom
Changes in v2:
- new patch
---
xen/arch/arm/vpl011.c | 22 ++++++++++++----------
xen/include/asm-arm/vpl011.h | 8 ++++++--
2 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/xen/arch/arm/vpl011.c b/xen/arch/arm/vpl011.c
index a281eab..ebc045e 100644
--- a/xen/arch/arm/vpl011.c
+++ b/xen/arch/arm/vpl011.c
@@ -82,7 +82,7 @@ static uint8_t vpl011_read_data(struct domain *d)
unsigned long flags;
uint8_t data = 0;
struct vpl011 *vpl011 = &d->arch.vpl011;
- struct xencons_interface *intf = vpl011->ring_buf;
+ struct xencons_interface *intf = vpl011->backend.dom.ring_buf;
XENCONS_RING_IDX in_cons, in_prod;
VPL011_LOCK(d, flags);
@@ -145,7 +145,7 @@ static uint8_t vpl011_read_data(struct domain *d)
static void vpl011_update_tx_fifo_status(struct vpl011 *vpl011,
unsigned int fifo_level)
{
- struct xencons_interface *intf = vpl011->ring_buf;
+ struct xencons_interface *intf = vpl011->backend.dom.ring_buf;
unsigned int fifo_threshold = sizeof(intf->out) - SBSA_UART_FIFO_LEVEL;
BUILD_BUG_ON(sizeof(intf->out) < SBSA_UART_FIFO_SIZE);
@@ -164,7 +164,7 @@ static void vpl011_write_data(struct domain *d, uint8_t data)
{
unsigned long flags;
struct vpl011 *vpl011 = &d->arch.vpl011;
- struct xencons_interface *intf = vpl011->ring_buf;
+ struct xencons_interface *intf = vpl011->backend.dom.ring_buf;
XENCONS_RING_IDX out_cons, out_prod;
VPL011_LOCK(d, flags);
@@ -382,7 +382,7 @@ static void vpl011_data_avail(struct domain *d)
{
unsigned long flags;
struct vpl011 *vpl011 = &d->arch.vpl011;
- struct xencons_interface *intf = vpl011->ring_buf;
+ struct xencons_interface *intf = vpl011->backend.dom.ring_buf;
XENCONS_RING_IDX in_cons, in_prod, out_cons, out_prod;
XENCONS_RING_IDX in_fifo_level, out_fifo_level;
@@ -459,14 +459,14 @@ int domain_vpl011_init(struct domain *d, struct vpl011_init_info *info)
int rc;
struct vpl011 *vpl011 = &d->arch.vpl011;
- if ( vpl011->ring_buf )
+ if ( vpl011->backend.dom.ring_buf )
return -EINVAL;
/* Map the guest PFN to Xen address space. */
rc = prepare_ring_for_helper(d,
gfn_x(info->gfn),
- &vpl011->ring_page,
- &vpl011->ring_buf);
+ &vpl011->backend.dom.ring_page,
+ &vpl011->backend.dom.ring_buf);
if ( rc < 0 )
goto out;
@@ -495,7 +495,8 @@ out2:
vgic_free_virq(d, GUEST_VPL011_SPI);
out1:
- destroy_ring_for_helper(&vpl011->ring_buf, vpl011->ring_page);
+ destroy_ring_for_helper(&vpl011->backend.dom.ring_buf,
+ vpl011->backend.dom.ring_page);
out:
return rc;
@@ -505,11 +506,12 @@ void domain_vpl011_deinit(struct domain *d)
{
struct vpl011 *vpl011 = &d->arch.vpl011;
- if ( !vpl011->ring_buf )
+ if ( !vpl011->backend.dom.ring_buf )
return;
free_xen_event_channel(d, vpl011->evtchn);
- destroy_ring_for_helper(&vpl011->ring_buf, vpl011->ring_page);
+ destroy_ring_for_helper(&vpl011->backend.dom.ring_buf,
+ vpl011->backend.dom.ring_page);
}
/*
diff --git a/xen/include/asm-arm/vpl011.h b/xen/include/asm-arm/vpl011.h
index db95ff8..42d7a24 100644
--- a/xen/include/asm-arm/vpl011.h
+++ b/xen/include/asm-arm/vpl011.h
@@ -31,8 +31,12 @@
#define SBSA_UART_FIFO_SIZE 32
struct vpl011 {
- void *ring_buf;
- struct page_info *ring_page;
+ union {
+ struct {
+ void *ring_buf;
+ struct page_info *ring_page;
+ } dom;
+ } backend;
uint32_t uartfr; /* Flag register */
uint32_t uartcr; /* Control register */
uint32_t uartimsc; /* Interrupt mask register*/
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-11-02 23:45 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 23:45 [PATCH v6 00/25] dom0less step1: boot multiple domains from device tree Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 01/26] xen: allow console_io hypercalls from certain DomUs Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 02/26] xen/arm: extend device tree based multiboot protocol Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 03/26] xen/arm: document dom0less Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 04/26] xen/arm: increase MAX_MODULES Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 05/26] xen/arm: check for multiboot nodes only under /chosen Stefano Stabellini
2018-11-09 14:01 ` Julien Grall
2018-11-09 21:38 ` Stefano Stabellini
2018-11-09 22:35 ` Julien Grall
2018-11-12 21:13 ` Stefano Stabellini
2018-11-12 21:37 ` Julien Grall
2018-11-02 23:44 ` [PATCH v6 06/26] xen/arm: introduce bootcmdlines Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 07/26] xen/arm: don't add duplicate boot modules, introduce domU flag Stefano Stabellini
2018-11-09 14:06 ` Julien Grall
2018-11-02 23:45 ` [PATCH v6 08/26] xen/arm: probe domU kernels and initrds Stefano Stabellini
2018-11-09 14:09 ` Julien Grall
2018-11-02 23:45 ` [PATCH v6 09/26] xen/arm: add start to struct bootcmdline Stefano Stabellini
2018-11-09 14:10 ` Julien Grall
2018-11-02 23:45 ` [PATCH v6 10/26] xen/arm: rename get_11_allocation_size to get_allocation_size Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 11/26] xen/arm: rename allocate_memory to allocate_memory_11 Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 12/26] xen/arm: introduce allocate_memory Stefano Stabellini
2018-11-09 14:19 ` Julien Grall
2018-11-09 21:33 ` Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 13/26] xen/arm: refactor construct_dom0 Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 14/26] xen/arm: move unregister_init_virtual_region to init_done Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 15/26] xen/arm: introduce create_domUs Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 16/26] xen/arm: implement construct_domU Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 17/26] xen/arm: generate a simple device tree for domUs Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 18/26] xen/arm: make set_interrupt_ppi able to handle non-PPI Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 19/26] xen/arm: generate vpl011 node on device tree for domU Stefano Stabellini
2018-11-02 23:45 ` Stefano Stabellini [this message]
2018-11-02 23:45 ` [PATCH v6 21/26] xen/arm: refactor vpl011_data_avail Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 22/26] xen: support console_switching between Dom0 and DomUs on ARM Stefano Stabellini
2018-11-05 9:15 ` Jan Beulich
2018-11-02 23:45 ` [PATCH v6 23/26] xen/arm: Allow vpl011 to be used by DomU Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 24/26] xen/vpl011: buffer out chars when the backend is xen Stefano Stabellini
2018-11-09 14:32 ` Julien Grall
2018-11-09 21:13 ` Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 25/26] xen/arm: move kernel.h to asm-arm/ Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 26/26] xen/arm: split domain_build.c Stefano Stabellini
2018-11-09 14:35 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541202318-9840-20-git-send-email-sstabellini@kernel.org \
--to=sstabellini@kernel.org \
--cc=Achin.Gupta@arm.com \
--cc=andrii_anisov@epam.com \
--cc=julien.grall@arm.com \
--cc=stefanos@xilinx.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).