xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: julien.grall@arm.com
Cc: Stefano Stabellini <stefanos@xilinx.com>,
	Achin.Gupta@arm.com, sstabellini@kernel.org,
	andrii_anisov@epam.com, xen-devel@lists.xen.org
Subject: [PATCH v6 09/26] xen/arm: add start to struct bootcmdline
Date: Fri,  2 Nov 2018 16:45:01 -0700	[thread overview]
Message-ID: <1541202318-9840-9-git-send-email-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.10.1811021527250.18518@sstabellini-ThinkPad-X260>

Add a new start address field to struct bootcmdline to easily match a
cmdline to the corresponding bootmodule. This is useful for debugging
(not actually needed for functionalities today, but could be.)

Instead of printing the index in the cmdline array, print the start
address of the corresponding bootmodule for each cmdline in
early_print_info.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
---
 xen/arch/arm/bootfdt.c      | 4 ++--
 xen/arch/arm/setup.c        | 3 ++-
 xen/include/asm-arm/setup.h | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/xen/arch/arm/bootfdt.c b/xen/arch/arm/bootfdt.c
index 8d9ba47..4f0712a 100644
--- a/xen/arch/arm/bootfdt.c
+++ b/xen/arch/arm/bootfdt.c
@@ -238,7 +238,7 @@ static void __init process_multiboot_node(const void *fdt, int node,
     if ( !prop )
         return;
     add_boot_cmdline(fdt_get_name(fdt, parent_node, &len), prop->data,
-                     kind, domU);
+                     kind, start, domU);
 }
 
 static void __init process_chosen_node(const void *fdt, int node,
@@ -335,7 +335,7 @@ static void __init early_print_info(void)
     }
     printk("\n");
     for ( i = 0 ; i < cmds->nr_mods; i++ )
-        printk("CMDLINE[%d]:%s %s\n", i,
+        printk("CMDLINE[%"PRIpaddr"]:%s %s\n", cmds->cmdline[i].start,
                cmds->cmdline[i].dt_name,
                &cmds->cmdline[i].cmdline[0]);
     printk("\n");
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index dbba8f3..a819953 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -254,7 +254,7 @@ struct bootmodule * __init boot_module_find_by_kind(bootmodule_kind kind)
 }
 
 void __init add_boot_cmdline(const char *name, const char *cmdline,
-                             bootmodule_kind kind, bool domU)
+                             bootmodule_kind kind, paddr_t start, bool domU)
 {
     struct bootcmdlines *cmds = &bootinfo.cmdlines;
     struct bootcmdline *cmd;
@@ -268,6 +268,7 @@ void __init add_boot_cmdline(const char *name, const char *cmdline,
     cmd = &cmds->cmdline[cmds->nr_mods++];
     cmd->kind = kind;
     cmd->domU = domU;
+    cmd->start = start;
 
     ASSERT(strlen(name) <= DT_MAX_NAME);
     safe_strcpy(cmd->dt_name, name);
diff --git a/xen/include/asm-arm/setup.h b/xen/include/asm-arm/setup.h
index 33fb04e..0d787e6 100644
--- a/xen/include/asm-arm/setup.h
+++ b/xen/include/asm-arm/setup.h
@@ -49,6 +49,7 @@ struct bootmodule {
 struct bootcmdline {
     bootmodule_kind kind;
     bool domU;
+    paddr_t start;
     char dt_name[DT_MAX_NAME];
     char cmdline[BOOTMOD_MAX_CMDLINE];
 };
@@ -104,7 +105,7 @@ struct bootmodule *boot_module_find_by_kind(bootmodule_kind kind);
 struct bootmodule * __init boot_module_find_by_addr_and_kind(bootmodule_kind kind,
                                                              paddr_t start);
 void add_boot_cmdline(const char *name, const char *cmdline,
-                      bootmodule_kind kind, bool domU);
+                      bootmodule_kind kind, paddr_t start, bool domU);
 struct bootcmdline *boot_cmdline_find_by_kind(bootmodule_kind kind);
 struct bootcmdline * __init boot_cmdline_find_by_name(const char *name);
 const char * __init boot_module_kind_as_string(bootmodule_kind kind);
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2018-11-02 23:45 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-02 23:45 [PATCH v6 00/25] dom0less step1: boot multiple domains from device tree Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 01/26] xen: allow console_io hypercalls from certain DomUs Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 02/26] xen/arm: extend device tree based multiboot protocol Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 03/26] xen/arm: document dom0less Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 04/26] xen/arm: increase MAX_MODULES Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 05/26] xen/arm: check for multiboot nodes only under /chosen Stefano Stabellini
2018-11-09 14:01   ` Julien Grall
2018-11-09 21:38     ` Stefano Stabellini
2018-11-09 22:35       ` Julien Grall
2018-11-12 21:13         ` Stefano Stabellini
2018-11-12 21:37           ` Julien Grall
2018-11-02 23:44 ` [PATCH v6 06/26] xen/arm: introduce bootcmdlines Stefano Stabellini
2018-11-02 23:44 ` [PATCH v6 07/26] xen/arm: don't add duplicate boot modules, introduce domU flag Stefano Stabellini
2018-11-09 14:06   ` Julien Grall
2018-11-02 23:45 ` [PATCH v6 08/26] xen/arm: probe domU kernels and initrds Stefano Stabellini
2018-11-09 14:09   ` Julien Grall
2018-11-02 23:45 ` Stefano Stabellini [this message]
2018-11-09 14:10   ` [PATCH v6 09/26] xen/arm: add start to struct bootcmdline Julien Grall
2018-11-02 23:45 ` [PATCH v6 10/26] xen/arm: rename get_11_allocation_size to get_allocation_size Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 11/26] xen/arm: rename allocate_memory to allocate_memory_11 Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 12/26] xen/arm: introduce allocate_memory Stefano Stabellini
2018-11-09 14:19   ` Julien Grall
2018-11-09 21:33     ` Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 13/26] xen/arm: refactor construct_dom0 Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 14/26] xen/arm: move unregister_init_virtual_region to init_done Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 15/26] xen/arm: introduce create_domUs Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 16/26] xen/arm: implement construct_domU Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 17/26] xen/arm: generate a simple device tree for domUs Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 18/26] xen/arm: make set_interrupt_ppi able to handle non-PPI Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 19/26] xen/arm: generate vpl011 node on device tree for domU Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 20/26] xen/arm: introduce a union in vpl011 Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 21/26] xen/arm: refactor vpl011_data_avail Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 22/26] xen: support console_switching between Dom0 and DomUs on ARM Stefano Stabellini
2018-11-05  9:15   ` Jan Beulich
2018-11-02 23:45 ` [PATCH v6 23/26] xen/arm: Allow vpl011 to be used by DomU Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 24/26] xen/vpl011: buffer out chars when the backend is xen Stefano Stabellini
2018-11-09 14:32   ` Julien Grall
2018-11-09 21:13     ` Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 25/26] xen/arm: move kernel.h to asm-arm/ Stefano Stabellini
2018-11-02 23:45 ` [PATCH v6 26/26] xen/arm: split domain_build.c Stefano Stabellini
2018-11-09 14:35   ` Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1541202318-9840-9-git-send-email-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=Achin.Gupta@arm.com \
    --cc=andrii_anisov@epam.com \
    --cc=julien.grall@arm.com \
    --cc=stefanos@xilinx.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).