xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Amit Singh Tomar <amittomer25@gmail.com>
To: xen-devel@lists.xenproject.org
Cc: andre.przywara@arm.com, julien.grall@arm.com,
	sstabellini@kernel.org, Amit Singh Tomar <amittomer25@gmail.com>
Subject: [PATCH v2 1/3] xen/arm: Add Amlogic Meson SoCs earlyprintk support
Date: Thu, 21 Mar 2019 15:55:33 +0530	[thread overview]
Message-ID: <1553163935-12862-1-git-send-email-amittomer25@gmail.com> (raw)

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
TODO:
        * Capture XEN boot info on WIKI.

Changes since v1:

        * Fixed coding style issue.
        * Undone changes in early-printk.txt.

Changes since RFC:

        * Replaced LDRH with LDR, with this there
          is no scattered output on console now.
        * Used tbnz instead of tst and b.ne.
        * Used AML_ prefix against register names.
---
 xen/arch/arm/arm64/debug-meson.inc | 51 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 xen/arch/arm/arm64/debug-meson.inc

diff --git a/xen/arch/arm/arm64/debug-meson.inc b/xen/arch/arm/arm64/debug-meson.inc
new file mode 100644
index 0000000..01b70f0
--- /dev/null
+++ b/xen/arch/arm/arm64/debug-meson.inc
@@ -0,0 +1,51 @@
+/*
+ * xen/arch/arm/arm64/debug-meson.inc
+ *
+ * MESON specific debug code.
+ *
+ * Copyright (c) 2019, Amit Singh Tomar <amittomer25@gmail.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms and conditions of the GNU General Public
+ * License, version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define AML_UART_WFIFO_REG      0x00
+#define AML_UART_STATUS_REG     0x0c
+
+#define AML_UART_TX_FIFO_FULL   21
+
+/*
+ * MESON UART wait UART to be ready to transmit
+ * xb: register which contains the UART base address
+ * c: scratch register
+ */
+.macro early_uart_ready xb c
+1:
+        ldr     w\c, [\xb, #AML_UART_STATUS_REG]        /* status register */
+        tbnz    w\c, #AML_UART_TX_FIFO_FULL, 1b         /* Check TXFIFO FULL bit */
+.endm
+
+/*
+ * MESON UART transmit character
+ * xb: register which contains the UART base address
+ * wt: register which contains the character to transmit
+ */
+.macro early_uart_transmit xb wt
+        str    \wt, [\xb, #AML_UART_WFIFO_REG]
+.endm
+
+/*
+ * Local variables:
+ * mode: ASM
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

             reply	other threads:[~2019-03-21 10:25 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-21 10:25 Amit Singh Tomar [this message]
2019-03-21 10:25 ` [PATCH v2 2/3] xen/arm: Add MESON UART driver for Amlogic Meson SoCs Amit Singh Tomar
2019-04-02 20:01   ` André Przywara
2019-04-09  9:39     ` Julien Grall
2019-04-09  9:39       ` [Xen-devel] " Julien Grall
2019-04-09 10:09       ` Amit Tomer
2019-04-09 10:09         ` [Xen-devel] " Amit Tomer
2019-04-09 10:14         ` Julien Grall
2019-04-09 10:14           ` [Xen-devel] " Julien Grall
2019-03-21 10:25 ` [PATCH v2 3/3] MAINTAINERS: add ARM meson serial driver Amit Singh Tomar
2019-04-02 20:01   ` André Przywara
2019-04-02 10:05 ` [PATCH v2 1/3] xen/arm: Add Amlogic Meson SoCs earlyprintk support Julien Grall
2019-04-02 20:00 ` André Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553163935-12862-1-git-send-email-amittomer25@gmail.com \
    --to=amittomer25@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=julien.grall@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).