From: Christoph Egger <Christoph.Egger@amd.com>
To: xen-devel@lists.xensource.com
Cc: Tim Deegan <Tim.Deegan@citrix.com>
Subject: Re: xen: use paging_mode_hap()
Date: Wed, 31 Mar 2010 13:48:41 +0100 [thread overview]
Message-ID: <201003311448.41904.Christoph.Egger@amd.com> (raw)
In-Reply-To: <20100331092932.GB4975@whitby.uk.xensource.com>
[-- Attachment #1: Type: text/plain, Size: 1370 bytes --]
On Wednesday 31 March 2010 11:29:32 Tim Deegan wrote:
> At 16:51 +0100 on 30 Mar (1269967863), Christoph Egger wrote:
> > Hi!
> >
> > Attached patch makes xen consequently use paging_mode_hap().
> >
> > Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
> >
> > P.S.: This is a resend. Needs ack from Tim.
>
> Nack, at least in its current form - paging_mode_hap(d) is not the same
> as d->arch.hvm_domain.hap_enabled. Especially in paging.c, where we
> test hap_enabled to gate whether we should call the function that makes
> paging_mode_hap(d) true!
>
> I think the p2m.c changes are wrong too, since the p2m init code is
> called from hap_enable before it writes PG_HAP_enable to the paging
> mode. (That's probably a bug in its own right; it should set the mode
> and then call the p2m code, and shadow should do likewise, and then
> these changes would be correct and desirable).
>
> The other substitutions are probably OK.
>
> Cheers,
>
> Tim.
Thanks for you comments. Attached is my updated patch.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
--
---to satisfy European Law for business letters:
Advanced Micro Devices GmbH
Karl-Hammerschmidt-Str. 34, 85609 Dornach b. Muenchen
Geschaeftsfuehrer: Andrew Bowd, Thomas M. McCoy, Giuliano Meroni
Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
[-- Attachment #2: xen_pagingmode.diff --]
[-- Type: text/x-diff, Size: 3708 bytes --]
diff -r fa1ad484bf0b xen/arch/x86/hvm/vmx/vmx.c
--- a/xen/arch/x86/hvm/vmx/vmx.c Wed Mar 31 14:28:31 2010 +0200
+++ b/xen/arch/x86/hvm/vmx/vmx.c Wed Mar 31 14:44:39 2010 +0200
@@ -92,7 +92,7 @@ static int vmx_domain_initialise(struct
static void vmx_domain_destroy(struct domain *d)
{
- if ( d->arch.hvm_domain.hap_enabled )
+ if ( paging_mode_hap(d) )
on_each_cpu(__ept_sync_domain, d, 1);
vmx_free_vlapic_mapping(d);
}
@@ -678,7 +678,7 @@ static void vmx_ctxt_switch_to(struct vc
if ( old_cr4 != new_cr4 )
write_cr4(new_cr4);
- if ( d->arch.hvm_domain.hap_enabled )
+ if ( paging_mode_hap(d) )
{
unsigned int cpu = smp_processor_id();
/* Test-and-test-and-set this CPU in the EPT-is-synced mask. */
@@ -1222,7 +1222,7 @@ static void __ept_sync_domain(void *info
void ept_sync_domain(struct domain *d)
{
/* Only if using EPT and this domain has some VCPUs to dirty. */
- if ( !d->arch.hvm_domain.hap_enabled || !d->vcpu || !d->vcpu[0] )
+ if ( !paging_mode_hap(d) || !d->vcpu || !d->vcpu[0] )
return;
ASSERT(local_irq_is_enabled());
diff -r fa1ad484bf0b xen/arch/x86/mm/hap/hap.c
--- a/xen/arch/x86/mm/hap/hap.c Wed Mar 31 14:28:31 2010 +0200
+++ b/xen/arch/x86/mm/hap/hap.c Wed Mar 31 14:44:39 2010 +0200
@@ -550,8 +550,13 @@ int hap_enable(struct domain *d, u32 mod
{
unsigned int old_pages;
int rv = 0;
+ uint32_t oldmode;
domain_pause(d);
+
+ oldmode = d->arch.paging.mode;
+ d->arch.paging.mode = mode | PG_HAP_enable;
+
/* error check */
if ( (d == current->domain) )
{
@@ -582,9 +587,9 @@ int hap_enable(struct domain *d, u32 mod
goto out;
}
- d->arch.paging.mode = mode | PG_HAP_enable;
-
out:
+ if (rv)
+ d->arch.paging.mode = oldmode;
domain_unpause(d);
return rv;
}
diff -r fa1ad484bf0b xen/arch/x86/mm/mem_sharing.c
--- a/xen/arch/x86/mm/mem_sharing.c Wed Mar 31 14:28:31 2010 +0200
+++ b/xen/arch/x86/mm/mem_sharing.c Wed Mar 31 14:44:39 2010 +0200
@@ -44,7 +44,7 @@ static void mem_sharing_audit(void);
#define hap_enabled(d) \
- (is_hvm_domain(d) && (d)->arch.hvm_domain.hap_enabled)
+ (is_hvm_domain(d) && paging_mode_hap(d))
#define mem_sharing_enabled(d) \
(is_hvm_domain(d) && (d)->arch.hvm_domain.mem_sharing_enabled)
diff -r fa1ad484bf0b xen/arch/x86/mm/p2m.c
--- a/xen/arch/x86/mm/p2m.c Wed Mar 31 14:28:31 2010 +0200
+++ b/xen/arch/x86/mm/p2m.c Wed Mar 31 14:44:39 2010 +0200
@@ -1231,7 +1231,7 @@ p2m_set_entry(struct domain *d, unsigned
if ( !p2m_next_level(d, &table_mfn, &table, &gfn_remainder, gfn,
L3_PAGETABLE_SHIFT - PAGE_SHIFT,
((CONFIG_PAGING_LEVELS == 3)
- ? (d->arch.hvm_domain.hap_enabled ? 4 : 8)
+ ? (paging_mode_hap(d) ? 4 : 8)
: L3_PAGETABLE_ENTRIES),
PGT_l2_page_table) )
goto out;
@@ -1568,7 +1568,7 @@ int p2m_init(struct domain *d)
p2m->get_entry_current = p2m_gfn_to_mfn_current;
p2m->change_entry_type_global = p2m_change_type_global;
- if ( is_hvm_domain(d) && d->arch.hvm_domain.hap_enabled &&
+ if ( is_hvm_domain(d) && paging_mode_hap(d) &&
(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) )
ept_p2m_init(d);
@@ -1595,7 +1595,7 @@ int set_p2m_entry(struct domain *d, unsi
while ( todo )
{
- if ( is_hvm_domain(d) && d->arch.hvm_domain.hap_enabled )
+ if ( is_hvm_domain(d) && paging_mode_hap(d) )
order = (((gfn | mfn_x(mfn) | todo) & (SUPERPAGE_PAGES - 1)) == 0) ?
9 : 0;
else
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2010-03-31 12:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-30 15:51 xen: use paging_mode_hap() Christoph Egger
2010-03-31 9:29 ` Tim Deegan
2010-03-31 12:48 ` Christoph Egger [this message]
2010-04-01 10:27 ` Tim Deegan
2010-04-07 7:53 ` Xu, Dongxiao
2010-04-07 9:01 ` Tim Deegan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201003311448.41904.Christoph.Egger@amd.com \
--to=christoph.egger@amd.com \
--cc=Tim.Deegan@citrix.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).