* Re: [Pkg-xen-devel] Problems with PCI pass-through [not found] ` <20100529123246.GT17817@reaktio.net> @ 2010-06-04 22:42 ` Thomas Schwinge 2010-06-07 15:13 ` Konrad Rzeszutek Wilk 2010-06-09 14:55 ` Pasi Kärkkäinen 0 siblings, 2 replies; 5+ messages in thread From: Thomas Schwinge @ 2010-06-04 22:42 UTC (permalink / raw) To: Pasi Kärkkäinen, xen-devel; +Cc: Bastian Blank, pkg-xen-devel [-- Attachment #1.1: Type: text/plain, Size: 66641 bytes --] Hello! As I'm writing in <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> I'm having problems with PCI pass-through. It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian packages). Also I tested two different kernels (both .32 ones). Some more details: On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > I'm having problems getting PCI pass-through to work. > > > > This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64 > > 4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12. > > Can you try grabbing a kernel from Jeremy's xen.git xen/stable-2.6.32.x branch > and compiling it.. ? I'll do that in case that the following doesn't yield an answer: > Just yesterday there was an user on ##xen telling it worked OK for him. > Other than that.. dunno really. > > What's the Xen PCI backend mode on dom0 kernel .config? It's the same for the dom0 and domU: $ < /boot/config-2.6.32-5-xen-amd64 grep -i xen | grep -i pci CONFIG_XEN_DOM0_PCI=y # CONFIG_XEN_PCI_PASSTHROUGH is not set CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_XEN_PCIDEV_BACKEND=y CONFIG_XEN_PCIDEV_BACKEND_VPCI=y # CONFIG_XEN_PCIDEV_BACKEND_PASS is not set # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set # CONFIG_XEN_PCIDEV_BE_DEBUG is not set # CONFIG_XEN_PLATFORM_PCI is not set That seems correct to me. Right? Here's how I boot the dom0: multiboot /boot/xen-4.0-amd64.gz noreboot com1=38400,8n1 vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring module /boot/vmlinuz-2.6.32-5-xen-amd64 /boot/vmlinuz-2.6.32-5-xen-amd64 xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug module /boot/initrd.img-2.6.32-5-xen-amd64 /boot/initrd.img-2.6.32-5-xen-amd64 domU: kernel = '/boot/vmlinuz-2.6.32-5-xen-686' ramdisk = '/boot/initrd.img-2.6.32-5-xen-686' memory = 456 name = 'kepler' root = '/dev/xvda ro' vif = [ 'mac=00:16:3e:23:85:35, bridge=br0' ] disk = [ 'phy:vg1/kepler-root,xvda,w', 'phy:vg1/kepler-swap,xvdb,w', 'phy:vg1/kepler-data,xvdc,w'] extra = 'iommu=soft swiotlb=force' pci = [ '0000:00:02.7' ] Boot log for the dom0: (XEN) Xen version 4.0.0 (Debian 4.0.0-1~experimental.2) (waldi@debian.org) (gcc version 4.4.4 (Debian 4.4.4-3) ) Fri May 28 11:28:13 UTC 2010 (XEN) Command line: com1=38400,8n1 vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009dc00 (usable) (XEN) 000000000009dc00 - 00000000000a0000 (reserved) (XEN) 00000000000d6000 - 00000000000d8000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000009dee0000 (usable) (XEN) 000000009dee0000 - 000000009deef000 (ACPI data) (XEN) 000000009deef000 - 000000009df00000 (ACPI NVS) (XEN) 000000009df00000 - 00000000a0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) System RAM: 2480MB (2539720kB) (XEN) ACPI: RSDP 000F7350, 0024 (r2 PTLTD ) (XEN) ACPI: XSDT 9DEEB7E4, 004C (r1 PTLTD XSDT 50000 LTP 0) (XEN) ACPI: FACP 9DEEB8A4, 00F4 (r3 FSC ÷Pè0\x11 50000 F4240) (XEN) ACPI: DSDT 9DEEB998, 34FB (r1 FSC D2030 50000 MSFT 2000002) (XEN) ACPI: FACS 9DEEFFC0, 0040 (XEN) ACPI: SSDT 9DEEEE93, 00B5 (r1 PTLTD POWERNOW 50000 LTP 1) (XEN) ACPI: APIC 9DEEEF48, 0050 (r1 PTLTD APIC 50000 LTP 0) (XEN) ACPI: MCFG 9DEEEF98, 0040 (r1 PTLTD MCFG 50000 LTP 0) (XEN) ACPI: BOOT 9DEEEFD8, 0028 (r1 PTLTD $SBFTBL$ 50000 LTP 1) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000009dee0000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f73b0 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f004,0], pm1x_evt[f000,0] (XEN) ACPI: wakeup_vec[9deeffcc], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:15 APIC version 16 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 (XEN) PCI: Not using MMCONFIG. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1800.096 MHz processor. (XEN) Initing memory sharing. (XEN) CPU0: AMD Flush Filter disabled (XEN) AMD K8 machine check reporting enabled (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 (XEN) Platform timer is 3.579MHz ACPI PM Timer ÿ(XEN) Brought up 1 CPUs (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16c1000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000094000000->0000000098000000 (589068 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff816c1000 (XEN) Init. ramdisk: ffffffff816c1000->ffffffff833ea200 (XEN) Phys-Mach map: ffffffff833eb000->ffffffff83889860 (XEN) Start info: ffffffff8388a000->ffffffff8388a4b4 (XEN) Page tables: ffffffff8388b000->ffffffff838ac000 (XEN) Boot stack: ffffffff838ac000->ffffffff838ad000 (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 (XEN) ENTRY ADDRESS: ffffffff81501200 (XEN) Dom0 has maximum 1 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is keeping VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 164kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 06:38:33 UTC 2010 [ 0.000000] Command line: xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000093d0c000 (usable) [ 0.000000] Xen: 000000009dee0000 - 000000009deef000 (ACPI data) [ 0.000000] Xen: 000000009deef000 - 000000009df00000 (ACPI NVS) [ 0.000000] Xen: 000000009df00000 - 00000000a0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x93d0c max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000093d0c000 [ 0.000000] 0000000000 - 0093d0c000 page 4k [ 0.000000] kernel direct mapping tables up to 93d0c000 @ 100000-5a3000 [ 0.000000] RAMDISK: 016c1000 - 033ea200 [ 0.000000] ACPI: RSDP 00000000000f7350 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000009deeb7e4 0004C (v01 PTLTD ? XSDT 00050000 LTP 00000000) [ 0.000000] ACPI: FACP 000000009deeb8a4 000F4 (v03 FSC ÷Pè0? 00050000 000F4240) [ 0.000000] ACPI: DSDT 000000009deeb998 034FB (v01 FSC D2030 00050000 MSFT 02000002) [ 0.000000] ACPI: FACS 000000009deeffc0 00040 [ 0.000000] ACPI: SSDT 000000009deeee93 000B5 (v01 PTLTD POWERNOW 00050000 LTP 00000001) [ 0.000000] ACPI: APIC 000000009deeef48 00050 (v01 PTLTD ? APIC 00050000 LTP 00000000) [ 0.000000] ACPI: MCFG 000000009deeef98 00040 (v01 PTLTD MCFG 00050000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000009deeefd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000093d0c000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000093d0c000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000002a7a7] pages 13 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0093d0c000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000388b000 - 00038ac000] XEN PAGETABLES ==> [000388b000 - 00038ac000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00016a0594] TEXT DATA BSS ==> [0001000000 - 00016a0594] [ 0.000000] #4 [00016c1000 - 00033ea200] RAMDISK ==> [00016c1000 - 00033ea200] [ 0.000000] #5 [00033eb000 - 000388b000] XEN START INFO ==> [00033eb000 - 000388b000] [ 0.000000] #6 [00016a1000 - 00016a11c4] BRK ==> [00016a1000 - 00016a11c4] [ 0.000000] #7 [0000100000 - 000057f000] PGTABLE ==> [0000100000 - 000057f000] [ 0.000000] found SMP MP-table at [ffff8800000f73b0] f73b0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00093d0c [ 0.000000] On node 0 totalpages: 605337 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1154 pages reserved [ 0.000000] DMA zone: 2771 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8222 pages used for memmap [ 0.000000] DMA32 zone: 593134 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800038e2000 s90008 r8192 d20584 u118784 [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] trying to map vcpu_info 0 at ffff8800038ed020, mfn 978ed, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff8800038ed020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 595905 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880005e00000 - ffff880009e00000 [ 0.000000] DMA: software IO TLB at phys 0x5e00000 - 0x9e00000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880005e00000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880009e60000 size=32768 [ 0.000000] Memory: 2274720k/2421808k available (3131k kernel code, 460k absent, 146628k reserved, 1899k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 511 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 1800.096 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.19 BogoMIPS (lpj=7200384) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007156] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008971] Mount-cache hash table entries: 256 [ 0.009697] Initializing cgroup subsys ns [ 0.010197] Initializing cgroup subsys cpuacct [ 0.010697] Initializing cgroup subsys devices [ 0.011198] Initializing cgroup subsys freezer [ 0.011695] Initializing cgroup subsys net_cls [ 0.012066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.013057] CPU: L2 Cache: 128K (64 bytes/line) [ 0.013554] CPU 0/0x0 -> Node 0 [ 0.014050] tseg: 009df00000 [ 0.014547] mce: CPU supports 5 MCE banks (XEN) MCE: MSR 417 is not MCA MSR (XEN) traps.c:2870: GPF (0000): ffff82c480174806 -> ffff82c4801f6a9d [ 0.016010] Performance Events: AMD PMU driver. [ 0.016535] ------------[ cut here ]------------ [ 0.017038] WARNING: at /build/buildd-linux-2.6_2.6.32-15-amd64-PisqNL/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:731 init_hw_perf_events+0x32d/0x3cd() [ 0.018524] Hardware name: D2264-A1 [ 0.019018] Modules linked in: [ 0.019516] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 [ 0.020000] Call Trace: [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd [ 0.020000] [<ffffffff8104fc58>] ? warn_slowpath_common+0x77/0xa3 [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd [ 0.020000] [<ffffffff813034ec>] ? identify_cpu+0x2ff/0x308 [ 0.020000] [<ffffffff8100ee0f>] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.020000] [<ffffffff810e86c1>] ? kmem_cache_alloc+0x8c/0xf0 [ 0.020000] [<ffffffff81508732>] ? identify_boot_cpu+0x15/0x3e [ 0.020000] [<ffffffff815087b9>] ? check_bugs+0x9/0x2e [ 0.020000] [<ffffffff81501cc2>] ? start_kernel+0x3cd/0x3e8 [ 0.020000] [<ffffffff81503c38>] ? xen_start_kernel+0x649/0x64f [ 0.020000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.020000] ... version: 0 [ 0.020000] ... bit width: 48 [ 0.020000] ... generic registers: 4 [ 0.020000] ... value mask: 0000ffffffffffff [ 0.020000] ... max period: 00007fffffffffff [ 0.020000] ... fixed-purpose events: 0 [ 0.020000] ... event mask: 000000000000000f [ 0.020000] SMP alternatives: switching to UP code [ 0.020000] Freeing SMP alternatives: 28k freed [ 0.020000] ACPI: Core revision 20090903 [ 0.027227] alloc irq_desc for 510 on node 0 [ 0.027730] alloc kstat_irqs on node 0 [ 0.028019] alloc irq_desc for 509 on node 0 [ 0.028515] alloc kstat_irqs on node 0 [ 0.029016] alloc irq_desc for 508 on node 0 [ 0.029538] alloc kstat_irqs on node 0 [ 0.030040] alloc irq_desc for 507 on node 0 [ 0.030536] alloc kstat_irqs on node 0 [ 0.031198] Brought up 1 CPUs [ 0.031727] CPU0 attaching NULL sched-domain. [ 0.032177] devtmpfs: initialized [ 0.037032] Grant table initialized [ 0.037558] regulator: core version 0.5 [ 0.038139] NET: Registered protocol family 16 [ 0.038730] alloc irq_desc for 506 on node 0 [ 0.039228] alloc kstat_irqs on node 0 [ 0.039933] node 0 link 0: io port [0, fffff] [ 0.040018] TOM: 00000000a0000000 aka 2560M [ 0.040517] node 0 link 0: mmio [e0000000, efffffff] [ 0.041049] node 0 link 0: mmio [a0000, bffff] [ 0.041549] node 0 link 0: mmio [a0000000, fe0bffff] [ 0.042049] bus: [00,ff] on node 0 link 0 [ 0.042545] bus: 00 index 0 io port: [0, ffff] [ 0.043041] bus: 00 index 1 mmio: [a0000000, fcffffffff] [ 0.043539] bus: 00 index 2 mmio: [a0000, bffff] [ 0.044001] ACPI: bus type pci registered [ 0.044106] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 [ 0.044632] PCI: Not using MMCONFIG. [ 0.045128] PCI: Using configuration type 1 for base access [ 0.046525] bio: create slab <bio-0> at 0 [ 0.048274] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.048844] ACPI: EC: Look up EC in DSDT [ 0.054875] ACPI: Interpreter enabled [ 0.055380] ACPI: (supports S0 S1 S3 S4 S5) [ 0.055919] ACPI: Using IOAPIC for interrupt routing [ 0.056055] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 [ 0.058173] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.059957] PCI: Using MMCONFIG at e0000000 - e02fffff [ 0.066987] ACPI: No dock devices found. [ 0.067692] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.068001] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.068241] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.068746] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.069250] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.069755] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.070259] pci 0000:00:02.5: reg 20 io port: [0x3480-0x348f] [ 0.070798] pci 0000:00:02.5: PME# supported from D3cold [ 0.071299] pci 0000:00:02.5: PME# disabled [ 0.071873] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] [ 0.072001] pci 0000:00:02.7: reg 14 io port: [0x1000-0x107f] [ 0.072001] pci 0000:00:02.7: supports D1 D2 [ 0.072001] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.072001] pci 0000:00:02.7: PME# disabled [ 0.072001] pci 0000:00:03.0: reg 10 32bit mmio: [0xfa100000-0xfa100fff] [ 0.072001] pci 0000:00:03.1: reg 10 32bit mmio: [0xfa101000-0xfa101fff] [ 0.072001] pci 0000:00:03.2: reg 10 32bit mmio: [0xfa102000-0xfa102fff] [ 0.072001] pci 0000:00:03.3: reg 10 32bit mmio: [0xfa103000-0xfa103fff] [ 0.072001] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.072001] pci 0000:00:03.3: PME# disabled [ 0.072049] pci 0000:00:05.0: reg 10 io port: [0x34b0-0x34b7] [ 0.072552] pci 0000:00:05.0: reg 14 io port: [0x34a4-0x34a7] [ 0.073055] pci 0000:00:05.0: reg 18 io port: [0x34a8-0x34af] [ 0.073560] pci 0000:00:05.0: reg 1c io port: [0x34a0-0x34a3] [ 0.074067] pci 0000:00:05.0: reg 20 io port: [0x3490-0x349f] [ 0.074598] pci 0000:00:05.0: reg 24 io port: [0x3400-0x347f] [ 0.075130] pci 0000:00:05.0: PME# supported from D3cold [ 0.075630] pci 0000:00:05.0: PME# disabled [ 0.076001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.076001] pci 0000:00:06.0: PME# disabled [ 0.076001] pci 0000:00:09.0: reg 10 io port: [0x1800-0x18ff] [ 0.076001] pci 0000:00:09.0: reg 14 32bit mmio: [0xfa105000-0xfa1050ff] [ 0.076001] pci 0000:00:09.0: supports D1 D2 [ 0.076001] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.076001] pci 0000:00:09.0: PME# disabled [ 0.076001] pci 0000:00:0a.0: reg 10 io port: [0x2c00-0x2c07] [ 0.076001] pci 0000:00:0a.0: reg 14 io port: [0x2800-0x2803] [ 0.076001] pci 0000:00:0a.0: reg 18 io port: [0x2400-0x2407] [ 0.076001] pci 0000:00:0a.0: reg 1c io port: [0x2000-0x2003] [ 0.076001] pci 0000:00:0a.0: reg 20 io port: [0x1c00-0x1c0f] [ 0.076001] pci 0000:00:0a.0: reg 24 32bit mmio: [0xfa105400-0xfa1057ff] [ 0.076001] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.076001] pci 0000:00:0a.0: supports D1 D2 [ 0.076001] pci 0000:00:0c.0: reg 10 32bit mmio: [0xfa104000-0xfa104fff] [ 0.076001] pci 0000:00:0c.0: reg 14 io port: [0x3000-0x303f] [ 0.076001] pci 0000:00:0c.0: reg 18 32bit mmio: [0xfa000000-0xfa0fffff] [ 0.076001] pci 0000:00:0c.0: reg 30 32bit mmio pref: [0x000000-0x0fffff] [ 0.076001] pci 0000:00:0c.0: supports D1 D2 [ 0.076001] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.076001] pci 0000:00:0c.0: PME# disabled [ 0.076183] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold [ 0.076684] pci 0000:00:1f.0: PME# disabled [ 0.077252] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.078248] pci 0000:01:00.0: reg 14 32bit mmio: [0xfa200000-0xfa21ffff] [ 0.078752] pci 0000:01:00.0: reg 18 io port: [0x4000-0x407f] [ 0.079324] pci 0000:01:00.0: supports D1 D2 [ 0.079887] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio: [0xfa200000-0xfa2fffff] [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.080107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.081105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.081739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] [ 0.082340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:02.5 (XEN) PCI add device 00:02.7 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:03.1 (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:03.3 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:06.0 (XEN) PCI add device 00:09.0 (XEN) PCI add device 00:0a.0 (XEN) PCI add device 00:0c.0 (XEN) PCI add device 00:18.0 (XEN) PCI add device 00:18.1 (XEN) PCI add device 00:18.2 (XEN) PCI add device 00:18.3 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 01:00.0 [ 0.101755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.102921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.104063] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.105193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.106346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.107473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.108122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.109251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.110378] sync cpu 0 get result 1 max_id 0 [ 0.110881] alloc irq_desc for 505 on node 0 [ 0.111378] alloc kstat_irqs on node 0 [ 0.111933] xen_balloon: Initialising balloon driver with page order 0. [ 0.112113] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.113105] vgaarb: loaded [ 0.113771] PCI: Using ACPI for IRQ routing [ 0.114567] Switching to clocksource xen [ 0.116001] pnp: P[ 2.477802] usbcore: registered new interface driver usbfs [ 2.478347] usbcore: registered new interface driver hub [ 2.488701] usbcore: registered new device driver usb [ 2.501851] SCSI subsystem initialized [ 2.538255] libata version 3.00 loaded. [ 2.539420] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.539924] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.547859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.548444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.548980] xen: registering gsi 19 triggering 0 polarity 1 [ 2.549484] alloc irq_desc for 19 on node 0 [ 2.549982] alloc kstat_irqs on node 0 [ 2.550509] xen: --> irq=19 [ 2.551015] r8169 0000:00:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.551554] r8169 0000:00:09.0: no PCI Express capability [ 2.553032] eth0: RTL8110s at 0xffffc9000062e000, 00:30:05:d3:3e:73, XID 04000000 IRQ 19 [ 2.559216] xen: registering gsi 16 triggering 0 polarity 1 [ 2.559731] alloc irq_desc for 16 on node 0 [ 2.560019] alloc kstat_irqs on node 0 [ 2.560770] xen: --> irq=16 [ 2.561277] e100 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.584003] e100 0000:00:0c.0: PME# disabled [ 2.586782] e100: eth1: e100_probe: addr 0xfa104000, irq 16, MAC addr 00:02:b3:29:31:eb [ 2.589890] pata_sis 0000:00:02.5: version 0.5.2 [ 2.590421] xen: registering gsi 16 triggering 0 polarity 1 [ 2.590921] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.591418] xen: --> irq=16 [ 2.591950] Already setup the GSI :16 [ 2.592020] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.594650] scsi0 : pata_sis [ 2.595459] scsi1 : pata_sis [ 2.596969] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3480 irq 14 [ 2.597473] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3488 irq 15 [ 2.598658] xen: registering gsi 23 triggering 0 polarity 1 [ 2.599169] alloc irq_desc for 23 on node 0 [ 2.599666] alloc kstat_irqs on node 0 [ 2.600248] xen: --> irq=23 [ 2.600755] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.601778] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 2.602331] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 2.603421] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 2.603961] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfa103000 [ 2.612020] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 2.612590] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.613090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.614079] usb usb1: Product: EHCI Host Controller [ 2.614576] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 2.615074] usb usb1: SerialNumber: 0000:00:03.3 [ 2.615839] usb usb1: configuration #1 chosen from 1 choice [ 2.616510] hub 1-0:1.0: USB hub found [ 2.617077] hub 1-0:1.0: 8 ports detected [ 2.626539] sata_sil 0000:00:0a.0: version 2.4 [ 2.627104] xen: registering gsi 17 triggering 0 polarity 1 [ 2.627609] alloc irq_desc for 17 on node 0 [ 2.628026] alloc kstat_irqs on node 0 [ 2.628643] xen: --> irq=17 [ 2.629151] sata_sil 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.630418] scsi2 : sata_sil [ 2.631215] scsi3 : sata_sil [ 2.631925] scsi4 : sata_sil [ 2.632716] scsi5 : sata_sil [ 2.633389] ata3: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa105480 irq 17 [ 2.634412] ata4: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa1054c0 irq 17 [ 2.635407] ata5: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa105680 irq 17 [ 2.636397] ata6: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa1056c0 irq 17 [ 2.654999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.658482] xen: registering gsi 20 triggering 0 polarity 1 [ 2.658996] alloc irq_desc for 20 on node 0 [ 2.659522] alloc kstat_irqs on node 0 [ 2.660083] xen: --> irq=20 [ 2.660590] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.661618] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 2.662142] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 2.663212] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfa100000 [ 2.718104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.718609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.719600] usb usb2: Product: OHCI Host Controller [ 2.720005] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 2.720005] usb usb2: SerialNumber: 0000:00:03.0 [ 2.721369] usb usb2: configuration #1 chosen from 1 choice [ 2.722018] hub 2-0:1.0: USB hub found [ 2.722555] hub 2-0:1.0: 3 ports detected [ 2.723274] xen: registering gsi 21 triggering 0 polarity 1 [ 2.723782] alloc irq_desc for 21 on node 0 [ 2.724282] alloc kstat_irqs on node 0 [ 2.724809] xen: --> irq=21 [ 2.725315] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.726364] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 2.726882] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 2.727949] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfa101000 [ 2.782063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.782567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.783554] usb usb3: Product: OHCI Host Controller [ 2.784009] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 2.784009] usb usb3: SerialNumber: 0000:00:03.1 [ 2.785351] usb usb3: configuration #1 chosen from 1 choice [ 2.785980] hub 3-0:1.0: USB hub found [ 2.786518] hub 3-0:1.0: 3 ports detected [ 2.787216] xen: registering gsi 22 triggering 0 polarity 1 [ 2.787723] alloc irq_desc for 22 on node 0 [ 2.788227] alloc kstat_irqs on node 0 [ 2.788787] xen: --> irq=22 [ 2.789294] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.790538] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 2.791066] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 2.792174] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfa102000 [ 2.850062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.850566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.851581] usb usb4: Product: OHCI Host Controller [ 2.852005] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 2.852005] usb usb4: SerialNumber: 0000:00:03.2 [ 2.854093] usb usb4: configuration #1 chosen from 1 choice [ 2.854793] hub 4-0:1.0: USB hub found [ 2.855334] hub 4-0:1.0: 2 ports detected [ 2.956031] ata3: SATA link down (SStatus 0 SControl 310) [ 3.276040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.300331] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 3.300834] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.308304] ata4.00: configured for UDMA/100 [ 3.308982] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.628031] ata5: SATA link down (SStatus 0 SControl 310) [ 3.948039] ata6: SATA link down (SStatus 0 SControl 310) [ 3.964301] sata_sis 0000:00:05.0: version 1.0 [ 3.964832] xen: registering gsi 17 triggering 0 polarity 1 [ 3.965360] xen_allocate_pirq: returning irq 17 for gsi 17 [ 3.965858] xen: --> irq=17 [ 3.966356] Already setup the GSI :17 [ 3.966853] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.967848] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset [ 3.987551] scsi6 : sata_sis [ 3.988405] scsi7 : sata_sis [ 3.989439] ata7: SATA max UDMA/133 cmd 0x34b0 ctl 0x34a4 bmdma 0x3490 irq 17 [ 3.990463] ata8: SATA max UDMA/133 cmd 0x34a8 ctl 0x34a0 bmdma 0x3498 irq 17 [ 3.992764] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.993866] sd 3:0:0:0: [sda] Write Protect is off [ 3.994392] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.994927] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.996916] sda: sda1 [ 4.035345] sd 3:0:0:0: [sda] Attached SCSI disk [ 4.308087] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.316438] ata7.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133 [ 4.316939] ata7.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.324426] ata7.00: configured for UDMA/133 [ 4.325072] scsi 6:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5 [ 4.326791] sd 6:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.327885] sd 6:0:0:0: [sdb] Write Protect is off [ 4.328358] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.328957] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.330226] sdb: sdb1 [ 4.339084] sd 6:0:0:0: [sdb] Attached SCSI disk [ 4.644065] ata8: SATA link down (SStatus 0 SControl 300) [ 5.552048] floppy0: no floppy controllers found [ 5.602342] device-mapper: uevent: version 1.0.3 [ 5.604238] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com udevd-work[79]: kernel-provided name 'dm-0' and NAME= 'mapper/vg0-boole--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[79]: kernel-provided name 'dm-1' and NAME= 'mapper/vg0-boole--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 5.929616] PM: Starting manual resume from disk [ 5.930123] PM: Resume from partition 254:1 [ 5.930648] PM: Checking hibernation image. [ 5.931436] PM: Error -22 checking image file [ 5.931935] PM: Resume from disk failed. [ 6.017481] kjournald starting. Commit interval 5 seconds [ 6.018026] EXT3-fs: mounted filesystem with ordered data mode. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 7.642726] udev: starting version 154 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 8.310862] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 8.311895] ACPI: Power Button [PWRB] [ 8.328198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.329207] ACPI: Power Button [PWRF] [ 8.415220] processor LNXCPU:00: registered as cooling_device0 [ 8.483916] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.615432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.126294] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.142026] EDAC MC: Ver: 2.1.0 Jun 1 2010 [ 9.202855] parport_pc 00:07: reported by Plug and Play ACPI [ 9.203480] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 9.263445] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010 [ 9.264173] EDAC amd64: ECC is enabled by BIOS. [ 9.264729] EDAC MC: Rev E or earlier detected [ 9.265375] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 9.266403] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 9.620988] Error: Driver 'pcspkr' is already registered, aborting... [ 12.152049] floppy0: no floppy controllers found done. Setting parameters of disc: (none). Invalidating stale software suspend images... done. ^[%@Checking root file system...fsck from util-linux-ng 2.16.2 /dev/mapper/vg0-boole--root: clean, 80774/415344 files, 612601/1653760 blocks done. [ 12.907049] EXT3 FS on dm-0, internal journal Cleaning up ifupdown.... [ 13.168353] loop: module loaded Loading kernel modules...done. Setting up networking.... Setting up LVM Volume Groups Reading all physical volumes. This may take a while... Found volume group "vg0" using metadata type lvm2 Found volume group "vg1" using metadata type lvm2 6 logical volume(s) in volume group "vg0" now active udevd-work[379]: kernel-provided name 'dm-4' and NAME= 'mapper/vg0-hahn--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[376]: kernel-provided name 'dm-2' and NAME= 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[378]: kernel-provided name 'dm-3' and NAME= 'mapper/vg0-hahn--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[382]: kernel-provided name 'dm-6' and NAME= 'mapper/vg1-stokes--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[380]: kernel-provided name 'dm-5' and NAME= 'mapper/vg0-hahn--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[376]: kernel-provided name 'dm-7' and NAME= 'mapper/vg1-stokes--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[378]: kernel-provided name 'dm-8' and NAME= 'mapper/vg1-stokes--data' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[379]: kernel-provided name 'dm-9' and NAME= 'mapper/vg1-kepler--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[376]: kernel-provided name 'dm-10' and NAME= 'mapper/vg1-kepler--data' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[378]: kernel-provided name 'dm-11' and NAME= 'mapper/vg1-kepler--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[379]: kernel-provided name 'dm-12' and NAME= 'mapper/vg1-poisson--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[380]: kernel-provided name 'dm-13' and NAME= 'mapper/vg1-poisson--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name udevd-work[376]: kernel-provided name 'dm-14' and NAME= 'mapper/vg1-hamilton--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name 11 logical volume(s) in volume group "vg1" now active udevd-work[378]: kernel-provided name 'dm-15' and NAME= 'mapper/vg1-hamilton--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name . Activating lvm and md swap...udevd-work[376]: kernel-provided name 'dm-16' and NAME= 'mapper/vg1-abel--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 14.520553] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1 extents:1 across:974840k done. Checking file systems...fsck from util-linux-ng 2.16.2 /dev/mapper/vg0-boole--data--local: clean, 300462/1617472 files, 4073213/6516736 blocks done. Mounting local filesystems...udevd-work[376]: kernel-provided name 'dm-2' and NAME= 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 14.692746] kjournald starting. Commit interval 5 seconds [ 14.693514] EXT3 FS on dm-2, internal journal [ 14.694018] EXT3-fs: mounted filesystem with ordered data mode. done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...[ 15.334232] Bridge firewalling registered [ 15.397696] device eth0 entered promiscuous mode [ 15.401931] r8169: eth0: link up [ 15.406393] device eth1 entered promiscuous mode [ 15.425604] e100 0000:00:0c.0: firmware: requesting e100/d101m_ucode.bin [ 15.480924] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.484299] e100: eth1 NIC Link is Up 100 Mbps Full Duplex [ 15.485780] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 15.491182] br0: port 2(eth1) entering learning state [ 15.491688] br0: port 1(eth0) entering learning state Waiting for br0 to get ready (MAXWAIT is 32 seconds). Setting kernel variables ...done. [ 25.700012] eth0: no IPv6 routers present [ 25.820008] eth1: no IPv6 routers present [ 25.892009] br0: no IPv6 routers present [ 30.488018] br0: port 2(eth1) entering forwarding state [ 30.488552] br0: port 1(eth0) entering forwarding state Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/br0/00:02:b3:29:31:eb Sending on LPF/br0/00:02:b3:29:31:eb Sending on Socket/fallback DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 2 No DHCPOFFERS received. No working leases in persistent database - sleeping. done. Cleaning up temporary files.... Setting console screen modes and fonts. cannot (un)set powersave mode ^[[9;30]^[[14;30][ 93.937149] fuse init (API version 7.13) Setting sensors limits. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. udevd-work[481]: kernel-provided name 'evtchn' and NAME= 'xen/evtchn' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 94.359169] Event-channel device installed. Starting enhanced syslogd: rsyslogd. [ 95.122279] alloc irq_desc for 500 on node 0 [ 95.122816] alloc kstat_irqs on node 0 [ 95.123433] alloc irq_desc for 499 on node 0 [ 95.123932] alloc kstat_irqs on node 0 [ 95.126221] XENBUS: Unable to read cpu state Starting ACPI services.... Starting anac(h)ronistic cron: anacron. Starting deferred execution scheduler: atd. Starting periodic command scheduler: cron. Starting system message bus: dbus. Starting kerneloops: Starting mail-transfer-agent: nullmailer. Starting Xen daemons: xenfs xenstored xenconsoled xend. Starting auto Xen domains: hamilton[ 104.719747] alloc irq_desc for 498 on node 0 [ 104.720022] alloc kstat_irqs on node 0 [ 105.453372] alloc irq_desc for 497 on node 0 [ 105.453909] alloc kstat_irqs on node 0 [ 105.535899] device vif1.0 entered promiscuous mode [ 105.555070] br0: port 3(vif1.0) entering learning state [ 107.190073] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) [ 107.190644] alloc irq_desc for 496 on node 0 [ 107.191141] alloc kstat_irqs on node 0 [ 107.210062] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) [ 107.210607] alloc irq_desc for 495 on node 0 [ 107.211104] alloc kstat_irqs on node 0 [ 107.250723] alloc irq_desc for 494 on node 0 [ 107.251226] alloc kstat_irqs on node 0 poisson[ 113.363323] alloc irq_desc for 493 on node 0 [ 113.363860] alloc kstat_irqs on node 0 [ 114.256144] device vif2.0 entered promiscuous mode [ 114.273273] br0: port 4(vif2.0) entering learning state [ 114.401420] alloc irq_desc for 492 on node 0 [ 114.401956] alloc kstat_irqs on node 0 [ 115.093754] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) [ 115.094334] alloc irq_desc for 491 on node 0 [ 115.094832] alloc kstat_irqs on node 0 [ 115.112689] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) [ 115.113236] alloc irq_desc for 490 on node 0 [ 115.113733] alloc kstat_irqs on node 0 [ 115.158579] alloc irq_desc for 489 on node 0 [ 115.159081] alloc kstat_irqs on node 0 [ 116.184011] vif1.0: no IPv6 routers present stokes[ 120.552156] br0: port 3(vif1.0) entering forwarding state [ 121.222354] alloc irq_desc for 488 on node 0 [ 121.222890] alloc kstat_irqs on node 0 [ 122.663290] device vif3.0 entered promiscuous mode [ 122.935537] br0: port 5(vif3.0) entering learning state [ 123.101861] alloc irq_desc for 487 on node 0 [ 123.102398] alloc kstat_irqs on node 0 [ 124.115613] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) [ 124.116222] alloc irq_desc for 486 on node 0 [ 124.116720] alloc kstat_irqs on node 0 [ 124.135739] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) [ 124.136320] alloc irq_desc for 485 on node 0 [ 124.136846] alloc kstat_irqs on node 0 [ 124.153937] blkback: ring-ref 10, event-channel 10, protocol 2 (x86_32-abi) [ 124.154485] alloc irq_desc for 484 on node 0 [ 124.154982] alloc kstat_irqs on node 0 [ 124.270923] alloc irq_desc for 483 on node 0 [ 124.271462] alloc kstat_irqs on node 0 [ 124.386590] vif2.0: no IPv6 routers present [done]. [ 129.272012] br0: port 4(vif2.0) entering forwarding state [ 133.636010] vif3.0: no IPv6 routers present [ 137.932012] br0: port 5(vif3.0) entering forwarding state Here I start the domU that is supposed to use the PCI device: [ 169.841776] alloc irq_desc for 482 on node 0 [ 169.842312] alloc kstat_irqs on node 0 [ 171.345662] device vif4.0 entered promiscuous mode [ 171.358478] br0: port 6(vif4.0) entering learning state [ 171.666476] pciback: vpci: 0000:00:02.7: assign to virtual slot 0 [ 171.795253] alloc irq_desc for 481 on node 0 [ 171.795791] alloc kstat_irqs on node 0 [ 173.956696] alloc irq_desc for 480 on node 0 [ 173.957231] alloc kstat_irqs on node 0 [ 174.310130] alloc irq_desc for 479 on node 0 [ 174.310666] alloc kstat_irqs on node 0 [ 174.329246] blkback: ring-ref 770, event-channel 10, protocol 2 (x86_32-abi) [ 174.329798] alloc irq_desc for 478 on node 0 [ 174.330296] alloc kstat_irqs on node 0 [ 174.382985] blkback: ring-ref 771, event-channel 11, protocol 2 (x86_32-abi) [ 174.384144] alloc irq_desc for 477 on node 0 [ 174.384662] alloc kstat_irqs on node 0 [ 174.408827] blkback: ring-ref 772, event-channel 12, protocol 2 (x86_32-abi) [ 174.409379] alloc irq_desc for 476 on node 0 [ 174.409876] alloc kstat_irqs on node 0 [ 181.812029] vif4.0: no IPv6 routers present [ 186.356264] br0: port 6(vif4.0) entering forwarding state Apparently the pciback does something. Boot log for the domU: [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 08:48:09 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 000000001c800000 (usable) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x1c800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 033ff000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001c800000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 001c800000 page 4k [ 0.000000] kernel direct mapping tables up to 1c800000 @ 100000-1e9000 [ 0.000000] RAMDISK: 01655000 - 02980000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 456MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1c800000 [ 0.000000] low ram: 0 - 1c800000 [ 0.000000] node 0 low ram: 00000000 - 1c800000 [ 0.000000] node 0 bootmap 00002000 - 00005900 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001c800000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [00029f5000 - 0002a0d000] XEN PAGETABLES ==> [00029f5000 - 0002a0d000] [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #4 [0001000000 - 000152fb34] TEXT DATA BSS ==> [0001000000 - 000152fb34] [ 0.000000] #5 [0001655000 - 0002980000] RAMDISK ==> [0001655000 - 0002980000] [ 0.000000] #6 [0002980000 - 00029f5000] XEN START INFO ==> [0002980000 - 00029f5000] [ 0.000000] #7 [0000100000 - 00001cd000] PGTABLE ==> [0000100000 - 00001cd000] [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001c800 [ 0.000000] HighMem 0x0001c800 -> 0x0001c800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001c800 [ 0.000000] On node 0 totalpages: 116640 [ 0.000000] free_area_init_node: node 0, pgdat c13eea80, node_mem_map c2a0d000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 [ 0.000000] Normal zone: 880 pages used for memmap [ 0.000000] Normal zone: 111760 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1c800000 (gap: 1c800000:e3800000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0 (preserve-AD) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2da1000 s37496 r0 d23944 u65536 [ 0.000000] pcpu-alloc: s37496 r0 d23944 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] trying to map vcpu_info 0 at c2da2010, mfn 29041, offset 16 [ 0.000000] cpu 0 using vcpu_info at c2da2010 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 115728 [ 0.000000] Kernel command line: root=/dev/xvda ro iommu=soft swiotlb=force [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between c2e13000 - c6e13000 [ 0.000000] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 [ 0.000000] xen_swiotlb_fixup: buf=c2e13000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=c6e73000 size=32768 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 369840k/466944k available (2619k kernel code, 96424k reserved, 1446k data, 400k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB) [ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB) [ 0.000000] vmalloc : 0xdd000000 - 0xf4ffe000 ( 383 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdc800000 ( 456 MB) [ 0.000000] .init : 0xc13f9000 - 0xc145d000 ( 400 kB) [ 0.000000] .data : 0xc128ee8d - 0xc13f8790 (1446 kB) [ 0.000000] .text : 0xc1000000 - 0xc128ee8d (2619 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1536 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 1800.063 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.12 BogoMIPS (lpj=7200252) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004000] Performance Events: AMD PMU driver. [ 0.004000] ... version: 0 [ 0.004000] ... bit width: 48 [ 0.004000] ... generic registers: 4 [ 0.004000] ... value mask: 0000ffffffffffff [ 0.004000] ... max period: 00007fffffffffff [ 0.004000] ... fixed-purpose events: 0 [ 0.004000] ... event mask: 000000000000000f [ 0.004000] SMP alternatives: switching to UP code [ 0.012688] Freeing SMP alternatives: 14k freed [ 0.013059] Brought up 1 CPUs [ 0.013084] CPU0 attaching NULL sched-domain. [ 0.013277] devtmpfs: initialized [ 0.014044] Grant table initialized [ 0.014058] regulator: core version 0.5 [ 0.014148] NET: Registered protocol family 16 [ 0.016725] PCI: setting up Xen PCI frontend stub [ 0.017626] bio: create slab <bio-0> at 0 [ 0.017736] ACPI: Interpreter disabled. [ 0.024075] xen_balloon: Initialising balloon driver with page order 0. [ 0.024145] vgaarb: loaded [ 0.024275] PCI: System does not support PCI [ 0.028001] PCI: System does not support PCI [ 0.028099] Switching to clocksource xen [ 0.030486] pnp: PnP ACPI: disabled [ 0.030528] PnPBIOS: Disabled [ 0.030955] NET: Registered protocol family 2 [ 0.031966] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.032787] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.032928] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033035] TCP: Hash tables configured (established 16384 bind 16384) [ 0.033047] TCP reno registered [ 0.033185] NET: Registered protocol family 1 [ 0.033279] Unpacking initramfs... [ 0.077224] Freeing initrd memory: 19628k freed [ 0.091372] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.091397] DMA: Placing 64MB software IO TLB between c2e13000 - c6e13000 [ 0.091408] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 [ 0.091516] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.091780] audit: initializing netlink socket (disabled) [ 0.091804] type=2000 audit(1275685176.668:1): initialized [ 0.092860] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.095217] VFS: Disk quotas dquot_6.5.2 [ 0.095316] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.095445] msgmni has been set to 761 [ 0.095771] alg: No test for stdrng (krng) [ 0.095878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095890] io scheduler noop registered [ 0.095898] io scheduler anticipatory registered [ 0.095906] io scheduler deadline registered [ 0.096083] io scheduler cfq registered (default) [ 0.112222] pcifront pci-0: Installing PCI frontend [ 0.112335] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 0.116512] isapnp: ISA Plug & Play support disabled [ 0.123844] registering netback [ 0.126404] Linux agpgart interface v0.103 [ 0.126563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.126966] PNP: No PS/2 controller found. Probing ports directly. [ 0.127795] i8042.c: No controller found. [ 0.127869] mice: PS/2 mouse device common for all mice [ 0.128147] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.128245] cpuidle: using governor ladder [ 0.128253] cpuidle: using governor menu [ 0.128264] No iBFT detected. [ 0.128701] TCP cubic registered [ 0.228093] NET: Registered protocol family 10 [ 0.228699] lo: Disabled Privacy Extensions [ 0.229113] Mobile IPv6 [ 0.229136] NET: Registered protocol family 17 [ 0.229193] Using IPI No-Shortcut mode [ 0.229353] PM: Resume from disk failed. [ 0.229365] registered taskstats version 1 [ 0.229426] XENBUS: Device with no driver: device/vbd/51712 [ 0.229455] XENBUS: Device with no driver: device/vbd/51728 [ 0.229480] XENBUS: Device with no driver: device/vbd/51744 [ 0.229488] XENBUS: Device with no driver: device/vif/0 [ 0.229497] XENBUS: Device with no driver: device/console/0 [ 0.229529] /build/buildd-linux-2.6_2.6.32-15-i386-fb7Hfg/linux-2.6-2.6.32/debian/build/source_i386_xen/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.229571] Initalizing network drop monitor service [ 0.229645] Freeing unused kernel memory: 400k freed [ 0.233197] Write protecting the kernel text: 2620k [ 0.233595] Write protecting the kernel read-only data: 964k [ 0.287600] udev: starting version 154 [ 0.404841] Initialising Xen virtual ethernet driver. [ 0.527189] blkfront: xvda: barriers enabled [ 0.530347] xvda: unknown partition table [ 0.604426] blkfront: xvdc: barriers enabled [ 0.607760] xvdc: unknown partition table [ 0.629003] blkfront: xvdb: barriers enabled [ 0.632120] xvdb: unknown partition table [ 0.685270] Setting capacity to 579076096 [ 0.685294] xvdc: detected capacity change from 0 to 296486961152 [ 0.840610] PM: Starting manual resume from disk [ 0.840629] PM: Resume from partition 202:16 [ 0.840633] PM: Checking hibernation image. [ 0.841455] PM: Error -22 checking image file [ 0.841460] PM: Resume from disk failed. [ 0.901114] kjournald starting. Commit interval 5 seconds [ 0.901148] EXT3-fs: mounted filesystem with ordered data mode. [ 2.311864] udev: starting version 154 [ 3.063457] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 3.113060] Error: Driver 'pcspkr' is already registered, aborting... [ 3.399478] Adding 655352k swap on /dev/xvdb. Priority:-1 extents:1 across:655352k SS [ 3.583101] EXT3 FS on xvda, internal journal [ 977.287888] kjournald starting. Commit interval 5 seconds [ 977.295032] EXT3 FS on xvdc, internal journal [ 977.295054] EXT3-fs: mounted filesystem with ordered data mode. [ 979.065859] RPC: Registered udp transport module. [ 979.065877] RPC: Registered tcp transport module. [ 979.065885] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 979.169060] Slow work thread pool: Starting up [ 979.169160] Slow work thread pool: Ready [ 979.169252] FS-Cache: Loaded [ 979.264207] FS-Cache: Netfs 'nfs' registered for caching [ 979.320718] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 979.816552] fuse init (API version 7.13) [ 980.445821] svc: failed to register lockdv1 RPC service (errno 97). [ 980.448618] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 980.490135] NFSD: starting 90-second grace period [ 989.240036] eth0: no IPv6 routers present But lspci doesn't show anything and /sys/bus/pci/devices/ is empty. Regards, Thomas [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 198 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: [Pkg-xen-devel] Problems with PCI pass-through 2010-06-04 22:42 ` [Pkg-xen-devel] Problems with PCI pass-through Thomas Schwinge @ 2010-06-07 15:13 ` Konrad Rzeszutek Wilk 2010-06-08 15:08 ` Konrad Rzeszutek Wilk 2010-06-09 14:55 ` Pasi Kärkkäinen 1 sibling, 1 reply; 5+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-06-07 15:13 UTC (permalink / raw) To: Thomas Schwinge; +Cc: Bastian Blank, pkg-xen-devel, xen-devel On Sat, Jun 05, 2010 at 12:42:15AM +0200, Thomas Schwinge wrote: > Hello! > > As I'm writing in > <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> > I'm having problems with PCI pass-through. Oh, sorry didn't pay attention to it. > > It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian > packages). Also I tested two different kernels (both .32 ones). > > > Some more details: > > On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > > I'm having problems getting PCI pass-through to work. Aha. I know exactly what the problem is.. .. snip.. > module /boot/vmlinuz-2.6.32-5-xen-amd64 /boot/vmlinuz-2.6.32-5-xen-amd64 xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug So 00:02.7.. .. snip.. > Apparently the pciback does something. > > Boot log for the domU: > > [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 08:48:09 UTC 2010 .. snip .. > [ 0.112222] pcifront pci-0: Installing PCI frontend > [ 0.112335] pcifront pci-0: Creating PCI Frontend Bus 0000:00 .. and here the bus is created by PCI frontend. The Linux kernel PCI interrogates the PCI bus by going over the bus and then each slot, and then each function (kind of). Here is the pseud-core (the real code is more convoluted): for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class; u8 type; class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) { func = 8; continue; } the deal is that if it finds that first func (0) returns 0xffffff (no device), then it skips over all of the other functions on the slot. In your case you are passing only function 7, so it skips right over your device as 0 returns 0xfffffff. If you pass in 00:02.0 and 00:02.7 it will work. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: [Pkg-xen-devel] Problems with PCI pass-through 2010-06-07 15:13 ` Konrad Rzeszutek Wilk @ 2010-06-08 15:08 ` Konrad Rzeszutek Wilk 2010-06-14 10:04 ` Thomas Schwinge 0 siblings, 1 reply; 5+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-06-08 15:08 UTC (permalink / raw) To: Thomas Schwinge Cc: Bastian Blank, pkg-xen-devel, Jeremy Fitzhardinge, xen-devel On Mon, Jun 07, 2010 at 11:13:56AM -0400, Konrad Rzeszutek Wilk wrote: > On Sat, Jun 05, 2010 at 12:42:15AM +0200, Thomas Schwinge wrote: > > Hello! > > > > As I'm writing in > > <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> > > I'm having problems with PCI pass-through. > > Oh, sorry didn't pay attention to it. > > > > It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian > > packages). Also I tested two different kernels (both .32 ones). > > > > > > Some more details: > > > > On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > > > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > > > I'm having problems getting PCI pass-through to work. > > Aha. I know exactly what the problem is.. And it is a regression (compared to say 2.6.27 or 2.6.18). There was some disussion about this: http://lkml.indiana.edu/hypermail//linux/kernel/0906.2/03861.html which ended up pulling out of the Linux kernel the functinality to scan for specific functions. Will have to add that to xen-pcifront driver.. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: [Pkg-xen-devel] Problems with PCI pass-through 2010-06-08 15:08 ` Konrad Rzeszutek Wilk @ 2010-06-14 10:04 ` Thomas Schwinge 0 siblings, 0 replies; 5+ messages in thread From: Thomas Schwinge @ 2010-06-14 10:04 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Bastian Blank, pkg-xen-devel, Jeremy Fitzhardinge, xen-devel [-- Attachment #1.1: Type: text/plain, Size: 1512 bytes --] Hello! On Tue, Jun 08, 2010 at 11:08:26AM -0400, Konrad Rzeszutek Wilk wrote: > On Mon, Jun 07, 2010 at 11:13:56AM -0400, Konrad Rzeszutek Wilk wrote: > > On Sat, Jun 05, 2010 at 12:42:15AM +0200, Thomas Schwinge wrote: > > > As I'm writing in > > > <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> > > > I'm having problems with PCI pass-through. > > > > Oh, sorry didn't pay attention to it. Well, no problem: that's a Debian-internal list, so that's why I re-posted it here -- where you did notice it. > > > It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian > > > packages). Also I tested two different kernels (both .32 ones). > > > > > > > > > Some more details: > > > > > > On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > > > > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > > > > I'm having problems getting PCI pass-through to work. > > > > Aha. I know exactly what the problem is.. Thanks for the explanatio. Indeed, adding the PCI 0 device does make it work! > And it is a regression (compared to say 2.6.27 or 2.6.18). > > There was some disussion about this: > http://lkml.indiana.edu/hypermail//linux/kernel/0906.2/03861.html > > which ended up pulling out of the Linux kernel the functinality to > scan for specific functions. > > Will have to add that to xen-pcifront driver.. If you need someone to test any patches, please ask. Regards, Thomas [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 198 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Pkg-xen-devel] Problems with PCI pass-through 2010-06-04 22:42 ` [Pkg-xen-devel] Problems with PCI pass-through Thomas Schwinge 2010-06-07 15:13 ` Konrad Rzeszutek Wilk @ 2010-06-09 14:55 ` Pasi Kärkkäinen 1 sibling, 0 replies; 5+ messages in thread From: Pasi Kärkkäinen @ 2010-06-09 14:55 UTC (permalink / raw) To: Thomas Schwinge; +Cc: Bastian Blank, pkg-xen-devel, xen-devel On Sat, Jun 05, 2010 at 12:42:15AM +0200, Thomas Schwinge wrote: > Hello! > > As I'm writing in > <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> > I'm having problems with PCI pass-through. > > It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian > packages). Also I tested two different kernels (both .32 ones). > > > Some more details: > > On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > > I'm having problems getting PCI pass-through to work. > > > > > > This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64 > > > 4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12. > > > > Can you try grabbing a kernel from Jeremy's xen.git xen/stable-2.6.32.x branch > > and compiling it.. ? > > I'll do that in case that the following doesn't yield an answer: > > > Just yesterday there was an user on ##xen telling it worked OK for him. > > Other than that.. dunno really. > > > > What's the Xen PCI backend mode on dom0 kernel .config? > > It's the same for the dom0 and domU: > > $ < /boot/config-2.6.32-5-xen-amd64 grep -i xen | grep -i pci > CONFIG_XEN_DOM0_PCI=y > # CONFIG_XEN_PCI_PASSTHROUGH is not set > CONFIG_PCI_XEN=y > CONFIG_XEN_PCIDEV_FRONTEND=y > CONFIG_XEN_PCIDEV_BACKEND=y > CONFIG_XEN_PCIDEV_BACKEND_VPCI=y > # CONFIG_XEN_PCIDEV_BACKEND_PASS is not set > Try using CONFIG_XEN_PCIDEV_BACKEND_PASS instead of CONFIG_XEN_PCIDEV_BACKEND_VPCI, maybe that helps.. dunno. -- Pasi > # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set > # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set > # CONFIG_XEN_PCIDEV_BE_DEBUG is not set > # CONFIG_XEN_PLATFORM_PCI is not set > > That seems correct to me. Right? > > > Here's how I boot the dom0: > > multiboot /boot/xen-4.0-amd64.gz noreboot com1=38400,8n1 vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring > module /boot/vmlinuz-2.6.32-5-xen-amd64 /boot/vmlinuz-2.6.32-5-xen-amd64 xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > module /boot/initrd.img-2.6.32-5-xen-amd64 /boot/initrd.img-2.6.32-5-xen-amd64 > > domU: > > kernel = '/boot/vmlinuz-2.6.32-5-xen-686' > ramdisk = '/boot/initrd.img-2.6.32-5-xen-686' > memory = 456 > name = 'kepler' > root = '/dev/xvda ro' > vif = [ 'mac=00:16:3e:23:85:35, bridge=br0' ] > disk = [ 'phy:vg1/kepler-root,xvda,w', 'phy:vg1/kepler-swap,xvdb,w', 'phy:vg1/kepler-data,xvdc,w'] > extra = 'iommu=soft swiotlb=force' > pci = [ '0000:00:02.7' ] > > Boot log for the dom0: > > (XEN) Xen version 4.0.0 (Debian 4.0.0-1~experimental.2) (waldi@debian.org) (gcc version 4.4.4 (Debian 4.4.4-3) ) Fri May 28 11:28:13 UTC 2010 > (XEN) Command line: com1=38400,8n1 vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 2 MBR signatures > (XEN) Found 2 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009dc00 (usable) > (XEN) 000000000009dc00 - 00000000000a0000 (reserved) > (XEN) 00000000000d6000 - 00000000000d8000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000009dee0000 (usable) > (XEN) 000000009dee0000 - 000000009deef000 (ACPI data) > (XEN) 000000009deef000 - 000000009df00000 (ACPI NVS) > (XEN) 000000009df00000 - 00000000a0000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec10000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000fff00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2480MB (2539720kB) > (XEN) ACPI: RSDP 000F7350, 0024 (r2 PTLTD ) > (XEN) ACPI: XSDT 9DEEB7E4, 004C (r1 PTLTD XSDT 50000 LTP 0) > (XEN) ACPI: FACP 9DEEB8A4, 00F4 (r3 FSC ÷Pè0\x11 50000 F4240) > (XEN) ACPI: DSDT 9DEEB998, 34FB (r1 FSC D2030 50000 MSFT 2000002) > (XEN) ACPI: FACS 9DEEFFC0, 0040 > (XEN) ACPI: SSDT 9DEEEE93, 00B5 (r1 PTLTD POWERNOW 50000 LTP 1) > (XEN) ACPI: APIC 9DEEEF48, 0050 (r1 PTLTD APIC 50000 LTP 0) > (XEN) ACPI: MCFG 9DEEEF98, 0040 (r1 PTLTD MCFG 50000 LTP 0) > (XEN) ACPI: BOOT 9DEEEFD8, 0028 (r1 PTLTD $SBFTBL$ 50000 LTP 1) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-000000009dee0000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000f73b0 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0xf008 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f004,0], pm1x_evt[f000,0] > (XEN) ACPI: wakeup_vec[9deeffcc], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) Processor #0 15:15 APIC version 16 > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 > (XEN) PCI: Not using MMCONFIG. > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 1800.096 MHz processor. > (XEN) Initing memory sharing. > (XEN) CPU0: AMD Flush Filter disabled > (XEN) AMD K8 machine check reporting enabled > (XEN) AMD-Vi: IOMMU not found! > (XEN) I/O virtualisation disabled > (XEN) Total of 1 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 > (XEN) Platform timer is 3.579MHz ACPI PM Timer > ÿ(XEN) Brought up 1 CPUs > (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16c1000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000094000000->0000000098000000 (589068 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff816c1000 > (XEN) Init. ramdisk: ffffffff816c1000->ffffffff833ea200 > (XEN) Phys-Mach map: ffffffff833eb000->ffffffff83889860 > (XEN) Start info: ffffffff8388a000->ffffffff8388a4b4 > (XEN) Page tables: ffffffff8388b000->ffffffff838ac000 > (XEN) Boot stack: ffffffff838ac000->ffffffff838ad000 > (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 > (XEN) ENTRY ADDRESS: ffffffff81501200 > (XEN) Dom0 has maximum 1 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is keeping VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 164kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 06:38:33 UTC 2010 > [ 0.000000] Command line: xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] released 0 pages of unused memory > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable) > [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000093d0c000 (usable) > [ 0.000000] Xen: 000000009dee0000 - 000000009deef000 (ACPI data) > [ 0.000000] Xen: 000000009deef000 - 000000009df00000 (ACPI NVS) > [ 0.000000] Xen: 000000009df00000 - 00000000a0000000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] DMI present. > [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0x93d0c max_arch_pfn = 0x400000000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000093d0c000 > [ 0.000000] 0000000000 - 0093d0c000 page 4k > [ 0.000000] kernel direct mapping tables up to 93d0c000 @ 100000-5a3000 > [ 0.000000] RAMDISK: 016c1000 - 033ea200 > [ 0.000000] ACPI: RSDP 00000000000f7350 00024 (v02 PTLTD ) > [ 0.000000] ACPI: XSDT 000000009deeb7e4 0004C (v01 PTLTD ? XSDT 00050000 LTP 00000000) > [ 0.000000] ACPI: FACP 000000009deeb8a4 000F4 (v03 FSC ÷Pè0? 00050000 000F4240) > [ 0.000000] ACPI: DSDT 000000009deeb998 034FB (v01 FSC D2030 00050000 MSFT 02000002) > [ 0.000000] ACPI: FACS 000000009deeffc0 00040 > [ 0.000000] ACPI: SSDT 000000009deeee93 000B5 (v01 PTLTD POWERNOW 00050000 LTP 00000001) > [ 0.000000] ACPI: APIC 000000009deeef48 00050 (v01 PTLTD ? APIC 00050000 LTP 00000000) > [ 0.000000] ACPI: MCFG 000000009deeef98 00040 (v01 PTLTD MCFG 00050000 LTP 00000000) > [ 0.000000] ACPI: BOOT 000000009deeefd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000093d0c000 > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000093d0c000 > [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] > [ 0.000000] bootmap [0000000000018000 - 000000000002a7a7] pages 13 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0093d0c000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [000388b000 - 00038ac000] XEN PAGETABLES ==> [000388b000 - 00038ac000] > [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > [ 0.000000] #3 [0001000000 - 00016a0594] TEXT DATA BSS ==> [0001000000 - 00016a0594] > [ 0.000000] #4 [00016c1000 - 00033ea200] RAMDISK ==> [00016c1000 - 00033ea200] > [ 0.000000] #5 [00033eb000 - 000388b000] XEN START INFO ==> [00033eb000 - 000388b000] > [ 0.000000] #6 [00016a1000 - 00016a11c4] BRK ==> [00016a1000 - 00016a11c4] > [ 0.000000] #7 [0000100000 - 000057f000] PGTABLE ==> [0000100000 - 000057f000] > [ 0.000000] found SMP MP-table at [ffff8800000f73b0] f73b0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00100000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009d > [ 0.000000] 0: 0x00000100 -> 0x00093d0c > [ 0.000000] On node 0 totalpages: 605337 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1154 pages reserved > [ 0.000000] DMA zone: 2771 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 8222 pages used for memmap > [ 0.000000] DMA32 zone: 593134 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 256 > [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.0.0 (preserve-AD) (dom0) > [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800038e2000 s90008 r8192 d20584 u118784 > [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] trying to map vcpu_info 0 at ffff8800038ed020, mfn 978ed, offset 32 > [ 0.000000] cpu 0 using vcpu_info at ffff8800038ed020 > [ 0.000000] Xen: using vcpu_info placement > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 595905 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: xen-pciback.hide=(00:02.7) root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880005e00000 - ffff880009e00000 > [ 0.000000] DMA: software IO TLB at phys 0x5e00000 - 0x9e00000 > [ 0.000000] xen_swiotlb_fixup: buf=ffff880005e00000 size=67108864 > [ 0.000000] xen_swiotlb_fixup: buf=ffff880009e60000 size=32768 > [ 0.000000] Memory: 2274720k/2421808k available (3131k kernel code, 460k absent, 146628k reserved, 1899k data, 592k init) > [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:512 > [ 0.000000] xen: --> irq=0 > [ 0.000000] xen: --> irq=1 > [ 0.000000] xen: --> irq=2 > [ 0.000000] xen: --> irq=3 > [ 0.000000] xen: --> irq=4 > [ 0.000000] xen: --> irq=5 > [ 0.000000] xen: --> irq=6 > [ 0.000000] xen: --> irq=7 > [ 0.000000] xen: --> irq=8 > [ 0.000000] xen: --> irq=9 > [ 0.000000] xen: --> irq=10 > [ 0.000000] xen: --> irq=11 > [ 0.000000] xen: --> irq=12 > [ 0.000000] xen: --> irq=13 > [ 0.000000] xen: --> irq=14 > [ 0.000000] xen: --> irq=15 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [hvc0] enabled, bootconsole disabled > [ 0.000000] console [hvc0] enabled, bootconsole disabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] alloc irq_desc for 511 on node 0 > [ 0.000000] alloc kstat_irqs on node 0 > [ 0.000000] Detected 1800.096 MHz processor. > [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.19 BogoMIPS (lpj=7200384) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.007156] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.008971] Mount-cache hash table entries: 256 > [ 0.009697] Initializing cgroup subsys ns > [ 0.010197] Initializing cgroup subsys cpuacct > [ 0.010697] Initializing cgroup subsys devices > [ 0.011198] Initializing cgroup subsys freezer > [ 0.011695] Initializing cgroup subsys net_cls > [ 0.012066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [ 0.013057] CPU: L2 Cache: 128K (64 bytes/line) > [ 0.013554] CPU 0/0x0 -> Node 0 > [ 0.014050] tseg: 009df00000 > [ 0.014547] mce: CPU supports 5 MCE banks > (XEN) MCE: MSR 417 is not MCA MSR > (XEN) traps.c:2870: GPF (0000): ffff82c480174806 -> ffff82c4801f6a9d > [ 0.016010] Performance Events: AMD PMU driver. > [ 0.016535] ------------[ cut here ]------------ > [ 0.017038] WARNING: at /build/buildd-linux-2.6_2.6.32-15-amd64-PisqNL/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:731 init_hw_perf_events+0x32d/0x3cd() > [ 0.018524] Hardware name: D2264-A1 > [ 0.019018] Modules linked in: > [ 0.019516] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 > [ 0.020000] Call Trace: > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff8104fc58>] ? warn_slowpath_common+0x77/0xa3 > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff813034ec>] ? identify_cpu+0x2ff/0x308 > [ 0.020000] [<ffffffff8100ee0f>] ? xen_restore_fl_direct_end+0x0/0x1 > [ 0.020000] [<ffffffff810e86c1>] ? kmem_cache_alloc+0x8c/0xf0 > [ 0.020000] [<ffffffff81508732>] ? identify_boot_cpu+0x15/0x3e > [ 0.020000] [<ffffffff815087b9>] ? check_bugs+0x9/0x2e > [ 0.020000] [<ffffffff81501cc2>] ? start_kernel+0x3cd/0x3e8 > [ 0.020000] [<ffffffff81503c38>] ? xen_start_kernel+0x649/0x64f > [ 0.020000] ---[ end trace a7919e7f17c0a725 ]--- > [ 0.020000] ... version: 0 > [ 0.020000] ... bit width: 48 > [ 0.020000] ... generic registers: 4 > [ 0.020000] ... value mask: 0000ffffffffffff > [ 0.020000] ... max period: 00007fffffffffff > [ 0.020000] ... fixed-purpose events: 0 > [ 0.020000] ... event mask: 000000000000000f > [ 0.020000] SMP alternatives: switching to UP code > [ 0.020000] Freeing SMP alternatives: 28k freed > [ 0.020000] ACPI: Core revision 20090903 > [ 0.027227] alloc irq_desc for 510 on node 0 > [ 0.027730] alloc kstat_irqs on node 0 > [ 0.028019] alloc irq_desc for 509 on node 0 > [ 0.028515] alloc kstat_irqs on node 0 > [ 0.029016] alloc irq_desc for 508 on node 0 > [ 0.029538] alloc kstat_irqs on node 0 > [ 0.030040] alloc irq_desc for 507 on node 0 > [ 0.030536] alloc kstat_irqs on node 0 > [ 0.031198] Brought up 1 CPUs > [ 0.031727] CPU0 attaching NULL sched-domain. > [ 0.032177] devtmpfs: initialized > [ 0.037032] Grant table initialized > [ 0.037558] regulator: core version 0.5 > [ 0.038139] NET: Registered protocol family 16 > [ 0.038730] alloc irq_desc for 506 on node 0 > [ 0.039228] alloc kstat_irqs on node 0 > [ 0.039933] node 0 link 0: io port [0, fffff] > [ 0.040018] TOM: 00000000a0000000 aka 2560M > [ 0.040517] node 0 link 0: mmio [e0000000, efffffff] > [ 0.041049] node 0 link 0: mmio [a0000, bffff] > [ 0.041549] node 0 link 0: mmio [a0000000, fe0bffff] > [ 0.042049] bus: [00,ff] on node 0 link 0 > [ 0.042545] bus: 00 index 0 io port: [0, ffff] > [ 0.043041] bus: 00 index 1 mmio: [a0000000, fcffffffff] > [ 0.043539] bus: 00 index 2 mmio: [a0000, bffff] > [ 0.044001] ACPI: bus type pci registered > [ 0.044106] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 > [ 0.044632] PCI: Not using MMCONFIG. > [ 0.045128] PCI: Using configuration type 1 for base access > [ 0.046525] bio: create slab <bio-0> at 0 > [ 0.048274] ERROR: Unable to locate IOAPIC for GSI 9 > [ 0.048844] ACPI: EC: Look up EC in DSDT > [ 0.054875] ACPI: Interpreter enabled > [ 0.055380] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.055919] ACPI: Using IOAPIC for interrupt routing > [ 0.056055] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 > [ 0.058173] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > [ 0.059957] PCI: Using MMCONFIG at e0000000 - e02fffff > [ 0.066987] ACPI: No dock devices found. > [ 0.067692] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.068001] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff] > [ 0.068241] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] > [ 0.068746] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] > [ 0.069250] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] > [ 0.069755] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] > [ 0.070259] pci 0000:00:02.5: reg 20 io port: [0x3480-0x348f] > [ 0.070798] pci 0000:00:02.5: PME# supported from D3cold > [ 0.071299] pci 0000:00:02.5: PME# disabled > [ 0.071873] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] > [ 0.072001] pci 0000:00:02.7: reg 14 io port: [0x1000-0x107f] > [ 0.072001] pci 0000:00:02.7: supports D1 D2 > [ 0.072001] pci 0000:00:02.7: PME# supported from D3hot D3cold > [ 0.072001] pci 0000:00:02.7: PME# disabled > [ 0.072001] pci 0000:00:03.0: reg 10 32bit mmio: [0xfa100000-0xfa100fff] > [ 0.072001] pci 0000:00:03.1: reg 10 32bit mmio: [0xfa101000-0xfa101fff] > [ 0.072001] pci 0000:00:03.2: reg 10 32bit mmio: [0xfa102000-0xfa102fff] > [ 0.072001] pci 0000:00:03.3: reg 10 32bit mmio: [0xfa103000-0xfa103fff] > [ 0.072001] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold > [ 0.072001] pci 0000:00:03.3: PME# disabled > [ 0.072049] pci 0000:00:05.0: reg 10 io port: [0x34b0-0x34b7] > [ 0.072552] pci 0000:00:05.0: reg 14 io port: [0x34a4-0x34a7] > [ 0.073055] pci 0000:00:05.0: reg 18 io port: [0x34a8-0x34af] > [ 0.073560] pci 0000:00:05.0: reg 1c io port: [0x34a0-0x34a3] > [ 0.074067] pci 0000:00:05.0: reg 20 io port: [0x3490-0x349f] > [ 0.074598] pci 0000:00:05.0: reg 24 io port: [0x3400-0x347f] > [ 0.075130] pci 0000:00:05.0: PME# supported from D3cold > [ 0.075630] pci 0000:00:05.0: PME# disabled > [ 0.076001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > [ 0.076001] pci 0000:00:06.0: PME# disabled > [ 0.076001] pci 0000:00:09.0: reg 10 io port: [0x1800-0x18ff] > [ 0.076001] pci 0000:00:09.0: reg 14 32bit mmio: [0xfa105000-0xfa1050ff] > [ 0.076001] pci 0000:00:09.0: supports D1 D2 > [ 0.076001] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold > [ 0.076001] pci 0000:00:09.0: PME# disabled > [ 0.076001] pci 0000:00:0a.0: reg 10 io port: [0x2c00-0x2c07] > [ 0.076001] pci 0000:00:0a.0: reg 14 io port: [0x2800-0x2803] > [ 0.076001] pci 0000:00:0a.0: reg 18 io port: [0x2400-0x2407] > [ 0.076001] pci 0000:00:0a.0: reg 1c io port: [0x2000-0x2003] > [ 0.076001] pci 0000:00:0a.0: reg 20 io port: [0x1c00-0x1c0f] > [ 0.076001] pci 0000:00:0a.0: reg 24 32bit mmio: [0xfa105400-0xfa1057ff] > [ 0.076001] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] > [ 0.076001] pci 0000:00:0a.0: supports D1 D2 > [ 0.076001] pci 0000:00:0c.0: reg 10 32bit mmio: [0xfa104000-0xfa104fff] > [ 0.076001] pci 0000:00:0c.0: reg 14 io port: [0x3000-0x303f] > [ 0.076001] pci 0000:00:0c.0: reg 18 32bit mmio: [0xfa000000-0xfa0fffff] > [ 0.076001] pci 0000:00:0c.0: reg 30 32bit mmio pref: [0x000000-0x0fffff] > [ 0.076001] pci 0000:00:0c.0: supports D1 D2 > [ 0.076001] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.076001] pci 0000:00:0c.0: PME# disabled > [ 0.076183] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold > [ 0.076684] pci 0000:00:1f.0: PME# disabled > [ 0.077252] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] > [ 0.078248] pci 0000:01:00.0: reg 14 32bit mmio: [0xfa200000-0xfa21ffff] > [ 0.078752] pci 0000:01:00.0: reg 18 io port: [0x4000-0x407f] > [ 0.079324] pci 0000:01:00.0: supports D1 D2 > [ 0.079887] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] > [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio: [0xfa200000-0xfa2fffff] > [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] > [ 0.080107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.081105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > [ 0.081739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] > [ 0.082340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:01.0 > (XEN) PCI add device 00:02.0 > (XEN) PCI add device 00:02.5 > (XEN) PCI add device 00:02.7 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:03.1 > (XEN) PCI add device 00:03.2 > (XEN) PCI add device 00:03.3 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:06.0 > (XEN) PCI add device 00:09.0 > (XEN) PCI add device 00:0a.0 > (XEN) PCI add device 00:0c.0 > (XEN) PCI add device 00:18.0 > (XEN) PCI add device 00:18.1 > (XEN) PCI add device 00:18.2 > (XEN) PCI add device 00:18.3 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 01:00.0 > [ 0.101755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > [ 0.102921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > [ 0.104063] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > [ 0.105193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > [ 0.106346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > [ 0.107473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > [ 0.108122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > [ 0.109251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > [ 0.110378] sync cpu 0 get result 1 max_id 0 > [ 0.110881] alloc irq_desc for 505 on node 0 > [ 0.111378] alloc kstat_irqs on node 0 > [ 0.111933] xen_balloon: Initialising balloon driver with page order 0. > [ 0.112113] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.113105] vgaarb: loaded > [ 0.113771] PCI: Using ACPI for IRQ routing > [ 0.114567] Switching to clocksource xen > [ 0.116001] pnp: P[ 2.477802] usbcore: registered new interface driver usbfs > [ 2.478347] usbcore: registered new interface driver hub > [ 2.488701] usbcore: registered new device driver usb > [ 2.501851] SCSI subsystem initialized > [ 2.538255] libata version 3.00 loaded. > [ 2.539420] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > [ 2.539924] e100: Copyright(c) 1999-2006 Intel Corporation > [ 2.547859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.548444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.548980] xen: registering gsi 19 triggering 0 polarity 1 > [ 2.549484] alloc irq_desc for 19 on node 0 > [ 2.549982] alloc kstat_irqs on node 0 > [ 2.550509] xen: --> irq=19 > [ 2.551015] r8169 0000:00:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 2.551554] r8169 0000:00:09.0: no PCI Express capability > [ 2.553032] eth0: RTL8110s at 0xffffc9000062e000, 00:30:05:d3:3e:73, XID 04000000 IRQ 19 > [ 2.559216] xen: registering gsi 16 triggering 0 polarity 1 > [ 2.559731] alloc irq_desc for 16 on node 0 > [ 2.560019] alloc kstat_irqs on node 0 > [ 2.560770] xen: --> irq=16 > [ 2.561277] e100 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.584003] e100 0000:00:0c.0: PME# disabled > [ 2.586782] e100: eth1: e100_probe: addr 0xfa104000, irq 16, MAC addr 00:02:b3:29:31:eb > [ 2.589890] pata_sis 0000:00:02.5: version 0.5.2 > [ 2.590421] xen: registering gsi 16 triggering 0 polarity 1 > [ 2.590921] xen_allocate_pirq: returning irq 16 for gsi 16 > [ 2.591418] xen: --> irq=16 > [ 2.591950] Already setup the GSI :16 > [ 2.592020] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.594650] scsi0 : pata_sis > [ 2.595459] scsi1 : pata_sis > [ 2.596969] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3480 irq 14 > [ 2.597473] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3488 irq 15 > [ 2.598658] xen: registering gsi 23 triggering 0 polarity 1 > [ 2.599169] alloc irq_desc for 23 on node 0 > [ 2.599666] alloc kstat_irqs on node 0 > [ 2.600248] xen: --> irq=23 > [ 2.600755] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 > [ 2.601778] ehci_hcd 0000:00:03.3: EHCI Host Controller > [ 2.602331] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > [ 2.603421] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported > [ 2.603961] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfa103000 > [ 2.612020] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 > [ 2.612590] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.613090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 2.614079] usb usb1: Product: EHCI Host Controller > [ 2.614576] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd > [ 2.615074] usb usb1: SerialNumber: 0000:00:03.3 > [ 2.615839] usb usb1: configuration #1 chosen from 1 choice > [ 2.616510] hub 1-0:1.0: USB hub found > [ 2.617077] hub 1-0:1.0: 8 ports detected > [ 2.626539] sata_sil 0000:00:0a.0: version 2.4 > [ 2.627104] xen: registering gsi 17 triggering 0 polarity 1 > [ 2.627609] alloc irq_desc for 17 on node 0 > [ 2.628026] alloc kstat_irqs on node 0 > [ 2.628643] xen: --> irq=17 > [ 2.629151] sata_sil 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 2.630418] scsi2 : sata_sil > [ 2.631215] scsi3 : sata_sil > [ 2.631925] scsi4 : sata_sil > [ 2.632716] scsi5 : sata_sil > [ 2.633389] ata3: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa105480 irq 17 > [ 2.634412] ata4: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa1054c0 irq 17 > [ 2.635407] ata5: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa105680 irq 17 > [ 2.636397] ata6: SATA max UDMA/100 mmio m1024@0xfa105400 tf 0xfa1056c0 irq 17 > [ 2.654999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.658482] xen: registering gsi 20 triggering 0 polarity 1 > [ 2.658996] alloc irq_desc for 20 on node 0 > [ 2.659522] alloc kstat_irqs on node 0 > [ 2.660083] xen: --> irq=20 > [ 2.660590] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 2.661618] ohci_hcd 0000:00:03.0: OHCI Host Controller > [ 2.662142] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > [ 2.663212] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfa100000 > [ 2.718104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.718609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 2.719600] usb usb2: Product: OHCI Host Controller > [ 2.720005] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.720005] usb usb2: SerialNumber: 0000:00:03.0 > [ 2.721369] usb usb2: configuration #1 chosen from 1 choice > [ 2.722018] hub 2-0:1.0: USB hub found > [ 2.722555] hub 2-0:1.0: 3 ports detected > [ 2.723274] xen: registering gsi 21 triggering 0 polarity 1 > [ 2.723782] alloc irq_desc for 21 on node 0 > [ 2.724282] alloc kstat_irqs on node 0 > [ 2.724809] xen: --> irq=21 > [ 2.725315] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 2.726364] ohci_hcd 0000:00:03.1: OHCI Host Controller > [ 2.726882] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > [ 2.727949] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfa101000 > [ 2.782063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.782567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 2.783554] usb usb3: Product: OHCI Host Controller > [ 2.784009] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.784009] usb usb3: SerialNumber: 0000:00:03.1 > [ 2.785351] usb usb3: configuration #1 chosen from 1 choice > [ 2.785980] hub 3-0:1.0: USB hub found > [ 2.786518] hub 3-0:1.0: 3 ports detected > [ 2.787216] xen: registering gsi 22 triggering 0 polarity 1 > [ 2.787723] alloc irq_desc for 22 on node 0 > [ 2.788227] alloc kstat_irqs on node 0 > [ 2.788787] xen: --> irq=22 > [ 2.789294] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 2.790538] ohci_hcd 0000:00:03.2: OHCI Host Controller > [ 2.791066] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 > [ 2.792174] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfa102000 > [ 2.850062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.850566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 2.851581] usb usb4: Product: OHCI Host Controller > [ 2.852005] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.852005] usb usb4: SerialNumber: 0000:00:03.2 > [ 2.854093] usb usb4: configuration #1 chosen from 1 choice > [ 2.854793] hub 4-0:1.0: USB hub found > [ 2.855334] hub 4-0:1.0: 2 ports detected > [ 2.956031] ata3: SATA link down (SStatus 0 SControl 310) > [ 3.276040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > [ 3.300331] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 > [ 3.300834] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 3.308304] ata4.00: configured for UDMA/100 > [ 3.308982] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 > [ 3.628031] ata5: SATA link down (SStatus 0 SControl 310) > [ 3.948039] ata6: SATA link down (SStatus 0 SControl 310) > [ 3.964301] sata_sis 0000:00:05.0: version 1.0 > [ 3.964832] xen: registering gsi 17 triggering 0 polarity 1 > [ 3.965360] xen_allocate_pirq: returning irq 17 for gsi 17 > [ 3.965858] xen: --> irq=17 > [ 3.966356] Already setup the GSI :17 > [ 3.966853] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 3.967848] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset > [ 3.987551] scsi6 : sata_sis > [ 3.988405] scsi7 : sata_sis > [ 3.989439] ata7: SATA max UDMA/133 cmd 0x34b0 ctl 0x34a4 bmdma 0x3490 irq 17 > [ 3.990463] ata8: SATA max UDMA/133 cmd 0x34a8 ctl 0x34a0 bmdma 0x3498 irq 17 > [ 3.992764] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) > [ 3.993866] sd 3:0:0:0: [sda] Write Protect is off > [ 3.994392] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.994927] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 3.996916] sda: sda1 > [ 4.035345] sd 3:0:0:0: [sda] Attached SCSI disk > [ 4.308087] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 4.316438] ata7.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133 > [ 4.316939] ata7.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 4.324426] ata7.00: configured for UDMA/133 > [ 4.325072] scsi 6:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5 > [ 4.326791] sd 6:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) > [ 4.327885] sd 6:0:0:0: [sdb] Write Protect is off > [ 4.328358] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 4.328957] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.330226] sdb: sdb1 > [ 4.339084] sd 6:0:0:0: [sdb] Attached SCSI disk > [ 4.644065] ata8: SATA link down (SStatus 0 SControl 300) > [ 5.552048] floppy0: no floppy controllers found > [ 5.602342] device-mapper: uevent: version 1.0.3 > [ 5.604238] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com > udevd-work[79]: kernel-provided name 'dm-0' and NAME= 'mapper/vg0-boole--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[79]: kernel-provided name 'dm-1' and NAME= 'mapper/vg0-boole--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > [ 5.929616] PM: Starting manual resume from disk > [ 5.930123] PM: Resume from partition 254:1 > [ 5.930648] PM: Checking hibernation image. > [ 5.931436] PM: Error -22 checking image file > [ 5.931935] PM: Resume from disk failed. > [ 6.017481] kjournald starting. Commit interval 5 seconds > [ 6.018026] EXT3-fs: mounted filesystem with ordered data mode. > INIT: version 2.88 booting > Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd[ 7.642726] udev: starting version 154 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...[ 8.310862] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 > [ 8.311895] ACPI: Power Button [PWRB] > [ 8.328198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > [ 8.329207] ACPI: Power Button [PWRF] > [ 8.415220] processor LNXCPU:00: registered as cooling_device0 > [ 8.483916] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 8.615432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 9.126294] input: PC Speaker as /devices/platform/pcspkr/input/input4 > [ 9.142026] EDAC MC: Ver: 2.1.0 Jun 1 2010 > [ 9.202855] parport_pc 00:07: reported by Plug and Play ACPI > [ 9.203480] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > [ 9.263445] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010 > [ 9.264173] EDAC amd64: ECC is enabled by BIOS. > [ 9.264729] EDAC MC: Rev E or earlier detected > [ 9.265375] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 > [ 9.266403] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) > [ 9.620988] Error: Driver 'pcspkr' is already registered, aborting... > [ 12.152049] floppy0: no floppy controllers found > done. > Setting parameters of disc: (none). > Invalidating stale software suspend images... done. > ^[%@Checking root file system...fsck from util-linux-ng 2.16.2 > /dev/mapper/vg0-boole--root: clean, 80774/415344 files, 612601/1653760 blocks > done. > [ 12.907049] EXT3 FS on dm-0, internal journal > Cleaning up ifupdown.... > [ 13.168353] loop: module loaded > Loading kernel modules...done. > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a while... > Found volume group "vg0" using metadata type lvm2 > Found volume group "vg1" using metadata type lvm2 > 6 logical volume(s) in volume group "vg0" now active > udevd-work[379]: kernel-provided name 'dm-4' and NAME= 'mapper/vg0-hahn--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-2' and NAME= 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-3' and NAME= 'mapper/vg0-hahn--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[382]: kernel-provided name 'dm-6' and NAME= 'mapper/vg1-stokes--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[380]: kernel-provided name 'dm-5' and NAME= 'mapper/vg0-hahn--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-7' and NAME= 'mapper/vg1-stokes--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-8' and NAME= 'mapper/vg1-stokes--data' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[379]: kernel-provided name 'dm-9' and NAME= 'mapper/vg1-kepler--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-10' and NAME= 'mapper/vg1-kepler--data' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-11' and NAME= 'mapper/vg1-kepler--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[379]: kernel-provided name 'dm-12' and NAME= 'mapper/vg1-poisson--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[380]: kernel-provided name 'dm-13' and NAME= 'mapper/vg1-poisson--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-14' and NAME= 'mapper/vg1-hamilton--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > 11 logical volume(s) in volume group "vg1" now active > udevd-work[378]: kernel-provided name 'dm-15' and NAME= 'mapper/vg1-hamilton--root' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > . > Activating lvm and md swap...udevd-work[376]: kernel-provided name 'dm-16' and NAME= 'mapper/vg1-abel--swap' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > [ 14.520553] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1 extents:1 across:974840k > done. > Checking file systems...fsck from util-linux-ng 2.16.2 > /dev/mapper/vg0-boole--data--local: clean, 300462/1617472 files, 4073213/6516736 blocks > done. > Mounting local filesystems...udevd-work[376]: kernel-provided name 'dm-2' and NAME= 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > [ 14.692746] kjournald starting. Commit interval 5 seconds > [ 14.693514] EXT3 FS on dm-2, internal journal > [ 14.694018] EXT3-fs: mounted filesystem with ordered data mode. > done. > Activating swapfile swap...done. > Cleaning up temporary files.... > Configuring network interfaces...[ 15.334232] Bridge firewalling registered > [ 15.397696] device eth0 entered promiscuous mode > [ 15.401931] r8169: eth0: link up > [ 15.406393] device eth1 entered promiscuous mode > [ 15.425604] e100 0000:00:0c.0: firmware: requesting e100/d101m_ucode.bin > [ 15.480924] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 15.484299] e100: eth1 NIC Link is Up 100 Mbps Full Duplex > [ 15.485780] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > [ 15.491182] br0: port 2(eth1) entering learning state > [ 15.491688] br0: port 1(eth0) entering learning state > > Waiting for br0 to get ready (MAXWAIT is 32 seconds). > Setting kernel variables ...done. > [ 25.700012] eth0: no IPv6 routers present > [ 25.820008] eth1: no IPv6 routers present > [ 25.892009] br0: no IPv6 routers present > [ 30.488018] br0: port 2(eth1) entering forwarding state > [ 30.488552] br0: port 1(eth0) entering forwarding state > Internet Systems Consortium DHCP Client V3.1.3 > Copyright 2004-2009 Internet Systems Consortium. > All rights reserved. > For info, please visit https://www.isc.org/software/dhcp/ > > Listening on LPF/br0/00:02:b3:29:31:eb > Sending on LPF/br0/00:02:b3:29:31:eb > Sending on Socket/fallback > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 5 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 12 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 10 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 18 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 2 > No DHCPOFFERS received. > No working leases in persistent database - sleeping. > done. > Cleaning up temporary files.... > Setting console screen modes and fonts. > cannot (un)set powersave mode > ^[[9;30]^[[14;30][ 93.937149] fuse init (API version 7.13) > Setting sensors limits. > INIT: Entering runlevel: 2 > Using makefile-style concurrent boot in runlevel 2. > udevd-work[481]: kernel-provided name 'evtchn' and NAME= 'xen/evtchn' disagree, please use SYMLINK+= or change the kernel to provide the proper name > > [ 94.359169] Event-channel device installed. > Starting enhanced syslogd: rsyslogd. > [ 95.122279] alloc irq_desc for 500 on node 0 > [ 95.122816] alloc kstat_irqs on node 0 > [ 95.123433] alloc irq_desc for 499 on node 0 > [ 95.123932] alloc kstat_irqs on node 0 > [ 95.126221] XENBUS: Unable to read cpu state > Starting ACPI services.... > Starting anac(h)ronistic cron: anacron. > Starting deferred execution scheduler: atd. > Starting periodic command scheduler: cron. > Starting system message bus: dbus. > Starting kerneloops: > Starting mail-transfer-agent: nullmailer. > Starting Xen daemons: xenfs xenstored xenconsoled xend. > Starting auto Xen domains: hamilton[ 104.719747] alloc irq_desc for 498 on node 0 > [ 104.720022] alloc kstat_irqs on node 0 > [ 105.453372] alloc irq_desc for 497 on node 0 > [ 105.453909] alloc kstat_irqs on node 0 > [ 105.535899] device vif1.0 entered promiscuous mode > [ 105.555070] br0: port 3(vif1.0) entering learning state > [ 107.190073] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) > [ 107.190644] alloc irq_desc for 496 on node 0 > [ 107.191141] alloc kstat_irqs on node 0 > [ 107.210062] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) > [ 107.210607] alloc irq_desc for 495 on node 0 > [ 107.211104] alloc kstat_irqs on node 0 > [ 107.250723] alloc irq_desc for 494 on node 0 > [ 107.251226] alloc kstat_irqs on node 0 > poisson[ 113.363323] alloc irq_desc for 493 on node 0 > [ 113.363860] alloc kstat_irqs on node 0 > [ 114.256144] device vif2.0 entered promiscuous mode > [ 114.273273] br0: port 4(vif2.0) entering learning state > [ 114.401420] alloc irq_desc for 492 on node 0 > [ 114.401956] alloc kstat_irqs on node 0 > [ 115.093754] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) > [ 115.094334] alloc irq_desc for 491 on node 0 > [ 115.094832] alloc kstat_irqs on node 0 > [ 115.112689] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) > [ 115.113236] alloc irq_desc for 490 on node 0 > [ 115.113733] alloc kstat_irqs on node 0 > [ 115.158579] alloc irq_desc for 489 on node 0 > [ 115.159081] alloc kstat_irqs on node 0 > [ 116.184011] vif1.0: no IPv6 routers present > stokes[ 120.552156] br0: port 3(vif1.0) entering forwarding state > [ 121.222354] alloc irq_desc for 488 on node 0 > [ 121.222890] alloc kstat_irqs on node 0 > [ 122.663290] device vif3.0 entered promiscuous mode > [ 122.935537] br0: port 5(vif3.0) entering learning state > [ 123.101861] alloc irq_desc for 487 on node 0 > [ 123.102398] alloc kstat_irqs on node 0 > [ 124.115613] blkback: ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) > [ 124.116222] alloc irq_desc for 486 on node 0 > [ 124.116720] alloc kstat_irqs on node 0 > [ 124.135739] blkback: ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) > [ 124.136320] alloc irq_desc for 485 on node 0 > [ 124.136846] alloc kstat_irqs on node 0 > [ 124.153937] blkback: ring-ref 10, event-channel 10, protocol 2 (x86_32-abi) > [ 124.154485] alloc irq_desc for 484 on node 0 > [ 124.154982] alloc kstat_irqs on node 0 > [ 124.270923] alloc irq_desc for 483 on node 0 > [ 124.271462] alloc kstat_irqs on node 0 > [ 124.386590] vif2.0: no IPv6 routers present > [done]. > [ 129.272012] br0: port 4(vif2.0) entering forwarding state > [ 133.636010] vif3.0: no IPv6 routers present > [ 137.932012] br0: port 5(vif3.0) entering forwarding state > > Here I start the domU that is supposed to use the PCI device: > > [ 169.841776] alloc irq_desc for 482 on node 0 > [ 169.842312] alloc kstat_irqs on node 0 > [ 171.345662] device vif4.0 entered promiscuous mode > [ 171.358478] br0: port 6(vif4.0) entering learning state > [ 171.666476] pciback: vpci: 0000:00:02.7: assign to virtual slot 0 > [ 171.795253] alloc irq_desc for 481 on node 0 > [ 171.795791] alloc kstat_irqs on node 0 > [ 173.956696] alloc irq_desc for 480 on node 0 > [ 173.957231] alloc kstat_irqs on node 0 > [ 174.310130] alloc irq_desc for 479 on node 0 > [ 174.310666] alloc kstat_irqs on node 0 > [ 174.329246] blkback: ring-ref 770, event-channel 10, protocol 2 (x86_32-abi) > [ 174.329798] alloc irq_desc for 478 on node 0 > [ 174.330296] alloc kstat_irqs on node 0 > [ 174.382985] blkback: ring-ref 771, event-channel 11, protocol 2 (x86_32-abi) > [ 174.384144] alloc irq_desc for 477 on node 0 > [ 174.384662] alloc kstat_irqs on node 0 > [ 174.408827] blkback: ring-ref 772, event-channel 12, protocol 2 (x86_32-abi) > [ 174.409379] alloc irq_desc for 476 on node 0 > [ 174.409876] alloc kstat_irqs on node 0 > [ 181.812029] vif4.0: no IPv6 routers present > [ 186.356264] br0: port 6(vif4.0) entering forwarding state > > Apparently the pciback does something. > > Boot log for the domU: > > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 08:48:09 UTC 2010 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] released 0 pages of unused memory > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 000000001c800000 (usable) > [ 0.000000] DMI not present or invalid. > [ 0.000000] last_pfn = 0x1c800 max_arch_pfn = 0x1000000 > [ 0.000000] initial memory mapped : 0 - 033ff000 > [ 0.000000] init_memory_mapping: 0000000000000000-000000001c800000 > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] 0000000000 - 001c800000 page 4k > [ 0.000000] kernel direct mapping tables up to 1c800000 @ 100000-1e9000 > [ 0.000000] RAMDISK: 01655000 - 02980000 > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 456MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 1c800000 > [ 0.000000] low ram: 0 - 1c800000 > [ 0.000000] node 0 low ram: 00000000 - 1c800000 > [ 0.000000] node 0 bootmap 00002000 - 00005900 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001c800000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [00029f5000 - 0002a0d000] XEN PAGETABLES ==> [00029f5000 - 0002a0d000] > [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] > [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] > [ 0.000000] #4 [0001000000 - 000152fb34] TEXT DATA BSS ==> [0001000000 - 000152fb34] > [ 0.000000] #5 [0001655000 - 0002980000] RAMDISK ==> [0001655000 - 0002980000] > [ 0.000000] #6 [0002980000 - 00029f5000] XEN START INFO ==> [0002980000 - 00029f5000] > [ 0.000000] #7 [0000100000 - 00001cd000] PGTABLE ==> [0000100000 - 00001cd000] > [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x0001c800 > [ 0.000000] HighMem 0x0001c800 -> 0x0001c800 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x000000a0 > [ 0.000000] 0: 0x00000100 -> 0x0001c800 > [ 0.000000] On node 0 totalpages: 116640 > [ 0.000000] free_area_init_node: node 0, pgdat c13eea80, node_mem_map c2a0d000 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 > [ 0.000000] Normal zone: 880 pages used for memmap > [ 0.000000] Normal zone: 111760 pages, LIFO batch:31 > [ 0.000000] Using APIC driver default > [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" > [ 0.000000] APIC: disable apic facility > [ 0.000000] nr_irqs_gsi: 16 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 1c800000 (gap: 1c800000:e3800000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.0.0 (preserve-AD) > [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2da1000 s37496 r0 d23944 u65536 > [ 0.000000] pcpu-alloc: s37496 r0 d23944 u65536 alloc=16*4096 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] trying to map vcpu_info 0 at c2da2010, mfn 29041, offset 16 > [ 0.000000] cpu 0 using vcpu_info at c2da2010 > [ 0.000000] Xen: using vcpu_info placement > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 115728 > [ 0.000000] Kernel command line: root=/dev/xvda ro iommu=soft swiotlb=force > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] DMA: Placing 64MB software IO TLB between c2e13000 - c6e13000 > [ 0.000000] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 > [ 0.000000] xen_swiotlb_fixup: buf=c2e13000 size=67108864 > [ 0.000000] xen_swiotlb_fixup: buf=c6e73000 size=32768 > [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) > [ 0.000000] Memory: 369840k/466944k available (2619k kernel code, 96424k reserved, 1446k data, 400k init, 0k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB) > [ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB) > [ 0.000000] vmalloc : 0xdd000000 - 0xf4ffe000 ( 383 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xdc800000 ( 456 MB) > [ 0.000000] .init : 0xc13f9000 - 0xc145d000 ( 400 kB) > [ 0.000000] .data : 0xc128ee8d - 0xc13f8790 (1446 kB) > [ 0.000000] .text : 0xc1000000 - 0xc128ee8d (2619 kB) > [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:1536 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 1800.063 MHz processor. > [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.12 BogoMIPS (lpj=7200252) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] Mount-cache hash table entries: 512 > [ 0.004000] Initializing cgroup subsys ns > [ 0.004000] Initializing cgroup subsys cpuacct > [ 0.004000] Initializing cgroup subsys devices > [ 0.004000] Initializing cgroup subsys freezer > [ 0.004000] Initializing cgroup subsys net_cls > [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [ 0.004000] CPU: L2 Cache: 128K (64 bytes/line) > [ 0.004000] Performance Events: AMD PMU driver. > [ 0.004000] ... version: 0 > [ 0.004000] ... bit width: 48 > [ 0.004000] ... generic registers: 4 > [ 0.004000] ... value mask: 0000ffffffffffff > [ 0.004000] ... max period: 00007fffffffffff > [ 0.004000] ... fixed-purpose events: 0 > [ 0.004000] ... event mask: 000000000000000f > [ 0.004000] SMP alternatives: switching to UP code > [ 0.012688] Freeing SMP alternatives: 14k freed > [ 0.013059] Brought up 1 CPUs > [ 0.013084] CPU0 attaching NULL sched-domain. > [ 0.013277] devtmpfs: initialized > [ 0.014044] Grant table initialized > [ 0.014058] regulator: core version 0.5 > [ 0.014148] NET: Registered protocol family 16 > [ 0.016725] PCI: setting up Xen PCI frontend stub > [ 0.017626] bio: create slab <bio-0> at 0 > [ 0.017736] ACPI: Interpreter disabled. > [ 0.024075] xen_balloon: Initialising balloon driver with page order 0. > [ 0.024145] vgaarb: loaded > [ 0.024275] PCI: System does not support PCI > [ 0.028001] PCI: System does not support PCI > [ 0.028099] Switching to clocksource xen > [ 0.030486] pnp: PnP ACPI: disabled > [ 0.030528] PnPBIOS: Disabled > [ 0.030955] NET: Registered protocol family 2 > [ 0.031966] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.032787] TCP established hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.032928] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.033035] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.033047] TCP reno registered > [ 0.033185] NET: Registered protocol family 1 > [ 0.033279] Unpacking initramfs... > [ 0.077224] Freeing initrd memory: 19628k freed > [ 0.091372] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.091397] DMA: Placing 64MB software IO TLB between c2e13000 - c6e13000 > [ 0.091408] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 > [ 0.091516] platform rtc_cmos: registered platform RTC device (no PNP device found) > [ 0.091780] audit: initializing netlink socket (disabled) > [ 0.091804] type=2000 audit(1275685176.668:1): initialized > [ 0.092860] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.095217] VFS: Disk quotas dquot_6.5.2 > [ 0.095316] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.095445] msgmni has been set to 761 > [ 0.095771] alg: No test for stdrng (krng) > [ 0.095878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 0.095890] io scheduler noop registered > [ 0.095898] io scheduler anticipatory registered > [ 0.095906] io scheduler deadline registered > [ 0.096083] io scheduler cfq registered (default) > [ 0.112222] pcifront pci-0: Installing PCI frontend > [ 0.112335] pcifront pci-0: Creating PCI Frontend Bus 0000:00 > [ 0.116512] isapnp: ISA Plug & Play support disabled > [ 0.123844] registering netback > [ 0.126404] Linux agpgart interface v0.103 > [ 0.126563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.126966] PNP: No PS/2 controller found. Probing ports directly. > [ 0.127795] i8042.c: No controller found. > [ 0.127869] mice: PS/2 mouse device common for all mice > [ 0.128147] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 0.128245] cpuidle: using governor ladder > [ 0.128253] cpuidle: using governor menu > [ 0.128264] No iBFT detected. > [ 0.128701] TCP cubic registered > [ 0.228093] NET: Registered protocol family 10 > [ 0.228699] lo: Disabled Privacy Extensions > [ 0.229113] Mobile IPv6 > [ 0.229136] NET: Registered protocol family 17 > [ 0.229193] Using IPI No-Shortcut mode > [ 0.229353] PM: Resume from disk failed. > [ 0.229365] registered taskstats version 1 > [ 0.229426] XENBUS: Device with no driver: device/vbd/51712 > [ 0.229455] XENBUS: Device with no driver: device/vbd/51728 > [ 0.229480] XENBUS: Device with no driver: device/vbd/51744 > [ 0.229488] XENBUS: Device with no driver: device/vif/0 > [ 0.229497] XENBUS: Device with no driver: device/console/0 > [ 0.229529] /build/buildd-linux-2.6_2.6.32-15-i386-fb7Hfg/linux-2.6-2.6.32/debian/build/source_i386_xen/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > [ 0.229571] Initalizing network drop monitor service > [ 0.229645] Freeing unused kernel memory: 400k freed > [ 0.233197] Write protecting the kernel text: 2620k > [ 0.233595] Write protecting the kernel read-only data: 964k > [ 0.287600] udev: starting version 154 > [ 0.404841] Initialising Xen virtual ethernet driver. > [ 0.527189] blkfront: xvda: barriers enabled > [ 0.530347] xvda: unknown partition table > [ 0.604426] blkfront: xvdc: barriers enabled > [ 0.607760] xvdc: unknown partition table > [ 0.629003] blkfront: xvdb: barriers enabled > [ 0.632120] xvdb: unknown partition table > [ 0.685270] Setting capacity to 579076096 > [ 0.685294] xvdc: detected capacity change from 0 to 296486961152 > [ 0.840610] PM: Starting manual resume from disk > [ 0.840629] PM: Resume from partition 202:16 > [ 0.840633] PM: Checking hibernation image. > [ 0.841455] PM: Error -22 checking image file > [ 0.841460] PM: Resume from disk failed. > [ 0.901114] kjournald starting. Commit interval 5 seconds > [ 0.901148] EXT3-fs: mounted filesystem with ordered data mode. > [ 2.311864] udev: starting version 154 > [ 3.063457] input: PC Speaker as /devices/platform/pcspkr/input/input0 > [ 3.113060] Error: Driver 'pcspkr' is already registered, aborting... > [ 3.399478] Adding 655352k swap on /dev/xvdb. Priority:-1 extents:1 across:655352k SS > [ 3.583101] EXT3 FS on xvda, internal journal > [ 977.287888] kjournald starting. Commit interval 5 seconds > [ 977.295032] EXT3 FS on xvdc, internal journal > [ 977.295054] EXT3-fs: mounted filesystem with ordered data mode. > [ 979.065859] RPC: Registered udp transport module. > [ 979.065877] RPC: Registered tcp transport module. > [ 979.065885] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 979.169060] Slow work thread pool: Starting up > [ 979.169160] Slow work thread pool: Ready > [ 979.169252] FS-Cache: Loaded > [ 979.264207] FS-Cache: Netfs 'nfs' registered for caching > [ 979.320718] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > [ 979.816552] fuse init (API version 7.13) > [ 980.445821] svc: failed to register lockdv1 RPC service (errno 97). > [ 980.448618] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > [ 980.490135] NFSD: starting 90-second grace period > [ 989.240036] eth0: no IPv6 routers present > > But lspci doesn't show anything and /sys/bus/pci/devices/ is empty. > > > Regards, > Thomas ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-06-14 10:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20100528211856.GA4530@dirichlet.schwinge.homeip.net>
[not found] ` <20100529123246.GT17817@reaktio.net>
2010-06-04 22:42 ` [Pkg-xen-devel] Problems with PCI pass-through Thomas Schwinge
2010-06-07 15:13 ` Konrad Rzeszutek Wilk
2010-06-08 15:08 ` Konrad Rzeszutek Wilk
2010-06-14 10:04 ` Thomas Schwinge
2010-06-09 14:55 ` Pasi Kärkkäinen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).