* Slow boot with 2.6.37-rc4 @ 2010-11-30 23:59 M A Young 2010-12-01 8:31 ` Jeremy Fitzhardinge 2010-12-01 15:17 ` Konrad Rzeszutek Wilk 0 siblings, 2 replies; 13+ messages in thread From: M A Young @ 2010-11-30 23:59 UTC (permalink / raw) To: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 536 bytes --] I have been testing 2.6.37 kernels as a xen dom0 both with and without patches from xen/next-2.6.37 and I get a long pause with a blank screen before anthing seems to happen. I am attaching the kernel boot log. There seem to be a few pauses, the first is followed by [ 37.619375] ata1.00: qc timeout (cmd 0x27) [ 37.619393] ata1.00: failed to read native max address (err_mask=0x4) [ 37.619400] ata1.00: HPA support seems broken, skipping HPA handling I don't have this problem booting such kernels natively. Michael Young [-- Attachment #2: dmesg output --] [-- Type: TEXT/PLAIN, Size: 80163 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-0.rc4.git0.1.fc15.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.5.1 20101130 (Red Hat 4.5.1-6) (GCC) ) #1 SMP Tue Nov 30 21:40:46 UTC 2010 [ 0.000000] Command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 [ 0.000000] xen_release_chunk: looking at area pfn e0000-f423c: 82492 pages freed [ 0.000000] released 82492 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] Xen: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] Xen: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000120000000 - 000000013423c000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17 10/27/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 05fff000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000 [ 0.000000] 0000000000 - 00df66d000 page 4k [ 0.000000] kernel direct mapping tables up to df66d000 @ 58fe000-5fff000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013423c000 [ 0.000000] 0100000000 - 013423c000 page 4k [ 0.000000] kernel direct mapping tables up to 13423c000 @ decc5000-df66d000 [ 0.000000] RAMDISK: 02ac8000 - 04e86000 [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000df67e000 00040 [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013423c000 [ 0.000000] Initmem setup node 0 0000000000000000-000000013423c000 [ 0.000000] NODE_DATA [00000000df658800 - 00000000df66d7ff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013423c [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00120000 -> 0x0013423c [ 0.000000] On node 0 totalpages: 997432 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31 [ 0.000000] Normal zone: 2920 pages used for memmap [ 0.000000] Normal zone: 79572 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 [ 0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000120000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800dee80000 s1920512 r8192 d20992 u1949696 [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u1949696 alloc=476*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 980170 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff8800d6a00000 - ffff8800daa00000 [ 0.000000] software IO TLB at phys 0xd6a00000 - 0xdaa00000 [ 0.000000] Memory: 3453540k/5048560k available (4852k kernel code, 1058832k absent, 536188k reserved, 6792k data, 2744k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2394.088 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.17 BogoMIPS (lpj=2394088) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.002020] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004771] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005919] Mount-cache hash table entries: 256 [ 0.007764] Initializing cgroup subsys ns [ 0.007783] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.007796] Initializing cgroup subsys cpuacct [ 0.007828] Initializing cgroup subsys memory [ 0.007962] Initializing cgroup subsys devices [ 0.007971] Initializing cgroup subsys freezer [ 0.007979] Initializing cgroup subsys net_cls [ 0.007986] Initializing cgroup subsys blkio [ 0.008248] CPU: Physical Processor ID: 0 [ 0.008254] CPU: Processor Core ID: 0 [ 0.008262] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.008995] ACPI: Core revision 20101013 [ 0.038047] ftrace: allocating 24654 entries in 97 pages [ 0.043194] NMI watchdog failed to create perf event on cpu0: fffffffffffffffe [ 0.043975] installing Xen timer for CPU 1 [ 0.044088] lockdep: fixing up alternatives. [ 0.044459] NMI watchdog failed to create perf event on cpu1: fffffffffffffffe [ 0.044470] Brought up 2 CPUs [ 0.044474] sizeof(vma)=184 bytes [ 0.044477] sizeof(page)=56 bytes [ 0.044479] sizeof(inode)=1088 bytes [ 0.044482] sizeof(dentry)=264 bytes [ 0.044484] sizeof(ext3inode)=1552 bytes [ 0.044486] sizeof(ext4inode)=1912 bytes [ 0.044489] sizeof(buffer_head)=104 bytes [ 0.044491] sizeof(skbuff)=240 bytes [ 0.044493] sizeof(task_struct)=9104 bytes [ 0.045487] devtmpfs: initialized [ 0.054703] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.054741] Grant table initialized [ 0.054789] Time: 22:53:12 Date: 11/30/10 [ 0.055033] NET: Registered protocol family 16 [ 0.057295] ACPI: bus type pci registered [ 0.057976] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.057987] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.071540] PCI: Using configuration type 1 for base access [ 0.085234] bio: create slab <bio-0> at 0 [ 0.089407] ACPI: EC: Look up EC in DSDT [ 0.108187] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.109999] ACPI: Dynamic OEM Table Load: [ 0.109999] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.110304] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.110999] ACPI: Dynamic OEM Table Load: [ 0.110999] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.111119] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.112999] ACPI: Dynamic OEM Table Load: [ 0.112999] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.113061] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.114999] ACPI: Dynamic OEM Table Load: [ 0.114999] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.115999] ACPI: Interpreter enabled [ 0.115999] ACPI: (supports S0 S3 S4 S5) [ 0.115999] ACPI: Using IOAPIC for interrupt routing [ 0.250999] ACPI: No dock devices found. [ 0.250999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.274999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.322999] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.322999] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.322999] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.322999] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.323102] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.323183] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.323230] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.323262] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.323506] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.323574] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.323999] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.323999] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.324056] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.324246] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.324454] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.324532] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.324847] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.324861] pci 0000:00:1a.7: PME# disabled [ 0.324963] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.324999] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.325030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.325044] pci 0000:00:1b.0: PME# disabled [ 0.325146] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.325451] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.325464] pci 0000:00:1c.0: PME# disabled [ 0.325576] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.325880] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.325893] pci 0000:00:1c.1: PME# disabled [ 0.326043] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.326348] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.326361] pci 0000:00:1c.4: PME# disabled [ 0.326477] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.326666] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.326819] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.326999] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.327055] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.327244] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.327446] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.327524] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.327839] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.327853] pci 0000:00:1d.7: PME# disabled [ 0.327935] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.328102] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.328429] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.328445] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.328459] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.328473] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.328487] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.328645] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.328698] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.328735] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.328773] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.328810] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.328848] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.328999] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.328999] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.328999] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.328999] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.328999] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.328999] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.328999] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.329041] pci 0000:00:1f.2: PME# supported from D3hot [ 0.329055] pci 0000:00:1f.2: PME# disabled [ 0.329132] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.329186] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.329326] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.329747] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 [ 0.329830] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.329874] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] [ 0.330034] pci 0000:09:00.0: supports D1 D2 [ 0.330037] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.330052] pci 0000:09:00.0: PME# disabled [ 0.330276] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.330293] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.330307] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.330330] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.330698] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280 [ 0.330869] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] [ 0.331070] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.331094] pci 0000:0b:00.0: PME# disabled [ 0.331402] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.331419] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.331433] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.331456] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.331669] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.331686] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.331699] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.331722] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.331942] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00 [ 0.331991] pci 0000:02:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.331999] pci 0000:02:09.0: MMC cards are now supported by standard SDHCI controller [ 0.331999] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff] [ 0.332030] pci 0000:02:09.0: supports D1 D2 [ 0.332034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332085] pci 0000:02:09.0: PME# disabled [ 0.332159] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805 [ 0.332228] pci 0000:02:09.1: reg 10: [mem 0xfe3ff400-0xfe3ff4ff] [ 0.332528] pci 0000:02:09.1: supports D1 D2 [ 0.332531] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332546] pci 0000:02:09.1: PME# disabled [ 0.332640] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880 [ 0.332709] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff] [ 0.332999] pci 0000:02:09.2: supports D1 D2 [ 0.332999] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332999] pci 0000:02:09.2: PME# disabled [ 0.332999] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880 [ 0.332999] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff] [ 0.333031] pci 0000:02:09.3: supports D1 D2 [ 0.333034] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333050] pci 0000:02:09.3: PME# disabled [ 0.333243] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.333262] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.333275] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.333299] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.333304] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.333309] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.333313] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.333318] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.333322] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.333330] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.333335] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.333349] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.333354] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.333359] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.333363] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.333368] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.333373] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.333471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.337999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.337999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.338581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.338999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.365695] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.365999] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.366584] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.367245] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.367999] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.368583] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.369411] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.369999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.369999] HEST: Table is not found! [ 0.369999] xen_balloon: Initialising balloon driver. [ 0.370099] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.372979] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.372999] vgaarb: loaded [ 0.373831] SCSI subsystem initialized [ 0.374212] libata version 3.00 loaded. [ 0.374731] usbcore: registered new interface driver usbfs [ 0.374865] usbcore: registered new interface driver hub [ 0.375107] usbcore: registered new device driver usb [ 0.375500] PCI: Using ACPI for IRQ routing [ 0.375500] PCI: pci_cache_line_size set to 64 bytes [ 0.375841] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.375857] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.375864] reserve RAM buffer: 000000013423c000 - 0000000137ffffff [ 0.376947] NetLabel: Initializing [ 0.376953] NetLabel: domain hash size = 128 [ 0.376958] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.376999] NetLabel: unlabeled traffic allowed by default [ 0.377999] Switching to clocksource xen [ 0.499093] pnp: PnP ACPI init [ 0.499268] ACPI: bus type pnp registered [ 0.551045] pnp 00:00: [bus 00-ff] [ 0.551045] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.551045] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.562100] pnp 00:00: [io 0x0d00-0xffff window] [ 0.562105] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.562109] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.562113] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.562117] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.562122] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.562126] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.562130] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.562134] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.562138] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.562142] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.562147] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.562812] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.562912] pnp 00:01: [io 0x004e-0x004f] [ 0.562917] pnp 00:01: [io 0x0068-0x006f] [ 0.562921] pnp 00:01: [mem 0xff800000-0xff8fffff] [ 0.562925] pnp 00:01: [mem 0xffc00000-0xffcfffff] [ 0.563386] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.563528] xen: registering gsi 12 triggering 1 polarity 0 [ 0.563534] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.563541] xen: --> irq=12 [ 0.563556] pnp 00:02: [irq 12] [ 0.563831] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.563969] pnp 00:03: [io 0x0060] [ 0.563973] pnp 00:03: [io 0x0064] [ 0.563977] pnp 00:03: [io 0x0062] [ 0.563981] pnp 00:03: [io 0x0066] [ 0.563984] xen: registering gsi 1 triggering 1 polarity 0 [ 0.563988] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.563995] xen: --> irq=1 [ 0.564028] pnp 00:03: [irq 1] [ 0.564308] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.564454] pnp 00:04: [io 0x0070-0x0071] [ 0.564457] xen: registering gsi 8 triggering 1 polarity 0 [ 0.564461] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.564468] xen: --> irq=8 [ 0.564476] pnp 00:04: [irq 8] [ 0.564489] pnp 00:04: [io 0x0072-0x0077] [ 0.564754] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.564927] pnp 00:05: [io 0x0061] [ 0.564931] pnp 00:05: [io 0x0063] [ 0.564935] pnp 00:05: [io 0x0065] [ 0.564939] pnp 00:05: [io 0x0067] [ 0.565225] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.565369] pnp 00:06: [io 0x0c80-0x0cff] [ 0.565877] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.566073] pnp 00:07: [dma 4] [ 0.566078] pnp 00:07: [io 0x0000-0x000f] [ 0.566082] pnp 00:07: [io 0x0080-0x0085] [ 0.566086] pnp 00:07: [io 0x0087-0x008f] [ 0.566090] pnp 00:07: [io 0x00c0-0x00df] [ 0.566093] pnp 00:07: [io 0x0010-0x001f] [ 0.566097] pnp 00:07: [io 0x0090-0x0091] [ 0.566101] pnp 00:07: [io 0x0093-0x009f] [ 0.566387] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.566529] pnp 00:08: [io 0x00f0-0x00ff] [ 0.566532] xen: registering gsi 13 triggering 1 polarity 0 [ 0.566536] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.566544] xen: --> irq=13 [ 0.566552] pnp 00:08: [irq 13] [ 0.566849] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.567012] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.567695] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.569011] pnp 00:0a: [io 0x0900-0x097f] [ 0.569011] pnp 00:0a: [io 0x0092] [ 0.569011] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.569011] pnp 00:0a: [io 0x0020-0x0021] [ 0.569011] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.569011] pnp 00:0a: [irq 0 disabled] [ 0.569011] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.569646] pnp 00:0a: [io 0x1000-0x1005] [ 0.569650] pnp 00:0a: [io 0x1008-0x100f] [ 0.569799] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.569811] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.570534] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.570677] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.570682] pnp 00:0b: [io 0x0086] [ 0.570685] pnp 00:0b: [io 0x1006-0x1007] [ 0.570689] pnp 00:0b: [io 0x100a-0x1059] [ 0.570693] pnp 00:0b: [io 0x1060-0x107f] [ 0.570697] pnp 00:0b: [io 0x1080-0x10bf] [ 0.570701] pnp 00:0b: [io 0x10c0-0x10df] [ 0.570705] pnp 00:0b: [io 0x1010-0x102f] [ 0.570708] pnp 00:0b: [io 0x0809] [ 0.570857] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.570868] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.570878] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.570889] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.571514] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.616012] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.616012] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.616012] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.616012] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.616012] pnp 00:0c: [mem 0x00100000-0xdf66d7ff] [ 0.616012] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff] [ 0.616012] pnp 00:0c: [mem 0xdf700000-0xdf7fffff] [ 0.616012] pnp 00:0c: [mem 0xdf700000-0xdfefffff] [ 0.616012] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.616012] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.616012] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.616012] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.616012] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.653785] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.653790] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.653794] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.653798] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.653802] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.653806] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.654659] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.655011] pnp: PnP ACPI: found 13 devices [ 0.655011] ACPI: ACPI bus type pnp unregistered [ 0.655406] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.655418] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.655471] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.655512] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.655562] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.655574] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.655612] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.655623] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.655634] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.655645] system 00:0b: [io 0x0809] has been reserved [ 0.655707] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.655725] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.655742] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.655759] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.655776] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.655788] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.655799] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.655815] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.655827] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.655838] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.655855] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.655866] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.655877] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.655888] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.655899] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.655910] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.655921] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.655932] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.655943] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.681446] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.681833] pci 0000:00:1c.0: BAR 15: assigned [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.681859] pci 0000:00:1c.1: BAR 15: assigned [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.681873] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff] [ 0.681883] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.681896] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.681917] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.681935] pci 0000:00:1c.0: bridge window [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.681964] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.681975] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.681997] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.682010] pci 0000:00:1c.1: bridge window [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.682010] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.682010] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.682010] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.682010] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.682010] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.682010] pci 0000:00:1e.0: bridge window [io disabled] [ 0.682010] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.682010] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.682010] xen: registering gsi 16 triggering 0 polarity 1 [ 0.682261] xen: --> irq=16 [ 0.682270] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.682291] pci 0000:00:1c.0: setting latency timer to 64 [ 0.682317] xen: registering gsi 17 triggering 0 polarity 1 [ 0.682340] xen: --> irq=17 [ 0.682346] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.682364] pci 0000:00:1c.1: setting latency timer to 64 [ 0.682390] xen: registering gsi 16 triggering 0 polarity 1 [ 0.682394] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 0.682400] xen: --> irq=16 [ 0.682403] Already setup the GSI :16 [ 0.682409] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.682427] pci 0000:00:1c.4: setting latency timer to 64 [ 0.682456] pci 0000:00:1e.0: setting latency timer to 64 [ 0.682465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.682469] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.682472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.682475] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.682479] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.682482] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.682485] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.682489] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.682492] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.682495] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.682499] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.682502] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.682505] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.682509] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.682512] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.682516] pci_bus 0000:09: resource 2 [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.682519] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.682523] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.682526] pci_bus 0000:0b: resource 2 [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.682530] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 0.682533] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff] [ 0.682536] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.682540] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.682543] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.682546] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.682549] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.682553] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] [ 0.682556] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.682559] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.682563] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.682566] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.682569] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.682573] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.682576] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.682579] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.682583] pci_bus 0000:02: resource 16 [mem 0x120000000-0x317ffffff] [ 0.682852] NET: Registered protocol family 2 [ 0.683787] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.688572] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.694312] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 0.699010] TCP: Hash tables configured (established 524288 bind 65536) [ 0.699010] TCP reno registered [ 0.702548] UDP hash table entries: 2048 (order: 6, 393216 bytes) [ 0.703524] UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes) [ 0.704899] NET: Registered protocol family 1 [ 0.705003] pci 0000:00:02.0: Boot video device [ 0.705779] PCI: CLS 64 bytes, default 64 [ 0.706535] Trying to unpack rootfs image as initramfs... [ 1.098030] Freeing initrd memory: 36600k freed [ 1.204143] DMA-API: preallocated 32768 debug entries [ 1.204158] DMA-API: debugging enabled by kernel config [ 1.204403] Simple Boot Flag at 0x79 set to 0x1 [ 1.208308] audit: initializing netlink socket (disabled) [ 1.208399] type=2000 audit(1291157593.556:1): initialized [ 1.224184] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.252038] VFS: Disk quotas dquot_6.5.2 [ 1.252602] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.258463] msgmni has been set to 6816 [ 1.259336] SELinux: Registering netfilter hooks [ 1.261317] cryptomgr_test used greatest stack depth: 5448 bytes left [ 1.262173] alg: No test for stdrng (krng) [ 1.262540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.262584] io scheduler noop registered [ 1.262591] io scheduler deadline registered [ 1.263035] io scheduler cfq registered (default) [ 1.263043] list_sort_test: start testing list_sort() [ 1.267753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.268030] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.268030] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.271639] acpiphp: Slot [1] registered [ 1.272143] pci-stub: invalid id string "" [ 1.274340] ACPI: AC Adapter [AC] (on-line) [ 1.275330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.276471] ACPI: Lid Switch [LID] [ 1.276877] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.276939] ACPI: Power Button [PBTN] [ 1.277371] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.277393] ACPI: Sleep Button [SBTN] [ 1.278036] ACPI: acpi_idle registered with cpuidle [ 1.281735] Marking TSC unstable due to TSC halts in idle [ 1.306033] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.306033] ACPI: Thermal Zone [THM] (51 C) [ 1.306033] ERST: Table is not found! [ 1.386680] hpet_acpi_add: no address or irqs in _CRS [ 1.387196] Non-volatile memory driver v1.3 [ 1.387203] Linux agpgart interface v0.103 [ 1.388075] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.388075] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.390793] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.397012] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.398033] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.407430] ACPI: Battery Slot [BAT0] (battery present) [ 1.425287] brd: module loaded [ 1.432136] loop: module loaded [ 1.433109] ahci 0000:00:1f.2: version 3.0 [ 1.433147] xen: registering gsi 17 triggering 0 polarity 1 [ 1.433165] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.433172] xen: --> irq=17 [ 1.433178] Already setup the GSI :17 [ 1.433185] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.433656] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.433667] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.433686] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.440305] scsi0 : ahci [ 1.441641] scsi1 : ahci [ 1.442359] scsi2 : ahci [ 1.443315] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 499 [ 1.443315] ata2: DUMMY [ 1.443315] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 499 [ 1.444806] ata_piix 0000:00:1f.1: version 2.13 [ 1.444834] xen: registering gsi 16 triggering 0 polarity 1 [ 1.444838] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.444846] xen: --> irq=16 [ 1.444850] Already setup the GSI :16 [ 1.444856] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.445117] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.448769] scsi3 : ata_piix [ 1.449470] scsi4 : ata_piix [ 1.450426] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.450426] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.453668] ata5: port disabled. ignoring. [ 1.454155] Fixed MDIO Bus: probed [ 1.454905] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.454994] xen: registering gsi 22 triggering 0 polarity 1 [ 1.455047] xen: --> irq=22 [ 1.455055] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.455140] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.455149] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.456308] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.456695] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.460611] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.460730] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.470063] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.470384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.470392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.470401] usb usb1: Product: EHCI Host Controller [ 1.470407] usb usb1: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 ehci_hcd [ 1.470415] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.471908] hub 1-0:1.0: USB hub found [ 1.472006] hub 1-0:1.0: 4 ports detected [ 1.473119] xen: registering gsi 20 triggering 0 polarity 1 [ 1.473143] xen: --> irq=20 [ 1.473150] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.473222] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.473231] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.473692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.473995] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.474765] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.478083] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.487055] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.487242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.487251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.487259] usb usb2: Product: EHCI Host Controller [ 1.487265] usb usb2: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 ehci_hcd [ 1.487273] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.488276] hub 2-0:1.0: USB hub found [ 1.488332] hub 2-0:1.0: 6 ports detected [ 1.489279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.489434] uhci_hcd: USB Universal Host Controller Interface driver [ 1.489746] xen: registering gsi 20 triggering 0 polarity 1 [ 1.489750] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.489757] xen: --> irq=20 [ 1.489761] Already setup the GSI :20 [ 1.489767] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.489825] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.489833] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.490307] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.490526] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.490881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.490889] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.490897] usb usb3: Product: UHCI Host Controller [ 1.490903] usb usb3: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.490911] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.491887] hub 3-0:1.0: USB hub found [ 1.491944] hub 3-0:1.0: 2 ports detected [ 1.492807] xen: registering gsi 21 triggering 0 polarity 1 [ 1.492832] xen: --> irq=21 [ 1.492838] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.492876] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.492884] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.493312] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.493605] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.493917] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.493926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.493934] usb usb4: Product: UHCI Host Controller [ 1.493940] usb usb4: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.493948] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.494874] hub 4-0:1.0: USB hub found [ 1.494929] hub 4-0:1.0: 2 ports detected [ 1.495787] xen: registering gsi 20 triggering 0 polarity 1 [ 1.495791] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.495799] xen: --> irq=20 [ 1.495802] Already setup the GSI :20 [ 1.495808] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.495846] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.495854] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.496346] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.496557] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.496864] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.496873] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.496880] usb usb5: Product: UHCI Host Controller [ 1.496886] usb usb5: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.496894] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.497935] hub 5-0:1.0: USB hub found [ 1.497991] hub 5-0:1.0: 2 ports detected [ 1.498949] xen: registering gsi 21 triggering 0 polarity 1 [ 1.498954] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 1.498961] xen: --> irq=21 [ 1.498964] Already setup the GSI :21 [ 1.498970] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.499008] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.499017] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.499461] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.499671] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.500012] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.500021] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500029] usb usb6: Product: UHCI Host Controller [ 1.500035] usb usb6: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.500043] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.500984] hub 6-0:1.0: USB hub found [ 1.501061] hub 6-0:1.0: 2 ports detected [ 1.501872] xen: registering gsi 22 triggering 0 polarity 1 [ 1.501877] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 1.501884] xen: --> irq=22 [ 1.501887] Already setup the GSI :22 [ 1.501894] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.501931] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.501939] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.502426] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.502647] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.502958] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.502967] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.502975] usb usb7: Product: UHCI Host Controller [ 1.502981] usb usb7: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.502989] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.503901] hub 7-0:1.0: USB hub found [ 1.503956] hub 7-0:1.0: 2 ports detected [ 1.505226] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.506012] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.506012] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.506012] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.530135] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.530163] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.530190] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.530726] mice: PS/2 mouse device common for all mice [ 1.532395] rtc_cmos 00:04: RTC can wake from S4 [ 1.533070] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.533182] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.534370] device-mapper: uevent: version 1.0.3 [ 1.535636] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 1.537455] cpuidle: using governor ladder [ 1.539077] cpuidle: using governor menu [ 1.541056] usbcore: registered new interface driver usbhid [ 1.541064] usbhid: USB HID core driver [ 1.541376] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.545681] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.545788] TCP cubic registered [ 1.545795] Initializing XFRM netlink socket [ 1.545860] NET: Registered protocol family 17 [ 1.545993] Registering the dns_resolver key type [ 1.547157] PM: Hibernation image not present or could not be loaded. [ 1.547298] registered taskstats version 1 [ 1.547800] IMA: No TPM chip found, activating TPM-bypass! [ 1.550181] Magic number: 2:959:907 [ 1.550422] rtc_cmos 00:04: setting system clock to 2010-11-30 22:53:14 UTC (1291157594) [ 1.550714] Initalizing network drop monitor service [ 1.555900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.623612] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 [ 1.629410] ata4.00: configured for UDMA/33 [ 1.717720] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4 [ 1.725660] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5 [ 1.749226] ata3: SATA link down (SStatus 0 SControl 300) [ 1.774214] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.893897] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 1.893906] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.893913] usb 1-1: Product: Laptop Integrated Webcam [ 1.893920] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 2.167182] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.255161] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.422225] usb 6-2: New USB device found, idVendor=046d, idProduct=c517 [ 2.422234] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.422241] usb 6-2: Product: USB Receiver [ 2.422247] usb 6-2: Manufacturer: Logitech [ 2.441649] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 [ 2.442964] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 [ 2.472259] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.473509] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7 [ 2.475218] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 [ 37.619375] ata1.00: qc timeout (cmd 0x27) [ 37.619393] ata1.00: failed to read native max address (err_mask=0x4) [ 37.619400] ata1.00: HPA support seems broken, skipping HPA handling [ 37.619646] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 37.620037] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 37.620457] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 37.773188] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 37.900873] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 37.900882] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 37.900889] usb 7-2: Product: BCM2045B2 [ 37.900894] usb 7-2: Manufacturer: Broadcom [ 37.903157] hub 7-2:1.0: USB hub found [ 37.904886] hub 7-2:1.0: 3 ports detected [ 37.929590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 37.930707] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 [ 37.930724] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 37.945754] ata1.00: configured for UDMA/100 [ 37.947017] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 [ 37.948763] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 37.949340] sd 0:0:0:0: [sda] Write Protect is off [ 37.949348] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.949566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.950042] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 37.956736] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 [ 37.973765] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.973778] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 37.974824] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 37.975409] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 38.181561] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 38.293537] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 38.293546] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 38.293554] usb 7-2.1: Product: BCM2045 [ 38.293559] usb 7-2.1: Manufacturer: Broadcom Corp [ 38.364523] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 38.408101] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 38.412301] sd 0:0:0:0: [sda] Attached SCSI disk [ 38.413058] Freeing unused kernel memory: 2744k freed [ 38.413058] Write protecting the kernel read-only data: 10240k [ 38.429773] Freeing unused kernel memory: 1272k freed [ 38.432738] Freeing unused kernel memory: 1616k freed [ 38.462731] mount used greatest stack depth: 5248 bytes left [ 38.483453] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 38.483464] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 38.483472] usb 7-2.2: Manufacturer: Broadcom Corp [ 38.493481] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 [ 38.494240] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 38.519051] dracut: dracut-006-5.fc14 [ 38.561464] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 38.584816] udev[84]: starting version 161 [ 102.990135] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 102.990278] ehci_hcd 0000:00:1d.7: PME# enabled [ 103.031952] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 103.031963] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 103.031972] usb 7-2.3: Manufacturer: Broadcom Corp [ 103.046154] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 [ 103.047619] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 103.264239] [drm] Initialized drm 1.1.0 20060810 [ 103.296156] xen: registering gsi 16 triggering 0 polarity 1 [ 103.296163] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 103.296174] xen: --> irq=16 [ 103.296180] Already setup the GSI :16 [ 103.296188] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 103.296205] i915 0000:00:02.0: setting latency timer to 64 [ 103.604741] [drm] MTRR allocation failed. Graphics performance may suffer. [ 103.667059] composite sync not supported [ 103.837121] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 103.837579] [drm] initialized overlay support [ 103.837838] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 103.850322] composite sync not supported [ 103.860272] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 103.934631] fbcon: inteldrmfb (fb0) is primary device [ 103.936682] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 103.954189] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 103.954193] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 103.959622] Console: switching to colour frame buffer device 160x50 [ 103.962539] fb0: inteldrmfb frame buffer device [ 103.962562] drm: registered panic notifier [ 112.372107] acpi device:30: registered as cooling_device2 [ 112.375624] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10 [ 112.376368] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 112.376650] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 112.377892] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 112.380851] modprobe used greatest stack depth: 3632 bytes left [ 112.450411] dracut: Starting plymouth daemon [ 112.496023] composite sync not supported [ 113.237324] xen: registering gsi 16 triggering 0 polarity 1 [ 113.237330] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 113.237366] xen: --> irq=16 [ 113.237371] Already setup the GSI :16 [ 113.237392] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 113.258417] sdhci: Secure Digital Host Controller Interface driver [ 113.258463] sdhci: Copyright(c) Pierre Ossman [ 113.290915] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 113.334261] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 113.334349] xen: registering gsi 18 triggering 0 polarity 1 [ 113.334382] xen: --> irq=18 [ 113.334393] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 127.208985] firewire_core: created device fw0: GUID 444fc00012d94c70, S400 [ 127.269586] Registered led device: mmc0:: [ 127.305322] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 128.552357] dracut: Scanning devices sda7 for LVM volume groups [ 128.836765] dracut: Reading all physical volumes. This may take a while... [ 128.839075] dracut: Found volume group "vg0" using metadata type lvm2 [ 140.413729] dracut: 7 logical volume(s) in volume group "vg0" now active [ 140.515812] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 140.609550] dracut: Remounting /dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro [ 140.643168] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 140.672763] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b [ 140.889831] dracut: Loading SELinux policy [ 141.498714] SELinux: 2048 avtab hash slots, 210512 rules. [ 141.793253] SELinux: 2048 avtab hash slots, 210512 rules. [ 143.122112] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats [ 143.122120] SELinux: 77 classes, 210512 rules [ 143.150481] SELinux: Permission read_policy in class security not defined in policy. [ 143.151016] SELinux: the above unknown classes and permissions will be allowed [ 143.151016] SELinux: Completing initialization. [ 143.151016] SELinux: Setting up existing superblocks. [ 143.151016] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 143.151016] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 143.151016] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 143.151016] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 143.151016] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 143.151016] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 143.151016] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 143.151016] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 143.151016] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 143.151016] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 143.151016] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 143.187637] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 143.193303] SELinux: initialized (dev dm-8, type ext4), uses xattr [ 143.229935] type=1403 audit(1291157736.178:2): policy loaded auid=4294967295 ses=4294967295 [ 144.119744] dracut: Switching root [ 145.712925] readahead-collector: starting [ 148.221752] udev[407]: starting version 161 [ 149.117286] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 150.316218] Linux video capture interface: v2.00 [ 150.449061] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 150.451907] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 150.456348] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11 [ 150.459058] usbcore: registered new interface driver uvcvideo [ 150.460016] USB Video Class driver (v1.0.0) [ 150.539418] wmi: Mapper loaded [ 151.645033] cfg80211: Calling CRDA to update world regulatory domain [ 151.673885] sky2: driver version 1.28 [ 151.676426] xen: registering gsi 16 triggering 0 polarity 1 [ 151.676432] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 151.677118] xen: --> irq=16 [ 151.678205] Already setup the GSI :16 [ 151.679148] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 151.681881] sky2 0000:09:00.0: setting latency timer to 64 [ 151.682033] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 151.689756] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6 [ 151.891847] audit: name_count maxed, losing inode data: dev=00:07, inode=10478 [ 151.891915] audit: name_count maxed, losing inode data: dev=00:07, inode=10478 [ 151.891968] audit: name_count maxed, losing inode data: dev=00:07, inode=10478 [ 151.892365] audit: name_count maxed, losing inode data: dev=00:07, inode=10470 [ 151.892392] audit: name_count maxed, losing inode data: dev=00:07, inode=10483 [ 151.892419] audit: name_count maxed, losing inode data: dev=00:07, inode=10483 [ 151.892470] audit: name_count maxed, losing inode data: dev=00:07, inode=10483 [ 151.892497] audit: name_count maxed, losing inode data: dev=00:07, inode=10483 [ 151.892805] audit: name_count maxed, losing inode data: dev=00:07, inode=10470 [ 151.892832] audit: name_count maxed, losing inode data: dev=00:07, inode=10488 [ 151.892866] audit: name_count maxed, losing inode data: dev=00:07, inode=10488 [ 151.892903] audit: name_count maxed, losing inode data: dev=00:07, inode=10488 [ 151.892930] audit: name_count maxed, losing inode data: dev=00:07, inode=10488 [ 151.892958] audit: name_count maxed, losing inode data: dev=00:07, inode=10470 [ 151.892985] audit: name_count maxed, losing inode data: dev=00:07, inode=10493 [ 151.893334] audit: name_count maxed, losing inode data: dev=00:07, inode=10493 [ 151.893418] audit: name_count maxed, losing inode data: dev=00:07, inode=10493 [ 151.893445] audit: name_count maxed, losing inode data: dev=00:07, inode=10493 [ 151.893483] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 151.893512] audit: name_count maxed, losing inode data: dev=00:07, inode=10498 [ 151.893937] audit: name_count maxed, losing inode data: dev=00:07, inode=10498 [ 151.893967] audit: name_count maxed, losing inode data: dev=00:07, inode=10498 [ 151.893994] audit: name_count maxed, losing inode data: dev=00:07, inode=10501 [ 151.894321] audit: name_count maxed, losing inode data: dev=00:07, inode=10501 [ 151.894368] audit: name_count maxed, losing inode data: dev=00:07, inode=10501 [ 151.894395] audit: name_count maxed, losing inode data: dev=00:07, inode=10501 [ 151.894424] audit: name_count maxed, losing inode data: dev=00:07, inode=10498 [ 151.894450] audit: name_count maxed, losing inode data: dev=00:07, inode=10506 [ 151.894477] audit: name_count maxed, losing inode data: dev=00:07, inode=10506 [ 151.894515] audit: name_count maxed, losing inode data: dev=00:07, inode=10506 [ 151.894831] audit: name_count maxed, losing inode data: dev=00:07, inode=10506 [ 151.894862] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 151.894891] audit: name_count maxed, losing inode data: dev=00:07, inode=10511 [ 151.894917] audit: name_count maxed, losing inode data: dev=00:07, inode=10511 [ 151.894944] audit: name_count maxed, losing inode data: dev=00:07, inode=10511 [ 151.894970] audit: name_count maxed, losing inode data: dev=00:07, inode=10514 [ 151.894997] audit: name_count maxed, losing inode data: dev=00:07, inode=10514 [ 151.895010] audit: name_count maxed, losing inode data: dev=00:07, inode=10514 [ 151.895371] audit: name_count maxed, losing inode data: dev=00:07, inode=10514 [ 151.895401] audit: name_count maxed, losing inode data: dev=00:07, inode=10511 [ 151.895427] audit: name_count maxed, losing inode data: dev=00:07, inode=10519 [ 151.895453] audit: name_count maxed, losing inode data: dev=00:07, inode=10519 [ 151.895496] audit: name_count maxed, losing inode data: dev=00:07, inode=10519 [ 151.895522] audit: name_count maxed, losing inode data: dev=00:07, inode=10519 [ 151.896856] audit: name_count maxed, losing inode data: dev=00:07, inode=10511 [ 151.896885] audit: name_count maxed, losing inode data: dev=00:07, inode=10524 [ 151.896912] audit: name_count maxed, losing inode data: dev=00:07, inode=10524 [ 151.896949] audit: name_count maxed, losing inode data: dev=00:07, inode=10524 [ 151.896976] audit: name_count maxed, losing inode data: dev=00:07, inode=10524 [ 152.016151] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 152.017030] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 152.020271] xen: registering gsi 17 triggering 0 polarity 1 [ 152.020276] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 152.020562] xen: --> irq=17 [ 152.021934] Already setup the GSI :17 [ 152.022918] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 152.022918] iwlagn 0000:0b:00.0: setting latency timer to 64 [ 152.025535] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 152.070897] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 152.072607] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 153.806379] iTCO_vendor_support: vendor-support=0 [ 153.917424] input: Dell WMI hotkeys as /devices/virtual/input/input12 [ 154.089012] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 154.092942] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 154.095484] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 154.134373] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 [ 154.948397] Bluetooth: Core ver 2.15 [ 154.950071] NET: Registered protocol family 31 [ 154.951038] Bluetooth: HCI device and connection manager initialized [ 154.951038] Bluetooth: HCI socket layer initialized [ 155.138822] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 155.146361] usbcore: registered new interface driver btusb [ 155.178557] xen: registering gsi 18 triggering 0 polarity 1 [ 155.178563] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 155.180013] xen: --> irq=18 [ 155.180157] Already setup the GSI :18 [ 155.181122] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 155.184118] r852: driver loaded succesfully [ 155.472186] xen: registering gsi 21 triggering 0 polarity 1 [ 155.472192] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 155.473013] xen: --> irq=21 [ 155.473738] Already setup the GSI :21 [ 155.474715] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 155.478888] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 155.811377] cfg80211: World regulatory domain updated: [ 155.812015] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 155.812015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 155.812015] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 155.812015] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 155.812015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 155.812015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.360168] cfg80211: Calling CRDA for country: GB [ 157.483688] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 157.726233] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 157.727150] ehci_hcd 0000:00:1a.7: PME# enabled [ 159.687993] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 159.688000] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 159.688005] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) [ 159.688009] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 [ 159.688014] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0 [ 159.688014] ALSA sound/pci/hda/hda_codec.c:4632: inputs: [ 159.688014] ALSA sound/pci/hda/hda_codec.c:4638: [ 159.688568] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) [ 159.844502] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 159.847271] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 159.852265] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 159.858175] audit: name_count maxed, losing inode data: dev=00:05, inode=11518 [ 159.858872] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.859002] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.859767] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.859824] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.860276] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.860330] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.861521] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.861652] audit: name_count maxed, losing inode data: dev=00:05, inode=10352 [ 159.862787] xen: registering gsi 17 triggering 0 polarity 1 [ 159.862792] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 159.863031] xen: --> irq=17 [ 159.864189] Already setup the GSI :17 [ 159.865174] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 159.932204] cfg80211: Regulatory domain changed to country: GB [ 159.933012] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 159.933012] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 159.933012] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 159.933012] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 159.933012] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 162.078523] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 162.130255] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 162.131699] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 162.133722] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 165.903967] ip used greatest stack depth: 3488 bytes left [ 166.753625] SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts [ 166.824497] Event-channel device installed. [ 169.934013] EXT4-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended [ 169.938683] EXT4-fs (dm-8): re-mounted. Opts: (null) [ 171.805154] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 174.980037] dmeventd (1026): /proc/1026/oom_adj is deprecated, please use /proc/1026/oom_score_adj instead. [ 176.404559] NET: Registered protocol family 10 [ 176.424442] lo: Disabled Privacy Extensions [ 176.459686] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 185.892147] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xfed1c400-0xfed1c7ff] (PCI address [0xfed1c400-0xfed1c7ff]) [ 185.893038] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x307) [ 185.893038] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [ 185.907539] ehci_hcd 0000:00:1a.7: PME# disabled [ 185.907539] xen: registering gsi 22 triggering 0 polarity 1 [ 185.907539] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 185.907539] xen: --> irq=22 [ 185.909200] Already setup the GSI :22 [ 185.910187] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 185.910187] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 187.703239] Bluetooth: L2CAP ver 2.15 [ 187.704012] Bluetooth: L2CAP socket layer initialized [ 187.775139] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 187.776061] Bluetooth: BNEP filters: protocol multicast [ 187.890197] Bluetooth: SCO (Voice Link) ver 0.6 [ 187.891012] Bluetooth: SCO socket layer initialized [ 188.081551] Bluetooth: RFCOMM TTY layer initialized [ 188.083077] Bluetooth: RFCOMM socket layer initialized [ 188.084011] Bluetooth: RFCOMM ver 1.11 [ 189.321827] sky2 0000:09:00.0: eth0: enabling interface [ 189.335418] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 189.684986] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 190.712958] btusb_intr_complete: hci0 urb ffff8800c84df000 failed to resubmit (1) [ 190.715965] btusb_bulk_complete: hci0 urb ffff8800c84df108 failed to resubmit (1) [ 190.718954] btusb_bulk_complete: hci0 urb ffff8800c84df210 failed to resubmit (1) [ 191.722084] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 191.723014] ehci_hcd 0000:00:1a.7: PME# enabled [ 193.102622] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 193.460145] XENBUS: Unable to read cpu state [ 193.466520] XENBUS: Unable to read cpu state [ 195.641752] Bridge firewalling registered [ 199.210872] Ebtables v2.0 registered [ 200.080893] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.086863] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 200.148010] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.176460] lo: Disabled Privacy Extensions [ 200.180386] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 234.718199] readahead-collector: sorting [ 235.037077] readahead-collector: finished [-- Attachment #3: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-11-30 23:59 Slow boot with 2.6.37-rc4 M A Young @ 2010-12-01 8:31 ` Jeremy Fitzhardinge 2010-12-01 20:15 ` M A Young 2010-12-01 15:17 ` Konrad Rzeszutek Wilk 1 sibling, 1 reply; 13+ messages in thread From: Jeremy Fitzhardinge @ 2010-12-01 8:31 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On 11/30/2010 03:59 PM, M A Young wrote: > I have been testing 2.6.37 kernels as a xen dom0 both with and without > patches from xen/next-2.6.37 and I get a long pause with a blank > screen before anthing seems to happen. I am attaching the kernel boot > log. There seem to be a few pauses, the first is followed by > > [ 37.619375] ata1.00: qc timeout (cmd 0x27) > [ 37.619393] ata1.00: failed to read native max address (err_mask=0x4) > [ 37.619400] ata1.00: HPA support seems broken, skipping HPA handling That's your primary HDD? Does it work properly once it gets past this? What kind of controller is it attached to? What does /proc/interrupts look like? Thanks, J ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-01 8:31 ` Jeremy Fitzhardinge @ 2010-12-01 20:15 ` M A Young 0 siblings, 0 replies; 13+ messages in thread From: M A Young @ 2010-12-01 20:15 UTC (permalink / raw) To: Jeremy Fitzhardinge; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 910 bytes --] On Wed, 1 Dec 2010, Jeremy Fitzhardinge wrote: > On 11/30/2010 03:59 PM, M A Young wrote: >> I have been testing 2.6.37 kernels as a xen dom0 both with and without >> patches from xen/next-2.6.37 and I get a long pause with a blank >> screen before anthing seems to happen. I am attaching the kernel boot >> log. There seem to be a few pauses, the first is followed by >> >> [ 37.619375] ata1.00: qc timeout (cmd 0x27) >> [ 37.619393] ata1.00: failed to read native max address (err_mask=0x4) >> [ 37.619400] ata1.00: HPA support seems broken, skipping HPA handling > > That's your primary HDD? Yes > Does it work properly once it gets past this? Yes (it crashes on shutdown but I haven't tried the latest xen patches yet). > What kind of controller is it attached to? What does /proc/interrupts > look like? I have attached the contents of /proc/interrupts with and without xen. Michael Young [-- Attachment #2: Type: TEXT/PLAIN, Size: 1748 bytes --] CPU0 CPU1 0: 33176 39994 IO-APIC-edge timer 1: 879 882 IO-APIC-edge i8042 8: 0 1 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 61 59 IO-APIC-edge i8042 14: 3811 3580 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 16 10 IO-APIC-fasteoi firewire_ohci 18: 0 0 IO-APIC-fasteoi mmc0, r852 20: 0 3 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb5 21: 28081 1547 IO-APIC-fasteoi uhci_hcd:usb4, uhci_hcd:usb6 22: 177 163 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7 40: 32422 20087 PCI-MSI-edge ahci 41: 42359 47426 PCI-MSI-edge i915 42: 0 1 PCI-MSI-edge sky2@pci:0000:09:00.0 43: 205 210 PCI-MSI-edge hda_intel 44: 41454 5529 PCI-MSI-edge iwlagn NMI: 151 126 Non-maskable interrupts LOC: 183945 168246 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 151 126 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RES: 4684 7597 Rescheduling interrupts CAL: 1579 1978 Function call interrupts TLB: 897 733 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 6 6 Machine check polls ERR: 1 MIS: 0 [-- Attachment #3: Type: TEXT/PLAIN, Size: 2516 bytes --] CPU0 CPU1 1: 33 0 xen-pirq-ioapic-edge i8042 8: 0 0 xen-pirq-ioapic-edge rtc0 9: 0 0 xen-pirq-ioapic-level acpi 12: 130 0 xen-pirq-ioapic-edge i8042 14: 157 0 xen-pirq-ioapic-edge ata_piix 15: 0 0 xen-pirq-ioapic-edge ata_piix 16: 3 0 xen-pirq-ioapic-level firewire_ohci 18: 0 0 xen-pirq-ioapic-level mmc0, r852 20: 3 0 xen-pirq-ioapic-level ehci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb5 21: 94 0 xen-pirq-ioapic-level uhci_hcd:usb4, uhci_hcd:usb6 22: 336 0 xen-pirq-ioapic-level ehci_hcd:usb1, uhci_hcd:usb7 493: 0 0 xen-dyn-event evtchn:xenstored 494: 119 0 xen-dyn-event evtchn:xenstored 495: 216 0 xen-pirq-msi hda_intel 496: 117 331 xen-pirq-msi iwlagn 497: 1 0 xen-pirq-msi sky2@pci:0000:09:00.0 498: 5856 0 xen-pirq-msi i915 499: 8589 0 xen-pirq-msi ahci 501: 91 0 xen-dyn-event xenbus 502: 0 5562 xen-percpu-ipi callfuncsingle1 503: 0 0 xen-percpu-virq debug1 504: 0 0 xen-percpu-ipi callfunc1 505: 0 2206 xen-percpu-ipi resched1 506: 0 24909 xen-percpu-virq timer1 507: 1134 0 xen-percpu-ipi callfuncsingle0 508: 0 0 xen-percpu-virq debug0 509: 0 0 xen-percpu-ipi callfunc0 510: 2033 0 xen-percpu-ipi resched0 511: 23050 0 xen-percpu-virq timer0 NMI: 0 0 Non-maskable interrupts LOC: 0 0 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 0 0 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RES: 2033 2206 Rescheduling interrupts CAL: 1134 5562 Function call interrupts TLB: 0 0 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 0 0 Machine check polls ERR: 0 MIS: 0 [-- Attachment #4: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-11-30 23:59 Slow boot with 2.6.37-rc4 M A Young 2010-12-01 8:31 ` Jeremy Fitzhardinge @ 2010-12-01 15:17 ` Konrad Rzeszutek Wilk 2010-12-01 19:15 ` M A Young 1 sibling, 1 reply; 13+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-12-01 15:17 UTC (permalink / raw) To: M A Young; +Cc: xen-devel > [ 1.433109] ahci 0000:00:1f.2: version 3.0 > [ 1.433147] xen: registering gsi 17 triggering 0 polarity 1 > [ 1.433165] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 1.433172] xen: --> irq=17 > [ 1.433178] Already setup the GSI :17 > [ 1.433185] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 1.433656] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode > [ 1.433667] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems > [ 1.433686] ahci 0000:00:1f.2: setting latency timer to 64 > [ 1.440305] scsi0 : ahci > [ 1.441641] scsi1 : ahci > [ 1.442359] scsi2 : ahci > [ 1.443315] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 499 ^^^ > [ 1.443315] ata2: DUMMY > [ 1.443315] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 499 ^^^^-??? That looks odd. Wonder what on baremetal it says? ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-01 15:17 ` Konrad Rzeszutek Wilk @ 2010-12-01 19:15 ` M A Young 2010-12-03 20:06 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 13+ messages in thread From: M A Young @ 2010-12-01 19:15 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 660 bytes --] On Wed, 1 Dec 2010, Konrad Rzeszutek Wilk wrote: >> [ 1.443315] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 499 > ^^^ >> [ 1.443315] ata2: DUMMY >> [ 1.443315] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 499 > ^^^^-??? > > That looks odd. Wonder what on baremetal it says? [ 1.558411] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40 [ 1.558414] ata2: DUMMY [ 1.558417] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 40 This is with the same kernel but without xen. The full log is attached. Michael Young [-- Attachment #2: Type: TEXT/PLAIN, Size: 74966 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-0.rc4.git0.1.fc15.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.5.1 20101130 (Red Hat 4.5.1-6) (GCC) ) #1 SMP Tue Nov 30 21:40:46 UTC 2010 [ 0.000000] Command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 rhgb quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17 10/27/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0DF700000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 5, base: 3575MB, range: 1MB, type UC [ 0.000000] total RAM covered: 7671M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3575MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000 [ 0.000000] 0000000000 - 00df600000 page 2M [ 0.000000] 00df600000 - 00df66d000 page 4k [ 0.000000] kernel direct mapping tables up to df66d000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ df667000-df66d000 [ 0.000000] RAMDISK: 372e1000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000df67e000 00040 [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011ffeb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1046012 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 [ 0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800df000000 s1920512 r8192 d20992 u2097152 [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029878 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4014048k/4718592k available (4852k kernel code, 534544k absent, 170000k reserved, 6792k data, 2744k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.335 MHz processor. [ 0.001031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.67 BogoMIPS (lpj=2394335) [ 0.001036] pid_max: default: 32768 minimum: 301 [ 0.001202] Security Framework initialized [ 0.001210] SELinux: Initializing. [ 0.001288] SELinux: Starting in permissive mode [ 0.002597] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005214] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006420] Mount-cache hash table entries: 256 [ 0.008049] Initializing cgroup subsys ns [ 0.008060] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008064] Initializing cgroup subsys cpuacct [ 0.008082] Initializing cgroup subsys memory [ 0.008204] Initializing cgroup subsys devices [ 0.008208] Initializing cgroup subsys freezer [ 0.008212] Initializing cgroup subsys net_cls [ 0.008215] Initializing cgroup subsys blkio [ 0.008397] CPU: Physical Processor ID: 0 [ 0.008400] CPU: Processor Core ID: 0 [ 0.008403] mce: CPU supports 6 MCE banks [ 0.008413] CPU0: Thermal monitoring enabled (TM2) [ 0.008422] using mwait in idle threads. [ 0.008425] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.008438] ... version: 2 [ 0.008440] ... bit width: 40 [ 0.008441] ... generic registers: 2 [ 0.008444] ... value mask: 000000ffffffffff [ 0.008446] ... max period: 000000007fffffff [ 0.008448] ... fixed-purpose events: 3 [ 0.008449] ... event mask: 0000000700000003 [ 0.008977] ACPI: Core revision 20101013 [ 0.037027] ftrace: allocating 24654 entries in 97 pages [ 0.039252] Setting APIC routing to flat [ 0.039764] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049776] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.052184] NMI watchdog enabled, takes one hw-pmu counter. [ 0.052876] lockdep: fixing up alternatives. [ 0.053189] Booting Node 0, Processors #1 Ok. [ 0.125147] NMI watchdog enabled, takes one hw-pmu counter. [ 0.125277] Brought up 2 CPUs [ 0.125280] Total of 2 processors activated (9576.41 BogoMIPS). [ 0.126017] sizeof(vma)=184 bytes [ 0.126019] sizeof(page)=56 bytes [ 0.126021] sizeof(inode)=1088 bytes [ 0.126023] sizeof(dentry)=264 bytes [ 0.126024] sizeof(ext3inode)=1552 bytes [ 0.126026] sizeof(ext4inode)=1912 bytes [ 0.126028] sizeof(buffer_head)=104 bytes [ 0.126029] sizeof(skbuff)=240 bytes [ 0.126031] sizeof(task_struct)=9104 bytes [ 0.127039] devtmpfs: initialized [ 0.134474] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.134506] Time: 18:58:27 Date: 12/01/10 [ 0.134820] NET: Registered protocol family 16 [ 0.136138] ACPI: bus type pci registered [ 0.136531] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.136535] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.164443] PCI: Using configuration type 1 for base access [ 0.174246] bio: create slab <bio-0> at 0 [ 0.183291] ACPI: EC: Look up EC in DSDT [ 0.220220] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.222421] ACPI: Dynamic OEM Table Load: [ 0.222425] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.223556] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.225606] ACPI: Dynamic OEM Table Load: [ 0.225610] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.227784] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.229917] ACPI: Dynamic OEM Table Load: [ 0.229921] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.230826] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.232913] ACPI: Dynamic OEM Table Load: [ 0.232917] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.234559] ACPI: Interpreter enabled [ 0.234562] ACPI: (supports S0 S3 S4 S5) [ 0.234706] ACPI: Using IOAPIC for interrupt routing [ 0.356987] ACPI: No dock devices found. [ 0.356992] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.404788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.503442] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.503445] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.503448] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.503451] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.503454] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.503456] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.503459] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.503462] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.503464] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.503467] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.503470] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.503472] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.503475] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.503555] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.503713] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.503745] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.503765] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.503778] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.503900] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.503928] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.504136] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.504230] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.504312] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.504406] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.504514] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.504553] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.504709] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.504718] pci 0000:00:1a.7: PME# disabled [ 0.504773] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.504809] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.504955] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.504963] pci 0000:00:1b.0: PME# disabled [ 0.505023] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.505174] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.505181] pci 0000:00:1c.0: PME# disabled [ 0.505241] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.505391] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.505398] pci 0000:00:1c.1: PME# disabled [ 0.505480] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.505630] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.505637] pci 0000:00:1c.4: PME# disabled [ 0.505698] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.505791] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.505873] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.505966] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.506064] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.506158] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.506263] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.506302] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.506457] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.506465] pci 0000:00:1d.7: PME# disabled [ 0.506511] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.506668] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.506843] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.506850] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.506855] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.506861] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.506867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.506959] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.506986] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.507018] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.507037] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.507056] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.507076] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.507177] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.507221] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.507240] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.507259] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.507278] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.507297] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.507317] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.507402] pci 0000:00:1f.2: PME# supported from D3hot [ 0.507409] pci 0000:00:1f.2: PME# disabled [ 0.507453] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.507480] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.507549] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.507777] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 [ 0.507826] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.507852] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] [ 0.508036] pci 0000:09:00.0: supports D1 D2 [ 0.508039] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.508048] pci 0000:09:00.0: PME# disabled [ 0.508196] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.508203] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.508211] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.508223] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.508471] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280 [ 0.508601] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] [ 0.509166] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.509185] pci 0000:0b:00.0: PME# disabled [ 0.511094] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.511102] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.511110] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.511122] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.511230] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.511237] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.511244] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.511257] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.511373] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00 [ 0.511398] pci 0000:02:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.511401] pci 0000:02:09.0: MMC cards are now supported by standard SDHCI controller [ 0.511426] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff] [ 0.511576] pci 0000:02:09.0: supports D1 D2 [ 0.511578] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.511622] pci 0000:02:09.0: PME# disabled [ 0.511665] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805 [ 0.511701] pci 0000:02:09.1: reg 10: [mem 0xfe3ff400-0xfe3ff4ff] [ 0.511850] pci 0000:02:09.1: supports D1 D2 [ 0.511852] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.511861] pci 0000:02:09.1: PME# disabled [ 0.511920] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880 [ 0.511956] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff] [ 0.512117] pci 0000:02:09.2: supports D1 D2 [ 0.512120] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512128] pci 0000:02:09.2: PME# disabled [ 0.512172] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880 [ 0.512207] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff] [ 0.512358] pci 0000:02:09.3: supports D1 D2 [ 0.512360] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512368] pci 0000:02:09.3: PME# disabled [ 0.512466] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.512474] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.512481] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.512494] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.512498] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.512503] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.512515] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.512518] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.512522] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.512526] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.512529] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.512533] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.512536] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.512540] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.512543] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.512547] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.512551] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.512603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.516480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.517639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.518171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.518747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.614941] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.615524] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.616101] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.616542] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.617118] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.617682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.618258] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.618701] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.618906] HEST: Table is not found! [ 0.619498] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.619608] vgaarb: loaded [ 0.620249] SCSI subsystem initialized [ 0.620347] libata version 3.00 loaded. [ 0.620549] usbcore: registered new interface driver usbfs [ 0.620630] usbcore: registered new interface driver hub [ 0.621080] usbcore: registered new device driver usb [ 0.621331] PCI: Using ACPI for IRQ routing [ 0.621331] PCI: pci_cache_line_size set to 64 bytes [ 0.622153] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.622165] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.622960] NetLabel: Initializing [ 0.622963] NetLabel: domain hash size = 128 [ 0.622964] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.623102] NetLabel: unlabeled traffic allowed by default [ 0.623610] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.623620] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.623625] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.626200] Switching to clocksource tsc [ 0.694371] pnp: PnP ACPI init [ 0.694480] ACPI: bus type pnp registered [ 0.740837] pnp 00:00: [bus 00-ff] [ 0.740841] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.740845] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.740848] pnp 00:00: [io 0x0d00-0xffff window] [ 0.740851] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.740854] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.740857] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.740861] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.740864] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.740867] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.740870] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.740873] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.740885] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.740888] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.740891] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.741246] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.741306] pnp 00:01: [io 0x004e-0x004f] [ 0.741310] pnp 00:01: [io 0x0068-0x006f] [ 0.741313] pnp 00:01: [mem 0xff800000-0xff8fffff] [ 0.741316] pnp 00:01: [mem 0xffc00000-0xffcfffff] [ 0.741623] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.741732] pnp 00:02: [irq 12] [ 0.741894] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.741990] pnp 00:03: [io 0x0060] [ 0.741993] pnp 00:03: [io 0x0064] [ 0.741996] pnp 00:03: [io 0x0062] [ 0.741999] pnp 00:03: [io 0x0066] [ 0.742011] pnp 00:03: [irq 1] [ 0.742171] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.742265] pnp 00:04: [io 0x0070-0x0071] [ 0.742278] pnp 00:04: [irq 8] [ 0.742280] pnp 00:04: [io 0x0072-0x0077] [ 0.742436] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.742579] pnp 00:05: [io 0x0061] [ 0.742582] pnp 00:05: [io 0x0063] [ 0.742585] pnp 00:05: [io 0x0065] [ 0.742588] pnp 00:05: [io 0x0067] [ 0.742747] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.742839] pnp 00:06: [io 0x0c80-0x0cff] [ 0.743130] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.743238] pnp 00:07: [dma 4] [ 0.743241] pnp 00:07: [io 0x0000-0x000f] [ 0.743244] pnp 00:07: [io 0x0080-0x0085] [ 0.743255] pnp 00:07: [io 0x0087-0x008f] [ 0.743258] pnp 00:07: [io 0x00c0-0x00df] [ 0.743260] pnp 00:07: [io 0x0010-0x001f] [ 0.743263] pnp 00:07: [io 0x0090-0x0091] [ 0.743266] pnp 00:07: [io 0x0093-0x009f] [ 0.743430] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.743532] pnp 00:08: [io 0x00f0-0x00ff] [ 0.743544] pnp 00:08: [irq 13] [ 0.743717] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.743989] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.744301] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.745367] pnp 00:0a: [io 0x0900-0x097f] [ 0.745370] pnp 00:0a: [io 0x0092] [ 0.745373] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.745376] pnp 00:0a: [io 0x0020-0x0021] [ 0.745379] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.745382] pnp 00:0a: [irq 0 disabled] [ 0.745385] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.745387] pnp 00:0a: [io 0x1000-0x1005] [ 0.745390] pnp 00:0a: [io 0x1008-0x100f] [ 0.745474] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.745478] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.745847] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.745938] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.745941] pnp 00:0b: [io 0x0086] [ 0.745944] pnp 00:0b: [io 0x1006-0x1007] [ 0.745947] pnp 00:0b: [io 0x100a-0x1059] [ 0.745950] pnp 00:0b: [io 0x1060-0x107f] [ 0.745953] pnp 00:0b: [io 0x1080-0x10bf] [ 0.745955] pnp 00:0b: [io 0x10c0-0x10df] [ 0.745966] pnp 00:0b: [io 0x1010-0x102f] [ 0.745969] pnp 00:0b: [io 0x0809] [ 0.746053] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.746056] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.746060] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.746063] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.746374] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.809257] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.809261] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.809264] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.809267] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.809270] pnp 00:0c: [mem 0x00100000-0xdf66d7ff] [ 0.809273] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff] [ 0.809276] pnp 00:0c: [mem 0xdf700000-0xdf7fffff] [ 0.809279] pnp 00:0c: [mem 0xdf700000-0xdfefffff] [ 0.809282] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.809285] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.809288] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.809291] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.809293] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.809296] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.809299] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.809302] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.809305] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.809308] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.809311] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.809765] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.810194] pnp: PnP ACPI: found 13 devices [ 0.810197] ACPI: ACPI bus type pnp unregistered [ 0.810235] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.810241] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.810270] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.810292] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.810312] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.810317] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.810348] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.810353] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.810358] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.810363] system 00:0b: [io 0x0809] has been reserved [ 0.810393] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.810402] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.810407] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved [ 0.810412] system 00:0c: [mem 0x000e0000-0x000fffff] has been reserved [ 0.810420] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.810424] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.810437] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.810446] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.810451] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.810456] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.810465] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.810470] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.810475] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.810480] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.810485] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.810490] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.810495] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.810512] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.810517] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.828376] pci 0000:00:1c.0: BAR 15: assigned [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.828394] pci 0000:00:1c.1: BAR 15: assigned [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.828400] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff] [ 0.828405] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.828410] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.828420] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.828427] pci 0000:00:1c.0: bridge window [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.828440] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.828444] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.828454] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.828461] pci 0000:00:1c.1: bridge window [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.828474] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.828478] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.828488] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.828506] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.828519] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.828521] pci 0000:00:1e.0: bridge window [io disabled] [ 0.828530] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.828537] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.828579] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.828588] pci 0000:00:1c.0: setting latency timer to 64 [ 0.828613] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.828620] pci 0000:00:1c.1: setting latency timer to 64 [ 0.828634] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.828641] pci 0000:00:1c.4: setting latency timer to 64 [ 0.828656] pci 0000:00:1e.0: setting latency timer to 64 [ 0.828662] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.828664] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.828667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.828669] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.828672] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.828675] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.828677] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.828680] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.828683] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.828685] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.828688] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.828690] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.828693] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.828696] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.828698] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.828701] pci_bus 0000:09: resource 2 [mem 0x317e00000-0x317ffffff 64bit pref] [ 0.828704] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.828706] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.828709] pci_bus 0000:0b: resource 2 [mem 0x317c00000-0x317dfffff 64bit pref] [ 0.828712] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 0.828714] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff] [ 0.828717] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.828720] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.828722] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.828725] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.828727] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.828730] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] [ 0.828732] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.828735] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.828737] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.828740] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.828742] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.828745] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.828748] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.828750] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.828753] pci_bus 0000:02: resource 16 [mem 0x120000000-0x317ffffff] [ 0.828948] NET: Registered protocol family 2 [ 0.829422] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.832324] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.837448] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 0.842924] TCP: Hash tables configured (established 524288 bind 65536) [ 0.842996] TCP reno registered [ 0.843091] UDP hash table entries: 2048 (order: 6, 393216 bytes) [ 0.843524] UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes) [ 0.844335] NET: Registered protocol family 1 [ 0.844390] pci 0000:00:02.0: Boot video device [ 0.844817] PCI: CLS 64 bytes, default 64 [ 0.845367] Trying to unpack rootfs image as initramfs... [ 1.331787] Freeing initrd memory: 13372k freed [ 1.385863] DMA-API: preallocated 32768 debug entries [ 1.385867] DMA-API: debugging enabled by kernel config [ 1.385873] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.385877] Placing 64MB software IO TLB between ffff8800db000000 - ffff8800df000000 [ 1.385880] software IO TLB at phys 0xdb000000 - 0xdf000000 [ 1.386047] Simple Boot Flag at 0x79 set to 0x1 [ 1.389056] audit: initializing netlink socket (disabled) [ 1.389123] type=2000 audit(1291229908.388:1): initialized [ 1.404268] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.421941] VFS: Disk quotas dquot_6.5.2 [ 1.422270] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.426053] msgmni has been set to 7866 [ 1.426560] SELinux: Registering netfilter hooks [ 1.427790] cryptomgr_test used greatest stack depth: 5752 bytes left [ 1.428157] cryptomgr_test used greatest stack depth: 5688 bytes left [ 1.428234] alg: No test for stdrng (krng) [ 1.428470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.428505] io scheduler noop registered [ 1.428508] io scheduler deadline registered [ 1.428785] io scheduler cfq registered (default) [ 1.428788] list_sort_test: start testing list_sort() [ 1.431834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.432112] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.432114] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.434232] acpiphp: Slot [1] registered [ 1.434519] pci-stub: invalid id string "" [ 1.435455] intel_idle: MWAIT substates: 0x3122220 [ 1.435458] intel_idle: does not run on family 6 model 23 [ 1.436091] ACPI: AC Adapter [AC] (on-line) [ 1.436635] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.437593] ACPI: Lid Switch [LID] [ 1.437850] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.437897] ACPI: Power Button [PBTN] [ 1.438166] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.438177] ACPI: Sleep Button [SBTN] [ 1.439810] ACPI: acpi_idle registered with cpuidle [ 1.440787] Monitor-Mwait will be used to enter C-1 state [ 1.440877] Monitor-Mwait will be used to enter C-2 state [ 1.440958] Monitor-Mwait will be used to enter C-3 state [ 1.440971] Marking TSC unstable due to TSC halts in idle [ 1.441238] Switching to clocksource hpet [ 1.457409] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.457412] ACPI: Thermal Zone [THM] (40 C) [ 1.457483] ERST: Table is not found! [ 1.519106] Non-volatile memory driver v1.3 [ 1.519108] Linux agpgart interface v0.103 [ 1.519613] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.520071] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.521259] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.527765] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.528358] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.535384] ACPI: Battery Slot [BAT0] (battery present) [ 1.545742] brd: module loaded [ 1.549881] loop: module loaded [ 1.550526] ahci 0000:00:1f.2: version 3.0 [ 1.550550] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.550692] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.550863] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.550868] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.550876] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.555770] scsi0 : ahci [ 1.556763] scsi1 : ahci [ 1.557235] scsi2 : ahci [ 1.558411] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40 [ 1.558414] ata2: DUMMY [ 1.558417] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 40 [ 1.558784] ata_piix 0000:00:1f.1: version 2.13 [ 1.558801] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.558934] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.561255] scsi3 : ata_piix [ 1.561678] scsi4 : ata_piix [ 1.564390] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.564393] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.564786] ata5: port disabled. ignoring. [ 1.565087] Fixed MDIO Bus: probed [ 1.565535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.565634] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.565681] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.565686] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.566668] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.566939] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.570839] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.570916] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.580046] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.580284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.580287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.580290] usb usb1: Product: EHCI Host Controller [ 1.580292] usb usb1: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 ehci_hcd [ 1.580294] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.581460] hub 1-0:1.0: USB hub found [ 1.581540] hub 1-0:1.0: 4 ports detected [ 1.582323] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.582361] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.582367] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.582642] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.583165] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.587044] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.587117] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.597039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.597147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.597150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.597152] usb usb2: Product: EHCI Host Controller [ 1.597155] usb usb2: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 ehci_hcd [ 1.597157] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.597773] hub 2-0:1.0: USB hub found [ 1.597804] hub 2-0:1.0: 6 ports detected [ 1.598434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.598515] uhci_hcd: USB Universal Host Controller Interface driver [ 1.598720] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.598741] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.598746] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.599055] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.600117] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.600328] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.600331] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.600333] usb usb3: Product: UHCI Host Controller [ 1.600335] usb usb3: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.600338] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.600917] hub 3-0:1.0: USB hub found [ 1.600951] hub 3-0:1.0: 2 ports detected [ 1.601479] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.601498] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.601503] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.601809] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.601981] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.602183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.602186] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.602189] usb usb4: Product: UHCI Host Controller [ 1.602191] usb usb4: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.602193] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.602740] hub 4-0:1.0: USB hub found [ 1.602770] hub 4-0:1.0: 2 ports detected [ 1.603305] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.603325] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.603330] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.603622] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.603750] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.603929] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.603932] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.603935] usb usb5: Product: UHCI Host Controller [ 1.603937] usb usb5: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.603940] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.604533] hub 5-0:1.0: USB hub found [ 1.604572] hub 5-0:1.0: 2 ports detected [ 1.605074] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.605094] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.605099] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.605363] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.605489] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.605698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.605701] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.605704] usb usb6: Product: UHCI Host Controller [ 1.605706] usb usb6: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.605708] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.606278] hub 6-0:1.0: USB hub found [ 1.606309] hub 6-0:1.0: 2 ports detected [ 1.606846] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.606866] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.606870] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.607152] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.607279] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.607476] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.607479] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.607481] usb usb7: Product: UHCI Host Controller [ 1.607483] usb usb7: Manufacturer: Linux 2.6.37-0.rc4.git0.1.fc15.x86_64 uhci_hcd [ 1.607486] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.608048] hub 7-0:1.0: USB hub found [ 1.608079] hub 7-0:1.0: 2 ports detected [ 1.608786] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.624744] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.634655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.634698] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.634711] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.634723] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.634735] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.635084] mice: PS/2 mouse device common for all mice [ 1.636203] rtc_cmos 00:04: RTC can wake from S4 [ 1.637445] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.637502] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.638291] device-mapper: uevent: version 1.0.3 [ 1.639052] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 1.640403] cpuidle: using governor ladder [ 1.641562] cpuidle: using governor menu [ 1.642873] usbcore: registered new interface driver usbhid [ 1.642876] usbhid: USB HID core driver [ 1.643105] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.645958] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.646060] TCP cubic registered [ 1.646062] Initializing XFRM netlink socket [ 1.646108] NET: Registered protocol family 17 [ 1.646198] Registering the dns_resolver key type [ 1.646945] PM: Hibernation image not present or could not be loaded. [ 1.647034] registered taskstats version 1 [ 1.647315] IMA: No TPM chip found, activating TPM-bypass! [ 1.648789] Magic number: 6:463:998 [ 1.648873] pnp 00:00: hash matches [ 1.649021] rtc_cmos 00:04: setting system clock to 2010-12-01 18:58:28 UTC (1291229908) [ 1.649196] Initalizing network drop monitor service [ 1.660414] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.795418] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 [ 1.817429] ata4.00: configured for UDMA/33 [ 1.896157] ata3: SATA link down (SStatus 0 SControl 300) [ 1.897167] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.017323] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 2.017330] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.017340] usb 1-1: Product: Laptop Integrated Webcam [ 2.017342] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 2.315075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.335150] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4 [ 2.361845] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5 [ 2.410126] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 2.570498] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.570504] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.570510] usb 7-2: Product: BCM2045B2 [ 2.570513] usb 7-2: Manufacturer: Broadcom [ 2.572752] hub 7-2:1.0: USB hub found [ 2.574530] hub 7-2:1.0: 3 ports detected [ 2.698908] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 [ 2.698915] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 2.700097] ata1.00: configured for UDMA/100 [ 2.701112] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 [ 2.702494] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.702779] sd 0:0:0:0: [sda] Write Protect is off [ 2.702782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.702895] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.702899] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.708507] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 [ 2.724252] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.724263] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.725035] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.725394] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.785129] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.798355] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.800944] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.801049] Freeing unused kernel memory: 2744k freed [ 2.802671] Write protecting the kernel read-only data: 10240k [ 2.803499] Freeing unused kernel memory: 1272k freed [ 2.805211] Freeing unused kernel memory: 1616k freed [ 2.811922] mknod used greatest stack depth: 5584 bytes left [ 2.820590] mount used greatest stack depth: 5248 bytes left [ 2.845482] dracut: dracut-006-5.fc14 [ 2.874863] udev[86]: starting version 161 [ 2.949670] usb 6-2: New USB device found, idVendor=046d, idProduct=c517 [ 2.949674] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.949677] usb 6-2: Product: USB Receiver [ 2.949679] usb 6-2: Manufacturer: Logitech [ 2.971367] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 [ 2.972618] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 [ 3.001700] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 3.002750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7 [ 3.007401] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 [ 3.032683] [drm] Initialized drm 1.1.0 20060810 [ 3.068416] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.068425] i915 0000:00:02.0: setting latency timer to 64 [ 3.096455] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 3.213449] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 3.213452] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.213455] usb 7-2.1: Product: BCM2045 [ 3.213457] usb 7-2.1: Manufacturer: Broadcom Corp [ 3.226859] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 3.226864] [drm] MTRR allocation failed. Graphics performance may suffer. [ 3.232761] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 3.283463] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 3.288346] composite sync not supported [ 3.406462] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 3.406465] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.406468] usb 7-2.2: Manufacturer: Broadcom Corp [ 3.421374] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 [ 3.421941] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 3.457458] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.457877] [drm] initialized overlay support [ 3.458087] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 3.490509] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 3.608509] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 3.608516] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.608522] usb 7-2.3: Manufacturer: Broadcom Corp [ 3.617102] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 [ 3.617729] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 3.785417] composite sync not supported [ 3.801315] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 3.903139] fbcon: inteldrmfb (fb0) is primary device [ 3.905338] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 3.934332] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 3.934335] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 3.942220] Console: switching to colour frame buffer device 160x50 [ 3.944815] fb0: inteldrmfb frame buffer device [ 3.944817] drm: registered panic notifier [ 3.980396] acpi device:30: registered as cooling_device2 [ 3.982039] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10 [ 3.982542] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.982698] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 3.983085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.984612] modprobe used greatest stack depth: 3632 bytes left [ 4.006876] dracut: Starting plymouth daemon [ 4.032280] composite sync not supported [ 4.677741] sdhci: Secure Digital Host Controller Interface driver [ 4.677744] sdhci: Copyright(c) Pierre Ossman [ 4.681442] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.704537] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 4.712427] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 4.734396] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 4.735038] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 4.735083] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 4.749117] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 4.756398] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 4.756467] ehci_hcd 0000:00:1d.7: PME# enabled [ 4.757549] Registered led device: mmc0:: [ 4.763635] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 5.278189] firewire_core: created device fw0: GUID 444fc00012d94c70, S400 [ 5.526909] dracut: Scanning devices sda7 for LVM volume groups [ 5.746322] dracut: Reading all physical volumes. This may take a while... [ 5.746504] dracut: Found volume group "vg0" using metadata type lvm2 [ 13.943791] dracut: 7 logical volume(s) in volume group "vg0" now active [ 13.997986] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 14.065807] dracut: Remounting /dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro [ 14.073684] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 14.109869] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b [ 14.285216] dracut: Loading SELinux policy [ 14.821857] SELinux: 2048 avtab hash slots, 210512 rules. [ 15.062818] SELinux: 2048 avtab hash slots, 210512 rules. [ 16.257866] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats [ 16.257871] SELinux: 77 classes, 210512 rules [ 16.280639] SELinux: Permission read_policy in class security not defined in policy. [ 16.280836] SELinux: the above unknown classes and permissions will be allowed [ 16.280888] SELinux: Completing initialization. [ 16.280890] SELinux: Setting up existing superblocks. [ 16.281140] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 16.281250] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 16.285100] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 16.285159] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 16.285361] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 16.285501] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 16.289732] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 16.289819] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 16.302191] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 16.302290] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 16.302363] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 16.302523] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 16.302645] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 16.302748] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 16.302973] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 16.303136] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 16.303178] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 16.309498] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 16.309636] SELinux: initialized (dev dm-8, type ext4), uses xattr [ 16.332023] type=1403 audit(1291229923.182:2): policy loaded auid=4294967295 ses=4294967295 [ 16.335793] load_policy used greatest stack depth: 3616 bytes left [ 16.977881] dracut: Switching root [ 18.371367] readahead: starting [ 20.593220] udev[421]: starting version 161 [ 21.151871] type=1400 audit(1291229928.002:3): avc: denied { mmap_zero } for pid=460 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect [ 21.612432] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 21.612461] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 21.621456] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 22.224348] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.401612] wmi: Mapper loaded [ 22.417528] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 22.422710] iTCO_vendor_support: vendor-support=0 [ 22.492482] Linux video capture interface: v2.00 [ 22.529270] Bluetooth: Core ver 2.15 [ 22.529626] NET: Registered protocol family 31 [ 22.529628] Bluetooth: HCI device and connection manager initialized [ 22.529744] Bluetooth: HCI socket layer initialized [ 22.589540] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 22.594504] usbcore: registered new interface driver btusb [ 22.623624] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 22.636386] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 22.688738] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 22.689314] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 22.690603] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input12 [ 22.691928] usbcore: registered new interface driver uvcvideo [ 22.691931] USB Video Class driver (v1.0.0) [ 22.706943] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 22.707694] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 22.716517] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.747929] cfg80211: Calling CRDA to update world regulatory domain [ 22.781109] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 22.781580] r852: driver loaded succesfully [ 22.810221] sky2: driver version 1.28 [ 22.810320] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.810352] sky2 0000:09:00.0: setting latency timer to 64 [ 22.810436] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 22.810640] sky2 0000:09:00.0: irq 42 for MSI/MSI-X [ 22.812672] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6 [ 23.418423] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 23.418427] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 23.418748] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 23.418786] iwlagn 0000:0b:00.0: setting latency timer to 64 [ 23.418994] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 23.421112] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 23.421377] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 23.421513] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 23.463654] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 23.463778] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 23.464326] iwlagn 0000:0b:00.0: irq 44 for MSI/MSI-X [ 23.530574] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 [ 23.592133] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 23.592139] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.592142] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) [ 23.592146] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 [ 23.592149] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0 [ 23.592152] ALSA sound/pci/hda/hda_codec.c:4632: inputs: [ 23.592154] ALSA sound/pci/hda/hda_codec.c:4638: [ 23.592660] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) [ 23.669882] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 23.695637] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 23.696100] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 23.696488] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 25.002862] ip used greatest stack depth: 3488 bytes left [ 25.138893] cfg80211: World regulatory domain updated: [ 25.138898] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.138901] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.138904] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.138907] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.138909] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.138912] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.126455] cfg80211: Calling CRDA for country: GB [ 26.137270] cfg80211: Regulatory domain changed to country: GB [ 26.137273] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.137276] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.137279] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.137281] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.137284] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 28.723108] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 28.723194] ehci_hcd 0000:00:1a.7: PME# enabled [ 29.472318] EXT4-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended [ 29.472824] EXT4-fs (dm-8): re-mounted. Opts: (null) [ 30.773425] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 32.708965] dmeventd (1026): /proc/1026/oom_adj is deprecated, please use /proc/1026/oom_score_adj instead. [ 33.591276] NET: Registered protocol family 10 [ 33.597288] lo: Disabled Privacy Extensions [ 33.642106] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 38.775052] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xfed1c400-0xfed1c7ff] (PCI address [0xfed1c400-0xfed1c7ff]) [ 38.775081] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x307) [ 38.775123] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [ 38.790106] ehci_hcd 0000:00:1a.7: PME# disabled [ 38.790127] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 38.790139] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 39.448235] Bluetooth: L2CAP ver 2.15 [ 39.448238] Bluetooth: L2CAP socket layer initialized [ 39.499833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 39.499836] Bluetooth: BNEP filters: protocol multicast [ 39.523434] Bluetooth: SCO (Voice Link) ver 0.6 [ 39.523437] Bluetooth: SCO socket layer initialized [ 39.707323] Bluetooth: RFCOMM TTY layer initialized [ 39.707342] Bluetooth: RFCOMM socket layer initialized [ 39.707344] Bluetooth: RFCOMM ver 1.11 [ 39.728612] sky2 0000:09:00.0: eth0: enabling interface [ 39.735274] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.022325] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.026976] Bridge firewalling registered [ 42.707959] btusb_intr_complete: hci0 urb ffff8801150b5c60 failed to resubmit (1) [ 42.709982] btusb_bulk_complete: hci0 urb ffff8801150b5d68 failed to resubmit (1) [ 42.710958] btusb_bulk_complete: hci0 urb ffff8801150b5e70 failed to resubmit (1) [ 43.047950] Ebtables v2.0 registered [ 43.209420] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 43.211964] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 43.230488] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 43.237551] lo: Disabled Privacy Extensions [ 43.239338] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 44.039694] composite sync not supported [ 44.039741] composite sync not supported [ 44.500765] composite sync not supported [ 44.723276] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 44.723428] ehci_hcd 0000:00:1a.7: PME# enabled [ 49.400259] composite sync not supported [ 49.641216] composite sync not supported [ 49.927674] composite sync not supported [ 50.159396] composite sync not supported [ 82.774291] composite sync not supported [ 83.018414] composite sync not supported [ 83.297336] composite sync not supported [ 83.538830] composite sync not supported [ 83.993677] fuse init (API version 7.15) [ 84.042734] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 84.063817] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 87.580182] composite sync not supported [ 106.640882] wlan0: deauthenticating from 00:14:7f:e2:7a:24 by local choice (reason=3) [ 106.666373] wlan0: authenticate with 00:14:7f:e2:7a:24 (try 1) [ 106.668508] wlan0: authenticated [ 106.695156] wlan0: waiting for beacon from 00:14:7f:e2:7a:24 [ 106.773297] wlan0: beacon received [ 106.773693] wlan0: associate with 00:14:7f:e2:7a:24 (try 1) [ 106.777201] wlan0: RX AssocResp from 00:14:7f:e2:7a:24 (capab=0x411 status=0 aid=1) [ 106.777210] wlan0: associated [ 106.846731] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 117.122181] wlan0: no IPv6 routers present [-- Attachment #3: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-01 19:15 ` M A Young @ 2010-12-03 20:06 ` Konrad Rzeszutek Wilk 2010-12-03 22:20 ` M A Young 0 siblings, 1 reply; 13+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-12-03 20:06 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On Wed, Dec 01, 2010 at 07:15:29PM +0000, M A Young wrote: > On Wed, 1 Dec 2010, Konrad Rzeszutek Wilk wrote: > > >>[ 1.443315] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 499 > > ^^^ > >>[ 1.443315] ata2: DUMMY > >>[ 1.443315] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 499 > > ^^^^-??? > > > >That looks odd. Wonder what on baremetal it says? > > [ 1.558411] ata1: SATA max UDMA/133 irq_stat 0x00400040, > connection status changed irq 40 > [ 1.558414] ata2: DUMMY > [ 1.558417] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port > 0xfe9fba00 irq 40 > > This is with the same kernel but without xen. The full log is attached. Ok, so it is using legacy IRQs and then it swaps over the the MSI ones. Under Xen it ends up using IRQ numbers from the back, so that is Ok.. But I wonder if it is just not getting them. Can you pass in pci=nomsi on the Linux kernel line just to see if it is indeed MSI (or vector) related. And also under the Xen hypervisor serial line print out the PCI MSI irq and IRQ vectors values? Don't remember the debug keys - but the point is to see if for your AHCI controller: 0000:00:1f.2 and 0000:00:1f.1, there is an MSI vector allocated for it. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-03 20:06 ` Konrad Rzeszutek Wilk @ 2010-12-03 22:20 ` M A Young 2010-12-03 23:11 ` Konrad Rzeszutek Wilk 0 siblings, 1 reply; 13+ messages in thread From: M A Young @ 2010-12-03 22:20 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 641 bytes --] On Fri, 3 Dec 2010, Konrad Rzeszutek Wilk wrote: > Can you pass in pci=nomsi on the Linux kernel line just to see if it is > indeed MSI (or vector) related. I still see the delay with pci=nomsi. The dmseg output from that boot is attached. > And also under the Xen hypervisor serial line print out the PCI MSI irq and IRQ vectors > values? Don't remember the debug keys - but the point is to see if for your AHCI controller: > 0000:00:1f.2 and 0000:00:1f.1, there is an MSI vector allocated for it. I tried various xm debug-keys (M,Q,i and z) on a boot without pci=nomsi. The output of xm dmesg afterwards is attached. Michael Young [-- Attachment #2: Type: TEXT/PLAIN, Size: 4394 bytes --] __ __ _ _ ___ _ __ __ _ _ _ \ \/ /___ _ __ | || | / _ \ / | / /_ / _| ___/ | || | \ // _ \ '_ \ | || |_| | | || |__| '_ \ | |_ / __| | || |_ / \ __/ | | | |__ _| |_| || |__| (_) || _| (__| |__ _| /_/\_\___|_| |_| |_|(_)___(_)_| \___(_)_| \___|_| |_| (XEN) Xen version 4.0.1 (mockbuild@(none)) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) Tue Oct 12 22:05:04 UTC 2010 (XEN) Latest ChangeSet: unavailable (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 0000000000100000 - 00000000df66d800 (usable) (XEN) 00000000df66d800 - 00000000e0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fed18000 - 00000000fed1c000 (reserved) (XEN) 00000000fed20000 - 00000000fed90000 (reserved) (XEN) 00000000feda0000 - 00000000feda6000 (reserved) (XEN) 00000000fee00000 - 00000000fee10000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) ACPI: RSDP 000FBC60, 0024 (r2 DELL ) (XEN) ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D90A1B ASL 61) (XEN) ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624) (XEN) ACPI: FACS DF67E000, 0040 (XEN) ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) (XEN) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D90A1B ASL 47) (XEN) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SLIC DF66F49C, 0176 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SSDT DF66D97E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) (XEN) System RAM: 4086MB (4184112kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2394.062 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) I/O virtualisation disabled (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) Brought up 2 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2ac8000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (967228 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff82ac8000 (XEN) Init. ramdisk: ffffffff82ac8000->ffffffff84ea1a00 (XEN) Phys-Mach map: ffffffff84ea2000->ffffffff856431e0 (XEN) Start info: ffffffff85644000->ffffffff856444b4 (XEN) Page tables: ffffffff85645000->ffffffff85674000 (XEN) Boot stack: ffffffff85674000->ffffffff85675000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff81d36200 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 172kB init memory. [-- Attachment #3: Type: TEXT/PLAIN, Size: 15701 bytes --] __ __ _ _ ___ _ __ __ _ _ _ \ \/ /___ _ __ | || | / _ \ / | / /_ / _| ___/ | || | \ // _ \ '_ \ | || |_| | | || |__| '_ \ | |_ / __| | || |_ / \ __/ | | | |__ _| |_| || |__| (_) || _| (__| |__ _| /_/\_\___|_| |_| |_|(_)___(_)_| \___(_)_| \___|_| |_| (XEN) Xen version 4.0.1 (mockbuild@(none)) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) Tue Oct 12 22:05:04 UTC 2010 (XEN) Latest ChangeSet: unavailable (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 0000000000100000 - 00000000df66d800 (usable) (XEN) 00000000df66d800 - 00000000e0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fed18000 - 00000000fed1c000 (reserved) (XEN) 00000000fed20000 - 00000000fed90000 (reserved) (XEN) 00000000feda0000 - 00000000feda6000 (reserved) (XEN) 00000000fee00000 - 00000000fee10000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) ACPI: RSDP 000FBC60, 0024 (r2 DELL ) (XEN) ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D90A1B ASL 61) (XEN) ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624) (XEN) ACPI: FACS DF67E000, 0040 (XEN) ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) (XEN) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D90A1B ASL 47) (XEN) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SLIC DF66F49C, 0176 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SSDT DF66D97E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) (XEN) System RAM: 4086MB (4184112kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2394.111 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) I/O virtualisation disabled (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) Brought up 2 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2ac8000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (967228 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff82ac8000 (XEN) Init. ramdisk: ffffffff82ac8000->ffffffff84ea1a00 (XEN) Phys-Mach map: ffffffff84ea2000->ffffffff856431e0 (XEN) Start info: ffffffff85644000->ffffffff856444b4 (XEN) Page tables: ffffffff85645000->ffffffff85674000 (XEN) Boot stack: ffffffff85674000->ffffffff85675000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff81d36200 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 172kB init memory. (XEN) PCI-MSI interrupt information: (XEN) MSI 24 vec=b0 lowest edge assert log lowest dest=00000001 mask=0/0/-1 (XEN) MSI 25 vec=d0 lowest edge assert log lowest dest=00000001 mask=0/0/-1 (XEN) MSI 26 vec=21 lowest edge assert log lowest dest=00000001 mask=0/0/-1 (XEN) MSI 27 vec=29 lowest edge assert log lowest dest=00000001 mask=0/0/-1 (XEN) MSI 28 vec=31 lowest edge assert log lowest dest=00000001 mask=0/0/-1 (XEN) ==== PCI devices ==== (XEN) 02:09.3 - dom 0 - MSIs < > (XEN) 02:09.2 - dom 0 - MSIs < > (XEN) 02:09.1 - dom 0 - MSIs < > (XEN) 02:09.0 - dom 0 - MSIs < > (XEN) 0b:00.0 - dom 0 - MSIs < 28 > (XEN) 09:00.0 - dom 0 - MSIs < 26 > (XEN) 00:1f.3 - dom 0 - MSIs < > (XEN) 00:1f.2 - dom 0 - MSIs < 24 > (XEN) 00:1f.1 - dom 0 - MSIs < > (XEN) 00:1f.0 - dom 0 - MSIs < > (XEN) 00:1e.0 - dom 0 - MSIs < > (XEN) 00:1d.7 - dom 0 - MSIs < > (XEN) 00:1d.2 - dom 0 - MSIs < > (XEN) 00:1d.1 - dom 0 - MSIs < > (XEN) 00:1d.0 - dom 0 - MSIs < > (XEN) 00:1c.4 - dom 0 - MSIs < > (XEN) 00:1c.1 - dom 0 - MSIs < > (XEN) 00:1c.0 - dom 0 - MSIs < > (XEN) 00:1b.0 - dom 0 - MSIs < 27 > (XEN) 00:1a.7 - dom 0 - MSIs < > (XEN) 00:1a.1 - dom 0 - MSIs < > (XEN) 00:1a.0 - dom 0 - MSIs < > (XEN) 00:02.1 - dom 0 - MSIs < > (XEN) 00:02.0 - dom 0 - MSIs < 25 > (XEN) 00:00.0 - dom 0 - MSIs < > (XEN) Guest interrupt information: (XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0 type=IO-APIC-edge status=00000000 mapped, unbound (XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(----), (XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2 type=XT-PIC status=00000000 mapped, unbound (XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:30 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:38 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:40 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:48 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:50 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:58 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(----), (XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:60 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(----), (XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:68 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:70 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:78 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 12(----), (XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000003 vec:88 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:90 type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 14(----), (XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:98 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 15(----), (XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(----), (XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000003 vec:a8 type=IO-APIC-level status=00000002 mapped, unbound (XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:d8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(----), (XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000001 vec:c0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 20(----), (XEN) IRQ: 21 affinity:00000000,00000000,00000000,00000001 vec:c8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 21(----), (XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:b8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 22(----), (XEN) IRQ: 24 affinity:00000000,00000000,00000000,00000001 vec:b0 type=PCI-MSI status=00000014 in-flight=0 domain-list=0:279(----), (XEN) IRQ: 25 affinity:00000000,00000000,00000000,00000001 vec:d0 type=PCI-MSI status=00000010 in-flight=0 domain-list=0:278(----), (XEN) IRQ: 26 affinity:00000000,00000000,00000000,00000001 vec:21 type=PCI-MSI status=00000010 in-flight=0 domain-list=0:277(----), (XEN) IRQ: 27 affinity:00000000,00000000,00000000,00000001 vec:29 type=PCI-MSI status=00000010 in-flight=0 domain-list=0:276(----), (XEN) IRQ: 28 affinity:00000000,00000000,00000000,00000001 vec:31 type=PCI-MSI status=00000010 in-flight=0 domain-list=0:275(----), (XEN) IO-APIC interrupt information: (XEN) IRQ 0 Vec240: (XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 1 Vec 40: (XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 3 Vec 48: (XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 4 Vec 56: (XEN) Apic 0x00, Pin 4: vector=56, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 5 Vec 64: (XEN) Apic 0x00, Pin 5: vector=64, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 6 Vec 72: (XEN) Apic 0x00, Pin 6: vector=72, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 7 Vec 80: (XEN) Apic 0x00, Pin 7: vector=80, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 8 Vec 88: (XEN) Apic 0x00, Pin 8: vector=88, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 9 Vec 96: (XEN) Apic 0x00, Pin 9: vector=96, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 10 Vec104: (XEN) Apic 0x00, Pin 10: vector=104, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 11 Vec112: (XEN) Apic 0x00, Pin 11: vector=112, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 12 Vec120: (XEN) Apic 0x00, Pin 12: vector=120, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 13 Vec136: (XEN) Apic 0x00, Pin 13: vector=136, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:3 (XEN) IRQ 14 Vec144: (XEN) Apic 0x00, Pin 14: vector=144, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 15 Vec152: (XEN) Apic 0x00, Pin 15: vector=152, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 16 Vec160: (XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 17 Vec168: (XEN) Apic 0x00, Pin 17: vector=168, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:3 (XEN) IRQ 18 Vec216: (XEN) Apic 0x00, Pin 18: vector=216, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 20 Vec192: (XEN) Apic 0x00, Pin 20: vector=192, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 21 Vec200: (XEN) Apic 0x00, Pin 21: vector=200, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 22 Vec184: (XEN) Apic 0x00, Pin 22: vector=184, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #2 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #2...... (XEN) .... register #00: 00000000 (XEN) ....... : physical APIC id: 00 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 38 (XEN) 05 001 01 0 0 0 0 0 1 1 40 (XEN) 06 001 01 0 0 0 0 0 1 1 48 (XEN) 07 001 01 0 0 0 0 0 1 1 50 (XEN) 08 001 01 0 0 0 0 0 1 1 58 (XEN) 09 001 01 0 1 0 0 0 1 1 60 (XEN) 0a 001 01 0 0 0 0 0 1 1 68 (XEN) 0b 001 01 0 0 0 0 0 1 1 70 (XEN) 0c 001 01 0 0 0 0 0 1 1 78 (XEN) 0d 003 03 1 0 0 0 0 1 1 88 (XEN) 0e 001 01 0 0 0 0 0 1 1 90 (XEN) 0f 001 01 0 0 0 0 0 1 1 98 (XEN) 10 001 01 0 1 0 1 0 1 1 A0 (XEN) 11 003 03 1 1 0 1 0 1 1 A8 (XEN) 12 001 01 0 1 0 1 0 1 1 D8 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 001 01 0 1 0 1 0 1 1 C0 (XEN) 15 001 01 0 1 0 1 0 1 1 C8 (XEN) 16 001 01 0 1 0 1 0 1 1 B8 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ56 -> 0:4 (XEN) IRQ64 -> 0:5 (XEN) IRQ72 -> 0:6 (XEN) IRQ80 -> 0:7 (XEN) IRQ88 -> 0:8 (XEN) IRQ96 -> 0:9 (XEN) IRQ104 -> 0:10 (XEN) IRQ112 -> 0:11 (XEN) IRQ120 -> 0:12 (XEN) IRQ136 -> 0:13 (XEN) IRQ144 -> 0:14 (XEN) IRQ152 -> 0:15 (XEN) IRQ160 -> 0:16 (XEN) IRQ168 -> 0:17 (XEN) IRQ216 -> 0:18 (XEN) IRQ192 -> 0:20 (XEN) IRQ200 -> 0:21 (XEN) IRQ184 -> 0:22 (XEN) .................................... done. [-- Attachment #4: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-03 22:20 ` M A Young @ 2010-12-03 23:11 ` Konrad Rzeszutek Wilk 2010-12-08 22:12 ` M A Young 0 siblings, 1 reply; 13+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-12-03 23:11 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On Fri, Dec 03, 2010 at 10:20:55PM +0000, M A Young wrote: > On Fri, 3 Dec 2010, Konrad Rzeszutek Wilk wrote: > > >Can you pass in pci=nomsi on the Linux kernel line just to see if it is > >indeed MSI (or vector) related. > > I still see the delay with pci=nomsi. The dmseg output from that > boot is attached. It still looks to be using MSIs.. Maybe the command line parameter is wrong? > > >And also under the Xen hypervisor serial line print out the PCI MSI irq and IRQ vectors > >values? Don't remember the debug keys - but the point is to see if for your AHCI controller: > >0000:00:1f.2 and 0000:00:1f.1, there is an MSI vector allocated for it. > > I tried various xm debug-keys (M,Q,i and z) on a boot without > pci=nomsi. The output of xm dmesg afterwards is attached. Try it also on Xen line, thought I am not sure what the arguments for disabling MSI in the hypervisor are. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-03 23:11 ` Konrad Rzeszutek Wilk @ 2010-12-08 22:12 ` M A Young 2010-12-08 22:50 ` M A Young 0 siblings, 1 reply; 13+ messages in thread From: M A Young @ 2010-12-08 22:12 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel On Fri, 3 Dec 2010, Konrad Rzeszutek Wilk wrote: > On Fri, Dec 03, 2010 at 10:20:55PM +0000, M A Young wrote: >> I still see the delay with pci=nomsi. The dmseg output from that >> boot is attached. > > It still looks to be using MSIs.. Maybe the command line parameter is wrong? The documentation says it should work. >> I tried various xm debug-keys (M,Q,i and z) on a boot without >> pci=nomsi. The output of xm dmesg afterwards is attached. > > Try it also on Xen line, thought I am not sure what the arguments > for disabling MSI in the hypervisor are. I can't see any options in the xen hypervisor to turn msi off. Michael Young ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-08 22:12 ` M A Young @ 2010-12-08 22:50 ` M A Young 2010-12-09 1:22 ` Konrad Rzeszutek Wilk 2010-12-14 17:02 ` Konrad Rzeszutek Wilk 0 siblings, 2 replies; 13+ messages in thread From: M A Young @ 2010-12-08 22:50 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 158 bytes --] Actually, I might have sent the wrong log files in my earlier post. Here are the kernel dmesg output and debugkeys output from a nomsi boot. Michael Young [-- Attachment #2: Type: TEXT/PLAIN, Size: 78993 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.5.1 20101130 (Red Hat 4.5.1-6) (GCC) ) #1 SMP Thu Dec 2 16:56:26 UTC 2010 [ 0.000000] Command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi [ 0.000000] xen_release_chunk: looking at area pfn e0000-f423c: 82492 pages freed [ 0.000000] released 82492 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] Xen: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] Xen: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000013423c000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17 10/27/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 05fff000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000 [ 0.000000] 0000000000 - 00df66d000 page 4k [ 0.000000] kernel direct mapping tables up to df66d000 @ 58fe000-5fff000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013423c000 [ 0.000000] 0100000000 - 013423c000 page 4k [ 0.000000] kernel direct mapping tables up to 13423c000 @ decc5000-df66d000 [ 0.000000] RAMDISK: 02ac8000 - 04ea2000 [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000df67e000 00040 [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013423c000 [ 0.000000] Initmem setup node 0 0000000000000000-000000013423c000 [ 0.000000] NODE_DATA [00000000df658800 - 00000000df66d7ff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013423c [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00100000 -> 0x0013423c [ 0.000000] On node 0 totalpages: 1128504 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31 [ 0.000000] Normal zone: 2920 pages used for memmap [ 0.000000] Normal zone: 210644 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 [ 0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800dee7d000 s1920512 r8192 d20992 u1949696 [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u1949696 alloc=476*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1111242 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff8800d6200000 - ffff8800da200000 [ 0.000000] software IO TLB at phys 0xd6200000 - 0xda200000 [ 0.000000] Memory: 3446248k/5048560k available (4849k kernel code, 534544k absent, 1067768k reserved, 6795k data, 2744k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 45875200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2394.062 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.12 BogoMIPS (lpj=2394062) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.003293] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008310] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010522] Mount-cache hash table entries: 256 [ 0.012437] Initializing cgroup subsys ns [ 0.012457] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012469] Initializing cgroup subsys cpuacct [ 0.012501] Initializing cgroup subsys memory [ 0.012651] Initializing cgroup subsys devices [ 0.012661] Initializing cgroup subsys freezer [ 0.012669] Initializing cgroup subsys net_cls [ 0.012677] Initializing cgroup subsys blkio [ 0.012944] CPU: Physical Processor ID: 0 [ 0.012950] CPU: Processor Core ID: 0 [ 0.012958] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.013701] ACPI: Core revision 20101013 [ 0.040046] ftrace: allocating 24696 entries in 97 pages [ 0.045474] NMI watchdog failed to create perf event on cpu0: fffffffffffffffe [ 0.046200] installing Xen timer for CPU 1 [ 0.046316] lockdep: fixing up alternatives. [ 0.046692] NMI watchdog failed to create perf event on cpu1: fffffffffffffffe [ 0.046703] Brought up 2 CPUs [ 0.046707] sizeof(vma)=184 bytes [ 0.046710] sizeof(page)=56 bytes [ 0.046712] sizeof(inode)=1088 bytes [ 0.046715] sizeof(dentry)=264 bytes [ 0.046717] sizeof(ext3inode)=1552 bytes [ 0.046719] sizeof(ext4inode)=1912 bytes [ 0.046722] sizeof(buffer_head)=104 bytes [ 0.046724] sizeof(skbuff)=240 bytes [ 0.046726] sizeof(task_struct)=9104 bytes [ 0.047720] devtmpfs: initialized [ 0.057506] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.057541] Grant table initialized [ 0.057590] Time: 20:38:44 Date: 12/03/10 [ 0.057999] NET: Registered protocol family 16 [ 0.060248] ACPI: bus type pci registered [ 0.060864] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060875] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.079750] PCI: Using configuration type 1 for base access [ 0.091103] bio: create slab <bio-0> at 0 [ 0.094391] ACPI: EC: Look up EC in DSDT [ 0.115142] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.115999] ACPI: Dynamic OEM Table Load: [ 0.115999] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.116306] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.116999] ACPI: Dynamic OEM Table Load: [ 0.116999] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.117113] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.117999] ACPI: Dynamic OEM Table Load: [ 0.117999] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.118068] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.118999] ACPI: Dynamic OEM Table Load: [ 0.118999] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.118999] ACPI: Interpreter enabled [ 0.118999] ACPI: (supports S0 S3 S4 S5) [ 0.118999] ACPI: Using IOAPIC for interrupt routing [ 0.252999] ACPI: No dock devices found. [ 0.252999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.279999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.329999] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x120000000-0x317ffffff] conflicts with System RAM [mem 0x100000000-0x13423bfff] [ 0.329999] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.330103] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.330185] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.330233] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.330265] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.330490] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.330559] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.330999] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.330999] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.331056] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.331247] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.331458] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.331536] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.331855] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.331869] pci 0000:00:1a.7: PME# disabled [ 0.331972] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.331999] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.332030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.332043] pci 0000:00:1b.0: PME# disabled [ 0.332146] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.332453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.332466] pci 0000:00:1c.0: PME# disabled [ 0.332578] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.332883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.332896] pci 0000:00:1c.1: PME# disabled [ 0.332999] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.333059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.333073] pci 0000:00:1c.4: PME# disabled [ 0.333207] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.333400] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.333555] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.333746] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.333900] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.333999] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.334105] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.334184] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.334501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.334515] pci 0000:00:1d.7: PME# disabled [ 0.334597] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.334903] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.335089] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.335143] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.335180] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.335218] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.335256] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.335293] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.335507] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.335595] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.335632] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.335670] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.335707] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.335745] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.335783] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.335956] pci 0000:00:1f.2: PME# supported from D3hot [ 0.335969] pci 0000:00:1f.2: PME# disabled [ 0.335999] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.335999] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.335999] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.336324] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 [ 0.336408] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.336452] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] [ 0.336760] pci 0000:09:00.0: supports D1 D2 [ 0.336763] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336778] pci 0000:09:00.0: PME# disabled [ 0.336999] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.336999] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.336999] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280 [ 0.336999] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] [ 0.337067] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.337106] pci 0000:0b:00.0: PME# disabled [ 0.337449] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.337467] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.337480] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.337504] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.337717] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.337734] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.337747] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.337770] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.337999] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00 [ 0.337999] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff] [ 0.338031] pci 0000:02:09.0: supports D1 D2 [ 0.338034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338085] pci 0000:02:09.0: PME# disabled [ 0.338160] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805 [ 0.338229] pci 0000:02:09.1: reg 10: [mem 0xfe3ff500-0xfe3ff5ff] [ 0.338532] pci 0000:02:09.1: supports D1 D2 [ 0.338535] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338550] pci 0000:02:09.1: PME# disabled [ 0.338624] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880 [ 0.338694] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff] [ 0.338995] pci 0000:02:09.2: supports D1 D2 [ 0.338998] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338999] pci 0000:02:09.2: PME# disabled [ 0.339070] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880 [ 0.339140] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff] [ 0.339441] pci 0000:02:09.3: supports D1 D2 [ 0.339444] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.339459] pci 0000:02:09.3: PME# disabled [ 0.339654] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.339672] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.339685] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.339709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.339714] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.339718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.339723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.339727] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.339735] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.339739] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.339744] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.339758] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.339762] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.339767] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.339771] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.339776] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.339876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.345616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.345999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.375866] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.376592] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.377418] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.377999] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.378588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.378999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.379588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.379999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.380062] HEST: Table is not found! [ 0.380149] xen_balloon: Initialising balloon driver. [ 0.380305] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.386887] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.386999] vgaarb: loaded [ 0.387816] SCSI subsystem initialized [ 0.388214] libata version 3.00 loaded. [ 0.388719] usbcore: registered new interface driver usbfs [ 0.388860] usbcore: registered new interface driver hub [ 0.389098] usbcore: registered new device driver usb [ 0.389507] PCI: Using ACPI for IRQ routing [ 0.389507] PCI: pci_cache_line_size set to 64 bytes [ 0.389861] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.389876] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.389884] reserve RAM buffer: 000000013423c000 - 0000000137ffffff [ 0.390943] NetLabel: Initializing [ 0.390949] NetLabel: domain hash size = 128 [ 0.390954] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.390999] NetLabel: unlabeled traffic allowed by default [ 0.391982] Switching to clocksource xen [ 0.513144] pnp: PnP ACPI init [ 0.513315] ACPI: bus type pnp registered [ 0.564054] pnp 00:00: [bus 00-ff] [ 0.564054] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.564054] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.575063] pnp 00:00: [io 0x0d00-0xffff window] [ 0.575068] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.575072] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.575077] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.575081] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.575085] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.575089] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.575093] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.575097] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.575101] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.575106] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.575110] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.575776] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.575877] pnp 00:01: [io 0x004e-0x004f] [ 0.575882] pnp 00:01: [io 0x0068-0x006f] [ 0.575886] pnp 00:01: [mem 0xff800000-0xff8fffff] [ 0.575890] pnp 00:01: [mem 0xffc00000-0xffcfffff] [ 0.576355] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.576498] xen: registering gsi 12 triggering 1 polarity 0 [ 0.576503] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.576510] xen: --> irq=12 [ 0.576527] pnp 00:02: [irq 12] [ 0.576800] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.576939] pnp 00:03: [io 0x0060] [ 0.576943] pnp 00:03: [io 0x0064] [ 0.576947] pnp 00:03: [io 0x0062] [ 0.576950] pnp 00:03: [io 0x0066] [ 0.576954] xen: registering gsi 1 triggering 1 polarity 0 [ 0.576958] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.576965] xen: --> irq=1 [ 0.576972] pnp 00:03: [irq 1] [ 0.577267] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.577413] pnp 00:04: [io 0x0070-0x0071] [ 0.577416] xen: registering gsi 8 triggering 1 polarity 0 [ 0.577420] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.577427] xen: --> irq=8 [ 0.577435] pnp 00:04: [irq 8] [ 0.577447] pnp 00:04: [io 0x0072-0x0077] [ 0.577710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.577884] pnp 00:05: [io 0x0061] [ 0.577888] pnp 00:05: [io 0x0063] [ 0.577892] pnp 00:05: [io 0x0065] [ 0.577895] pnp 00:05: [io 0x0067] [ 0.578188] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.578332] pnp 00:06: [io 0x0c80-0x0cff] [ 0.578836] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.579009] pnp 00:07: [dma 4] [ 0.579013] pnp 00:07: [io 0x0000-0x000f] [ 0.579016] pnp 00:07: [io 0x0080-0x0085] [ 0.579020] pnp 00:07: [io 0x0087-0x008f] [ 0.579023] pnp 00:07: [io 0x00c0-0x00df] [ 0.579026] pnp 00:07: [io 0x0010-0x001f] [ 0.579030] pnp 00:07: [io 0x0090-0x0091] [ 0.579030] pnp 00:07: [io 0x0093-0x009f] [ 0.579311] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.579453] pnp 00:08: [io 0x00f0-0x00ff] [ 0.579457] xen: registering gsi 13 triggering 1 polarity 0 [ 0.579461] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.579468] xen: --> irq=13 [ 0.579476] pnp 00:08: [irq 13] [ 0.579772] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.580167] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.580745] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.581487] pnp 00:0a: [io 0x0900-0x097f] [ 0.581487] pnp 00:0a: [io 0x0092] [ 0.581487] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.581487] pnp 00:0a: [io 0x0020-0x0021] [ 0.581487] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.581487] pnp 00:0a: [irq 0 disabled] [ 0.581487] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.582587] pnp 00:0a: [io 0x1000-0x1005] [ 0.582591] pnp 00:0a: [io 0x1008-0x100f] [ 0.582738] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.582750] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583328] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.583471] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.583475] pnp 00:0b: [io 0x0086] [ 0.583479] pnp 00:0b: [io 0x1006-0x1007] [ 0.583483] pnp 00:0b: [io 0x100a-0x1059] [ 0.583486] pnp 00:0b: [io 0x1060-0x107f] [ 0.583490] pnp 00:0b: [io 0x1080-0x10bf] [ 0.583494] pnp 00:0b: [io 0x10c0-0x10df] [ 0.583497] pnp 00:0b: [io 0x1010-0x102f] [ 0.583501] pnp 00:0b: [io 0x0809] [ 0.583647] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583659] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583669] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583680] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.584286] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.661805] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.661805] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.661805] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.661805] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.661805] pnp 00:0c: [mem 0x00100000-0xdf66d7ff] [ 0.661805] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff] [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdf7fffff] [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdfefffff] [ 0.661805] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.661805] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.661805] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.661805] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.661805] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.666782] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.666786] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.666790] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.666794] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.666798] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.666802] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.667567] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.668287] pnp: PnP ACPI: found 13 devices [ 0.668295] ACPI: ACPI bus type pnp unregistered [ 0.668353] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.668365] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.668418] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.668460] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.668510] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.668521] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.668559] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.668570] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.668581] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.668591] system 00:0b: [io 0x0809] has been reserved [ 0.668654] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.668672] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.668689] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.668706] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.668723] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.668735] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.668745] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.668762] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.668773] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.668784] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.668801] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.668812] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.668823] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.668833] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.668844] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.668855] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.668866] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.668877] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.668887] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.694225] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.694610] pci 0000:00:1c.0: BAR 15: assigned [mem 0xff600000-0xff7fffff 64bit pref] [ 0.694636] pci 0000:00:1c.1: BAR 15: assigned [mem 0xff400000-0xff5fffff 64bit pref] [ 0.694649] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff] [ 0.694660] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.694672] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.694694] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.694711] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff7fffff 64bit pref] [ 0.694740] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.694751] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.694773] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.694790] pci 0000:00:1c.1: bridge window [mem 0xff400000-0xff5fffff 64bit pref] [ 0.694818] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.694830] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.694851] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.694868] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.694897] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.694903] pci 0000:00:1e.0: bridge window [io disabled] [ 0.694925] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.694941] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.694992] xen: registering gsi 16 triggering 0 polarity 1 [ 0.695042] xen: --> irq=16 [ 0.695052] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.695072] pci 0000:00:1c.0: setting latency timer to 64 [ 0.695099] xen: registering gsi 17 triggering 0 polarity 1 [ 0.695122] xen: --> irq=17 [ 0.695127] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.695145] pci 0000:00:1c.1: setting latency timer to 64 [ 0.695171] xen: registering gsi 16 triggering 0 polarity 1 [ 0.695175] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 0.695182] xen: --> irq=16 [ 0.695185] Already setup the GSI :16 [ 0.695190] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.695208] pci 0000:00:1c.4: setting latency timer to 64 [ 0.695237] pci 0000:00:1e.0: setting latency timer to 64 [ 0.695246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.695250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.695253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.695256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.695260] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.695263] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.695266] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.695269] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.695273] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.695276] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.695279] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.695282] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.695286] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.695289] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.695293] pci_bus 0000:09: resource 2 [mem 0xff600000-0xff7fffff 64bit pref] [ 0.695296] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.695299] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.695303] pci_bus 0000:0b: resource 2 [mem 0xff400000-0xff5fffff 64bit pref] [ 0.695306] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 0.695309] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff] [ 0.695313] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.695316] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.695319] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.695322] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.695326] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.695329] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] [ 0.695332] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.695335] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.695339] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.695342] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.695345] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.695348] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.695352] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.695355] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.695620] NET: Registered protocol family 2 [ 0.696895] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.702432] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.708388] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 0.711010] TCP: Hash tables configured (established 524288 bind 65536) [ 0.711010] TCP reno registered [ 0.715466] UDP hash table entries: 4096 (order: 7, 786432 bytes) [ 0.717423] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes) [ 0.719200] NET: Registered protocol family 1 [ 0.719302] pci 0000:00:02.0: Boot video device [ 0.720070] PCI: CLS 64 bytes, default 64 [ 0.720814] Trying to unpack rootfs image as initramfs... [ 1.119817] Freeing initrd memory: 36712k freed [ 1.218370] DMA-API: preallocated 32768 debug entries [ 1.218386] DMA-API: debugging enabled by kernel config [ 1.218628] Simple Boot Flag at 0x79 set to 0x1 [ 1.222512] audit: initializing netlink socket (disabled) [ 1.222603] type=2000 audit(1291408726.062:1): initialized [ 1.238278] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.265522] VFS: Disk quotas dquot_6.5.2 [ 1.266072] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.271813] msgmni has been set to 6802 [ 1.272678] SELinux: Registering netfilter hooks [ 1.274613] cryptomgr_test used greatest stack depth: 5448 bytes left [ 1.275406] alg: No test for stdrng (krng) [ 1.275771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.275815] io scheduler noop registered [ 1.275822] io scheduler deadline registered [ 1.276284] io scheduler cfq registered (default) [ 1.276292] list_sort_test: start testing list_sort() [ 1.280781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.281008] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.281008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.284654] acpiphp: Slot [1] registered [ 1.285228] pci-stub: invalid id string "" [ 1.287390] ACPI: AC Adapter [AC] (on-line) [ 1.288364] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.289760] ACPI: Lid Switch [LID] [ 1.290137] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.290197] ACPI: Power Button [PBTN] [ 1.290648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.290670] ACPI: Sleep Button [SBTN] [ 1.293175] ACPI: acpi_idle registered with cpuidle [ 1.294827] Marking TSC unstable due to TSC halts in idle [ 1.319147] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.319147] ACPI: Thermal Zone [THM] (47 C) [ 1.319147] ERST: Table is not found! [ 1.400177] hpet_acpi_add: no address or irqs in _CRS [ 1.400672] Non-volatile memory driver v1.3 [ 1.400679] Linux agpgart interface v0.103 [ 1.401141] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.402701] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.404490] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.411011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.411818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.421172] ACPI: Battery Slot [BAT0] (battery present) [ 1.439428] brd: module loaded [ 1.446285] loop: module loaded [ 1.447289] ahci 0000:00:1f.2: version 3.0 [ 1.447326] xen: registering gsi 17 triggering 0 polarity 1 [ 1.447344] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.447351] xen: --> irq=17 [ 1.447357] Already setup the GSI :17 [ 1.447363] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.447710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.447720] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.447740] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.453250] scsi0 : ahci [ 1.454595] scsi1 : ahci [ 1.455304] scsi2 : ahci [ 1.456260] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 [ 1.456260] ata2: DUMMY [ 1.456260] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 17 [ 1.457680] ata_piix 0000:00:1f.1: version 2.13 [ 1.457708] xen: registering gsi 16 triggering 0 polarity 1 [ 1.457712] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.457720] xen: --> irq=16 [ 1.457724] Already setup the GSI :16 [ 1.457731] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.457966] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.461571] scsi3 : ata_piix [ 1.462268] scsi4 : ata_piix [ 1.464011] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.464011] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.466684] ata5: port disabled. ignoring. [ 1.467029] Fixed MDIO Bus: probed [ 1.467683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.467784] xen: registering gsi 22 triggering 0 polarity 1 [ 1.467816] xen: --> irq=22 [ 1.467825] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.467909] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.467918] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.469012] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.469498] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.473404] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.473528] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.483064] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.483383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.483391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.483399] usb usb1: Product: EHCI Host Controller [ 1.483405] usb usb1: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd [ 1.483414] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.484917] hub 1-0:1.0: USB hub found [ 1.485040] hub 1-0:1.0: 4 ports detected [ 1.486129] xen: registering gsi 20 triggering 0 polarity 1 [ 1.486153] xen: --> irq=20 [ 1.486159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.486232] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.486240] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.486697] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.487039] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.490952] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.491009] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.496054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.496233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.496242] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.496250] usb usb2: Product: EHCI Host Controller [ 1.496256] usb usb2: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd [ 1.496264] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.497266] hub 2-0:1.0: USB hub found [ 1.497322] hub 2-0:1.0: 6 ports detected [ 1.498293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.498446] uhci_hcd: USB Universal Host Controller Interface driver [ 1.498758] xen: registering gsi 20 triggering 0 polarity 1 [ 1.498763] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.498770] xen: --> irq=20 [ 1.498773] Already setup the GSI :20 [ 1.498780] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.498818] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.498826] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.499273] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.499485] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.499854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.499862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.499870] usb usb3: Product: UHCI Host Controller [ 1.499876] usb usb3: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.499885] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.500868] hub 3-0:1.0: USB hub found [ 1.500926] hub 3-0:1.0: 2 ports detected [ 1.501788] xen: registering gsi 21 triggering 0 polarity 1 [ 1.501812] xen: --> irq=21 [ 1.501819] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.501857] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.501865] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.502350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.502645] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.502968] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.502977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.502985] usb usb4: Product: UHCI Host Controller [ 1.502991] usb usb4: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.503000] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.503918] hub 4-0:1.0: USB hub found [ 1.503974] hub 4-0:1.0: 2 ports detected [ 1.504830] xen: registering gsi 20 triggering 0 polarity 1 [ 1.504835] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.504842] xen: --> irq=20 [ 1.504846] Already setup the GSI :20 [ 1.504852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.504889] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.504898] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.505401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.505641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.505952] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.505960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.505968] usb usb5: Product: UHCI Host Controller [ 1.505973] usb usb5: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.505982] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.506979] hub 5-0:1.0: USB hub found [ 1.507058] hub 5-0:1.0: 2 ports detected [ 1.508013] xen: registering gsi 21 triggering 0 polarity 1 [ 1.508017] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 1.508024] xen: --> irq=21 [ 1.508053] Already setup the GSI :21 [ 1.508060] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.508097] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.508106] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.508526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.508750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.509110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.509118] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.509126] usb usb6: Product: UHCI Host Controller [ 1.509132] usb usb6: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.509140] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.510075] hub 6-0:1.0: USB hub found [ 1.510142] hub 6-0:1.0: 2 ports detected [ 1.510954] xen: registering gsi 22 triggering 0 polarity 1 [ 1.510958] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 1.510965] xen: --> irq=22 [ 1.510969] Already setup the GSI :22 [ 1.510975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.511037] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.511045] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.511472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.511709] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.512054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.512062] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.512070] usb usb7: Product: UHCI Host Controller [ 1.512076] usb usb7: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.512084] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.512968] hub 7-0:1.0: USB hub found [ 1.513082] hub 7-0:1.0: 2 ports detected [ 1.514306] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.515012] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.541669] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.541669] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.542434] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.542708] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.542998] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.543959] mice: PS/2 mouse device common for all mice [ 1.545789] rtc_cmos 00:04: RTC can wake from S4 [ 1.546497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.546589] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.547751] device-mapper: uevent: version 1.0.3 [ 1.548982] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 1.550808] cpuidle: using governor ladder [ 1.552464] cpuidle: using governor menu [ 1.554429] usbcore: registered new interface driver usbhid [ 1.554436] usbhid: USB HID core driver [ 1.554755] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.559346] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.559463] TCP cubic registered [ 1.559469] Initializing XFRM netlink socket [ 1.559535] NET: Registered protocol family 17 [ 1.559680] Registering the dns_resolver key type [ 1.560789] PM: Hibernation image not present or could not be loaded. [ 1.560912] registered taskstats version 1 [ 1.561465] IMA: No TPM chip found, activating TPM-bypass! [ 1.563842] Magic number: 6:963:648 [ 1.563871] scsi_host host2: hash matches [ 1.563877] scsi host2: hash matches [ 1.563983] processor LNXCPU:01: hash matches [ 1.564101] rtc_cmos 00:04: setting system clock to 2010-12-03 20:38:46 UTC (1291408726) [ 1.564389] Initalizing network drop monitor service [ 1.572051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.636611] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 [ 1.658414] ata4.00: configured for UDMA/33 [ 1.753698] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4 [ 1.761447] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5 [ 1.763120] ata3: SATA link down (SStatus 0 SControl 300) [ 1.787219] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.907020] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 1.907029] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.907037] usb 1-1: Product: Laptop Integrated Webcam [ 1.907043] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 2.181227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.319160] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.486280] usb 6-2: New USB device found, idVendor=046d, idProduct=c517 [ 2.486289] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.486296] usb 6-2: Product: USB Receiver [ 2.486302] usb 6-2: Manufacturer: Logitech [ 2.505613] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 [ 2.506889] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 [ 36.001170] ata1.00: qc timeout (cmd 0x27) [ 36.001187] ata1.00: failed to read native max address (err_mask=0x4) [ 36.001194] ata1.00: HPA support seems broken, skipping HPA handling [ 36.001509] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 36.001858] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 36.002246] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 36.029123] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 36.030289] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7 [ 36.031983] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 [ 36.238211] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 36.307575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.308293] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 [ 36.308310] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 36.309278] ata1.00: configured for UDMA/100 [ 36.310595] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 [ 36.312478] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 36.312938] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.313039] sd 0:0:0:0: [sda] Write Protect is off [ 36.313047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.313264] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.318433] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 [ 36.335230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 36.335244] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 36.336431] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 36.337045] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 36.398715] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 36.398724] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.398732] usb 7-2: Product: BCM2045B2 [ 36.398737] usb 7-2: Manufacturer: Broadcom [ 36.400929] hub 7-2:1.0: USB hub found [ 36.402733] hub 7-2:1.0: 3 ports detected [ 36.679703] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 36.768221] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 36.772364] sd 0:0:0:0: [sda] Attached SCSI disk [ 36.773011] Freeing unused kernel memory: 2744k freed [ 36.773011] Write protecting the kernel read-only data: 10240k [ 36.789969] Freeing unused kernel memory: 1276k freed [ 36.792956] Freeing unused kernel memory: 1616k freed [ 36.800534] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 36.800548] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.800557] usb 7-2.1: Product: BCM2045 [ 36.800562] usb 7-2.1: Manufacturer: Broadcom Corp [ 36.823979] mount used greatest stack depth: 5248 bytes left [ 36.874647] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 36.878951] dracut: dracut-006-5.fc14 [ 36.943518] udev[84]: starting version 161 [ 36.996694] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 36.996706] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 36.996715] usb 7-2.2: Manufacturer: Broadcom Corp [ 105.689486] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 [ 105.690223] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 105.693130] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 105.693268] ehci_hcd 0000:00:1d.7: PME# enabled [ 105.755988] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 105.805477] udevadm used greatest stack depth: 5200 bytes left [ 105.875286] [drm] Initialized drm 1.1.0 20060810 [ 105.915996] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 105.916011] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 105.916011] usb 7-2.3: Manufacturer: Broadcom Corp [ 105.932670] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 [ 105.937353] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 105.948127] xen: registering gsi 16 triggering 0 polarity 1 [ 105.948133] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 105.948142] xen: --> irq=16 [ 105.948147] Already setup the GSI :16 [ 105.948155] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 105.948173] i915 0000:00:02.0: setting latency timer to 64 [ 106.257101] [drm] MTRR allocation failed. Graphics performance may suffer. [ 106.318984] composite sync not supported [ 106.488426] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 106.488878] [drm] initialized overlay support [ 106.489013] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.501316] composite sync not supported [ 106.511230] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.585871] fbcon: inteldrmfb (fb0) is primary device [ 106.587198] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.617125] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.617129] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.622541] Console: switching to colour frame buffer device 160x50 [ 106.625011] fb0: inteldrmfb frame buffer device [ 106.625011] drm: registered panic notifier [ 106.674422] acpi device:30: registered as cooling_device2 [ 106.677398] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10 [ 106.678382] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 106.678663] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 106.678943] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 106.681091] modprobe used greatest stack depth: 3632 bytes left [ 115.383580] dracut: Starting plymouth daemon [ 115.429847] composite sync not supported [ 116.062508] xen: registering gsi 16 triggering 0 polarity 1 [ 116.062514] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 116.062551] xen: --> irq=16 [ 116.062557] Already setup the GSI :16 [ 116.062579] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 116.084452] sdhci: Secure Digital Host Controller Interface driver [ 116.084498] sdhci: Copyright(c) Pierre Ossman [ 116.126456] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 116.128758] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 116.128837] xen: registering gsi 18 triggering 0 polarity 1 [ 116.128867] xen: --> irq=18 [ 116.128877] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 116.132819] Registered led device: mmc0:: [ 116.134397] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 131.799412] firewire_core: created device fw0: GUID 444fc00012d94c70, S400 [ 133.104764] dracut: Scanning devices sda7 for LVM volume groups [ 133.380718] dracut: Reading all physical volumes. This may take a while... [ 133.382792] dracut: Found volume group "vg0" using metadata type lvm2 [ 143.325625] dracut: 7 logical volume(s) in volume group "vg0" now active [ 143.417889] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 143.510994] dracut: Remounting /dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro [ 143.544636] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 143.585225] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b [ 143.801926] dracut: Loading SELinux policy [ 144.342736] SELinux: 2048 avtab hash slots, 210512 rules. [ 144.664886] SELinux: 2048 avtab hash slots, 210512 rules. [ 145.997495] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats [ 145.997502] SELinux: 77 classes, 210512 rules [ 146.025709] SELinux: Permission read_policy in class security not defined in policy. [ 146.026023] SELinux: the above unknown classes and permissions will be allowed [ 146.026023] SELinux: Completing initialization. [ 146.026023] SELinux: Setting up existing superblocks. [ 146.026023] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 146.026023] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 146.026023] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 146.026023] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 146.026023] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 146.026023] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 146.026023] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 146.026023] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 146.045012] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 146.045012] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 146.045012] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 146.045012] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 146.068415] SELinux: initialized (dev dm-8, type ext4), uses xattr [ 146.105894] type=1403 audit(1291408871.041:2): policy loaded auid=4294967295 ses=4294967295 [ 146.687015] restorecon used greatest stack depth: 3600 bytes left [ 146.972245] dracut: Switching root [ 148.433078] readahead-collector: starting [ 150.747204] udev[408]: starting version 161 [ 151.763232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 152.332329] Linux video capture interface: v2.00 [ 152.427894] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 152.430482] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 152.432985] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 152.433625] uvcvideo: Failed to initialize the device (-5). [ 152.440323] usbcore: registered new interface driver uvcvideo [ 152.441019] USB Video Class driver (v1.0.0) [ 153.831044] wmi: Mapper loaded [ 154.014580] cfg80211: Calling CRDA to update world regulatory domain [ 154.345261] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345329] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345363] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345418] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.345445] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345471] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345515] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345543] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345571] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.346002] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346024] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346090] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346117] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346146] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.346180] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346206] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346242] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346544] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346575] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 154.346604] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346631] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346657] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346683] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346718] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346766] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346793] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346828] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346854] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.346880] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.346919] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.347220] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.347276] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 154.347305] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347331] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347358] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347384] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347411] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347454] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347487] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347517] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347543] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347569] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347605] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347632] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347660] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347713] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.347740] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.348207] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.348236] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.506418] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 154.507037] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 154.513352] xen: registering gsi 17 triggering 0 polarity 1 [ 154.513358] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 154.514010] xen: --> irq=17 [ 154.515084] Already setup the GSI :17 [ 154.516062] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 154.516062] iwlagn 0000:0b:00.0: setting latency timer to 64 [ 154.521583] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 154.567366] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 154.569748] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 154.756009] sky2: driver version 1.28 [ 154.762160] xen: registering gsi 16 triggering 0 polarity 1 [ 154.762166] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 154.763010] xen: --> irq=16 [ 154.763822] Already setup the GSI :16 [ 154.764770] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 154.767238] sky2 0000:09:00.0: setting latency timer to 64 [ 154.767416] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 154.776659] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6 [ 156.353946] Bluetooth: Core ver 2.15 [ 156.359231] NET: Registered protocol family 31 [ 156.360024] Bluetooth: HCI device and connection manager initialized [ 156.360024] Bluetooth: HCI socket layer initialized [ 156.569033] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 156.578429] usbcore: registered new interface driver btusb [ 156.793307] iTCO_vendor_support: vendor-support=0 [ 156.874972] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 156.877518] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 156.880377] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 157.059584] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 157.180515] xen: registering gsi 18 triggering 0 polarity 1 [ 157.180521] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 157.181010] xen: --> irq=18 [ 157.182037] Already setup the GSI :18 [ 157.183021] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 157.185724] r852: driver loaded succesfully [ 157.387499] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 [ 157.894405] xen: registering gsi 21 triggering 0 polarity 1 [ 157.894411] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 157.895075] xen: --> irq=21 [ 157.895936] Already setup the GSI :21 [ 157.896888] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 157.899643] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 158.988157] cfg80211: World regulatory domain updated: [ 158.989015] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 158.989015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.847134] cfg80211: Calling CRDA for country: GB [ 160.074022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 161.611185] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 161.611191] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 161.611196] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) [ 161.611201] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 [ 161.611205] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0 [ 161.611210] ALSA sound/pci/hda/hda_codec.c:4632: inputs: [ 161.611214] ALSA sound/pci/hda/hda_codec.c:4638: [ 161.611785] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) [ 162.492213] cfg80211: Regulatory domain changed to country: GB [ 162.493013] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 162.493013] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 163.788950] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 163.792143] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 163.794706] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 163.798976] audit: name_count maxed, losing inode data: dev=00:05, inode=11782 [ 163.799690] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.799816] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.803318] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.803369] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.805691] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.805753] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.808665] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.808921] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.811368] xen: registering gsi 17 triggering 0 polarity 1 [ 163.811373] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 163.812025] xen: --> irq=17 [ 163.812691] Already setup the GSI :17 [ 163.813676] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 163.915216] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 165.686148] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 169.198131] ip used greatest stack depth: 3488 bytes left [ 169.912335] SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts [ 169.960778] Event-channel device installed. [ 172.164745] EXT4-fs (dm-8): re-mounted. Opts: (null) [ 174.063444] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 176.849172] dmeventd (1025): /proc/1025/oom_adj is deprecated, please use /proc/1025/oom_score_adj instead. [ 178.278183] NET: Registered protocol family 10 [ 178.292650] lo: Disabled Privacy Extensions [ 178.335359] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 188.895215] Bluetooth: L2CAP ver 2.15 [ 188.896016] Bluetooth: L2CAP socket layer initialized [ 189.036115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 189.037059] Bluetooth: BNEP filters: protocol multicast [ 189.070325] Bluetooth: SCO (Voice Link) ver 0.6 [ 189.071010] Bluetooth: SCO socket layer initialized [ 189.287778] Bluetooth: RFCOMM TTY layer initialized [ 189.288014] Bluetooth: RFCOMM socket layer initialized [ 189.288014] Bluetooth: RFCOMM ver 1.11 [ 190.275241] sky2 0000:09:00.0: eth0: enabling interface [ 190.306010] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 190.671870] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 191.713023] btusb_intr_complete: hci0 urb ffff8800cf6fc630 failed to resubmit (1) [ 191.716094] btusb_bulk_complete: hci0 urb ffff8800cf6fc948 failed to resubmit (1) [ 191.718974] btusb_bulk_complete: hci0 urb ffff8800cf6fca50 failed to resubmit (1) [ 194.208998] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 194.601189] XENBUS: Unable to read cpu state [ 194.606842] XENBUS: Unable to read cpu state [ 195.605014] Bridge firewalling registered [ 199.162255] Ebtables v2.0 registered [ 200.146258] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.147480] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 200.200013] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.215545] lo: Disabled Privacy Extensions [ 200.226307] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 228.501223] readahead-collector: sorting [ 228.815859] readahead-collector: finished [-- Attachment #3: Type: TEXT/PLAIN, Size: 16677 bytes --] (XEN) Xen version 4.0.1 (mockbuild@(none)) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) Tue Oct 12 22:05:04 UTC 2010 (XEN) Latest ChangeSet: unavailable (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 0000000000100000 - 00000000df66d800 (usable) (XEN) 00000000df66d800 - 00000000e0000000 (reserved) (XEN) 00000000f8000000 - 00000000fc000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fed18000 - 00000000fed1c000 (reserved) (XEN) 00000000fed20000 - 00000000fed90000 (reserved) (XEN) 00000000feda0000 - 00000000feda6000 (reserved) (XEN) 00000000fee00000 - 00000000fee10000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) ACPI: RSDP 000FBC60, 0024 (r2 DELL ) (XEN) ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D90A1B ASL 61) (XEN) ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624) (XEN) ACPI: FACS DF67E000, 0040 (XEN) ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) (XEN) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D90A1B ASL 47) (XEN) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SLIC DF66F49C, 0176 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D90A1B ASL 61) (XEN) ACPI: SSDT DF66D97E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) (XEN) System RAM: 4086MB (4184112kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2394.062 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) I/O virtualisation disabled (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) Brought up 2 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2ac8000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (967228 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff82ac8000 (XEN) Init. ramdisk: ffffffff82ac8000->ffffffff84ea1a00 (XEN) Phys-Mach map: ffffffff84ea2000->ffffffff856431e0 (XEN) Start info: ffffffff85644000->ffffffff856444b4 (XEN) Page tables: ffffffff85645000->ffffffff85674000 (XEN) Boot stack: ffffffff85674000->ffffffff85675000 (XEN) TOTAL: ffffffff80000000->ffffffff85800000 (XEN) ENTRY ADDRESS: ffffffff81d36200 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 172kB init memory. (XEN) 'h' pressed -> showing installed handlers (XEN) key '%' (ascii '25') => trap to xendbg (XEN) key '*' (ascii '2a') => print all diagnostics (XEN) key '0' (ascii '30') => dump Dom0 registers (XEN) key 'C' (ascii '43') => trigger a crashdump (XEN) key 'H' (ascii '48') => dump heap info (XEN) key 'M' (ascii '4d') => dump MSI state (XEN) key 'N' (ascii '4e') => trigger an NMI (XEN) key 'Q' (ascii '51') => dump PCI devices (XEN) key 'R' (ascii '52') => reboot machine (XEN) key 'a' (ascii '61') => dump timer queues (XEN) key 'c' (ascii '63') => dump ACPI Cx structures (XEN) key 'd' (ascii '64') => dump registers (XEN) key 'e' (ascii '65') => dump evtchn info (XEN) key 'g' (ascii '67') => print grant table usage (XEN) key 'h' (ascii '68') => show this message (XEN) key 'i' (ascii '69') => dump interrupt bindings (XEN) key 'm' (ascii '6d') => memory info (XEN) key 'n' (ascii '6e') => NMI statistics (XEN) key 'q' (ascii '71') => dump domain (and guest debug) info (XEN) key 'r' (ascii '72') => dump run queues (XEN) key 's' (ascii '73') => dump softtsc stats (XEN) key 't' (ascii '74') => display multi-cpu clock info (XEN) key 'u' (ascii '75') => dump numa info (XEN) key 'v' (ascii '76') => dump Intel's VMCS (XEN) key 'z' (ascii '7a') => print ioapic info (XEN) 'e' pressed -> dumping event-channel info (XEN) Event channel information for domain 0: (XEN) Polling vCPUs: {} (XEN) port [p/m] (XEN) 1 [0/0]: s=5 n=0 v=0 x=0 (XEN) 2 [0/0]: s=6 n=0 x=0 (XEN) 3 [0/0]: s=6 n=0 x=0 (XEN) 4 [0/0]: s=5 n=0 v=1 x=0 (XEN) 5 [0/0]: s=6 n=0 x=0 (XEN) 6 [0/0]: s=5 n=1 v=0 x=0 (XEN) 7 [0/0]: s=6 n=1 x=0 (XEN) 8 [0/0]: s=6 n=1 x=0 (XEN) 9 [0/0]: s=5 n=1 v=1 x=0 (XEN) 10 [0/0]: s=6 n=1 x=0 (XEN) 11 [0/0]: s=3 n=1 d=0 p=25 x=0 (XEN) 12 [0/0]: s=4 n=0 p=9 x=0 (XEN) 13 [0/1]: s=5 n=0 v=2 x=0 (XEN) 14 [0/0]: s=4 n=0 p=17 x=0 (XEN) 15 [0/0]: s=4 n=0 p=14 x=0 (XEN) 16 [0/0]: s=4 n=0 p=15 x=0 (XEN) 17 [0/0]: s=4 n=0 p=22 x=0 (XEN) 18 [0/0]: s=4 n=0 p=20 x=0 (XEN) 19 [0/0]: s=4 n=0 p=21 x=0 (XEN) 20 [0/0]: s=4 n=0 p=12 x=0 (XEN) 21 [0/0]: s=4 n=0 p=1 x=0 (XEN) 22 [0/0]: s=4 n=0 p=8 x=0 (XEN) 23 [0/0]: s=4 n=0 p=16 x=0 (XEN) 24 [0/0]: s=4 n=0 p=18 x=0 (XEN) 25 [0/0]: s=3 n=0 d=0 p=11 x=0 (XEN) 26 [0/0]: s=5 n=0 v=3 x=0 (XEN) PCI-MSI interrupt information: (XEN) ==== PCI devices ==== (XEN) 02:09.3 - dom 0 - MSIs < > (XEN) 02:09.2 - dom 0 - MSIs < > (XEN) 02:09.1 - dom 0 - MSIs < > (XEN) 02:09.0 - dom 0 - MSIs < > (XEN) 0b:00.0 - dom 0 - MSIs < > (XEN) 09:00.0 - dom 0 - MSIs < > (XEN) 00:1f.3 - dom 0 - MSIs < > (XEN) 00:1f.2 - dom 0 - MSIs < > (XEN) 00:1f.1 - dom 0 - MSIs < > (XEN) 00:1f.0 - dom 0 - MSIs < > (XEN) 00:1e.0 - dom 0 - MSIs < > (XEN) 00:1d.7 - dom 0 - MSIs < > (XEN) 00:1d.2 - dom 0 - MSIs < > (XEN) 00:1d.1 - dom 0 - MSIs < > (XEN) 00:1d.0 - dom 0 - MSIs < > (XEN) 00:1c.4 - dom 0 - MSIs < > (XEN) 00:1c.1 - dom 0 - MSIs < > (XEN) 00:1c.0 - dom 0 - MSIs < > (XEN) 00:1b.0 - dom 0 - MSIs < > (XEN) 00:1a.7 - dom 0 - MSIs < > (XEN) 00:1a.1 - dom 0 - MSIs < > (XEN) 00:1a.0 - dom 0 - MSIs < > (XEN) 00:02.1 - dom 0 - MSIs < > (XEN) 00:02.0 - dom 0 - MSIs < > (XEN) 00:00.0 - dom 0 - MSIs < > (XEN) Guest interrupt information: (XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0 type=IO-APIC-edge status=00000000 mapped, unbound (XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(----), (XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2 type=XT-PIC status=00000000 mapped, unbound (XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:30 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:38 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:40 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:48 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:50 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:58 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(----), (XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:60 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(----), (XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:68 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:70 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:78 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 12(----), (XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000003 vec:88 type=IO-APIC-edge status=00000002 mapped, unbound (XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:90 type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 14(----), (XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:98 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 15(----), (XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(----), (XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000001 vec:a8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 17(----), (XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:c8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(----), (XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000001 vec:b8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 20(----), (XEN) IRQ: 21 affinity:00000000,00000000,00000000,00000001 vec:c0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 21(----), (XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:b0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 22(----), (XEN) IO-APIC interrupt information: (XEN) IRQ 0 Vec240: (XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 1 Vec 40: (XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 3 Vec 48: (XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 4 Vec 56: (XEN) Apic 0x00, Pin 4: vector=56, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 5 Vec 64: (XEN) Apic 0x00, Pin 5: vector=64, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 6 Vec 72: (XEN) Apic 0x00, Pin 6: vector=72, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 7 Vec 80: (XEN) Apic 0x00, Pin 7: vector=80, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 8 Vec 88: (XEN) Apic 0x00, Pin 8: vector=88, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 9 Vec 96: (XEN) Apic 0x00, Pin 9: vector=96, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 10 Vec104: (XEN) Apic 0x00, Pin 10: vector=104, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 11 Vec112: (XEN) Apic 0x00, Pin 11: vector=112, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 12 Vec120: (XEN) Apic 0x00, Pin 12: vector=120, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 13 Vec136: (XEN) Apic 0x00, Pin 13: vector=136, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:3 (XEN) IRQ 14 Vec144: (XEN) Apic 0x00, Pin 14: vector=144, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 15 Vec152: (XEN) Apic 0x00, Pin 15: vector=152, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 16 Vec160: (XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 17 Vec168: (XEN) Apic 0x00, Pin 17: vector=168, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 18 Vec200: (XEN) Apic 0x00, Pin 18: vector=200, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 20 Vec184: (XEN) Apic 0x00, Pin 20: vector=184, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 21 Vec192: (XEN) Apic 0x00, Pin 21: vector=192, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) IRQ 22 Vec176: (XEN) Apic 0x00, Pin 22: vector=176, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #2 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #2...... (XEN) .... register #00: 00000000 (XEN) ....... : physical APIC id: 00 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 38 (XEN) 05 001 01 0 0 0 0 0 1 1 40 (XEN) 06 001 01 0 0 0 0 0 1 1 48 (XEN) 07 001 01 0 0 0 0 0 1 1 50 (XEN) 08 001 01 0 0 0 0 0 1 1 58 (XEN) 09 001 01 0 1 0 0 0 1 1 60 (XEN) 0a 001 01 0 0 0 0 0 1 1 68 (XEN) 0b 001 01 0 0 0 0 0 1 1 70 (XEN) 0c 001 01 0 0 0 0 0 1 1 78 (XEN) 0d 003 03 1 0 0 0 0 1 1 88 (XEN) 0e 001 01 0 0 0 0 0 1 1 90 (XEN) 0f 001 01 0 0 0 0 0 1 1 98 (XEN) 10 001 01 0 1 0 1 0 1 1 A0 (XEN) 11 001 01 0 1 0 1 0 1 1 A8 (XEN) 12 001 01 0 1 0 1 0 1 1 C8 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 001 01 0 1 0 1 0 1 1 B8 (XEN) 15 001 01 0 1 0 1 0 1 1 C0 (XEN) 16 001 01 0 1 0 1 0 1 1 B0 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ56 -> 0:4 (XEN) IRQ64 -> 0:5 (XEN) IRQ72 -> 0:6 (XEN) IRQ80 -> 0:7 (XEN) IRQ88 -> 0:8 (XEN) IRQ96 -> 0:9 (XEN) IRQ104 -> 0:10 (XEN) IRQ112 -> 0:11 (XEN) IRQ120 -> 0:12 (XEN) IRQ136 -> 0:13 (XEN) IRQ144 -> 0:14 (XEN) IRQ152 -> 0:15 (XEN) IRQ160 -> 0:16 (XEN) IRQ168 -> 0:17 (XEN) IRQ200 -> 0:18 (XEN) IRQ184 -> 0:20 (XEN) IRQ192 -> 0:21 (XEN) IRQ176 -> 0:22 (XEN) .................................... done. [-- Attachment #4: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-08 22:50 ` M A Young @ 2010-12-09 1:22 ` Konrad Rzeszutek Wilk 2010-12-14 17:02 ` Konrad Rzeszutek Wilk 1 sibling, 0 replies; 13+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-12-09 1:22 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On Wed, Dec 08, 2010 at 10:50:52PM +0000, M A Young wrote: > Actually, I might have sent the wrong log files in my earlier post. > > Here are the kernel dmesg output and debugkeys output from a nomsi boot. Oooh, so it does boot with nomsi! OK, that narrows it down - let me think about this a bit. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-08 22:50 ` M A Young 2010-12-09 1:22 ` Konrad Rzeszutek Wilk @ 2010-12-14 17:02 ` Konrad Rzeszutek Wilk 2010-12-15 0:47 ` M A Young 1 sibling, 1 reply; 13+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-12-14 17:02 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On Wed, Dec 08, 2010 at 10:50:52PM +0000, M A Young wrote: > Actually, I might have sent the wrong log files in my earlier post. > > Here are the kernel dmesg output and debugkeys output from a nomsi boot. Can you send me the lspci -vvv and lspci - n try this patch below with MSI enabled. The only thing it does it reverse the order of IRQ being initialized from the high to low.. which should _not_ be a problem unless the AHCI driver has some issues with a high number. commit be72548ffe8618c3141c050400306b93f40a107a Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Date: Tue Dec 14 11:43:40 2010 -0500 Revert "xen: Find an unbound irq number in reverse order (high to low)." This reverts commit 482839e7b96098f678d0404ec4dd321419ab3ea7. Conflicts: drivers/xen/events.c diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 0380664..8889e7f 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -401,11 +401,9 @@ static int find_unbound_irq(void) struct irq_desc *desc; int start = get_nr_hw_irqs(); - if (start == nr_irqs) - goto no_irqs; /* nr_irqs is a magic value. Must not use it.*/ - for (irq = nr_irqs-1; irq > start; irq--) { + for (irq = start; irq < nr_irqs; irq++) { desc = irq_to_desc(irq); /* only 0->15 have init'd desc; handle irq > 16 */ if (desc == NULL) @@ -414,11 +412,8 @@ static int find_unbound_irq(void) break; if (desc->chip != &xen_dynamic_chip) continue; - if (irq_info[irq].type == IRQT_UNBOUND) - break; } - - if (irq == start) + if (irq == nr_irqs) goto no_irqs; desc = irq_to_desc_alloc_node(irq, -1); > > Michael Young > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.5.1 20101130 (Red Hat 4.5.1-6) (GCC) ) #1 SMP Thu Dec 2 16:56:26 UTC 2010 > [ 0.000000] Command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi > [ 0.000000] xen_release_chunk: looking at area pfn e0000-f423c: 82492 pages freed > [ 0.000000] released 82492 pages of unused memory > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) > [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable) > [ 0.000000] Xen: 00000000df66d800 - 00000000e0000000 (reserved) > [ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] Xen: 00000000fed18000 - 00000000fed1c000 (reserved) > [ 0.000000] Xen: 00000000fed20000 - 00000000fed90000 (reserved) > [ 0.000000] Xen: 00000000feda0000 - 00000000feda6000 (reserved) > [ 0.000000] Xen: 00000000fee00000 - 00000000fee10000 (reserved) > [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 000000013423c000 (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.4 present. > [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17 10/27/2009 > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x13423c max_arch_pfn = 0x400000000 > [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000 > [ 0.000000] initial memory mapped : 0 - 05fff000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000 > [ 0.000000] 0000000000 - 00df66d000 page 4k > [ 0.000000] kernel direct mapping tables up to df66d000 @ 58fe000-5fff000 > [ 0.000000] init_memory_mapping: 0000000100000000-000000013423c000 > [ 0.000000] 0100000000 - 013423c000 page 4k > [ 0.000000] kernel direct mapping tables up to 13423c000 @ decc5000-df66d000 > [ 0.000000] RAMDISK: 02ac8000 - 04ea2000 > [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) > [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) > [ 0.000000] ACPI: FACS 00000000df67e000 00040 > [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) > [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) > [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) > [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-000000013423c000 > [ 0.000000] Initmem setup node 0 0000000000000000-000000013423c000 > [ 0.000000] NODE_DATA [00000000df658800 - 00000000df66d7ff] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x0013423c > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000df66d > [ 0.000000] 0: 0x00100000 -> 0x0013423c > [ 0.000000] On node 0 totalpages: 1128504 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 6 pages reserved > [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31 > [ 0.000000] Normal zone: 2920 pages used for memmap > [ 0.000000] Normal zone: 210644 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 272 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 > [ 0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 > [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 > [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 > [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 > [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 > [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 > [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 > [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 > [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 > [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 > [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.0.1 (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800dee7d000 s1920512 r8192 d20992 u1949696 > [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u1949696 alloc=476*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1111242 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Placing 64MB software IO TLB between ffff8800d6200000 - ffff8800da200000 > [ 0.000000] software IO TLB at phys 0xd6200000 - 0xda200000 > [ 0.000000] Memory: 3446248k/5048560k available (4849k kernel code, 534544k absent, 1067768k reserved, 6795k data, 2744k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU lockdep checking is enabled. > [ 0.000000] RCU-based detection of stalled CPUs is disabled. > [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 > [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 > [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 > [ 0.000000] xen: --> irq=9 > [ 0.000000] xen: acpi sci 9 > [ 0.000000] xen: --> irq=1 > [ 0.000000] xen: --> irq=2 > [ 0.000000] xen: --> irq=3 > [ 0.000000] xen: --> irq=4 > [ 0.000000] xen: --> irq=5 > [ 0.000000] xen: --> irq=6 > [ 0.000000] xen: --> irq=7 > [ 0.000000] xen: --> irq=8 > [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 > [ 0.000000] xen: --> irq=9 > [ 0.000000] xen: --> irq=10 > [ 0.000000] xen: --> irq=11 > [ 0.000000] xen: --> irq=12 > [ 0.000000] xen: --> irq=13 > [ 0.000000] xen: --> irq=14 > [ 0.000000] xen: --> irq=15 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 6367 kB > [ 0.000000] per task-struct memory footprint: 2688 bytes > [ 0.000000] allocated 45875200 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups > [ 0.000000] ODEBUG: 11 of 11 active objects replaced > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 2394.062 MHz processor. > [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.12 BogoMIPS (lpj=2394062) > [ 0.000999] pid_max: default: 32768 minimum: 301 > [ 0.000999] Security Framework initialized > [ 0.000999] SELinux: Initializing. > [ 0.000999] SELinux: Starting in permissive mode > [ 0.003293] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.008310] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.010522] Mount-cache hash table entries: 256 > [ 0.012437] Initializing cgroup subsys ns > [ 0.012457] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. > [ 0.012469] Initializing cgroup subsys cpuacct > [ 0.012501] Initializing cgroup subsys memory > [ 0.012651] Initializing cgroup subsys devices > [ 0.012661] Initializing cgroup subsys freezer > [ 0.012669] Initializing cgroup subsys net_cls > [ 0.012677] Initializing cgroup subsys blkio > [ 0.012944] CPU: Physical Processor ID: 0 > [ 0.012950] CPU: Processor Core ID: 0 > [ 0.012958] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. > [ 0.013701] ACPI: Core revision 20101013 > [ 0.040046] ftrace: allocating 24696 entries in 97 pages > [ 0.045474] NMI watchdog failed to create perf event on cpu0: fffffffffffffffe > [ 0.046200] installing Xen timer for CPU 1 > [ 0.046316] lockdep: fixing up alternatives. > [ 0.046692] NMI watchdog failed to create perf event on cpu1: fffffffffffffffe > [ 0.046703] Brought up 2 CPUs > [ 0.046707] sizeof(vma)=184 bytes > [ 0.046710] sizeof(page)=56 bytes > [ 0.046712] sizeof(inode)=1088 bytes > [ 0.046715] sizeof(dentry)=264 bytes > [ 0.046717] sizeof(ext3inode)=1552 bytes > [ 0.046719] sizeof(ext4inode)=1912 bytes > [ 0.046722] sizeof(buffer_head)=104 bytes > [ 0.046724] sizeof(skbuff)=240 bytes > [ 0.046726] sizeof(task_struct)=9104 bytes > [ 0.047720] devtmpfs: initialized > [ 0.057506] atomic64 test passed for x86-64 platform with CX8 and with SSE > [ 0.057541] Grant table initialized > [ 0.057590] Time: 20:38:44 Date: 12/03/10 > [ 0.057999] NET: Registered protocol family 16 > [ 0.060248] ACPI: bus type pci registered > [ 0.060864] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) > [ 0.060875] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > [ 0.079750] PCI: Using configuration type 1 for base access > [ 0.091103] bio: create slab <bio-0> at 0 > [ 0.094391] ACPI: EC: Look up EC in DSDT > [ 0.115142] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) > [ 0.115999] ACPI: Dynamic OEM Table Load: > [ 0.115999] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) > [ 0.116306] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) > [ 0.116999] ACPI: Dynamic OEM Table Load: > [ 0.116999] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) > [ 0.117113] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) > [ 0.117999] ACPI: Dynamic OEM Table Load: > [ 0.117999] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) > [ 0.118068] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) > [ 0.118999] ACPI: Dynamic OEM Table Load: > [ 0.118999] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) > [ 0.118999] ACPI: Interpreter enabled > [ 0.118999] ACPI: (supports S0 S3 S4 S5) > [ 0.118999] ACPI: Using IOAPIC for interrupt routing > [ 0.252999] ACPI: No dock devices found. > [ 0.252999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.279999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] > [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] > [ 0.329999] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x120000000-0x317ffffff] conflicts with System RAM [mem 0x100000000-0x13423bfff] > [ 0.329999] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 > [ 0.330103] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 > [ 0.330185] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] > [ 0.330233] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.330265] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] > [ 0.330490] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 > [ 0.330559] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] > [ 0.330999] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 > [ 0.330999] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] > [ 0.331056] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 > [ 0.331247] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] > [ 0.331458] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 > [ 0.331536] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] > [ 0.331855] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.331869] pci 0000:00:1a.7: PME# disabled > [ 0.331972] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 > [ 0.331999] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] > [ 0.332030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.332043] pci 0000:00:1b.0: PME# disabled > [ 0.332146] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 > [ 0.332453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.332466] pci 0000:00:1c.0: PME# disabled > [ 0.332578] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 > [ 0.332883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.332896] pci 0000:00:1c.1: PME# disabled > [ 0.332999] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 > [ 0.333059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.333073] pci 0000:00:1c.4: PME# disabled > [ 0.333207] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 > [ 0.333400] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] > [ 0.333555] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 > [ 0.333746] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] > [ 0.333900] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 > [ 0.333999] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] > [ 0.334105] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 > [ 0.334184] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] > [ 0.334501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.334515] pci 0000:00:1d.7: PME# disabled > [ 0.334597] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 > [ 0.334903] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 > [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO > [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO > [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) > [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) > [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) > [ 0.335089] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 > [ 0.335143] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] > [ 0.335180] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] > [ 0.335218] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] > [ 0.335256] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] > [ 0.335293] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] > [ 0.335507] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 > [ 0.335595] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] > [ 0.335632] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] > [ 0.335670] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] > [ 0.335707] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] > [ 0.335745] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] > [ 0.335783] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] > [ 0.335956] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.335969] pci 0000:00:1f.2: PME# disabled > [ 0.335999] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 > [ 0.335999] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] > [ 0.335999] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] > [ 0.336324] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 > [ 0.336408] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] > [ 0.336452] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] > [ 0.336760] pci 0000:09:00.0: supports D1 D2 > [ 0.336763] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.336778] pci 0000:09:00.0: PME# disabled > [ 0.336999] pci 0000:00:1c.0: PCI bridge to [bus 09-09] > [ 0.336999] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] > [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] > [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > [ 0.336999] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280 > [ 0.336999] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] > [ 0.337067] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold > [ 0.337106] pci 0000:0b:00.0: PME# disabled > [ 0.337449] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] > [ 0.337467] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) > [ 0.337480] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] > [ 0.337504] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > [ 0.337717] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] > [ 0.337734] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] > [ 0.337747] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] > [ 0.337770] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] > [ 0.337999] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00 > [ 0.337999] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff] > [ 0.338031] pci 0000:02:09.0: supports D1 D2 > [ 0.338034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.338085] pci 0000:02:09.0: PME# disabled > [ 0.338160] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805 > [ 0.338229] pci 0000:02:09.1: reg 10: [mem 0xfe3ff500-0xfe3ff5ff] > [ 0.338532] pci 0000:02:09.1: supports D1 D2 > [ 0.338535] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.338550] pci 0000:02:09.1: PME# disabled > [ 0.338624] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880 > [ 0.338694] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff] > [ 0.338995] pci 0000:02:09.2: supports D1 D2 > [ 0.338998] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.338999] pci 0000:02:09.2: PME# disabled > [ 0.339070] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880 > [ 0.339140] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff] > [ 0.339441] pci 0000:02:09.3: supports D1 D2 > [ 0.339444] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.339459] pci 0000:02:09.3: PME# disabled > [ 0.339654] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) > [ 0.339672] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) > [ 0.339685] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] > [ 0.339709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > [ 0.339714] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > [ 0.339718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > [ 0.339723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > [ 0.339727] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) > [ 0.339735] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) > [ 0.339739] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) > [ 0.339744] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) > [ 0.339758] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) > [ 0.339762] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) > [ 0.339767] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) > [ 0.339771] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) > [ 0.339776] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) > [ 0.339876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.345616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.345999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > [ 0.375866] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) > [ 0.376592] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 > [ 0.377418] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 > [ 0.377999] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. > [ 0.378588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > [ 0.378999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > [ 0.379588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) > [ 0.379999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > [ 0.380062] HEST: Table is not found! > [ 0.380149] xen_balloon: Initialising balloon driver. > [ 0.380305] last_pfn = 0x13423c max_arch_pfn = 0x400000000 > [ 0.386887] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.386999] vgaarb: loaded > [ 0.387816] SCSI subsystem initialized > [ 0.388214] libata version 3.00 loaded. > [ 0.388719] usbcore: registered new interface driver usbfs > [ 0.388860] usbcore: registered new interface driver hub > [ 0.389098] usbcore: registered new device driver usb > [ 0.389507] PCI: Using ACPI for IRQ routing > [ 0.389507] PCI: pci_cache_line_size set to 64 bytes > [ 0.389861] reserve RAM buffer: 000000000009f000 - 000000000009ffff > [ 0.389876] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff > [ 0.389884] reserve RAM buffer: 000000013423c000 - 0000000137ffffff > [ 0.390943] NetLabel: Initializing > [ 0.390949] NetLabel: domain hash size = 128 > [ 0.390954] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.390999] NetLabel: unlabeled traffic allowed by default > [ 0.391982] Switching to clocksource xen > [ 0.513144] pnp: PnP ACPI init > [ 0.513315] ACPI: bus type pnp registered > [ 0.564054] pnp 00:00: [bus 00-ff] > [ 0.564054] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.564054] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.575063] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.575068] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.575072] pnp 00:00: [mem 0x000d0000-0x000dffff window] > [ 0.575077] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] > [ 0.575081] pnp 00:00: [mem 0xfc000000-0xfebfffff window] > [ 0.575085] pnp 00:00: [mem 0xfec10000-0xfecfffff window] > [ 0.575089] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] > [ 0.575093] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] > [ 0.575097] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] > [ 0.575101] pnp 00:00: [mem 0xfee10000-0xff9fffff window] > [ 0.575106] pnp 00:00: [mem 0xffc00000-0xffdfffff window] > [ 0.575110] pnp 00:00: [mem 0x120000000-0x317ffffff window] > [ 0.575776] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > [ 0.575877] pnp 00:01: [io 0x004e-0x004f] > [ 0.575882] pnp 00:01: [io 0x0068-0x006f] > [ 0.575886] pnp 00:01: [mem 0xff800000-0xff8fffff] > [ 0.575890] pnp 00:01: [mem 0xffc00000-0xffcfffff] > [ 0.576355] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.576498] xen: registering gsi 12 triggering 1 polarity 0 > [ 0.576503] xen_map_pirq_gsi: returning irq 12 for gsi 12 > [ 0.576510] xen: --> irq=12 > [ 0.576527] pnp 00:02: [irq 12] > [ 0.576800] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) > [ 0.576939] pnp 00:03: [io 0x0060] > [ 0.576943] pnp 00:03: [io 0x0064] > [ 0.576947] pnp 00:03: [io 0x0062] > [ 0.576950] pnp 00:03: [io 0x0066] > [ 0.576954] xen: registering gsi 1 triggering 1 polarity 0 > [ 0.576958] xen_map_pirq_gsi: returning irq 1 for gsi 1 > [ 0.576965] xen: --> irq=1 > [ 0.576972] pnp 00:03: [irq 1] > [ 0.577267] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) > [ 0.577413] pnp 00:04: [io 0x0070-0x0071] > [ 0.577416] xen: registering gsi 8 triggering 1 polarity 0 > [ 0.577420] xen_map_pirq_gsi: returning irq 8 for gsi 8 > [ 0.577427] xen: --> irq=8 > [ 0.577435] pnp 00:04: [irq 8] > [ 0.577447] pnp 00:04: [io 0x0072-0x0077] > [ 0.577710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.577884] pnp 00:05: [io 0x0061] > [ 0.577888] pnp 00:05: [io 0x0063] > [ 0.577892] pnp 00:05: [io 0x0065] > [ 0.577895] pnp 00:05: [io 0x0067] > [ 0.578188] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.578332] pnp 00:06: [io 0x0c80-0x0cff] > [ 0.578836] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.579009] pnp 00:07: [dma 4] > [ 0.579013] pnp 00:07: [io 0x0000-0x000f] > [ 0.579016] pnp 00:07: [io 0x0080-0x0085] > [ 0.579020] pnp 00:07: [io 0x0087-0x008f] > [ 0.579023] pnp 00:07: [io 0x00c0-0x00df] > [ 0.579026] pnp 00:07: [io 0x0010-0x001f] > [ 0.579030] pnp 00:07: [io 0x0090-0x0091] > [ 0.579030] pnp 00:07: [io 0x0093-0x009f] > [ 0.579311] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.579453] pnp 00:08: [io 0x00f0-0x00ff] > [ 0.579457] xen: registering gsi 13 triggering 1 polarity 0 > [ 0.579461] xen_map_pirq_gsi: returning irq 13 for gsi 13 > [ 0.579468] xen: --> irq=13 > [ 0.579476] pnp 00:08: [irq 13] > [ 0.579772] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.580167] pnp 00:09: [mem 0xfed00000-0xfed003ff] > [ 0.580745] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) > [ 0.581487] pnp 00:0a: [io 0x0900-0x097f] > [ 0.581487] pnp 00:0a: [io 0x0092] > [ 0.581487] pnp 00:0a: [io 0x00b2-0x00b3] > [ 0.581487] pnp 00:0a: [io 0x0020-0x0021] > [ 0.581487] pnp 00:0a: [io 0x00a0-0x00a1] > [ 0.581487] pnp 00:0a: [irq 0 disabled] > [ 0.581487] pnp 00:0a: [io 0x04d0-0x04d1] > [ 0.582587] pnp 00:0a: [io 0x1000-0x1005] > [ 0.582591] pnp 00:0a: [io 0x1008-0x100f] > [ 0.582738] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.582750] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.583328] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.583471] pnp 00:0b: [io 0xf400-0xf4fe] > [ 0.583475] pnp 00:0b: [io 0x0086] > [ 0.583479] pnp 00:0b: [io 0x1006-0x1007] > [ 0.583483] pnp 00:0b: [io 0x100a-0x1059] > [ 0.583486] pnp 00:0b: [io 0x1060-0x107f] > [ 0.583490] pnp 00:0b: [io 0x1080-0x10bf] > [ 0.583494] pnp 00:0b: [io 0x10c0-0x10df] > [ 0.583497] pnp 00:0b: [io 0x1010-0x102f] > [ 0.583501] pnp 00:0b: [io 0x0809] > [ 0.583647] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.583659] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.583669] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.583680] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > [ 0.584286] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.661805] pnp 00:0c: [mem 0x00000000-0x0009efff] > [ 0.661805] pnp 00:0c: [mem 0x0009f000-0x0009ffff] > [ 0.661805] pnp 00:0c: [mem 0x000c0000-0x000cffff] > [ 0.661805] pnp 00:0c: [mem 0x000e0000-0x000fffff] > [ 0.661805] pnp 00:0c: [mem 0x00100000-0xdf66d7ff] > [ 0.661805] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff] > [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdf7fffff] > [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdfefffff] > [ 0.661805] pnp 00:0c: [mem 0xffe00000-0xffffffff] > [ 0.661805] pnp 00:0c: [mem 0xffa00000-0xffbfffff] > [ 0.661805] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] > [ 0.661805] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] > [ 0.661805] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] > [ 0.666782] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] > [ 0.666786] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] > [ 0.666790] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] > [ 0.666794] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] > [ 0.666798] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] > [ 0.666802] pnp 00:0c: [mem 0xf8000000-0xfbffffff] > [ 0.667567] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.668287] pnp: PnP ACPI: found 13 devices > [ 0.668295] ACPI: ACPI bus type pnp unregistered > [ 0.668353] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved > [ 0.668365] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved > [ 0.668418] system 00:06: [io 0x0c80-0x0cff] could not be reserved > [ 0.668460] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved > [ 0.668510] system 00:0a: [io 0x0900-0x097f] has been reserved > [ 0.668521] system 00:0a: [io 0x04d0-0x04d1] has been reserved > [ 0.668559] system 00:0b: [io 0xf400-0xf4fe] has been reserved > [ 0.668570] system 00:0b: [io 0x1080-0x10bf] has been reserved > [ 0.668581] system 00:0b: [io 0x10c0-0x10df] has been reserved > [ 0.668591] system 00:0b: [io 0x0809] has been reserved > [ 0.668654] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved > [ 0.668672] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved > [ 0.668689] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > [ 0.668706] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > [ 0.668723] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be reserved > [ 0.668735] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved > [ 0.668745] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved > [ 0.668762] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be reserved > [ 0.668773] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved > [ 0.668784] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved > [ 0.668801] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved > [ 0.668812] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved > [ 0.668823] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved > [ 0.668833] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved > [ 0.668844] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved > [ 0.668855] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved > [ 0.668866] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved > [ 0.668877] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved > [ 0.668887] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.694225] PM-Timer failed consistency check (0x0xffffff) - aborting. > [ 0.694610] pci 0000:00:1c.0: BAR 15: assigned [mem 0xff600000-0xff7fffff 64bit pref] > [ 0.694636] pci 0000:00:1c.1: BAR 15: assigned [mem 0xff400000-0xff5fffff 64bit pref] > [ 0.694649] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff] > [ 0.694660] pci 0000:00:1c.0: PCI bridge to [bus 09-09] > [ 0.694672] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] > [ 0.694694] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] > [ 0.694711] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff7fffff 64bit pref] > [ 0.694740] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] > [ 0.694751] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] > [ 0.694773] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] > [ 0.694790] pci 0000:00:1c.1: bridge window [mem 0xff400000-0xff5fffff 64bit pref] > [ 0.694818] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] > [ 0.694830] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] > [ 0.694851] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] > [ 0.694868] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] > [ 0.694897] pci 0000:00:1e.0: PCI bridge to [bus 02-02] > [ 0.694903] pci 0000:00:1e.0: bridge window [io disabled] > [ 0.694925] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] > [ 0.694941] pci 0000:00:1e.0: bridge window [mem pref disabled] > [ 0.694992] xen: registering gsi 16 triggering 0 polarity 1 > [ 0.695042] xen: --> irq=16 > [ 0.695052] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.695072] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.695099] xen: registering gsi 17 triggering 0 polarity 1 > [ 0.695122] xen: --> irq=17 > [ 0.695127] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.695145] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.695171] xen: registering gsi 16 triggering 0 polarity 1 > [ 0.695175] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 0.695182] xen: --> irq=16 > [ 0.695185] Already setup the GSI :16 > [ 0.695190] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.695208] pci 0000:00:1c.4: setting latency timer to 64 > [ 0.695237] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.695246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.695250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.695253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.695256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.695260] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] > [ 0.695263] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] > [ 0.695266] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] > [ 0.695269] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] > [ 0.695273] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] > [ 0.695276] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] > [ 0.695279] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] > [ 0.695282] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] > [ 0.695286] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] > [ 0.695289] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] > [ 0.695293] pci_bus 0000:09: resource 2 [mem 0xff600000-0xff7fffff 64bit pref] > [ 0.695296] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] > [ 0.695299] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff] > [ 0.695303] pci_bus 0000:0b: resource 2 [mem 0xff400000-0xff5fffff 64bit pref] > [ 0.695306] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] > [ 0.695309] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff] > [ 0.695313] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] > [ 0.695316] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] > [ 0.695319] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] > [ 0.695322] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] > [ 0.695326] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.695329] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.695332] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff] > [ 0.695335] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] > [ 0.695339] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] > [ 0.695342] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] > [ 0.695345] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] > [ 0.695348] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff] > [ 0.695352] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff] > [ 0.695355] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff] > [ 0.695620] NET: Registered protocol family 2 > [ 0.696895] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.702432] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > [ 0.708388] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) > [ 0.711010] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.711010] TCP reno registered > [ 0.715466] UDP hash table entries: 4096 (order: 7, 786432 bytes) > [ 0.717423] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes) > [ 0.719200] NET: Registered protocol family 1 > [ 0.719302] pci 0000:00:02.0: Boot video device > [ 0.720070] PCI: CLS 64 bytes, default 64 > [ 0.720814] Trying to unpack rootfs image as initramfs... > [ 1.119817] Freeing initrd memory: 36712k freed > [ 1.218370] DMA-API: preallocated 32768 debug entries > [ 1.218386] DMA-API: debugging enabled by kernel config > [ 1.218628] Simple Boot Flag at 0x79 set to 0x1 > [ 1.222512] audit: initializing netlink socket (disabled) > [ 1.222603] type=2000 audit(1291408726.062:1): initialized > [ 1.238278] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.265522] VFS: Disk quotas dquot_6.5.2 > [ 1.266072] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.271813] msgmni has been set to 6802 > [ 1.272678] SELinux: Registering netfilter hooks > [ 1.274613] cryptomgr_test used greatest stack depth: 5448 bytes left > [ 1.275406] alg: No test for stdrng (krng) > [ 1.275771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 1.275815] io scheduler noop registered > [ 1.275822] io scheduler deadline registered > [ 1.276284] io scheduler cfq registered (default) > [ 1.276292] list_sort_test: start testing list_sort() > [ 1.280781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.281008] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.281008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 1.284654] acpiphp: Slot [1] registered > [ 1.285228] pci-stub: invalid id string "" > [ 1.287390] ACPI: AC Adapter [AC] (on-line) > [ 1.288364] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 > [ 1.289760] ACPI: Lid Switch [LID] > [ 1.290137] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > [ 1.290197] ACPI: Power Button [PBTN] > [ 1.290648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 > [ 1.290670] ACPI: Sleep Button [SBTN] > [ 1.293175] ACPI: acpi_idle registered with cpuidle > [ 1.294827] Marking TSC unstable due to TSC halts in idle > [ 1.319147] thermal LNXTHERM:00: registered as thermal_zone0 > [ 1.319147] ACPI: Thermal Zone [THM] (47 C) > [ 1.319147] ERST: Table is not found! > [ 1.400177] hpet_acpi_add: no address or irqs in _CRS > [ 1.400672] Non-volatile memory driver v1.3 > [ 1.400679] Linux agpgart interface v0.103 > [ 1.401141] agpgart-intel 0000:00:00.0: Intel 965GM Chipset > [ 1.402701] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable > [ 1.404490] agpgart-intel 0000:00:00.0: detected 8192K stolen memory > [ 1.411011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 > [ 1.411818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.421172] ACPI: Battery Slot [BAT0] (battery present) > [ 1.439428] brd: module loaded > [ 1.446285] loop: module loaded > [ 1.447289] ahci 0000:00:1f.2: version 3.0 > [ 1.447326] xen: registering gsi 17 triggering 0 polarity 1 > [ 1.447344] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 1.447351] xen: --> irq=17 > [ 1.447357] Already setup the GSI :17 > [ 1.447363] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 1.447710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode > [ 1.447720] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems > [ 1.447740] ahci 0000:00:1f.2: setting latency timer to 64 > [ 1.453250] scsi0 : ahci > [ 1.454595] scsi1 : ahci > [ 1.455304] scsi2 : ahci > [ 1.456260] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 > [ 1.456260] ata2: DUMMY > [ 1.456260] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 17 > [ 1.457680] ata_piix 0000:00:1f.1: version 2.13 > [ 1.457708] xen: registering gsi 16 triggering 0 polarity 1 > [ 1.457712] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 1.457720] xen: --> irq=16 > [ 1.457724] Already setup the GSI :16 > [ 1.457731] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 1.457966] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 1.461571] scsi3 : ata_piix > [ 1.462268] scsi4 : ata_piix > [ 1.464011] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 > [ 1.464011] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 > [ 1.466684] ata5: port disabled. ignoring. > [ 1.467029] Fixed MDIO Bus: probed > [ 1.467683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.467784] xen: registering gsi 22 triggering 0 polarity 1 > [ 1.467816] xen: --> irq=22 > [ 1.467825] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 1.467909] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 1.467918] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 1.469012] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > [ 1.469498] ehci_hcd 0000:00:1a.7: debug port 1 > [ 1.473404] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported > [ 1.473528] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 > [ 1.483064] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 1.483383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.483391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.483399] usb usb1: Product: EHCI Host Controller > [ 1.483405] usb usb1: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd > [ 1.483414] usb usb1: SerialNumber: 0000:00:1a.7 > [ 1.484917] hub 1-0:1.0: USB hub found > [ 1.485040] hub 1-0:1.0: 4 ports detected > [ 1.486129] xen: registering gsi 20 triggering 0 polarity 1 > [ 1.486153] xen: --> irq=20 > [ 1.486159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 1.486232] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 1.486240] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 1.486697] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > [ 1.487039] ehci_hcd 0000:00:1d.7: debug port 1 > [ 1.490952] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > [ 1.491009] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 > [ 1.496054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 1.496233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.496242] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.496250] usb usb2: Product: EHCI Host Controller > [ 1.496256] usb usb2: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd > [ 1.496264] usb usb2: SerialNumber: 0000:00:1d.7 > [ 1.497266] hub 2-0:1.0: USB hub found > [ 1.497322] hub 2-0:1.0: 6 ports detected > [ 1.498293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.498446] uhci_hcd: USB Universal Host Controller Interface driver > [ 1.498758] xen: registering gsi 20 triggering 0 polarity 1 > [ 1.498763] xen_map_pirq_gsi: returning irq 20 for gsi 20 > [ 1.498770] xen: --> irq=20 > [ 1.498773] Already setup the GSI :20 > [ 1.498780] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 1.498818] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 1.498826] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 1.499273] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > [ 1.499485] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 > [ 1.499854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.499862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.499870] usb usb3: Product: UHCI Host Controller > [ 1.499876] usb usb3: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd > [ 1.499885] usb usb3: SerialNumber: 0000:00:1a.0 > [ 1.500868] hub 3-0:1.0: USB hub found > [ 1.500926] hub 3-0:1.0: 2 ports detected > [ 1.501788] xen: registering gsi 21 triggering 0 polarity 1 > [ 1.501812] xen: --> irq=21 > [ 1.501819] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 1.501857] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 1.501865] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 1.502350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > [ 1.502645] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 > [ 1.502968] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.502977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.502985] usb usb4: Product: UHCI Host Controller > [ 1.502991] usb usb4: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd > [ 1.503000] usb usb4: SerialNumber: 0000:00:1a.1 > [ 1.503918] hub 4-0:1.0: USB hub found > [ 1.503974] hub 4-0:1.0: 2 ports detected > [ 1.504830] xen: registering gsi 20 triggering 0 polarity 1 > [ 1.504835] xen_map_pirq_gsi: returning irq 20 for gsi 20 > [ 1.504842] xen: --> irq=20 > [ 1.504846] Already setup the GSI :20 > [ 1.504852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 1.504889] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 1.504898] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 1.505401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > [ 1.505641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 > [ 1.505952] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.505960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.505968] usb usb5: Product: UHCI Host Controller > [ 1.505973] usb usb5: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd > [ 1.505982] usb usb5: SerialNumber: 0000:00:1d.0 > [ 1.506979] hub 5-0:1.0: USB hub found > [ 1.507058] hub 5-0:1.0: 2 ports detected > [ 1.508013] xen: registering gsi 21 triggering 0 polarity 1 > [ 1.508017] xen_map_pirq_gsi: returning irq 21 for gsi 21 > [ 1.508024] xen: --> irq=21 > [ 1.508053] Already setup the GSI :21 > [ 1.508060] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 1.508097] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 1.508106] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 1.508526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > [ 1.508750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 > [ 1.509110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.509118] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.509126] usb usb6: Product: UHCI Host Controller > [ 1.509132] usb usb6: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd > [ 1.509140] usb usb6: SerialNumber: 0000:00:1d.1 > [ 1.510075] hub 6-0:1.0: USB hub found > [ 1.510142] hub 6-0:1.0: 2 ports detected > [ 1.510954] xen: registering gsi 22 triggering 0 polarity 1 > [ 1.510958] xen_map_pirq_gsi: returning irq 22 for gsi 22 > [ 1.510965] xen: --> irq=22 > [ 1.510969] Already setup the GSI :22 > [ 1.510975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 1.511037] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 1.511045] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 1.511472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > [ 1.511709] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 > [ 1.512054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.512062] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 1.512070] usb usb7: Product: UHCI Host Controller > [ 1.512076] usb usb7: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd > [ 1.512084] usb usb7: SerialNumber: 0000:00:1d.2 > [ 1.512968] hub 7-0:1.0: USB hub found > [ 1.513082] hub 7-0:1.0: 2 ports detected > [ 1.514306] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > [ 1.515012] i8042.c: Detected active multiplexing controller, rev 1.1. > [ 1.541669] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.541669] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 1.542434] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 1.542708] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 1.542998] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 1.543959] mice: PS/2 mouse device common for all mice > [ 1.545789] rtc_cmos 00:04: RTC can wake from S4 > [ 1.546497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 1.546589] rtc0: alarms up to one month, y3k, 114 bytes nvram > [ 1.547751] device-mapper: uevent: version 1.0.3 > [ 1.548982] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com > [ 1.550808] cpuidle: using governor ladder > [ 1.552464] cpuidle: using governor menu > [ 1.554429] usbcore: registered new interface driver usbhid > [ 1.554436] usbhid: USB HID core driver > [ 1.554755] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 1.559346] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 1.559463] TCP cubic registered > [ 1.559469] Initializing XFRM netlink socket > [ 1.559535] NET: Registered protocol family 17 > [ 1.559680] Registering the dns_resolver key type > [ 1.560789] PM: Hibernation image not present or could not be loaded. > [ 1.560912] registered taskstats version 1 > [ 1.561465] IMA: No TPM chip found, activating TPM-bypass! > [ 1.563842] Magic number: 6:963:648 > [ 1.563871] scsi_host host2: hash matches > [ 1.563877] scsi host2: hash matches > [ 1.563983] processor LNXCPU:01: hash matches > [ 1.564101] rtc_cmos 00:04: setting system clock to 2010-12-03 20:38:46 UTC (1291408726) > [ 1.564389] Initalizing network drop monitor service > [ 1.572051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 > [ 1.636611] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 > [ 1.658414] ata4.00: configured for UDMA/33 > [ 1.753698] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4 > [ 1.761447] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5 > [ 1.763120] ata3: SATA link down (SStatus 0 SControl 300) > [ 1.787219] usb 1-1: new high speed USB device using ehci_hcd and address 2 > [ 1.907020] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 > [ 1.907029] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 1.907037] usb 1-1: Product: Laptop Integrated Webcam > [ 1.907043] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 > [ 2.181227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.319160] usb 6-2: new low speed USB device using uhci_hcd and address 2 > [ 2.486280] usb 6-2: New USB device found, idVendor=046d, idProduct=c517 > [ 2.486289] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 2.486296] usb 6-2: Product: USB Receiver > [ 2.486302] usb 6-2: Manufacturer: Logitech > [ 2.505613] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 > [ 2.506889] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 > [ 36.001170] ata1.00: qc timeout (cmd 0x27) > [ 36.001187] ata1.00: failed to read native max address (err_mask=0x4) > [ 36.001194] ata1.00: HPA support seems broken, skipping HPA handling > [ 36.001509] uhci_hcd 0000:00:1a.0: PCI INT A disabled > [ 36.001858] uhci_hcd 0000:00:1a.1: PCI INT B disabled > [ 36.002246] uhci_hcd 0000:00:1d.0: PCI INT A disabled > [ 36.029123] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor > [ 36.030289] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7 > [ 36.031983] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 > [ 36.238211] usb 7-2: new full speed USB device using uhci_hcd and address 2 > [ 36.307575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 36.308293] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 > [ 36.308310] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA > [ 36.309278] ata1.00: configured for UDMA/100 > [ 36.310595] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 > [ 36.312478] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) > [ 36.312938] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 36.313039] sd 0:0:0:0: [sda] Write Protect is off > [ 36.313047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 36.313264] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 36.318433] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 > [ 36.335230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > [ 36.335244] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 36.336431] sr 3:0:0:0: Attached scsi CD-ROM sr0 > [ 36.337045] sr 3:0:0:0: Attached scsi generic sg1 type 5 > [ 36.398715] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 > [ 36.398724] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 36.398732] usb 7-2: Product: BCM2045B2 > [ 36.398737] usb 7-2: Manufacturer: Broadcom > [ 36.400929] hub 7-2:1.0: USB hub found > [ 36.402733] hub 7-2:1.0: 3 ports detected > [ 36.679703] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 > [ 36.768221] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > > [ 36.772364] sd 0:0:0:0: [sda] Attached SCSI disk > [ 36.773011] Freeing unused kernel memory: 2744k freed > [ 36.773011] Write protecting the kernel read-only data: 10240k > [ 36.789969] Freeing unused kernel memory: 1276k freed > [ 36.792956] Freeing unused kernel memory: 1616k freed > [ 36.800534] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 > [ 36.800548] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 36.800557] usb 7-2.1: Product: BCM2045 > [ 36.800562] usb 7-2.1: Manufacturer: Broadcom Corp > [ 36.823979] mount used greatest stack depth: 5248 bytes left > [ 36.874647] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 > [ 36.878951] dracut: dracut-006-5.fc14 > [ 36.943518] udev[84]: starting version 161 > [ 36.996694] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 > [ 36.996706] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 > [ 36.996715] usb 7-2.2: Manufacturer: Broadcom Corp > [ 105.689486] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 > [ 105.690223] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 > [ 105.693130] ehci_hcd 0000:00:1d.7: PCI INT A disabled > [ 105.693268] ehci_hcd 0000:00:1d.7: PME# enabled > [ 105.755988] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 > [ 105.805477] udevadm used greatest stack depth: 5200 bytes left > [ 105.875286] [drm] Initialized drm 1.1.0 20060810 > [ 105.915996] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 > [ 105.916011] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 > [ 105.916011] usb 7-2.3: Manufacturer: Broadcom Corp > [ 105.932670] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 > [ 105.937353] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 > [ 105.948127] xen: registering gsi 16 triggering 0 polarity 1 > [ 105.948133] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 105.948142] xen: --> irq=16 > [ 105.948147] Already setup the GSI :16 > [ 105.948155] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 105.948173] i915 0000:00:02.0: setting latency timer to 64 > [ 106.257101] [drm] MTRR allocation failed. Graphics performance may suffer. > [ 106.318984] composite sync not supported > [ 106.488426] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 106.488878] [drm] initialized overlay support > [ 106.489013] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. > [ 106.501316] composite sync not supported > [ 106.511230] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. > [ 106.585871] fbcon: inteldrmfb (fb0) is primary device > [ 106.587198] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. > [ 106.617125] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. > [ 106.617129] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. > [ 106.622541] Console: switching to colour frame buffer device 160x50 > [ 106.625011] fb0: inteldrmfb frame buffer device > [ 106.625011] drm: registered panic notifier > [ 106.674422] acpi device:30: registered as cooling_device2 > [ 106.677398] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10 > [ 106.678382] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > [ 106.678663] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > [ 106.678943] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 106.681091] modprobe used greatest stack depth: 3632 bytes left > [ 115.383580] dracut: Starting plymouth daemon > [ 115.429847] composite sync not supported > [ 116.062508] xen: registering gsi 16 triggering 0 polarity 1 > [ 116.062514] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 116.062551] xen: --> irq=16 > [ 116.062557] Already setup the GSI :16 > [ 116.062579] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 116.084452] sdhci: Secure Digital Host Controller Interface driver > [ 116.084498] sdhci: Copyright(c) Pierre Ossman > [ 116.126456] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 > [ 116.128758] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) > [ 116.128837] xen: registering gsi 18 triggering 0 polarity 1 > [ 116.128867] xen: --> irq=18 > [ 116.128877] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 > [ 116.132819] Registered led device: mmc0:: > [ 116.134397] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA > [ 131.799412] firewire_core: created device fw0: GUID 444fc00012d94c70, S400 > [ 133.104764] dracut: Scanning devices sda7 for LVM volume groups > [ 133.380718] dracut: Reading all physical volumes. This may take a while... > [ 133.382792] dracut: Found volume group "vg0" using metadata type lvm2 > [ 143.325625] dracut: 7 logical volume(s) in volume group "vg0" now active > [ 143.417889] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) > [ 143.510994] dracut: Remounting /dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro > [ 143.544636] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) > [ 143.585225] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b > [ 143.801926] dracut: Loading SELinux policy > [ 144.342736] SELinux: 2048 avtab hash slots, 210512 rules. > [ 144.664886] SELinux: 2048 avtab hash slots, 210512 rules. > [ 145.997495] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats > [ 145.997502] SELinux: 77 classes, 210512 rules > [ 146.025709] SELinux: Permission read_policy in class security not defined in policy. > [ 146.026023] SELinux: the above unknown classes and permissions will be allowed > [ 146.026023] SELinux: Completing initialization. > [ 146.026023] SELinux: Setting up existing superblocks. > [ 146.026023] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > [ 146.026023] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > [ 146.026023] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > [ 146.026023] SELinux: initialized (dev proc, type proc), uses genfs_contexts > [ 146.026023] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > [ 146.026023] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs > [ 146.026023] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > [ 146.026023] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > [ 146.045012] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev devpts, type devpts), uses transition SIDs > [ 146.045012] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > [ 146.045012] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > [ 146.045012] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > [ 146.045012] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > [ 146.068415] SELinux: initialized (dev dm-8, type ext4), uses xattr > [ 146.105894] type=1403 audit(1291408871.041:2): policy loaded auid=4294967295 ses=4294967295 > [ 146.687015] restorecon used greatest stack depth: 3600 bytes left > [ 146.972245] dracut: Switching root > [ 148.433078] readahead-collector: starting > [ 150.747204] udev[408]: starting version 161 > [ 151.763232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 152.332329] Linux video capture interface: v2.00 > [ 152.427894] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) > [ 152.430482] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. > [ 152.432985] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). > [ 152.433625] uvcvideo: Failed to initialize the device (-5). > [ 152.440323] usbcore: registered new interface driver uvcvideo > [ 152.441019] USB Video Class driver (v1.0.0) > [ 153.831044] wmi: Mapper loaded > [ 154.014580] cfg80211: Calling CRDA to update world regulatory domain > [ 154.345261] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 > [ 154.345329] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 > [ 154.345363] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 > [ 154.345418] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 > [ 154.345445] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 > [ 154.345471] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 > [ 154.345515] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 > [ 154.345543] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 > [ 154.345571] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 > [ 154.346002] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 > [ 154.346024] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 > [ 154.346090] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 > [ 154.346117] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 > [ 154.346146] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 > [ 154.346180] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 > [ 154.346206] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 > [ 154.346242] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 > [ 154.346544] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 > [ 154.346575] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 > [ 154.346604] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 > [ 154.346631] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 > [ 154.346657] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 > [ 154.346683] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 > [ 154.346718] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 > [ 154.346766] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 > [ 154.346793] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 > [ 154.346828] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 > [ 154.346854] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 > [ 154.346880] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 > [ 154.346919] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 > [ 154.347220] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 > [ 154.347276] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 > [ 154.347305] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 > [ 154.347331] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 > [ 154.347358] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 > [ 154.347384] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 > [ 154.347411] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 > [ 154.347454] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 > [ 154.347487] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 > [ 154.347517] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 > [ 154.347543] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 > [ 154.347569] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 > [ 154.347605] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 > [ 154.347632] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 > [ 154.347660] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 > [ 154.347713] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 > [ 154.347740] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 > [ 154.348207] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 > [ 154.348236] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 > [ 154.506418] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > [ 154.507037] iwlagn: Copyright(c) 2003-2010 Intel Corporation > [ 154.513352] xen: registering gsi 17 triggering 0 polarity 1 > [ 154.513358] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 154.514010] xen: --> irq=17 > [ 154.515084] Already setup the GSI :17 > [ 154.516062] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 154.516062] iwlagn 0000:0b:00.0: setting latency timer to 64 > [ 154.521583] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 > [ 154.567366] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5 > [ 154.569748] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels > [ 154.756009] sky2: driver version 1.28 > [ 154.762160] xen: registering gsi 16 triggering 0 polarity 1 > [ 154.762166] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 154.763010] xen: --> irq=16 > [ 154.763822] Already setup the GSI :16 > [ 154.764770] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 154.767238] sky2 0000:09:00.0: setting latency timer to 64 > [ 154.767416] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 > [ 154.776659] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6 > [ 156.353946] Bluetooth: Core ver 2.15 > [ 156.359231] NET: Registered protocol family 31 > [ 156.360024] Bluetooth: HCI device and connection manager initialized > [ 156.360024] Bluetooth: HCI socket layer initialized > [ 156.569033] Bluetooth: Generic Bluetooth USB driver ver 0.6 > [ 156.578429] usbcore: registered new interface driver btusb > [ 156.793307] iTCO_vendor_support: vendor-support=0 > [ 156.874972] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 > [ 156.877518] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) > [ 156.880377] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 157.059584] input: Dell WMI hotkeys as /devices/virtual/input/input11 > [ 157.180515] xen: registering gsi 18 triggering 0 polarity 1 > [ 157.180521] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 157.181010] xen: --> irq=18 > [ 157.182037] Already setup the GSI :18 > [ 157.183021] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 > [ 157.185724] r852: driver loaded succesfully > [ 157.387499] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 > [ 157.894405] xen: registering gsi 21 triggering 0 polarity 1 > [ 157.894411] xen_map_pirq_gsi: returning irq 21 for gsi 21 > [ 157.895075] xen: --> irq=21 > [ 157.895936] Already setup the GSI :21 > [ 157.896888] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > [ 157.899643] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 158.988157] cfg80211: World regulatory domain updated: > [ 158.989015] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 158.989015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 158.989015] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 158.989015] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 158.989015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 158.989015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 159.847134] cfg80211: Calling CRDA for country: GB > [ 160.074022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' > [ 161.611185] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) > [ 161.611191] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 161.611196] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) > [ 161.611201] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 > [ 161.611205] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0 > [ 161.611210] ALSA sound/pci/hda/hda_codec.c:4632: inputs: > [ 161.611214] ALSA sound/pci/hda/hda_codec.c:4638: > [ 161.611785] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) > [ 162.492213] cfg80211: Regulatory domain changed to country: GB > [ 162.493013] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 162.493013] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) > [ 162.493013] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) > [ 162.493013] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) > [ 162.493013] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) > [ 163.788950] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 > [ 163.792143] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 > [ 163.794706] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 > [ 163.798976] audit: name_count maxed, losing inode data: dev=00:05, inode=11782 > [ 163.799690] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.799816] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.803318] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.803369] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.805691] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.805753] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.808665] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.808921] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 > [ 163.811368] xen: registering gsi 17 triggering 0 polarity 1 > [ 163.811373] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 163.812025] xen: --> irq=17 > [ 163.812691] Already setup the GSI :17 > [ 163.813676] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 163.915216] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > [ 165.686148] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba > [ 169.198131] ip used greatest stack depth: 3488 bytes left > [ 169.912335] SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts > [ 169.960778] Event-channel device installed. > [ 172.164745] EXT4-fs (dm-8): re-mounted. Opts: (null) > [ 174.063444] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > [ 176.849172] dmeventd (1025): /proc/1025/oom_adj is deprecated, please use /proc/1025/oom_score_adj instead. > [ 178.278183] NET: Registered protocol family 10 > [ 178.292650] lo: Disabled Privacy Extensions > [ 178.335359] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 188.895215] Bluetooth: L2CAP ver 2.15 > [ 188.896016] Bluetooth: L2CAP socket layer initialized > [ 189.036115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 189.037059] Bluetooth: BNEP filters: protocol multicast > [ 189.070325] Bluetooth: SCO (Voice Link) ver 0.6 > [ 189.071010] Bluetooth: SCO socket layer initialized > [ 189.287778] Bluetooth: RFCOMM TTY layer initialized > [ 189.288014] Bluetooth: RFCOMM socket layer initialized > [ 189.288014] Bluetooth: RFCOMM ver 1.11 > [ 190.275241] sky2 0000:09:00.0: eth0: enabling interface > [ 190.306010] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 190.671870] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 191.713023] btusb_intr_complete: hci0 urb ffff8800cf6fc630 failed to resubmit (1) > [ 191.716094] btusb_bulk_complete: hci0 urb ffff8800cf6fc948 failed to resubmit (1) > [ 191.718974] btusb_bulk_complete: hci0 urb ffff8800cf6fca50 failed to resubmit (1) > [ 194.208998] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > [ 194.601189] XENBUS: Unable to read cpu state > [ 194.606842] XENBUS: Unable to read cpu state > [ 195.605014] Bridge firewalling registered > [ 199.162255] Ebtables v2.0 registered > [ 200.146258] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > [ 200.147480] SELinux: initialized (dev proc, type proc), uses genfs_contexts > [ 200.200013] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > [ 200.215545] lo: Disabled Privacy Extensions > [ 200.226307] SELinux: initialized (dev proc, type proc), uses genfs_contexts > [ 228.501223] readahead-collector: sorting > [ 228.815859] readahead-collector: finished > > (XEN) Xen version 4.0.1 (mockbuild@(none)) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) Tue Oct 12 22:05:04 UTC 2010 > (XEN) Latest ChangeSet: unavailable > (XEN) Bootloader: GNU GRUB 0.97 > (XEN) Command line: > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009f000 (usable) > (XEN) 000000000009f000 - 00000000000a0000 (reserved) > (XEN) 0000000000100000 - 00000000df66d800 (usable) > (XEN) 00000000df66d800 - 00000000e0000000 (reserved) > (XEN) 00000000f8000000 - 00000000fc000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec10000 (reserved) > (XEN) 00000000fed18000 - 00000000fed1c000 (reserved) > (XEN) 00000000fed20000 - 00000000fed90000 (reserved) > (XEN) 00000000feda0000 - 00000000feda6000 (reserved) > (XEN) 00000000fee00000 - 00000000fee10000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000120000000 (usable) > (XEN) ACPI: RSDP 000FBC60, 0024 (r2 DELL ) > (XEN) ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624) > (XEN) ACPI: FACS DF67E000, 0040 > (XEN) ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) > (XEN) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D90A1B ASL 47) > (XEN) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: SLIC DF66F49C, 0176 (r1 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D90A1B ASL 61) > (XEN) ACPI: SSDT DF66D97E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) > (XEN) System RAM: 4086MB (4184112kB) > (XEN) Domain heap initialised > (XEN) Processor #0 7:7 APIC version 20 > (XEN) Processor #1 7:7 APIC version 20 > (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2394.062 MHz processor. > (XEN) Initing memory sharing. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs disabled. > (XEN) HVM: VMX enabled > (XEN) I/O virtualisation disabled > (XEN) Total of 2 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) checking TSC synchronization across 2 CPUs: passed. > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 16 KiB. > (XEN) Brought up 2 CPUs > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2ac8000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (967228 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff82ac8000 > (XEN) Init. ramdisk: ffffffff82ac8000->ffffffff84ea1a00 > (XEN) Phys-Mach map: ffffffff84ea2000->ffffffff856431e0 > (XEN) Start info: ffffffff85644000->ffffffff856444b4 > (XEN) Page tables: ffffffff85645000->ffffffff85674000 > (XEN) Boot stack: ffffffff85674000->ffffffff85675000 > (XEN) TOTAL: ffffffff80000000->ffffffff85800000 > (XEN) ENTRY ADDRESS: ffffffff81d36200 > (XEN) Dom0 has maximum 2 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 172kB init memory. > (XEN) 'h' pressed -> showing installed handlers > (XEN) key '%' (ascii '25') => trap to xendbg > (XEN) key '*' (ascii '2a') => print all diagnostics > (XEN) key '0' (ascii '30') => dump Dom0 registers > (XEN) key 'C' (ascii '43') => trigger a crashdump > (XEN) key 'H' (ascii '48') => dump heap info > (XEN) key 'M' (ascii '4d') => dump MSI state > (XEN) key 'N' (ascii '4e') => trigger an NMI > (XEN) key 'Q' (ascii '51') => dump PCI devices > (XEN) key 'R' (ascii '52') => reboot machine > (XEN) key 'a' (ascii '61') => dump timer queues > (XEN) key 'c' (ascii '63') => dump ACPI Cx structures > (XEN) key 'd' (ascii '64') => dump registers > (XEN) key 'e' (ascii '65') => dump evtchn info > (XEN) key 'g' (ascii '67') => print grant table usage > (XEN) key 'h' (ascii '68') => show this message > (XEN) key 'i' (ascii '69') => dump interrupt bindings > (XEN) key 'm' (ascii '6d') => memory info > (XEN) key 'n' (ascii '6e') => NMI statistics > (XEN) key 'q' (ascii '71') => dump domain (and guest debug) info > (XEN) key 'r' (ascii '72') => dump run queues > (XEN) key 's' (ascii '73') => dump softtsc stats > (XEN) key 't' (ascii '74') => display multi-cpu clock info > (XEN) key 'u' (ascii '75') => dump numa info > (XEN) key 'v' (ascii '76') => dump Intel's VMCS > (XEN) key 'z' (ascii '7a') => print ioapic info > (XEN) 'e' pressed -> dumping event-channel info > (XEN) Event channel information for domain 0: > (XEN) Polling vCPUs: {} > (XEN) port [p/m] > (XEN) 1 [0/0]: s=5 n=0 v=0 x=0 > (XEN) 2 [0/0]: s=6 n=0 x=0 > (XEN) 3 [0/0]: s=6 n=0 x=0 > (XEN) 4 [0/0]: s=5 n=0 v=1 x=0 > (XEN) 5 [0/0]: s=6 n=0 x=0 > (XEN) 6 [0/0]: s=5 n=1 v=0 x=0 > (XEN) 7 [0/0]: s=6 n=1 x=0 > (XEN) 8 [0/0]: s=6 n=1 x=0 > (XEN) 9 [0/0]: s=5 n=1 v=1 x=0 > (XEN) 10 [0/0]: s=6 n=1 x=0 > (XEN) 11 [0/0]: s=3 n=1 d=0 p=25 x=0 > (XEN) 12 [0/0]: s=4 n=0 p=9 x=0 > (XEN) 13 [0/1]: s=5 n=0 v=2 x=0 > (XEN) 14 [0/0]: s=4 n=0 p=17 x=0 > (XEN) 15 [0/0]: s=4 n=0 p=14 x=0 > (XEN) 16 [0/0]: s=4 n=0 p=15 x=0 > (XEN) 17 [0/0]: s=4 n=0 p=22 x=0 > (XEN) 18 [0/0]: s=4 n=0 p=20 x=0 > (XEN) 19 [0/0]: s=4 n=0 p=21 x=0 > (XEN) 20 [0/0]: s=4 n=0 p=12 x=0 > (XEN) 21 [0/0]: s=4 n=0 p=1 x=0 > (XEN) 22 [0/0]: s=4 n=0 p=8 x=0 > (XEN) 23 [0/0]: s=4 n=0 p=16 x=0 > (XEN) 24 [0/0]: s=4 n=0 p=18 x=0 > (XEN) 25 [0/0]: s=3 n=0 d=0 p=11 x=0 > (XEN) 26 [0/0]: s=5 n=0 v=3 x=0 > (XEN) PCI-MSI interrupt information: > (XEN) ==== PCI devices ==== > (XEN) 02:09.3 - dom 0 - MSIs < > > (XEN) 02:09.2 - dom 0 - MSIs < > > (XEN) 02:09.1 - dom 0 - MSIs < > > (XEN) 02:09.0 - dom 0 - MSIs < > > (XEN) 0b:00.0 - dom 0 - MSIs < > > (XEN) 09:00.0 - dom 0 - MSIs < > > (XEN) 00:1f.3 - dom 0 - MSIs < > > (XEN) 00:1f.2 - dom 0 - MSIs < > > (XEN) 00:1f.1 - dom 0 - MSIs < > > (XEN) 00:1f.0 - dom 0 - MSIs < > > (XEN) 00:1e.0 - dom 0 - MSIs < > > (XEN) 00:1d.7 - dom 0 - MSIs < > > (XEN) 00:1d.2 - dom 0 - MSIs < > > (XEN) 00:1d.1 - dom 0 - MSIs < > > (XEN) 00:1d.0 - dom 0 - MSIs < > > (XEN) 00:1c.4 - dom 0 - MSIs < > > (XEN) 00:1c.1 - dom 0 - MSIs < > > (XEN) 00:1c.0 - dom 0 - MSIs < > > (XEN) 00:1b.0 - dom 0 - MSIs < > > (XEN) 00:1a.7 - dom 0 - MSIs < > > (XEN) 00:1a.1 - dom 0 - MSIs < > > (XEN) 00:1a.0 - dom 0 - MSIs < > > (XEN) 00:02.1 - dom 0 - MSIs < > > (XEN) 00:02.0 - dom 0 - MSIs < > > (XEN) 00:00.0 - dom 0 - MSIs < > > (XEN) Guest interrupt information: > (XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0 type=IO-APIC-edge status=00000000 mapped, unbound > (XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(----), > (XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2 type=XT-PIC status=00000000 mapped, unbound > (XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:30 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:38 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:40 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:48 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:50 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:58 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(----), > (XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:60 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(----), > (XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:68 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:70 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:78 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 12(----), > (XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000003 vec:88 type=IO-APIC-edge status=00000002 mapped, unbound > (XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:90 type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 14(----), > (XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:98 type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 15(----), > (XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(----), > (XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000001 vec:a8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 17(----), > (XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:c8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(----), > (XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000001 vec:b8 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 20(----), > (XEN) IRQ: 21 affinity:00000000,00000000,00000000,00000001 vec:c0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 21(----), > (XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:b0 type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 22(----), > (XEN) IO-APIC interrupt information: > (XEN) IRQ 0 Vec240: > (XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 1 Vec 40: > (XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 3 Vec 48: > (XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 4 Vec 56: > (XEN) Apic 0x00, Pin 4: vector=56, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 5 Vec 64: > (XEN) Apic 0x00, Pin 5: vector=64, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 6 Vec 72: > (XEN) Apic 0x00, Pin 6: vector=72, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 7 Vec 80: > (XEN) Apic 0x00, Pin 7: vector=80, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 8 Vec 88: > (XEN) Apic 0x00, Pin 8: vector=88, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 9 Vec 96: > (XEN) Apic 0x00, Pin 9: vector=96, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 10 Vec104: > (XEN) Apic 0x00, Pin 10: vector=104, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 11 Vec112: > (XEN) Apic 0x00, Pin 11: vector=112, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 12 Vec120: > (XEN) Apic 0x00, Pin 12: vector=120, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 13 Vec136: > (XEN) Apic 0x00, Pin 13: vector=136, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:3 > (XEN) IRQ 14 Vec144: > (XEN) Apic 0x00, Pin 14: vector=144, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 15 Vec152: > (XEN) Apic 0x00, Pin 15: vector=152, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 > (XEN) IRQ 16 Vec160: > (XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 17 Vec168: > (XEN) Apic 0x00, Pin 17: vector=168, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 18 Vec200: > (XEN) Apic 0x00, Pin 18: vector=200, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 20 Vec184: > (XEN) Apic 0x00, Pin 20: vector=184, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 21 Vec192: > (XEN) Apic 0x00, Pin 21: vector=192, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) IRQ 22 Vec176: > (XEN) Apic 0x00, Pin 22: vector=176, delivery_mode=1, dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1 > (XEN) number of MP IRQ sources: 15. > (XEN) number of IO-APIC #2 registers: 24. > (XEN) testing the IO APIC....................... > (XEN) IO APIC #2...... > (XEN) .... register #00: 00000000 > (XEN) ....... : physical APIC id: 00 > (XEN) ....... : Delivery Type: 0 > (XEN) ....... : LTS : 0 > (XEN) .... register #01: 00170020 > (XEN) ....... : max redirection entries: 0017 > (XEN) ....... : PRQ implemented: 0 > (XEN) ....... : IO APIC version: 0020 > (XEN) .... IRQ redirection table: > (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > (XEN) 00 000 00 1 0 0 0 0 0 0 00 > (XEN) 01 001 01 0 0 0 0 0 1 1 28 > (XEN) 02 001 01 0 0 0 0 0 1 1 F0 > (XEN) 03 001 01 0 0 0 0 0 1 1 30 > (XEN) 04 001 01 0 0 0 0 0 1 1 38 > (XEN) 05 001 01 0 0 0 0 0 1 1 40 > (XEN) 06 001 01 0 0 0 0 0 1 1 48 > (XEN) 07 001 01 0 0 0 0 0 1 1 50 > (XEN) 08 001 01 0 0 0 0 0 1 1 58 > (XEN) 09 001 01 0 1 0 0 0 1 1 60 > (XEN) 0a 001 01 0 0 0 0 0 1 1 68 > (XEN) 0b 001 01 0 0 0 0 0 1 1 70 > (XEN) 0c 001 01 0 0 0 0 0 1 1 78 > (XEN) 0d 003 03 1 0 0 0 0 1 1 88 > (XEN) 0e 001 01 0 0 0 0 0 1 1 90 > (XEN) 0f 001 01 0 0 0 0 0 1 1 98 > (XEN) 10 001 01 0 1 0 1 0 1 1 A0 > (XEN) 11 001 01 0 1 0 1 0 1 1 A8 > (XEN) 12 001 01 0 1 0 1 0 1 1 C8 > (XEN) 13 000 00 1 0 0 0 0 0 0 00 > (XEN) 14 001 01 0 1 0 1 0 1 1 B8 > (XEN) 15 001 01 0 1 0 1 0 1 1 C0 > (XEN) 16 001 01 0 1 0 1 0 1 1 B0 > (XEN) 17 000 00 1 0 0 0 0 0 0 00 > (XEN) Using vector-based indexing > (XEN) IRQ to pin mappings: > (XEN) IRQ240 -> 0:2 > (XEN) IRQ40 -> 0:1 > (XEN) IRQ48 -> 0:3 > (XEN) IRQ56 -> 0:4 > (XEN) IRQ64 -> 0:5 > (XEN) IRQ72 -> 0:6 > (XEN) IRQ80 -> 0:7 > (XEN) IRQ88 -> 0:8 > (XEN) IRQ96 -> 0:9 > (XEN) IRQ104 -> 0:10 > (XEN) IRQ112 -> 0:11 > (XEN) IRQ120 -> 0:12 > (XEN) IRQ136 -> 0:13 > (XEN) IRQ144 -> 0:14 > (XEN) IRQ152 -> 0:15 > (XEN) IRQ160 -> 0:16 > (XEN) IRQ168 -> 0:17 > (XEN) IRQ200 -> 0:18 > (XEN) IRQ184 -> 0:20 > (XEN) IRQ192 -> 0:21 > (XEN) IRQ176 -> 0:22 > (XEN) .................................... done. > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: Slow boot with 2.6.37-rc4 2010-12-14 17:02 ` Konrad Rzeszutek Wilk @ 2010-12-15 0:47 ` M A Young 0 siblings, 0 replies; 13+ messages in thread From: M A Young @ 2010-12-15 0:47 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 448 bytes --] On Tue, 14 Dec 2010, Konrad Rzeszutek Wilk wrote: > On Wed, Dec 08, 2010 at 10:50:52PM +0000, M A Young wrote: >> Actually, I might have sent the wrong log files in my earlier post. >> >> Here are the kernel dmesg output and debugkeys output from a nomsi boot. > > Can you send me the lspci -vvv and lspci - n try this patch below with MSI enabled. The patch doesn't seem to make much difference. The lspci outputs are attached. Michael Young [-- Attachment #2: Type: TEXT/PLAIN, Size: 28429 bytes --] 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0a <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 285 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at eff8 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 41d0 Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f20 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f00 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 288 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4131 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed18000 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000ff600000-00000000ff7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Dell Device 022f Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed18001 Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000ff400000-00000000ff5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #3, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Dell Device 022f Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=02 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed18001 Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe400000-fe6fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Dell Device 022f Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=05 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed18001 Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe300000-fe3fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device 022f 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 022f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 6fa0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 284 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=32] Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/4 Maskable- 64bit- Address: fee0100c Data: 41b0 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI]) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe3ff800 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fe3ff500 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at fe3ff600 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- 02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) Subsystem: Dell Device 022f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fe3ff700 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: r852 Kernel modules: r852 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) Subsystem: Dell Device 022f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 286 Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at de00 [size=256] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4121 Capabilities: [c0] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [130 v1] Device Serial Number a6-96-4a-ff-ff-09-1d-00 Kernel driver in use: sky2 Kernel modules: sky2 0b:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) Subsystem: Intel Corporation Device 1121 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 287 Region 0: Memory at fe7fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4129 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-1f-3b-ff-ff-6a-75-89 Kernel driver in use: iwlagn Kernel modules: iwlagn [-- Attachment #3: Type: TEXT/PLAIN, Size: 850 bytes --] 00:00.0 0600: 8086:2a00 (rev 0c) 00:02.0 0300: 8086:2a02 (rev 0c) 00:02.1 0380: 8086:2a03 (rev 0c) 00:1a.0 0c03: 8086:2834 (rev 02) 00:1a.1 0c03: 8086:2835 (rev 02) 00:1a.7 0c03: 8086:283a (rev 02) 00:1b.0 0403: 8086:284b (rev 02) 00:1c.0 0604: 8086:283f (rev 02) 00:1c.1 0604: 8086:2841 (rev 02) 00:1c.4 0604: 8086:2847 (rev 02) 00:1d.0 0c03: 8086:2830 (rev 02) 00:1d.1 0c03: 8086:2831 (rev 02) 00:1d.2 0c03: 8086:2832 (rev 02) 00:1d.7 0c03: 8086:2836 (rev 02) 00:1e.0 0604: 8086:2448 (rev f2) 00:1f.0 0601: 8086:2815 (rev 02) 00:1f.1 0101: 8086:2850 (rev 02) 00:1f.2 0106: 8086:2829 (rev 02) 00:1f.3 0c05: 8086:283e (rev 02) 02:09.0 0c00: 1180:0832 (rev 05) 02:09.1 0805: 1180:0822 (rev 22) 02:09.2 0880: 1180:0592 (rev 12) 02:09.3 0880: 1180:0852 (rev 12) 09:00.0 0200: 11ab:4354 (rev 12) 0b:00.0 0280: 8086:4229 (rev 61) [-- Attachment #4: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-12-15 0:47 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-11-30 23:59 Slow boot with 2.6.37-rc4 M A Young 2010-12-01 8:31 ` Jeremy Fitzhardinge 2010-12-01 20:15 ` M A Young 2010-12-01 15:17 ` Konrad Rzeszutek Wilk 2010-12-01 19:15 ` M A Young 2010-12-03 20:06 ` Konrad Rzeszutek Wilk 2010-12-03 22:20 ` M A Young 2010-12-03 23:11 ` Konrad Rzeszutek Wilk 2010-12-08 22:12 ` M A Young 2010-12-08 22:50 ` M A Young 2010-12-09 1:22 ` Konrad Rzeszutek Wilk 2010-12-14 17:02 ` Konrad Rzeszutek Wilk 2010-12-15 0:47 ` M A Young
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).