xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
* Xen 4.2 unstable + Jeremy's stable/2.6.32.x
@ 2011-03-24 17:39 Goncalo Gomes
  2011-03-25 14:49 ` Konrad Rzeszutek Wilk
  0 siblings, 1 reply; 5+ messages in thread
From: Goncalo Gomes @ 2011-03-24 17:39 UTC (permalink / raw)
  To: xen-devel

[-- Attachment #1: Type: text/plain, Size: 978 bytes --]

I'm trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy's
stable 2.6.32.x tree. I can see Xen booting up from the serial console
(logged and attached as dt29boot.log), however, it stops right after a
number of "PCI add device (...)" lines.

Not sure if relevant but as a part of my attempt at troubleshooting I
switched into Xen's serial input by pressing ctrl+a three times and
subsequently pressing 'Q'. Strangely, this seems to result in a list of
PCI devices that is larger than the number of reportedly added PCI
devices by Xen. Is this expected?

Any alternate hints and/or suggestions would be fairly welcome. I'm
attaching some relevant information about the HW in question.

Goncalo


grub entry 

title		Xen 4.2 unstable / 2.6.32.33
root            (hd0,0)
kernel		/boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring
module		/boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc
console=hvc0 earlyprintk=xen
module		/boot/initrd-xen




[-- Attachment #2: dt29boot.log --]
[-- Type: text/x-log, Size: 13358 bytes --]

Script started on Thu 24 Mar 2011 16:29:06 GMT
goncalog@eire:~$ xenuse -t dt29
[Enter `^Ec?' for help]
^[[m^[[7;3H Xen 4.2 unstable / 2.6.32.33                                            ^[[7;75H^[[m^[[m^[[7m^[[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode)              ^[[6;75H^[[m^[[m^[[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode)              ^[[6;75H^[[m^[[m^[[7m^[[7;3H Xen 4.2 unstable / 2.6.32.33                                            ^[[7;75H^[[m^[[H^[[J  Booting 'Xen 4.2 unstable / 2.6.32.33'

root            (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel  /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring
   [Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078, entry=0x100000]
module  /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hv
c0 earlyprintk=xen
   [Multiboot-module @ 0x2d6000, 0x23de30 bytes]
module  /boot/initrd-xen
   [Multiboot-module @ 0x514000, 0x12d7a00 bytes]

 __  __            _  _    _   ___               __                     
 \ \/ /___ _ __   | || |  / | / _ \    _ __ ___ / /_     _ __  _ __ ___ 
  \  // _ \ '_ \  | || |_ | || | | |__| '__/ __| '_ \ __| '_ \| '__/ _ \
  /  \  __/ | | | |__   _|| || |_| |__| | | (__| (_) |__| |_) | | |  __/
 /_/\_\___|_| |_|    |_|(_)_(_)___/   |_|  \___|\___/   | .__/|_|  \___|
                                                        |_|             
(XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011
(XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009e000 (usable)
(XEN)  0000000000100000 - 00000000bf699000 (usable)
(XEN)  00000000bf699000 - 00000000bf6af000 (reserved)
(XEN)  00000000bf6af000 - 00000000bf6ce000 (ACPI data)
(XEN)  00000000bf6ce000 - 00000000c0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fe000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000240000000 (usable)
(XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL  )
(XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL   PE_SC3          1 INTL 20050624)
(XEN) ACPI: FACS BF6C6000, 0040
(XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL   PE_SC3          1 DELL        1)
(XEN) System RAM: 8182MB (8378588kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000240000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:                  wakeup_vec[bf6c600c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2660.049 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
XEN) Allocated console ring of 64 KiB.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000
(XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0
(XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98
(XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0x0
(XEN)     virt_offset      = 0xffffffff80000000
(XEN)     virt_kstart      = 0xffffffff81000000
(XEN)     virt_kend        = 0xffffffff81708000
(XEN)     virt_entry       = 0xffffffff814a0200
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000234000000->0000000238000000 (2012036 pages to be allocated)
(XEN)  Init. ramdisk: 000000023ed28000->000000023ffffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81708000
(XEN)  Init. ramdisk: ffffffff81708000->ffffffff829dfa00
(XEN)  Phys-Mach map: ffffffff829e0000->ffffffff839632e0
(XEN)  Start info:    ffffffff83964000->ffffffff839644b4
(XEN)  Page tables:   ffffffff83965000->ffffffff83986000
(XEN)  Boot stack:    ffffffff83986000->ffffffff83987000
(XEN)  TOTAL:         ffffffff80000000->ffffffff83c00000
(XEN)  ENTRY ADDRESS: ffffffff814a0200
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0
(XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98
(XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 228kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:08.1
(XEN) PCI add device 00:08.2
(XEN) PCI add device 00:08.3
(XEN) PCI add device 00:10.0
(XEN) PCI add device 00:10.1
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 03:00.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 02:00.1
(XEN) PCI add device 01:03.0
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0)
(XEN) ==== PCI devices ====
(XEN) ff:05.3 - dom 0   - MSIs < >
(XEN) ff:05.2 - dom 0   - MSIs < >
(XEN) ff:05.1 - dom 0   - MSIs < >
(XEN) ff:05.0 - dom 0   - MSIs < >
(XEN) ff:04.3 - dom 0   - MSIs < >
(XEN) ff:04.2 - dom 0   - MSIs < >
(XEN) ff:04.1 - dom 0   - MSIs < >
(XEN) ff:04.0 - dom 0   - MSIs < >
(XEN) ff:03.4 - dom 0   - MSIs < >
(XEN) ff:03.2 - dom 0   - MSIs < >
(XEN) ff:03.1 - dom 0   - MSIs < >
(XEN) ff:03.0 - dom 0   - MSIs < >
(XEN) ff:02.1 - dom 0   - MSIs < >
(XEN) ff:02.0 - dom 0   - MSIs < >
(XEN) ff:00.1 - dom 0   - MSIs < >
(XEN) ff:00.0 - dom 0   - MSIs < >
(XEN) 03:00.0 - dom 0   - MSIs < >
(XEN) 02:00.1 - dom 0   - MSIs < >
(XEN) 02:00.0 - dom 0   - MSIs < >
(XEN) 01:03.0 - dom 0   - MSIs < >
(XEN) 00:1f.5 - dom 0   - MSIs < >
(XEN) 00:1f.2 - dom 0   - MSIs < >
(XEN) 00:1f.0 - dom 0   - MSIs < >
(XEN) 00:1e.0 - dom 0   - MSIs < >
(XEN) 00:1d.0 - dom 0   - MSIs < >
(XEN) 00:1c.4 - dom 0   - MSIs < 36 >
(XEN) 00:1c.0 - dom 0   - MSIs < 35 >
(XEN) 00:1a.0 - dom 0   - MSIs < >
(XEN) 00:10.1 - dom 0   - MSIs < >
(XEN) 00:10.0 - dom 0   - MSIs < >
(XEN) 00:08.3 - dom 0   - MSIs < >
(XEN) 00:08.2 - dom 0   - MSIs < >
(XEN) 00:08.1 - dom 0   - MSIs < >
(XEN) 00:08.0 - dom 0   - MSIs < >
(XEN) 00:05.0 - dom 0   - MSIs < 34 >
(XEN) 00:03.0 - dom 0   - MSIs < 33 >
(XEN) 00:00.0 - dom 0   - MSIs < >
[disconnect]
Script done on Thu 24 Mar 2011 16:30:23 GMT

[-- Attachment #3: dmidecode.out --]
[-- Type: text/plain, Size: 17785 bytes --]

# dmidecode 2.9
SMBIOS 2.6 present.
66 structures occupying 3175 bytes.
Table at 0xBF79C000.

Handle 0xDA00, DMI type 218, 11 bytes
OEM-specific Type
	Header and Data:
		DA 0B 00 DA B2 00 17 00 0E 20 00

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Dell Inc.
	Version: 1.1.5
	Release Date: 05/24/2010
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 4096 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 KB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 KB floppy services are supported (int 13h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Function key-initiated network boot is supported
		Targeted content distribution is supported
	BIOS Revision: 1.1

Handle 0x0100, DMI type 1, 27 bytes
System Information
	Manufacturer: Dell Inc.
	Product Name: PowerEdge R310
	Version: Not Specified
	Serial Number: 7V8CW4J
	UUID: 44454C4C-5600-1038-8043-B7C04F57344A
	Wake-up Type: Power Switch
	SKU Number: Not Specified
	Family: Not Specified

Handle 0x0200, DMI type 2, 9 bytes
Base Board Information
	Manufacturer: Dell Inc.
	Product Name: 05XKKK
	Version: A00
	Serial Number: ..CN1374008H00Q0.

Handle 0x0300, DMI type 3, 21 bytes
Chassis Information
	Manufacturer: Dell Inc.
	Type: Rack Mount Chassis
	Lock: Present
	Version: Not Specified
	Serial Number: 7V8CW4J
	Asset Tag: Not Specified
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: Unknown
	OEM Information: 0x00000000
	Height: 1 U
	Number Of Power Cords: Unspecified
	Contained Elements: 0

Handle 0x0400, DMI type 4, 40 bytes
Processor Information
	Socket Designation: CPU1
	Type: Central Processor
	Family: Xeon
	Manufacturer: Intel
	ID: E5 06 01 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 30, Stepping 5
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Hyper-threading technology)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Xeon(R) CPU           X3450  @ 2.67GHz
	Voltage: 1.2 V
	External Clock: 4800 MHz
	Max Speed: 3600 MHz
	Current Speed: 2666 MHz
	Status: Populated, Enabled
	Upgrade: <OUT OF SPEC>
	L1 Cache Handle: 0x0700
	L2 Cache Handle: 0x0701
	L3 Cache Handle: 0x0702
	Serial Number: Not Specified
	Asset Tag: Not Specified
	Part Number: Not Specified
	Core Count: 4
	Core Enabled: 4
	Thread Count: 8
	Characteristics:
		64-bit capable

Handle 0x0700, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 128 KB
	Maximum Size: 128 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Data
	Associativity: 8-way Set-associative

Handle 0x0701, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 1024 KB
	Maximum Size: 2048 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x0702, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Not Specified
	Configuration: Enabled, Not Socketed, Level 3
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 8192 KB
	Maximum Size: 8192 KB
	Supported SRAM Types:
		Unknown
	Installed SRAM Type: Unknown
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Unified
	Associativity: 16-way Set-associative

Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-15 female
	Port Type: Video Port

Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-15 female
	Port Type: Video Port

Handle 0x0802, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0803, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0804, DMI type 126, 9 bytes
Inactive

Handle 0x0805, DMI type 126, 9 bytes
Inactive

Handle 0x0806, DMI type 126, 9 bytes
Inactive

Handle 0x0807, DMI type 126, 9 bytes
Inactive

Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_USB1
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_USB2
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_SATA1
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_SATA2
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_SATA3
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_SATA4
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: INT_SATA5
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0811, DMI type 126, 9 bytes
Inactive

Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x0813, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x0814, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Not Specified
	Internal Connector Type: None
	External Reference Designator: Not Specified
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0900, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIE1
	Type: x8 <OUT OF SPEC>
	Current Usage: Available
	Length: Long
	Characteristics:
		3.3 V is provided
		PME signal is supported

Handle 0x0901, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIE2
	Type: x8 <OUT OF SPEC>
	Current Usage: Available
	Length: Long
	Characteristics:
		3.3 V is provided
		PME signal is supported

Handle 0x0902, DMI type 126, 17 bytes
Inactive

Handle 0x0903, DMI type 126, 17 bytes
Inactive

Handle 0x0904, DMI type 126, 17 bytes
Inactive

Handle 0x0A00, DMI type 10, 12 bytes
On Board Device 1 Information
	Type: Video
	Status: Enabled
	Description: Embedded Matrox G200 Video
On Board Device 2 Information
	Type: Ethernet
	Status: Enabled
	Description: Embedded Broadcom 5716 NIC 1
On Board Device 3 Information
	Type: Ethernet
	Status: Enabled
	Description: Embedded Broadcom 5716 NIC 2
On Board Device 4 Information
	Type: SAS Controller
	Status: Enabled
	Description: Integrated SAS Controller 

Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
	String 1: Dell System
	String 2: 5[0000]

Handle 0x7E00, DMI type 126, 170 bytes
Inactive

Handle 0x0C00, DMI type 12, 5 bytes
System Configuration Options
	Option 1: NVRAM_CLR:  Clear user settable NVRAM areas and set defaults
	Option 2: PWRD_EN:  Close to enable password

Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1

Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: Multi-bit ECC
	Maximum Capacity: 32 GB
	Error Information Handle: Not Provided
	Number Of Devices: 6

Handle 0x1100, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: 1
	Locator: DIMM_A1 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 1333 MHz (0.8 ns)
	Manufacturer: 00AD000080AD
	Serial Number: 0FA35777
	Asset Tag: 01103000
	Part Number: HMT125U7TFR8C-H9  

Handle 0x1101, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: 1
	Locator: DIMM_A2 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 1333 MHz (0.8 ns)
	Manufacturer: 00AD000080AD
	Serial Number: 0F635782
	Asset Tag: 01103000
	Part Number: HMT125U7TFR8C-H9  

Handle 0x1102, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: 2
	Locator: DIMM_A3 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 1333 MHz (0.8 ns)
	Manufacturer: 00AD000080AD
	Serial Number: 0F23577E
	Asset Tag: 01103000
	Part Number: HMT125U7TFR8C-H9  

Handle 0x1103, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: 2
	Locator: DIMM_A4 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 1333 MHz (0.8 ns)
	Manufacturer: 00AD000080AD
	Serial Number: 0F535115
	Asset Tag: 01103000
	Part Number: HMT125U7TFR8C-H9  

Handle 0x1104, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: 3
	Locator: DIMM_A5 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer:             
	Serial Number:         
	Asset Tag:         
	Part Number:                   

Handle 0x1105, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x1000
	Error Information Handle: Not Provided
	Total Width: 72 bits
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: 3
	Locator: DIMM_A6 
	Bank Locator: Not Specified
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer:             
	Serial Number:         
	Asset Tag:         
	Part Number:                   

Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000BFFFFFFF
	Range Size: 3 GB
	Physical Array Handle: 0x1000
	Partition Width: 0

Handle 0x1301, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00100000000
	Ending Address: 0x0023FFFFFFF
	Range Size: 5 GB
	Physical Array Handle: 0x1000
	Partition Width: 0

Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

Handle 0x2600, DMI type 38, 18 bytes
IPMI Device Information
	Interface Type: KCS (Keyboard Control Style)
	Specification Version: 2.0
	I2C Slave Address: 0x10
	NV Storage Device: Not Present
	Base Address: 0x0000000000000CA8 (I/O)
	Register Spacing: 32-bit Boundaries

Handle 0x2900, DMI type 41, 11 bytes
Unknown Type
	Header and Data:
		29 0B 00 29 01 85 01 00 00 02 00
	Strings:
		Embedded NIC 1                          

Handle 0x2901, DMI type 41, 11 bytes
Unknown Type
	Header and Data:
		29 0B 01 29 01 85 02 00 00 02 01
	Strings:
		Embedded NIC 2                          

Handle 0x2902, DMI type 41, 11 bytes
Unknown Type
	Header and Data:
		29 0B 02 29 01 8A 04 00 00 03 00
	Strings:
		Integrated SAS                          

Handle 0x2903, DMI type 126, 11 bytes
Inactive

Handle 0x2904, DMI type 41, 11 bytes
Unknown Type
	Header and Data:
		29 0B 04 29 01 83 04 00 00 01 18
	Strings:
		Embedded Video                          

Handle 0xD000, DMI type 208, 16 bytes
OEM-specific Type
	Header and Data:
		D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00

Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
	Header and Data:
		D2 0C 00 D2 F8 03 04 03 06 80 04 05

Handle 0xD400, DMI type 212, 87 bytes
OEM-specific Type
	Header and Data:
		D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
		01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00
		00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32
		40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00
		26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26
		DF 00 FF FF 00 00 00

Handle 0xD401, DMI type 212, 242 bytes
OEM-specific Type
	Header and Data:
		D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF
		40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01
		6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77
		01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01
		54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54
		CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB
		00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20
		42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E
		00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40
		58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58
		F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE
		00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00
		57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D
		01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0
		67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00
		00 00

Handle 0xD402, DMI type 212, 172 bytes
OEM-specific Type
	Header and Data:
		D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00
		02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00
		00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26
		40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01
		4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A
		FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7
		08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00
		00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39
		01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40
		46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45
		7F 80 00 00 45 7F 00 FF FF 00 00 00

Handle 0xD403, DMI type 212, 97 bytes
OEM-specific Type
	Header and Data:
		D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE
		00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00
		EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32
		02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02
		47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E
		CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00
		00

Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
	Header and Data:
		D8 09 00 D8 01 02 01 00 00
	Strings:
		MATROX
		VGA/VBE BIOS, Version V3.8WO

Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
	Header and Data:
		DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01

Handle 0xE100, DMI type 225, 33 bytes
OEM-specific Type
	Header and Data:
		E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11
		00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11
		00
	Strings:
		CPU.Socket.1
		DIMM.Socket.A1
		DIMM.Socket.A2
		DIMM.Socket.A3
		DIMM.Socket.A4
		DIMM.Socket.A5
		DIMM.Socket.A6

Handle 0x7F00, DMI type 127, 4 bytes
End Of Table


[-- Attachment #4: lspci.out --]
[-- Type: text/plain, Size: 25671 bytes --]

00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11)
	Subsystem: Dell Device 02a3
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [150] Access Controls <?>
	Capabilities: [160] Vendor Specific Information <?>

00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Dell Device 02a3
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+
		Address: feeff00c  Data: 4151
		Masking: 00000002  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  1, PowerLimit 25.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [150] Access Controls <?>
	Capabilities: [160] Vendor Specific Information <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 3 (rev 11) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Dell Device 02a3
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+
		Address: feeff00c  Data: 4159
		Masking: 00000002  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  2, PowerLimit 25.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [150] Access Controls <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Vendor Specific Information <?>

00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Vendor Specific Information <?>

00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Vendor Specific Information <?>

00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.0 System peripheral: Intel Corporation Device d150 (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.1 System peripheral: Intel Corporation Device d151 (rev 11)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 02a3
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCIe advanced features <?>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff
	Memory behind bridge: df100000-df2fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: feeff00c  Data: 4161
	Capabilities: [90] Subsystem: Dell Device 02a3
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: da000000-ddffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: feeff00c  Data: 4169
	Capabilities: [90] Subsystem: Dell Device 02a3
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 02a3
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCIe advanced features <?>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: de000000-deffffff
	Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Dell Device 02a3

00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05)
	Subsystem: Dell Device 02a3
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>

00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Dell Device 02a3
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at eca0 [size=8]
	Region 1: I/O ports at ec90 [size=4]
	Region 2: I/O ports at eca8 [size=8]
	Region 3: I/O ports at ec94 [size=4]
	Region 4: I/O ports at ecc0 [size=16]
	Region 5: I/O ports at ecd0 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix
	Kernel modules: ata_generic, ata_piix, ide-pci-generic

00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
	Subsystem: Dell Device 02a3
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 0: I/O ports at ecb0 [size=8]
	Region 1: I/O ports at ec98 [size=4]
	Region 2: I/O ports at ecb8 [size=8]
	Region 3: I/O ports at ec9c [size=4]
	Region 4: I/O ports at ece0 [size=16]
	Region 5: I/O ports at ecf0 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix
	Kernel modules: ata_generic, ata_piix, ide-pci-generic

01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 02a3
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 6
	Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
	Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
	[virtual] Expansion ROM at de000000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
	Subsystem: Dell Device 02a3
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data <?>
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9
		Vector table: BAR=0 offset=0000c000
		PBA: BAR=0 offset=0000e000
	Capabilities: [ac] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84
	Capabilities: [110] Advanced Error Reporting <?>
	Capabilities: [150] Power Budgeting <?>
	Capabilities: [160] Virtual Channel <?>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
	Subsystem: Dell Device 02a3
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data <?>
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9
		Vector table: BAR=0 offset=0000c000
		PBA: BAR=0 offset=0000e000
	Capabilities: [ac] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84
	Capabilities: [110] Advanced Error Reporting <?>
	Capabilities: [150] Power Budgeting <?>
	Capabilities: [160] Virtual Channel <?>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
	Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 1275
	Region 0: I/O ports at fc00 [size=256]
	Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at df100000 [disabled] [size=1M]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
		Address: 00000000feeff00c  Data: 4181
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=1 offset=00002000
		PBA: BAR=1 offset=00003000
	Capabilities: [100] Advanced Error Reporting <?>
	Kernel driver in use: mptsas
	Kernel modules: mptsas


[-- Attachment #5: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-03-27  1:57 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-24 17:39 Xen 4.2 unstable + Jeremy's stable/2.6.32.x Goncalo Gomes
2011-03-25 14:49 ` Konrad Rzeszutek Wilk
2011-03-25 15:34   ` Goncalo Gomes
2011-03-25 16:42     ` Konrad Rzeszutek Wilk
2011-03-27  1:57       ` Goncalo Gomes

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).