Re: ATI/AMD VGA passthru report

["Pavel Matěja" <pavel@netsafe.cz>]

[-- Attachment #1: Type: Text/Plain, Size: 1484 bytes --]

On Mon 7. of May 2012 13:45:23 Pavel Matěja wrote:
> Hi,
> I'm trying to run AMD VGA passthru on latest XEN unstable with latest
> kernel. I already have working setup with ancient xen-devel 4.2 and
> 2.6.32.x xenified kernel. See attached log.
> 
> So I tried just to update and patch xen and kernel, but I had no luck so
> far.
> 
> Xen has ati_vbios_patch_respin.txt sent to xen-devel by Wei Huang recently.
> http://lists.xen.org/archives/html/xen-devel/2012-04/msg00291.html
> 
> I tried two kernels
> testing-3.5-with-extra and xen/next-3.2 from
> git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git
> and
> git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> Both with ioperm opcode patch which is required by the ATI patch. See
> attachement.
> 
> The xen/next-3.2 branch kernel was able to start booting windows.
> With Catalyst driver installed I just saw bluescreen during Windows boot.
> Without Catalyst driver Windows were able to boot but Windows ended frozen
> or USB was not working. It was hard to tell because input devices had no
> response at all.
> 
> The testing-3.5-with-extra (reported as 3.4.0-rc4) just crashed dom0 kernel
> during Windows boot. I guess I have to rework the io_bitmap patch somehow.

Hmm, I just tried the http://xenbits.xen.org/staging/xen-4.1-testing.hg (tag 
4.1.3-rc1) and the 3.2 with both patches mentioned above and Windows booted 
just fine.
Log is attached.
-- 
Pavel Mateja

[-- Attachment #2: xen-4.1.log --]
[-- Type: text/x-log, Size: 49887 bytes --]

 __  __            _  _    _   _____             _ 
 \ \/ /___ _ __   | || |  / | |___ /    _ __ ___/ |
  \  // _ \ '_ \  | || |_ | |   |_ \ __| '__/ __| |
  /  \  __/ | | | |__   _|| |_ ___) |__| | | (__| |
 /_/\_\___|_| |_|    |_|(_)_(_)____/   |_|  \___|_|
                                                   
(XEN) Xen version 4.1.3-rc1 (root@(none)) (gcc version 4.4.5 (Debian 4.4.5-8) ) Mon May  7 15:26:18 CEST 2012
(XEN) Latest ChangeSet: Mon May 07 13:44:08 2012 +0100 23290:513ca342fd86
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1
(XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009ac00 (usable)
(XEN)  000000000009ac00 - 00000000000a0000 (reserved)
(XEN)  00000000000e4000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cfe80000 (usable)
(XEN)  00000000cfe80000 - 00000000cfe98000 (ACPI data)
(XEN)  00000000cfe98000 - 00000000cfec0000 (ACPI NVS)
(XEN)  00000000cfec0000 - 00000000cff00000 (reserved)
(XEN)  00000000ffe00000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000230000000 (usable)
(XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT       97)
(XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT       97)
(XEN) ACPI: DSDT CFE80470, E6E3 (r1  A1595 A1595000        0 INTL 20060113)
(XEN) ACPI: FACS CFE98000, 0040
(XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT       97)
(XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG  20111028 MSFT       97)
(XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT       97)
(XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET  20111028 MSFT       97)
(XEN) ACPI: IVRS CFE8F900, 00E0 (r1  AMD     RD890S   202031 AMD         0)
(XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I  POWERNOW        1 AMD         1)
(XEN) System RAM: 8190MB (8386664kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000230000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:                  wakeup_vec[cfe9800c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3010.281 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) AMD-Vi: Enabling global vector map
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer appears to have unexpectedly wrapped 10 or more times.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN)  - Nested Page Tables (NPT)
(XEN)  - Last Branch Record (LBR) Virtualisation
(XEN)  - Next-RIP Saved on #VMEXIT
(XEN)  - Pause-Intercept Filter
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 6 CPUs
(XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is enabled.
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding to adjust polling frequency
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1847000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000226000000->0000000228000000 (514500 pages to be allocated)
(XEN)  Init. ramdisk: 000000022f9c4000->000000022ffff200
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81847000
(XEN)  Init. ramdisk: ffffffff81847000->ffffffff81e82200
(XEN)  Phys-Mach map: ffffffff81e83000->ffffffff82283000
(XEN)  Start info:    ffffffff82283000->ffffffff822834b4
(XEN)  Page tables:   ffffffff82284000->ffffffff82299000
(XEN)  Boot stack:    ffffffff82299000->ffffffff8229a000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82400000
(XEN)  ENTRY ADDRESS: ffffffff8162c200
(XEN) Dom0 has maximum 6 VCPUs
(XEN) Scrubbing Free RAM: .............................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1... 
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 216kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-rc2-11202-gd3507af-dirty (root@xen) (gcc version 4.4.5 (Debian 4.4.5-8) ) #6 SMP PREEMPT Sat May 5 20:13:29 CEST 2012
Command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G panic=15 xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen
Freeing  9a-100 pfn range: 102 pages freed
Released 102 pages of unused memory
Set 197094 page(s) to 1-1 mapping
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 000000000009a000 (usable)
 Xen: 000000000009ac00 - 0000000000100000 (reserved)
 Xen: 0000000000100000 - 00000000cfe80000 (usable)
 Xen: 00000000cfe80000 - 00000000cfe98000 (ACPI data)
 Xen: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS)
 Xen: 00000000cfec0000 - 00000000cff00000 (reserved)
 Xen: 00000000fec00000 - 00000000fec01000 (reserved)
 Xen: 00000000fec20000 - 00000000fec21000 (reserved)
 Xen: 00000000fee00000 - 00000000fee01000 (reserved)
 Xen: 00000000ffe00000 - 0000000100000000 (reserved)
 Xen: 0000000100000000 - 0000000230000000 (usable)
bootconsole [xenboot0] enabled
NX (Execute Disable) protection: active
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009a000 (usable)
 user: 000000000009ac00 - 0000000000100000 (reserved)
 user: 0000000000100000 - 0000000080000000 (usable)
 user: 00000000cfe80000 - 00000000cfe98000 (ACPI data)
 user: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS)
 user: 00000000cfec0000 - 00000000cff00000 (reserved)
 user: 00000000fec00000 - 00000000fec01000 (reserved)
 user: 00000000fec20000 - 00000000fec21000 (reserved)
 user: 00000000fee00000 - 00000000fee01000 (reserved)
 user: 00000000ffe00000 - 0000000100000000 (reserved)
DMI present.
No AGP bridge found
last_pfn = 0x80000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-0000000080000000
RAMDISK: 01847000 - 01e83000
ACPI: RSDP 00000000000fbf20 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe80100 0005C (v01 102811 XSDT1740 20111028 MSFT 00000097)
ACPI: FACP 00000000cfe80290 000F4 (v03 102811 FACP1740 20111028 MSFT 00000097)
ACPI: DSDT 00000000cfe80470 0E6E3 (v01  A1595 A1595000 00000000 INTL 20060113)
ACPI: FACS 00000000cfe98000 00040
ACPI: APIC 00000000cfe80390 00098 (v01 102811 APIC1740 20111028 MSFT 00000097)
ACPI: MCFG 00000000cfe80430 0003C (v01 102811 OEMMCFG  20111028 MSFT 00000097)
ACPI: OEMB 00000000cfe98040 00072 (v01 102811 OEMB1740 20111028 MSFT 00000097)
ACPI: HPET 00000000cfe8f8c0 00038 (v01 102811 OEMHPET  20111028 MSFT 00000097)
ACPI: IVRS 00000000cfe8f900 000E0 (v01  AMD     RD890S 00202031 AMD  00000000)
ACPI: SSDT 00000000cfe8f9e0 00E10 (v01 A M I  POWERNOW 00000001 AMD  00000001)
No NUMA configuration found
Faking a node at 0000000000000000-0000000080000000
Initmem setup node 0 0000000000000000-0000000080000000
  NODE_DATA [000000007fffb000 - 000000007fffffff]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009a
    0: 0x00000100 -> 0x00080000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 0-255
ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
8 Processors exceeds NR_CPUS limit of 6
SMP: Allowing 6 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at 80000000 (gap: 80000000:4fe80000)
Booting paravirtualized kernel on Xen
Xen version: 4.1.3-rc1 (preserve-AD)
setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007ff4b000 s75008 r8192 d23296 u106496
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514973
Policy zone: DMA32
Kernel command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G panic=15 xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen
PID hash table entries: 4096 (order: 3, 32768 bytes)
Placing 64MB software IO TLB between ffff880079600000 - ffff88007d600000
software IO TLB at phys 0x79600000 - 0x7d600000
Memory: 1975220k/2097152k available (4470k kernel code, 472k absent, 121460k reserved, 1768k data, 596k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:1536 16
xen: sci override: global_irq=9 trigger=0 polarity=1
xen: acpi sci 9
xen_map_pirq_gsi: returning irq 9 for gsi 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
installing Xen timer for CPU 0
Detected 3010.280 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6020.56 BogoMIPS (lpj=3010280)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20110623
cpu 0 spinlock event irq 297
Performance Events: (XEN) traps.c:2488:d0 Domain attempted WRMSR 00000000c0010004 from 0x000025a74db06414 to 0x000000000000abcd.
Broken PMU hardware detected, using software events only.
MCE: In-kernel MCE decoding enabled.
installing Xen timer for CPU 1
cpu 1 spinlock event irq 303
installing Xen timer for CPU 2
cpu 2 spinlock event irq 309
installing Xen timer for CPU 3
cpu 3 spinlock event irq 315
installing Xen timer for CPU 4
cpu 4 spinlock event irq 321
installing Xen timer for CPU 5
cpu 5 spinlock event irq 327
Brought up 6 CPUs
devtmpfs: initialized
Grant table initialized
NET: Registered protocol family 16
TOM: 00000000d0000000 aka 3328M
TOM2: 0000000230000000 aka 8960M
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:02.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 06-06]
pci 0000:00:05.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1c) granted
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:00.2
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:04.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:06.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:0d.0
(XEN) PCI add device 00:11.0
(XEN) PCI add device 00:12.0
(XEN) PCI add device 00:12.2
(XEN) PCI add device 00:13.0
(XEN) PCI add device 00:13.2
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:14.4
(XEN) PCI add device 00:14.5
(XEN) PCI add device 00:16.0
(XEN) PCI add device 00:16.2
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 07:00.0
(XEN) PCI add device 07:00.1
(XEN) PCI add device 06:00.0
(XEN) PCI add device 06:00.1
pci 0000:06:00.1: Failed to add - passthrough or MSI/MSI-X might fail!
(XEN) PCI add device 05:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 03:00.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 02:00.1
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
xen_map_pirq_gsi: returning irq 8 for gsi 8
xen_map_pirq_gsi: returning irq 13 for gsi 13
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x040b] has been reserved
system 00:09: [io  0x04d6] has been reserved
system 00:09: [io  0x0c00-0x0c01] has been reserved
system 00:09: [io  0x0c14] has been reserved
system 00:09: [io  0x0c50-0x0c51] has been reserved
system 00:09: [io  0x0c52] has been reserved
system 00:09: [io  0x0c6c] has been reserved
system 00:09: [io  0x0c6f] has been reserved
system 00:09: [io  0x0cd0-0x0cd1] has been reserved
system 00:09: [io  0x0cd2-0x0cd3] has been reserved
system 00:09: [io  0x0cd4-0x0cd5] has been reserved
system 00:09: [io  0x0cd6-0x0cd7] has been reserved
system 00:09: [io  0x0cd8-0x0cdf] has been reserved
system 00:09: [io  0x0800-0x089f] has been reserved
system 00:09: [io  0x0b00-0x0b1f] has been reserved
system 00:09: [io  0x0b20-0x0b3f] has been reserved
system 00:09: [io  0x0900-0x090f] has been reserved
system 00:09: [io  0x0910-0x091f] has been reserved
system 00:09: [io  0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:0a: [io  0x0230-0x023f] has been reserved
system 00:0a: [io  0x0290-0x029f] has been reserved
system 00:0a: [io  0x0f40-0x0f4f] has been reserved
system 00:0a: [io  0x0a30-0x0a3f] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pciback 0000:00:14.2: seizing device
PM-Timer failed consistency check  (0x0xffffff) - aborting.
pci 0000:00:02.0: PCI bridge to [bus 07-07]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 06-06]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:05.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:0d.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
xen_map_pirq_gsi: returning irq 52 for gsi 52
Already setup the GSI :52
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
xen_map_pirq_gsi: returning irq 52 for gsi 52
Already setup the GSI :52
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
xen_map_pirq_gsi: returning irq 53 for gsi 53
Already setup the GSI :53
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 6384k freed
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 3870
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
(XEN) physdev.c:164: dom0: wrong map_pirq type 3
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Event-channel device installed.
pciback 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pciback 0000:00:14.2: PCI INT A disabled
xen-pciback: backend is vpci
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
serial 0000:02:00.1: PCI INT B -> GSI 41 (level, low) -> IRQ 41
0000:02:00.1: ttyS0 at I/O 0xa880 (irq = 41) is a ST16650V2
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
loop: module loaded
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe380 irq 19
ahci 0000:06:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 44
ata8: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 44
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
sky2: driver version 1.29
sky2 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
sky2 0000:04:00.0: eth0: addr 20:cf:30:6d:89:a5
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
firewire_ohci 0000:05:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3fe400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xen_map_pirq_gsi: returning irq 17 for gsi 17
Already setup the GSI :17
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3fe800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xen_map_pirq_gsi: returning irq 17 for gsi 17
Already setup the GSI :17
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3fec00
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
ata1.00: configured for UDMA/133
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3f7000
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xen_map_pirq_gsi: returning irq 18 for gsi 18
Already setup the GSI :18
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
firewire_core: created device fw0: GUID 001e8c0000de9136, S400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
xen_map_pirq_gsi: returning irq 18 for gsi 18
Already setup the GSI :18
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fd000
usb 1-1: New USB device found, idVendor=0424, idProduct=2504
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen_map_pirq_gsi: returning irq 18 for gsi 18
Already setup the GSI :18
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3ff000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe5fe000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums_eneub6250
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
i2c /dev entries driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ATK0110 ATK0110:00: EC enabled
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xb8fe00 already in use
usb 4-2: new full-speed USB device number 2 using ohci_hcd
IT87 WDT: Chip IT8721 revision 1 initialized. timeout=60 sec (nowayout=0 testmode=0 exclusive=1 nogameport=0)
wdt: Xen WatchDog Timer Driver v0.01
wdt: cannot register miscdev on minor=130 (-16)
wdt: probe of wdt failed with error -16
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
rtc_cmos 00:04: setting system clock to 2012-05-07 13:42:51 UTC (1336398171)
powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: invalid pstate 1 - bad value 1.
powernow-k8: Please report to BIOS manufacturer
powernow-k8: invalid pstate 2 - bad value 2.
powernow-k8: Please report to BIOS manufacturer
powernow-k8: invalid pstate 3 - bad value 3.
powernow-k8: Please report to BIOS manufacturer
[Firmware Bug]: powernow-k8: invalid powernow_table
Freeing unused kernel memory: 596k freed
Loading, please wait...
udev[1086]: starting version 164
usb 4-2: New USB device found, idVendor=041e, idProduct=30dc
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Sound Blaster Tactic(3D) Alpha
usb 4-2: Manufacturer: Creative Technology Ltd
usb 4-2: SerialNumber: 00023162
input: Creative Technology Ltd Sound Blaster Tactic(3D) Alpha as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.3/input/input3
generic-usb 0003:041E:30DC.0001: input,hiddev0: USB HID v1.00 Device [Creative Technology Ltd Sound Blaster Tactic(3D) Alpha] on usb-0000:00:12.0-2/input3
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
done.
Begin: Running /scripts/local-premount ... done.
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.1: New USB device found, idVendor=1532, idProduct=0013
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Razer Orochi
usb 1-1.1: Manufacturer: Razer
input: Razer Razer Orochi as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
generic-usb 0003:1532:0013.0002: input: USB HID v1.11 Mouse [Razer Razer Orochi] on usb-0000:00:12.2-1.1/input0
input: Razer Razer Orochi as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.1/input/input5
generic-usb 0003:1532:0013.0003: input: USB HID v1.11 Keyboard [Razer Razer Orochi] on usb-0000:00:12.2-1.1/input1
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
usb 1-1.2: new low-speed USB device number 5 using ehci_hcd
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Files under mount point '/lib/init/rw' will be hidden. ...usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0403
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Keyboard
usb 1-1.2: Manufacturer: Chicony
 (warning).
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
generic-usb 0003:04F2:0403.0004: input: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:12.2-1.2/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input7
generic-usb 0003:04F2:0403.0005: input,hiddev0: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:12.2-1.2/input1
Files under mount point '/var/run' will be hidden. ... (warning).
Files under mount point '/var/lock' will be hidden. ... (warning).
firewire_net: firewire0: IPv4 over FireWire on device 001e8c0000de9136
firewire_core: refreshed device fw0
Starting the hotplug events dispatcher: udevdudev[1280]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting hostname to 'xen'...done.
Setting preliminary keymap...done.
Activating swap:.
EXT4-fs (dm-0): re-mounted. Opts: (null)
Will now check root file system:fsck from util-linux-ng 2.17.2
[/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/mapper/lemrouch-xen 
/dev/mapper/lemrouch-xen: clean, 199611/1310720 files, 1390142/5242880 blocks
.
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
Loading kernel module firewire-sbp2.
Loading kernel module loop.
Cleaning up ifupdown....
Setting up networking....
Setting up LVM Volume Groups  Reading all physical volumes.  This may take a while...
  Found volume group "lemrouch" using metadata type lvm2
  4 logical volume(s) in volume group "lemrouch" now active
.
Will now activate lvm and md swap:done.
Will now check all file systems.
fsck from util-linux-ng 2.17.2
Checking all file systems.
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Will now mount local filesystems:EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
.
Will now activate swapfile swap:done.
Cleaning up temporary files...Cleaning /tmp...done.
.
Checking minimum space in /tmp...done.
Setting kernel variables ... /etc/sysctl.conf...done.
Initializing random number generator...done.
Setting up X server socket directory /tmp/.X11-unix....
Setting up ICE socket directory /tmp/.ICE-unix....
Configuring network interfaces...device eth0 entered promiscuous mode
sky2 0000:04:00.0: eth0: enabling interface
done.
Cleaning up temporary files....
Starting filesystem in userspace: fuse.
Setting console screen modes.
cannot (un)set powersave mode
Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...done.
Setting sensors limits.
INIT: Entering runlevel: 3
Using makefile-style concurrent boot in runlevel 3.
Not starting fancontrol; run pwmconfig first. ... (warning).
acpid: starting up with netlink and the input layer

acpid: 1 rule loaded

acpid: waiting for events: event logging is off

Starting ACPI services....
Starting system message bus: dbus.
sshd (2049): /proc/2049/oom_adj is deprecated, please use /proc/2049/oom_score_adj instead.
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
Starting the Winbind daemon: winbind.
Starting OpenBSD Secure Shell server: sshd.
Starting xenstored...
Setting domain 0 name...
Starting xenconsoled...
Starting domain name service...: bind9.
Starting Samba daemons: nmbd smbd.
Starting periodic command scheduler: cron.
Starting Postfix Mail Transport Agent: postfix.
BLKTAPCTRL[2216]: blktapctrl.c:790: blktapctrl: v1.0.0

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [raw image (aio)]

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [raw image (sync)]

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [vmware image (vmdk)]

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [ramdisk image (ram)]

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [qcow disk (qcow)]

BLKTAPCTRL[2216]: blktapctrl.c:792: Found driver: [qcow2 disk (qcow2)]

BLKTAPCTRL[2216]: blktapctrl_linux.c:86: blktap0 open failed

BLKTAPCTRL[2216]: blktapctrl.c:859: couldn't open blktap interface

BLKTAPCTRL[2216]: blktapctrl.c:922: Unable to start blktapctrl

Starting S.M.A.R.T. daemon: smartd.
sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
Running local boot scripts (/etc/rc.local)(XEN) PCI remove device 00:12.2
acpid: input device has been disconnected

acpid: input device has been disconnected

acpid: input device has been disconnected

(XEN) PCI remove device 00:13.2
(XEN) PCI remove device 00:16.2
(XEN) PCI add device 00:12.2
(XEN) PCI add device 00:13.2
(XEN) PCI add device 00:16.2
[CPU0] failed to set governor name
[CPU1] failed to set governor name
[CPU2] failed to set governor name
[CPU3] failed to set governor name
[CPU4] failed to set governor name
[CPU5] failed to set governor name
.
acpid: input device has been disconnected

acpid: input device has been disconnected

(XEN) domctl.c:1041:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c
(XEN) domctl.c:985:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=3
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=3c4 f_mport=3c4 np=1c
(XEN) HVM1: HVM Loader
(XEN) HVM1: Detected Xen v4.1.3-rc1
(XEN) HVM1: CPU speed is 3010 MHz
(XEN) HVM1: Xenbus rings @0xfeffc000, event channel 7
(XEN) irq.c:264: Dom1 PCI link 0 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:264: Dom1 PCI link 1 changed 0 -> 10
(XEN) HVM1: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:264: Dom1 PCI link 2 changed 0 -> 11
(XEN) HVM1: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:264: Dom1 PCI link 3 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 3 routed to IRQ5
(XEN) HVM1: pci dev 01:3 INTA->IRQ10
(XEN) HVM1: pci dev 03:0 INTA->IRQ5
(XEN) HVM1: pci dev 04:0 INTA->IRQ5
(XEN) HVM1: pci dev 05:0 INTA->IRQ10
(XEN) HVM1: pci dev 06:0 INTB->IRQ5
(XEN) HVM1: pci dev 07:0 INTA->IRQ5
(XEN) HVM1: pci dev 08:0 INTB->IRQ10
(XEN) HVM1: pci dev 09:0 INTA->IRQ10
(XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c
(XEN) domctl.c:985:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000
(XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008
(XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20
(XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004
(XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000
(XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1
(XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001
(XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101
(XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201
(XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241
(XEN) HVM1: Multiprocessor initialisation:
(XEN) HVM1:  - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1:  - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1:  - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1:  - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1:  - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1:  - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done.
(XEN) HVM1: Writing SMBIOS tables ...
(XEN) HVM1: Loading ROMBIOS ...
(XEN) HVM1: 10588 bytes of ROMBIOS high-memory extensions:
(XEN) HVM1:   Relocating to 0xfc000000-0xfc00295c ... done
(XEN) HVM1: Creating MP tables ...
(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...
(XEN) HVM1: Loading PCI Option ROM ...
(XEN) HVM1:  - Manufacturer: http://etherboot.org
(XEN) HVM1:  - Product name: gPXE
(XEN) HVM1: Loading ACPI ...
(XEN) HVM1:  - Lo data: 000ea020-000ea04f
(XEN) HVM1:  - Hi data: fc002c00-fc00eb1f
(XEN) HVM1: vm86 TSS at fc00ec00
(XEN) HVM1: BIOS map:
(XEN) HVM1:  c0000-cffff: VGA BIOS
(XEN) HVM1:  d0000-e1fff: Etherboot ROM
(XEN) HVM1:  eb000-eb209: SMBIOS tables
(XEN) HVM1:  f0000-fffff: Main BIOS
(XEN) HVM1: E820 table:
(XEN) HVM1:  [00]: 00000000:00000000 - 00000000:0009e000: RAM
(XEN) HVM1:  [01]: 00000000:0009e000 - 00000000:0009fc00: RESERVED
(XEN) HVM1:  [02]: 00000000:0009fc00 - 00000000:000a0000: RESERVED
(XEN) HVM1:  HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM1:  [03]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM1:  [04]: 00000000:00100000 - 00000000:e0000000: RAM
(XEN) HVM1:  HOLE: 00000000:e0000000 - 00000000:fc000000
(XEN) HVM1:  [05]: 00000000:fc000000 - 00000001:00000000: RESERVED
(XEN) HVM1:  [06]: 00000001:00000000 - 00000001:20000000: RAM
(XEN) HVM1: Invoking ROMBIOS ...
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: Bochs BIOS - build: 06/23/99
(XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM1: Options: apmbios pcibios eltorito PMM 
(XEN) HVM1: 
(XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes)
(XEN) HVM1: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM1: ata0  slave: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes)
(XEN) HVM1: 
(XEN) HVM1: 
(XEN) HVM1: 
(XEN) HVM1: Press F12 for boot menu.
(XEN) HVM1: 
(XEN) HVM1: Booting from Hard Disk...
(XEN) HVM1: Booting from 0000:7c00
(XEN) irq.c:264: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:264: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:264: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:264: Dom1 PCI link 3 changed 5 -> 0
(XEN) domctl.c:995:d0 memory_map:remove: gfn=e0000 mfn=d0000 nr_mfns=10000
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1020 mfn=fe9e0 nr_mfns=20
(XEN) domctl.c:985:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1069 mfn=f0000 nr_mfns=1
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) grant_table.c:1160:d1 Expanding dom (1) grant table from (4) to (32) frames.
(XEN) irq.c:330: Dom1 callback via changed to GSI 28
(XEN) domctl.c:995:d0 memory_map:remove: gfn=e0000 mfn=d0000 nr_mfns=10000
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1020 mfn=fe9e0 nr_mfns=20
(XEN) domctl.c:985:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1069 mfn=f0000 nr_mfns=1
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) domctl.c:985:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1060 mfn=fe9bc nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1064 mfn=fe3f8 nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1068 mfn=fe3f7 nr_mfns=1
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f1069 mfn=f0000 nr_mfns=1

[-- Attachment #3: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel