xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Subject: Re: [Xen-devel] [PATCH 02/11] xen/x86: Use memblock_reserve for sensitive areas.
Date: Mon, 20 Aug 2012 10:13:05 -0400	[thread overview]
Message-ID: <20120820141305.GA2713@phenom.dumpdata.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1208171835010.15568@kaball.uk.xensource.com>

On Fri, Aug 17, 2012 at 06:35:12PM +0100, Stefano Stabellini wrote:
> On Thu, 16 Aug 2012, Konrad Rzeszutek Wilk wrote:
> > instead of a big memblock_reserve. This way we can be more
> > selective in freeing regions (and it also makes it easier
> > to understand where is what).
> > 
> > [v1: Move the auto_translate_physmap to proper line]
> > [v2: Per Stefano suggestion add more comments]
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> much better now!

Thought interestingly enough it breaks 32-bit dom0s (and only dom0s).
Will have a revised patch posted shortly.

> 
> >  arch/x86/xen/enlighten.c |   48 ++++++++++++++++++++++++++++++++++++++++++++++
> >  arch/x86/xen/p2m.c       |    5 ++++
> >  arch/x86/xen/setup.c     |    9 --------
> >  3 files changed, 53 insertions(+), 9 deletions(-)
> > 
> > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> > index ff962d4..e532eb5 100644
> > --- a/arch/x86/xen/enlighten.c
> > +++ b/arch/x86/xen/enlighten.c
> > @@ -998,7 +998,54 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
> >  
> >  	return ret;
> >  }
> > +/*
> > + * If the MFN is not in the m2p (provided to us by the hypervisor) this
> > + * function won't do anything. In practice this means that the XenBus
> > + * MFN won't be available for the initial domain. */
> > +static void __init xen_reserve_mfn(unsigned long mfn)
> > +{
> > +	unsigned long pfn;
> > +
> > +	if (!mfn)
> > +		return;
> > +	pfn = mfn_to_pfn(mfn);
> > +	if (phys_to_machine_mapping_valid(pfn))
> > +		memblock_reserve(PFN_PHYS(pfn), PAGE_SIZE);
> > +}
> > +static void __init xen_reserve_internals(void)
> > +{
> > +	unsigned long size;
> > +
> > +	if (!xen_pv_domain())
> > +		return;
> > +
> > +	/* xen_start_info does not exist in the M2P, hence can't use
> > +	 * xen_reserve_mfn. */
> > +	memblock_reserve(__pa(xen_start_info), PAGE_SIZE);
> > +
> > +	xen_reserve_mfn(PFN_DOWN(xen_start_info->shared_info));
> > +	xen_reserve_mfn(xen_start_info->store_mfn);
> >  
> > +	if (!xen_initial_domain())
> > +		xen_reserve_mfn(xen_start_info->console.domU.mfn);
> > +
> > +	if (xen_feature(XENFEAT_auto_translated_physmap))
> > +		return;
> > +
> > +	/*
> > +	 * ALIGN up to compensate for the p2m_page pointing to an array that
> > +	 * can partially filled (look in xen_build_dynamic_phys_to_machine).
> > +	 */
> > +
> > +	size = PAGE_ALIGN(xen_start_info->nr_pages * sizeof(unsigned long));
> > +
> > +	/* We could use xen_reserve_mfn here, but would end up looping quite
> > +	 * a lot (and call memblock_reserve for each PAGE), so lets just use
> > +	 * the easy way and reserve it wholesale. */
> > +	memblock_reserve(__pa(xen_start_info->mfn_list), size);
> > +
> > +	/* The pagetables are reserved in mmu.c */
> > +}
> >  void xen_setup_shared_info(void)
> >  {
> >  	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
> > @@ -1362,6 +1409,7 @@ asmlinkage void __init xen_start_kernel(void)
> >  	xen_raw_console_write("mapping kernel into physical memory\n");
> >  	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
> >  
> > +	xen_reserve_internals();
> >  	/* Allocate and initialize top and mid mfn levels for p2m structure */
> >  	xen_build_mfn_list_list();
> >  
> > diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
> > index e4adbfb..6a2bfa4 100644
> > --- a/arch/x86/xen/p2m.c
> > +++ b/arch/x86/xen/p2m.c
> > @@ -388,6 +388,11 @@ void __init xen_build_dynamic_phys_to_machine(void)
> >  	}
> >  
> >  	m2p_override_init();
> > +
> > +	/* NOTE: We cannot call memblock_reserve here for the mfn_list as there
> > +	 * isn't enough pieces to make it work (for one - we are still using the
> > +	 * Xen provided pagetable). Do it later in xen_reserve_internals.
> > +	 */
> >  }
> >  
> >  unsigned long get_phys_to_machine(unsigned long pfn)
> > diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
> > index a4790bf..9efca75 100644
> > --- a/arch/x86/xen/setup.c
> > +++ b/arch/x86/xen/setup.c
> > @@ -424,15 +424,6 @@ char * __init xen_memory_setup(void)
> >  	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
> >  			E820_RESERVED);
> >  
> > -	/*
> > -	 * Reserve Xen bits:
> > -	 *  - mfn_list
> > -	 *  - xen_start_info
> > -	 * See comment above "struct start_info" in <xen/interface/xen.h>
> > -	 */
> > -	memblock_reserve(__pa(xen_start_info->mfn_list),
> > -			 xen_start_info->pt_base - xen_start_info->mfn_list);
> > -
> >  	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
> >  
> >  	return "Xen";
> > -- 
> > 1.7.7.6
> > 
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xen.org
> > http://lists.xen.org/xen-devel
> > 

  reply	other threads:[~2012-08-20 14:13 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-16 16:03 [PATCH] Boot PV guests with more than 128GB (v3) for v3.7 Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 01/11] xen/p2m: Fix the comment describing the P2M tree Konrad Rzeszutek Wilk
2012-08-17 17:29   ` [Xen-devel] " Stefano Stabellini
2012-08-16 16:03 ` [PATCH 02/11] xen/x86: Use memblock_reserve for sensitive areas Konrad Rzeszutek Wilk
2012-08-17 17:35   ` [Xen-devel] " Stefano Stabellini
2012-08-20 14:13     ` Konrad Rzeszutek Wilk [this message]
2012-08-21 17:27       ` Q:pt_base in COMPAT mode offset by two pages. Was:Re: " Konrad Rzeszutek Wilk
2012-08-21 19:03         ` Konrad Rzeszutek Wilk
2012-08-22 10:48           ` Stefano Stabellini
2012-08-22 14:00             ` Konrad Rzeszutek Wilk
2012-08-22 14:12           ` Jan Beulich
2012-08-22 14:41             ` Stefano Stabellini
2012-08-22 14:57             ` Konrad Rzeszutek Wilk
2012-08-22 15:59           ` Jan Beulich
2012-08-22 16:21             ` Konrad Rzeszutek Wilk
2012-08-22 18:55             ` [Xen-devel] Q:pt_base in COMPAT mode offset by two pages. Was:Re: " Konrad Rzeszutek Wilk
2012-08-23  6:23               ` Jan Beulich
2012-08-16 16:03 ` [PATCH 03/11] xen/mmu: The xen_setup_kernel_pagetable doesn't need to return anything Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 04/11] xen/mmu: Provide comments describing the _ka and _va aliasing issue Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 05/11] xen/mmu: use copy_page instead of memcpy Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 06/11] xen/mmu: For 64-bit do not call xen_map_identity_early Konrad Rzeszutek Wilk
2012-08-17 17:41   ` [Xen-devel] " Stefano Stabellini
2012-08-17 17:45     ` Konrad Rzeszutek Wilk
2012-08-20 11:45       ` Stefano Stabellini
2012-08-20 11:53         ` Ian Campbell
2012-08-20 11:58           ` Stefano Stabellini
2012-08-20 12:06             ` Konrad Rzeszutek Wilk
2012-08-20 12:19               ` Stefano Stabellini
2012-08-23 15:40             ` Konrad Rzeszutek Wilk
2012-08-23 15:57               ` Stefano Stabellini
2012-08-16 16:03 ` [PATCH 07/11] xen/mmu: Recycle the Xen provided L4, L3, and L2 pages Konrad Rzeszutek Wilk
2012-08-17 18:07   ` [Xen-devel] " Stefano Stabellini
2012-08-17 18:05     ` Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 08/11] xen/p2m: Add logic to revector a P2M tree to use __va leafs Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 09/11] xen/mmu: Copy and revector the P2M tree Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 10/11] xen/mmu: Remove from __ka space PMD entries for pagetables Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 11/11] xen/mmu: Release just the MFN list, not MFN list and part of pagetables Konrad Rzeszutek Wilk
2012-08-21 14:18   ` [Xen-devel] " Stefano Stabellini
2012-08-21 14:57     ` Konrad Rzeszutek Wilk
2012-08-21 15:27       ` Stefano Stabellini
2012-09-17 18:06   ` William Dauchy
2012-09-17 18:18     ` Konrad Rzeszutek Wilk
2012-08-17 17:39 ` [PATCH] Boot PV guests with more than 128GB (v3) for v3.7 Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120820141305.GA2713@phenom.dumpdata.com \
    --to=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).