* Xen 4.2 with EFI on IBM x3650 ACPI Bug
@ 2012-10-11 4:09 Allan Scheid
2012-10-15 10:53 ` Jan Beulich
0 siblings, 1 reply; 10+ messages in thread
From: Allan Scheid @ 2012-10-11 4:09 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 44064 bytes --]
Hellow all, i need help to fix this bug:
ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219)
Because of this first errors i get this after, and it causes don't work USB
ports and some PCI cards on the system:
can't find IRQ for PCI INT A; please try using pci=biosirq
Kernel: 3.6.1-xen self compiled (work perfect without xen multiboot)
Xen Version: 4.2
Grub2 EFI: 1.99-23
Debian Unstable distro
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.1-xen (root@lca-fw) (gcc version 4.7.1
(Debian 4.7.1-7) ) #1 SMP Wed Oct 10 22:46:05 BRT 2012
[ 0.000000] Command line: placeholder root=/dev/mapper/xen-fw_root ro
[ 0.000000] Freeing 6c-6d pfn range: 1 pages freed
[ 0.000000] 1-1 mapping on 6c->6d
[ 0.000000] Freeing 9f-100 pfn range: 97 pages freed
[ 0.000000] 1-1 mapping on 9f->100
[ 0.000000] Freeing 7acb7-7ccb8 pfn range: 8193 pages freed
[ 0.000000] 1-1 mapping on 7acb7->7ccb8
[ 0.000000] Freeing 7d4f0-7d51b pfn range: 43 pages freed
[ 0.000000] 1-1 mapping on 7d4f0->7d51b
[ 0.000000] Freeing 7d53f-7d56a pfn range: 43 pages freed
[ 0.000000] 1-1 mapping on 7d53f->7d56a
[ 0.000000] Freeing 7d704-7d7b4 pfn range: 176 pages freed
[ 0.000000] 1-1 mapping on 7d704->7d7b4
[ 0.000000] Freeing 7f5ef-7f7ff pfn range: 528 pages freed
[ 0.000000] 1-1 mapping on 7f5ef->7f7ff
[ 0.000000] Freeing 7f800-f258d pfn range: 470413 pages freed
[ 0.000000] 1-1 mapping on 7f800->100000
[ 0.000000] Released 479494 pages of unused memory
[ 0.000000] Set 535417 page(s) to 1-1 mapping
[ 0.000000] Populating 100000-175106 pfn range: 479494 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000006bfff] usable
[ 0.000000] Xen: [mem 0x000000000006c000-0x000000000006cfff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000000006d000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000007acb6fff] usable
[ 0.000000] Xen: [mem 0x000000007acb7000-0x000000007ccb7fff] reserved
[ 0.000000] Xen: [mem 0x000000007ccb8000-0x000000007d4effff] usable
[ 0.000000] Xen: [mem 0x000000007d4f0000-0x000000007d51afff] reserved
[ 0.000000] Xen: [mem 0x000000007d51b000-0x000000007d53efff] usable
[ 0.000000] Xen: [mem 0x000000007d53f000-0x000000007d569fff] reserved
[ 0.000000] Xen: [mem 0x000000007d56a000-0x000000007d703fff] usable
[ 0.000000] Xen: [mem 0x000000007d704000-0x000000007d7b3fff] reserved
[ 0.000000] Xen: [mem 0x000000007d7b4000-0x000000007f5eefff] usable
[ 0.000000] Xen: [mem 0x000000007f5ef000-0x000000007f6defff] reserved
[ 0.000000] Xen: [mem 0x000000007f6df000-0x000000007f7defff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000007f7df000-0x000000007f7fefff] ACPI data
[ 0.000000] Xen: [mem 0x000000007f7ff000-0x000000007f7fffff] usable
[ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] Xen: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: IBM System x3650 M3 -[7945AC1]-/00D4062, BIOS
-[D6E157AUS-1.15]- 06/13/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x02334fff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7f7fffff]
[ 0.000000] [mem 0x00000000-0x7f7fffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7f7fffff @ [mem
0x01831000-0x01c2ffff]
[ 0.000000] xen: setting RW the range 1c14000 - 1c30000
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x17fffffff @ [mem
0x7e9e8000-0x7f5eefff]
[ 0.000000] xen: setting RW the range 7edea000 - 7f5ef000
[ 0.000000] RAMDISK: [mem 0x01c30000-0x02334fff]
[ 0.000000] ACPI BIOS Bug: Error: A valid RSDP was not found
(20120711/tbxfroot-219)
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x175102000-0x175105fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0006bfff]
[ 0.000000] node 0: [mem 0x0006d000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7acb6fff]
[ 0.000000] node 0: [mem 0x7ccb8000-0x7d4effff]
[ 0.000000] node 0: [mem 0x7d51b000-0x7d53efff]
[ 0.000000] node 0: [mem 0x7d56a000-0x7d703fff]
[ 0.000000] node 0: [mem 0x7d7b4000-0x7f5eefff]
[ 0.000000] node 0: [mem 0x7f7ff000-0x7f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1037431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 494881 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81
http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000006c000 -
000000000006d000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007acb7000 -
000000007ccb8000
[ 0.000000] PM: Registered nosave memory: 000000007d4f0000 -
000000007d51b000
[ 0.000000] PM: Registered nosave memory: 000000007d53f000 -
000000007d56a000
[ 0.000000] PM: Registered nosave memory: 000000007d704000 -
000000007d7b4000
[ 0.000000] PM: Registered nosave memory: 000000007f5ef000 -
000000007f6df000
[ 0.000000] PM: Registered nosave memory: 000000007f6df000 -
000000007f7df000
[ 0.000000] PM: Registered nosave memory: 000000007f7df000 -
000000007f7ff000
[ 0.000000] PM: Registered nosave memory: 000000007f800000 -
0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 -
0000000090000000
[ 0.000000] PM: Registered nosave memory: 0000000090000000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 -
0000000100000000
[ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2.0 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880174e00000 s83840 r8192
d22656 u2097152
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 1.096975] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1015921
[ 1.096977] Policy zone: Normal
[ 1.096979] Kernel command line: placeholder
root=/dev/mapper/xen-fw_root ro
[ 1.097016] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.097021] __ex_table already sorted, skipping sort
[ 1.121932] software IO TLB [mem 0x16c800000-0x1707fffff] (64MB) mapped
at [ffff88016c800000-ffff8801707fffff]
[ 1.138656] Memory: 3815116k/6291456k available (3573k kernel code,
2141732k absent, 334608k reserved, 3147k data, 592k init)
[ 1.138717] Hierarchical RCU implementation.
[ 1.138718] RCU dyntick-idle grace-period acceleration is enabled.
[ 1.138719] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 1.138728] NR_IRQS:33024 nr_irqs:256 16
[ 1.147171] Console: colour VGA+ 80x25
[ 1.154296] console [tty0] enabled
[ 1.159002] allocated 16777216 bytes of page_cgroup
[ 1.159079] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 1.159208] Xen: using vcpuop timer interface
[ 1.159214] installing Xen timer for CPU 0
[ 1.159303] tsc: Detected 2400.126 MHz processor
[ 1.159375] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4800.25 BogoMIPS (lpj=9600504)
[ 1.159517] pid_max: default: 32768 minimum: 301
[ 1.159607] Security Framework initialized
[ 1.159680] AppArmor: AppArmor disabled by boot time parameter
[ 1.160298] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.161752] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 1.162415] Mount-cache hash table entries: 256
[ 1.162658] Initializing cgroup subsys cpuacct
[ 1.162729] Initializing cgroup subsys memory
[ 1.162806] Initializing cgroup subsys devices
[ 1.162876] Initializing cgroup subsys freezer
[ 1.162945] Initializing cgroup subsys net_cls
[ 1.163014] Initializing cgroup subsys blkio
[ 1.163082] Initializing cgroup subsys perf_event
[ 1.163204] CPU: Physical Processor ID: 0
[ 1.163277] CPU: Processor Core ID: 0
[ 1.163346] mce: CPU supports 2 MCE banks
[ 1.163452] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 1.163452] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 1.163452] tlb_flushall_shift is 0x6
[ 1.163602] SMP alternatives: switching to UP code
[ 1.171342] Freeing SMP alternatives: 8k freed
[ 1.171471] Performance Events: unsupported p6 CPU model 44 no PMU
driver, software events only.
[ 1.171785] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 1.171876] Brought up 1 CPUs
[ 1.172058] devtmpfs: initialized
[ 1.174970] PM: Registering ACPI NVS region [mem 0x0006c000-0x0006cfff]
(4096 bytes)
[ 1.175062] PM: Registering ACPI NVS region [mem 0x0009f000-0x0009ffff]
(4096 bytes)
[ 1.175153] PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f7defff]
(1048576 bytes)
[ 1.175314] Grant tables using version 2 layout.
[ 1.175394] Grant table initialized
[ 1.175514] dummy:
[ 1.175625] NET: Registered protocol family 16
[ 1.175969] PCI: Using configuration type 1 for base access
[ 1.176599] bio: create slab <bio-0> at 0
[ 1.176719] ACPI: Interpreter disabled.
[ 1.176796] xen/balloon: Initialising balloon driver.
[ 1.177620] xen-balloon: Initialising balloon driver.
[ 1.177761] vgaarb: loaded
[ 1.177860] PCI: Probing PCI hardware
[ 1.177929] PCI: root bus 00: using default resources
[ 1.177930] PCI: Probing PCI hardware (bus 00)
[ 1.177954] PCI host bridge to bus 0000:00
[ 1.178025] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.178098] pci_bus 0000:00: root bus resource [mem
0x00000000-0xffffffffff]
[ 1.178173] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 1.178266] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under
domain [bus 00-ff]
[ 1.178287] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[ 1.178389] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.178425] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 1.178532] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.178571] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 1.178678] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.178716] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 1.178824] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.178865] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
[ 1.178973] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.179013] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 1.179121] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.179161] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 1.179269] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.179309] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[ 1.179434] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[ 1.179543] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
[ 1.179668] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
[ 1.179795] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 1.179919] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 1.180053] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 1.180172] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 1.180273] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
[ 1.180387] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
[ 1.180408] pci 0000:00:16.0: reg 10: [mem 0x97a00000-0x97a03fff 64bit]
[ 1.180540] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
[ 1.180561] pci 0000:00:16.1: reg 10: [mem 0x97a04000-0x97a07fff 64bit]
[ 1.180693] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
[ 1.180713] pci 0000:00:16.2: reg 10: [mem 0x97a08000-0x97a0bfff 64bit]
[ 1.180845] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
[ 1.180866] pci 0000:00:16.3: reg 10: [mem 0x97a0c000-0x97a0ffff 64bit]
[ 1.180997] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
[ 1.181018] pci 0000:00:16.4: reg 10: [mem 0x97a10000-0x97a13fff 64bit]
[ 1.181150] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
[ 1.181170] pci 0000:00:16.5: reg 10: [mem 0x97a14000-0x97a17fff 64bit]
[ 1.181302] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
[ 1.181323] pci 0000:00:16.6: reg 10: [mem 0x97a18000-0x97a1bfff 64bit]
[ 1.181455] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
[ 1.181475] pci 0000:00:16.7: reg 10: [mem 0x97a1c000-0x97a1ffff 64bit]
[ 1.181610] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 1.181681] pci 0000:00:1a.0: reg 20: [io 0x20a0-0x20bf]
[ 1.181766] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 1.181837] pci 0000:00:1a.1: reg 20: [io 0x2080-0x209f]
[ 1.181937] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 1.181970] pci 0000:00:1a.7: reg 10: [mem 0x97a21000-0x97a213ff]
[ 1.182116] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.182153] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 1.182274] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.182316] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 1.182435] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.182478] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 1.182549] pci 0000:00:1d.0: reg 20: [io 0x2060-0x207f]
[ 1.182634] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 1.182705] pci 0000:00:1d.1: reg 20: [io 0x2040-0x205f]
[ 1.182790] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 1.182860] pci 0000:00:1d.2: reg 20: [io 0x2020-0x203f]
[ 1.182960] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 1.182993] pci 0000:00:1d.7: reg 10: [mem 0x97a20000-0x97a203ff]
[ 1.183138] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.183173] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 1.183279] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[ 1.183458] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
[ 1.183484] pci 0000:00:1f.2: reg 10: [io 0x2118-0x211f]
[ 1.183497] pci 0000:00:1f.2: reg 14: [io 0x212c-0x212f]
[ 1.183510] pci 0000:00:1f.2: reg 18: [io 0x2110-0x2117]
[ 1.183522] pci 0000:00:1f.2: reg 1c: [io 0x2128-0x212b]
[ 1.183535] pci 0000:00:1f.2: reg 20: [io 0x20f0-0x20ff]
[ 1.183548] pci 0000:00:1f.2: reg 24: [io 0x20e0-0x20ef]
[ 1.183629] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 1.183653] pci 0000:00:1f.3: reg 10: [mem 0x97a22000-0x97a220ff 64bit]
[ 1.183689] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
[ 1.183746] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 1.183772] pci 0000:00:1f.5: reg 10: [io 0x2108-0x210f]
[ 1.183784] pci 0000:00:1f.5: reg 14: [io 0x2124-0x2127]
[ 1.183797] pci 0000:00:1f.5: reg 18: [io 0x2100-0x2107]
[ 1.183816] pci 0000:00:1f.5: reg 1c: [io 0x2120-0x2123]
[ 1.183829] pci 0000:00:1f.5: reg 20: [io 0x20d0-0x20df]
[ 1.183841] pci 0000:00:1f.5: reg 24: [io 0x20c0-0x20cf]
[ 1.183985] pci_bus 0000:0b: busn_res: [bus 0b-0f] is inserted under
[bus 00-ff]
[ 1.184016] pci 0000:0b:00.0: [14e4:1639] type 00 class 0x020000
[ 1.184040] pci 0000:0b:00.0: reg 10: [mem 0x92000000-0x93ffffff 64bit]
[ 1.184181] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 1.184224] pci 0000:0b:00.1: [14e4:1639] type 00 class 0x020000
[ 1.184248] pci 0000:0b:00.1: reg 10: [mem 0x94000000-0x95ffffff 64bit]
[ 1.184390] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
[ 1.191939] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
[ 1.192017] pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]
[ 1.192089] pci_bus 0000:10: busn_res: [bus 10-14] is inserted under
[bus 00-ff]
[ 1.192093] pci 0000:00:02.0: PCI bridge to [bus 10-14]
[ 1.192240] pci_bus 0000:15: busn_res: [bus 15-19] is inserted under
[bus 00-ff]
[ 1.192244] pci 0000:00:03.0: PCI bridge to [bus 15-19]
[ 1.192389] pci_bus 0000:1a: busn_res: [bus 1a-1e] is inserted under
[bus 00-ff]
[ 1.192392] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
[ 1.192539] pci_bus 0000:1f: busn_res: [bus 1f-23] is inserted under
[bus 00-ff]
[ 1.192542] pci 0000:00:07.0: PCI bridge to [bus 1f-23]
[ 1.192688] pci_bus 0000:24: busn_res: [bus 24-28] is inserted under
[bus 00-ff]
[ 1.192691] pci 0000:00:09.0: PCI bridge to [bus 24-28]
[ 1.192838] pci_bus 0000:01: busn_res: [bus 01-05] is inserted under
[bus 00-ff]
[ 1.192863] pci 0000:01:00.0: [1000:0073] type 00 class 0x010400
[ 1.192884] pci 0000:01:00.0: reg 10: [io 0x1000-0x10ff]
[ 1.192908] pci 0000:01:00.0: reg 14: [mem 0x97940000-0x97943fff 64bit]
[ 1.192932] pci 0000:01:00.0: reg 1c: [mem 0x97900000-0x9793ffff 64bit]
[ 1.192962] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.193060] pci 0000:01:00.0: supports D1 D2
[ 1.200042] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.200117] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.200123] pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]
[ 1.200196] pci_bus 0000:06: busn_res: [bus 06-0a] is inserted under
[bus 00-ff]
[ 1.200228] pci 0000:06:00.0: [101b:0452] type 01 class 0x060400
[ 1.200394] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.208144] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 1.208223] pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]
[ 1.208231] pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff
64bit pref]
[ 1.208330] pci_bus 0000:07: busn_res: [bus 07] is inserted under [bus
06-0a]
[ 1.208353] pci 0000:07:00.0: [102b:0530] type 00 class 0x030000
[ 1.208388] pci 0000:07:00.0: reg 10: [mem 0x96000000-0x96ffffff pref]
[ 1.208407] pci 0000:07:00.0: reg 14: [mem 0x97800000-0x97803fff]
[ 1.208427] pci 0000:07:00.0: reg 18: [mem 0x97000000-0x977fffff]
[ 1.208633] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 1.208713] pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]
[ 1.208720] pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff
pref]
[ 1.208768] pci_bus 0000:29: busn_res: [bus 29-2d] is inserted under
[bus 00-ff]
[ 1.208829] pci 0000:00:1e.0: PCI bridge to [bus 29-2d] (subtractive
decode)
[ 1.208917] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 1.208919] pci 0000:00:1e.0: bridge window [mem
0x00000000-0xffffffffff] (subtractive decode)
[ 1.208978] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 2d
[ 1.210287] vgaarb: device added:
PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.210898] PCI: pci_cache_line_size set to 64 bytes
[ 1.211078] e820: reserve RAM buffer [mem 0x0006c000-0x0006ffff]
[ 1.211080] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 1.211081] e820: reserve RAM buffer [mem 0x7acb7000-0x7bffffff]
[ 1.211082] e820: reserve RAM buffer [mem 0x7d4f0000-0x7fffffff]
[ 1.211086] e820: reserve RAM buffer [mem 0x7d53f000-0x7fffffff]
[ 1.211088] e820: reserve RAM buffer [mem 0x7d704000-0x7fffffff]
[ 1.211091] e820: reserve RAM buffer [mem 0x7f5ef000-0x7fffffff]
[ 1.211093] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[ 1.211210] Switching to clocksource xen
[ 1.212720] pnp: PnP ACPI: disabled
[ 1.214391] pci 0000:01:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 1.214569] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff
pref] to [bus 01-05] add_size 200000
[ 1.214613] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref]
get_res_add_size add_size 200000
[ 1.214617] pci 0000:00:1c.0: BAR 15: assigned [mem
0x90000000-0x902fffff pref]
[ 1.214708] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
[ 1.214783] pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]
[ 1.214865] pci 0000:00:02.0: PCI bridge to [bus 10-14]
[ 1.214948] pci 0000:00:03.0: PCI bridge to [bus 15-19]
[ 1.215032] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
[ 1.215114] pci 0000:00:07.0: PCI bridge to [bus 1f-23]
[ 1.215198] pci 0000:00:09.0: PCI bridge to [bus 24-28]
[ 1.215282] pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff
pref]
[ 1.215383] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.215456] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.215532] pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]
[ 1.215609] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x902fffff
pref]
[ 1.215705] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 1.215782] pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]
[ 1.215860] pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff
pref]
[ 1.223235] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 1.223310] pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]
[ 1.223391] pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff
64bit pref]
[ 1.223489] pci 0000:00:1e.0: PCI bridge to [bus 29-2d]
[ 1.223580] pci 0000:00:01.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.223680] pci 0000:00:02.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.223780] pci 0000:00:03.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.223880] pci 0000:00:05.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.223981] pci 0000:00:07.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.224081] pci 0000:00:09.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.224183] pci 0000:00:1c.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.224283] pci 0000:00:1c.4: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.224385] pci 0000:06:00.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.224487] pci 0000:00:1e.0: setting latency timer to 64
[ 1.224492] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.224494] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[ 1.224496] pci_bus 0000:0b: resource 1 [mem 0x92000000-0x95ffffff]
[ 1.224498] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.224500] pci_bus 0000:01: resource 1 [mem 0x97900000-0x979fffff]
[ 1.224502] pci_bus 0000:01: resource 2 [mem 0x90000000-0x902fffff pref]
[ 1.224504] pci_bus 0000:06: resource 1 [mem 0x97000000-0x978fffff]
[ 1.224507] pci_bus 0000:06: resource 2 [mem 0x96000000-0x96ffffff 64bit
pref]
[ 1.224510] pci_bus 0000:07: resource 1 [mem 0x97000000-0x978fffff]
[ 1.224512] pci_bus 0000:07: resource 2 [mem 0x96000000-0x96ffffff pref]
[ 1.224514] pci_bus 0000:29: resource 4 [io 0x0000-0xffff]
[ 1.224516] pci_bus 0000:29: resource 5 [mem 0x00000000-0xffffffffff]
[ 1.224538] NET: Registered protocol family 2
[ 1.225637] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.228185] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.228521] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.228613] TCP: reno registered
[ 1.228689] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.228785] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.228922] NET: Registered protocol family 1
[ 1.229073] pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.229201] pci 0000:00:1a.1: can't find IRQ for PCI INT B; please try
using pci=biosirq
[ 1.229325] pci 0000:00:1a.7: can't find IRQ for PCI INT C; please try
using pci=biosirq
[ 1.229466] pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.229588] pci 0000:00:1d.1: can't find IRQ for PCI INT B; please try
using pci=biosirq
[ 1.229708] pci 0000:00:1d.2: can't find IRQ for PCI INT C; please try
using pci=biosirq
[ 1.229836] pci 0000:00:1d.7: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.229986] pci 0000:07:00.0: Boot video device
[ 1.229991] PCI: CLS 64 bytes, default 64
[ 1.230040] Unpacking initramfs...
[ 1.236939] Freeing initrd memory: 7188k freed
[ 1.238401] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 1.238695] audit: initializing netlink socket (disabled)
[ 1.238779] type=2000 audit(1349925915.231:1): initialized
[ 1.253042] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.253247] VFS: Disk quotas dquot_6.5.2
[ 1.253330] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.253465] msgmni has been set to 7465
[ 1.253646] alg: No test for stdrng (krng)
[ 1.253730] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 1.253820] io scheduler noop registered
[ 1.253888] io scheduler deadline registered
[ 1.253960] io scheduler cfq registered (default)
[ 1.254124] pcieport 0000:00:01.0: device [8086:3408] has invalid IRQ;
check vendor BIOS
[ 1.254277] pcieport 0000:00:02.0: device [8086:3409] has invalid IRQ;
check vendor BIOS
[ 1.254425] pcieport 0000:00:03.0: device [8086:340a] has invalid IRQ;
check vendor BIOS
[ 1.254573] pcieport 0000:00:05.0: device [8086:340c] has invalid IRQ;
check vendor BIOS
[ 1.254723] pcieport 0000:00:07.0: device [8086:340e] has invalid IRQ;
check vendor BIOS
[ 1.254870] pcieport 0000:00:09.0: device [8086:3410] has invalid IRQ;
check vendor BIOS
[ 1.255019] pcieport 0000:00:1c.0: device [8086:3a40] has invalid IRQ;
check vendor BIOS
[ 1.255170] pcieport 0000:00:1c.4: device [8086:3a48] has invalid IRQ;
check vendor BIOS
[ 1.255389] ioapic: probe of 0000:00:15.0 failed with error -22
[ 1.255467] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.255554] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.255627] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.255752] intel_idle: does not run on family 6 model 44
[ 1.255833] Event-channel device installed.
[ 1.255989] xen-pciback: backend is vpci
[ 1.256298] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.277599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.298917] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.299221] Linux agpgart interface v0.103
[ 1.299387] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.551430] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.551580] mousedev: PS/2 mouse device common for all mice
[ 1.551800] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.551897] rtc0: alarms up to one day, 114 bytes nvram
[ 1.551972] EFI Variables Facility v0.08 2004-May-17
[ 1.552053] drop_monitor: Initializing network drop monitor service
[ 1.552197] TCP: cubic registered
[ 1.552276] NET: Registered protocol family 10
[ 1.552496] mip6: Mobile IPv6
[ 1.552564] NET: Registered protocol family 17
[ 1.552641] Key type dns_resolver registered
[ 1.552859] PM: Hibernation image not present or could not be loaded.
[ 1.552868] registered taskstats version 1
[ 1.553635] rtc_cmos rtc_cmos: setting system clock to 2012-10-11
03:25:15 UTC (1349925915)
[ 1.553954] Freeing unused kernel memory: 592k freed
[ 1.554130] Write protecting the kernel read-only data: 6144k
[ 1.555798] Freeing unused kernel memory: 512k freed
[ 1.556107] Freeing unused kernel memory: 620k freed
[ 1.583588] udevd[50]: starting version 175
[ 1.657119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.663281] SCSI subsystem initialized
[ 1.681024] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
[ 1.681111] megasas: 0x1000:0x0073:0x1014:0x03b1: bus 1:slot 0:func 0
[ 1.681241] megaraid_sas 0000:01:00.0: can't find IRQ for PCI INT A;
please try using pci=biosirq
[ 1.687892] megasas: FW now in Ready state
[ 1.735350] megasas_init_mfi: fw_support_ieee=67108864
[ 1.735407] megasas: INIT adapter done
[ 1.807365] scsi0 : LSI SAS based MegaRAID driver
[ 1.808799] scsi 0:0:8:0: Direct-Access IBM-ESXS ST9146803SS
B53C PQ: 0 ANSI: 5
[ 1.811249] scsi 0:0:9:0: Direct-Access ATA ST9500620NS
BE24 PQ: 0 ANSI: 5
[ 1.812739] scsi 0:0:10:0: Direct-Access ATA ST9500620NS
BE24 PQ: 0 ANSI: 5
[ 1.824208] scsi 0:2:0:0: Direct-Access IBM ServeRAID M1015
2.12 PQ: 0 ANSI: 5
[ 1.839755] sd 0:2:0:0: [sdb] 1949216768 512-byte logical blocks: (997
GB/929 GiB)
[ 1.840060] sd 0:2:0:0: [sdb] Write Protect is off
[ 1.840141] sd 0:2:0:0: [sdb] Mode Sense: 1f 00 10 08
[ 1.840153] sd 0:0:8:0: [sda] 286748000 512-byte logical blocks: (146
GB/136 GiB)
[ 1.840302] sd 0:2:0:0: [sdb] Write cache: disabled, read cache:
disabled, supports DPO and FUA
[ 1.842564] sd 0:0:8:0: [sda] Write Protect is off
[ 1.842637] sd 0:0:8:0: [sda] Mode Sense: c3 00 10 08
[ 1.843418] sdb: sdb1
[ 1.843898] sd 0:0:8:0: [sda] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 1.844117] sd 0:2:0:0: [sdb] Attached SCSI disk
[ 1.866028] sda: sda1 sda2 sda3 sda4
[ 1.870498] sd 0:0:8:0: [sda] Attached SCSI disk
[ 2.053157] device-mapper: uevent: version 1.0.3
[ 2.053610] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised:
dm-devel@redhat.com
[ 2.214131] EXT4-fs (dm-0): mounted filesystem with ordered data mode.
Opts: (null)
[ 3.162111] udevd[298]: starting version 175
[ 3.419449] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v2.2.3 (June 27, 2012)
[ 3.419565] bnx2 0000:0b:00.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 3.420241] bnx2 0000:0b:00.0: eth0: Broadcom NetXtreme II BCM5709
1000Base-T (C0) PCI Express found at mem 92000000, IRQ 0, node addr
34:40:b5:ab:e5:b4
[ 3.421062] bnx2 0000:0b:00.1: can't find IRQ for PCI INT B; please try
using pci=biosirq
[ 3.421705] bnx2 0000:0b:00.1: eth1: Broadcom NetXtreme II BCM5709
1000Base-T (C0) PCI Express found at mem 94000000, IRQ 0, node addr
34:40:b5:ab:e5:b6
[ 3.428805] dca service started, version 1.12.1
[ 3.467169] EDAC MC: Ver: 3.0.0
[ 3.473824] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 3.473918] ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.473996] ioatdma 0000:00:16.0: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.474116] ioatdma 0000:00:16.0: channel error register unreachable
[ 3.474191] ioatdma 0000:00:16.0: channel enumeration error
[ 3.505302] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x15
[ 3.505995] ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed
[ 3.506096] ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
[ 3.506173] ioatdma 0000:00:16.1: can't find IRQ for PCI INT B; please
try using pci=biosirq
[ 3.506296] ioatdma 0000:00:16.1: channel error register unreachable
[ 3.506369] ioatdma 0000:00:16.1: channel enumeration error
[ 3.506441] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed
[ 3.506532] ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
[ 3.506608] ioatdma 0000:00:16.2: can't find IRQ for PCI INT C; please
try using pci=biosirq
[ 3.506722] ioatdma 0000:00:16.2: channel error register unreachable
[ 3.506795] ioatdma 0000:00:16.2: channel enumeration error
[ 3.506867] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed
[ 3.506957] ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
[ 3.507034] ioatdma 0000:00:16.3: can't find IRQ for PCI INT D; please
try using pci=biosirq
[ 3.507147] ioatdma 0000:00:16.3: channel error register unreachable
[ 3.507222] ioatdma 0000:00:16.3: channel enumeration error
[ 3.507294] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed
[ 3.507398] ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
[ 3.507476] ioatdma 0000:00:16.4: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.507590] ioatdma 0000:00:16.4: channel error register unreachable
[ 3.507663] ioatdma 0000:00:16.4: channel enumeration error
[ 3.507735] ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed
[ 3.507826] ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
[ 3.507903] ioatdma 0000:00:16.5: can't find IRQ for PCI INT B; please
try using pci=biosirq
[ 3.508016] ioatdma 0000:00:16.5: channel error register unreachable
[ 3.508090] ioatdma 0000:00:16.5: channel enumeration error
[ 3.508162] ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed
[ 3.508255] ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
[ 3.508337] ioatdma 0000:00:16.6: can't find IRQ for PCI INT C; please
try using pci=biosirq
[ 3.508454] ioatdma 0000:00:16.6: channel error register unreachable
[ 3.508529] ioatdma 0000:00:16.6: channel enumeration error
[ 3.508601] ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed
[ 3.508692] ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
[ 3.508769] ioatdma 0000:00:16.7: can't find IRQ for PCI INT D; please
try using pci=biosirq
[ 3.508885] ioatdma 0000:00:16.7: channel error register unreachable
[ 3.508958] ioatdma 0000:00:16.7: channel enumeration error
[ 3.509030] ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed
[ 3.571248] usbcore: registered new interface driver usbfs
[ 3.571330] usbcore: registered new interface driver hub
[ 3.585483] ACPI Exception: AE_BAD_PARAMETER, Thread 1786484928 could
not acquire Mutex [0x1] (20120711/utmutex-276)
[ 3.585675] ACPI Exception: AE_BAD_PARAMETER, Thread 1786484928 could
not acquire Mutex [0x1] (20120711/utmutex-276)
[ 3.590919] usbcore: registered new device driver usb
[ 3.603433] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 3.604762] libata version 3.00 loaded.
[ 3.607430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.607535] ehci_hcd 0000:00:1a.7: can't find IRQ for PCI INT C; please
try using pci=biosirq
[ 3.607629] ehci_hcd 0000:00:1a.7: Found HC with no IRQ. Check BIOS/PCI
0000:00:1a.7 setup!
[ 3.607723] ehci_hcd 0000:00:1a.7: init 0000:00:1a.7 fail, -19
[ 3.607808] ehci_hcd 0000:00:1d.7: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.607900] ehci_hcd 0000:00:1d.7: Found HC with no IRQ. Check BIOS/PCI
0000:00:1d.7 setup!
[ 3.607994] ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -19
[ 3.623701] i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
[ 3.623781] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B;
please try using pci=biosirq
[ 3.623874] ACPI Exception: AE_BAD_PARAMETER, Thread 1775910976 could
not acquire Mutex [0x1] (20120711/utmutex-276)
[ 3.624093] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 3.676083] ata_piix 0000:00:1f.2: version 2.13
[ 3.676095] ata_piix 0000:00:1f.2: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.676193] ata_piix 0000:00:1f.2: MAP [
[ 3.676260] P0 P2 P1 P3 ]
[ 3.676539] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.677344] scsi1 : ata_piix
[ 3.677732] scsi2 : ata_piix
[ 3.677862] ata1: SATA max UDMA/133 cmd 0x2118 ctl 0x212c bmdma 0x20f0
[ 3.677954] ata2: SATA max UDMA/133 cmd 0x2110 ctl 0x2128 bmdma 0x20f8
[ 3.678154] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 3.678606] ata_piix 0000:00:1f.5: can't find IRQ for PCI INT C; please
try using pci=biosirq
[ 3.678703] ata_piix 0000:00:1f.5: MAP [
[ 3.678771] P0 -- P1 -- ]
[ 3.679046] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.679562] scsi3 : ata_piix
[ 3.680057] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.682601] scsi4 : ata_piix
[ 3.682814] ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2124 bmdma 0x20d0
[ 3.682893] ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2120 bmdma 0x20d8
[ 3.683028] uhci_hcd 0000:00:1a.0: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.683123] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI
0000:00:1a.0 setup!
[ 3.683217] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 3.683300] uhci_hcd 0000:00:1a.1: can't find IRQ for PCI INT B; please
try using pci=biosirq
[ 3.683408] uhci_hcd 0000:00:1a.1: Found HC with no IRQ. Check BIOS/PCI
0000:00:1a.1 setup!
[ 3.683504] uhci_hcd 0000:00:1a.1: init 0000:00:1a.1 fail, -19
[ 3.683588] uhci_hcd 0000:00:1d.0: can't find IRQ for PCI INT A; please
try using pci=biosirq
[ 3.683682] uhci_hcd 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI
0000:00:1d.0 setup!
[ 3.683802] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -19
[ 3.683933] uhci_hcd 0000:00:1d.1: can't find IRQ for PCI INT B; please
try using pci=biosirq
[ 3.684026] uhci_hcd 0000:00:1d.1: Found HC with no IRQ. Check BIOS/PCI
0000:00:1d.1 setup!
[ 3.684121] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -19
[ 3.684201] uhci_hcd 0000:00:1d.2: can't find IRQ for PCI INT C; please
try using pci=biosirq
[ 3.684293] uhci_hcd 0000:00:1d.2: Found HC with no IRQ. Check BIOS/PCI
0000:00:1d.2 setup!
[ 3.684387] uhci_hcd 0000:00:1d.2: init 0000:00:1d.2 fail, -19
[ 3.751594] microcode: Microcode Update Driver: v2.00 <
tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.771183] iTCO_vendor_support: vendor-support=0
[ 4.010635] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.022013] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.342660] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 4.342751] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 4.487426] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.487519] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 4.487603] ata1.01: link offline, clearing class 3 to NONE
[ 4.495491] ata1.00: ATAPI: IBM SATA DEVICE 81Y3657, IB01, max UDMA/33
[ 4.511489] ata1.00: configured for UDMA/33
[ 9.511364] ata1.00: qc timeout (cmd 0xa0)
[ 9.511434] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 10.307422] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.307515] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 10.307600] ata1.01: link offline, clearing class 3 to NONE
[ 10.331487] ata1.00: configured for UDMA/33
[ 15.331361] ata1.00: qc timeout (cmd 0xa0)
[ 15.331431] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 15.331504] ata1.00: limiting SATA link speed to 1.5 Gbps
[ 15.331574] ata1.00: limiting speed to UDMA/33:PIO3
[ 16.127423] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.127515] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 16.127601] ata1.01: link offline, clearing class 3 to NONE
[ 16.151487] ata1.00: configured for UDMA/33
[ 21.151378] ata1.00: qc timeout (cmd 0xa0)
[ 21.151448] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 21.151518] ata1.00: disabled
[ 21.151603] ata1.00: hard resetting link
[ 21.471351] ata1.01: hard resetting link
[ 21.947430] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 21.947523] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 21.947608] ata1.01: link offline, clearing class 3 to NONE
[ 21.947611] ata1: EH complete
[ 21.963868] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 21.963965] iTCO_wdt: Found a ICH10 TCO device (Version=2,
TCOBASE=0x05e0)
[ 21.964124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.997872] Error: Driver 'pcspkr' is already registered, aborting...
[ 22.010315] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 22.995255] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 23.177611] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 23.281974] loop: module loaded
[ 23.346661] lp: driver loaded but no devices found
[ 24.043404] Adding 4194300k swap on /dev/mapper/xen-fw_swap.
Priority:-1 extents:1 across:4194300k
[ 24.347072] EXT4-fs (sda3): mounted filesystem with ordered data mode.
Opts: (null)
[ 24.386139] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 25.140294] bnx2 0000:0b:00.0: eth0: using MSIX
[ 25.140439] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.181911] Bridge firewalling registered
[ 25.186131] device eth1 entered promiscuous mode
[ 25.288312] bnx2 0000:0b:00.1: eth1: using MSIX
[ 25.288410] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 25.290413] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 26.898999] bnx2 0000:0b:00.0: eth0: NIC Copper Link is Up, 100 Mbps
full duplex
[ 26.899091]
[ 26.899222] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.981380] bnx2 0000:0b:00.1: eth1: NIC Copper Link is Up, 1000 Mbps
full duplex
[ 28.981477]
[ 28.981613] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 28.981698] xenbr0: port 1(eth1) entered forwarding state
[ 28.981771] xenbr0: port 1(eth1) entered forwarding state
[ 28.981850] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 33.512189] RPC: Registered named UNIX socket transport module.
[ 33.512281] RPC: Registered udp transport module.
[ 33.512351] RPC: Registered tcp transport module.
[ 33.512420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.533692] FS-Cache: Loaded
[ 33.547314] FS-Cache: Netfs 'nfs' registered for caching
[ 33.579870] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 34.845026] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 34.854870] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.475210] ppdev: user-space parallel port driver
[ 39.140866] colord-sane[2701]: segfault at 0 ip 00007fc826bc4884 sp
00007fff6a44fea0 error 4 in libc-2.13.so[7fc826b1f000+17d000]
[ 44.011341] xenbr0: port 1(eth1) entered forwarding state
Thanks for all,
Allan Scheid
[-- Attachment #1.2: Type: text/html, Size: 51742 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-11 4:09 Xen 4.2 with EFI on IBM x3650 ACPI Bug Allan Scheid
@ 2012-10-15 10:53 ` Jan Beulich
[not found] ` <CANchcZxqXDrsXEAnatWca+YWzoqB5b0nDWzfMk+6aj_SfPFBsw@mail.gmail.com>
0 siblings, 1 reply; 10+ messages in thread
From: Jan Beulich @ 2012-10-15 10:53 UTC (permalink / raw)
To: Allan Scheid; +Cc: xen-devel
>>> On 11.10.12 at 06:09, Allan Scheid <avs.009@gmail.com> wrote:
> Hellow all, i need help to fix this bug:
>
> ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219)
>
> Because of this first errors i get this after, and it causes don't work USB
> ports and some PCI cards on the system:
>
> can't find IRQ for PCI INT A; please try using pci=biosirq
>
> Kernel: 3.6.1-xen self compiled (work perfect without xen multiboot)
> Xen Version: 4.2
> Grub2 EFI: 1.99-23
If you really boot vie grub2, then that is your problem - you
ought to boot directly from EFI. Please check the available
documentation (http://xenbits.xen.org/docs/unstable/misc/efi.html).
Jan
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
[not found] ` <CANchcZxqXDrsXEAnatWca+YWzoqB5b0nDWzfMk+6aj_SfPFBsw@mail.gmail.com>
@ 2012-10-18 23:43 ` Allan Scheid
2012-10-19 8:10 ` Jan Beulich
0 siblings, 1 reply; 10+ messages in thread
From: Allan Scheid @ 2012-10-18 23:43 UTC (permalink / raw)
To: xen-devel, Jan Beulich
[-- Attachment #1.1: Type: text/plain, Size: 9206 bytes --]
Bad news, i am seeing the log output and after the xen.efi boot this still
appears on log:
Into messages:
Oct 18 20:27:36 lca-fw kernel: [ 0.000000] ACPI BIOS Bug: Error: A valid
RSDP was not found (20120711/tbxfroot-219)
Oct 18 20:27:36 lca-fw kernel: [ 0.000000] NUMA turned off
Oct 18 20:27:36 lca-fw kernel: [ 3.759750] pci 0000:00:01.0: can't find
IRQ for PCI INT A; please try using pci=biosirq
Oct 18 20:27:36 lca-fw kernel: [ 3.764011] pci 0000:00:1a.0: can't find
IRQ for PCI INT A; please try using pci=biosirq
This still causes don't work USB ports and some PCI cards on the system.
xl dmesg log:
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x588
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]
(XEN) ACPI: wakeup_vec[7f6eb00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) Processor #2 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
(XEN) Processor #16 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
(XEN) Processor #18 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
(XEN) Processor #20 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
(XEN) Processor #1 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
(XEN) Processor #3 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
(XEN) Processor #5 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)
(XEN) Processor #17 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)
(XEN) Processor #19 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)
(XEN) Processor #21 6:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 24 CPUs (12 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 2272 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2400.170 MHz processor.
(XEN) EFI memory map:
(XEN) 0000000000000-0000000000fff type=3 attr=000000000000000f
(XEN) 0000000001000-000000001cfff type=7 attr=000000000000000f
(XEN) 000000001d000-000000001ffff type=2 attr=000000000000000f
(XEN) 0000000020000-000000006bfff type=3 attr=000000000000000f
(XEN) 000000006c000-000000006cfff type=10 attr=000000000000000f
(XEN) 000000006d000-000000006dfff type=4 attr=000000000000000f
(XEN) 000000006e000-000000009efff type=3 attr=000000000000000f
(XEN) 000000009f000-000000009ffff type=10 attr=000000000000000f
(XEN) 0000000100000-00000007fffff type=7 attr=000000000000000f
(XEN) 0000000800000-0000000ffffff type=3 attr=000000000000000f
(XEN) 0000001000000-000007860bfff type=7 attr=000000000000000f
(XEN) 000007860c000-000007890cfff type=4 attr=000000000000000f
.
.
.
(XEN) 000007f7ff000-000007f7fffff type=4 attr=000000000000000f
(XEN) 00000ff800000-00000ffffffff type=11 attr=8000000000000001
(XEN) 0000100000000-000017fffffff type=7 attr=000000000000000f
(XEN) 0000080000000-000008fffffff type=11 attr=8000000000000001
(XEN) 00000fed1c000-00000fed1ffff type=11 attr=8000000000000000
(XEN) Unknown cachability for MFNs 0xfed1c-0xfed1f
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1239: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0
extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base 80000000 segment 0000 buses 00 - ff
(XEN) PCI: MCFG area at 80000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 128 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 12 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1c30000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000174000000->0000000178000000 (971715 pages to
be allocated)
(XEN) Init. ramdisk: 000000017fd21000->000000017ffffa26
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81c30000
(XEN) Init. ramdisk: ffffffff81c30000->ffffffff81f0ea26
(XEN) Phys-Mach map: ffffffff81f0f000->ffffffff8269a510
(XEN) Start info: ffffffff8269b000->ffffffff8269b4b4
(XEN) Page tables: ffffffff8269c000->ffffffff826b3000
(XEN) Boot stack: ffffffff826b3000->ffffffff826b4000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff816a7210
(XEN) Dom0 has maximum 12 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
to Xen)
(XEN) Freed 260kB init memory.
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:05.0
(XEN) PCI add device 0000:00:07.0
(XEN) PCI add device 0000:00:09.0
(XEN) PCI add device 0000:00:10.0
(XEN) PCI add device 0000:00:10.1
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:11.1
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.1
(XEN) PCI add device 0000:00:14.2
(XEN) PCI add device 0000:00:14.3
(XEN) PCI add device 0000:00:15.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.1
(XEN) PCI add device 0000:00:16.2
(XEN) PCI add device 0000:00:16.3
(XEN) PCI add device 0000:00:16.4
(XEN) PCI add device 0000:00:16.5
(XEN) PCI add device 0000:00:16.6
(XEN) PCI add device 0000:00:16.7
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1a.1
(XEN) PCI add device 0000:00:1a.7
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1d.1
(XEN) PCI add device 0000:00:1d.2
(XEN) PCI add device 0000:00:1d.7
(XEN) PCI add device 0000:00:1e.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:00:1f.5
(XEN) PCI add device 0000:0b:00.0
(XEN) PCI add device 0000:0b:00.1
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:07:00.0
This is my xen.cfg to boot xen.efi:
[global]
default=debian
[debian]
options=console=vga,com2 vga=gfx-1366x768x24 com2=115200,8n1 cpufreq=xen
loglvl=all noreboot=true iommu
kernel=vmlinuz-3.6.1-xen root=/dev/mapper/xen-fw_root ro #earlyprintk=xen
ramdisk=initrd.img-3.6.1-xen
[-- Attachment #1.2: Type: text/html, Size: 11554 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-18 23:43 ` Allan Scheid
@ 2012-10-19 8:10 ` Jan Beulich
2012-10-19 17:33 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 10+ messages in thread
From: Jan Beulich @ 2012-10-19 8:10 UTC (permalink / raw)
To: Allan Scheid; +Cc: Konrad Rzeszutek Wilk, xen-devel
>>> On 19.10.12 at 01:43, Allan Scheid <avs.009@gmail.com> wrote:
> Bad news, i am seeing the log output and after the xen.efi boot this still
> appears on log:
>
> Into messages:
> Oct 18 20:27:36 lca-fw kernel: [ 0.000000] ACPI BIOS Bug: Error: A valid
> RSDP was not found (20120711/tbxfroot-219)
> Oct 18 20:27:36 lca-fw kernel: [ 0.000000] NUMA turned off
> Oct 18 20:27:36 lca-fw kernel: [ 3.759750] pci 0000:00:01.0: can't find
> IRQ for PCI INT A; please try using pci=biosirq
> Oct 18 20:27:36 lca-fw kernel: [ 3.764011] pci 0000:00:1a.0: can't find
> IRQ for PCI INT A; please try using pci=biosirq
Of course - you also need the kernel to be capable of obtaining
the necessary EFI information from Xen. That's a separate patch
(an early port of the one we have to the pvops kernel was
posted on the list a few months ago, but I don't know what its
status or disposition is - Konrad?).
> This still causes don't work USB ports and some PCI cards on the system.
>
> xl dmesg log:
>
> (XEN) Using APIC driver default
The below shows that Xen is working fine now.
Jan
> (XEN) ACPI: PM-Timer IO Port: 0x588
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]
> (XEN) ACPI: wakeup_vec[7f6eb00c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> (XEN) Processor #2 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> (XEN) Processor #4 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
> (XEN) Processor #16 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
> (XEN) Processor #18 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> (XEN) Processor #20 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
> (XEN) Processor #1 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
> (XEN) Processor #3 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
> (XEN) Processor #5 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)
> (XEN) Processor #17 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)
> (XEN) Processor #19 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)
> (XEN) Processor #21 6:12 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>
> (XEN) Overriding APIC driver with bigsmp
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
> (XEN) ERST table is invalid
> (XEN) Using ACPI (MADT) for SMP configuration information
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-19 8:10 ` Jan Beulich
@ 2012-10-19 17:33 ` Konrad Rzeszutek Wilk
2012-10-22 20:02 ` Allan Scheid
2012-11-08 8:42 ` Jacek Konieczny
0 siblings, 2 replies; 10+ messages in thread
From: Konrad Rzeszutek Wilk @ 2012-10-19 17:33 UTC (permalink / raw)
To: Jan Beulich, Daniel Kiper; +Cc: Allan Scheid, xen-devel
On Fri, Oct 19, 2012 at 09:10:36AM +0100, Jan Beulich wrote:
> >>> On 19.10.12 at 01:43, Allan Scheid <avs.009@gmail.com> wrote:
> > Bad news, i am seeing the log output and after the xen.efi boot this still
> > appears on log:
> >
> > Into messages:
> > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] ACPI BIOS Bug: Error: A valid
> > RSDP was not found (20120711/tbxfroot-219)
> > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] NUMA turned off
> > Oct 18 20:27:36 lca-fw kernel: [ 3.759750] pci 0000:00:01.0: can't find
> > IRQ for PCI INT A; please try using pci=biosirq
> > Oct 18 20:27:36 lca-fw kernel: [ 3.764011] pci 0000:00:1a.0: can't find
> > IRQ for PCI INT A; please try using pci=biosirq
>
> Of course - you also need the kernel to be capable of obtaining
> the necessary EFI information from Xen. That's a separate patch
> (an early port of the one we have to the pvops kernel was
> posted on the list a few months ago, but I don't know what its
> status or disposition is - Konrad?).
Daniel is taking a stab at it. He got the hardware. But this is good
to know that there is hardware that removes the RSDT from the low memory
and only allows to get it from the EFI.
>
> > This still causes don't work USB ports and some PCI cards on the system.
> >
> > xl dmesg log:
> >
> > (XEN) Using APIC driver default
>
> The below shows that Xen is working fine now.
>
> Jan
>
> > (XEN) ACPI: PM-Timer IO Port: 0x588
> > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]
> > (XEN) ACPI: wakeup_vec[7f6eb00c], vec_size[20]
> > (XEN) ACPI: Local APIC address 0xfee00000
> > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > (XEN) Processor #0 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> > (XEN) Processor #2 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> > (XEN) Processor #4 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
> > (XEN) Processor #16 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
> > (XEN) Processor #18 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> > (XEN) Processor #20 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
> > (XEN) Processor #1 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
> > (XEN) Processor #3 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
> > (XEN) Processor #5 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)
> > (XEN) Processor #17 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)
> > (XEN) Processor #19 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)
> > (XEN) Processor #21 6:12 APIC version 21
> > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] disabled)
> > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] disabled)
> > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> >
> > (XEN) Overriding APIC driver with bigsmp
> > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> > (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > (XEN) ACPI: IRQ0 used by override.
> > (XEN) ACPI: IRQ2 used by override.
> > (XEN) ACPI: IRQ9 used by override.
> > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
> > (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
> > (XEN) ERST table is invalid
> > (XEN) Using ACPI (MADT) for SMP configuration information
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-19 17:33 ` Konrad Rzeszutek Wilk
@ 2012-10-22 20:02 ` Allan Scheid
2012-11-08 8:42 ` Jacek Konieczny
1 sibling, 0 replies; 10+ messages in thread
From: Allan Scheid @ 2012-10-22 20:02 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Daniel Kiper, Jan Beulich, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 539 bytes --]
Hello, i bring good news,
Thank's Jan and Daniel, i am using now the kernel 3.3.0 with the patches
recomended by Jan, here is the link in the xen lists:
http://lists.xen.org/archives/html/xen-devel/2012-02/msg02027.html
Now all things are working!! I just have a little bug in Xend start,
because don't find the python libary directory, but i just add export to
bashrc and work's fine.
For other things i used this wonderfull tutorial, just for record:
http://wiki.xen.org/wiki/Comprehensive_Xen_Debian_Wheezy_PCI_Passthrough_Tutorial
[-- Attachment #1.2: Type: text/html, Size: 866 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
@ 2012-10-23 10:16 Daniel Kiper
2012-11-02 2:02 ` Allan Scheid
0 siblings, 1 reply; 10+ messages in thread
From: Daniel Kiper @ 2012-10-23 10:16 UTC (permalink / raw)
To: avs.009; +Cc: xen-devel, JBeulich, konrad.wilk
Hi,
> Thank's Jan and Daniel, i am using now
I think that you meant Konrad because I did not help a lot.
[...]
Daniel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-23 10:16 Daniel Kiper
@ 2012-11-02 2:02 ` Allan Scheid
0 siblings, 0 replies; 10+ messages in thread
From: Allan Scheid @ 2012-11-02 2:02 UTC (permalink / raw)
To: Daniel Kiper; +Cc: xen-devel, JBeulich, konrad.wilk
[-- Attachment #1.1: Type: text/plain, Size: 455 bytes --]
Yes, i typed the e-mail too fast, and not read correct email from Konrad!
2012/10/23 Daniel Kiper <daniel.kiper@oracle.com>
> Hi,
>
> > Thank's Jan and Daniel, i am using now
>
> I think that you meant Konrad because I did not help a lot.
>
> [...]
>
> Daniel
*
*
2012/10/23 Daniel Kiper <daniel.kiper@oracle.com>
> Hi,
>
> > Thank's Jan and Daniel, i am using now
>
> I think that you meant Konrad because I did not help a lot.
>
> [...]
>
> Daniel
[-- Attachment #1.2: Type: text/html, Size: 1342 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-10-19 17:33 ` Konrad Rzeszutek Wilk
2012-10-22 20:02 ` Allan Scheid
@ 2012-11-08 8:42 ` Jacek Konieczny
2012-11-30 16:26 ` Konrad Rzeszutek Wilk
1 sibling, 1 reply; 10+ messages in thread
From: Jacek Konieczny @ 2012-11-08 8:42 UTC (permalink / raw)
To: xen-devel
Hello,
I am digging up the old thread just to show a workaround for the
IBM xSeries ACPI problem under EFI…
On Fri, Oct 19, 2012 at 01:33:07PM -0400, Konrad Rzeszutek Wilk wrote:
> On Fri, Oct 19, 2012 at 09:10:36AM +0100, Jan Beulich wrote:
> > >>> On 19.10.12 at 01:43, Allan Scheid <avs.009@gmail.com> wrote:
> > > Bad news, i am seeing the log output and after the xen.efi boot this still
> > > appears on log:
> > >
> > > Into messages:
> > > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] ACPI BIOS Bug: Error: A valid
> > > RSDP was not found (20120711/tbxfroot-219)
> > > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] NUMA turned off
> > > Oct 18 20:27:36 lca-fw kernel: [ 3.759750] pci 0000:00:01.0: can't find
> > > IRQ for PCI INT A; please try using pci=biosirq
> > > Oct 18 20:27:36 lca-fw kernel: [ 3.764011] pci 0000:00:1a.0: can't find
> > > IRQ for PCI INT A; please try using pci=biosirq
IRQs are not the only problem. Only a single CPU would be detected
without ACPI.
> > Of course - you also need the kernel to be capable of obtaining
> > the necessary EFI information from Xen. That's a separate patch
> > (an early port of the one we have to the pvops kernel was
> > posted on the list a few months ago, but I don't know what its
> > status or disposition is - Konrad?).
Yeah… it will be great to see this patch set updated and included
upstream.
>
> Daniel is taking a stab at it. He got the hardware. But this is good
> to know that there is hardware that removes the RSDT from the low memory
> and only allows to get it from the EFI.
The firmware rather does not copy the RSDT to the low memory before
trying to boot in the legacy BIOS mode.
And here is the workaround, which does not require kernel patching:
1. Make sure your kernel is compiled with CONFIG_KEXEC=y (kexec is not
needed for the workaround, but it enables the Linux kernel command-line
option used later)
2. Boot xen natively via EFI – use xen.efi not GRUB multiboot (GRUB
EFI chainloader will be ok too)
3. Note the RSDP address found by Xen:
# xl dmesg | grep RSDP
(XEN) ACPI: RSDP 7F7FE014, 0024 (r2 IBM )
4. Add this to the dom0 kernel command-line (in the xen.cfg file used by
xen.efi):
acpi_rsdp=0x7F7FE014
The Linux kernel will find the ACPI RSDP and will be able to initialize
IRQs and SMP properly. This still won't be a proper EFI interface, so
the 'efivars' module and 'efibootmgr' utility won't work, but this is
not as critical as ACPI.
Greets,
Jacek
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Xen 4.2 with EFI on IBM x3650 ACPI Bug
2012-11-08 8:42 ` Jacek Konieczny
@ 2012-11-30 16:26 ` Konrad Rzeszutek Wilk
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Rzeszutek Wilk @ 2012-11-30 16:26 UTC (permalink / raw)
To: xen-devel, daniel.kiper
On Thu, Nov 08, 2012 at 09:42:58AM +0100, Jacek Konieczny wrote:
> Hello,
>
> I am digging up the old thread just to show a workaround for the
> IBM xSeries ACPI problem under EFI…
Great. Thx
>
> On Fri, Oct 19, 2012 at 01:33:07PM -0400, Konrad Rzeszutek Wilk wrote:
> > On Fri, Oct 19, 2012 at 09:10:36AM +0100, Jan Beulich wrote:
> > > >>> On 19.10.12 at 01:43, Allan Scheid <avs.009@gmail.com> wrote:
> > > > Bad news, i am seeing the log output and after the xen.efi boot this still
> > > > appears on log:
> > > >
> > > > Into messages:
> > > > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] ACPI BIOS Bug: Error: A valid
> > > > RSDP was not found (20120711/tbxfroot-219)
> > > > Oct 18 20:27:36 lca-fw kernel: [ 0.000000] NUMA turned off
> > > > Oct 18 20:27:36 lca-fw kernel: [ 3.759750] pci 0000:00:01.0: can't find
> > > > IRQ for PCI INT A; please try using pci=biosirq
> > > > Oct 18 20:27:36 lca-fw kernel: [ 3.764011] pci 0000:00:1a.0: can't find
> > > > IRQ for PCI INT A; please try using pci=biosirq
>
> IRQs are not the only problem. Only a single CPU would be detected
> without ACPI.
>
> > > Of course - you also need the kernel to be capable of obtaining
> > > the necessary EFI information from Xen. That's a separate patch
> > > (an early port of the one we have to the pvops kernel was
> > > posted on the list a few months ago, but I don't know what its
> > > status or disposition is - Konrad?).
>
> Yeah… it will be great to see this patch set updated and included
> upstream.
Daniel is the one that is going to take a hard look at making this
work nicely. CC-ing him here so he knows about this work-around.
>
> >
> > Daniel is taking a stab at it. He got the hardware. But this is good
> > to know that there is hardware that removes the RSDT from the low memory
> > and only allows to get it from the EFI.
>
> The firmware rather does not copy the RSDT to the low memory before
> trying to boot in the legacy BIOS mode.
>
>
>
> And here is the workaround, which does not require kernel patching:
>
> 1. Make sure your kernel is compiled with CONFIG_KEXEC=y (kexec is not
> needed for the workaround, but it enables the Linux kernel command-line
> option used later)
>
> 2. Boot xen natively via EFI – use xen.efi not GRUB multiboot (GRUB
> EFI chainloader will be ok too)
>
> 3. Note the RSDP address found by Xen:
>
> # xl dmesg | grep RSDP
> (XEN) ACPI: RSDP 7F7FE014, 0024 (r2 IBM )
>
> 4. Add this to the dom0 kernel command-line (in the xen.cfg file used by
> xen.efi):
>
> acpi_rsdp=0x7F7FE014
>
> The Linux kernel will find the ACPI RSDP and will be able to initialize
> IRQs and SMP properly. This still won't be a proper EFI interface, so
> the 'efivars' module and 'efibootmgr' utility won't work, but this is
> not as critical as ACPI.
>
> Greets,
> Jacek
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-11-30 16:26 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-11 4:09 Xen 4.2 with EFI on IBM x3650 ACPI Bug Allan Scheid
2012-10-15 10:53 ` Jan Beulich
[not found] ` <CANchcZxqXDrsXEAnatWca+YWzoqB5b0nDWzfMk+6aj_SfPFBsw@mail.gmail.com>
2012-10-18 23:43 ` Allan Scheid
2012-10-19 8:10 ` Jan Beulich
2012-10-19 17:33 ` Konrad Rzeszutek Wilk
2012-10-22 20:02 ` Allan Scheid
2012-11-08 8:42 ` Jacek Konieczny
2012-11-30 16:26 ` Konrad Rzeszutek Wilk
-- strict thread matches above, loose matches on Subject: below --
2012-10-23 10:16 Daniel Kiper
2012-11-02 2:02 ` Allan Scheid
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).