WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() on v3.10-rc3

WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() on v3.10-rc3

[Konrad Rzeszutek Wilk]

Hello,

I had not yet done a full git bisection run but since this is new code added
in v3.10. I did not see this in v3.9. I think I saw this in v3.10-rc1 but never
got to look at it in depth.

Either way on a PV guest, if I do:

echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

I get this fat warning:

[   39.946760] Broke affinity for irq 16
[   40.071242] installing Xen timer for CPU 1
[   40.076109] cpu 1 spinlock event irq 48
[   40.081207] ------------[ cut here ]------------
[   40.085841] WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0()
[   40.095970] Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c i915 radeon sg sd_mod mperf skge e1000 sata_nv nouveau ata_generic libata fbcon tileblit font bitblit scsi_mod ttm softcursor drm_kms_helper mxm_wmi video wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd
[   40.130893] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.0-rc3upstream-00068-gdcdbe33 #1
[   40.139212] Hardware name: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 09/03/2009
[   40.147098]  ffffffff8193b448 ffff880039da5e60 ffffffff816707c8 ffff880039da5ea0
[   40.154550]  ffffffff8108ce8b ffff880039da4010 ffff88003fa8e500 ffff880039da4010
[   40.162004]  0000000000000001 ffff880039da4000 ffff880039da4010 ffff880039da5eb0
[   40.169458] Call Trace:
[   40.171977]  [<ffffffff816707c8>] dump_stack+0x19/0x1b
[   40.177175]  [<ffffffff8108ce8b>] warn_slowpath_common+0x6b/0xa0
[   40.183243]  [<ffffffff8108ced5>] warn_slowpath_null+0x15/0x20
[   40.189134]  [<ffffffff810e4745>] tick_nohz_idle_exit+0x195/0x1b0
[   40.195287]  [<ffffffff810da755>] cpu_startup_entry+0x205/0x250
[   40.201268]  [<ffffffff81661070>] cpu_bringup_and_idle+0x13/0x15
[   40.207332] ---[ end trace 915c8c486004dda1 ]---


which I presume is b/c the code does not expect to be run _after_ it has
offlined. However, under the PV code, the mechanism is that that a CPU
that has been offlined, can resume (if it is onlined). If you look at:

445 static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */      
446 {                                                                               
447         play_dead_common();                                                     
448         HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);              
449         cpu_bringup();                                                          
450 }                               

That is called right after the CPU is put to sleep and the hypercall 
VCPUOP_down blocks - until the CPU is brough back up. And which point
we end up calling cpu_bringup - which sets up the clockevets, timers, etc.

I am wondering if part of this is that the ts->inidle gets reset
b/c we end up resetting all the timers but then when xen_play_dead
exits, it ends up right back in the cpu_idle_loop() loop - and we
call tick_nohz_idle_exit().

Thoughts?

Re: WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() on v3.10-rc3

[Thomas Gleixner]

On Thu, 30 May 2013, Konrad Rzeszutek Wilk wrote:
> [   40.085841] WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0()
> 
> which I presume is b/c the code does not expect to be run _after_ it has
> offlined. However, under the PV code, the mechanism is that that a CPU
> that has been offlined, can resume (if it is onlined). If you look at:
> 
> 445 static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */      
> 446 {                                                                               
> 447         play_dead_common();                                                     
> 448         HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);              
> 449         cpu_bringup();                                                          
> 450 }                               
> 
> That is called right after the CPU is put to sleep and the hypercall 
> VCPUOP_down blocks - until the CPU is brough back up. And which point
> we end up calling cpu_bringup - which sets up the clockevets, timers, etc.
>
> I am wondering if part of this is that the ts->inidle gets reset
> b/c we end up resetting all the timers but then when xen_play_dead
> exits, it ends up right back in the cpu_idle_loop() loop - and we
> call tick_nohz_idle_exit().
> 
> Thoughts?

cpu_dead() is definitely not expected to return after the cpu has been
declared dead. I should have put a big fat warning into the generic
idle loop for this :)

The reason why you get that warning only now is commit 4b0c0f294
(tick: Cleanup NOHZ per cpu data on cpu down), which is btw. targeted
for stable as well.

We can't revert the above commit as it fixes a long standing
nastiness, so for now until I come around to make the idle loop return
on cpu down you probably need to call tick_nohz_idle_enter() before
returning from play_dead().

Thanks,

	tglx



    

Re: WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() on v3.10-rc3

[Konrad Rzeszutek Wilk]

On Thu, May 30, 2013 at 10:05:46PM +0200, Thomas Gleixner wrote:
> On Thu, 30 May 2013, Konrad Rzeszutek Wilk wrote:
> > [   40.085841] WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0()
> > 
> > which I presume is b/c the code does not expect to be run _after_ it has
> > offlined. However, under the PV code, the mechanism is that that a CPU
> > that has been offlined, can resume (if it is onlined). If you look at:
> > 
> > 445 static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */      
> > 446 {                                                                               
> > 447         play_dead_common();                                                     
> > 448         HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);              
> > 449         cpu_bringup();                                                          
> > 450 }                               
> > 
> > That is called right after the CPU is put to sleep and the hypercall 
> > VCPUOP_down blocks - until the CPU is brough back up. And which point
> > we end up calling cpu_bringup - which sets up the clockevets, timers, etc.
> >
> > I am wondering if part of this is that the ts->inidle gets reset
> > b/c we end up resetting all the timers but then when xen_play_dead
> > exits, it ends up right back in the cpu_idle_loop() loop - and we
> > call tick_nohz_idle_exit().
> > 
> > Thoughts?
> 
> cpu_dead() is definitely not expected to return after the cpu has been
> declared dead. I should have put a big fat warning into the generic
> idle loop for this :)
> 
> The reason why you get that warning only now is commit 4b0c0f294
> (tick: Cleanup NOHZ per cpu data on cpu down), which is btw. targeted
> for stable as well.

Ah, that would explain it. Thanks!
> 
> We can't revert the above commit as it fixes a long standing
> nastiness, so for now until I come around to make the idle loop return
> on cpu down you probably need to call tick_nohz_idle_enter() before
> returning from play_dead().

OK.  Could you keep me in mind when you do that cleanup and CC me? Thank you.