From: Chen Baozi <baozich@gmail.com>
To: Julien Grall <julien.grall@linaro.org>
Cc: Xen Developer List <xen-devel@lists.xen.org>
Subject: Re: Problems when creating domU on OMAP5
Date: Mon, 30 Sep 2013 16:30:06 +0800 [thread overview]
Message-ID: <20130930083006.GA18006@cbz-workstation> (raw)
In-Reply-To: <523842FD.4090206@linaro.org>
On Tue, Sep 17, 2013 at 12:54:37PM +0100, Julien Grall wrote:
> On 09/16/2013 02:42 PM, Chen Baozi wrote:
> >On Mon, Sep 16, 2013 at 09:18:28PM +0800, Chen Baozi wrote:
> >>Hi all,
> >>
> >>I tried to create a domU on OMAP5 today. But it seems there are still some
> >>problems to solve before I can successfully creat it.
> >>
> >>I first cloned Julien's arndale-domU-3.9 branch which mentioned in wiki.
> >>Then I modified gic addresses xenvm-4.2.dts to meet OMAP5432 requirement:
> >>
> >>--- a/arch/arm/boot/dts/xenvm-4.2.dts
> >>+++ b/arch/arm/boot/dts/xenvm-4.2.dts
> >>@@ -49,13 +49,13 @@
> >> reg = <0 0x80000000 0 0x08000000>;
> >> };
> >>
> >>- gic: interrupt-controller@2c001000 {
> >>+ gic: interrupt-controller@48211000 {
> >> compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> >> #interrupt-cells = <3>;
> >> #address-cells = <0>;
> >> interrupt-controller;
> >>- reg = <0 0x10481000 0 0x1000>,
> >>- <0 0x10482000 0 0x100>;
> >>+ reg = <0 0x48211000 0 0x1000>,
> >>+ <0 0x48212000 0 0x1000>;
> >> };
> >>
> >> timer {
> >>
> >>And make the kernel image as wiki said:
> >>
> >>$ cat arch/arm/boot/zImage arch/arm/boot/xenvm-4.2.dtb > image
> >>
> >>Write a config file used by xl like:
> >>
> >>kernel = "/root/domU/image"
> >>memory = "128"
> >>name = "domU"
> >>vcpus = 1
> >>disk = [ 'phy:/dev/loop0,xvda,w' ]
> >>
> >>Setup loop device:
> >>
> >>$ losetup /dev/loop0 /root/domU/xen-arm.img
> >>
> >>which xen-arm.img is the a bootable rootfs.
> >>
> >>Finally I execute xl to create the domU:
> >>
> >>$ sudo xl create -f config -d
> >>Parsing config from config
> >>unable to format domain config as JSON (YAJL:1)
> >>[ 80.685264] Failed to unmap pfn:9bce5 rc:-2
> >>[ 80.691741] Failed to unmap pfn:9e7da rc:-2
> >>[ 80.696310] Failed to unmap pfn:9bce5 rc:-2
> >>[ 80.702494] Failed to unmap pfn:9ba57 rc:-2
> >>[ 80.706932] Failed to unmap pfn:9bce3 rc:-2
> >>[ 80.718394] Failed to unmap pfn:9bce2 rc:-2
> >>libxl: error: libxl_device.c:894:device_backend_callback: unable to add device with path /local/domain/0/backend/vbd/1/51712
> >>libxl: error: libxl_create.c:932:domcreate_launch_dm: unable to add disk devices
> >>libxl: error: libxl_device.c:894:device_backend_callback: unable to remove device with path /local/domain/0/backend/vbd/1/51712
> >>libxl: error: libxl.c:1451:devices_destroy_cb: libxl__devices_destroy failed for 1
> >>(XEN) mm.c:1092:d0 gnttab_mark_dirty not implemented yet
> >>
> >
> >Besides, after few minutes of executing "xl create" command, there are
> >continuous kernel oops message such as:
>
> I suspect an interrupt problem. I have a patch series that should
> fix the different issues with the interrupts, but I didn't take time
> to rewrite properly :(.
>
> Can you give a try to the following branch (and your patches) on the omap5?
>
> git clone -b interrupts-v1
> git://xenbits.xen.org/people/julieng/xen-unstable.git
>
> Thanks,
Hi Julien,
I've ported the top five patches from your interrupts-v1 branch and tested
it on OMAP5. It caused stucks while create the domU. And here is the dmesg:
http://pastebin.com/QF0jAyCm
The commit ID of five patches I ported from interrupts-v1 are:
68d67c0e1e3ba86b99fdc5a19b014c3b642d1edd
e638f50cb297a6c243738ddb98ddf69dd27633ee
439a8eea145f1596d955e15ef5ef5672fc876511
34ef513d9710a9ded47263d4c4fc2896b03b051c
f906637c38e3f1431a055ccd5adc4b5ea5c9acaf
Any ideas?
Cheers,
Baozi
next prev parent reply other threads:[~2013-09-30 8:30 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-16 13:18 Problems when creating domU on OMAP5 Chen Baozi
2013-09-16 13:42 ` Chen Baozi
2013-09-17 11:54 ` Julien Grall
2013-09-18 2:08 ` Chen Baozi
2013-09-30 8:30 ` Chen Baozi [this message]
2013-10-07 12:36 ` Julien Grall
2013-11-07 6:14 ` Chen Baozi
2013-11-07 8:23 ` Ian Campbell
2013-09-17 11:47 ` Julien Grall
2013-09-18 2:06 ` Chen Baozi
2013-09-18 14:48 ` Julien Grall
2013-09-18 16:12 ` Andrii Anisov
2013-09-19 13:39 ` Chen Baozi
2013-09-24 0:39 ` Vaibhav Bedia
2013-09-25 9:12 ` Chen Baozi
2013-09-25 13:39 ` Vaibhav Bedia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130930083006.GA18006@cbz-workstation \
--to=baozich@gmail.com \
--cc=julien.grall@linaro.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).