xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu2@citrix.com>, Andrew Jones <drjones@redhat.com>,
	Keir Fraser <keir@xen.org>,
	Ian Campbell <ian.campbell@citrix.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Julien Grall <julien.grall@linaro.org>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Olaf Hering <olaf@aepfle.de>, Tim Deegan <tim@xen.org>,
	David Vrabel <david.vrabel@citrix.com>,
	Jan Beulich <jbeulich@suse.com>,
	xen-devel@lists.xenproject.org,
	Daniel De Graaf <dgdegra@tycho.nsa.gov>
Subject: Re: [PATCH v8 06/11] xen: Introduce XEN_DOMCTL_soft_reset
Date: Fri, 10 Jul 2015 12:30:55 -0400	[thread overview]
Message-ID: <20150710163055.GC24518@l.oracle.com> (raw)
In-Reply-To: <1435075913-335-7-git-send-email-vkuznets@redhat.com>

On Tue, Jun 23, 2015 at 06:11:48PM +0200, Vitaly Kuznetsov wrote:
> New domctl resets state for a domain allowing it to 'start over': register
> vcpu_info, switch to FIFO ABI for event channels. Still active grants are
> being logged to help debugging misbehaving backends.
> 
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
>  xen/common/domain.c         | 29 ++++++++++++++++++++++++++---
>  xen/common/domctl.c         |  9 +++++++++
>  xen/include/public/domctl.h |  1 +
>  xen/include/xen/sched.h     |  2 ++
>  4 files changed, 38 insertions(+), 3 deletions(-)
> 
> diff --git a/xen/common/domain.c b/xen/common/domain.c
> index 3bc52e6..ade80ff 100644
> --- a/xen/common/domain.c
> +++ b/xen/common/domain.c
> @@ -1010,6 +1010,26 @@ int domain_unpause_by_systemcontroller(struct domain *d)
>      return 0;
>  }
>  
> +int domain_soft_reset(struct domain *d)
> +{
> +    struct vcpu *v;
> +
> +    for_each_vcpu ( d, v )
> +        if ( !v->paused_for_shutdown )
> +            return -EINVAL;

I think you need to hold a lock to make sure that nobody else
during this loop messes with 'v->paused_for_shutdown' value.

That is the shutdown_lock.

> +
> +    evtchn_reset(d);
> +
> +    grant_table_warn_active_grants(d);
> +
> +    for_each_vcpu ( d, v )
> +        unmap_vcpu_info(v);
> +
> +    domain_resume(d);
> +
> +    return 0;
> +}
> +
>  int vcpu_reset(struct vcpu *v)
>  {
>      struct domain *d = v->domain;
> @@ -1121,12 +1141,12 @@ int map_vcpu_info(struct vcpu *v, unsigned long gfn, unsigned offset)
>  
>  /*
>   * Unmap the vcpu info page if the guest decided to place it somewhere
> - * else.  This is only used from arch_domain_destroy, so there's no
> - * need to do anything clever.
> + * else. This is used from arch_domain_destroy and domain_soft_reset.
>   */
>  void unmap_vcpu_info(struct vcpu *v)
>  {
>      unsigned long mfn;
> +    struct domain *d = v->domain;
>  
>      if ( v->vcpu_info_mfn == INVALID_MFN )
>          return;
> @@ -1135,7 +1155,10 @@ void unmap_vcpu_info(struct vcpu *v)
>      unmap_domain_page_global((void *)
>                               ((unsigned long)v->vcpu_info & PAGE_MASK));
>  
> -    v->vcpu_info = &dummy_vcpu_info;
> +    v->vcpu_info = ((v->vcpu_id < XEN_LEGACY_MAX_VCPUS)
> +                    ? (vcpu_info_t *)&shared_info(d, vcpu_info[v->vcpu_id])
> +                    : &dummy_vcpu_info);
> +

Could you explain that bit please? Why not use dummy_vcpu_info?

Ah, you are doing what alloc_vcpu does.
>      v->vcpu_info_mfn = INVALID_MFN;

Perhaps we should jus thave a function called 'vcpu_info_reset' that
would do this - and called in both places?

>  
>      put_page_and_type(mfn_to_page(mfn));
> diff --git a/xen/common/domctl.c b/xen/common/domctl.c
> index ce517a7..8cb6a2a 100644
> --- a/xen/common/domctl.c
> +++ b/xen/common/domctl.c
> @@ -703,6 +703,15 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
>          break;
>      }
>  
> +    case XEN_DOMCTL_soft_reset:
> +        if ( d == current->domain )
> +        {
> +            ret = -EINVAL;
> +            break;
> +        }
> +        ret = domain_soft_reset(d);
> +        break;
> +
>      case XEN_DOMCTL_destroydomain:
>          ret = domain_kill(d);
>          if ( ret == -ERESTART )
> diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
> index bc45ea5..5b4ba6b 100644
> --- a/xen/include/public/domctl.h
> +++ b/xen/include/public/domctl.h
> @@ -1114,6 +1114,7 @@ struct xen_domctl {
>  #define XEN_DOMCTL_setvnumainfo                  74
>  #define XEN_DOMCTL_psr_cmt_op                    75
>  #define XEN_DOMCTL_monitor_op                    77
> +#define XEN_DOMCTL_soft_reset                    78
>  #define XEN_DOMCTL_gdbsx_guestmemio            1000
>  #define XEN_DOMCTL_gdbsx_pausevcpu             1001
>  #define XEN_DOMCTL_gdbsx_unpausevcpu           1002
> diff --git a/xen/include/xen/sched.h b/xen/include/xen/sched.h
> index d810e1c..1120741 100644
> --- a/xen/include/xen/sched.h
> +++ b/xen/include/xen/sched.h
> @@ -609,6 +609,8 @@ void domain_shutdown(struct domain *d, u8 reason);
>  void domain_resume(struct domain *d);
>  void domain_pause_for_debugger(void);
>  
> +int domain_soft_reset(struct domain *d);
> +
>  int vcpu_start_shutdown_deferral(struct vcpu *v);
>  void vcpu_end_shutdown_deferral(struct vcpu *v);
>  
> -- 
> 2.4.2
> 

  reply	other threads:[~2015-07-10 16:31 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-23 16:11 [PATCH v8 00/11] toolstack-assisted approach to PVHVM guest kexec Vitaly Kuznetsov
2015-06-23 16:11 ` [PATCH v8 01/11] xen: introduce SHUTDOWN_soft_reset shutdown reason Vitaly Kuznetsov
2015-07-07 20:44   ` Konrad Rzeszutek Wilk
2015-07-14 16:10     ` Ian Jackson
2015-07-15  8:42       ` Vitaly Kuznetsov
2015-06-23 16:11 ` [PATCH v8 02/11] libxl: support " Vitaly Kuznetsov
2015-07-07 20:47   ` Konrad Rzeszutek Wilk
2015-07-14 16:15     ` Ian Jackson
2015-07-15  8:43       ` Vitaly Kuznetsov
2015-06-23 16:11 ` [PATCH v8 03/11] xl: introduce enum domain_restart_type Vitaly Kuznetsov
2015-07-07 20:48   ` Konrad Rzeszutek Wilk
2015-06-23 16:11 ` [PATCH v8 04/11] xen: evtchn: make evtchn_reset() ready for soft reset Vitaly Kuznetsov
2015-07-10 16:20   ` Konrad Rzeszutek Wilk
2015-06-23 16:11 ` [PATCH v8 05/11] xen: grant_table: implement grant_table_warn_active_grants() Vitaly Kuznetsov
2015-07-10 16:24   ` Konrad Rzeszutek Wilk
2015-07-13  8:45     ` Jan Beulich
2015-07-13  9:08       ` Ian Campbell
2015-07-13  9:30         ` Jan Beulich
2015-07-13  9:35           ` Vitaly Kuznetsov
2015-07-13 13:44     ` Vitaly Kuznetsov
2015-07-13 14:24       ` Konrad Rzeszutek Wilk
2015-06-23 16:11 ` [PATCH v8 06/11] xen: Introduce XEN_DOMCTL_soft_reset Vitaly Kuznetsov
2015-07-10 16:30   ` Konrad Rzeszutek Wilk [this message]
2015-06-23 16:11 ` [PATCH v8 07/11] flask: DOMCTL_soft_reset support Vitaly Kuznetsov
2015-07-13 19:43   ` Daniel De Graaf
2015-06-23 16:11 ` [PATCH v8 08/11] xen: arch-specific hooks for domain_soft_reset() Vitaly Kuznetsov
2015-07-10 16:54   ` Konrad Rzeszutek Wilk
2015-07-14 15:52     ` Vitaly Kuznetsov
2015-07-14 15:57       ` Konrad Rzeszutek Wilk
2015-07-14 16:07         ` Vitaly Kuznetsov
2015-07-15 20:19   ` Julien Grall
2015-07-16 11:36     ` Vitaly Kuznetsov
2015-07-16 11:57       ` Julien Grall
2015-06-23 16:11 ` [PATCH v8 09/11] libxc: support XEN_DOMCTL_soft_reset operation Vitaly Kuznetsov
2015-06-25 13:52   ` Wei Liu
2015-07-10 16:55   ` Konrad Rzeszutek Wilk
2015-07-14 16:17   ` Ian Jackson
2015-06-23 16:11 ` [PATCH v8 10/11] libxc: add XC_DEVICE_MODEL_SAVE_FILE Vitaly Kuznetsov
2015-06-23 16:11 ` [PATCH v8 11/11] (lib)xl: soft reset support Vitaly Kuznetsov
2015-07-10 16:59   ` Konrad Rzeszutek Wilk
2015-07-14 16:19   ` Ian Jackson
2015-07-15  8:50     ` Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150710163055.GC24518@l.oracle.com \
    --to=konrad.wilk@oracle.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=david.vrabel@citrix.com \
    --cc=dgdegra@tycho.nsa.gov \
    --cc=drjones@redhat.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=julien.grall@linaro.org \
    --cc=keir@xen.org \
    --cc=olaf@aepfle.de \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=tim@xen.org \
    --cc=vkuznets@redhat.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).