xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu2@citrix.com>, Andrew Jones <drjones@redhat.com>,
	Keir Fraser <keir@xen.org>,
	Ian Campbell <ian.campbell@citrix.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Julien Grall <julien.grall@linaro.org>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Olaf Hering <olaf@aepfle.de>, Tim Deegan <tim@xen.org>,
	David Vrabel <david.vrabel@citrix.com>,
	Jan Beulich <jbeulich@suse.com>,
	xen-devel@lists.xenproject.org,
	Daniel De Graaf <dgdegra@tycho.nsa.gov>
Subject: Re: [PATCH v10 06/11] xen: Introduce XEN_DOMCTL_soft_reset
Date: Tue, 11 Aug 2015 15:57:09 -0400	[thread overview]
Message-ID: <20150811195709.GB7765@l.oracle.com> (raw)
In-Reply-To: <1438090096-8297-7-git-send-email-vkuznets@redhat.com>

On Tue, Jul 28, 2015 at 03:28:11PM +0200, Vitaly Kuznetsov wrote:
> New domctl resets state for a domain allowing it to 'start over': register
> vcpu_info, switch to FIFO ABI for event channels. Still active grants are
> being logged to help debugging misbehaving backends.
> 
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> Acked-by: Jan Beulich <jbeulich@suse.com>
> ---
> Changes since v9:
> - Unlock shutdown_lock on !v->paused_for_shutdown check failure
>   [Konrad Rzeszutek Wilk]
> - Add Acked-by: [Jan Beulich]
> ---
>  xen/common/domain.c         | 47 +++++++++++++++++++++++++++++++++++++--------
>  xen/common/domctl.c         |  9 +++++++++
>  xen/include/public/domctl.h |  1 +
>  xen/include/xen/sched.h     |  2 ++
>  4 files changed, 51 insertions(+), 8 deletions(-)
> 
> diff --git a/xen/common/domain.c b/xen/common/domain.c
> index 1b9fcfc..4c8e6a2 100644
> --- a/xen/common/domain.c
> +++ b/xen/common/domain.c
> @@ -110,6 +110,16 @@ static void vcpu_check_shutdown(struct vcpu *v)
>      spin_unlock(&d->shutdown_lock);
>  }
>  
> +static void vcpu_info_reset(struct vcpu *v)
> +{
> +    struct domain *d = v->domain;
> +
> +    v->vcpu_info = ((v->vcpu_id < XEN_LEGACY_MAX_VCPUS)
> +                    ? (vcpu_info_t *)&shared_info(d, vcpu_info[v->vcpu_id])
> +                    : &dummy_vcpu_info);
> +    v->vcpu_info_mfn = INVALID_MFN;
> +}
> +
>  struct vcpu *alloc_vcpu(
>      struct domain *d, unsigned int vcpu_id, unsigned int cpu_id)
>  {
> @@ -145,10 +155,7 @@ struct vcpu *alloc_vcpu(
>          v->runstate.state = RUNSTATE_offline;        
>          v->runstate.state_entry_time = NOW();
>          set_bit(_VPF_down, &v->pause_flags);
> -        v->vcpu_info = ((vcpu_id < XEN_LEGACY_MAX_VCPUS)
> -                        ? (vcpu_info_t *)&shared_info(d, vcpu_info[vcpu_id])
> -                        : &dummy_vcpu_info);
> -        v->vcpu_info_mfn = INVALID_MFN;
> +        vcpu_info_reset(v);
>          init_waitqueue_vcpu(v);
>      }
>  
> @@ -1038,6 +1045,32 @@ void domain_unpause_except_self(struct domain *d)
>          domain_unpause(d);
>  }
>  
> +int domain_soft_reset(struct domain *d)
> +{
> +    struct vcpu *v;
> +    int rc;
> +
> +    spin_lock(&d->shutdown_lock);
> +    for_each_vcpu ( d, v )
> +        if ( !v->paused_for_shutdown )
> +        {
> +            spin_unlock(&d->shutdown_lock);
> +            return -EINVAL;
> +        }
> +    spin_unlock(&d->shutdown_lock);
> +
> +    rc = evtchn_reset(d);

You do ignore the 'rc' value? In which case why not just
do:

	(void)evtchn_reset(d);

Unless you want to return the 'rc' ?
> +
> +    grant_table_warn_active_grants(d);
> +
> +    for_each_vcpu ( d, v )
> +        unmap_vcpu_info(v);
> +
> +    domain_resume(d);
> +
> +    return 0;
> +}
> +
>  int vcpu_reset(struct vcpu *v)
>  {
>      struct domain *d = v->domain;
> @@ -1149,8 +1182,7 @@ int map_vcpu_info(struct vcpu *v, unsigned long gfn, unsigned offset)
>  
>  /*
>   * Unmap the vcpu info page if the guest decided to place it somewhere
> - * else.  This is only used from arch_domain_destroy, so there's no
> - * need to do anything clever.
> + * else. This is used from arch_domain_destroy and domain_soft_reset.
>   */
>  void unmap_vcpu_info(struct vcpu *v)
>  {
> @@ -1163,8 +1195,7 @@ void unmap_vcpu_info(struct vcpu *v)
>      unmap_domain_page_global((void *)
>                               ((unsigned long)v->vcpu_info & PAGE_MASK));
>  
> -    v->vcpu_info = &dummy_vcpu_info;
> -    v->vcpu_info_mfn = INVALID_MFN;
> +    vcpu_info_reset(v);
>  
>      put_page_and_type(mfn_to_page(mfn));
>  }
> diff --git a/xen/common/domctl.c b/xen/common/domctl.c
> index 7f959f3..41891b1 100644
> --- a/xen/common/domctl.c
> +++ b/xen/common/domctl.c
> @@ -704,6 +704,15 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl)
>          break;
>      }
>  
> +    case XEN_DOMCTL_soft_reset:
> +        if ( d == current->domain )
> +        {
> +            ret = -EINVAL;
> +            break;
> +        }
> +        ret = domain_soft_reset(d);
> +        break;
> +
>      case XEN_DOMCTL_destroydomain:
>          ret = domain_kill(d);
>          if ( ret == -ERESTART )
> diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
> index 675f021..794d4d5 100644
> --- a/xen/include/public/domctl.h
> +++ b/xen/include/public/domctl.h
> @@ -1139,6 +1139,7 @@ struct xen_domctl {
>  #define XEN_DOMCTL_psr_cmt_op                    75
>  #define XEN_DOMCTL_monitor_op                    77
>  #define XEN_DOMCTL_psr_cat_op                    78
> +#define XEN_DOMCTL_soft_reset                    79
>  #define XEN_DOMCTL_gdbsx_guestmemio            1000
>  #define XEN_DOMCTL_gdbsx_pausevcpu             1001
>  #define XEN_DOMCTL_gdbsx_unpausevcpu           1002
> diff --git a/xen/include/xen/sched.h b/xen/include/xen/sched.h
> index 73d3bc8..8053b5a 100644
> --- a/xen/include/xen/sched.h
> +++ b/xen/include/xen/sched.h
> @@ -610,6 +610,8 @@ void domain_shutdown(struct domain *d, u8 reason);
>  void domain_resume(struct domain *d);
>  void domain_pause_for_debugger(void);
>  
> +int domain_soft_reset(struct domain *d);
> +
>  int vcpu_start_shutdown_deferral(struct vcpu *v);
>  void vcpu_end_shutdown_deferral(struct vcpu *v);
>  
> -- 
> 2.4.3
> 

  reply	other threads:[~2015-08-11 19:57 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-28 13:28 [PATCH v10 00/11] toolstack-assisted approach to PVHVM guest kexec Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 01/11] xen: introduce SHUTDOWN_soft_reset shutdown reason Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 02/11] libxl: support " Vitaly Kuznetsov
2015-08-11 19:54   ` Konrad Rzeszutek Wilk
2015-08-31 14:04   ` Wei Liu
2015-07-28 13:28 ` [PATCH v10 03/11] xl: introduce enum domain_restart_type Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 04/11] xen: evtchn: make evtchn_reset() ready for soft reset Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 05/11] xen: grant_table: implement grant_table_warn_active_grants() Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 06/11] xen: Introduce XEN_DOMCTL_soft_reset Vitaly Kuznetsov
2015-08-11 19:57   ` Konrad Rzeszutek Wilk [this message]
2015-08-12  8:41     ` Jan Beulich
2015-08-12  9:19       ` Vitaly Kuznetsov
2015-08-12  9:43         ` Jan Beulich
2015-07-28 13:28 ` [PATCH v10 07/11] flask: DOMCTL_soft_reset support Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 08/11] xen: arch-specific hooks for domain_soft_reset() Vitaly Kuznetsov
2015-08-11 19:59   ` Konrad Rzeszutek Wilk
2015-08-17 15:38   ` Jan Beulich
2015-09-01 16:10   ` Ian Campbell
2015-07-28 13:28 ` [PATCH v10 09/11] libxc: support XEN_DOMCTL_soft_reset operation Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 10/11] libxc: add XC_DEVICE_MODEL_SAVE_FILE Vitaly Kuznetsov
2015-07-28 13:28 ` [PATCH v10 11/11] (lib)xl: soft reset support Vitaly Kuznetsov
2015-08-11 20:04   ` Konrad Rzeszutek Wilk
2015-08-31 14:14   ` Wei Liu
2015-09-01 11:52     ` Vitaly Kuznetsov
2015-09-01 17:26     ` Vitaly Kuznetsov
2015-09-01 17:30       ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150811195709.GB7765@l.oracle.com \
    --to=konrad.wilk@oracle.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=david.vrabel@citrix.com \
    --cc=dgdegra@tycho.nsa.gov \
    --cc=drjones@redhat.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=julien.grall@linaro.org \
    --cc=keir@xen.org \
    --cc=olaf@aepfle.de \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=tim@xen.org \
    --cc=vkuznets@redhat.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).