* Re: Nested Virtualisation and UEFI
2015-09-04 9:17 ` Jan Beulich
@ 2015-09-04 11:35 ` James Dingwall
2015-09-04 12:06 ` Jan Beulich
0 siblings, 1 reply; 5+ messages in thread
From: James Dingwall @ 2015-09-04 11:35 UTC (permalink / raw)
To: Jan Beulich; +Cc: James Dingwall, xen-devel
On Fri, Sep 04, 2015 at 03:17:38AM -0600, Jan Beulich wrote:
> >>> On 04.09.15 at 10:47, <james-xen@dingwall.me.uk> wrote:
> > I am trying to get a nested virtualisation environment working where it is
> > started with bios='ovmf'. When my
> > hvm configuration is bios='seabios' and I use the xen.gz everything starts
> > correctly. Using the xen.efi from
> > the same build when bios='ovmf' causesthe guest Linux kernel to block when
> > accessing the emulated disk
> > controller (scsi or ide) as below.
> >
> > Is this nested configuration expected to work?
>
> I don't think there's any expectation either way. You may well be the
> first one to every try. I wouldn't even dare to guess whether the
> issue is in the BIOS, Xen, qemu, or any combination thereof.
>
> > If so, are there other
> > things that need to change apart from
> > switching the bios configuration value? I can provide more information from
> > the guest XEN / kernel logs or the
> > guest configuration file if that would be useful.
> >
> > [ 31.848214] ata1: lost interrupt (Status 0x50)
>
> This might hint at a problem with interrupts. A full, maximally verbose
> log (hypervisor and kernel) may tell.
>
> > [ 31.855823] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> > [ 31.866516] ata1.00: failed command: READ DMA
> > [ 31.873472] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> > [ 31.873472] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > [ 31.896759] ata1.00: status: { DRDY }
> > [ 31.902526] ata1: soft resetting link
> > [ 32.076309] ata1.00: configured for MWDMA2
> > [ 32.083559] ata1.00: device reported invalid CHS sector 0
> > [ 32.094014] ata1: EH complete
>
> Whereas this might also hint at the BIOS reporting an IOMMU when
> there is none, or some other issue with setting up DMA. Again, full
> logs may provide some insight.
>
> Jan
>
I was worried about spamming the list by sending the full logs but if that is likely to have the most useful
information then here we go...
xen-4.4.3.gz is installed as bootx64.efi but that fails and so it drops to the firmware where I start a shell
and then execute xen-4.5.1.efi. I've just noticed the firmware sees the system with 16Gb RAM despite the guest
configuration being memory=20480 but changing that to 16384 did not change the behaviour. Xen also seems to
only see 1 cpu when the configuration is vcpus=4. iommu=1 is set on the command line because this is an image
from a physical server but no iommu is detected, changing to 0 has no effect. If I boot the hvm without xen
using the same kernel I can get to the ramdisk shell, the log for that boot is the second one below.
The complete xen configuration file is:
name = "nvdom0"
builder = "hvm"
vif = [
"bridge=ovswan,mac=00:16:3e:01:3d:23",
"bridge=ovslan,mac=00:16:3e:02:3d:23"
]
vcpus = 4
acpi = 1
apic = 1
pae = 1
xen_platform_pci = 0
nestedhvm = 1
#memory = 16384
memory = 20480
#memory = 24576
vga = "stdvga"
videoram = 16
disk = [
"phy:/dev/zvol/data/sda,hda,w",
"phy:/dev/zvol/data/sdb,sda,w"
]
boot = "c"
sdl = 0
vnc = 1
vnclisten = "0.0.0.0"
serial = "pty"
keymap = "en-gb"
usb = 1
usbdevice = "tablet"
on_poweroff = "destroy"
on_crash = "preserve"
on_reboot = "restart"
#bios = "seabios"
bios = "ovmf"
device_model_version = "qemu-xen"
Boot Failed. EFI Floppy
Boot Failed. EFI Floppy 1
Xen 4.4.3 (c/s Thu Aug 20 16:19:38 2015 +0200 git:27b82b0-dirty) EFI loader
No configuration file found.
Boot Succeeded - EFI Hard Drive
HVM domU
3.09 GHz
4.5.0 16384 MB RAM
Continue This selection will
Select Language <Standard English> take you to the Boot
Boot Manager Manager
Device Manager
Boot Maintenance Manager
=Move Highlight <Enter>=Select Entry
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ
▒ Boot Manager ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Device Path :
Boot Option Menu MemoryMapped(0xB,0x900
000,0x10FFFFF)/FvFile(
EFI Floppy 7C04A583-9E3E-4F1C-AD6
EFI Floppy 1 5-E05268D0B4D1)
EFI Hard Drive
EFI Internal Shell
and to change option, ENTER to select an
option, ESC to exit
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ
▒ ▒
▒ =Move Highlight <Enter>=Select Entry Esc=Exit ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
UEFI Interactive Shell v2.1
EDK II
UEFI v2.40 (EDK II, 0x00010000)
Mapping table
FS0: Alias(s):HD7a1:;BLK3:
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)/HD(1,GPT,49C19AAD-E6FF-478E-8475-259F2C5B587B,0x800,0x100000)
BLK2: Alias(s):
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)
BLK4: Alias(s):
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)/HD(2,GPT,C20D0CA8-DEBA-4516-9007-E07462A8C7B4,0x100800,0x6FF000)
BLK0: Alias(s):
PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x0)
BLK1: Alias(s):
PciRoot(0x0)/Pci(0x1,0x0)/Floppy(0x1)
Press ESC in 4 seconds to skip startup.nsh or any other key to continue.
Shell> fs0:
FS0:\> cd EFI\Xen
FS0:\EFI\Xen\> cd
FS0:\EFI\Xen\
FS0:\EFI\Xen\> xen-4.5.1.efi
Xen 4.5.1 (c/s ) EFI loader
Using configuration file 'xen.cfg'
vmlinuz: 0x00000000ecdf2000-0x00000000ed4373d0
initrd.img: 0x00000000eac52000-0x00000000ebfffe4d
__ __ _ _ ____ _
\ \/ /___ _ __ | || | | ___| / |
\ // _ \ '_ \ | || |_ |___ \ | |
/ \ __/ | | | |__ _| ___) || |
/_/\_\___|_| |_| |_|(_)____(_)_|
(XEN) Xen version 4.5.1 (@dingwall.me.uk) (x86_64-pc-linux-gnu-gcc (Gentoo 4.8.4 p1.6, pie-0.6.1) 4.8.4) debug=n
Wed Aug 26 09:42:27 BST 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: EFI
(XEN) Command line: xsave=0 iommu=1 basevideo console=vga,com1 com1=115200,8n1 dom0_max_vcpus=4
dom0_mem=max:1664m tmem tmem_dedup=on tmem_compress=on
(XEN) Video information:
(XEN) VGA is graphics mode 800x600, 32 bpp
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) EFI RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (ACPI NVS)
(XEN) 0000000000100000 - 00000000eecf5000 (usable)
(XEN) 00000000eecf5000 - 00000000eee44000 (reserved)
(XEN) 00000000eee44000 - 00000000efec4000 (usable)
(XEN) 00000000efec4000 - 00000000eff18000 (reserved)
(XEN) 00000000eff18000 - 00000000eff22000 (usable)
(XEN) 00000000eff22000 - 00000000eff24000 (ACPI data)
(XEN) 00000000eff24000 - 00000000eff28000 (ACPI NVS)
(XEN) 00000000eff28000 - 00000000effd0000 (usable)
(XEN) 00000000effd0000 - 00000000efff0000 (reserved)
(XEN) 00000000efff0000 - 00000000f0000000 (usable)
(XEN) 0000000100000000 - 000000050eded000 (usable)
(XEN) ACPI: System description tables not found
(XEN) System RAM: 20459MB (20950796kB)
(XEN) Domain heap initialised
(XEN) Found and enabled local APIC!
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3093.178 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) Platform timer is 1.193MHz PIT
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 1 CPUs
(XEN) tmem: initialized comp=1 dedup=1 tze=0
(XEN) xenoprof: Initialization failed. Intel processor family 6 model 58is not supported
(XEN) Dom0 has maximum 208 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ff4000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000438000000->000000043c000000 (404562 pages to be allocated)
(XEN) Init. ramdisk: 000000050d852000->000000050ebffe4d
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81ff4000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: ffffffff81ff4000->ffffffff82334000
(XEN) Start info: ffffffff82334000->ffffffff823344b4
(XEN) Page tables: ffffffff82335000->ffffffff8234a000
(XEN) Boot stack: ffffffff8234a000->ffffffff8234b000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff81d3a1f0
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs
(XEN)
..................................................................................................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 316kB init memory.
mapping kernel into physical memory
about to get started...
[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-27-generic (root@localhost) (gcc version 4.8.4 (Ubuntu
4.8.4-2ubuntu1~14.04) ) #30~14.04.1 SMP Wed Sep 2 16:12:37 BST 2015 (Ubuntu 3.19.0-27.29~14.04.1-generic
3.19.8-ckt5)
[ 0.000000] Command line: root=/dev/loop0 ro console=hvc0 console=tty1 earlyprintk=xen nomodeset tmem
break=modules
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000068060fff] usable
[ 0.000000] Xen: [mem 0x0000000068061000-0x00000000eecf4fff] unusable
[ 0.000000] Xen: [mem 0x00000000eecf5000-0x00000000eee43fff] reserved
[ 0.000000] Xen: [mem 0x00000000eee44000-0x00000000efec3fff] unusable
[ 0.000000] Xen: [mem 0x00000000efec4000-0x00000000eff17fff] reserved
[ 0.000000] Xen: [mem 0x00000000eff18000-0x00000000eff21fff] unusable
[ 0.000000] Xen: [mem 0x00000000eff22000-0x00000000eff23fff] ACPI data
[ 0.000000] Xen: [mem 0x00000000eff24000-0x00000000eff27fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000eff28000-0x00000000effcffff] unusable
[ 0.000000] Xen: [mem 0x00000000effd0000-0x00000000effeffff] reserved
[ 0.000000] Xen: [mem 0x00000000efff0000-0x00000000efffffff] unusable
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000050edecfff] unusable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] efi: SMBIOS=0xeed00000
[ 0.000000] efi: EFI_MEMMAP is not enabled.
[ 0.000000] esrt: ESRT header is not in the memory map.
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x68061 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x67e00000-0x67ffffff]
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x67dfffff]
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[ 0.000000] init_memory_mapping: [mem 0x68000000-0x68060fff]
[ 0.000000] RAMDISK: [mem 0x04000000-0x053adfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: System description tables not found
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000068060fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x67cd1000-0x67cd5fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0x68060fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x68060fff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x68060fff]
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 97 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xf0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.5.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880067600000 s85888 r8192 d28800 u2097152
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 419304
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/loop0 ro console=hvc0 console=tty1 earlyprintk=xen nomodeset
tmem break=modules
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 00000000c0000082 from 0xffff82d080453000 to 0xffffffff817be150.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 00000000c0000083 from 0xffff82d080453080 to 0xffffffff817c0750.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 0000000000000174 from 0x000000000000e008 to 0x0000000000000010.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 0000000000000175 from 0xffff82d080457fc0 to 0x0000000000000000.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 0000000000000176 from 0xffff82d0802240a0 to 0xffffffff817c0a60.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 00000000c0000083 from 0xffff82d080453080 to 0xffffffff817c0ca0.
(XEN) traps.c:2589:d0v0 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
[ 0.000000] software IO TLB [mem 0x61800000-0x65800000] (64MB) mapped at [ffff880061800000-ffff8800657fffff]
[ 0.000000] Memory: 1565680K/1703932K available (7949K kernel code, 1167K rwdata, 3748K rodata, 1404K init,
1284K bss, 138252K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:32 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] bootconsole [xenboot0] disabled
[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-27-generic (root@localhost) (gcc version 4.8.4 (Ubuntu
4.8.4-2ubuntu1~14.04) ) #30~14.04.1 SMP Wed Sep 2 16:12:37 BST 2015 (Ubuntu 3.19.0-27.29~14.04.1-generic
3.19.8-ckt5)
[ 0.000000] Command line: root=/dev/loop0 ro console=hvc0 console=tty1 earlyprintk=xen nomodeset break=modules
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000068060fff] usable
[ 0.000000] Xen: [mem 0x0000000068061000-0x00000000eecf4fff] unusable
[ 0.000000] Xen: [mem 0x00000000eecf5000-0x00000000eee43fff] reserved
[ 0.000000] Xen: [mem 0x00000000eee44000-0x00000000efec3fff] unusable
[ 0.000000] Xen: [mem 0x00000000efec4000-0x00000000eff17fff] reserved
[ 0.000000] Xen: [mem 0x00000000eff18000-0x00000000eff21fff] unusable
[ 0.000000] Xen: [mem 0x00000000eff22000-0x00000000eff23fff] ACPI data
[ 0.000000] Xen: [mem 0x00000000eff24000-0x00000000eff27fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000eff28000-0x00000000effcffff] unusable
[ 0.000000] Xen: [mem 0x00000000effd0000-0x00000000effeffff] reserved
[ 0.000000] Xen: [mem 0x00000000efff0000-0x00000000efffffff] unusable
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000050edecfff] unusable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] efi: SMBIOS=0xeed00000
[ 0.000000] efi: EFI_MEMMAP is not enabled.
[ 0.000000] esrt: ESRT header is not in the memory map.
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x68061 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x67e00000-0x67ffffff]
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x67dfffff]
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[ 0.000000] init_memory_mapping: [mem 0x68000000-0x68060fff]
[ 0.000000] RAMDISK: [mem 0x04000000-0x053adfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: System description tables not found
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000068060fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x67cd1000-0x67cd5fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0x68060fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x68060fff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x68060fff]
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 97 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xf0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.5.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880067600000 s85888 r8192 d28800 u2097152
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 419304
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/loop0 ro console=hvc0 console=tty1 earlyprintk=xen nomodeset
tmem break=modules
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x61800000-0x65800000] (64MB) mapped at [ffff880061800000-ffff8800657fffff]
[ 0.000000] Memory: 1565680K/1703932K available (7949K kernel code, 1167K rwdata, 3748K rodata, 1404K init,
1284K bss, 138252K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:32 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] bootconsole [xenboot0] disabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3093.178 MHz processor
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.35 BogoMIPS
(lpj=12372712)
[ 0.011695] pid_max: default: 32768 minimum: 301
[ 0.012409] Security Framework initialized
[ 0.016036] AppArmor: AppArmor initialized
[ 0.020007] Yama: becoming mindful.
[ 0.024536] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.028927] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.032372] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.036031] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.040365] Initializing cgroup subsys memory
[ 0.044025] Initializing cgroup subsys devices
[ 0.048016] Initializing cgroup subsys freezer
[ 0.052018] Initializing cgroup subsys net_cls
[ 0.056013] Initializing cgroup subsys blkio
[ 0.060018] Initializing cgroup subsys perf_event
[ 0.064042] Initializing cgroup subsys net_prio
[ 0.068016] Initializing cgroup subsys hugetlb
[ 0.072405] CPU: Physical Processor ID: 0
[ 0.076008] CPU: Processor Core ID: 0
[ 0.080597] mce: CPU supports 2 MCE banks
[ 0.084049] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.084049] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.167547] Freeing SMP alternatives memory: 32K (ffffffff81e84000 - ffffffff81e8c000)
[ 0.171470] ftrace: allocating 30109 entries in 118 pages
[ 0.180097] cpu 0 spinlock event irq 17
[ 0.209720] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[ 0.216624] x86: Booted up 1 node, 1 CPUs
[ 0.219436] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.220097] devtmpfs: initialized
[ 0.224259]inctrl subsystem
[ 0.240115] RTC time: 9:19:29, date: 09/04/15
[ 0.243125] NET: Registered protocol family 16
[ 0.244019] xen:grant_table: Grant tables using version 1 layout
[ 0.248012] Grant table initialized
[ 0.250996] PCI: Using configuration type 1 for base access
[ 0.253143] ACPI: Interpreter disabled.
[ 0.256023] xen:balloon: Initialising balloon driver
[ 0.260054] xen_balloon: Initialising balloon driver
[ 0.264084] vgaarb: loaded
[ 0.267394] SCSI subsystem initialized
[ 0.268125] usbcore: registered new interface driver usbfs
[ 0.272027] usbcore: registered new interface driver hub
[ 0.276029] usbcore: registered new device driver usb
[ 0.280195] PCI: Probing PCI hardware
[ 0.284053] PCI host bridge to bus 0000:00
[ 0.288011] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.292016] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.296016] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.334803] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.336012] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.340013] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.344011] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.380009] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.384126] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.481077] vgaarb: setting as boot device: PCI:0000:00:03.0
[ 0.484000] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.658491] NetLabel: Initializing
[ 0.660010] NetLabel: domain hash size = 128
[ 0.664005] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.668021] NetLabel: unlabeled traffic allowed by default
[ 0.672107] Switched to clocksource xen
[ 0.678998] AppArmor: AppArmor Filesystem Enabled
[ 0.682732] pnp: PnP ACPI: disabled
[ 0.686495] NET: Registered protocol family 2
[ 0.690206] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.695886] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.701146] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.705976] TCP: reno registered
[ 0.708638] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.713622] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.718558] NET: Registered protocol family 1
[ 0.722343] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.727097] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.731599] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.738843] Trying to unpack rootfs image as initramfs...
[ 0.993293] Freeing initrd memory: 20152K (ffff880004000000 - ffff8800053ae000)
[ 1.001451] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.007918] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms
ovfl timer
[ 1.015854] Scanning for low memory corruption every 60 seconds
[ 1.020402] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.025574] Initialise system trusted keyring
[ 1.029131] audit: initializing netlink subsys (disabled)
[ 1.033285] audit: type=2000 audit(1441358369.897:1): initialized
[ 1.038897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.046099] zpool: loaded
[ 1.048902] zbud: loaded
[ 1.051604] VFS: Disk quotas dquot_6.5.2
[ 1.055733] VFS: Dquot-cache hash table entried (default)
[ 1.093952] io scheduler cfq registered
[ 1.097192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.101588] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.107280] efifb: probing for efifb
[ 1.110355] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90040400000, using 1876k, total 1875k
[ 1.117816] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.122449] efifb: scrolling: redraw
[ 1.125626] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.131187] Console: switching to colour frame buffer device 100x37
[ 1.138084] fb0: EFI VGA frame buffer device
[ 1.142969] xen:xen_evtchn: Event-channel device installed
[ 1.149381] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.157989] Linux agpgart interface v0.103
[ 1.164282] brd: module loaded
[ 1.169291] loop: module loaded
[ 1.174623] scsi host0: ata_piix
[ 1.179072] scsi host1: ata_piix
[ 1.183777] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc520 irq 14
[ 1.192034] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc528 irq 15
[ 1.199223] libphy: Fixed MDIO Bus: probed
[ 1.202671] tun: Universal TUN/TAP device driver, 1.6
[ 1.207344] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.214886] xen_netfront: Initialising Xen virtual ethernet driver
[ 1.220446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.226210] ehci-pci: EHCI PCI platform driver
[ 1.230120] ehci-platform: EHCI generic platform driver
[ 1.234669] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.240264] ohci-pci: OHCI PCI platform driver
[ 1.244668] ohci-platform: OHCI generic platform driver
[ 1.249638] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.258325] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.264584] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.273332] uhci_hcd 0000:00:01.2: detected 2 ports
[ 1.279682] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c500
[ 1.287548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.298012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.308733] usb usb1: Product: UHCI Host Controller
[ 1.316312] usb usb1: Manufacturer: Linux 3.19.0-27-generic uhci_hcd
[ 1.326807] usb usb1: SerialNumber: 0000:00:01.2
[ 1.335295] hub 1-0:1.0: USB hub found
[ 1.343430] hub 1-0:1.0: 2 ports detected
[ 1.351699] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.376929] ata1.00: ATA-7: QEMU HARDDISK, 2.2.0, max UDMA/100
[ 1.387276] ata1.00: 8388608 sectors, multi 16: LBA48
[ 1.403654] ata1.00: configured for MWDMA2
[ 1.411713] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0 PQ: 0 ANSI: 5
[ 1.425605] sd 0:0:0:0: [sda] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
[ 1.438165] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.447011] sd 0:0:0:0: [sda] Write Protect is off
[ 1.455946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.616601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.625921] mousedev: PS/2 mouse device common for all mice
[ 1.637824] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.653607] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.665069] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.676792] i2c /dev entries driver
[ 1.683411] device-mapper: uevent: version 1.0.3
[ 1.692288] usb 1-1: new c_cmos: setting system clock to 2015-09-04 09:19:31 UTC (1441358371)
[ 1.917528] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 5.112662] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 5.126277] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 5.139889] usb 1-1: Product: QEMU USB Tablet
[ 5.148829] usb 1-1: Manufacturer: QEMU
[ 5.156658] usb 1-1: SerialNumber: 42
[ 31.848126] ata1: lost interrupt (Status 0x50)
[ 31.856270] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 31.867656] ata1.00: failed command: READ DMA
[ 31.876628] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 31.876628] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 31.901212] ata1.00: status: { DRDY }
[ 31.908881] ata1: soft resetting link
[ 32.086514] ata1.00: configured for MWDMA2
[ 32.094305] ata1.00: device reported invalid CHS sector 0
[ 32.103392] ata1: EH complete
Linux only boot
vmlinuz root=/dev/loop0 ro console=ttyS0 console=tty1 nomodeset break=modules initrd=\EFI\Xen\initrd.img
[ 0.000000] Initializing cgroup subsys cpusetg-lts-vivid-generic
[ 0.000000] Initializing cgroup subsys cpuz-lts-vivid-generic
[ 0.000000] Initializing cgroup subsys cpuacctefi
[ 0.000000] Linux version 3.19.0-27-generic (root@localhost) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04)
) #29~14.04.1 SMP Wed Sep 2 16:12:37 BST 2015 (Ubuntu 3.19.0-27.29~14.04.1-generic 3.19.8-ckt5)
[ 0.000000] Command line: vmlinuzroot=/dev/loop0 ro console=ttyS0 console=tty1 nomodeset break=modules initrd=\EFI\Xen\initrd.img
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000eecf4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000eecf5000-0x00000000eee43fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000eee44000-0x00000000efec3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000efec4000-0x00000000eff17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000eff18000-0x00000000eff21fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000eff22000-0x00000000eff23fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000eff24000-0x00000000eff27fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000eff28000-0x00000000effcffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000effd0000-0x00000000effeffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000efff0000-0x00000000efffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040edecfff] usable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] efi: SMBIOS=0xeed00000
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.5.
[ 0.000000] Xen Platform PCI: unrecognised magic value
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x40eded max_arch_pfn = 0x400000000
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x40ea00000-0x40ebfffff]
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x40e9fffff]
[ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xeecf4fff]
[ 0.000000] init_memory_mapping: [mem 0xeee44000-0xefec3fff]
[ 0.000000] init_memory_mapping: [mem 0xeff18000-0xeff21fff]
[ 0.000000] init_memory_mapping: [mem 0xeff28000-0xeffcffff]
[ 0.000000] init_memory_mapping: [mem 0xefff0000-0xefffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[ 0.000000] init_memory_mapping: [mem 0x40ec00000-0x40edecfff]
[ 0.000000] RAMDISK: [mem 0x7ec52000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: System description tables not found
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000040edecfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x40ede8000-0x40edecfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x40edecfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xeecf4fff]
[ 0.000000] node 0: [mem 0xeee44000-0xefec3fff]
[ 0.000000] node 0: [mem 0xeff18000-0xeff21fff]
[ 0.000000] node 0: [mem 0xeff28000-0xeffcffff]
[ 0.000000] node 0: [mem 0xefff0000-0xefffffff]
[ 0.000000] node 0: [mem 0x100000000-0x40edecfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x40edecfff]
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88040e800000 s85888 r8192 d28800 u2097152
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4121627
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 16363160K/16756488K available (7949K kernel code, 1167K rwdata, 3748K rodata, 1404K init, 1284K bss, 393328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:32 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] bootconsole [xenboot0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 3093.088 MHz processor
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.17 BogoMIPS (lpj=12372352)
[ 0.009801] pid_max: default: 32768 minimum: 301
[ 0.012740] Security Framework initialized
[ 0.016016] AppArmor: AppArmor initialized
[ 0.018578] Yama: becoming mindful.
[ 0.020928] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.031537] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.040931] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.044043] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052310] Initializing cgroup subsys memory
[ 0.056015] Initializing cgroup subsys devices
[ 0.064010] Initializing cgroup subsys freezer
[ 0.068012] Initializing cgroup subsys net_cls
[ 0.072011] Initializing cgroup subsys blkio
[ 0.080010] Initializing cgroup subsys perf_event
[ 0.084011] Initializing cgroup subsys net_prio
[ 0.092010] Initializing cgroup subsys hugetlb
[ 0.096152] CPU: Physical Processor ID: 0
[ 0.100007] CPU: Processor Core ID: 0
[ 0.104565] mce: CPU supports 2 MCE banks
[ 0.112049] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.112049] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.140467] Freeing SMP alternatives memory: 32K (ffffffffa3e84000 - ffffffffa3e8c000)
[ 0.148182] ftrace: allocating 30109 entries in 118 pages
[ 0.192055] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.196010] smpboot: SMP motherboard not detected
[ 0.200148] installing Xen timer for CPU 0
[ 0.202301] smpboot: SMP disabled
[ 0.204000] cpu 0 spinlock event irq 21
[ 0.208225] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[ 0.212585] x86: Booted up 1 node, 1 CPUs
[ 0.214576] smpboot: Total of 1 processors activated (6186.17 BogoMIPS)
[ 0.216047] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.219607] devtmpfs: initialized
[ 0.222804] evm: security.selinux
[ 0.224005] evm: security.SMACK64
[ 0.225776] evm: security.SMACK64EXEC
[ 0.227970] evm: security.SMACK64TRANSMUTE
[ 0.228005] evm: security.SMACK64MMAP
[ 0.230433] evm: security.ima
[ 0.232005] evm: security.capability
[ 0.234459] pinctrl core: initialized pinctrl subsystem
[ 0.236089] RTC time: 11:23:44, date: 09/04/15
[ 0.238467] NET: Registered protocol family 16
[ 0.240137] cpuidle: using governor ladder
[ 0.242766] cpuidle: using governor menu
[ 0.244345] PCI: Using configuration type 1 for base access
[ 0.248854] ACPI: Interpreter disabled.
[ 0.251031] xen:balloon: Initialising balloon driver
[ 0.252034] xen_balloon: Initialising balloon driver
[ 0.254701] vgaarb: loaded
[ 0.256180] SCSI subsystem initialized
[ 0.258952] usbcore: registered new interface driver usbfs
[ 0.260016] usbcore: registered new interface driver hub
[ 0.263985] usbcore: registered new device driver usb
[ 0.264202] PCI: Probing PCI hardware
[ 0.266751] PCI host bridge to bus 0000:00
[ 0.268010] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.272009] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.276008] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.312152] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.316007] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.319538] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.320006] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.341623] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.344036] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.456642] vgaarb: setting as boot device: PCI:0000:00:03.0
[ 0.460000] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.677008] NetLabel: Initializing
[ 0.678819] NetLabel: domain hash size = 128
[ 0.680004] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.682336] NetLabel: unlabeled traffic allowed by default
[ 0.684098] Switched to clocksource xen
[ 0.689826] AppArmor: AppArmor Filesystem Enabled
[ 0.692220] pnp: PnP ACPI: disabled
[ 0.695196] NET: Registered protocol family 2
[ 0.697914] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.702334] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.706153] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.709327] TCP: reno registered
[ 0.710945] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.714017] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.717732] NET: Registered protocol family 1
[ 0.720647] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.724106] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.727446] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.733703] Trying to unpack rootfs image as initramfs...
[ 0.744442] init_memory_mapping: [mem 0x410000000-0x417ffffff]
[ 1.055570] Freeing initrd memory: 20152K (ffff88007ec52000 - ffff880080000000)
[ 1.059774] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.062707] software IO TLB [mem 0xe8000000-0xec000000] (64MB) mapped at [ffff8800e8000000-ffff8800ebffffff]
[ 1.067484] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.071047] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms
ovfl timer
[ 1.076203] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19
[ 1.078946] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.082855] Scanning for low memory corruption every 60 seconds
[ 1.085790] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.088666] Initialise system trusted keyring
[ 1.090786] audit: initializing netlink subsys (disabled)
[ 1.093266] audit: type=2000 audit(1441365825.045:1): initialized
[ 1.096435] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.100336] zpool: loaded
[ 1.101623] zbud: loaded
[ 1.103214] VFS: Disk quotas dquot_6.5.2
[ 1.105323] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.108982] fuse init (API version 7.23)
[ 1.111085] Key type big_key registered
[ 1.113241] Key type asymmetric registered
[ 1.115635] Asymmetric key parser 'x509' registered
[ 1.118313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.122514] io scheduler noop registered
[ 1.124401] io scheduler deadline registered (default)
[ 1.127270] io scheduler cfq registered
[ 1.129466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.132920] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.136635] efifb: probing for efifb
[ 1.138626] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90001b80000, using 1876k, total 1875k
[ 1.144316] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.148050] efifb: scrolling: redraw
[ 1.150439] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.154332] Console: switching to colour frame buffer device 100x37
[ 1.158181] fb0: EFI VGA frame buffer device
[ 1.160688] xen:xen_evtchn: Event-channel device installed
[ 1.163905] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.194961] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.202581] Linux agpgart interface v0.103
[ 1.207312] brd: module loaded
[ 1.210900] loop: module loaded
[ 1.215767] scsi host0: ata_piix
[ 1.219531] scsi host1: ata_piix
[ 1.222855] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc520 irq 14
[ 1.230450] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc528 irq 15
[ 1.237874] libphy: Fixed MDIO Bus: probed
[ 1.242227] tun: Universal TUN/TAP device driver, 1.6
[ 1.249014] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.259201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.267448] ehci-pci: EHCI PCI platform driver
[ 1.273426] ehci-platform: EHCI generic platform driver
[ 1.279886] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.287829] ohci-pci: OHCI PCI platform driver
[ 1.293405] ohci-platform: OHCI generic platform driver
[ 1.299924] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.310552] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.316839] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.325677] uhci_hcd 0000:00:01.2: detected 2 ports
[ 1.332401] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c500
[ 1.339625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.348612] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.358865] usb usb1: Product: UHCI Host Controller
[ 1.366085] usb usb1: Manufacturer: Linux 3.19.0-27-generic uhci_hcd
[ 1.374839] usb usb1: SerialNumber: 0000:00:01.2
[ 1.380642] hub 1-0:1.0: USB hub found
[ 1.386074] hub 1-0:1.0: 2 ports detected
[ 1.392603] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.403969] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.411047] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.423726] ata1.00: ATA-7: QEMU HARDDISK, 2.2.0, max UDMA/100
[ 1.431404] ata1.00: 8388608 sectors, multi 16: LBA48
[ 1.439358] mousedev: PS/2 mouse device common for all mice
[ 1.448671] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.459490] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.468033] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.476418] i2c /dev entries driver
[ 1.481983] device-mapper: uevent: version 1.0.3
[ 1.489608] ata1.00: configured for MWDMA2
[ 1.497003] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0 PQ: 0 ANSI: 5
[ 1.507023] sd 0:0:0:0: [sda] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
[ 1.515686] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.522473] sd 0:0:0:0: [sda] Write Protect is off
[ 1.528503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.540323] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.549694] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.556806] EFI Variables Facility v0.08 2004-May-17
[ 1.566438] aufs 3.x-rcN-20150105
[ 1.570976] TCP: cubic registered
[ 1.575388] NET: Registered protocol family 10
[ 1.581941] NET: Registered protocol family 17
[ 1.587703] Key type dns_resolver registered
[ 1.593177] Loading compiled-in X.509 certificates
[ 1.599960] Loaded X.509 cert 'Magrathea: Glacier signing key: 3ab6be79b1b7eecbae272b00f23775ee0741adc0'
[ 1.611511] registered taskstats version 1
[ 1.624792] sda: sda1 sda2
[ 1.630589] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.637781] Key type trusted registered
[ 1.646976] Key type encrypted registered
[ 1.652255] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.659717] ima: No TPM chip found, activating TPM-bypass!
[ 1.666750] evm: HMAC attrs: 0x1
[ 1.672621] Magic number: 15:306:377
[ 1.678083] rtc_cmos rtc_cmos: setting system clock to 2015-09-04 11:23:45 UTC (1441365825)
[ 1.689072] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.697831] EDD information not available.
[ 1.704516] Freeing unused kernel memory: 1404K (ffffffffa3d25000 - ffffffffa3e84000)
[ 1.715080] Write protecting the kernel read-only data: 12288k
[ 1.722851] Freeing unused kernel memory: 232K (ffff8800237c6000 - ffff880023800000)
[ 1.733172] Freeing unused kernel memory: 348K (ffff880023ba9000 - ffff880023c00000)
[ 1.760182] systemd-udevd[104]: starting version 204
[ 1.792082] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.817157] 8139cp 0000:00:04.0 eth0: RTL-8139C+ at 0xffffc90001b22400, 00:16:3e:01:3d:23, IRQ 11
[ 1.844373] 8139cp 0000:00:05.0 eth1: RTL-8139C+ at 0xffffc90001b28500, 00:16:3e:02:3d:23, IRQ 10
[ 1.870893] 8139cp 0000:00:06.0 eth2: RTL-8139C+ at 0xffffc90001b2a600, 00:16:3e:03:3d:23, IRQ 10
[ 1.898048] 8139cp 0000:00:07.0 eth3: RTL-8139C+ at 0xffffc90001b2c700, 00:16:3e:04:3d:23, IRQ 11
[ 1.910575] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.923902] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.934759] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.944563] usbcore: registered new interface driver usbhid
[ 1.952026] usbhid: USB HID core driver
[ 1.966778] sym0: <895a> rev 0x0 at pci 0000:00:02.0 irq 10
[ 2.116320] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 2.120640] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 2.124619] usb 1-1: Product: QEMU USB Tablet
[ 2.127218] usb 1-1: Manufacturer: QEMU
[ 2.129673] usb 1-1: SerialNumber: 42
[ 2.138458] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[ 2.145968] sym0: SCSI BUS has been reset.
[ 2.152669] scsi host2: sym-2.2.3
[ 2.269760] input: QEMU QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/inpu
t/input3
[ 2.289486] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on
usb-0000:
00:01.2-1/input0
[ 3.047034] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 5.141175] sym0: unknown interrupt(s) ignored, ISTAT=0x5 DSTAT=0x80 SIST=0x0
[ 5.150880] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.2. PQ: 0 ANSI: 5
[ 5.161867] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[ 5.171433] scsi target2:0:0: Beginning Domain Validation
[ 5.180902] scsi target2:0:0: Domain Validation skipping write tests
[ 5.189206] scsi target2:0:0: Ending Domain Validation
[ 5.213690] sd 2:0:0:0: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 5.220333] sd 2:0:0:0: Attached scsi generic sgCSI disk
[ 64.160052] random: nonblocking pool is initialized
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread