* [TESTDAY] Test report of ARM CubieTruck with Xen 4.7 (staging)
@ 2016-03-30 15:30 Konrad Rzeszutek Wilk
2016-04-01 16:07 ` Julien Grall
0 siblings, 1 reply; 2+ messages in thread
From: Konrad Rzeszutek Wilk @ 2016-03-30 15:30 UTC (permalink / raw)
To: xen-devel; +Cc: julien.grall
*Hardware: ARM CubieTruck A20 (2GB).
*Software: Linaro 14.04 with
- Xen 4.7 (829e03c acpi: drop CONFIG_ACPI_BOOT and use CONFIG_ACPI instead + xsplice.v5)
- Linux v4.5 (with revert of 88f8b1bb41c6208f81b6a480244533ded7b59493 "
stmmac: Fix 'eth0: No PHY found' regression")
- Linux v4.4
- Linux v4.3
- Linux v4.2
*Guest operating systems: Ubuntu 14.04
*Functionality tested: ARM Manual Smoke Test
*Comments:
I get these:
(XEN) Freed 260kB init memory.
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
(XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0
(XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [TESTDAY] Test report of ARM CubieTruck with Xen 4.7 (staging)
2016-03-30 15:30 [TESTDAY] Test report of ARM CubieTruck with Xen 4.7 (staging) Konrad Rzeszutek Wilk
@ 2016-04-01 16:07 ` Julien Grall
0 siblings, 0 replies; 2+ messages in thread
From: Julien Grall @ 2016-04-01 16:07 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, xen-devel, sstabellini
Hi Konrad,
Thank you for testing Xen ARM on the cubietruck!
On 30/03/16 16:30, Konrad Rzeszutek Wilk wrote:
> *Hardware: ARM CubieTruck A20 (2GB).
>
> *Software: Linaro 14.04 with
> - Xen 4.7 (829e03c acpi: drop CONFIG_ACPI_BOOT and use CONFIG_ACPI instead + xsplice.v5)
> - Linux v4.5 (with revert of 88f8b1bb41c6208f81b6a480244533ded7b59493 "
> stmmac: Fix 'eth0: No PHY found' regression")
> - Linux v4.4
> - Linux v4.3
> - Linux v4.2
>
> *Guest operating systems: Ubuntu 14.04
>
> *Functionality tested: ARM Manual Smoke Test
>
> *Comments:
>
> I get these:
>
> (XEN) Freed 260kB init memory.
> (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
> (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
> (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
> (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
> (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
> (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0
> (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
Xen doesn't currently emulate the registers I*ACTIVERn. For now, it's
not a big problem as the usage of I*ACTIVER0 is very limited. This will
need to be supported properly when migration will be added for ARM.
Regards,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-01 16:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-30 15:30 [TESTDAY] Test report of ARM CubieTruck with Xen 4.7 (staging) Konrad Rzeszutek Wilk
2016-04-01 16:07 ` Julien Grall
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).