xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Jan Beulich <jbeulich@suse.com>
Cc: keir@xen.org, andrew.cooper3@citrix.com,
	ian.jackson@eu.citrix.com, mpohlack@amazon.com, tim@xen.org,
	ross.lagerwall@citrix.com, sasha.levin@oracle.com,
	xen-devel@lists.xenproject.org
Subject: Re: [PATCH v8.1 10/27] xsplice: Add helper elf routines
Date: Mon, 18 Apr 2016 01:53:52 -0400	[thread overview]
Message-ID: <20160418055351.GA26968@localhost.localdomain> (raw)
In-Reply-To: <5714063B02000078000E6AE0@prv-mh.provo.novell.com>

. snip..
> >+static int elf_resolve_sections(struct xsplice_elf *elf, const void *data)
> >+{
> >+ struct xsplice_elf_sec *sec;
> >+ unsigned int i;
> >+ Elf_Off delta;
> >+ int rc;
> >+
> >+ /* xsplice_elf_load sanity checked e_shnum. */
> >+ sec = xmalloc_array(struct xsplice_elf_sec, elf->hdr->e_shnum);
> >+ if ( !sec )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE"%s: Could not allocate memory for section table!\n",
> >+ elf->name);
> >+ return -ENOMEM;
> >+ }
> >+
> >+ elf->sec = sec;
> >+
> >+ delta = elf->hdr->e_shoff + elf->hdr->e_shnum * elf->hdr->e_shentsize;
> 
> I think Andrew had asked this before - are we not worried of overflow here?

Yes. That ends up being checked in xsplice_header_check. Added comment
here.

> 
> >+ if ( delta > elf->len )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Section table is past end of payload!\n",
> >+ elf->name);
> >+ return -EINVAL;
> >+ }
> >+
> >+ for ( i = 1; i < elf->hdr->e_shnum; i++ )
> >+ {
> >+ delta = elf->hdr->e_shoff + i * elf->hdr->e_shentsize;
> >+
> >+ sec[i].sec = (void *)data + delta;
> 
> Casting away constness is one of the main reasons I complain about casts in
> general. If you really need to modify some fields in the section header, you should
> imo cast away constness just there. But even better would be if you left the

In earlier reviews you said that casting away constness in
function would be a big no no.

> section header alone.

I modify  sec[i].sec->sh_entsize in calc_section
> 
> >+ delta = sec[i].sec->sh_offset;
> >+
> >+ /*
> >+ * N.B. elf_resolve_section_names, elf_get_sym skip this check as
> >+ * we do it here.
> >+ */
> >+ if ( delta && (delta + sec[i].sec->sh_size > elf->len) )
> 
> Allowing delta to be zero here seems suspicious: Are you doing that because
> some sections come without data (and hence without offset)? In that case you'd
> better skip the check on those section types (e.g. SHT_NOBITS) only. In fact
> the offset being below the end of the ELF header would likely indicate a broken
> image.

The loop (earlier) had started at 0 so the delta could have been zero.
Anyhow that not being the case anymore I will just do:

if ( !delta )
	return -EINVAL;
> 
> >+ /* Name is populated in xsplice_elf_sections_name. */
> 
> Stale function name afaict.
> 
> >+ /*
> >+ * elf->symtab->sec->sh_link would point to the right section
> >+ * but we hadn't finished parsing all the sections.
> >+ */
> >+ if ( elf->symtab->sec->sh_link > elf->hdr->e_shnum )
> 
> >= (and I know I had asked before to check all these bounds checks for off
> by one errors)
> 
> >+ if ( !elf->symtab->sec->sh_size ||
> >+ elf->symtab->sec->sh_entsize < sizeof(Elf_Sym) )
> 
> || sh_size % sh_entsize
> 
> >+ /*
> >+ * There can be multiple SHT_STRTAB (.shstrtab, .strtab) so pick one
> >+ * associated with the symbol table.
> >+ */
> 
> ... pick the one ...
> 
> >+static int elf_resolve_section_names(struct xsplice_elf *elf, const void *data)
> >+{
> >+ const char *shstrtab;
> >+ unsigned int i;
> >+ Elf_Off offset, delta;
> >+ struct xsplice_elf_sec *sec;
> >+ int rc;
> >+
> >+ /*
> >+ * The elf->sec[0 -> e_shnum] structures have been verified by
> >+ * elf_resolve_sections. Find file offset for section string table
> >+ * (normally called .shstrtab)
> >+ */
> >+ sec = &elf->sec[elf->hdr->e_shstrndx];
> >+
> >+ rc = elf_verify_strtab(sec);
> >+ if ( rc )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Section string table is corrupted\n",
> >+ elf->name);
> >+ return rc;
> >+ }
> >+
> >+ /* Verified in elf_resolve_sections but just in case. */
> >+ offset = sec->sec->sh_offset;
> >+ ASSERT(offset < elf->len && (offset + sec->sec->sh_size <= elf->len));
> >+
> >+ shstrtab = data + offset;
> >+
> >+ for ( i = 1; i < elf->hdr->e_shnum; i++ )
> >+ {
> >+ delta = elf->sec[i].sec->sh_name;
> >+
> >+ if ( delta && delta >= sec->sec->sh_size )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: shstrtab [%u] data is past end of payload!\n",
> >+ elf->name, i);
> 
> Isn't this redundant with the check in elf_resolve_sections()? Or is this needed
> because the one here runs before that other one?

We don't verify sh_name in elf_resolve_sections.

This is where we check that sh_name is within the shstrtab.

> 
> >+static int elf_get_sym(struct xsplice_elf *elf, const void *data)
> >+{
> >+ const struct xsplice_elf_sec *symtab_sec, *strtab_sec;
> >+ struct xsplice_elf_sym *sym;
> >+ unsigned int i, delta, offset, nsym;
> >+
> >+ symtab_sec = elf->symtab;
> >+ strtab_sec = elf->strtab;
> >+
> >+ /* Pointers arithmetic to get file offset. */
> >+ offset = strtab_sec->data - data;
> >+
> >+ /* Checked already in elf_resolve_sections, but just in case. */
> >+ ASSERT(offset == strtab_sec->sec->sh_offset);
> >+ ASSERT(offset < elf->len && (offset + strtab_sec->sec->sh_size <= elf->len));
> >+
> >+ /* symtab_sec->data was computed in elf_resolve_sections. */
> >+ ASSERT((symtab_sec->sec->sh_offset + data) == symtab_sec->data);
> >+
> >+ /* No need to check values as elf_resolve_sections did it. */
> >+ nsym = symtab_sec->sec->sh_size / symtab_sec->sec->sh_entsize;
> >+
> >+ sym = xmalloc_array(struct xsplice_elf_sym, nsym);
> >+ if ( !sym )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Could not allocate memory for symbols\n",
> >+ elf->name);
> >+ return -ENOMEM;
> >+ }
> >+
> >+ /* So we don't leak memory. */
> >+ elf->sym = sym;
> >+
> >+ for ( i = 1; i < nsym; i++ )
> >+ {
> >+ Elf_Sym *s = &((Elf_Sym *)symtab_sec->data)[i];
> >+
> >+ /* If st->name is STN_UNDEF zero, the check will always be true. */
> >+ delta = s->st_name;
> >+
> >+ if ( delta && (delta > strtab_sec->sec->sh_size) )
> 
> Now here I don't see why you special case delta being zero, the more with the
> comment right above.

That one is stale. Removed the 'if ( delta)' part and the comment.
> 
> >+static int xsplice_header_check(const struct xsplice_elf *elf)
> >+{
> >+ const Elf_Ehdr *hdr = elf->hdr;
> >+
> >+ if ( sizeof(*elf->hdr) > elf->len )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Section header is bigger than payload!\n",
> >+ elf->name);
> >+ return -EINVAL;
> >+ }
> >+
> >+ if ( !IS_ELF(*hdr) )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Not an ELF payload!\n", elf->name);
> >+ return -EINVAL;
> >+ }
> >+
> >+ if ( hdr->e_ident[EI_CLASS] != ELFCLASS64 ||
> >+ hdr->e_ident[EI_DATA] != ELFDATA2LSB ||
> >+ hdr->e_ident[EI_OSABI] != ELFOSABI_SYSV ||
> >+ hdr->e_type != ET_REL ||
> >+ hdr->e_phnum != 0 )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Invalid ELF payload!\n", elf->name);
> >+ return -EOPNOTSUPP;
> >+ }
> >+
> >+ if ( elf->hdr->e_shstrndx == SHN_UNDEF )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Section name idx is undefined!?\n",
> >+ elf->name);
> >+ return -EINVAL;
> >+ }
> >+
> >+ /* Check that section name index is within the sections. */
> >+ if ( elf->hdr->e_shstrndx >= elf->hdr->e_shnum )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Section name idx (%u) is past end of sections (%u)!\n",
> >+ elf->name, elf->hdr->e_shstrndx, elf->hdr->e_shnum);
> >+ return -EINVAL;
> >+ }
> >+
> >+ if ( elf->hdr->e_shnum > 64 )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Too many (%u) sections!\n",
> >+ elf->name, elf->hdr->e_shnum);
> >+ return -EINVAL;
> 
> This isn't invalid, but unsupported.
> 
> >+ if ( elf->hdr->e_shoff > elf->len )
> >+ {
> >+ dprintk(XENLOG_ERR, XSPLICE "%s: Bogus e_shoff!\n", elf->name);
> >+ return -EINVAL;
> >+ }
> 
> If this check is needed, then >=. But I think it should be redundant with the more
> complete one in elf_resolve_sections().

This is the overflow check Andrew asked for.
> 
> >+struct xsplice_elf_sec {
> >+ Elf_Shdr *sec; /* Hooked up in elf_resolve_sections.*/
> 
> const
> 
> >+struct xsplice_elf_sym {
> >+ Elf_Sym *sym;
> 
> const

That will make 'xsplice_elf_resolve_symbols' unhappy:

elf->sym[i].sym->st_value = (unsigned
long)symbols_lookup_by_name(elf->sym[i].name);

Unless I cast away constness.
> 
> Jan

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-04-18  5:54 UTC|newest]

Thread overview: 126+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-13 22:01 [PATCH v8.1] xSplice v1 design and implementation Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 01/27] Revert "libxc/libxl/python/xenstat/ocaml: Use new XEN_VERSION hypercall" Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 02/27] Revert "HYPERCALL_version_op. New hypercall mirroring XENVER_ but sane." Konrad Rzeszutek Wilk
2016-04-14 16:14   ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 03/27] xsplice: Design document Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 04/27] xen/xsplice: Hypervisor implementation of XEN_XSPLICE_op Konrad Rzeszutek Wilk
2016-04-14 16:36   ` Jan Beulich
2016-04-15  2:28     ` Konrad Rzeszutek Wilk
2016-04-17  8:05       ` Jan Beulich
2016-04-18  7:48         ` Konrad Rzeszutek Wilk
2016-04-18 16:33           ` Jan Beulich
2016-04-19 10:14             ` Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 05/27] libxc: Implementation of XEN_XSPLICE_op in libxc Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 06/27] xen-xsplice: Tool to manipulate xsplice payloads Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 07/27] arm/x86: Use struct virtual_region to do bug, symbol, and (x86) exception tables lookup Konrad Rzeszutek Wilk
2016-04-14 16:50   ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 08/27] arm/x86/vmap: Add vmalloc_xen, vfree_xen and vm_init_type Konrad Rzeszutek Wilk
2016-04-17 20:17   ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 09/27] x86/mm: Introduce modify_xen_mappings() Konrad Rzeszutek Wilk
2016-04-14  4:07   ` Jan Beulich
2016-04-14 13:34     ` Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 10/27] xsplice: Add helper elf routines Konrad Rzeszutek Wilk
2016-04-17 20:55   ` Jan Beulich
2016-04-18  5:53     ` Konrad Rzeszutek Wilk [this message]
2016-04-18  6:23       ` Jan Beulich
2016-04-20 16:07         ` Konrad Rzeszutek Wilk
2016-04-20 16:59           ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 11/27] xsplice: Implement payload loading Konrad Rzeszutek Wilk
2016-04-18  6:16   ` Jan Beulich
2016-04-20 15:59     ` Konrad Rzeszutek Wilk
2016-04-20 17:05       ` Jan Beulich
2016-04-20 17:36         ` Konrad Rzeszutek Wilk
2016-04-21  6:41           ` Jan Beulich
2016-04-21 15:15       ` Konrad Rzeszutek Wilk
2016-04-21 15:36         ` Jan Beulich
2016-04-21 16:47           ` Konrad Rzeszutek Wilk
2016-04-22  7:40             ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 12/27] xsplice: Implement support for applying/reverting/replacing patches Konrad Rzeszutek Wilk
2016-04-19  6:27   ` Jan Beulich
2016-04-21  0:28     ` Konrad Rzeszutek Wilk
2016-04-21  6:44       ` Jan Beulich
2016-04-21 20:27         ` Konrad Rzeszutek Wilk
2016-04-22  7:44           ` Jan Beulich
2016-04-22 10:51             ` Konrad Rzeszutek Wilk
2016-04-22 17:26     ` Konrad Rzeszutek Wilk
2016-04-25  7:55       ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 13/27] x86/xen_hello_world.xsplice: Test payload for patching 'xen_extra_version' Konrad Rzeszutek Wilk
2016-04-19 17:40   ` Jan Beulich
2016-04-20 16:10     ` Konrad Rzeszutek Wilk
2016-04-20 17:06       ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 14/27] xsplice, symbols: Implement symbol name resolution on address Konrad Rzeszutek Wilk
2016-04-19 19:31   ` Jan Beulich
2016-04-20 12:55     ` Ross Lagerwall
2016-04-21  0:26     ` Konrad Rzeszutek Wilk
2016-04-21  6:46       ` Jan Beulich
     [not found]         ` <CACJDEmrucgYZpCDv3EAkDJUOtdcP9P2T=Vine1o2pzUmwJDY1w@mail.gmail.com>
     [not found]           ` <CACJDEmrzieYh6__MHJH_okoZPk+RA56PuQKv-oid0j1t1po1oQ@mail.gmail.com>
     [not found]             ` <CACJDEmrdi3sTZjGowkvGP67-_DH3+TLvArC8qZfArsyPb6fpuA@mail.gmail.com>
     [not found]               ` <CACJDEmrQ6onv-xqYOi3nekioCSASb4c1eZHJ-rzMxU3Wa7SXTQ@mail.gmail.com>
2016-04-21 13:56                 ` Konrad Rzeszutek Wilk
2016-04-21 14:25                   ` Jan Beulich
2016-04-22  7:17       ` Ross Lagerwall
2016-04-22  7:51         ` Jan Beulich
2016-04-22  8:45           ` Ross Lagerwall
2016-04-22 10:08             ` Jan Beulich
2016-04-22 10:28               ` Konrad Rzeszutek Wilk
2016-04-22 10:50                 ` Jan Beulich
2016-04-22 11:08                   ` Konrad Rzeszutek Wilk
2016-04-22 11:18                     ` Jan Beulich
2016-04-24 21:41                       ` Konrad Rzeszutek Wilk
2016-04-25  8:02                         ` Jan Beulich
2016-04-22 11:13               ` Ross Lagerwall
2016-04-22 11:24                 ` Jan Beulich
2016-04-22 21:10                   ` Konrad Rzeszutek Wilk
2016-04-25  6:41                     ` Ross Lagerwall
2016-04-25  8:15                       ` Jan Beulich
2016-04-22 14:17                 ` Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 15/27] xsplice, symbols: Implement fast symbol names -> virtual addresses lookup Konrad Rzeszutek Wilk
2016-04-19 19:52   ` Jan Beulich
2016-04-22 15:21     ` Konrad Rzeszutek Wilk
2016-04-25  8:38       ` Jan Beulich
2016-04-25 14:12         ` Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 16/27] x86, xsplice: Print payload's symbol name and payload name in backtraces Konrad Rzeszutek Wilk
2016-04-19 20:09   ` Jan Beulich
2016-04-13 22:01 ` [PATCH v8.1 17/27] xsplice: Add support for bug frames Konrad Rzeszutek Wilk
2016-04-19 20:17   ` Jan Beulich
2016-04-21  0:29     ` Konrad Rzeszutek Wilk
2016-04-21  6:49       ` Jan Beulich
2016-04-22 10:10         ` Konrad Rzeszutek Wilk
2016-04-22 10:28           ` Jan Beulich
2016-04-22 10:54             ` Konrad Rzeszutek Wilk
2016-04-22 10:58               ` Jan Beulich
2016-04-22 11:10                 ` Konrad Rzeszutek Wilk
2016-04-13 22:01 ` [PATCH v8.1 18/27] xsplice: Add support for exception tables Konrad Rzeszutek Wilk
2016-04-19 20:31   ` Jan Beulich
2016-04-13 22:02 ` [PATCH v8.1 19/27] xsplice: Add support for alternatives Konrad Rzeszutek Wilk
2016-04-20  6:28   ` Jan Beulich
2016-04-21  0:30     ` Konrad Rzeszutek Wilk
2016-04-21  6:55       ` Jan Beulich
2016-04-21  0:31     ` Konrad Rzeszutek Wilk
2016-04-21  6:56       ` Jan Beulich
2016-04-22 16:06     ` Konrad Rzeszutek Wilk
2016-04-13 22:02 ` [PATCH v8.1 20/27] build_id: Provide ld-embedded build-ids Konrad Rzeszutek Wilk
2016-04-20  7:14   ` Jan Beulich
2016-04-21  0:33     ` Konrad Rzeszutek Wilk
2016-04-21  6:59       ` Jan Beulich
2016-04-21 20:30         ` Konrad Rzeszutek Wilk
2016-04-22 16:16         ` Konrad Rzeszutek Wilk
2016-04-13 22:02 ` [PATCH v8.1 21/27] xsplice: Print build_id in keyhandler and on bootup Konrad Rzeszutek Wilk
2016-04-13 22:02 ` [PATCH v8.1 22/27] XENVER_build_id/libxc: Provide ld-embedded build-id Konrad Rzeszutek Wilk
2016-04-14 15:03   ` Wei Liu
2016-04-14 15:04   ` Daniel De Graaf
2016-04-20  7:19   ` Jan Beulich
2016-04-13 22:02 ` [PATCH v8.1 23/27] libxl: info: Display build_id of the hypervisor Konrad Rzeszutek Wilk
2016-04-14 15:06   ` Wei Liu
2016-04-13 22:02 ` [PATCH v8.1 24/27] xsplice: Stacking build-id dependency checking Konrad Rzeszutek Wilk
2016-04-20  7:49   ` Jan Beulich
2016-04-22 10:46     ` Konrad Rzeszutek Wilk
2016-04-22 10:55       ` Jan Beulich
2016-04-13 22:02 ` [PATCH v8.1 25/27] xsplice/xen_replace_world: Test-case for XSPLICE_ACTION_REPLACE Konrad Rzeszutek Wilk
2016-04-20 11:12   ` Jan Beulich
2016-04-13 22:02 ` [PATCH v8.1 26/27] xsplice: Prevent duplicate payloads from being loaded Konrad Rzeszutek Wilk
2016-04-20 11:16   ` Jan Beulich
2016-04-13 22:02 ` [PATCH v8.1 27/27] MAINTAINERS/xsplice: Add myself and Ross as the maintainers Konrad Rzeszutek Wilk
2016-04-14 14:26 ` [PATCH v8.1] xSplice v1 design and implementation Konrad Rzeszutek Wilk
2016-04-14 14:29   ` Julien Grall
2016-04-14 15:12   ` Andrew Cooper
2016-04-14 15:17     ` Jan Beulich
2016-04-15  0:55       ` Konrad Rzeszutek Wilk
2016-04-17  8:00         ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160418055351.GA26968@localhost.localdomain \
    --to=konrad.wilk@oracle.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=keir@xen.org \
    --cc=mpohlack@amazon.com \
    --cc=ross.lagerwall@citrix.com \
    --cc=sasha.levin@oracle.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).