From: Anthony PERARD <anthony.perard@citrix.com>
To: xen-devel@lists.xen.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
Wei Liu <wei.liu2@citrix.com>,
George Dunlap <George.Dunlap@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>, Tim Deegan <tim@xen.org>,
Jan Beulich <jbeulich@suse.com>,
Anthony PERARD <anthony.perard@citrix.com>
Subject: [PATCH v6 06/14] xen: Move the hvm_start_info C representation from libxc to public/xen.h
Date: Tue, 12 Jul 2016 15:42:43 +0100 [thread overview]
Message-ID: <20160712144251.558-7-anthony.perard@citrix.com> (raw)
In-Reply-To: <20160712144251.558-1-anthony.perard@citrix.com>
Instead of having several representation of hvm_start_info in C, define
it in public/xen.h so both libxc and hvmloader can use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
---
Changes in V6:
- move C representation to public/arch-x86/hvm/start_info.h instead of
public/xen.h
Change in V5:
- remove packed attribute.
New in V4.
---
tools/libxc/include/xc_dom.h | 31 ----------------
tools/libxc/xc_dom_x86.c | 1 +
xen/include/public/arch-x86/hvm/start_info.h | 53 ++++++++++++++++++++++++++++
3 files changed, 54 insertions(+), 31 deletions(-)
create mode 100644 xen/include/public/arch-x86/hvm/start_info.h
diff --git a/tools/libxc/include/xc_dom.h b/tools/libxc/include/xc_dom.h
index 0629971..de7dca9 100644
--- a/tools/libxc/include/xc_dom.h
+++ b/tools/libxc/include/xc_dom.h
@@ -219,37 +219,6 @@ struct xc_dom_image {
struct xc_hvm_firmware_module smbios_module;
};
-#if defined(__i386__) || defined(__x86_64__)
-/* C representation of the x86/HVM start info layout.
- *
- * The canonical definition of this layout resides in public/xen.h, this
- * is just a way to represent the layout described there using C types.
- *
- * NB: the packed attribute is not really needed, but it helps us enforce
- * the fact this this is just a representation, and it might indeed
- * be required in the future if there are alignment changes.
- */
-struct hvm_start_info {
- uint32_t magic; /* Contains the magic value 0x336ec578 */
- /* ("xEn3" with the 0x80 bit of the "E" set).*/
- uint32_t version; /* Version of this structure. */
- uint32_t flags; /* SIF_xxx flags. */
- uint32_t nr_modules; /* Number of modules passed to the kernel. */
- uint64_t modlist_paddr; /* Physical address of an array of */
- /* hvm_modlist_entry. */
- uint64_t cmdline_paddr; /* Physical address of the command line. */
- uint64_t rsdp_paddr; /* Physical address of the RSDP ACPI data */
- /* structure. */
-} __attribute__((packed));
-
-struct hvm_modlist_entry {
- uint64_t paddr; /* Physical address of the module. */
- uint64_t size; /* Size of the module in bytes. */
- uint64_t cmdline_paddr; /* Physical address of the command line. */
- uint64_t reserved;
-} __attribute__((packed));
-#endif /* x86 */
-
/* --- pluggable kernel loader ------------------------------------- */
struct xc_dom_loader {
diff --git a/tools/libxc/xc_dom_x86.c b/tools/libxc/xc_dom_x86.c
index bc2dbb2..0eab8a7 100644
--- a/tools/libxc/xc_dom_x86.c
+++ b/tools/libxc/xc_dom_x86.c
@@ -32,6 +32,7 @@
#include <xen/foreign/x86_32.h>
#include <xen/foreign/x86_64.h>
#include <xen/hvm/hvm_info_table.h>
+#include <xen/arch-x86/hvm/start_info.h>
#include <xen/io/protocols.h>
#include "xg_private.h"
diff --git a/xen/include/public/arch-x86/hvm/start_info.h b/xen/include/public/arch-x86/hvm/start_info.h
new file mode 100644
index 0000000..6981187
--- /dev/null
+++ b/xen/include/public/arch-x86/hvm/start_info.h
@@ -0,0 +1,53 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2016, Citrix Systems, Inc.
+ */
+
+#ifndef __XEN_PUBLIC_ARCH_X86_HVM_START_INFO_H__
+#define __XEN_PUBLIC_ARCH_X86_HVM_START_INFO_H__
+
+/*
+ * C representation of the x86/HVM start info layout.
+ *
+ * The canonical definition of this layout resides in public/xen.h, this
+ * is just a way to represent the layout described there using C types.
+ *
+ */
+struct hvm_start_info {
+ uint32_t magic; /* Contains the magic value 0x336ec578 */
+ /* ("xEn3" with the 0x80 bit of the "E" set).*/
+ uint32_t version; /* Version of this structure. */
+ uint32_t flags; /* SIF_xxx flags. */
+ uint32_t nr_modules; /* Number of modules passed to the kernel. */
+ uint64_t modlist_paddr; /* Physical address of an array of */
+ /* hvm_modlist_entry. */
+ uint64_t cmdline_paddr; /* Physical address of the command line. */
+ uint64_t rsdp_paddr; /* Physical address of the RSDP ACPI data */
+ /* structure. */
+};
+
+struct hvm_modlist_entry {
+ uint64_t paddr; /* Physical address of the module. */
+ uint64_t size; /* Size of the module in bytes. */
+ uint64_t cmdline_paddr; /* Physical address of the command line. */
+ uint64_t reserved;
+};
+
+#endif /* __XEN_PUBLIC_ARCH_X86_HVM_START_INFO_H__ */
--
Anthony PERARD
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-07-12 14:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 14:42 [PATCH v6 00/14] Load BIOS via toolstack instead of been embedded in hvmloader Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 01/14] libxc: Rework extra module initialisation Anthony PERARD
2016-07-12 15:01 ` Wei Liu
2016-07-12 14:42 ` [PATCH v6 02/14] libxc: Prepare a start info structure for hvmloader Anthony PERARD
2016-07-12 15:01 ` Wei Liu
2016-07-12 14:42 ` [PATCH v6 03/14] configure: #define SEABIOS_PATH and OVMF_PATH Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 04/14] firmware/makefile: install BIOS blob Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 05/14] libxl: Load guest BIOS from file Anthony PERARD
2016-07-12 15:01 ` Wei Liu
2016-07-12 14:42 ` Anthony PERARD [this message]
2016-07-12 14:57 ` [PATCH v6 06/14] xen: Move the hvm_start_info C representation from libxc to public/xen.h Wei Liu
2016-07-12 15:09 ` Andrew Cooper
2016-07-12 15:36 ` Anthony PERARD
2016-07-12 16:07 ` Andrew Cooper
2016-07-14 15:55 ` Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 07/14] hvmloader: Grab the hvm_start_info pointer Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 08/14] hvmloader: Locate the BIOS blob Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 09/14] hvmloader: Check modules whereabouts in perform_tests Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 10/14] hvmloader: Load SeaBIOS from hvm_start_info modules Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 11/14] hvmloader: Load OVMF from modules Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 12/14] hvmloader: bios->bios_load() now needs to be defined Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 13/14] hvmloader: Always build-in SeaBIOS and OVMF loader Anthony PERARD
2016-07-12 14:42 ` [PATCH v6 14/14] configure: do not depend on SEABIOS_PATH or OVMF_PATH Anthony PERARD
2016-07-12 15:03 ` [PATCH v6 00/14] Load BIOS via toolstack instead of been embedded in hvmloader Wei Liu
2016-07-12 15:04 ` Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160712144251.558-7-anthony.perard@citrix.com \
--to=anthony.perard@citrix.com \
--cc=George.Dunlap@eu.citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=sstabellini@kernel.org \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).