[PATCH 4.6 23/56] x86/mm/pat: Add support of non-default PAT MSR setting

[PATCH 4.6 23/56] x86/mm/pat: Add support of non-default PAT MSR setting

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 02f037d641dc6672be5cfe7875a48ab99b95b154 upstream.

In preparation for fixing a regression caused by:

  9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")'

... PAT needs to support a case that PAT MSR is initialized with a
non-default value.

When pat_init() is called and PAT is disabled, it initializes the
PAT table with the BIOS default value. Xen, however, sets PAT MSR
with a non-default value to enable WC. This causes inconsistency
between the PAT table and PAT MSR when PAT is set to disable on Xen.

Change pat_init() to handle the PAT disable cases properly.  Add
init_cache_modes() to handle two cases when PAT is set to disable.

 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR.
 2. CPU does not support PAT: Set PAT table to be consistent with
    PWT and PCD bits in a PTE.

Note, __init_cache_modes(), renamed from pat_init_cache_modes(),
will be changed to a static function in a later patch.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pat.h |    2 -
 arch/x86/mm/pat.c          |   73 ++++++++++++++++++++++++++++++++-------------
 arch/x86/xen/enlighten.c   |    2 -
 3 files changed, 55 insertions(+), 22 deletions(-)

--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -6,7 +6,7 @@
 
 bool pat_enabled(void);
 extern void pat_init(void);
-void pat_init_cache_modes(u64);
+void __init_cache_modes(u64);
 
 extern int reserve_memtype(u64 start, u64 end,
 		enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -181,7 +181,7 @@ static enum page_cache_mode pat_get_cach
  * configuration.
  * Using lower indices is preferred, so we start with highest index.
  */
-void pat_init_cache_modes(u64 pat)
+void __init_cache_modes(u64 pat)
 {
 	enum page_cache_mode cache;
 	char pat_msg[33];
@@ -207,9 +207,6 @@ static void pat_bsp_init(u64 pat)
 		return;
 	}
 
-	if (!pat_enabled())
-		goto done;
-
 	rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
 	if (!tmp_pat) {
 		pat_disable("PAT MSR is 0, disabled.");
@@ -218,15 +215,11 @@ static void pat_bsp_init(u64 pat)
 
 	wrmsrl(MSR_IA32_CR_PAT, pat);
 
-done:
-	pat_init_cache_modes(pat);
+	__init_cache_modes(pat);
 }
 
 static void pat_ap_init(u64 pat)
 {
-	if (!pat_enabled())
-		return;
-
 	if (!cpu_has_pat) {
 		/*
 		 * If this happens we are on a secondary CPU, but switched to
@@ -238,18 +231,32 @@ static void pat_ap_init(u64 pat)
 	wrmsrl(MSR_IA32_CR_PAT, pat);
 }
 
-void pat_init(void)
+static void init_cache_modes(void)
 {
-	u64 pat;
-	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u64 pat = 0;
+	static int init_cm_done;
 
-	if (!pat_enabled()) {
+	if (init_cm_done)
+		return;
+
+	if (boot_cpu_has(X86_FEATURE_PAT)) {
+		/*
+		 * CPU supports PAT. Set PAT table to be consistent with
+		 * PAT MSR. This case supports "nopat" boot option, and
+		 * virtual machine environments which support PAT without
+		 * MTRRs. In specific, Xen has unique setup to PAT MSR.
+		 *
+		 * If PAT MSR returns 0, it is considered invalid and emulates
+		 * as No PAT.
+		 */
+		rdmsrl(MSR_IA32_CR_PAT, pat);
+	}
+
+	if (!pat) {
 		/*
 		 * No PAT. Emulate the PAT table that corresponds to the two
-		 * cache bits, PWT (Write Through) and PCD (Cache Disable). This
-		 * setup is the same as the BIOS default setup when the system
-		 * has PAT but the "nopat" boot option has been specified. This
-		 * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+		 * cache bits, PWT (Write Through) and PCD (Cache Disable).
+		 * This setup is also the same as the BIOS default setup.
 		 *
 		 * PTE encoding:
 		 *
@@ -266,10 +273,36 @@ void pat_init(void)
 		 */
 		pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
 		      PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+	}
+
+	__init_cache_modes(pat);
+
+	init_cm_done = 1;
+}
+
+/**
+ * pat_init - Initialize PAT MSR and PAT table
+ *
+ * This function initializes PAT MSR and PAT table with an OS-defined value
+ * to enable additional cache attributes, WC and WT.
+ *
+ * This function must be called on all CPUs using the specific sequence of
+ * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this
+ * procedure for PAT.
+ */
+void pat_init(void)
+{
+	u64 pat;
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	if (!pat_enabled()) {
+		init_cache_modes();
+		return;
+	}
 
-	} else if ((c->x86_vendor == X86_VENDOR_INTEL) &&
-		   (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
-		    ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
+	if ((c->x86_vendor == X86_VENDOR_INTEL) &&
+	    (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
+	     ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
 		/*
 		 * PAT support with the lower four entries. Intel Pentium 2,
 		 * 3, M, and 4 are affected by PAT errata, which makes the
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1623,7 +1623,7 @@ asmlinkage __visible void __init xen_sta
 	 * configuration.
 	 */
 	rdmsrl(MSR_IA32_CR_PAT, pat);
-	pat_init_cache_modes(pat);
+	__init_cache_modes(pat);
 
 	/* keep using Xen gdt for now; no urgent need to change it */
 



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 24/56] x86/mm/pat: Add pat_disable() interface

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 224bb1e5d67ba0f2872c98002d6a6f991ac6fd4a upstream.

In preparation for fixing a regression caused by:

  9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")

... PAT needs to provide an interface that prevents the OS from
initializing the PAT MSR.

PAT MSR initialization must be done on all CPUs using the specific
sequence of operations defined in the Intel SDM.  This requires MTRRs
to be enabled since pat_init() is called as part of MTRR init
from mtrr_rendezvous_handler().

Make pat_disable() as the interface that prevents the OS from
initializing the PAT MSR.  MTRR will call this interface when it
cannot provide the SDM-defined sequence to initialize PAT.

This also assures that pat_disable() called from pat_bsp_init()
will set the PAT table properly when CPU does not support PAT.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-3-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pat.h |    1 +
 arch/x86/mm/pat.c          |   13 ++++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -5,6 +5,7 @@
 #include <asm/pgtable_types.h>
 
 bool pat_enabled(void);
+void pat_disable(const char *reason);
 extern void pat_init(void);
 void __init_cache_modes(u64);
 
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -40,11 +40,22 @@
 static bool boot_cpu_done;
 
 static int __read_mostly __pat_enabled = IS_ENABLED(CONFIG_X86_PAT);
+static void init_cache_modes(void);
 
-static inline void pat_disable(const char *reason)
+void pat_disable(const char *reason)
 {
+	if (!__pat_enabled)
+		return;
+
+	if (boot_cpu_done) {
+		WARN_ONCE(1, "x86/PAT: PAT cannot be disabled after initialization\n");
+		return;
+	}
+
 	__pat_enabled = 0;
 	pr_info("x86/PAT: %s\n", reason);
+
+	init_cache_modes();
 }
 
 static int __init nopat(char *str)



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 25/56] x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit d63dcf49cf5ae5605f4d14229e3888e104f294b1 upstream.

Borislav Petkov suggested:

 > Please use on init paths boot_cpu_has(X86_FEATURE_PAT) and on fast
 > paths static_cpu_has(X86_FEATURE_PAT). No more of that cpu_has_XXX
 > ugliness.

Replace the use of cpu_has_pat on init paths with boot_cpu_has().

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-4-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pat.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -213,7 +213,7 @@ static void pat_bsp_init(u64 pat)
 {
 	u64 tmp_pat;
 
-	if (!cpu_has_pat) {
+	if (!boot_cpu_has(X86_FEATURE_PAT)) {
 		pat_disable("PAT not supported by CPU.");
 		return;
 	}
@@ -231,7 +231,7 @@ static void pat_bsp_init(u64 pat)
 
 static void pat_ap_init(u64 pat)
 {
-	if (!cpu_has_pat) {
+	if (!boot_cpu_has(X86_FEATURE_PAT)) {
 		/*
 		 * If this happens we are on a secondary CPU, but switched to
 		 * PAT on the boot CPU. We have no way to undo PAT.



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 26/56] x86/mtrr: Fix Xorg crashes in Qemu sessions

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit edfe63ec97ed8d4496225f7ba54c9ce4207c5431 upstream.

A Xorg failure on qemu32 was reported as a regression [1] caused by
commit 9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled").

This patch fixes the Xorg crash.

Negative effects of this regression were the following two failures [2]
in Xorg on QEMU with QEMU CPU model "qemu32" (-cpu qemu32), which were
triggered by the fact that its virtual CPU does not support MTRRs.

 #1. copy_process() failed in the check in reserve_pfn_range()

    copy_process
     copy_mm
      dup_mm
       dup_mmap
        copy_page_range
         track_pfn_copy
          reserve_pfn_range

 A WC map request was tracked as WC in memtype, which set a PTE as
 UC (pgprot) per __cachemode2pte_tbl[].  This led to this error in
 reserve_pfn_range() called from track_pfn_copy(), which obtained
 a pgprot from a PTE.  It converts pgprot to page_cache_mode, which
 does not necessarily result in the original page_cache_mode since
 __cachemode2pte_tbl[] redirects multiple types to UC.

 #2. error path in copy_process() then hit WARN_ON_ONCE in
     untrack_pfn().

     x86/PAT: Xorg:509 map pfn expected mapping type uncached-
     minus for [mem 0xfd000000-0xfdffffff], got write-combining
      Call Trace:
     dump_stack
     warn_slowpath_common
     ? untrack_pfn
     ? untrack_pfn
     warn_slowpath_null
     untrack_pfn
     ? __kunmap_atomic
     unmap_single_vma
     ? pagevec_move_tail_fn
     unmap_vmas
     exit_mmap
     mmput
     copy_process.part.47
     _do_fork
     SyS_clone
     do_syscall_32_irqs_on
     entry_INT80_32

These negative effects are caused by two separate bugs, but they
can be addressed in separate patches.  Fixing the pat_init() issue
described below addresses the root cause, and avoids Xorg to hit
these cases.

When the CPU does not support MTRRs, MTRR does not call pat_init(),
which leaves PAT enabled without initializing PAT.  This pat_init()
issue is a long-standing issue, but manifested as issue #1 (and then
hit issue #2) with the above-mentioned commit because the memtype
now tracks cache attribute with 'page_cache_mode'.

This pat_init() issue existed before the commit, but we used pgprot
in memtype.  Hence, we did not have issue #1 before.  But WC request
resulted in WT in effect because WC pgrot is actually WT when PAT
is not initialized.  This is not how it was designed to work.  When
PAT is set to disable properly, WC is converted to UC.  The use of
WT can result in a system crash if the target range does not support
WT.  Fortunately, nobody ran into such issue before.

To fix this pat_init() issue, PAT code has been enhanced to provide
pat_disable() interface.  Call this interface when MTRRs are disabled.
By setting PAT to disable properly, PAT bypasses the memtype check,
and avoids issue #1.

  [1]: https://lkml.org/lkml/2016/3/3/828
  [2]: https://lkml.org/lkml/2016/3/4/775

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-5-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/mtrr.h     |    6 +++++-
 arch/x86/kernel/cpu/mtrr/main.c |   10 +++++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -24,6 +24,7 @@
 #define _ASM_X86_MTRR_H
 
 #include <uapi/asm/mtrr.h>
+#include <asm/pat.h>
 
 
 /*
@@ -83,9 +84,12 @@ static inline int mtrr_trim_uncached_mem
 static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
 {
 }
+static inline void mtrr_bp_init(void)
+{
+	pat_disable("MTRRs disabled, skipping PAT initialization too.");
+}
 
 #define mtrr_ap_init() do {} while (0)
-#define mtrr_bp_init() do {} while (0)
 #define set_mtrr_aps_delayed_init() do {} while (0)
 #define mtrr_aps_init() do {} while (0)
 #define mtrr_bp_restore() do {} while (0)
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -759,8 +759,16 @@ void __init mtrr_bp_init(void)
 		}
 	}
 
-	if (!mtrr_enabled())
+	if (!mtrr_enabled()) {
 		pr_info("MTRR: Disabled\n");
+
+		/*
+		 * PAT initialization relies on MTRR's rendezvous handler.
+		 * Skip PAT init until the handler can initialize both
+		 * features independently.
+		 */
+		pat_disable("MTRRs disabled, skipping PAT initialization too.");
+	}
 }
 
 void mtrr_ap_init(void)



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 27/56] x86/mtrr: Fix PAT init handling when MTRR is disabled

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit ad025a73f0e9344ac73ffe1b74c184033e08e7d5 upstream.

get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled.
This results in calling pat_init() on BSP only since APs do not call
pat_init() when MTRR is disabled.  This inconsistency between BSP
and APs leads to undefined behavior.

Make BSP's calling condition to pat_init() consistent with AP's,
mtrr_ap_init() and mtrr_aps_init().

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mtrr/generic.c |   24 ++++++++++++++----------
 arch/x86/kernel/cpu/mtrr/main.c    |    3 +++
 arch/x86/kernel/cpu/mtrr/mtrr.h    |    1 +
 3 files changed, 18 insertions(+), 10 deletions(-)

--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -444,11 +444,24 @@ static void __init print_mtrr_state(void
 		pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
 }
 
+/* PAT setup for BP. We need to go through sync steps here */
+void __init mtrr_bp_pat_init(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	prepare_set();
+
+	pat_init();
+
+	post_set();
+	local_irq_restore(flags);
+}
+
 /* Grab all of the MTRR state for this CPU into *state */
 bool __init get_mtrr_state(void)
 {
 	struct mtrr_var_range *vrs;
-	unsigned long flags;
 	unsigned lo, dummy;
 	unsigned int i;
 
@@ -481,15 +494,6 @@ bool __init get_mtrr_state(void)
 
 	mtrr_state_set = 1;
 
-	/* PAT setup for BP. We need to go through sync steps here */
-	local_irq_save(flags);
-	prepare_set();
-
-	pat_init();
-
-	post_set();
-	local_irq_restore(flags);
-
 	return !!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED);
 }
 
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -752,6 +752,9 @@ void __init mtrr_bp_init(void)
 			/* BIOS may override */
 			__mtrr_enabled = get_mtrr_state();
 
+			if (mtrr_enabled())
+				mtrr_bp_pat_init();
+
 			if (mtrr_cleanup(phys_addr)) {
 				changed_by_mtrr_cleanup = 1;
 				mtrr_if->set_all();
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -52,6 +52,7 @@ void set_mtrr_prepare_save(struct set_mt
 void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 bool get_mtrr_state(void);
+void mtrr_bp_pat_init(void);
 
 extern void set_mtrr_ops(const struct mtrr_ops *ops);
 



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 28/56] x86/xen, pat: Remove PAT table init code from Xen

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 88ba281108ed0c25c9d292b48bd3f272fcb90dd0 upstream.

Xen supports PAT without MTRRs for its guests.  In order to
enable WC attribute, it was necessary for xen_start_kernel()
to call pat_init_cache_modes() to update PAT table before
starting guest kernel.

Now that the kernel initializes PAT table to the BIOS handoff
state when MTRR is disabled, this Xen-specific PAT init code
is no longer necessary.  Delete it from xen_start_kernel().

Also change __init_cache_modes() to a static function since
PAT table should not be tweaked by other modules.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-7-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pat.h |    1 -
 arch/x86/mm/pat.c          |    2 +-
 arch/x86/xen/enlighten.c   |    9 ---------
 3 files changed, 1 insertion(+), 11 deletions(-)

--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -7,7 +7,6 @@
 bool pat_enabled(void);
 void pat_disable(const char *reason);
 extern void pat_init(void);
-void __init_cache_modes(u64);
 
 extern int reserve_memtype(u64 start, u64 end,
 		enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -192,7 +192,7 @@ static enum page_cache_mode pat_get_cach
  * configuration.
  * Using lower indices is preferred, so we start with highest index.
  */
-void __init_cache_modes(u64 pat)
+static void __init_cache_modes(u64 pat)
 {
 	enum page_cache_mode cache;
 	char pat_msg[33];
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,7 +75,6 @@
 #include <asm/mach_traps.h>
 #include <asm/mwait.h>
 #include <asm/pci_x86.h>
-#include <asm/pat.h>
 #include <asm/cpu.h>
 
 #ifdef CONFIG_ACPI
@@ -1511,7 +1510,6 @@ asmlinkage __visible void __init xen_sta
 {
 	struct physdev_set_iopl set_iopl;
 	unsigned long initrd_start = 0;
-	u64 pat;
 	int rc;
 
 	if (!xen_start_info)
@@ -1618,13 +1616,6 @@ asmlinkage __visible void __init xen_sta
 				   xen_start_info->nr_pages);
 	xen_reserve_special_pages();
 
-	/*
-	 * Modify the cache mode translation tables to match Xen's PAT
-	 * configuration.
-	 */
-	rdmsrl(MSR_IA32_CR_PAT, pat);
-	__init_cache_modes(pat);
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 29/56] x86/pat: Document the PAT initialization sequence

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit b6350c21cfe8aa9d65e189509a23c0ea4b8362c2 upstream.

Update PAT documentation to describe how PAT is initialized under
various configurations.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-8-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/x86/pat.txt |   32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

--- a/Documentation/x86/pat.txt
+++ b/Documentation/x86/pat.txt
@@ -196,3 +196,35 @@ Another, more verbose way of getting PAT
 "debugpat" boot parameter. With this parameter, various debug messages are
 printed to dmesg log.
 
+PAT Initialization
+------------------
+
+The following table describes how PAT is initialized under various
+configurations. The PAT MSR must be updated by Linux in order to support WC
+and WT attributes. Otherwise, the PAT MSR has the value programmed in it
+by the firmware. Note, Xen enables WC attribute in the PAT MSR for guests.
+
+ MTRR PAT   Call Sequence               PAT State  PAT MSR
+ =========================================================
+ E    E     MTRR -> PAT init            Enabled    OS
+ E    D     MTRR -> PAT init            Disabled    -
+ D    E     MTRR -> PAT disable         Disabled   BIOS
+ D    D     MTRR -> PAT disable         Disabled    -
+ -    np/E  PAT  -> PAT disable         Disabled   BIOS
+ -    np/D  PAT  -> PAT disable         Disabled    -
+ E    !P/E  MTRR -> PAT init            Disabled   BIOS
+ D    !P/E  MTRR -> PAT disable         Disabled   BIOS
+ !M   !P/E  MTRR stub -> PAT disable    Disabled   BIOS
+
+ Legend
+ ------------------------------------------------
+ E         Feature enabled in CPU
+ D	   Feature disabled/unsupported in CPU
+ np	   "nopat" boot option specified
+ !P	   CONFIG_X86_PAT option unset
+ !M	   CONFIG_MTRR option unset
+ Enabled   PAT state set to enabled
+ Disabled  PAT state set to disabled
+ OS        PAT initializes PAT MSR with OS setting
+ BIOS      PAT keeps PAT MSR with BIOS setting
+



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH 4.6 30/56] x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 1886297ce0c8d563a08c8a8c4c0b97743e06cd37 upstream.

The following BUG_ON() crash was reported on QEMU/i386:

  kernel BUG at arch/x86/mm/physaddr.c:79!
  Call Trace:
  phys_mem_access_prot_allowed
  mmap_mem
  ? mmap_region
  mmap_region
  do_mmap
  vm_mmap_pgoff
  SyS_mmap_pgoff
  do_int80_syscall_32
  entry_INT80_32

after commit:

  edfe63ec97ed ("x86/mtrr: Fix Xorg crashes in Qemu sessions")

PAT is now set to disabled state when MTRRs are disabled.
Thus, reactivating the __pa(high_memory) check in
phys_mem_access_prot_allowed().

When CONFIG_DEBUG_VIRTUAL is set, __pa() calls __phys_addr(),
which in turn calls slow_virt_to_phys() for 'high_memory'.
Because 'high_memory' is set to (the max direct mapped virt
addr + 1), it is not a valid virtual address.  Hence,
slow_virt_to_phys() returns 0 and hit the BUG_ON.  Using
__pa_nodebug() instead of __pa() will fix this BUG_ON.

However, this code block, originally written for Pentiums and
earlier, is no longer adequate since a 32-bit Xen guest has
MTRRs disabled and supports ZONE_HIGHMEM.  In this setup,
this code sets UC attribute for accessing RAM in high memory
range.

Delete this code block as it has been unused for a long time.

Reported-by: kernel test robot <ying.huang@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1460403360-25441-1-git-send-email-toshi.kani@hpe.com
Link: https://lkml.org/lkml/2016/4/1/608
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pat.c |   19 -------------------
 1 file changed, 19 deletions(-)

--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -778,25 +778,6 @@ int phys_mem_access_prot_allowed(struct
 	if (file->f_flags & O_DSYNC)
 		pcm = _PAGE_CACHE_MODE_UC_MINUS;
 
-#ifdef CONFIG_X86_32
-	/*
-	 * On the PPro and successors, the MTRRs are used to set
-	 * memory types for physical addresses outside main memory,
-	 * so blindly setting UC or PWT on those pages is wrong.
-	 * For Pentiums and earlier, the surround logic should disable
-	 * caching for the high addresses through the KEN pin, but
-	 * we maintain the tradition of paranoia in this code.
-	 */
-	if (!pat_enabled() &&
-	    !(boot_cpu_has(X86_FEATURE_MTRR) ||
-	      boot_cpu_has(X86_FEATURE_K6_MTRR) ||
-	      boot_cpu_has(X86_FEATURE_CYRIX_ARR) ||
-	      boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) &&
-	    (pfn << PAGE_SHIFT) >= __pa(high_memory)) {
-		pcm = _PAGE_CACHE_MODE_UC;
-	}
-#endif
-
 	*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
 			     cachemode2protval(pcm));
 	return 1;



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel