From: Olaf Hering <olaf@aepfle.de>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Olaf Hering <olaf@aepfle.de>,
Stefano Stabellini <sstabellini@kernel.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
Max Reitz <mreitz@redhat.com>,
"open list:X86" <xen-devel@lists.xensource.com>,
Anthony Perard <anthony.perard@citrix.com>
Subject: [PATCH] xen_disk: convert discard input to byte ranges
Date: Fri, 18 Nov 2016 10:24:52 +0000 [thread overview]
Message-ID: <20161118102452.5779-1-olaf@aepfle.de> (raw)
The guest sends discard requests as u64 sector/count pairs, but the
block layer operates internally with s64/s32 pairs. The conversion
leads to IO errors in the guest, the discard request is not processed.
domU.cfg:
'vdev=xvda, format=qcow2, backendtype=qdisk, target=/x.qcow2'
domU:
mkfs.ext4 -F /dev/xvda
Discarding device blocks: failed - Input/output error
Fix this by splitting the request into chunks of BDRV_REQUEST_MAX_SECTORS.
Add input range checking to avoid overflow.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
---
hw/block/xen_disk.c | 45 +++++++++++++++++++++++++++++++++++++++------
1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/hw/block/xen_disk.c b/hw/block/xen_disk.c
index 3a7dc19..c3f572f 100644
--- a/hw/block/xen_disk.c
+++ b/hw/block/xen_disk.c
@@ -660,6 +660,41 @@ static void qemu_aio_complete(void *opaque, int ret)
qemu_bh_schedule(ioreq->blkdev->bh);
}
+static bool blk_split_discard(struct ioreq *ioreq, blkif_sector_t sector_number,
+ uint64_t nr_sectors)
+{
+ struct XenBlkDev *blkdev = ioreq->blkdev;
+ int64_t byte_offset;
+ int byte_chunk;
+ uint64_t sec_start = sector_number;
+ uint64_t sec_count = nr_sectors;
+ uint64_t byte_remaining;
+ uint64_t limit = BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS;
+
+ /* Wrap around? */
+ if ((sec_start + sec_count) < sec_count) {
+ return false;
+ }
+ /* Overflowing byte limit? */
+ if ((sec_start + sec_count) > ((INT64_MAX + INT_MAX) >> BDRV_SECTOR_BITS)) {
+ return false;
+ }
+
+ byte_offset = sec_start << BDRV_SECTOR_BITS;
+ byte_remaining = sec_count << BDRV_SECTOR_BITS;
+
+ do {
+ byte_chunk = byte_remaining > limit ? limit : byte_remaining;
+ ioreq->aio_inflight++;
+ blk_aio_pdiscard(blkdev->blk, byte_offset, byte_chunk,
+ qemu_aio_complete, ioreq);
+ byte_remaining -= byte_chunk;
+ byte_offset += byte_chunk;
+ } while (byte_remaining > 0);
+
+ return true;
+}
+
static int ioreq_runio_qemu_aio(struct ioreq *ioreq)
{
struct XenBlkDev *blkdev = ioreq->blkdev;
@@ -708,12 +743,10 @@ static int ioreq_runio_qemu_aio(struct ioreq *ioreq)
break;
case BLKIF_OP_DISCARD:
{
- struct blkif_request_discard *discard_req = (void *)&ioreq->req;
- ioreq->aio_inflight++;
- blk_aio_pdiscard(blkdev->blk,
- discard_req->sector_number << BDRV_SECTOR_BITS,
- discard_req->nr_sectors << BDRV_SECTOR_BITS,
- qemu_aio_complete, ioreq);
+ struct blkif_request_discard *req = (void *)&ioreq->req;
+ if (!blk_split_discard(ioreq, req->sector_number, req->nr_sectors)) {
+ goto err;
+ }
break;
}
default:
next reply other threads:[~2016-11-18 10:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 10:24 Olaf Hering [this message]
2016-11-18 10:30 ` [PATCH] xen_disk: convert discard input to byte ranges Olaf Hering
2016-11-23 10:49 ` Olaf Hering
2016-11-23 11:02 ` Olaf Hering
2016-11-23 18:51 ` Stefano Stabellini
2016-11-18 13:43 ` [Qemu-devel] " Eric Blake
2016-11-18 14:19 ` Olaf Hering
2016-11-18 14:35 ` Eric Blake
2016-11-18 15:38 ` Kevin Wolf
2016-11-18 16:39 ` Eric Blake
2016-11-18 17:41 ` Olaf Hering
2016-11-18 18:50 ` Eric Blake
2016-11-22 16:12 ` Olaf Hering
2016-11-22 16:32 ` Eric Blake
2016-11-22 17:00 ` Olaf Hering
2016-11-22 17:11 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161118102452.5779-1-olaf@aepfle.de \
--to=olaf@aepfle.de \
--cc=anthony.perard@citrix.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).