From: Sergej Proskurin <proskurin@sec.in.tum.de>
To: xen-devel@lists.xenproject.org
Cc: Sergej Proskurin <proskurin@sec.in.tum.de>,
Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>
Subject: [PATCH v6 01/14] arm/mem_access: Add and cleanup (TCR_|TTBCR_)* defines
Date: Thu, 6 Jul 2017 13:50:04 +0200 [thread overview]
Message-ID: <20170706115017.23072-2-proskurin@sec.in.tum.de> (raw)
In-Reply-To: <20170706115017.23072-1-proskurin@sec.in.tum.de>
This commit adds (TCR_|TTBCR_)* defines to simplify access to the
respective register contents. At the same time, we adjust the macros
TCR_T0SZ and TCR_TG0_* by using the newly introduced TCR_T0SZ_SHIFT and
TCR_TG0_SHIFT instead of the hardcoded values.
Signed-off-by: Sergej Proskurin <proskurin@sec.in.tum.de>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Julien Grall <julien.grall@arm.com>
---
v2: Define TCR_SZ_MASK in a way so that it can be also applied to 32-bit guests
using the long-descriptor translation table format.
Extend the previous commit by further defines allowing a simplified access
to the registers TCR_EL1 and TTBCR.
v3: Replace the hardcoded value 0 in the TCR_T0SZ macro with the newly
introduced TCR_T0SZ_SHIFT. Also, replace the hardcoded value 14 in
the TCR_TG0_* macros with the introduced TCR_TG0_SHIFT.
Comment when to apply the defines TTBCR_PD(0|1), according to ARM
DDI 0487B.a and ARM DDI 0406C.b.
Remove TCR_TB_* defines.
Comment when certain TCR_EL2 register fields can be applied.
v4: Cosmetic changes.
v5: Remove the shift by 0 of the TCR_SZ_MASK as it can be applied to
both TCR_T0SZ and TCR_T1SZ (which reside at different offsets).
Adjust commit message to make clear that we do not only add but also
cleanup some TCR_* defines.
v6: Changed the comment of TCR_SZ_MASK as we falsely referenced a
section instead of a page.
Add Julien Grall's Acked-by.
---
xen/include/asm-arm/processor.h | 69 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 65 insertions(+), 4 deletions(-)
diff --git a/xen/include/asm-arm/processor.h b/xen/include/asm-arm/processor.h
index 855ded1b07..898160ce00 100644
--- a/xen/include/asm-arm/processor.h
+++ b/xen/include/asm-arm/processor.h
@@ -94,6 +94,13 @@
#define TTBCR_N_2KB _AC(0x03,U)
#define TTBCR_N_1KB _AC(0x04,U)
+/*
+ * TTBCR_PD(0|1) can be applied only if LPAE is disabled, i.e., TTBCR.EAE==0
+ * (ARM DDI 0487B.a G6-5203 and ARM DDI 0406C.b B4-1722).
+ */
+#define TTBCR_PD0 (_AC(1,U)<<4)
+#define TTBCR_PD1 (_AC(1,U)<<5)
+
/* SCTLR System Control Register. */
/* HSCTLR is a subset of this. */
#define SCTLR_TE (_AC(1,U)<<30)
@@ -154,7 +161,20 @@
/* TCR: Stage 1 Translation Control */
-#define TCR_T0SZ(x) ((x)<<0)
+#define TCR_T0SZ_SHIFT (0)
+#define TCR_T1SZ_SHIFT (16)
+#define TCR_T0SZ(x) ((x)<<TCR_T0SZ_SHIFT)
+
+/*
+ * According to ARM DDI 0487B.a, TCR_EL1.{T0SZ,T1SZ} (AArch64, page D7-2480)
+ * comprises 6 bits and TTBCR.{T0SZ,T1SZ} (AArch32, page G6-5204) comprises 3
+ * bits following another 3 bits for RES0. Thus, the mask for both registers
+ * should be 0x3f.
+ */
+#define TCR_SZ_MASK (_AC(0x3f,UL))
+
+#define TCR_EPD0 (_AC(0x1,UL)<<7)
+#define TCR_EPD1 (_AC(0x1,UL)<<23)
#define TCR_IRGN0_NC (_AC(0x0,UL)<<8)
#define TCR_IRGN0_WBWA (_AC(0x1,UL)<<8)
@@ -170,9 +190,50 @@
#define TCR_SH0_OS (_AC(0x2,UL)<<12)
#define TCR_SH0_IS (_AC(0x3,UL)<<12)
-#define TCR_TG0_4K (_AC(0x0,UL)<<14)
-#define TCR_TG0_64K (_AC(0x1,UL)<<14)
-#define TCR_TG0_16K (_AC(0x2,UL)<<14)
+/* Note that the fields TCR_EL1.{TG0,TG1} are not available on AArch32. */
+#define TCR_TG0_SHIFT (14)
+#define TCR_TG0_MASK (_AC(0x3,UL)<<TCR_TG0_SHIFT)
+#define TCR_TG0_4K (_AC(0x0,UL)<<TCR_TG0_SHIFT)
+#define TCR_TG0_64K (_AC(0x1,UL)<<TCR_TG0_SHIFT)
+#define TCR_TG0_16K (_AC(0x2,UL)<<TCR_TG0_SHIFT)
+
+/* Note that the field TCR_EL2.TG1 exists only if HCR_EL2.E2H==1. */
+#define TCR_EL1_TG1_SHIFT (30)
+#define TCR_EL1_TG1_MASK (_AC(0x3,UL)<<TCR_EL1_TG1_SHIFT)
+#define TCR_EL1_TG1_16K (_AC(0x1,UL)<<TCR_EL1_TG1_SHIFT)
+#define TCR_EL1_TG1_4K (_AC(0x2,UL)<<TCR_EL1_TG1_SHIFT)
+#define TCR_EL1_TG1_64K (_AC(0x3,UL)<<TCR_EL1_TG1_SHIFT)
+
+/*
+ * Note that the field TCR_EL1.IPS is not available on AArch32. Also, the field
+ * TCR_EL2.IPS exists only if HCR_EL2.E2H==1.
+ */
+#define TCR_EL1_IPS_SHIFT (32)
+#define TCR_EL1_IPS_MASK (_AC(0x7,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_32_BIT (_AC(0x0,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_36_BIT (_AC(0x1,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_40_BIT (_AC(0x2,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_42_BIT (_AC(0x3,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_44_BIT (_AC(0x4,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_48_BIT (_AC(0x5,ULL)<<TCR_EL1_IPS_SHIFT)
+#define TCR_EL1_IPS_52_BIT (_AC(0x6,ULL)<<TCR_EL1_IPS_SHIFT)
+
+/*
+ * The following values correspond to the bit masks represented by
+ * TCR_EL1_IPS_XX_BIT defines.
+ */
+#define TCR_EL1_IPS_32_BIT_VAL (32)
+#define TCR_EL1_IPS_36_BIT_VAL (36)
+#define TCR_EL1_IPS_40_BIT_VAL (40)
+#define TCR_EL1_IPS_42_BIT_VAL (42)
+#define TCR_EL1_IPS_44_BIT_VAL (44)
+#define TCR_EL1_IPS_48_BIT_VAL (48)
+#define TCR_EL1_IPS_52_BIT_VAL (52)
+#define TCR_EL1_IPS_MIN_VAL (25)
+
+/* Note that the fields TCR_EL2.TBI(0|1) exist only if HCR_EL2.E2H==1. */
+#define TCR_EL1_TBI0 (_AC(0x1,ULL)<<37)
+#define TCR_EL1_TBI1 (_AC(0x1,ULL)<<38)
#ifdef CONFIG_ARM_64
--
2.13.2
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-07-06 11:50 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 11:50 [PATCH v6 00/14] arm/mem_access: Walk guest page tables in SW if mem_access is active Sergej Proskurin
2017-07-06 11:50 ` Sergej Proskurin [this message]
2017-07-06 11:50 ` [PATCH v6 02/14] arm/mem_access: Move PAGE_*_* macros to xen/page-defs.h Sergej Proskurin
2017-07-06 12:10 ` Jan Beulich
2017-07-06 14:53 ` Sergej Proskurin
2017-07-06 15:24 ` Jan Beulich
2017-07-06 15:34 ` Sergej Proskurin
2017-07-06 16:20 ` Jan Beulich
2017-07-07 8:27 ` Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 03/14] arm/mem_access: Add defines supporting PTs with varying page sizes Sergej Proskurin
2017-07-17 14:12 ` Julien Grall
2017-07-06 11:50 ` [PATCH v6 04/14] arm/lpae: Introduce lpae_is_page helper Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 05/14] arm/mem_access: Add short-descriptor pte typedefs and macros Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 06/14] arm/mem_access: Introduce GV2M_EXEC permission Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 07/14] arm/mem_access: Introduce BIT_ULL bit operation Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 08/14] arm/mem_access: Introduce GENMASK_ULL " Sergej Proskurin
2017-07-06 12:18 ` Jan Beulich
2017-07-06 14:38 ` Sergej Proskurin
2017-07-06 15:22 ` Jan Beulich
2017-07-06 15:34 ` Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 09/14] arm/guest_access: Move vgic_access_guest_memory to guest_access.h Sergej Proskurin
2017-07-17 15:38 ` Julien Grall
2017-07-18 9:49 ` Sergej Proskurin
2017-07-18 10:43 ` Julien Grall
2017-07-18 11:59 ` Sergej Proskurin
2017-07-18 12:12 ` Julien Grall
2017-07-18 12:20 ` Sergej Proskurin
2017-07-06 11:50 ` [PATCH v6 10/14] arm/guest_access: Rename vgic_access_guest_memory Sergej Proskurin
2017-07-17 15:43 ` Julien Grall
2017-07-18 8:42 ` Sergej Proskurin
2017-07-18 10:28 ` Julien Grall
2017-07-06 11:50 ` [PATCH v6 11/14] arm/mem_access: Add software guest-page-table walk Sergej Proskurin
2017-07-17 15:47 ` Julien Grall
2017-07-06 11:50 ` [PATCH v6 12/14] arm/mem_access: Add long-descriptor based gpt Sergej Proskurin
2017-07-17 16:18 ` Julien Grall
2017-07-06 11:50 ` [PATCH v6 13/14] arm/mem_access: Add short-descriptor " Sergej Proskurin
2017-07-17 16:26 ` Julien Grall
2017-07-06 11:50 ` [PATCH v6 14/14] arm/mem_access: Walk the guest's pt in software Sergej Proskurin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170706115017.23072-2-proskurin@sec.in.tum.de \
--to=proskurin@sec.in.tum.de \
--cc=julien.grall@arm.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).