From: Wei Liu <wei.liu2@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: wei.liu2@citrix.com
Subject: [PATCH v2 19/62] x86/entry: Early PVH boot code
Date: Fri, 12 Jan 2018 11:28:27 +0000 [thread overview]
Message-ID: <20180112112910.16762-20-wei.liu2@citrix.com> (raw)
In-Reply-To: <20180112112910.16762-1-wei.liu2@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
v2:
1. Fix comment.
2. Use cmpb $0.
3. Address comments on pvh-boot.c.
4. Haven't changed the pritnk modifiers to accommodate future changes.
5. Missing a prerequisite patch to relocate pvh_info to make __va work reliably.
[BLOCKER].
---
xen/arch/x86/Makefile | 1 +
xen/arch/x86/boot/head.S | 40 +++++++++++-
xen/arch/x86/boot/x86_64.S | 2 +-
xen/arch/x86/guest/Makefile | 1 +
xen/arch/x86/guest/pvh-boot.c | 119 +++++++++++++++++++++++++++++++++++
xen/arch/x86/setup.c | 18 +++++-
xen/include/asm-x86/guest.h | 34 ++++++++++
xen/include/asm-x86/guest/pvh-boot.h | 57 +++++++++++++++++
8 files changed, 268 insertions(+), 4 deletions(-)
create mode 100644 xen/arch/x86/guest/Makefile
create mode 100644 xen/arch/x86/guest/pvh-boot.c
create mode 100644 xen/include/asm-x86/guest.h
create mode 100644 xen/include/asm-x86/guest/pvh-boot.h
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 01d1178530..ac91e13606 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -1,6 +1,7 @@
subdir-y += acpi
subdir-y += cpu
subdir-y += genapic
+subdir-$(CONFIG_XEN_GUEST) += guest
subdir-$(CONFIG_HVM) += hvm
subdir-y += mm
subdir-$(CONFIG_XENOPROF) += oprofile
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 472255a4b7..4fe5a776b1 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -379,7 +379,39 @@ cs32_switch:
ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY, .long sym_offs(__pvh_start))
__pvh_start:
- ud2a
+ cld
+ cli
+
+ /*
+ * We need one push/pop to determine load address. Use the same
+ * absolute stack address as the native path, for lack of a better
+ * alternative.
+ */
+ mov $0x1000, %esp
+
+ /* Calculate the load base address. */
+ call 1f
+1: pop %esi
+ sub $sym_offs(1b), %esi
+
+ /* Set up stack. */
+ lea STACK_SIZE + sym_esi(cpu0_stack), %esp
+
+ mov %ebx, sym_esi(pvh_start_info_pa)
+
+ /* Prepare gdt and segments */
+ add %esi, sym_esi(gdt_boot_base)
+ lgdt sym_esi(gdt_boot_descr)
+
+ mov $BOOT_DS, %ecx
+ mov %ecx, %ds
+ mov %ecx, %es
+ mov %ecx, %ss
+
+ /* Skip bootloader setup and bios setup, go straight to trampoline */
+ movb $1, sym_esi(pvh_boot)
+ movb $1, sym_esi(skip_realmode)
+ jmp trampoline_setup
#endif /* CONFIG_PVH_GUEST */
@@ -543,12 +575,18 @@ trampoline_setup:
/* Get bottom-most low-memory stack address. */
add $TRAMPOLINE_SPACE,%ecx
+#ifdef CONFIG_PVH_GUEST
+ cmpb $0, sym_fs(pvh_boot)
+ jne 1f
+#endif
+
/* Save the Multiboot info struct (after relocation) for later use. */
push %ecx /* Bottom-most low-memory stack address. */
push %ebx /* Multiboot information address. */
push %eax /* Multiboot magic. */
call reloc
mov %eax,sym_fs(multiboot_ptr)
+1:
/*
* Now trampoline_phys points to the following structure (lowest address
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index 925fd4bb0a..cf47e019f5 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -31,7 +31,7 @@ ENTRY(__high_start)
test %ebx,%ebx
jnz start_secondary
- /* Pass off the Multiboot info structure to C land. */
+ /* Pass off the Multiboot info structure to C land (if applicable). */
mov multiboot_ptr(%rip),%edi
call __start_xen
BUG /* __start_xen() shouldn't return. */
diff --git a/xen/arch/x86/guest/Makefile b/xen/arch/x86/guest/Makefile
new file mode 100644
index 0000000000..a5f1625ab1
--- /dev/null
+++ b/xen/arch/x86/guest/Makefile
@@ -0,0 +1 @@
+obj-bin-$(CONFIG_PVH_GUEST) += pvh-boot.init.o
diff --git a/xen/arch/x86/guest/pvh-boot.c b/xen/arch/x86/guest/pvh-boot.c
new file mode 100644
index 0000000000..186e332657
--- /dev/null
+++ b/xen/arch/x86/guest/pvh-boot.c
@@ -0,0 +1,119 @@
+/******************************************************************************
+ * arch/x86/guest/pvh-boot.c
+ *
+ * PVH boot time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2017 Citrix Systems Ltd.
+ */
+#include <xen/init.h>
+#include <xen/lib.h>
+#include <xen/mm.h>
+
+#include <asm/guest.h>
+
+#include <public/arch-x86/hvm/start_info.h>
+
+/* Initialised in head.S, before .bss is zeroed. */
+bool __initdata pvh_boot;
+uint32_t __initdata pvh_start_info_pa;
+
+static multiboot_info_t __initdata pvh_mbi;
+static module_t __initdata pvh_mbi_mods[8];
+static const char *__initdata pvh_loader = "PVH Directboot";
+
+static void __init convert_pvh_info(void)
+{
+ const struct hvm_start_info *pvh_info = __va(pvh_start_info_pa);
+ const struct hvm_modlist_entry *entry;
+ module_t *mod;
+ unsigned int i;
+
+ ASSERT(pvh_info->magic == XEN_HVM_START_MAGIC_VALUE);
+
+ /*
+ * Turn hvm_start_info into mbi. Luckily all modules are placed under 4GB
+ * boundary on x86.
+ */
+ pvh_mbi.flags = MBI_CMDLINE | MBI_MODULES | MBI_LOADERNAME;
+
+ BUG_ON(pvh_info->cmdline_paddr >> 32);
+ pvh_mbi.cmdline = pvh_info->cmdline_paddr;
+ pvh_mbi.boot_loader_name = __pa(pvh_loader);
+
+ BUG_ON(pvh_info->nr_modules >= ARRAY_SIZE(pvh_mbi_mods));
+ pvh_mbi.mods_count = pvh_info->nr_modules;
+ pvh_mbi.mods_addr = __pa(pvh_mbi_mods);
+
+ mod = pvh_mbi_mods;
+ entry = __va(pvh_info->modlist_paddr);
+ for ( i = 0; i < pvh_info->nr_modules; i++ )
+ {
+ BUG_ON(entry[i].paddr >> 32);
+ BUG_ON(entry[i].cmdline_paddr >> 32);
+
+ mod[i].mod_start = entry[i].paddr;
+ mod[i].mod_end = entry[i].paddr + entry[i].size;
+ mod[i].string = entry[i].cmdline_paddr;
+ }
+}
+
+multiboot_info_t *__init pvh_init(void)
+{
+ convert_pvh_info();
+
+ return &pvh_mbi;
+}
+
+void __init pvh_print_info(void)
+{
+ const struct hvm_start_info *pvh_info = __va(pvh_start_info_pa);
+ const struct hvm_modlist_entry *entry;
+ unsigned int i;
+
+ ASSERT(pvh_info->magic == XEN_HVM_START_MAGIC_VALUE);
+
+ printk("PVH start info: (pa %08x)\n", pvh_start_info_pa);
+ printk(" version: %u\n", pvh_info->version);
+ printk(" flags: %#"PRIx32"\n", pvh_info->flags);
+ printk(" nr_modules: %u\n", pvh_info->nr_modules);
+ printk(" modlist_pa: %016"PRIx64"\n", pvh_info->modlist_paddr);
+ printk(" cmdline_pa: %016"PRIx64"\n", pvh_info->cmdline_paddr);
+ if ( pvh_info->cmdline_paddr )
+ printk(" cmdline: '%s'\n", (char *)__va(pvh_info->cmdline_paddr));
+ printk(" rsdp_pa: %016"PRIx64"\n", pvh_info->rsdp_paddr);
+
+ entry = __va(pvh_info->modlist_paddr);
+ for ( i = 0; i < pvh_info->nr_modules; i++ )
+ {
+ printk(" mod[%u].pa: %016"PRIx64"\n", i, entry[i].paddr);
+ printk(" mod[%u].size: %016"PRIu64"\n", i, entry[i].size);
+ printk(" mod[%u].cmdline_pa: %016"PRIx64"\n",
+ i, entry[i].cmdline_paddr);
+ if ( entry[i].cmdline_paddr )
+ printk(" mod[%1u].cmdline: '%s'\n", i,
+ (char *)__va(entry[i].cmdline_paddr));
+ }
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 65170fe54c..f507d22a2d 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -51,6 +51,7 @@
#include <asm/alternative.h>
#include <asm/mc146818rtc.h>
#include <asm/cpuid.h>
+#include <asm/guest.h>
/* opt_nosmp: If true, secondary processors are ignored. */
static bool __initdata opt_nosmp;
@@ -649,8 +650,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
char *memmap_type = NULL;
char *cmdline, *kextra, *loader;
unsigned int initrdidx, domcr_flags = DOMCRF_s3_integrity;
- multiboot_info_t *mbi = __va(mbi_p);
- module_t *mod = (module_t *)__va(mbi->mods_addr);
+ multiboot_info_t *mbi;
+ module_t *mod;
unsigned long nr_pages, raw_max_page, modules_headroom, *module_map;
int i, j, e820_warn = 0, bytes = 0;
bool acpi_boot_table_init_done = false, relocated = false;
@@ -680,6 +681,16 @@ void __init noreturn __start_xen(unsigned long mbi_p)
/* Full exception support from here on in. */
+ if ( pvh_boot )
+ {
+ ASSERT(mbi_p == 0);
+ mbi = pvh_init();
+ }
+ else
+ mbi = __va(mbi_p);
+
+ mod = __va(mbi->mods_addr);
+
loader = (mbi->flags & MBI_LOADERNAME)
? (char *)__va(mbi->boot_loader_name) : "unknown";
@@ -719,6 +730,9 @@ void __init noreturn __start_xen(unsigned long mbi_p)
ehci_dbgp_init();
console_init_preirq();
+ if ( pvh_boot )
+ pvh_print_info();
+
printk("Bootloader: %s\n", loader);
printk("Command line: %s\n", cmdline);
diff --git a/xen/include/asm-x86/guest.h b/xen/include/asm-x86/guest.h
new file mode 100644
index 0000000000..630c092c25
--- /dev/null
+++ b/xen/include/asm-x86/guest.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+ * asm-x86/guest.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms and conditions of the GNU General Public
+ * License, version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2017 Citrix Systems Ltd.
+ */
+
+#ifndef __X86_GUEST_H__
+#define __X86_GUEST_H__
+
+#include <asm/guest/pvh-boot.h>
+
+#endif /* __X86_GUEST_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/asm-x86/guest/pvh-boot.h b/xen/include/asm-x86/guest/pvh-boot.h
new file mode 100644
index 0000000000..1b429f9401
--- /dev/null
+++ b/xen/include/asm-x86/guest/pvh-boot.h
@@ -0,0 +1,57 @@
+/******************************************************************************
+ * asm-x86/guest/pvh-boot.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms and conditions of the GNU General Public
+ * License, version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2017 Citrix Systems Ltd.
+ */
+
+#ifndef __X86_PVH_BOOT_H__
+#define __X86_PVH_BOOT_H__
+
+#include <xen/multiboot.h>
+
+#ifdef CONFIG_PVH_GUEST
+
+extern bool pvh_boot;
+
+multiboot_info_t *pvh_init(void);
+void pvh_print_info(void);
+
+#else
+
+#define pvh_boot 0
+
+static inline multiboot_info_t *pvh_init(void)
+{
+ ASSERT_UNREACHABLE();
+ return NULL;
+}
+
+static inline void pvh_print_info(void)
+{
+ ASSERT_UNREACHABLE();
+}
+
+#endif /* CONFIG_PVH_GUEST */
+#endif /* __X86_PVH_BOOT_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-01-12 11:59 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 11:28 [PATCH v2 00/62] Comet: Run PV in PVH container Wei Liu
2018-01-12 11:28 ` [PATCH v2 01/62] x86/svm: Offer CPUID Faulting to AMD HVM guests as well Wei Liu
2018-01-12 11:28 ` [PATCH v2 02/62] xen/x86: report domain id on cpuid Wei Liu
2018-01-12 11:28 ` [PATCH v2 03/62] tools/libxc: remove extraneous newline in xc_dom_load_acpi Wei Liu
2018-01-12 11:28 ` [PATCH v2 04/62] tools/libelf: fix elf notes check for PVH guest Wei Liu
2018-01-12 11:28 ` [PATCH v2 05/62] tools/libxc: Multi modules support Wei Liu
2018-01-12 11:28 ` [PATCH v2 06/62] xen/common: Widen the guest logging buffer slightly Wei Liu
2018-01-12 11:28 ` [PATCH v2 07/62] x86/time: Print a more helpful error when a platform timer can't be found Wei Liu
2018-01-12 11:28 ` [PATCH v2 08/62] x86/link: Introduce and use SECTION_ALIGN Wei Liu
2018-01-12 11:28 ` [PATCH v2 09/62] ACPICA: Make ACPI Power Management Timer (PM Timer) optional Wei Liu
2018-01-12 11:28 ` [PATCH v2 10/62] xen/domctl: Return arch_config via getdomaininfo Wei Liu
2018-01-12 11:28 ` [PATCH v2 11/62] tools/ocaml: Expose arch_config in domaininfo Wei Liu
2018-01-12 11:28 ` [PATCH v2 12/62] tools/ocaml: Extend domain_create() to take arch_domainconfig Wei Liu
2018-01-12 11:28 ` [PATCH v2 13/62] x86/fixmap: Modify fix_to_virt() to return a void pointer Wei Liu
2018-01-12 11:28 ` [PATCH v2 14/62] x86: Common cpuid faulting support Wei Liu
2018-01-12 11:28 ` [PATCH v2 15/62] x86/Kconfig: Options for Xen and PVH support Wei Liu
2018-01-12 11:28 ` [PATCH v2 16/62] x86/link: Relocate program headers Wei Liu
2018-01-12 11:28 ` [PATCH v2 17/62] x86: introduce ELFNOTE macro Wei Liu
2018-01-12 11:28 ` [PATCH v2 18/62] x86: produce a binary that can be booted as PVH Wei Liu
2018-01-12 11:28 ` Wei Liu [this message]
2018-01-12 11:28 ` [PATCH v2 20/62] x86/boot: Map more than the first 16MB Wei Liu
2018-01-12 11:28 ` [PATCH v2 21/62] x86/entry: Probe for Xen early during boot Wei Liu
2018-01-12 11:28 ` [PATCH v2 22/62] x86/guest: Hypercall support Wei Liu
2018-01-12 11:28 ` [PATCH v2 23/62] x86/shutdown: Support for using SCHEDOP_{shutdown, reboot} Wei Liu
2018-01-12 11:28 ` [PATCH v2 24/62] x86/pvh: Retrieve memory map from Xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 25/62] xen/console: Introduce console=xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 26/62] xen: introduce rangeset_claim_range Wei Liu
2018-01-12 11:28 ` [PATCH v2 27/62] xen/pvshim: keep track of used PFN ranges Wei Liu
2018-01-12 11:28 ` [PATCH v2 28/62] x86/guest: map shared_info page Wei Liu
2018-01-12 11:28 ` [PATCH v2 29/62] xen/guest: fetch vCPU ID from Xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 30/62] x86/guest: map per-cpu vcpu_info area Wei Liu
2018-01-12 11:28 ` [PATCH v2 31/62] x86: xen pv clock time source Wei Liu
2018-01-12 20:45 ` Joao Martins
2018-01-16 12:22 ` Wei Liu
2018-01-12 11:28 ` [PATCH v2 32/62] x86: APIC timer calibration when running as a guest Wei Liu
2018-01-12 11:28 ` [PATCH v2 33/62] x86: read wallclock from Xen when running in pvh mode Wei Liu
2018-01-12 11:28 ` [PATCH v2 34/62] x86: don't swallow the first command line item in guest mode Wei Liu
2018-01-12 11:28 ` [PATCH v2 35/62] x86/guest: setup event channel upcall vector Wei Liu
2018-01-12 11:28 ` [PATCH v2 36/62] x86/guest: add PV console code Wei Liu
2018-01-12 11:28 ` [PATCH v2 37/62] x86/guest: use PV console for Xen/Dom0 I/O Wei Liu
2018-01-12 11:28 ` [PATCH v2 38/62] x86/shim: Kconfig and command line options Wei Liu
2018-01-12 11:28 ` [PATCH v2 39/62] tools/firmware: Build and install xen-shim Wei Liu
2018-01-12 11:28 ` [PATCH v2 40/62] xen/x86: make VGA support selectable Wei Liu
2018-01-12 11:28 ` [PATCH v2 41/62] xen/pvh: do not mark the low 1MB as IO mem Wei Liu
2018-01-12 11:28 ` [PATCH v2 42/62] sched/null: skip vCPUs on the waitqueue that are blocked Wei Liu
2018-01-12 11:28 ` [PATCH v2 43/62] xen/pvshim: skip Dom0-only domain builder parts Wei Liu
2018-01-12 11:28 ` [PATCH v2 44/62] xen: mark xenstore/console pages as RAM Wei Liu
2018-01-12 11:28 ` [PATCH v2 45/62] xen/pvshim: modify Dom0 builder in order to build a DomU Wei Liu
2018-01-12 11:28 ` [PATCH v2 46/62] xen/pvshim: set correct domid value Wei Liu
2018-01-12 11:28 ` [PATCH v2 47/62] xen/pvshim: forward evtchn ops between L0 Xen and L2 DomU Wei Liu
2018-01-12 11:28 ` [PATCH v2 48/62] xen/pvshim: add grant table operations Wei Liu
2018-01-12 11:28 ` [PATCH v2 49/62] x86/pv-shim: shadow PV console's page for L2 DomU Wei Liu
2018-01-12 11:28 ` [PATCH v2 50/62] xen/pvshim: add migration support Wei Liu
2018-01-12 11:28 ` [PATCH v2 51/62] xen/pvshim: add shim_mem cmdline parameter Wei Liu
2018-01-12 11:29 ` [PATCH v2 52/62] xen/pvshim: set max_pages to the value of tot_pages Wei Liu
2018-01-12 11:29 ` [PATCH v2 53/62] xen/pvshim: support vCPU hotplug Wei Liu
2018-01-12 11:29 ` [PATCH v2 54/62] xen/pvshim: memory hotplug Wei Liu
2018-01-12 11:29 ` [PATCH v2 55/62] xen/shim: modify shim_mem parameter behaviour Wei Liu
2018-01-12 11:29 ` [PATCH v2 56/62] xen/pvshim: use default position for the m2p mappings Wei Liu
2018-01-12 11:29 ` [PATCH v2 57/62] xen/shim: crash instead of reboot in shim mode Wei Liu
2018-01-12 11:29 ` [PATCH v2 58/62] xen/shim: allow DomU to have as many vcpus as available Wei Liu
2018-01-12 11:29 ` [PATCH v2 59/62] libxl: pvshim: Provide first-class config settings to enable shim mode Wei Liu
2018-01-12 14:45 ` [PATCH] fixup! " Ian Jackson
2018-01-12 11:29 ` [PATCH v2 60/62] libxl: pvshim: Introduce pvshim_extra Wei Liu
2018-01-12 11:29 ` [PATCH v2 61/62] xl: pvshim: Provide and document xl config Wei Liu
2018-01-12 11:29 ` [PATCH v2 62/62] xl: Default guest mode changed from PV to PVH with PV shim Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112112910.16762-20-wei.liu2@citrix.com \
--to=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).