From: Wei Liu <wei.liu2@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: wei.liu2@citrix.com
Subject: [PATCH v2 45/62] xen/pvshim: modify Dom0 builder in order to build a DomU
Date: Fri, 12 Jan 2018 11:28:53 +0000 [thread overview]
Message-ID: <20180112112910.16762-46-wei.liu2@citrix.com> (raw)
In-Reply-To: <20180112112910.16762-1-wei.liu2@citrix.com>
From: Roger Pau Monne <roger.pau@citrix.com>
According to the PV ABI the initial virtual memory regions should
contain the xenstore and console pages after the start_info. Also set
the correct values in the start_info for DomU operation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
---
Changes since v1:
- Modify the position of the __init attribute in dom0_update_physmap.
- Move the addition of sizeof(struct dom0_vga_console_info) to
vstartinfo_end with an existing if branch.
- Add a TODO item for fill_console_start_info in the !CONFIG_VIDEO
case.
- s/replace_va/replace_va_mapping/.
- Remove call to free_domheap_pages in replace_va_mapping.
put_page_and_type should already take care of freeing the page.
- Use PFN_DOWN in SET_AND_MAP_PARAM macro.
- Parenthesize va in SET_AND_MAP_PARAM macro when required.
---
xen/arch/x86/pv/dom0_build.c | 48 +++++++++++++++++++++++-------
xen/arch/x86/pv/shim.c | 63 ++++++++++++++++++++++++++++++++++++++++
xen/include/asm-x86/dom0_build.h | 4 +++
xen/include/asm-x86/pv/shim.h | 21 ++++++++++++++
4 files changed, 126 insertions(+), 10 deletions(-)
diff --git a/xen/arch/x86/pv/dom0_build.c b/xen/arch/x86/pv/dom0_build.c
index 6118970d44..52576795cc 100644
--- a/xen/arch/x86/pv/dom0_build.c
+++ b/xen/arch/x86/pv/dom0_build.c
@@ -31,9 +31,8 @@
#define L3_PROT (BASE_PROT|_PAGE_DIRTY)
#define L4_PROT (BASE_PROT|_PAGE_DIRTY)
-static __init void dom0_update_physmap(struct domain *d, unsigned long pfn,
- unsigned long mfn,
- unsigned long vphysmap_s)
+void __init dom0_update_physmap(struct domain *d, unsigned long pfn,
+ unsigned long mfn, unsigned long vphysmap_s)
{
if ( !is_pv_32bit_domain(d) )
((unsigned long *)vphysmap_s)[pfn] = mfn;
@@ -315,6 +314,10 @@ int __init dom0_construct_pv(struct domain *d,
unsigned long vphysmap_end;
unsigned long vstartinfo_start;
unsigned long vstartinfo_end;
+ unsigned long vxenstore_start = 0;
+ unsigned long vxenstore_end = 0;
+ unsigned long vconsole_start = 0;
+ unsigned long vconsole_end = 0;
unsigned long vstack_start;
unsigned long vstack_end;
unsigned long vpt_start;
@@ -440,11 +443,22 @@ int __init dom0_construct_pv(struct domain *d,
if ( parms.p2m_base != UNSET_ADDR )
vphysmap_end = vphysmap_start;
vstartinfo_start = round_pgup(vphysmap_end);
- vstartinfo_end = (vstartinfo_start +
- sizeof(struct start_info) +
- sizeof(struct dom0_vga_console_info));
+ vstartinfo_end = vstartinfo_start + sizeof(struct start_info);
+
+ if ( pv_shim )
+ {
+ vxenstore_start = round_pgup(vstartinfo_end);
+ vxenstore_end = vxenstore_start + PAGE_SIZE;
+ vconsole_start = vxenstore_end;
+ vconsole_end = vconsole_start + PAGE_SIZE;
+ vpt_start = vconsole_end;
+ }
+ else
+ {
+ vpt_start = round_pgup(vstartinfo_end);
+ vstartinfo_end += sizeof(struct dom0_vga_console_info);
+ }
- vpt_start = round_pgup(vstartinfo_end);
for ( nr_pt_pages = 2; ; nr_pt_pages++ )
{
vpt_end = vpt_start + (nr_pt_pages * PAGE_SIZE);
@@ -537,6 +551,8 @@ int __init dom0_construct_pv(struct domain *d,
" Init. ramdisk: %p->%p\n"
" Phys-Mach map: %p->%p\n"
" Start info: %p->%p\n"
+ " Xenstore ring: %p->%p\n"
+ " Console ring: %p->%p\n"
" Page tables: %p->%p\n"
" Boot stack: %p->%p\n"
" TOTAL: %p->%p\n",
@@ -544,6 +560,8 @@ int __init dom0_construct_pv(struct domain *d,
_p(vinitrd_start), _p(vinitrd_end),
_p(vphysmap_start), _p(vphysmap_end),
_p(vstartinfo_start), _p(vstartinfo_end),
+ _p(vxenstore_start), _p(vxenstore_end),
+ _p(vconsole_start), _p(vconsole_end),
_p(vpt_start), _p(vpt_end),
_p(vstack_start), _p(vstack_end),
_p(v_start), _p(v_end));
@@ -737,7 +755,8 @@ int __init dom0_construct_pv(struct domain *d,
si->shared_info = virt_to_maddr(d->shared_info);
- si->flags = SIF_PRIVILEGED | SIF_INITDOMAIN;
+ if ( !pv_shim )
+ si->flags = SIF_PRIVILEGED | SIF_INITDOMAIN;
if ( !vinitrd_start && initrd_len )
si->flags |= SIF_MOD_START_PFN;
si->flags |= (xen_processor_pmbits << 8) & SIF_PM_MASK;
@@ -829,15 +848,24 @@ int __init dom0_construct_pv(struct domain *d,
strlcpy((char *)si->cmd_line, cmdline, sizeof(si->cmd_line));
#ifdef CONFIG_VIDEO
- if ( fill_console_start_info((void *)(si + 1)) )
+ if ( !pv_shim && fill_console_start_info((void *)(si + 1)) )
{
si->console.dom0.info_off = sizeof(struct start_info);
si->console.dom0.info_size = sizeof(struct dom0_vga_console_info);
}
#endif
+ /*
+ * TODO: provide an empty stub for fill_console_start_info in the
+ * !CONFIG_VIDEO case so the logic here can be simplified.
+ */
+ if ( pv_shim )
+ pv_shim_setup_dom(d, l4start, v_start, vxenstore_start, vconsole_start,
+ vphysmap_start, si);
+
if ( is_pv_32bit_domain(d) )
- xlat_start_info(si, XLAT_start_info_console_dom0);
+ xlat_start_info(si, pv_shim ? XLAT_start_info_console_domU
+ : XLAT_start_info_console_dom0);
/* Return to idle domain's page tables. */
mapcache_override_current(NULL);
diff --git a/xen/arch/x86/pv/shim.c b/xen/arch/x86/pv/shim.c
index 4d037355db..75365b0697 100644
--- a/xen/arch/x86/pv/shim.c
+++ b/xen/arch/x86/pv/shim.c
@@ -18,16 +18,79 @@
*
* Copyright (c) 2017 Citrix Systems Ltd.
*/
+#include <xen/hypercall.h>
#include <xen/init.h>
#include <xen/types.h>
#include <asm/apic.h>
+#include <asm/dom0_build.h>
+#include <asm/guest.h>
+#include <asm/pv/mm.h>
#ifndef CONFIG_PV_SHIM_EXCLUSIVE
bool pv_shim;
boolean_param("pv-shim", pv_shim);
#endif
+#define L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_USER| \
+ _PAGE_GUEST_KERNEL)
+#define COMPAT_L1_PROT (_PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED)
+
+static void __init replace_va_mapping(struct domain *d, l4_pgentry_t *l4start,
+ unsigned long va, unsigned long mfn)
+{
+ struct page_info *page;
+ l4_pgentry_t *pl4e;
+ l3_pgentry_t *pl3e;
+ l2_pgentry_t *pl2e;
+ l1_pgentry_t *pl1e;
+
+ pl4e = l4start + l4_table_offset(va);
+ pl3e = l4e_to_l3e(*pl4e);
+ pl3e += l3_table_offset(va);
+ pl2e = l3e_to_l2e(*pl3e);
+ pl2e += l2_table_offset(va);
+ pl1e = l2e_to_l1e(*pl2e);
+ pl1e += l1_table_offset(va);
+
+ page = mfn_to_page(l1e_get_pfn(*pl1e));
+ put_page_and_type(page);
+
+ *pl1e = l1e_from_pfn(mfn, (!is_pv_32bit_domain(d) ? L1_PROT
+ : COMPAT_L1_PROT));
+}
+
+void __init pv_shim_setup_dom(struct domain *d, l4_pgentry_t *l4start,
+ unsigned long va_start, unsigned long store_va,
+ unsigned long console_va, unsigned long vphysmap,
+ start_info_t *si)
+{
+ uint64_t param = 0;
+ long rc;
+
+#define SET_AND_MAP_PARAM(p, si, va) ({ \
+ rc = xen_hypercall_hvm_get_param(p, ¶m); \
+ if ( rc ) \
+ panic("Unable to get " #p "\n"); \
+ (si) = param; \
+ if ( va ) \
+ { \
+ share_xen_page_with_guest(mfn_to_page(param), d, XENSHARE_writable); \
+ replace_va_mapping(d, l4start, va, param); \
+ dom0_update_physmap(d, PFN_DOWN((va) - va_start), param, vphysmap); \
+ } \
+})
+ SET_AND_MAP_PARAM(HVM_PARAM_STORE_PFN, si->store_mfn, store_va);
+ SET_AND_MAP_PARAM(HVM_PARAM_STORE_EVTCHN, si->store_evtchn, 0);
+ if ( !pv_console )
+ {
+ SET_AND_MAP_PARAM(HVM_PARAM_CONSOLE_PFN, si->console.domU.mfn,
+ console_va);
+ SET_AND_MAP_PARAM(HVM_PARAM_CONSOLE_EVTCHN, si->console.domU.evtchn, 0);
+ }
+#undef SET_AND_MAP_PARAM
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/include/asm-x86/dom0_build.h b/xen/include/asm-x86/dom0_build.h
index 25d124f8d4..33a5483739 100644
--- a/xen/include/asm-x86/dom0_build.h
+++ b/xen/include/asm-x86/dom0_build.h
@@ -1,6 +1,7 @@
#ifndef _DOM0_BUILD_H_
#define _DOM0_BUILD_H_
+#include <xen/libelf.h>
#include <xen/sched.h>
#include <asm/setup.h>
@@ -27,6 +28,9 @@ int dom0_construct_pvh(struct domain *d, const module_t *image,
unsigned long dom0_paging_pages(const struct domain *d,
unsigned long nr_pages);
+void dom0_update_physmap(struct domain *d, unsigned long pfn,
+ unsigned long mfn, unsigned long vphysmap_s);
+
#endif /* _DOM0_BUILD_H_ */
/*
diff --git a/xen/include/asm-x86/pv/shim.h b/xen/include/asm-x86/pv/shim.h
index 1468cfd498..b0c361cba1 100644
--- a/xen/include/asm-x86/pv/shim.h
+++ b/xen/include/asm-x86/pv/shim.h
@@ -29,6 +29,27 @@ extern bool pv_shim;
# define pv_shim 0
#endif /* CONFIG_PV_SHIM{,_EXCLUSIVE} */
+#ifdef CONFIG_PV_SHIM
+
+void pv_shim_setup_dom(struct domain *d, l4_pgentry_t *l4start,
+ unsigned long va_start, unsigned long store_va,
+ unsigned long console_va, unsigned long vphysmap,
+ start_info_t *si);
+
+#else
+
+static inline void pv_shim_setup_dom(struct domain *d, l4_pgentry_t *l4start,
+ unsigned long va_start,
+ unsigned long store_va,
+ unsigned long console_va,
+ unsigned long vphysmap,
+ start_info_t *si)
+{
+ ASSERT_UNREACHABLE();
+}
+
+#endif
+
#endif /* __X86_PV_SHIM_H__ */
/*
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-01-12 11:58 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 11:28 [PATCH v2 00/62] Comet: Run PV in PVH container Wei Liu
2018-01-12 11:28 ` [PATCH v2 01/62] x86/svm: Offer CPUID Faulting to AMD HVM guests as well Wei Liu
2018-01-12 11:28 ` [PATCH v2 02/62] xen/x86: report domain id on cpuid Wei Liu
2018-01-12 11:28 ` [PATCH v2 03/62] tools/libxc: remove extraneous newline in xc_dom_load_acpi Wei Liu
2018-01-12 11:28 ` [PATCH v2 04/62] tools/libelf: fix elf notes check for PVH guest Wei Liu
2018-01-12 11:28 ` [PATCH v2 05/62] tools/libxc: Multi modules support Wei Liu
2018-01-12 11:28 ` [PATCH v2 06/62] xen/common: Widen the guest logging buffer slightly Wei Liu
2018-01-12 11:28 ` [PATCH v2 07/62] x86/time: Print a more helpful error when a platform timer can't be found Wei Liu
2018-01-12 11:28 ` [PATCH v2 08/62] x86/link: Introduce and use SECTION_ALIGN Wei Liu
2018-01-12 11:28 ` [PATCH v2 09/62] ACPICA: Make ACPI Power Management Timer (PM Timer) optional Wei Liu
2018-01-12 11:28 ` [PATCH v2 10/62] xen/domctl: Return arch_config via getdomaininfo Wei Liu
2018-01-12 11:28 ` [PATCH v2 11/62] tools/ocaml: Expose arch_config in domaininfo Wei Liu
2018-01-12 11:28 ` [PATCH v2 12/62] tools/ocaml: Extend domain_create() to take arch_domainconfig Wei Liu
2018-01-12 11:28 ` [PATCH v2 13/62] x86/fixmap: Modify fix_to_virt() to return a void pointer Wei Liu
2018-01-12 11:28 ` [PATCH v2 14/62] x86: Common cpuid faulting support Wei Liu
2018-01-12 11:28 ` [PATCH v2 15/62] x86/Kconfig: Options for Xen and PVH support Wei Liu
2018-01-12 11:28 ` [PATCH v2 16/62] x86/link: Relocate program headers Wei Liu
2018-01-12 11:28 ` [PATCH v2 17/62] x86: introduce ELFNOTE macro Wei Liu
2018-01-12 11:28 ` [PATCH v2 18/62] x86: produce a binary that can be booted as PVH Wei Liu
2018-01-12 11:28 ` [PATCH v2 19/62] x86/entry: Early PVH boot code Wei Liu
2018-01-12 11:28 ` [PATCH v2 20/62] x86/boot: Map more than the first 16MB Wei Liu
2018-01-12 11:28 ` [PATCH v2 21/62] x86/entry: Probe for Xen early during boot Wei Liu
2018-01-12 11:28 ` [PATCH v2 22/62] x86/guest: Hypercall support Wei Liu
2018-01-12 11:28 ` [PATCH v2 23/62] x86/shutdown: Support for using SCHEDOP_{shutdown, reboot} Wei Liu
2018-01-12 11:28 ` [PATCH v2 24/62] x86/pvh: Retrieve memory map from Xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 25/62] xen/console: Introduce console=xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 26/62] xen: introduce rangeset_claim_range Wei Liu
2018-01-12 11:28 ` [PATCH v2 27/62] xen/pvshim: keep track of used PFN ranges Wei Liu
2018-01-12 11:28 ` [PATCH v2 28/62] x86/guest: map shared_info page Wei Liu
2018-01-12 11:28 ` [PATCH v2 29/62] xen/guest: fetch vCPU ID from Xen Wei Liu
2018-01-12 11:28 ` [PATCH v2 30/62] x86/guest: map per-cpu vcpu_info area Wei Liu
2018-01-12 11:28 ` [PATCH v2 31/62] x86: xen pv clock time source Wei Liu
2018-01-12 20:45 ` Joao Martins
2018-01-16 12:22 ` Wei Liu
2018-01-12 11:28 ` [PATCH v2 32/62] x86: APIC timer calibration when running as a guest Wei Liu
2018-01-12 11:28 ` [PATCH v2 33/62] x86: read wallclock from Xen when running in pvh mode Wei Liu
2018-01-12 11:28 ` [PATCH v2 34/62] x86: don't swallow the first command line item in guest mode Wei Liu
2018-01-12 11:28 ` [PATCH v2 35/62] x86/guest: setup event channel upcall vector Wei Liu
2018-01-12 11:28 ` [PATCH v2 36/62] x86/guest: add PV console code Wei Liu
2018-01-12 11:28 ` [PATCH v2 37/62] x86/guest: use PV console for Xen/Dom0 I/O Wei Liu
2018-01-12 11:28 ` [PATCH v2 38/62] x86/shim: Kconfig and command line options Wei Liu
2018-01-12 11:28 ` [PATCH v2 39/62] tools/firmware: Build and install xen-shim Wei Liu
2018-01-12 11:28 ` [PATCH v2 40/62] xen/x86: make VGA support selectable Wei Liu
2018-01-12 11:28 ` [PATCH v2 41/62] xen/pvh: do not mark the low 1MB as IO mem Wei Liu
2018-01-12 11:28 ` [PATCH v2 42/62] sched/null: skip vCPUs on the waitqueue that are blocked Wei Liu
2018-01-12 11:28 ` [PATCH v2 43/62] xen/pvshim: skip Dom0-only domain builder parts Wei Liu
2018-01-12 11:28 ` [PATCH v2 44/62] xen: mark xenstore/console pages as RAM Wei Liu
2018-01-12 11:28 ` Wei Liu [this message]
2018-01-12 11:28 ` [PATCH v2 46/62] xen/pvshim: set correct domid value Wei Liu
2018-01-12 11:28 ` [PATCH v2 47/62] xen/pvshim: forward evtchn ops between L0 Xen and L2 DomU Wei Liu
2018-01-12 11:28 ` [PATCH v2 48/62] xen/pvshim: add grant table operations Wei Liu
2018-01-12 11:28 ` [PATCH v2 49/62] x86/pv-shim: shadow PV console's page for L2 DomU Wei Liu
2018-01-12 11:28 ` [PATCH v2 50/62] xen/pvshim: add migration support Wei Liu
2018-01-12 11:28 ` [PATCH v2 51/62] xen/pvshim: add shim_mem cmdline parameter Wei Liu
2018-01-12 11:29 ` [PATCH v2 52/62] xen/pvshim: set max_pages to the value of tot_pages Wei Liu
2018-01-12 11:29 ` [PATCH v2 53/62] xen/pvshim: support vCPU hotplug Wei Liu
2018-01-12 11:29 ` [PATCH v2 54/62] xen/pvshim: memory hotplug Wei Liu
2018-01-12 11:29 ` [PATCH v2 55/62] xen/shim: modify shim_mem parameter behaviour Wei Liu
2018-01-12 11:29 ` [PATCH v2 56/62] xen/pvshim: use default position for the m2p mappings Wei Liu
2018-01-12 11:29 ` [PATCH v2 57/62] xen/shim: crash instead of reboot in shim mode Wei Liu
2018-01-12 11:29 ` [PATCH v2 58/62] xen/shim: allow DomU to have as many vcpus as available Wei Liu
2018-01-12 11:29 ` [PATCH v2 59/62] libxl: pvshim: Provide first-class config settings to enable shim mode Wei Liu
2018-01-12 14:45 ` [PATCH] fixup! " Ian Jackson
2018-01-12 11:29 ` [PATCH v2 60/62] libxl: pvshim: Introduce pvshim_extra Wei Liu
2018-01-12 11:29 ` [PATCH v2 61/62] xl: pvshim: Provide and document xl config Wei Liu
2018-01-12 11:29 ` [PATCH v2 62/62] xl: Default guest mode changed from PV to PVH with PV shim Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112112910.16762-46-wei.liu2@citrix.com \
--to=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).