From: Paul Durrant <paul.durrant@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
Wei Liu <wei.liu2@citrix.com>,
George Dunlap <george.dunlap@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>, Tim Deegan <tim@xen.org>,
Julien Grall <julien.grall@arm.com>,
Paul Durrant <paul.durrant@citrix.com>,
Jan Beulich <jbeulich@suse.com>
Subject: [PATCH v5 01/15] iommu: turn need_iommu back into a boolean.
Date: Fri, 3 Aug 2018 18:22:06 +0100 [thread overview]
Message-ID: <20180803172220.1657-2-paul.durrant@citrix.com> (raw)
In-Reply-To: <20180803172220.1657-1-paul.durrant@citrix.com>
As noted in [1] the tri-state nature of need_iommu after commit 3e06b989 is
confusing.
Because arch_iommu_populate_page_table() removes pages from the page list
as it maps them it is actually safe to re-invoke multiple times without
the need for any specific indication it has been called before, so it
is actually safe to simply turn need_iommu back into a boolean with no
change to the population algorithm.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-07/msg01870.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
---
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: George Dunlap <George.Dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tim Deegan <tim@xen.org>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
v5:
- Simpler patch replacing the more significatio reversion of 3e06b989 in
v4.
v4:
- New in v4.
---
xen/drivers/passthrough/device_tree.c | 19 ++++++++-----------
xen/drivers/passthrough/iommu.c | 8 ++++----
xen/drivers/passthrough/x86/iommu.c | 2 --
xen/include/xen/sched.h | 4 ++--
4 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/xen/drivers/passthrough/device_tree.c b/xen/drivers/passthrough/device_tree.c
index 421f003438..671c8db1d0 100644
--- a/xen/drivers/passthrough/device_tree.c
+++ b/xen/drivers/passthrough/device_tree.c
@@ -40,17 +40,14 @@ int iommu_assign_dt_device(struct domain *d, struct dt_device_node *dev)
if ( !list_empty(&dev->domain_list) )
goto fail;
- if ( need_iommu(d) <= 0 )
- {
- /*
- * The hwdom is forced to use IOMMU for protecting assigned
- * device. Therefore the IOMMU data is already set up.
- */
- ASSERT(!is_hardware_domain(d));
- rc = iommu_construct(d);
- if ( rc )
- goto fail;
- }
+ /*
+ * The hwdom is forced to use IOMMU for protecting assigned
+ * device. Therefore the IOMMU data is already set up.
+ */
+ ASSERT(!is_hardware_domain(d) || need_iommu(d));
+ rc = iommu_construct(d);
+ if ( rc )
+ goto fail;
/* The flag field doesn't matter to DT device. */
rc = hd->platform_ops->assign_device(d, 0, dt_to_dev(dev), 0);
diff --git a/xen/drivers/passthrough/iommu.c b/xen/drivers/passthrough/iommu.c
index 70d218f910..49974e5634 100644
--- a/xen/drivers/passthrough/iommu.c
+++ b/xen/drivers/passthrough/iommu.c
@@ -214,14 +214,14 @@ void iommu_teardown(struct domain *d)
{
const struct domain_iommu *hd = dom_iommu(d);
- d->need_iommu = 0;
+ d->need_iommu = false;
hd->platform_ops->teardown(d);
tasklet_schedule(&iommu_pt_cleanup_tasklet);
}
int iommu_construct(struct domain *d)
{
- if ( need_iommu(d) > 0 )
+ if ( need_iommu(d) )
return 0;
if ( !iommu_use_hap_pt(d) )
@@ -233,7 +233,7 @@ int iommu_construct(struct domain *d)
return rc;
}
- d->need_iommu = 1;
+ d->need_iommu = true;
/*
* There may be dirty cache lines when a device is assigned
* and before need_iommu(d) becoming true, this will cause
@@ -493,7 +493,7 @@ static void iommu_dump_p2m_table(unsigned char key)
ops = iommu_get_ops();
for_each_domain(d)
{
- if ( is_hardware_domain(d) || need_iommu(d) <= 0 )
+ if ( is_hardware_domain(d) || !need_iommu(d) )
continue;
if ( iommu_use_hap_pt(d) )
diff --git a/xen/drivers/passthrough/x86/iommu.c b/xen/drivers/passthrough/x86/iommu.c
index 68182afd91..d48d16b51b 100644
--- a/xen/drivers/passthrough/x86/iommu.c
+++ b/xen/drivers/passthrough/x86/iommu.c
@@ -45,8 +45,6 @@ int arch_iommu_populate_page_table(struct domain *d)
struct page_info *page;
int rc = 0, n = 0;
- d->need_iommu = -1;
-
this_cpu(iommu_dont_flush_iotlb) = 1;
spin_lock(&d->page_alloc_lock);
diff --git a/xen/include/xen/sched.h b/xen/include/xen/sched.h
index 851f11ecf7..5b9820e4e1 100644
--- a/xen/include/xen/sched.h
+++ b/xen/include/xen/sched.h
@@ -372,8 +372,8 @@ struct domain
#ifdef CONFIG_HAS_PASSTHROUGH
struct domain_iommu iommu;
- /* Does this guest need iommu mappings (-1 meaning "being set up")? */
- s8 need_iommu;
+ /* Does this guest need iommu mappings? */
+ bool need_iommu;
#endif
/* is node-affinity automatically computed? */
bool auto_node_affinity;
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-08-03 17:22 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 17:22 [PATCH v5 00/15] paravirtual IOMMU interface Paul Durrant
2018-08-03 17:22 ` Paul Durrant [this message]
2018-08-08 13:39 ` [PATCH v5 01/15] iommu: turn need_iommu back into a boolean Jan Beulich
2018-08-08 13:56 ` Paul Durrant
2018-08-03 17:22 ` [PATCH v5 02/15] iommu: introduce the concept of BFN Paul Durrant
2018-08-07 2:38 ` Tian, Kevin
2018-08-07 7:59 ` Paul Durrant
2018-08-07 8:26 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 03/15] iommu: make use of type-safe BFN and MFN in exported functions Paul Durrant
2018-08-07 2:45 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 04/15] iommu: push use of type-safe BFN and MFN into iommu_ops Paul Durrant
2018-08-07 2:49 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 05/15] iommu: don't domain_crash() inside iommu_map/unmap_page() Paul Durrant
2018-08-07 2:55 ` Tian, Kevin
2018-08-07 8:05 ` Paul Durrant
2018-08-07 8:23 ` Jan Beulich
2018-08-03 17:22 ` [PATCH v5 06/15] public / x86: introduce __HYPERCALL_iommu_op Paul Durrant
2018-08-07 3:00 ` Tian, Kevin
2018-08-07 8:10 ` Paul Durrant
2018-08-07 8:25 ` Jan Beulich
2018-08-17 21:10 ` Daniel De Graaf
2018-08-03 17:22 ` [PATCH v5 07/15] iommu: track reserved ranges using a rangeset Paul Durrant
2018-08-07 3:04 ` Tian, Kevin
2018-08-07 8:16 ` Paul Durrant
2018-08-07 8:23 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 08/15] x86: add iommu_op to query reserved ranges Paul Durrant
2018-08-03 17:22 ` [PATCH v5 09/15] vtd: add lookup_page method to iommu_ops Paul Durrant
2018-08-07 3:25 ` Tian, Kevin
2018-08-07 8:21 ` Paul Durrant
2018-08-07 8:29 ` Jan Beulich
2018-08-07 8:32 ` Tian, Kevin
2018-08-07 8:37 ` Paul Durrant
2018-08-07 8:48 ` Tian, Kevin
2018-08-07 8:56 ` Paul Durrant
2018-08-07 9:03 ` Tian, Kevin
2018-08-07 9:07 ` Paul Durrant
2018-08-07 8:31 ` Tian, Kevin
2018-08-07 8:35 ` Paul Durrant
2018-08-07 8:47 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 10/15] mm / iommu: include need_iommu() test in iommu_use_hap_pt() Paul Durrant
2018-08-07 3:32 ` Tian, Kevin
2018-08-03 17:22 ` [PATCH v5 11/15] mm / iommu: split need_iommu() into has_iommu_pt() and sync_iommu_pt() Paul Durrant
2018-08-03 18:18 ` Razvan Cojocaru
2018-08-07 3:41 ` Tian, Kevin
2018-08-07 8:24 ` Paul Durrant
2018-08-03 17:22 ` [PATCH v5 12/15] x86: add iommu_op to enable modification of IOMMU mappings Paul Durrant
2018-08-07 4:08 ` Tian, Kevin
2018-08-07 8:32 ` Paul Durrant
2018-08-07 8:37 ` Tian, Kevin
2018-08-07 8:44 ` Paul Durrant
2018-08-07 9:01 ` Tian, Kevin
2018-08-07 9:12 ` Paul Durrant
2018-08-07 9:19 ` Tian, Kevin
2018-08-07 9:22 ` Paul Durrant
2018-08-03 17:22 ` [PATCH v5 13/15] memory: add get_paged_gfn() as a wrapper Paul Durrant
2018-08-03 17:22 ` [PATCH v5 14/15] x86: add iommu_ops to modify and flush IOMMU mappings Paul Durrant
2018-08-03 17:22 ` [PATCH v5 15/15] x86: extend the map and unmap iommu_ops to support grant references Paul Durrant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180803172220.1657-2-paul.durrant@citrix.com \
--to=paul.durrant@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@eu.citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=sstabellini@kernel.org \
--cc=tim@xen.org \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).