From: Brian Woods <brian.woods@amd.com>
To: xen-devel@lists.xen.org
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
Brian Woods <brian.woods@amd.com>,
Jan Beulich <jbeulich@suse.com>
Subject: [PATCH v2 1/2] x86/spec-ctrl: add AMD SSBD LS_CFG in init print
Date: Thu, 9 Aug 2018 14:42:12 -0500 [thread overview]
Message-ID: <20180809194213.56671-2-brian.woods@amd.com> (raw)
In-Reply-To: <20180809194213.56671-1-brian.woods@amd.com>
Edit the initialization code for AMD's SSBD via the LS_CFG MSR and
enable it to pass the status to the initial spec-ctrl print_details at
boot.
Signed-off-by: Brian Woods <brian.woods@amd.com>
---
xen/arch/x86/cpu/amd.c | 13 ++++++++++---
xen/arch/x86/spec_ctrl.c | 9 +++++++--
xen/include/asm-x86/cpufeatures.h | 1 +
xen/include/asm-x86/spec_ctrl.h | 2 ++
4 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c
index bad5b43628..06c9e9661b 100644
--- a/xen/arch/x86/cpu/amd.c
+++ b/xen/arch/x86/cpu/amd.c
@@ -598,7 +598,7 @@ static void init_amd(struct cpuinfo_x86 *c)
* If the user has explicitly chosen to disable Memory Disambiguation
* to mitigiate Speculative Store Bypass, poke the appropriate MSR.
*/
- if (opt_ssbd) {
+ if (!ssbd_amd_ls_cfg_mask) {
int bit = -1;
switch (c->x86) {
@@ -607,8 +607,15 @@ static void init_amd(struct cpuinfo_x86 *c)
case 0x17: bit = 10; break;
}
- if (bit >= 0 && !rdmsr_safe(MSR_AMD64_LS_CFG, value)) {
- value |= 1ull << bit;
+ if (bit >= 0)
+ ssbd_amd_ls_cfg_mask = 1ull << bit;
+ }
+
+ if (ssbd_amd_ls_cfg_mask && !rdmsr_safe(MSR_AMD64_LS_CFG, value)) {
+ if (!boot_cpu_has(X86_FEATURE_SSBD_AMD_LS_CFG))
+ setup_force_cpu_cap(X86_FEATURE_SSBD_AMD_LS_CFG);
+ if (opt_ssbd) {
+ value |= ssbd_amd_ls_cfg_mask;
wrmsr_safe(MSR_AMD64_LS_CFG, value);
}
}
diff --git a/xen/arch/x86/spec_ctrl.c b/xen/arch/x86/spec_ctrl.c
index 08e6784c4c..62e6519d93 100644
--- a/xen/arch/x86/spec_ctrl.c
+++ b/xen/arch/x86/spec_ctrl.c
@@ -50,6 +50,8 @@ bool __initdata bsp_delay_spec_ctrl;
uint8_t __read_mostly default_xen_spec_ctrl;
uint8_t __read_mostly default_spec_ctrl_flags;
+uint64_t __read_mostly ssbd_amd_ls_cfg_mask = 0ull;
+
static int __init parse_bti(const char *s)
{
const char *ss;
@@ -210,10 +212,11 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)
printk("Speculative mitigation facilities:\n");
/* Hardware features which pertain to speculative mitigations. */
- printk(" Hardware features:%s%s%s%s%s%s%s%s\n",
+ printk(" Hardware features:%s%s%s%s%s%s%s%s%s\n",
(_7d0 & cpufeat_mask(X86_FEATURE_IBRSB)) ? " IBRS/IBPB" : "",
(_7d0 & cpufeat_mask(X86_FEATURE_STIBP)) ? " STIBP" : "",
(_7d0 & cpufeat_mask(X86_FEATURE_SSBD)) ? " SSBD" : "",
+ boot_cpu_has(X86_FEATURE_SSBD_AMD_LS_CFG)? " SSBD" : "",
(e8b & cpufeat_mask(X86_FEATURE_IBPB)) ? " IBPB" : "",
(caps & ARCH_CAPABILITIES_IBRS_ALL) ? " IBRS_ALL" : "",
(caps & ARCH_CAPABILITIES_RDCL_NO) ? " RDCL_NO" : "",
@@ -225,7 +228,7 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)
printk(" Compiled-in support: INDIRECT_THUNK\n");
/* Settings for Xen's protection, irrespective of guests. */
- printk(" Xen settings: BTI-Thunk %s, SPEC_CTRL: %s%s, Other:%s\n",
+ printk(" Xen settings: BTI-Thunk %s, SPEC_CTRL: %s%s%s, Other:%s\n",
thunk == THUNK_NONE ? "N/A" :
thunk == THUNK_RETPOLINE ? "RETPOLINE" :
thunk == THUNK_LFENCE ? "LFENCE" :
@@ -234,6 +237,8 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)
(default_xen_spec_ctrl & SPEC_CTRL_IBRS) ? "IBRS+" : "IBRS-",
!boot_cpu_has(X86_FEATURE_SSBD) ? "" :
(default_xen_spec_ctrl & SPEC_CTRL_SSBD) ? " SSBD+" : " SSBD-",
+ !boot_cpu_has(X86_FEATURE_SSBD_AMD_LS_CFG)? "" :
+ (opt_ssbd && ssbd_amd_ls_cfg_mask) ? " SSBD+" : " SSBD-",
opt_ibpb ? " IBPB" : "");
/*
diff --git a/xen/include/asm-x86/cpufeatures.h b/xen/include/asm-x86/cpufeatures.h
index b90aa2d046..9383d4058b 100644
--- a/xen/include/asm-x86/cpufeatures.h
+++ b/xen/include/asm-x86/cpufeatures.h
@@ -32,3 +32,4 @@ XEN_CPUFEATURE(SC_RSB_PV, (FSCAPINTS+0)*32+18) /* RSB overwrite needed for
XEN_CPUFEATURE(SC_RSB_HVM, (FSCAPINTS+0)*32+19) /* RSB overwrite needed for HVM */
XEN_CPUFEATURE(NO_XPTI, (FSCAPINTS+0)*32+20) /* XPTI mitigation not in use */
XEN_CPUFEATURE(SC_MSR_IDLE, (FSCAPINTS+0)*32+21) /* (SC_MSR_PV || SC_MSR_HVM) && default_xen_spec_ctrl */
+XEN_CPUFEATURE(SSBD_AMD_LS_CFG, (FSCAPINTS+0)*32+22) /* if SSBD support is enabled via LS_CGF MSR on AMD hardware */
diff --git a/xen/include/asm-x86/spec_ctrl.h b/xen/include/asm-x86/spec_ctrl.h
index 5b40afbab0..6aebfa9e4f 100644
--- a/xen/include/asm-x86/spec_ctrl.h
+++ b/xen/include/asm-x86/spec_ctrl.h
@@ -38,6 +38,8 @@ extern uint8_t opt_xpti;
#define OPT_XPTI_DOM0 0x01
#define OPT_XPTI_DOMU 0x02
+extern uint64_t ssbd_amd_ls_cfg_mask;
+
static inline void init_shadow_spec_ctrl_state(void)
{
struct cpu_info *info = get_cpu_info();
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2018-08-09 19:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-09 19:42 [PATCH v2 0/2] SSBD AMD via LS CFG Enablement Brian Woods
2018-08-09 19:42 ` Brian Woods [this message]
2018-08-15 15:38 ` [PATCH v2 1/2] x86/spec-ctrl: add AMD SSBD LS_CFG in init print Jan Beulich
2018-08-09 19:42 ` [PATCH v2 2/2] x86/spec-ctrl: add support for modifying SSBD VIA LS_CFG MSR Brian Woods
2018-08-09 19:49 ` Brian Woods
2018-08-15 16:00 ` Jan Beulich
2018-08-16 20:02 ` Brian Woods
2018-08-17 6:59 ` Jan Beulich
2018-08-17 18:45 ` Brian Woods
2018-08-20 7:32 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180809194213.56671-2-brian.woods@amd.com \
--to=brian.woods@amd.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).