xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: "Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Jan Beulich" <JBeulich@suse.com>,
	"Wei Liu" <wei.liu2@citrix.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Paul Durrant" <paul.durrant@citrix.com>
Subject: [PATCH] amd-iommu: Fix Guest CR3 Table following c/s 3a7947b6901
Date: Fri, 20 Nov 2020 14:19:51 +0000	[thread overview]
Message-ID: <20201120141951.13742-1-andrew.cooper3@citrix.com> (raw)

"amd-iommu: use a bitfield for DTE" renamed iommu_dte_set_guest_cr3()'s gcr3
parameter to gcr3_mfn but ended up with an off-by-PAGE_SIZE error when
extracting bits from the address.

First of all, get_guest_cr3_from_dte() and iommu_dte_set_guest_cr3()
are (almost) getters and setters for the same field, so should live together.

Rename them to dte_{get,set}_gcr3_table() to specifically avoid 'guest_cr3' in
the name.  This field actually points to a table in memory containing an array
of guest CR3 values.  As these functions are used for different logical
indirections, they shouldn't use gfn/mfn terminology for their parameters.
Switch them to use straight uint64_t full addresses.

Fixes: 3a7947b6901 ("amd-iommu: use a bitfield for DTE")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Paul Durrant <paul.durrant@citrix.com>

Rebase over several years worth of changes.

This code is unreachable, so completely untestable, but I think the end result
is better than it was previously.
---
 xen/drivers/passthrough/amd/iommu.h       |  2 --
 xen/drivers/passthrough/amd/iommu_guest.c | 36 +++++++++++++++++++++++++++----
 xen/drivers/passthrough/amd/iommu_map.c   | 21 ------------------
 3 files changed, 32 insertions(+), 27 deletions(-)

diff --git a/xen/drivers/passthrough/amd/iommu.h b/xen/drivers/passthrough/amd/iommu.h
index 28a44ceb85..ad089cb095 100644
--- a/xen/drivers/passthrough/amd/iommu.h
+++ b/xen/drivers/passthrough/amd/iommu.h
@@ -246,8 +246,6 @@ void amd_iommu_set_root_page_table(struct amd_iommu_dte *dte,
 				   uint8_t paging_mode, bool valid);
 void iommu_dte_add_device_entry(struct amd_iommu_dte *dte,
                                 const struct ivrs_mappings *ivrs_dev);
-void iommu_dte_set_guest_cr3(struct amd_iommu_dte *dte, uint16_t dom_id,
-                             uint64_t gcr3_mfn, bool gv, uint8_t glx);
 
 /* send cmd to iommu */
 void amd_iommu_flush_all_pages(struct domain *d);
diff --git a/xen/drivers/passthrough/amd/iommu_guest.c b/xen/drivers/passthrough/amd/iommu_guest.c
index 2a3def9a5d..00c5ccd7b5 100644
--- a/xen/drivers/passthrough/amd/iommu_guest.c
+++ b/xen/drivers/passthrough/amd/iommu_guest.c
@@ -68,11 +68,39 @@ static void guest_iommu_disable(struct guest_iommu *iommu)
     iommu->enabled = 0;
 }
 
-static uint64_t get_guest_cr3_from_dte(struct amd_iommu_dte *dte)
+/*
+ * The Guest CR3 Table is a table written by the guest kernel, pointing at
+ * gCR3 values for PASID transactions to use.  The Device Table Entry points
+ * at a system physical address.
+ *
+ * However, these helpers deliberately use untyped parameters without
+ * reference to gfn/mfn because they are used both for programming the real
+ * IOMMU, and interpreting a guests programming of its vIOMMU.
+ */
+static uint64_t dte_get_gcr3_table(const struct amd_iommu_dte *dte)
 {
     return (((uint64_t)dte->gcr3_trp_51_31 << 31) |
             (dte->gcr3_trp_30_15 << 15) |
-            (dte->gcr3_trp_14_12 << 12)) >> PAGE_SHIFT;
+            (dte->gcr3_trp_14_12 << 12));
+}
+
+static void dte_set_gcr3_table(struct amd_iommu_dte *dte, uint16_t dom_id,
+                               uint64_t addr, bool gv, uint8_t glx)
+{
+#define GCR3_MASK(hi, lo) (((1ul << ((hi) + 1)) - 1) & ~((1ul << (lo)) - 1))
+
+    /* I bit must be set when gcr3 is enabled */
+    dte->i = true;
+
+    dte->gcr3_trp_14_12 = MASK_EXTR(addr, GCR3_MASK(14, 12));
+    dte->gcr3_trp_30_15 = MASK_EXTR(addr, GCR3_MASK(30, 15));
+    dte->gcr3_trp_51_31 = MASK_EXTR(addr, GCR3_MASK(51, 31));
+
+    dte->domain_id = dom_id;
+    dte->glx = glx;
+    dte->gv = gv;
+
+#undef GCR3_MASK
 }
 
 static unsigned int host_domid(struct domain *d, uint64_t g_domid)
@@ -389,7 +417,7 @@ static int do_invalidate_dte(struct domain *d, cmd_entry_t *cmd)
     gdte = &dte_base[gbdf % (PAGE_SIZE / sizeof(struct amd_iommu_dte))];
 
     gdom_id = gdte->domain_id;
-    gcr3_gfn = get_guest_cr3_from_dte(gdte);
+    gcr3_gfn = dte_get_gcr3_table(gdte) >> PAGE_SHIFT;
     glx = gdte->glx;
     gv = gdte->gv;
 
@@ -419,7 +447,7 @@ static int do_invalidate_dte(struct domain *d, cmd_entry_t *cmd)
     mdte = &dte_base[req_id];
 
     spin_lock_irqsave(&iommu->lock, flags);
-    iommu_dte_set_guest_cr3(mdte, hdom_id, gcr3_mfn, gv, glx);
+    dte_set_gcr3_table(mdte, hdom_id, gcr3_mfn << PAGE_SHIFT, gv, glx);
 
     amd_iommu_flush_device(iommu, req_id);
     spin_unlock_irqrestore(&iommu->lock, flags);
diff --git a/xen/drivers/passthrough/amd/iommu_map.c b/xen/drivers/passthrough/amd/iommu_map.c
index f773ab33fd..d3a8b1aec7 100644
--- a/xen/drivers/passthrough/amd/iommu_map.c
+++ b/xen/drivers/passthrough/amd/iommu_map.c
@@ -173,27 +173,6 @@ void __init iommu_dte_add_device_entry(struct amd_iommu_dte *dte,
     };
 }
 
-void iommu_dte_set_guest_cr3(struct amd_iommu_dte *dte, uint16_t dom_id,
-                             uint64_t gcr3_mfn, bool gv, uint8_t glx)
-{
-#define GCR3_MASK(hi, lo) (((1ul << ((hi) + 1)) - 1) & ~((1ul << (lo)) - 1))
-#define GCR3_SHIFT(lo) ((lo) - PAGE_SHIFT)
-
-    /* I bit must be set when gcr3 is enabled */
-    dte->i = true;
-
-    dte->gcr3_trp_14_12 = (gcr3_mfn & GCR3_MASK(14, 12)) >> GCR3_SHIFT(12);
-    dte->gcr3_trp_30_15 = (gcr3_mfn & GCR3_MASK(30, 15)) >> GCR3_SHIFT(15);
-    dte->gcr3_trp_51_31 = (gcr3_mfn & GCR3_MASK(51, 31)) >> GCR3_SHIFT(31);
-
-    dte->domain_id = dom_id;
-    dte->glx = glx;
-    dte->gv = gv;
-
-#undef GCR3_SHIFT
-#undef GCR3_MASK
-}
-
 /* Walk io page tables and build level page tables if necessary
  * {Re, un}mapping super page frames causes re-allocation of io
  * page tables.
-- 
2.11.0



             reply	other threads:[~2020-11-20 14:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20 14:19 Andrew Cooper [this message]
2020-11-20 14:32 ` [PATCH] amd-iommu: Fix Guest CR3 Table following c/s 3a7947b6901 Jan Beulich
2020-11-20 14:37   ` Andrew Cooper
2020-11-20 14:46     ` Jan Beulich
  -- strict thread matches above, loose matches on Subject: below --
2019-04-03 18:08 Andrew Cooper
2019-04-04 10:39 ` Paul Durrant
2019-04-04 10:46   ` Andrew Cooper
2019-04-04 10:59     ` Paul Durrant
2019-04-04 11:41 ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201120141951.13742-1-andrew.cooper3@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=JBeulich@suse.com \
    --cc=paul.durrant@citrix.com \
    --cc=roger.pau@citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).