From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ronny.Hegewald@online.de Subject: Re: pvops dom0: no sound after boot; possibly causedby swiotlb Date: Tue, 26 Jan 2010 20:27:34 +0100 Message-ID: <22338814.3495321264534054366.JavaMail.servlet@kundenserver> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_306687_5658899.1264534054315" Return-path: List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: konrad.wilk@oracle.com Cc: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org ------=_Part_306687_5658899.1264534054315 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit >On Tue, Jan 26, 2010 at 01:40:12AM +0100, Ronny.Hegewald@online.de wrote: >> Software: xen 3.4.1, lastest xen/master (version 2.6.31.6), both 32bit >> Hardware: Intel Core2Duo System >> 4GB Ram >> Realtek ALC888 soundchip > >Motherboard? MSI P35 Neo. > >What I think you are saying is that, when you perform these steps: > >1). Boot up machine, have swiotlb=16384 set (or just hand-coded >swiotlb.c to have a default size of 32MB). > >2). Start a DomU with more than 66MB allocated to it. > >3). Load the sound modules in Dom0 > >4). Play music/sound/etc in Dom0, the sound works fine. Generally right except a little difference. 1.) if i let the swiotlb unchanged at 64 MB and start a DomU with 66 MB or more Ram and do steps 3 and 4 the sound appears; with less RAM there is no sound 2.) if i lower the swiotlb to 32 MB and start a DomU with less then 66 MB Ram and do steps 3 and 4, then the sound is fine. >What I am curious is your E820 table. That is the first thing Xen >prints. You can get that by doing 'xm dmesg' > >Also include your 'dmesg' output for good measure. Attached. >Lastly, try adding this line to your Xen line: dom0_mem=max:2GB and >don't do any of the above mentioned hacks. Just start the sound module >and see if it works. I tried that too but used as parameter dom0_mem=2GB. But i will retry it anyway because i tried many several things so i might have done something wrong in the process. >Back to the sound card. The sound card can (I think) only DMA up to 4GB, >so when it tries to fetch data from above 4GB it ends up truncating the >physical address down to 32-bit and fetches data from somewhere else. So >you are probably listening to binary code being played :-) In that case shouldnt i have that problem on bare metal too? And there is no such problem under a 2.6.31 kernel with the forwardported dom0 patches from gentoo either. >Having a DomU start makes Xen shrink Dom0 by a certain size and the DMA >window for the sound is moved "down" below the 4GB mark (that I think is >the problem you are encountering). This should NOT happen if the sound >card driver is using DMA libraries to allocate that buffer (ie, >dma_alloc_coherent, dma_alloc_free, etc). But it might be using >'vmalloc_32' which on virtualized environments is not guaranteed to give >a swatch of memory below 4GB. Here are the steps to investigate: >look in the sound card drivers and see where and how it allocates the buffer. Thanks alot for all the explanations. Now i have a starting-point to do some further investigations. ------=_Part_306687_5658899.1264534054315 Content-Type: application/octet-stream; name=dmesg.log Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=dmesg.log Reserving virtual address space above 0xf5800000 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.6-xen-pvops (root@client2-lfs32) (gcc version 3.4.6) #19 SMP Tue Jan 26 02:21:13 CET 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Cyrix CyrixInstead NSC Geode by NSC Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC xen_release_chunk: looking at area pfn d0000-fee00 xen_release_chunk: looking at area pfn fee01-ffb00 xen_release_chunk: looking at area pfn 0-f5130 released 0 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000cffb0000 (usable) Xen: 00000000cffb0000 - 00000000cffbe000 (ACPI data) Xen: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS) Xen: 00000000cfff0000 - 00000000d0000000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffb00000 - 0000000100000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0xcffb0 max_arch_pfn = 0x1000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cffb0000 (usable) modified: 00000000cffb0000 - 00000000cffbe000 (ACPI data) modified: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS) modified: 00000000cfff0000 - 00000000d0000000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 02fff000 init_memory_mapping: 0000000000000000-000000002d1fe000 0000000000 - 002d1fe000 page 4k kernel direct mapping tables up to 2d1fe000 @ 100000-26d000 RAMDISK: 015a1000 - 022d8c00 ACPI: RSDP 000f95d0 00014 (v00 ACPIAM) ACPI: RSDT cffb0000 0003C (v01 101107 RSDT1411 20071011 MSFT 00000097) ACPI: FACP cffb0200 00084 (v01 101107 FACP1411 20071011 MSFT 00000097) ACPI: DSDT cffb0440 05564 (v01 0AAAA 0AAAA000 00000000 INTL 20051117) ACPI: FACS cffbe000 00040 ACPI: APIC cffb0390 0006C (v01 101107 APIC1411 20071011 MSFT 00000097) ACPI: MCFG cffb0400 0003C (v01 101107 OEMMCFG 20071011 MSFT 00000097) ACPI: OEMB cffbe040 00071 (v01 101107 OEMB1411 20071011 MSFT 00000097) ACPI: HPET cffb59b0 00038 (v01 101107 OEMHPET 20071011 MSFT 00000097) ACPI: GSCI cffbe0c0 02024 (v01 101107 GMCHSCI 20071011 MSFT 00000097) ACPI: Local APIC address 0xfee00000 2605MB HIGHMEM available. 721MB LOWMEM available. mapped low ram: 0 - 2d1fe000 low ram: 0 - 2d1fe000 node 0 low ram: 00000000 - 2d1fe000 node 0 bootmap 00010000 - 00015a40 (10 early reservations) ==> bootmem [0000000000 - 002d1fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [00026af000 - 00026c8000] XEN PAGETABLES ==> [00026af000 - 00026c8000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #4 [0001000000 - 000147bca8] TEXT DATA BSS ==> [0001000000 - 000147bca8] #5 [00015a1000 - 00022d8c00] RAMDISK ==> [00015a1000 - 00022d8c00] #6 [00022d9000 - 00026af000] XEN START INFO ==> [00022d9000 - 00026af000] #7 [000147c000 - 000147c15b] BRK ==> [000147c000 - 000147c15b] #8 [0000100000 - 0000252000] PGTABLE ==> [0000100000 - 0000252000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000] found SMP MP-table at [c00ff780] ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0002d1fe HighMem 0x0002d1fe -> 0x000cffb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffb0 On node 0 totalpages: 851775 free_area_init_node: node 0, pgdat c12f2bc0, node_mem_map c26c8200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1412 pages used for memmap Normal zone: 179322 pages, LIFO batch:31 HighMem zone: 5212 pages used for memmap HighMem zone: 661846 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocated 8 4k pages, static data 29212 bytes trying to map vcpu_info 0 at ed9ff020, mfn 12dada, offset 32 cpu 0 using vcpu_info at ed9ff020 trying to map vcpu_info 1 at eda0f020, mfn 12dae2, offset 32 cpu 1 using vcpu_info at eda0f020 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845119 Kernel command line: root=/dev/ram0 newroot=/dev/sda7 rw chipset=intel sata=ata_piix network=r8169 xen-dom0 PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 17037440 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) xen_swiotlb_fixup: buf=c51f0000 size=67108864 xen_swiotlb_fixup: buf=c9250000 size=32768 Placing 64MB Xen software IO TLB between c51f0000 - c91f0000 Xen software IO TLB at phys 0x51f0000 - 0x91f0000 Initializing HighMem for node 0 (0002d1fe:000cffb0) Memory: 3272652k/3407552k available (2194k kernel code, 133660k reserved, 836k data, 348k init, 2668232k highmem) virtual kernel memory layout: fixmap : 0xf576a000 - 0xf57ff000 ( 596 kB) pkmap : 0xf5200000 - 0xf5400000 (2048 kB) vmalloc : 0xed9fe000 - 0xf51fe000 ( 120 MB) lowmem : 0xc0000000 - 0xed1fe000 ( 721 MB) .init : 0xc12f6000 - 0xc134d000 ( 348 kB) .data : 0xc1224982 - 0xc12f5c28 ( 836 kB) .text : 0xc1000000 - 0xc1224982 (2194 kB) NR_IRQS:384 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4 triggering 0 polarity 0 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 xen_set_ioapic_routing: irq 5 gsi 5 vector 56 ioapic 0 pin 5 triggering 0 polarity 0 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6 triggering 0 polarity 0 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7 triggering 0 polarity 0 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> irq=9 xen_set_ioapic_routing: irq 9 gsi 9 vector 88 ioapic 0 pin 9 triggering 1 polarity 0 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 xen_set_ioapic_routing: irq 10 gsi 10 vector 96 ioapic 0 pin 10 triggering 0 polarity 0 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 xen_set_ioapic_routing: irq 11 gsi 11 vector 104 ioapic 0 pin 11 triggering 0 polarity 0 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 xen_set_ioapic_routing: irq 12 gsi 12 vector 112 ioapic 0 pin 12 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 xen_set_ioapic_routing: irq 14 gsi 14 vector 136 ioapic 0 pin 14 triggering 0 polarity 0 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 xen_set_ioapic_routing: irq 15 gsi 15 vector 144 ioapic 0 pin 15 triggering 0 polarity 0 Detected 2669.794 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 Calibrating delay loop (skipped), value calculated using timer frequency.. 5339.58 BogoMIPS (lpj=2669794) Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only. SMP alternatives: switching to UP code ACPI: Core revision 20090521 cpu 0 spinlock event irq 382 installing Xen timer for CPU 1 cpu 1 spinlock event irq 376 SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks Brought up 2 CPUs Booting paravirtualized kernel on Xen Xen version: 3.4.1 (preserve-AD) (dom0) Grant tables using version 1 layout. Grant table initialized NET: Registered protocol family 16 xenbus_probe_init ok ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xcc00-0xcc1f] pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f] pci 0000:00:1d.1: reg 20 io port: [0xc480-0xc49f] pci 0000:00:1d.2: reg 20 io port: [0xc400-0xc41f] pci 0000:00:1d.3: reg 20 io port: [0xc080-0xc09f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.2: reg 10 io port: [0xc000-0xc007] pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb48f] pci 0000:00:1f.2: reg 24 io port: [0xb400-0xb40f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) sync cpu 0 get result ffffffff max_id 0 Failed to sync pcpu 0 xenbus_probe_backend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. SCSI subsystem initialized PCI: Using ACPI for IRQ routing IO APIC resources couldn't be allocated. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 0 polarity 0 xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 0 polarity 0 xen: registering gsi 1 triggering 1 polarity 0 xen_allocate_pirq: returning irq 1 for gsi 1 xen: --> irq=1 xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:07: ioport range 0xa00-0xadf has been reserved system 00:07: ioport range 0xae0-0xaef has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x480-0x4bf has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xc0000-0xcffff could not be reserved system 00:0e: iomem range 0xe0000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.5: IO window: 0xe000-0xefff pci 0000:00:1c.5: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled xen: registering gsi 16 triggering 0 polarity 1 xen: --> irq=16 xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16 triggering 1 polarity 1 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 xen: --> irq=17 xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17 triggering 1 polarity 1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16 triggering 1 polarity 1 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Unpacking initramfs... Freeing initrd memory: 13535k freed Scanning for low memory corruption every 60 seconds highmem bounce pool size: 64 pages msgmni has been set to 1208 io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1a.0: Performing full reset pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1a.1: Performing full reset pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 pci 0000:00:1d.3: Performing full reset pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.5: setting latency timer to 64 hpet_acpi_add: no address or irqs in _CRS PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode Freeing unused kernel memory: 348k freed input: AT Translated Set 2 keyboard as /class/input/input0 NET: Registered protocol family 1 loop: module loaded NET: Registered protocol family 17 Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.13 xen: registering gsi 19 triggering 0 polarity 1 xen: --> irq=19 xen_set_ioapic_routing: irq 19 gsi 19 vector 192 ioapic 0 pin 19 triggering 1 polarity 1 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19 ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19 xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 xen_set_ioapic_routing: irq 19 gsi 19 vector 192 ioapic 0 pin 19 triggering 1 polarity 1 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 5 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01117, max UDMA7 ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 3:0:0:0: Attached scsi generic sg2 type 0 sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sda1 sda2 sda3 sda4 < sda5 sdb7 > sda6 sd 3:0:0:0: [sdb] Attached SCSI disk sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > sd 1:0:0:0: [sda] Attached SCSI disk r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17 triggering 1 polarity 1 r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:03:00.0: setting latency timer to 64 eth0: RTL8168b/8111b at 0xedae4000, 00:1d:92:32:6a:05, XID 38000000 IRQ 366 Event-channel device installed. registering netback kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS on sda7, internal journal ext3_orphan_cleanup: deleting unreferenced inode 515107 EXT3-fs: sda7: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Adding 511992k swap on /dev/system/swap. Priority:-1 extents:1 across:511992k xen: registering gsi 22 triggering 0 polarity 1 xen: --> irq=22 xen_set_ioapic_routing: irq 22 gsi 22 vector 208 ioapic 0 pin 22 triggering 1 polarity 1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_intel.c:2379: chipset global capabilities = 0x4401 ALSA sound/pci/hda/hda_intel.c:866: codec_mask = 0x1 ALSA sound/pci/hda/hda_intel.c:1297: codec #0 probed OK hda_codec: Unknown model for ALC888, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3857: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:3861: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3865: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3866: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3869: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:3877: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0888 ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Headphone Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Speaker Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Mono Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Line-Out Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave PCM Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Speaker Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1638: Cannot find slave Mono Playback Switch, skipped RPC: Registered udp transport module. RPC: Registered tcp transport module. r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 10 r8169: peth0: link up device peth0 entered promiscuous mode eth0: port 1(peth0) entering forwarding state xenbus_probe wake_waiting xenbus_probe wake_waiting XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state xenbus_probe_devices backend xenbus_probe_devices failed xenbus_directory backend_probe_and_watch devices probed ok backend_probe_and_watch watch add ok ok backend_probe_and_watch all done device vif1.0 entered promiscuous mode eth0: port 2(vif1.0) entering forwarding state ip_tables: (C) 2000-2006 Netfilter Core Team blkback: ring-ref 770, event-channel 12, protocol 1 (x86_32-abi) blkback: ring-ref 771, event-channel 13, protocol 1 (x86_32-abi) blkback: ring-ref 772, event-channel 14, protocol 1 (x86_32-abi) blkback: ring-ref 773, event-channel 15, protocol 1 (x86_32-abi) blkback: ring-ref 774, event-channel 16, protocol 1 (x86_32-abi) blkback: ring-ref 775, event-channel 17, protocol 1 (x86_32-abi) blkback: ring-ref 776, event-channel 18, protocol 1 (x86_32-abi) eth0: no IPv6 routers present peth0: no IPv6 routers present vif1.0: no IPv6 routers present peth0: received packet with own address as source address peth0: received packet with own address as source address peth0: received packet with own address as source address ------=_Part_306687_5658899.1264534054315 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ------=_Part_306687_5658899.1264534054315--