From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fantu Subject: Re: Detail on 2.6.32.11 pv_ops not boot Date: Thu, 22 Apr 2010 22:56:20 -0700 (PDT) Message-ID: <28337511.post@talk.nabble.com> References: <28287956.post@talk.nabble.com> <28326903.post@talk.nabble.com> <4BD0D6DC.5020502@goop.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4BD0D6DC.5020502@goop.org> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org With all active stop on serial, with serial disable on bios stop on ata on motherboard, if disable also that stop on usb ecc, can you merge last fix about irq and msi from xen/next to xen/stable2.6.32.x for try if solve or there is other problem? Similar problem with boot of xen/stable compiled on 1 march i have solved with CONFIG_SPARSE_IRQ=n and apply patch 0001-x86-ioapic-Remove-the-hack-for-calculating-nr_irq_ Now not patch apply and for config see the first post on this topic Jeremy Fitzhardinge wrote: > > On 04/22/2010 03:17 AM, Fantu wrote: >> Here the full output of SOL with full debug option: >> http://old.nabble.com/file/p28326903/xenboot-sol.log xenboot-sol.log >> > > Thanks for that. Does it always hang at the same place? Your > screenshot shows it apparently hanging at ata_piix, whereas the sol log > shows a hang near serial setup (which doesn't seem to overlap with the > screenshot at all). > > What does booting the same kernel natively show? > > Thanks, > J > >> >> Fantu wrote: >> >>> S.O. is Lenny 64 bit >>> Dom0 is xen 4 from hg-testing4.0 >>> Kernel is 2.6.32.11 pv_ops update with this config: >>> http://old.nabble.com/file/p28287956/.config .config >>> Server is Dell T610 with bios 2.0.13 >>> >>> I have start with all debug option found: >>> menuentry "Xen 4 hg-4.0-testing, linux 2.6.32.11 DEBUG" { >>> set root=(hd0,1) >>> multiboot /boot/xen-4.gz dom0_mem=1024M loglvl=all guest_loglvl=all >>> lapic=debug apic_verbosity=debug apic=debug iommu=off >>> module /boot/vmlinuz-2.6.32.11 root=LABEL=root-raid ro nomodeset >>> earlyprintk=xen nomodeset initcall_debug debug loglevel=10 >>> module /boot/initrd.img-2.6.32.11 >>> } >>> >>> The result is block here: >>> http://old.nabble.com/file/p28287956/2.6.32.11_pv_ops_screen.jpg >>> 2.6.32.11_pv_ops_screen.jpg >>> >>> Thanks in advantages for any help >>> >>> >> > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > -- View this message in context: http://old.nabble.com/Detail-on-2.6.32.11-pv_ops-not-boot-tp28287956p28337511.html Sent from the Xen - Dev mailing list archive at Nabble.com.