* Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 @ 2010-05-28 9:45 Fantu 2010-05-28 9:56 ` Pasi Kärkkäinen 0 siblings, 1 reply; 11+ messages in thread From: Fantu @ 2010-05-28 9:45 UTC (permalink / raw) To: xen-devel Server is Dell T610 with last bios (2.0.13) Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log lspcivvv.log dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log dmidecode.log dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log xend log: http://old.nabble.com/file/p28704783/xend.log xend.log menu.lst: title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 root (hd0,0) kernel /boot/xen.gz dom0_mem=2560M module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro nomodeset module /boot/initrd.img-2.6.32.13 The server run 12 domU windows xp with gplpv 0.11.0.213, all work On dom0 blktap not work (write about in other topic) and i must chage domU disk from tap:aio to file, is one or the problem about performance? With not set of dom0 memory and dom0 balloning have "freeze" with last msg calltrace about out of memory, i set dom0 memory in menu.lst and disable dom0 balloning, is necessary more ram that 2.5gb for dom0? There are some option in .config of kernel wrong or not good? with c state option in bios enable system is inusable, now i disable it but this is kernel, xen or bios problem? I hope this information helps improve the kernel and xen, tell me if need another information Thanks for any reply about my questions -- View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28704783.html Sent from the Xen - Dev mailing list archive at Nabble.com. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 2010-05-28 9:45 Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 Fantu @ 2010-05-28 9:56 ` Pasi Kärkkäinen 2010-05-28 11:27 ` Fantu 2010-06-03 9:30 ` Low performance and some problem with " Fantu 0 siblings, 2 replies; 11+ messages in thread From: Pasi Kärkkäinen @ 2010-05-28 9:56 UTC (permalink / raw) To: Fantu; +Cc: xen-devel On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: > > Server is Dell T610 with last bios (2.0.13) > Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 > Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: > http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 > lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log lspcivvv.log > dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log dmidecode.log > dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg > lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log > xend log: http://old.nabble.com/file/p28704783/xend.log xend.log > menu.lst: > title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 > root (hd0,0) > kernel /boot/xen.gz dom0_mem=2560M > module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro nomodeset > module /boot/initrd.img-2.6.32.13 > > The server run 12 domU windows xp with gplpv 0.11.0.213, all work > On dom0 blktap not work (write about in other topic) and i must chage domU > disk from tap:aio to file, is one or the problem about performance? > With not set of dom0 memory and dom0 balloning have "freeze" with last msg > calltrace about out of memory, i set dom0 memory in menu.lst and disable > dom0 balloning, is necessary more ram that 2.5gb for dom0? > You really don't need 2,5 GB for dom0. Start with 1024 MB. You might be able to go down to 512 MB or so. It really depends what kind of tools you run in dom0. Also remember that file: driver for guest disks uses dom0 page cache, so it may appear that a lot of dom0 memory is used when using file: driver since dom0 page cache will use *all* the free memory.. so increasing dom0 memory just makes you use more of the memory as cache. You really should get tap:aio: working instead. But I guess you open another thread about it. > There are some option in .config of kernel wrong or not good? > with c state option in bios enable system is inusable, now i disable it but > this is kernel, xen or bios problem? > > I hope this information helps improve the kernel and xen, tell me if need > another information > > Thanks for any reply about my questions > -- Pasi ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 2010-05-28 9:56 ` Pasi Kärkkäinen @ 2010-05-28 11:27 ` Fantu 2010-05-29 14:04 ` blktap2 problem with pvops " Pasi Kärkkäinen 2010-06-03 9:30 ` Low performance and some problem with " Fantu 1 sibling, 1 reply; 11+ messages in thread From: Fantu @ 2010-05-28 11:27 UTC (permalink / raw) To: xen-devel thanks for reply About blktap i not uderstand, always this error: May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: blktapctrl: v1.0.0 May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [raw image (aio)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [raw image (sync)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [vmware image (vmdk)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [ramdisk image (ram)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [qcow disk (qcow)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: [qcow2 disk (qcow2)] May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: couldn't find device number for 'blktap0' May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't open blktap interface May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to start blktapctrl But module there is in kernel and is load (see lsmod) i have try also xen 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with blktap option, also with =y and also try with sysfs deprecated option but always nothing I found also 1 problem on save of 1 domU and some of this line in log: May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took 4279522 ns Here the syslog and kern.log if can help: http://old.nabble.com/file/p28705622/kern.log kern.log http://old.nabble.com/file/p28705622/syslog syslog And xend.log when stop some minute for problem on one domU save: http://old.nabble.com/file/p28705622/xend.log xend.log Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: >> >> Server is Dell T610 with last bios (2.0.13) >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log >> lspcivvv.log >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log >> dmidecode.log >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log >> menu.lst: >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 >> root (hd0,0) >> kernel /boot/xen.gz dom0_mem=2560M >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro >> nomodeset >> module /boot/initrd.img-2.6.32.13 >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work >> On dom0 blktap not work (write about in other topic) and i must chage >> domU >> disk from tap:aio to file, is one or the problem about performance? >> With not set of dom0 memory and dom0 balloning have "freeze" with last >> msg >> calltrace about out of memory, i set dom0 memory in menu.lst and disable >> dom0 balloning, is necessary more ram that 2.5gb for dom0? >> > > You really don't need 2,5 GB for dom0. > Start with 1024 MB. You might be able to go down to 512 MB or so. > > It really depends what kind of tools you run in dom0. > > Also remember that file: driver for guest disks uses dom0 page cache, > so it may appear that a lot of dom0 memory is used when using file: driver > since dom0 page cache will use *all* the free memory.. so increasing > dom0 memory just makes you use more of the memory as cache. > > You really should get tap:aio: working instead. But I guess you open > another > thread about it. > >> There are some option in .config of kernel wrong or not good? >> with c state option in bios enable system is inusable, now i disable it >> but >> this is kernel, xen or bios problem? >> >> I hope this information helps improve the kernel and xen, tell me if need >> another information >> >> Thanks for any reply about my questions >> > > -- Pasi > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > -- View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html Sent from the Xen - Dev mailing list archive at Nabble.com. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 2010-05-28 11:27 ` Fantu @ 2010-05-29 14:04 ` Pasi Kärkkäinen 2010-05-29 14:33 ` Fantu 0 siblings, 1 reply; 11+ messages in thread From: Pasi Kärkkäinen @ 2010-05-29 14:04 UTC (permalink / raw) To: Fantu; +Cc: xen-devel On Fri, May 28, 2010 at 04:27:33AM -0700, Fantu wrote: > > thanks for reply > > About blktap i not uderstand, always this error: > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: blktapctrl: > v1.0.0 > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [raw image (aio)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [raw image (sync)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [vmware image (vmdk)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [ramdisk image (ram)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [qcow disk (qcow)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found driver: > [qcow2 disk (qcow2)] > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: couldn't > find device number for 'blktap0' > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't open > blktap interface > May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to > start blktapctrl > > But module there is in kernel and is load (see lsmod) i have try also xen > 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with > blktap option, also with =y and also try with sysfs deprecated option but > always nothing > Hmm.. are you really running Xen 4.0.0-rc1 ? If yes, then you should definitely upgrade to Xen 4.0.0 final, or even better, to Xen 4.0.1-rc1. There was some dom0 memory corruption bug fixed around Xen 4.0.0-rc6. About your blktap2 problems.. dunno really. I'll try it myself some day and let's see how it goes. -- Pasi > I found also 1 problem on save of 1 domU and some of this line in log: > May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took > 4279522 ns > > Here the syslog and kern.log if can help: > http://old.nabble.com/file/p28705622/kern.log kern.log > http://old.nabble.com/file/p28705622/syslog syslog > And xend.log when stop some minute for problem on one domU save: > http://old.nabble.com/file/p28705622/xend.log xend.log > > > Pasi Kärkkäinen wrote: > > > > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: > >> > >> Server is Dell T610 with last bios (2.0.13) > >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 > >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: > >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 > >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log > >> lspcivvv.log > >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log > >> dmidecode.log > >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg > >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log > >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log > >> menu.lst: > >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 > >> root (hd0,0) > >> kernel /boot/xen.gz dom0_mem=2560M > >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro > >> nomodeset > >> module /boot/initrd.img-2.6.32.13 > >> > >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work > >> On dom0 blktap not work (write about in other topic) and i must chage > >> domU > >> disk from tap:aio to file, is one or the problem about performance? > >> With not set of dom0 memory and dom0 balloning have "freeze" with last > >> msg > >> calltrace about out of memory, i set dom0 memory in menu.lst and disable > >> dom0 balloning, is necessary more ram that 2.5gb for dom0? > >> > > > > You really don't need 2,5 GB for dom0. > > Start with 1024 MB. You might be able to go down to 512 MB or so. > > > > It really depends what kind of tools you run in dom0. > > > > Also remember that file: driver for guest disks uses dom0 page cache, > > so it may appear that a lot of dom0 memory is used when using file: driver > > since dom0 page cache will use *all* the free memory.. so increasing > > dom0 memory just makes you use more of the memory as cache. > > > > You really should get tap:aio: working instead. But I guess you open > > another > > thread about it. > > > >> There are some option in .config of kernel wrong or not good? > >> with c state option in bios enable system is inusable, now i disable it > >> but > >> this is kernel, xen or bios problem? > >> > >> I hope this information helps improve the kernel and xen, tell me if need > >> another information > >> > >> Thanks for any reply about my questions > >> > > > > -- Pasi > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > -- > View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html > Sent from the Xen - Dev mailing list archive at Nabble.com. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 2010-05-29 14:04 ` blktap2 problem with pvops " Pasi Kärkkäinen @ 2010-05-29 14:33 ` Fantu 2010-05-29 14:45 ` Boris Derzhavets 0 siblings, 1 reply; 11+ messages in thread From: Fantu @ 2010-05-29 14:33 UTC (permalink / raw) To: xen-devel Sorry, i wrong to write, is 4.0.1-rc1, i have always take from xen-4.0-testing.hg last weeks about xen 4 Yesterday i have try tap2:aio in cfg files and work, is blktap how not work with lenny, pv_ops kernel and xen 3.4.3 or 4.0 With tap2:aio minor ram used by dom0 but i see minor performance on domU (mainly on start) All important fix do in unstable are merged with xen-4.0-testing.hg? Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 04:27:33AM -0700, Fantu wrote: >> >> thanks for reply >> >> About blktap i not uderstand, always this error: >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: >> blktapctrl: >> v1.0.0 >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [raw image (aio)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [raw image (sync)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [vmware image (vmdk)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [ramdisk image (ram)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [qcow disk (qcow)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [qcow2 disk (qcow2)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: >> couldn't >> find device number for 'blktap0' >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't >> open >> blktap interface >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to >> start blktapctrl >> >> But module there is in kernel and is load (see lsmod) i have try also xen >> 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with >> blktap option, also with =y and also try with sysfs deprecated option but >> always nothing >> > > Hmm.. are you really running Xen 4.0.0-rc1 ? If yes, then you should > definitely > upgrade to Xen 4.0.0 final, or even better, to Xen 4.0.1-rc1. > > There was some dom0 memory corruption bug fixed around Xen 4.0.0-rc6. > > About your blktap2 problems.. dunno really. I'll try it myself some day > and > let's see how it goes. > > -- Pasi > >> I found also 1 problem on save of 1 domU and some of this line in log: >> May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took >> 4279522 ns >> >> Here the syslog and kern.log if can help: >> http://old.nabble.com/file/p28705622/kern.log kern.log >> http://old.nabble.com/file/p28705622/syslog syslog >> And xend.log when stop some minute for problem on one domU save: >> http://old.nabble.com/file/p28705622/xend.log xend.log >> >> >> Pasi Kärkkäinen wrote: >> > >> > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: >> >> >> >> Server is Dell T610 with last bios (2.0.13) >> >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 >> >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this >> config: >> >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 >> >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log >> >> lspcivvv.log >> >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log >> >> dmidecode.log >> >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg >> >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log >> >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log >> >> menu.lst: >> >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 >> >> root (hd0,0) >> >> kernel /boot/xen.gz dom0_mem=2560M >> >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro >> >> nomodeset >> >> module /boot/initrd.img-2.6.32.13 >> >> >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work >> >> On dom0 blktap not work (write about in other topic) and i must chage >> >> domU >> >> disk from tap:aio to file, is one or the problem about performance? >> >> With not set of dom0 memory and dom0 balloning have "freeze" with last >> >> msg >> >> calltrace about out of memory, i set dom0 memory in menu.lst and >> disable >> >> dom0 balloning, is necessary more ram that 2.5gb for dom0? >> >> >> > >> > You really don't need 2,5 GB for dom0. >> > Start with 1024 MB. You might be able to go down to 512 MB or so. >> > >> > It really depends what kind of tools you run in dom0. >> > >> > Also remember that file: driver for guest disks uses dom0 page cache, >> > so it may appear that a lot of dom0 memory is used when using file: >> driver >> > since dom0 page cache will use *all* the free memory.. so increasing >> > dom0 memory just makes you use more of the memory as cache. >> > >> > You really should get tap:aio: working instead. But I guess you open >> > another >> > thread about it. >> > >> >> There are some option in .config of kernel wrong or not good? >> >> with c state option in bios enable system is inusable, now i disable >> it >> >> but >> >> this is kernel, xen or bios problem? >> >> >> >> I hope this information helps improve the kernel and xen, tell me if >> need >> >> another information >> >> >> >> Thanks for any reply about my questions >> >> >> > >> > -- Pasi >> > >> > >> > _______________________________________________ >> > Xen-devel mailing list >> > Xen-devel@lists.xensource.com >> > http://lists.xensource.com/xen-devel >> > >> > >> >> -- >> View this message in context: >> http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html >> Sent from the Xen - Dev mailing list archive at Nabble.com. >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > -- View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html Sent from the Xen - Dev mailing list archive at Nabble.com. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 2010-05-29 14:33 ` Fantu @ 2010-05-29 14:45 ` Boris Derzhavets 2010-05-29 15:15 ` Pasi Kärkkäinen 0 siblings, 1 reply; 11+ messages in thread From: Boris Derzhavets @ 2010-05-29 14:45 UTC (permalink / raw) To: xen-devel, Fantu [-- Attachment #1.1: Type: text/plain, Size: 7103 bytes --] I've attempted to install Nexenta Core 3 image under Xen 4.0 (2.6.32.13 pvops) on top of F13. Sample nexenta3.cfg profile contains 4 lines like this:- disk=['tat:tapdisk:vhd:/path/../disk.img,xvda,w'] ( from sample) It generates message File 'vhd:/path/.../disk.img' doesn't exist. Boris. P.S. It was already in one of the threads @xen-users. --- On Sat, 5/29/10, Fantu <fantonifabio@tiscali.it> wrote: From: Fantu <fantonifabio@tiscali.it> Subject: Re: [Xen-devel] blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 To: xen-devel@lists.xensource.com Date: Saturday, May 29, 2010, 10:33 AM Sorry, i wrong to write, is 4.0.1-rc1, i have always take from xen-4.0-testing.hg last weeks about xen 4 Yesterday i have try tap2:aio in cfg files and work, is blktap how not work with lenny, pv_ops kernel and xen 3.4.3 or 4.0 With tap2:aio minor ram used by dom0 but i see minor performance on domU (mainly on start) All important fix do in unstable are merged with xen-4.0-testing.hg? Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 04:27:33AM -0700, Fantu wrote: >> >> thanks for reply >> >> About blktap i not uderstand, always this error: >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: >> blktapctrl: >> v1.0.0 >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [raw image (aio)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [raw image (sync)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [vmware image (vmdk)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [ramdisk image (ram)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [qcow disk (qcow)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found >> driver: >> [qcow2 disk (qcow2)] >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: >> couldn't >> find device number for 'blktap0' >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't >> open >> blktap interface >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to >> start blktapctrl >> >> But module there is in kernel and is load (see lsmod) i have try also xen >> 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with >> blktap option, also with =y and also try with sysfs deprecated option but >> always nothing >> > > Hmm.. are you really running Xen 4.0.0-rc1 ? If yes, then you should > definitely > upgrade to Xen 4.0.0 final, or even better, to Xen 4.0.1-rc1. > > There was some dom0 memory corruption bug fixed around Xen 4.0.0-rc6. > > About your blktap2 problems.. dunno really. I'll try it myself some day > and > let's see how it goes. > > -- Pasi > >> I found also 1 problem on save of 1 domU and some of this line in log: >> May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took >> 4279522 ns >> >> Here the syslog and kern.log if can help: >> http://old.nabble.com/file/p28705622/kern.log kern.log >> http://old.nabble.com/file/p28705622/syslog syslog >> And xend.log when stop some minute for problem on one domU save: >> http://old.nabble.com/file/p28705622/xend.log xend.log >> >> >> Pasi Kärkkäinen wrote: >> > >> > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: >> >> >> >> Server is Dell T610 with last bios (2.0.13) >> >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 >> >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this >> config: >> >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 >> >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log >> >> lspcivvv.log >> >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log >> >> dmidecode.log >> >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg >> >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log >> >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log >> >> menu.lst: >> >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 >> >> root (hd0,0) >> >> kernel /boot/xen.gz dom0_mem=2560M >> >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro >> >> nomodeset >> >> module /boot/initrd.img-2.6.32.13 >> >> >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work >> >> On dom0 blktap not work (write about in other topic) and i must chage >> >> domU >> >> disk from tap:aio to file, is one or the problem about performance? >> >> With not set of dom0 memory and dom0 balloning have "freeze" with last >> >> msg >> >> calltrace about out of memory, i set dom0 memory in menu.lst and >> disable >> >> dom0 balloning, is necessary more ram that 2.5gb for dom0? >> >> >> > >> > You really don't need 2,5 GB for dom0. >> > Start with 1024 MB. You might be able to go down to 512 MB or so. >> > >> > It really depends what kind of tools you run in dom0. >> > >> > Also remember that file: driver for guest disks uses dom0 page cache, >> > so it may appear that a lot of dom0 memory is used when using file: >> driver >> > since dom0 page cache will use *all* the free memory.. so increasing >> > dom0 memory just makes you use more of the memory as cache. >> > >> > You really should get tap:aio: working instead. But I guess you open >> > another >> > thread about it. >> > >> >> There are some option in .config of kernel wrong or not good? >> >> with c state option in bios enable system is inusable, now i disable >> it >> >> but >> >> this is kernel, xen or bios problem? >> >> >> >> I hope this information helps improve the kernel and xen, tell me if >> need >> >> another information >> >> >> >> Thanks for any reply about my questions >> >> >> > >> > -- Pasi >> > >> > >> > _______________________________________________ >> > Xen-devel mailing list >> > Xen-devel@lists.xensource.com >> > http://lists.xensource.com/xen-devel >> > >> > >> >> -- >> View this message in context: >> http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html >> Sent from the Xen - Dev mailing list archive at Nabble.com. >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > -- View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html Sent from the Xen - Dev mailing list archive at Nabble.com. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 10833 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 2010-05-29 14:45 ` Boris Derzhavets @ 2010-05-29 15:15 ` Pasi Kärkkäinen 2010-05-29 15:30 ` Boris Derzhavets 0 siblings, 1 reply; 11+ messages in thread From: Pasi Kärkkäinen @ 2010-05-29 15:15 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, Fantu On Sat, May 29, 2010 at 07:45:41AM -0700, Boris Derzhavets wrote: > I've attempted to install Nexenta Core 3 image under Xen 4.0 (2.6.32.13 pvops) on top of F13. Sample nexenta3.cfg profile > contains 4 lines like this:- > > disk=['tat:tapdisk:vhd:/path/../disk.img,xvda,w'] ( from sample) > Should be 'tap', not 'tat'.. -- Pasi > It generates message > File 'vhd:/path/.../disk.img' doesn't exist. > > Boris. > P.S. It was already in one of the threads @xen-users. > > --- On Sat, 5/29/10, Fantu <fantonifabio@tiscali.it> wrote: > > From: Fantu <fantonifabio@tiscali.it> > Subject: Re: [Xen-devel] blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 > To: xen-devel@lists.xensource.com > Date: Saturday, May 29, 2010, 10:33 AM > > Sorry, i wrong to write, is 4.0.1-rc1, i have always take from > xen-4.0-testing.hg last weeks about xen 4 > Yesterday i have try tap2:aio in cfg files and work, is blktap how not work > with lenny, pv_ops kernel and xen 3.4.3 or 4.0 > With tap2:aio minor ram used by dom0 but i see minor performance on domU > (mainly on start) > All important fix do in unstable are merged with xen-4.0-testing.hg? > > Pasi Kärkkäinen wrote: > > > > On Fri, May 28, 2010 at 04:27:33AM -0700, Fantu wrote: > >> > >> thanks for reply > >> > >> About blktap i not uderstand, always this error: > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: > >> blktapctrl: > >> v1.0.0 > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [raw image (aio)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [raw image (sync)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [vmware image (vmdk)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [ramdisk image (ram)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [qcow disk (qcow)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [qcow2 disk (qcow2)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: > >> couldn't > >> find device number for 'blktap0' > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't > >> open > >> blktap interface > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to > >> start blktapctrl > >> > >> But module there is in kernel and is load (see lsmod) i have try also xen > >> 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with > >> blktap option, also with =y and also try with sysfs deprecated option but > >> always nothing > >> > > > > Hmm.. are you really running Xen 4.0.0-rc1 ? If yes, then you should > > definitely > > upgrade to Xen 4.0.0 final, or even better, to Xen 4.0.1-rc1. > > > > There was some dom0 memory corruption bug fixed around Xen 4.0.0-rc6. > > > > About your blktap2 problems.. dunno really. I'll try it myself some day > > and > > let's see how it goes. > > > > -- Pasi > > > >> I found also 1 problem on save of 1 domU and some of this line in log: > >> May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took > >> 4279522 ns > >> > >> Here the syslog and kern.log if can help: > >> [1]http://old.nabble.com/file/p28705622/kern.log kern.log > >> [2]http://old.nabble.com/file/p28705622/syslog syslog > >> And xend.log when stop some minute for problem on one domU save: > >> [3]http://old.nabble.com/file/p28705622/xend.log xend.log > >> > >> > >> Pasi Kärkkäinen wrote: > >> > > >> > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: > >> >> > >> >> Server is Dell T610 with last bios (2.0.13) > >> >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 > >> >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this > >> config: > >> >> [4]http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 > >> >> lspci -vvv: [5]http://old.nabble.com/file/p28704783/lspcivvv.log > >> >> lspcivvv.log > >> >> dmidecode: [6]http://old.nabble.com/file/p28704783/dmidecode.log > >> >> dmidecode.log > >> >> dmesg: [7]http://old.nabble.com/file/p28704783/dmesg dmesg > >> >> lsmod: [8]http://old.nabble.com/file/p28704783/lsmod.log lsmod.log > >> >> xend log: [9]http://old.nabble.com/file/p28704783/xend.log xend.log > >> >> menu.lst: > >> >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 > >> >> root (hd0,0) > >> >> kernel /boot/xen.gz dom0_mem=2560M > >> >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro > >> >> nomodeset > >> >> module /boot/initrd.img-2.6.32.13 > >> >> > >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work > >> >> On dom0 blktap not work (write about in other topic) and i must chage > >> >> domU > >> >> disk from tap:aio to file, is one or the problem about performance? > >> >> With not set of dom0 memory and dom0 balloning have "freeze" with last > >> >> msg > >> >> calltrace about out of memory, i set dom0 memory in menu.lst and > >> disable > >> >> dom0 balloning, is necessary more ram that 2.5gb for dom0? > >> >> > >> > > >> > You really don't need 2,5 GB for dom0. > >> > Start with 1024 MB. You might be able to go down to 512 MB or so. > >> > > >> > It really depends what kind of tools you run in dom0. > >> > > >> > Also remember that file: driver for guest disks uses dom0 page cache, > >> > so it may appear that a lot of dom0 memory is used when using file: > >> driver > >> > since dom0 page cache will use *all* the free memory.. so increasing > >> > dom0 memory just makes you use more of the memory as cache. > >> > > >> > You really should get tap:aio: working instead. But I guess you open > >> > another > >> > thread about it. > >> > > >> >> There are some option in .config of kernel wrong or not good? > >> >> with c state option in bios enable system is inusable, now i disable > >> it > >> >> but > >> >> this is kernel, xen or bios problem? > >> >> > >> >> I hope this information helps improve the kernel and xen, tell me if > >> need > >> >> another information > >> >> > >> >> Thanks for any reply about my questions > >> >> > >> > > >> > -- Pasi > >> > > >> > > >> > _______________________________________________ > >> > Xen-devel mailing list > >> > [10]Xen-devel@lists.xensource.com > >> > [11]http://lists.xensource.com/xen-devel > >> > > >> > > >> > >> -- > >> View this message in context: > >> > [12]http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html > >> Sent from the Xen - Dev mailing list archive at Nabble.com. > >> > >> > >> _______________________________________________ > >> Xen-devel mailing list > >> [13]Xen-devel@lists.xensource.com > >> [14]http://lists.xensource.com/xen-devel > > > > _______________________________________________ > > Xen-devel mailing list > > [15]Xen-devel@lists.xensource.com > > [16]http://lists.xensource.com/xen-devel > > > > > > -- > View this message in context: > [17]http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html > Sent from the Xen - Dev mailing list archive at Nabble.com. > > _______________________________________________ > Xen-devel mailing list > [18]Xen-devel@lists.xensource.com > [19]http://lists.xensource.com/xen-devel > > References > > Visible links > 1. http://old.nabble.com/file/p28705622/kern.log > 2. http://old.nabble.com/file/p28705622/syslog > 3. http://old.nabble.com/file/p28705622/xend.log > 4. http://old.nabble.com/file/p28704783/config-2.6.32.13 > 5. http://old.nabble.com/file/p28704783/lspcivvv.log > 6. http://old.nabble.com/file/p28704783/dmidecode.log > 7. http://old.nabble.com/file/p28704783/dmesg > 8. http://old.nabble.com/file/p28704783/lsmod.log > 9. http://old.nabble.com/file/p28704783/xend.log > 10. file:///mc/compose?to=Xen-devel@lists.xensource.com > 11. http://lists.xensource.com/xen-devel > 12. http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html > 13. file:///mc/compose?to=Xen-devel@lists.xensource.com > 14. http://lists.xensource.com/xen-devel > 15. file:///mc/compose?to=Xen-devel@lists.xensource.com > 16. http://lists.xensource.com/xen-devel > 17. http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html > 18. file:///mc/compose?to=Xen-devel@lists.xensource.com > 19. http://lists.xensource.com/xen-devel > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 2010-05-29 15:15 ` Pasi Kärkkäinen @ 2010-05-29 15:30 ` Boris Derzhavets 0 siblings, 0 replies; 11+ messages in thread From: Boris Derzhavets @ 2010-05-29 15:30 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, Fantu [-- Attachment #1.1: Type: text/plain, Size: 9936 bytes --] It's typo in the message. Sample has "tap:tapdisk:vhd"+path+..... It's old issue. Boris. --- On Sat, 5/29/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-devel@lists.xensource.com, "Fantu" <fantonifabio@tiscali.it> Date: Saturday, May 29, 2010, 11:15 AM On Sat, May 29, 2010 at 07:45:41AM -0700, Boris Derzhavets wrote: > I've attempted to install Nexenta Core 3 image under Xen 4.0 (2.6.32.13 pvops) on top of F13. Sample nexenta3.cfg profile > contains 4 lines like this:- > > disk=['tat:tapdisk:vhd:/path/../disk.img,xvda,w'] ( from sample) > Should be 'tap', not 'tat'.. -- Pasi > It generates message > File 'vhd:/path/.../disk.img' doesn't exist. > > Boris. > P.S. It was already in one of the threads @xen-users. > > --- On Sat, 5/29/10, Fantu <fantonifabio@tiscali.it> wrote: > > From: Fantu <fantonifabio@tiscali.it> > Subject: Re: [Xen-devel] blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1 > To: xen-devel@lists.xensource.com > Date: Saturday, May 29, 2010, 10:33 AM > > Sorry, i wrong to write, is 4.0.1-rc1, i have always take from > xen-4.0-testing.hg last weeks about xen 4 > Yesterday i have try tap2:aio in cfg files and work, is blktap how not work > with lenny, pv_ops kernel and xen 3.4.3 or 4.0 > With tap2:aio minor ram used by dom0 but i see minor performance on domU > (mainly on start) > All important fix do in unstable are merged with xen-4.0-testing.hg? > > Pasi Kärkkäinen wrote: > > > > On Fri, May 28, 2010 at 04:27:33AM -0700, Fantu wrote: > >> > >> thanks for reply > >> > >> About blktap i not uderstand, always this error: > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:790: > >> blktapctrl: > >> v1.0.0 > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [raw image (aio)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [raw image (sync)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [vmware image (vmdk)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [ramdisk image (ram)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [qcow disk (qcow)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:792: Found > >> driver: > >> [qcow2 disk (qcow2)] > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl_linux.c:92: > >> couldn't > >> find device number for 'blktap0' > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:859: couldn't > >> open > >> blktap interface > >> May 28 12:05:56 cpmcOR01AV BLKTAPCTRL[2775]: blktapctrl.c:922: Unable to > >> start blktapctrl > >> > >> But module there is in kernel and is load (see lsmod) i have try also xen > >> 3.4.3, kernel 2.6.31 and 2.6.32 with some different config, always with > >> blktap option, also with =y and also try with sysfs deprecated option but > >> always nothing > >> > > > > Hmm.. are you really running Xen 4.0.0-rc1 ? If yes, then you should > > definitely > > upgrade to Xen 4.0.0 final, or even better, to Xen 4.0.1-rc1. > > > > There was some dom0 memory corruption bug fixed around Xen 4.0.0-rc6. > > > > About your blktap2 problems.. dunno really. I'll try it myself some day > > and > > let's see how it goes. > > > > -- Pasi > > > >> I found also 1 problem on save of 1 domU and some of this line in log: > >> May 28 12:55:35 cpmcOR01AV kernel: [ 3000.882349] hrtimer: interrupt took > >> 4279522 ns > >> > >> Here the syslog and kern.log if can help: > >> [1]http://old.nabble.com/file/p28705622/kern.log kern.log > >> [2]http://old.nabble.com/file/p28705622/syslog syslog > >> And xend.log when stop some minute for problem on one domU save: > >> [3]http://old.nabble.com/file/p28705622/xend.log xend.log > >> > >> > >> Pasi Kärkkäinen wrote: > >> > > >> > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: > >> >> > >> >> Server is Dell T610 with last bios (2.0.13) > >> >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 > >> >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this > >> config: > >> >> [4]http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 > >> >> lspci -vvv: [5]http://old.nabble.com/file/p28704783/lspcivvv.log > >> >> lspcivvv.log > >> >> dmidecode: [6]http://old.nabble.com/file/p28704783/dmidecode.log > >> >> dmidecode.log > >> >> dmesg: [7]http://old.nabble.com/file/p28704783/dmesg dmesg > >> >> lsmod: [8]http://old.nabble.com/file/p28704783/lsmod.log lsmod.log > >> >> xend log: [9]http://old.nabble.com/file/p28704783/xend.log xend.log > >> >> menu.lst: > >> >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 > >> >> root (hd0,0) > >> >> kernel /boot/xen.gz dom0_mem=2560M > >> >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro > >> >> nomodeset > >> >> module /boot/initrd.img-2.6.32.13 > >> >> > >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work > >> >> On dom0 blktap not work (write about in other topic) and i must chage > >> >> domU > >> >> disk from tap:aio to file, is one or the problem about performance? > >> >> With not set of dom0 memory and dom0 balloning have "freeze" with last > >> >> msg > >> >> calltrace about out of memory, i set dom0 memory in menu.lst and > >> disable > >> >> dom0 balloning, is necessary more ram that 2.5gb for dom0? > >> >> > >> > > >> > You really don't need 2,5 GB for dom0. > >> > Start with 1024 MB. You might be able to go down to 512 MB or so. > >> > > >> > It really depends what kind of tools you run in dom0. > >> > > >> > Also remember that file: driver for guest disks uses dom0 page cache, > >> > so it may appear that a lot of dom0 memory is used when using file: > >> driver > >> > since dom0 page cache will use *all* the free memory.. so increasing > >> > dom0 memory just makes you use more of the memory as cache. > >> > > >> > You really should get tap:aio: working instead. But I guess you open > >> > another > >> > thread about it. > >> > > >> >> There are some option in .config of kernel wrong or not good? > >> >> with c state option in bios enable system is inusable, now i disable > >> it > >> >> but > >> >> this is kernel, xen or bios problem? > >> >> > >> >> I hope this information helps improve the kernel and xen, tell me if > >> need > >> >> another information > >> >> > >> >> Thanks for any reply about my questions > >> >> > >> > > >> > -- Pasi > >> > > >> > > >> > _______________________________________________ > >> > Xen-devel mailing list > >> > [10]Xen-devel@lists.xensource.com > >> > [11]http://lists.xensource.com/xen-devel > >> > > >> > > >> > >> -- > >> View this message in context: > >> > [12]http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html > >> Sent from the Xen - Dev mailing list archive at Nabble.com. > >> > >> > >> _______________________________________________ > >> Xen-devel mailing list > >> [13]Xen-devel@lists.xensource.com > >> [14]http://lists.xensource.com/xen-devel > > > > _______________________________________________ > > Xen-devel mailing list > > [15]Xen-devel@lists.xensource.com > > [16]http://lists.xensource.com/xen-devel > > > > > > -- > View this message in context: > [17]http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html > Sent from the Xen - Dev mailing list archive at Nabble.com. > > _______________________________________________ > Xen-devel mailing list > [18]Xen-devel@lists.xensource.com > [19]http://lists.xensource.com/xen-devel > > References > > Visible links > 1. http://old.nabble.com/file/p28705622/kern.log > 2. http://old.nabble.com/file/p28705622/syslog > 3. http://old.nabble.com/file/p28705622/xend.log > 4. http://old.nabble.com/file/p28704783/config-2.6.32.13 > 5. http://old.nabble.com/file/p28704783/lspcivvv.log > 6. http://old.nabble.com/file/p28704783/dmidecode.log > 7. http://old.nabble.com/file/p28704783/dmesg > 8. http://old.nabble.com/file/p28704783/lsmod.log > 9. http://old.nabble.com/file/p28704783/xend.log > 10. file:///mc/compose?to=Xen-devel@lists.xensource.com > 11. http://lists.xensource.com/xen-devel > 12. http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28705622.html > 13. file:///mc/compose?to=Xen-devel@lists.xensource.com > 14. http://lists.xensource.com/xen-devel > 15. file:///mc/compose?to=Xen-devel@lists.xensource.com > 16. http://lists.xensource.com/xen-devel > 17. http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0-rc1-tp28704783p28716348.html > 18. file:///mc/compose?to=Xen-devel@lists.xensource.com > 19. http://lists.xensource.com/xen-devel > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 19682 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 2010-05-28 9:56 ` Pasi Kärkkäinen 2010-05-28 11:27 ` Fantu @ 2010-06-03 9:30 ` Fantu 2010-06-03 9:48 ` Pasi Kärkkäinen 1 sibling, 1 reply; 11+ messages in thread From: Fantu @ 2010-06-03 9:30 UTC (permalink / raw) To: xen-devel Now i have update kernel to last of xen/stable2.6.32.x DomU disk is with blktap2 (tap2:aio) 13 domU hvm (windows xp with gplpv 0.11.213) running dom0 ram decrease to 1.5 gb: ------------------------ #free total used free shared buffers cached Mem: 1563136 1485024 78112 0 35960 1155452 -/+ buffers/cache: 293612 1269524 Swap: 2097144 0 2097144 ------------------------ Some error show on boot mainly about ioapic and acpi, here dmesg: http://old.nabble.com/file/p28765188/dmesg dmesg What these messagges are related to? Kernel, xen or bios? Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: >> >> Server is Dell T610 with last bios (2.0.13) >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log >> lspcivvv.log >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log >> dmidecode.log >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log >> menu.lst: >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 >> root (hd0,0) >> kernel /boot/xen.gz dom0_mem=2560M >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro >> nomodeset >> module /boot/initrd.img-2.6.32.13 >> >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work >> On dom0 blktap not work (write about in other topic) and i must chage >> domU >> disk from tap:aio to file, is one or the problem about performance? >> With not set of dom0 memory and dom0 balloning have "freeze" with last >> msg >> calltrace about out of memory, i set dom0 memory in menu.lst and disable >> dom0 balloning, is necessary more ram that 2.5gb for dom0? >> > > You really don't need 2,5 GB for dom0. > Start with 1024 MB. You might be able to go down to 512 MB or so. > > It really depends what kind of tools you run in dom0. > > Also remember that file: driver for guest disks uses dom0 page cache, > so it may appear that a lot of dom0 memory is used when using file: driver > since dom0 page cache will use *all* the free memory.. so increasing > dom0 memory just makes you use more of the memory as cache. > > You really should get tap:aio: working instead. But I guess you open > another > thread about it. > >> There are some option in .config of kernel wrong or not good? >> with c state option in bios enable system is inusable, now i disable it >> but >> this is kernel, xen or bios problem? >> >> I hope this information helps improve the kernel and xen, tell me if need >> another information >> >> Thanks for any reply about my questions >> > > -- Pasi > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > -- View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0.1-rc1-tp28704783p28765188.html Sent from the Xen - Dev mailing list archive at Nabble.com. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 2010-06-03 9:30 ` Low performance and some problem with " Fantu @ 2010-06-03 9:48 ` Pasi Kärkkäinen 0 siblings, 0 replies; 11+ messages in thread From: Pasi Kärkkäinen @ 2010-06-03 9:48 UTC (permalink / raw) To: Fantu; +Cc: xen-devel On Thu, Jun 03, 2010 at 02:30:36AM -0700, Fantu wrote: > > Now i have update kernel to last of xen/stable2.6.32.x > DomU disk is with blktap2 (tap2:aio) > 13 domU hvm (windows xp with gplpv 0.11.213) running > dom0 ram decrease to 1.5 gb: > ------------------------ > #free > total used free shared buffers cached > Mem: 1563136 1485024 78112 0 35960 1155452 ^^^^^^^ 1.1 GB is used as cache (which is bypassed by both phy: and tap:aio drivers), so you'd basicly need only around 512 MB for dom0. -- Pasi > -/+ buffers/cache: 293612 1269524 > Swap: 2097144 0 2097144 > ------------------------ > Some error show on boot mainly about ioapic and acpi, here dmesg: > http://old.nabble.com/file/p28765188/dmesg dmesg > What these messagges are related to? Kernel, xen or bios? > > > > Pasi Kärkkäinen wrote: > > > > On Fri, May 28, 2010 at 02:45:04AM -0700, Fantu wrote: > >> > >> Server is Dell T610 with last bios (2.0.13) > >> Dom0: Lenny 64 bit, kernel 2.6.32.13, xen 4.0-rc1 > >> Kernel is last commit of jeremy git xen/stable-2.6.32.x with this config: > >> http://old.nabble.com/file/p28704783/config-2.6.32.13 config-2.6.32.13 > >> lspci -vvv: http://old.nabble.com/file/p28704783/lspcivvv.log > >> lspcivvv.log > >> dmidecode: http://old.nabble.com/file/p28704783/dmidecode.log > >> dmidecode.log > >> dmesg: http://old.nabble.com/file/p28704783/dmesg dmesg > >> lsmod: http://old.nabble.com/file/p28704783/lsmod.log lsmod.log > >> xend log: http://old.nabble.com/file/p28704783/xend.log xend.log > >> menu.lst: > >> title Xen 4 / Debian GNU/Linux, kernel 2.6.32.13 > >> root (hd0,0) > >> kernel /boot/xen.gz dom0_mem=2560M > >> module /boot/vmlinuz-2.6.32.13 root=LABEL=root-backup2 ro > >> nomodeset > >> module /boot/initrd.img-2.6.32.13 > >> > >> The server run 12 domU windows xp with gplpv 0.11.0.213, all work > >> On dom0 blktap not work (write about in other topic) and i must chage > >> domU > >> disk from tap:aio to file, is one or the problem about performance? > >> With not set of dom0 memory and dom0 balloning have "freeze" with last > >> msg > >> calltrace about out of memory, i set dom0 memory in menu.lst and disable > >> dom0 balloning, is necessary more ram that 2.5gb for dom0? > >> > > > > You really don't need 2,5 GB for dom0. > > Start with 1024 MB. You might be able to go down to 512 MB or so. > > > > It really depends what kind of tools you run in dom0. > > > > Also remember that file: driver for guest disks uses dom0 page cache, > > so it may appear that a lot of dom0 memory is used when using file: driver > > since dom0 page cache will use *all* the free memory.. so increasing > > dom0 memory just makes you use more of the memory as cache. > > > > You really should get tap:aio: working instead. But I guess you open > > another > > thread about it. > > > >> There are some option in .config of kernel wrong or not good? > >> with c state option in bios enable system is inusable, now i disable it > >> but > >> this is kernel, xen or bios problem? > >> > >> I hope this information helps improve the kernel and xen, tell me if need > >> another information > >> > >> Thanks for any reply about my questions > >> > > > > -- Pasi > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > -- > View this message in context: http://old.nabble.com/Low-performance-and-some-problem-with-kernel-2.6.32.13-and-xen-4.0.1-rc1-tp28704783p28765188.html > Sent from the Xen - Dev mailing list archive at Nabble.com. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1
@ 2010-05-30 7:17 eXeC001er
0 siblings, 0 replies; 11+ messages in thread
From: eXeC001er @ 2010-05-30 7:17 UTC (permalink / raw)
To: Xen-devel, Boris Derzhavets
[-- Attachment #1.1: Type: text/plain, Size: 521 bytes --]
>
> I've attempted to install Nexenta Core 3 image under Xen 4.0 (2.6.32.13
> pvops) on top of F13. Sample nexenta3.cfg profile contains 4 lines like
> this:-
>
> disk=['tat:tapdisk:vhd:/path/../disk.img,xvda,w'] ( from sample)
>
> It generates message
> File 'vhd:/path/.../disk.img' doesn't exist.
>
> Boris.
> P.S. It was already in one of the threads @xen-users.
This bug in "def _parse_uname(uname):" (tools/python/xen/util/blkif.py)
(taptype, fn) = fn.split(":", 1) >>>>>> (taptype, fn) = fn.split(":",
2)[1:3]
[-- Attachment #1.2: Type: text/html, Size: 1013 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 11+ messages in threadend of thread, other threads:[~2010-06-03 9:48 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-05-28 9:45 Low performance and some problem with kernel 2.6.32.13 and xen 4.0-rc1 Fantu 2010-05-28 9:56 ` Pasi Kärkkäinen 2010-05-28 11:27 ` Fantu 2010-05-29 14:04 ` blktap2 problem with pvops " Pasi Kärkkäinen 2010-05-29 14:33 ` Fantu 2010-05-29 14:45 ` Boris Derzhavets 2010-05-29 15:15 ` Pasi Kärkkäinen 2010-05-29 15:30 ` Boris Derzhavets 2010-06-03 9:30 ` Low performance and some problem with " Fantu 2010-06-03 9:48 ` Pasi Kärkkäinen -- strict thread matches above, loose matches on Subject: below -- 2010-05-30 7:17 blktap2 problem with pvops " eXeC001er
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).