Re: domU guest for xcp 0.1.1

[Ritu kaur <ritu.kaur.us@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 4348 bytes --]

Hi Sander,

Thanks, I enabled DOM0 and other backend drivers along with pci frontend in
.config file. I am able to get it build. However, I having additional
questions, inputs appreciated.

1. can this kernel be used in any linux distribution? I have Debian Lenny as
DomU?

2. In Debian Lenny /boot/grub/menu.lst, I have
title           Debian GNU/Linux, kernel 2.6.26-2-686-bigmem
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.26-2-686-bigmem root=/dev/xvda1 ro
console=hvc0 quiet
initrd          /boot/initrd.img-2.6.26-2-686-bigmem

but the kernel image built in arch/i386/boot is bzImage. Does "make
modules_install" and "make install" take care of it, since I am not sure I
haven't tried it.

Basically, my question boils down to

1. Can I use bzImage in debian lenny,
2. does make install take care of configuring it


Thanks

On Sun, Mar 14, 2010 at 4:15 AM, Sander Eikelenboom <linux@eikelenboom.it>wrote:

> Hello Ritu,
>
> There are some problems with pci.h, i have also reported this to Konrad.
> As a workaround you can enable dom0 support in these kernels, then they
> compile fine in my case.
>
> --
>
> Sander
>
>
> Sunday, March 14, 2010, 2:43:23 AM, you wrote:
>
> > I followed the steps mentioned in  wiki to pull xen code to compile domU
> > kernel from
>
> > 1. xen/master, I get following compilation errors. I do see in xen-devel
> > forum someone else has reported similar issue but no solution yet(patch
> > provided by Konrad has followup errors)
>
> > CC [M]  drivers/watchdog/machzwd.o
> >   CC [M]  drivers/watchdog/sbc_epx_c3.o
> >   CC [M]  drivers/watchdog/softdog.o
> >   CC      drivers/xen/grant-table.o
> >   CC      drivers/xen/features.o
> >   CC      drivers/xen/events.o
> > drivers/xen/events.c:605: error: redefinition of ‘xen_destroy_irq’
> > /root/kernel/linux.2-6.xen/arch/x86/include/asm/xen/pci.h:29: error:
> > previous definition of ‘xen_destroy_irq’ was here
> > drivers/xen/events.c:637: error: redefinition of ‘xen_create_msi_irq’
> > /root/kernel/linux.2-6.xen/arch/x86/include/asm/xen/pci.h:25: error:
> > previous definition of ‘xen_create_msi_irq’ was here
> > make[2]: *** [drivers/xen/events.o] Error 1
> > make[1]: *** [drivers/xen] Error 2
> > make: *** [drivers] Error 2
>
> > 2. xen/stable, I get following errors
>
> >  CC      drivers/pci/xen-pcifront.o
> > drivers/pci/xen-pcifront.c:373: error: variable ‘pci_frontend_ops’
> has
> > initializut incomplete type
> > drivers/pci/xen-pcifront.c:374: error: unknown field ‘enable_msi’
> > specified in ializer
> > drivers/pci/xen-pcifront.c:374: warning: excess elements in struct
> > initializer
> > drivers/pci/xen-pcifront.c:374: warning: (near initialization for
> > ‘pci_frontend_op)’
> > drivers/pci/xen-pcifront.c:375: error: unknown field ‘disable_msi’
> > specified in ializer
> > drivers/pci/xen-pcifront.c:375: warning: excess elements in struct
> > initializer
> > drivers/pci/xen-pcifront.c:375: warning: (near initialization for
> > ‘pci_frontend_op)’
> > drivers/pci/xen-pcifront.c:376: error: unknown field ‘enable_msix’
> > specified in ializer
> > drivers/pci/xen-pcifront.c:376: warning: excess elements in struct
> > initializer
> > drivers/pci/xen-pcifront.c:376: warning: (near initialization for
> > ‘pci_frontend_op)’
> > drivers/pci/xen-pcifront.c:377: error: unknown field ‘disable_msix’
> > specified intializer
> > drivers/pci/xen-pcifront.c:377: warning: excess elements in struct
> > initializer
> > drivers/pci/xen-pcifront.c:377: warning: (near initialization for
> > ‘pci_frontend_op)’
> > drivers/pci/xen-pcifront.c: In function ‘pci_frontend_registrar’:
> > drivers/pci/xen-pcifront.c:383: error: ‘xen_pci_frontend’ undeclared
> > (first use his function)
> > drivers/pci/xen-pcifront.c:383: error: (Each undeclared identifier is
> > reported only once
> > drivers/pci/xen-pcifront.c:383: error: for each function it appears in.)
> > make[2]: *** [drivers/pci/xen-pcifront.o] Error 1
> > make[1]: *** [drivers/pci] Error 2
> > make: *** [drivers] Error 2
>
> > Kindly let me know how to proceed on this.
>
> > Thanks
>
>
>
> --
> Best regards,
>  Sander                            mailto:linux@eikelenboom.it
>
>

[-- Attachment #1.2: Type: text/html, Size: 5141 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel